Club Scrap Special Edition From the Heart Supplies: From the Heart Kit From the Heart Unmounted Rubber Stamps Tools: Adhesive Scissors Tape Paper Trimmer Memories Chalk Red Ink Stylus Tool with Blender Tip Bone Folder Paper Piercing Tool and Cork Board Pencil Glue Lines Fold all cards carefully along the pre-scored lines. For best results, the bump of the score line should be folded into the inside of the card. Be sure that the edges of the card are perfectly aligned prior to making the fold. Reinforce all folds with a bone folder. The edges of the cards, panels and die cuts have been defined with red or black ink. Instructions to ink edges are not included below.
Club Scrap Special Edition From the Heart Page 2 of 10 Set A: 4.25x5.5 Tri-fold Window Cards with 4x5.25 Red Panels Place an opened tri-fold card smooth side up on your work surface. Apply red or black ink to the edge of the left die cut window with a stylus tool. Repeat for the remaining nine tri-fold cards. The inked edge will provide contrast between the two die cut windows when the card is folded. Card #1 4.25x5.5 Tri-fold Window Card with Red Panel Grey Die Cut: You Complete Me Waxed Linen Thread Beads 1. Attach a length of waxed linen thread onto the top and bottom of the Grey tag. Thread linen with beads and attach securely to the smooth side of the center die cut panel of the Grey card. 2. Seal the window panels together. Stamp the bracket above and below the window with black ink. 3. Stamp Sending Love onto the Red panel and attach inside the card. Card #2 4.25x5.5 Tri-fold Window Card Re Die Cut: You Are My Happy Place Beads Waxed Linen Thread 1. Tie waxed linen onto the top and bottom of the Red die cut. Thread with several seed beads and tape securely to smooth side of the center die cut window of the Grey card. 2. Fold and seal the window panels together. Stamp the bracket image above and below the die cut window with black ink. 3. Stamp Sending Love in the inside of the card. (Do not attach the Red panel.)
Club Scrap Special Edition From the Heart Page 3 of 10 Card #3 4.25x5.5 Tri-fold Window Card with Red Panel Grey Die Cut: You Are My Happy Place Waxed Linen Threads Seed Beads 1. Tie a length of waxed linen thread to the top and bottom of the Grey die cut tag. Thread with seed beads and tape thread securely to the smooth side of the die cut center panel of the Grey card. 2. Fold and seal the window panels. 3. Stamp the perimeter of the card with leaves from the UM Cherub image with black ink. Card #4 4.25x5.5 Tri-fold Window Card with Red Panel Red Die Cut: Always Together/Cherish and Adore Heart Shaped Brad Black and Red Ink Stylus Tool 1. Fold and secure die cut window panels. 2. Fold the Red die cut in half along the perforated line; attach to the upper portion of the die cut frame with adhesive. (Be sure that the tag folds over the window so that it can be seen from the front and back.) 3. Pierce through the card at the position of the hole in the tag and secure a heart shaped brad. 4. Stamp the winged heard on the lower right corner of the front of the card. Color the heart with the stylus tool and red ink. 5. Attach the red panel to the inside of the card. Stamp the winged heart onto the panel so that it can be seen through the window. Color the heart with red ink.
Club Scrap Special Edition From the Heart Page 4 of 10 Card #5 4.25x5.5 Tri-fold Window Card with Red Panel Grey Die Cut: Together Forever /Hearts Heart Shaped Brad 1. Fold and secure die cut window panels. 2. Fold the Grey die cut in half along the perforated line. Attach to the bottom half of the die cut window with adhesive. 3. Pierce through the card at the position of the hole in the tag and secure a heart shaped brad. 4. Attach the Red panel to the inside of the card. Stamp adore within the window frame with black ink. Card #6 4.25x5.5 Tri-fold Window Card with Red Panel Red Die Cuts: (2) Swirls White Cut Aparts: I Love You (2) Black Brads 1. Secure the two Red die cuts to the top and bottom of the largest die cut window with a black brad. Fold and secure the die cut window panels. 2. Stamp the bracket image onto the left and right side of the die cut windows with black ink. 3. Attach the Red panel to the inside of the card. 4. Trim the I Love You cutapart carefully with a scissors. Mark the location of the die cut window onto the Red panel lightly with a pencil. Secure the I Love You image onto the Red panel, using the pencil marks to center the image. Erase the guide marks.
