Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections Description The is a switching regulator with a wide input voltage range, high effi ciency and a low profi le, pin-less SMD package. Two low-ripple put voltages are available as standard: 3.3V or 5V with ma continuous put current rating over the full operating temperature range of - C to +75 C with derating. An enable connection allows power sequencing or very low standby consumption (3.5µA) for battery powered applications. These modules can be SMD refl ow soldered. The connection pads have corner half-vias to enable optical inspection of the joints after soldering. Non Isolated Power Module Selection Guide Part Input Output Output Efficiency Number Voltage Range Voltage Current typ. [VDC] [VDC] [ma] [%] 3.3-.5SMD-R 5-36 3.3 73-84 5.-.5SMD-R 9-36 5. 79-87 Model Numbering - SMD-R Output Voltage Output Current Packaging (1) Notes: Note1: suffi x -R for tape&reel packaging Ordering Examples: 3.3-.5SMD-R = 3.3V,.5A Output Current, SMD, tape and reel packaging www.recom-power.com REV.: 4/19 I-1
BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range nom. Vin= 12VDC and 24VDC 5VDC 36VDC Input Current Quiescent Current Minimum Load (2) % ON/OFF max. Vin= 5VDC DC-DC ON DC-DC OFF ma 5mA Open or >1.75VDC or <.7VDC Standby Current DC-DC OFF 3.5µA 6.5µA Internal Operating Frequency Output Ripple and Noise MHz BW mvp-p 3.3-.5SMD 6kHz Efficiency vs. Load Ripple vs. Load 5Vin Efficiency [%] Ripple [mv] 5Vin 5.-.5SMD Efficiency vs. Load Ripple vs. Load Efficiency [%] Ripple [mv] 9Vin 9Vin www.recom-power.com REV.: 4/19 I-2
REGULATIONS Output Accuracy ±5.% max. Line Regulation low line to high line ±1.% max. Load Regulation (2) % to % load ± 3.% typ. Transient Response % to % load % to % load Notes: Note2: Operation below % load will not harm the converter, but specifi cations may not be met ±mv ±mv PROTECTIONS Short Circuit Protection (SCP) automatic recovery Short Circuit Input Current ma max. Over Current Protection (OCP) >9mA typ. Hiccup mode Optional Diode Protection Circuit Add a blocking diode to V if current can fl ow backwards into the put, as this can damage the converter when it is powered down. The diode can either be fi tted across the device if the source is low impedance or fi tted in series with the put (recommended). Optional Protection 1: Optional Protection 2: xx- 5.SMD xx- 5.SMD = - V sd forward ENVIRONMENTAL Operating Temperature Range with derating @ free air convection (see graph) - C to +85 C Operating Humidity non-condensing 5% - 95% RH max. MTBF according to MIL-HDBK-217F, G.B. +25 C x 3 hours Derating Graph (@ free air convection) - - - - 75 85 Ambient Temperature [ C] www.recom-power.com REV.: 4/19 I-3
SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard RoHs 2+ RoHS-11/65/EU + AM-15/863 EAC RU-AT.49.9571 TP TC 4/11 EMC Compliance Condition Standard / Criterion Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement EMC Filtering Suggestion according to EN532 Class A and Class B with external fi lter EN532, Class B L1 in in xx-.5smd C2 Component List Class A and B C2 L1 1µF 1µF 33µH The capacitors used are ceramic capacitors, rated voltage V DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material PCB FR4, (UL94 V-) Package Dimension (LxWxH) 12.5 x 13.5 x 4.mm Package Weight 1g typ. Dimension Drawing (mm) 12. Pin 2 13. 4 3 Bottom View 1 2 2. 4. Recommended Footprint Details.25 2. 2. 1 2 Top View 4 3 Pin Connections Pin # Single 1 in 2 3 4 Tolerance: xx.xx= ±.25mm.25 www.recom-power.com REV.: 4/19 I-4
INSTALLATION AND APPLICATION Standard Application Circuit xx-.5smd Application Examples High Efficiency, Isolated, Dual Unregulated Output (1:1) xx-.5smd Com - Isolated dual put - Wide Input Range Isolated (up to 6kVDC), Wide Input Range Regulated Output REC5/4812DRWZ/H6/A/SMD +24V xx-.5smd +3.3V R1 R2 C3 C2 - High isolation voltage - Improved loading / line regulation - Wide input voltage range - Point-of-load architecture V Power Sequencing 24V 3.3V t PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tape and reel (carton) 355. x 342. x 36.mm Packaging Quantity tape and reel pcs Tape Width 24mm Storage Temperature Range -55 C to +125 C Storage Humidity 95% RH max. The product information and specifications may be subject to changes even with prior written notice.the product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications with RECOM s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 4/19 I-5