42-09-0009 3 Jaw Chuck Adaptor, Jacobs to quick coupling, incl. Wrench 42-09-0010 3 Jaw Chuck Adaptor, Jacobs to Quagrangular, incl. Wrench 42-09-0011 3 Jaw Chuck Adaptor, 3 Jaw to Quadrangular, incl. Wrench 42-09-0007 3 Jaw Chuck Adaptor, 3 Jaw to Quick Coupling, incl. Wrench 42-09-0015 3 Jaw Chuck Adaptor, 3 Jaw to "Borchardt", incl. Wrench 42-09-0005 3 Jaw Chuck Stainless, 0-6.5 mm 42-09-0036 Jacobs 3 Jaw Chuck Stainless, 0-6.3 mm 42-09-0040 Adaptor for Jacobs Chuck to Quick Coupling.101
Drill Bits and Tap Handles complete 42-09-0036 Jacobs Chuck 42-09-0910 Wrench for Jacobs Chuck 42-09-0090 Tap Handle for Jacobs Chuck 42-09-0089 T-Handle 42-09-0094 Tap Handle for AO-Shaft 42-09-0096 Tap Handle for Dental Shaft 42-09-0092 Tap Handle for AO Shaft 42-09-0013 Tap Handle for quick coupling for flexible reamers.102
Instruments for Screw Fixation Countersinks For preparing the seat of the screw head 42-09-0100 For Mini-Screws Ø 1.5 mm and Ø 2.0 mm Tip Ø 1.1 mm 42-09-0102 For Small Screws Ø 2.7 mm, Ø 3.5 mm and Ø 4.0 mm Tip Ø 2.0 mm 42-09-0104 For Malleolar Screws Tip Ø 3.2 mm 42-09-0106 For large Screws Ø 4.5 mm and Ø 6.5 mm Tip Ø 4.5 mm 42-09-0110 42-09-0112 42-09-0114 Depth Gauge for Mini Screws Depth Gauge for Small Screws Depth Gauge for Large Screws 42-04-0184 Screw Forceps 42-09-0116 Sharp Hook for checking alignment of fracture ends and removing ingrown tissue in screw head.103
42-09-0140 42-09-0142 42-09-0146 for hexagonal Head 1.5 mm 20 cm length 2.5 mm 20 cm length 3.5 mm 20 cm length 42-09-0148 for Philips Head 20 cm length 42-09-0150 for Single Head 20 cm length 42-09-0151 17.5 cm 42-09-0152 for slotted Head 20 cm length 42-09-0158 42-09-0160 42-09-0162 42-09-0164 A Screwdriver Williams for Philips Head B Screwdriver Williams for Slotted Head C Screwdriver Williams for Single Head D Screwdriver Williams for Hexagonal Head 3.5 mm.104
42-09-0171 Holding Sleeve Ø 1.5 mm 42-09-0173 Holding Sleeve Ø 2.5 mm 42-09-0170 Screwdriver for Mini Screws 42-09-0172 Screwdriver 42-09-0174 Screwdriver shaft 2.5 mm 42-09-0176 Screwdriver shaft 3.5 mm 42-09-0178 Screwdriver shaft 1.5 mm 42-09-0214 KARDANVERLÄNGERUNG LANG CARDAN JOINT LONG 42-09-0201 KLINGEN-ADAPTER MIT T-GRIFF T-HANDLE FOR INSERTS 42-09-0202 SCHRAUBENDEHERGRIFF SCREW DRIVER HANDLE 42-09-0203 42-09-0204 42-09-0205 42-09-0206 42-09-0207 42-09-0208 42-09-0209 42-09-0210 42-09-0211 KLINGE SW / Blade A/F 2,5MM KLINGE SW / Blade A/F 3,0MM KLINGE SW / Blade A/F 3,5MM KLINGE SW / Blade A/F 4,0MM KLINGE SW / Blade A/F 4,5MM KLINGE SW / Blade A/F 5,0MM KLINGE Einschlitz / Blade single slot KLINGE Phillips gross / Phillips large KLINGE Phillips klein / Phillips small.105
