MICRO SURFACE MOUNT GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE 400~000 Volt CURRENT.2 Amper FEATURES Glass Passivated Chip Junciton Ideally Suited for Automatic Assembly Save Space On Printed Circuit Boards Ultra Thin Profile Package for Space Constrained Utilization Low Forward Voltage Drop Plastic Material : UL Flammability Classification Rating 94V-0 Lead free in compliance with EU RoHS 20/65/EU directive Green molding compound as per IEC6249 Std.. (Halogen Free) MECHANICAL DATA Case : TDI, Plastic Terminals : Solderable per MIL-STD-750, Method 2026 Polarity : As Marked on case Weight : 0.003 ounces, 0.089 grams (Approx.) Marking : Part number ABSOLUTE MAXIMUM RATINGS (If not specified TA=25 o C) PARAMETER SYMBOL TB4S-2 TB6S-2 TB8S-2 TB0S-2 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 400 600 800 000 V Maximum RMS Voltage VRMS 280 420 560 700 V Maximum DC Blocking Voltage VDC 400 600 800 000 V Maximum Average Rectified Forward Current I F(AV).2 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load I FSM 50 A I 2 t Rating for fusing (t<8.3ms) I 2 t 0.375 A 2 sec Operating Junction Temperature Range TJ 50 o C Storage Temperature Range TSTG -55 to +50 o C ELECTRICAL CHARACTERISTICS (If not specified TA=25 o C) PARAMETER SYMBOL CONDITIONS MAX. UNIT Forward Voltage V F I F=.2A,Pulse measurement, Rating of. V Reverse Current I R At VRRM,Pulse measurement, Rating of 5 μa Typi ca l the rma l Resistance Per Diode R θjc Junction to case (Note ) 25(typ.) R θja Junction to ambient (Note 2) 60(typ.) O C/W NOTE :. Mounted on a FR4 PCB, single-sided copper, with 00cm 2 copper pad area. 2. Mounted on a FR4 PCB, single-sided copper, mini pad. PAGE.
I F, Forward Current (A).4.2 0.8 0.6 0.4 0.2 0 0 25 50 75 00 25 50 T C, Case Temperature ( C) C J, Junction Capacitance (pf) 00 0 0 00 V R, Reverse Bias Voltage (V) Fig. Forward Current Derating Curve Fig.2 Typical Junction Capacitance I R, Reverse Current (μa) 00 T J = 50 C 0 T J = 25 C 0. T J = 75 C 0.0 T J = 25 C 0.00 00 200 300 400 500 600 700 800 Rated Peak Reverse Voltage (V) Fig.3 Typical Reverse Characteristics I F, Forward Current (A) 0 T J = 50 C T J = 25 C T J = 75 C 0. T J = 25 C 0.0 0.4 0.6 0.8 V F, Forward Voltage (V) Fig.4 Typical Forward Characteristics ics I FSM, Peak Forward Surge Current (A) 60 50 40 30 20 0 0 0 0 20 30 40 50 60 70 80 90 00 Number Of Cycles At 60 Hz Fig.5 Maximum Non-Repetitive Peak Forward Surge Current Uni-Directional Use Only PAGE. 2
MOUNTING PAD LAYOUT 0.57 (4.00) 0.065 (.65) 0.037 (0.95) 0.23 (5.87) ORDER INFORMATION Packing information T/R - 4K per 3" plastic Reel T/R - K per 7" plastic Reel PAGE. 3
Part No_packing code_version TB4S-2_R_0000 TB4S-2_R2_0000 For example : RB500V-40_R2_0000 Part No. Serial number Version code means HF Packing size code means 3" Packing type means T/R Packing Code XX Version Code XXXXX Packing type st Code Packing size code 2 nd Code HF or RoHS st Code 2 nd ~5 th Code Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING A N/A 0 HF 0 serial number R 7" RoHS serial number B 3" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) U D PAGE. 4
Disclaimer Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. PAGE. 5