Club Scrap Special Edition From the Heart Page 5 of 10 Card #7 4.25x5.5 Tri-fold Window Card with Red Panel White Cut Aparts: Be My Valentine Heart Shaped Brad 1. Determine the front of the card. Stamp Cherish, Adore, and the Winged Heart images onto the card with black ink. 2. Secure a heart shaped brad to the center of the winged heart. 3. Fold and secure the die cut window panels. 4. Attach the Red panel to the inside of the card. Layer the Be My Valentine image within the window area. Card #8 4.25x5.5 Tri-fold Window Card Red Die Cut: All Because Two People Red Grosgrain Ribbon (2) Silver Brads UM Images 1. Secure the Red die cut onto the back side of the largest die cut window with tape. Thread with grosgrain ribbon and secure ribbon onto the front of the card with two brads. Cut ribbon at an angle. 2. Fold and secure the die cut window panels. 3. Stamp UM greetings onto the inside of the card with black ink. (Do not attach a Red panel to the inside of the card.)
Club Scrap Special Edition From the Heart Page 6 of 10 Card #9 4.25x5.5 Tri-fold Window Card with Red Panel Red Die Cut: You Gave My Heart Wings Red Grosgrain Ribbon 1. Thread grosgrain ribbon through the Red die cut and suspend between the two die cut frames. 2. Stamp the bracket image above the die cut window with black ink. 3. Attach the Red panel to the inside of the card and stamp with your favorite UM greeting. Card #10 4.25x5.5 Tri-fold Window Card with Red Panel Red Die Cut: I {Heart} You Red Grosgrain Ribbon 1. Stamp the front panel of the card repeatedly at an angle with the UM quote image and black ink. Stamp the UM bracket image on the left and right side of the die cut window with black ink. 2. Thread grosgrain ribbon onto each end of the Red die cut tag. Secure the ribbon between the layered die cut windows, keeping the die cut on the front of the card. 3. Attach the Red panel to the inside of the card and stamp with your favorite greeting.
Club Scrap Special Edition From the Heart Page 7 of 10 Set B: 5x7 Red Card with 4.75x6.75 White Panels Card #1 and #2 WM Stamp Image Black and Red Ink Stylus Tool with Blender Tip 1. Stamp the WM image onto the upper center of the White panel with black ink. 2. Add red ink to the heart image with the tip of the stylus tool. Avoid applying ink to the center of the heart. 3. Attach the panel to the card. 4. Repeat steps to make a second card. Card #3 and #4 Red Grosgrain Ribbon Glue Lines 1. Stamp the UM image into the upper center of the White panel with black ink. 2. Tie a small bow with grosgrain ribbon and attach to the card with a Glue Line. 3. Repeat steps to make a second card.
Club Scrap Special Edition From the Heart Page 8 of 10 Card #5 and #6 4x5.25 Red Panel Stencil Stylus Tool 1. Trim the 4.75x6.75 White panel in half horizontally at 3-3/8. 2. Cut the 4x5.25 Red panel in half horizontally at 2-5/8. 3. Stamp the cherub onto the lower half of the 2-5/8x4 vertical Red panel with black ink. Stamp the Sending Love greeting above the cherub. 4. Layer the Red panel onto the White panel and attach to the upper center of the card. Stencil onto the lower center of the card with black ink. 5. Repeat steps 1-4 to make a second card. Card #7 Red Die Cuts: The King Grey Die Cuts: The Queen (2) Black Brads Black ink 1. Stamp the UM king s crown image along the right edge of the White panel with black ink. Stamp the UM queen s crown along the left edge. 2. Attach the Red and Grey die cut to the card as shown, and insert a black brad into the center of each tag opening. 3. Stamp the UM bracket image on the left side of The King tag and on the right side of The Queen tag.
Club Scrap Special Edition From the Heart Page 9 of 10 Card #8 Red Die Cuts: The Queen Grey Die Cuts: The King (2) Black Brads Black ink 1. Stamp the UM king s crown image along the right edge of the White panel with black ink. Stamp the UM queen s crown along the left edge. 2. Attach the Red and Grey die cut to the card as shown, and insert a black brad into the center of each tag opening. 3. Stamp the UM bracket image on the left side of The King tag and on the right side of The Queen tag. Card #9 Red Die Cut: I Love you Grey Die Cut: Live Well Stencil Stylus Tool 1. Attach the Red and Grey die cuts to the center of the horizontal White panel. 2. Stencil the bracket image onto the left and right sides of the die cuts. 3. Attach the White panel to the Red card.
Club Scrap Special Edition From the Heart Page 10 of 10 Card #10 Grey Die Cut: Be Mine Valentine Heart Shaped Paper Clip 1. Stamp the cherub image onto the upper right side of a horizontal White panel, and the I Love You verse onto the left side with black ink. 2. Trim the ends from the Grey die cut; attach the heart-shaped paper clip to the top left edge. Layer the die cut onto the lower half of the panel. 3. Attach the White panel to the Red card.