42-09-0250 Mini Drill Sleeve Drill Bit Ø 1.1 mm and Ø 1.5 mm 42-09-0252 Drill Guide and Drill Sleeve Ø 2.0 mm with 3 and 1 hole respectively Drill Bit Ø 2.0 mm 42-09-0254 Tap Sleeve Ø 3.5 mm Drill Sleeve Ø 2.5 mm for Drill Bit and Tap for 3.5 mm Cortex Screws with fine thread 42-09-0256 Tap Sleeve Ø 3.5 mm for Taps Ø 3.5 mm and Ø 2.7 mm May also be used as a Guide for Ø 3.2 mm Drill Bits 42-09-0258 Pointed Drill Guide.106
Instruments for Screw Fixation 42-09-0260 Tap Sleeve Ø 4.5 mm for Taps Ø 6.5 mm. May also be used as a Drill Guide for Ø 4.5 mm Drill Bits The notched tip prevents slipping on the bone. Use Sleeve Ø 8 mm in the screw holes of plates. 42-09-0262 Drill Guides for Round-Hole Plates, for Drill Bit Ø 3.2 mm Standard, 40 mm. 42-09-0266 42-09-0268 42-09-0270 42-09-0272 Neutral and Load Drill Guide, 2.0 mm for 2.0 mm screws. Use Drill Bit Ø 1.5 mm Neutral and Load Drill Guide, 2.7 mm for 2.7 mm screws. Use Drill Bit Ø 2.0 mm Neutral and Load Drill Guide, 3.5/1.25 mm for 3.5 mm Cortex Screws with fine thread. Use Drill Bit Ø 2.5 mm Neutral Load Drill Guide, 4.5 mm for 4.5 mm screws. Use Drill Bit Ø 3.2 mm 42-09-0276 42-09-0278 42-09-0280 Insert Drill Sleeve 0 2.7 / 2.0 mm for 2.7 mm Cortex Lag Screws. Use Drill Bit Ø 2.0 mm Insert Drill Sleeve 0 3.5 / 2.5 mm for 3.5 mm Cortex Lag Screws. Use Drill Bit Ø 2.5 mm Insert Drill Sleeve 0 4.5 / 3.2 mm for 3.5 mm Cortex Lag Screws with fine thread. Use Drill Bit Ø 3.2 mm 42-09-0284 C-Clamp Drill Guide with thread for Drill Bit Ø 4.5 mm.107
42-09-0290 DLP Hip Drill Guide, 60 mm. Use Drill Bit Ø 3.2 mm 42-09-0264 Drill Guide for Round Holes Plate, 60 mm long for hip operations. Use Drill Bit Ø 3.2 mm 42-09-0294 Triple Drill Guide Angle 130 for all 130 angled plates. Use Drill Bit Ø 3.2 mm 42-09-0298 Impactor 42-09-0296 Chisel Guide 42-09-0302 Condylar Plate Guide 42-09-0300 Reamer with end for quick coupling.108
42-09-0304 Slotted Hammer 42-09-0306 Inserter / Extractor 42-09-0308 Seating Chisel for preparing blade channel for Adult Angled Plates with U-profile. Shaft and Blade width 16 mm 42-09-0310 Quadrangular Positioning Plate 110 / 90 / 90 / 70 42-09-0312 Triangular Positioning Plate 100 / 60 / 20 42-09-0314 Triangular Positioning Plate 80 / 70 / 30 42-09-0316 Triangular Positioning Plate 90 / 50 / 40.109
42-09-0320 Seating Chisel 11 mm 42-09-0322 Seating Chisel 7 mm 42-09-0324 Inserter for Adolescent and Child Hip Plates Positioning Plates 42-09-0325 Triangular for children 90 / 50 / 40 42-09-0326 Triangular for children 80 / 70 / 30 42-09-0327 Triangular for children 100 / 60 / 20 42-09-0328 Quadrangular for children 110 / 90 / 90 / 70.110
42-09-0330 Drill Guide for Ø 4.5 mm screws Drill Bit Ø 4.5 mm and Ø 3.2 mm 42-09-0332 Drill Guide for Ø 6.5 mm screws Drill Bit Ø 3.2 mm 42-09-0334 Drill Guide 3.5 mm for neutral and compression positioning, Drill Ø 2.5 mm 42-09-0336 Drill Guide 42-09-0338 Drill Guide 4.5 / 3.2 mm with 2 inserts.111
Bending Instruments for Plates 42-09-0402 42-09-0404 14.5 cm Bending Iron for 3.5 mm Reconstruction Plates for 2.7 mm Reconstruction Plates 42-09-0400 Bending Iron for Mini- and Finger Plates 42-09-0406 Bending Pliers for 1.5 and 2.0 mm Plates 42-09-0408 Bending Pliers 24 cm, for 2.7 and 3.5 mm Plates 42-09-0410 Bending Pliers.112
Bending Instruments for Plates 42-09-0416 Bending Iron for Standard Plates 4 mm and 6 mm 42-09-0418 Bending Pliers for straight Plates 42-09-0420 Plate Bending Press.113
42-09-0432 Socket Wrench width across flats 11 mm (not to be used to apply tension) 42-09-0430 Drill Sleeve for Tension Device for Drill Bit Ø 3.2 mm 42-09-0438 Combination Wrench width across flats 11 mm for Tension Device, External Fixator, Medullary Nailing Instruments etc. 42-09-0436 8 mm Screw Type Compression Device 42-09-0442 Pin Wrench for Tension Device and Distractor 42-09-0440 Articulated Tension Device with indicator, span 20 mm. May also be used for distraction of Standard and Small Plates.114
42-T-0910 70-7612-07 42-T-0112 General Instrument Set Aluminium Case Trays (2) 41-0219 41-0222 42-09-0660 41-0226 42-09-0776 41-0390 41-0391 41-0384 41-0632 42-09-0766 42-09-0768-42-09-0772 41-1053 Hohmann Retractors Blade width 8 mm, short narrow tip Blade width 18 mm, short narrow tip Blade width 18 mm, short narrow tip for Hip Surgery Blade width 24 mm, long, wide tip for Hip Surgery Wrench for Chisel Handle Periosteal Elevators Medium straight blade, straight edge, width 14 mm Medium curved blade, round edge, width 14 mm Small, curved blade, round edge, width 6 mm Hammer 500 gramms Chisel Handle, synthetic, autoclavable Chisel Blades 1 ea: 10, 16 and 25 mm Gouge, straight, width 10 mm for Cancellous Bone Grafts.115
Standard Bone Forceps Set 42-T-0920 70-7612-07 42-T-0112 Standard Bone Forceps Set Aluminium Case Trays (2) 42-09-0584 42-09-0586 42-09-0588 41-1318 41-1317 42-09-0604 Self Centering Bone Holding Forceps, size 1, 240 mm long Self Centering Bone Holding Forceps, size 2, 260 mm long Self Centering Bone Holding Forceps, size 3, 280 mm long Reduction Forceps, large, 240 mm long Reduction Forceps, small, 160 mm long Reduction Forcepswith points, 200 mm long.116
42-09-0580 42-09-0582 42-09-0584 42-09-0586 Self centering Bone Holding Forceps with Thread Lock For small Fragments 150 mm, jaw 9 mm Size 0, 190 mm, extra small jaw 10 mm Size 1, 240 mm, small jaw 14 mm Size 2, 260 mm, medium jaw 18 mm 42-09-0600 Forceps with ratchet fixation 145 mm 42-09-0588 Size 3, 280 mm,large jaw 23 mm 41-1318 Reduction Forceps with Thread Lock 240 mm 41-1317 Reduction Forceps with Thread Lock 160 mm 42-09-0602 180 mm, 7".117
41-1313 Reil Forceps 170 mm 42-09-0604 Reduction Forceps with points 200 mm 42-09-0624 For Fingers, with Drill guide for Kirschner Wires up to Ø 1.0 mm, 150 mm 42-09-0622 Malleolar Forceps.118
Regular Forceps modified Reposition Forceps 42-09-0618 Repositioning Forceps 23 cm.119
Bone Holding Forceps 42-09-0632 42-09-0634 42-09-0636 42-09-0638 Ulrich 23 cm, 9" Ulrich 25 cm, 10" Ulrich 28 cm, 11" Ulrich mini 19 cm, 7½" 42-09-0640 42-09-0642 Ulrich 26 cm Ulrich 19 cm 42-09-0644 Charnley Bone Forceps Set includes: Hooked Jaws: 1 pair Serrated Jaws: 3 pairs sizes 32, 51 and 57 mm.120
Ed. 07/2015 41-0219 width 8 mm, short, narrow tip 41-0105 Small, width 6 mm, short, narrow tip 41-0106 Small, width 8 mm, short, narrow tip 42-09-0654 For Small Fragments with broad shank 41-0222 24 cm, width 18 mm, tip 4 mm 42-09-0660 width 18 mm, long, narrow tip, for Hip Surgery 41-0240 width 43 mm 41-0241 width 70 mm, narrow tip 42-09-0670 width 43 mm, long shank, angled.121
42-09-0674 width 22 mm, wide tip 41-0226 long, wide tip, for Hip Surgery, width 24 mm BENETT 41-0270 44 mm 41-0271 64 mm 24 cm, 9½" LANGE-HOHMANN 41-0202 A= 11 mm, B= 30 mm 26.5 cm, 10½" 41-0204 A= 12 mm, B= 33 mm 29 cm, 11½" BLOUNT 41-0262 Retractor for Knee, 27 cm, 10½" 41-1903 Retractor for Knee, 17.5 cm, 6¾".122
Periosteal elevators with synthetic handle, autoclavable 41-0390 Medium straight blade, round edge, width 14 mm 41-0391 Medium curved blade, round edge, width 14 mm 41-0387 Large straight blade, round edge, width 20 mm 41-0388 Medium curved blade, round edge, width 13 mm 41-0384 Small curved blade, round edge, width 6 mm 41-0383 Small curved blade, straight edge, width 6 mm 41-0385 Extra small curved blade, straight edge, width 3 mm 41-0382 Small straight blade, straight edge, width 6 mm.123
42-09-0767 spare screw Chisel Blade 42-09-0768 10 mm 42-09-0770 16 mm 42-09-0772 25 mm 42-09-0774 5 mm 42-09-0778 42-09-0780 42-09-0782 42-09-0784 10 mm 16 mm 25 mm 5 mm 42-09-0776 Wrench for Chisel Blade 42-09-0766P Chisel Handle PPSU 41-0710 41-0712 41-0714 41-0715 41-0716 41-0718 12.5 mm, 5" 4 mm 6 mm 8 mm 10 mm 12 mm 15 mm 41-0720 41-0722 41-0723 41-0724 41-0725 41-0726 16 cm, 6¼" 4 mm 6 mm 8 mm 10 mm 12 mm 15 mm 20 mm MINI-LAMBOTTE.124
41-1043 Gouge for removing broken screws, 220 mm, 8¾" ZIELKE 41-1071 5.5 mm 41-1073 9.0 mm Gouge for scoliosis operations, 230 mm, 9" Chisel Gouge Gouges 41-1051 5 mm 41-1053 10 mm 41-1055 15 mm 25 cm, 10", straight 41-1061 5 mm 41-1063 10 mm 41-1065 15 mm 25 cm, 10", curved LEXER (FLAT) 41-1020 7 mm 41-1021 10 mm 41-1022 15 mm 41-1023 20 mm 41-1024 25 mm 41-1025 30 mm 22 cm, 8¾" LEXER (HOLLOW) 41-1030 7 mm 41-1031 10 mm 41-1032 15 mm 41-1033 20 mm 41-1034 25 mm 41-1035 30 mm 22 cm, 8¾".125
GIPSSCHEREN PLASTER SCISSORS CIZALLAS PARA VENDAJES ENYESADOS CISEAUX A PLATRE 42.10 Ed. 3.1 12/2012 gezahnt serrated dentadas dentelés gezahnt serrated dentadas dentelés WALTON 40-0110 20 cm, 8" ESMARCH 40-0130 20 cm, 8" ASAL 40-0188 40-0190 14.5 cm, 5¾" 17 cm, 6½" glatt smooth liso lisse gezahnt serrated dentadas dentelés BRUNS 40-0120 24 cm, 9½" BRUNS 40-0121 24 cm, 9½" UNIVERSAL BANDAGE 12-4251 18 cm, 7" 42.10.1
42.10 Ed. 3.1 12/2012 GIPSINSTRUMENTE PLASTER INSTRUMENTS INSTRUMENTOS PARA VENDAJES INSTRUMENTS A PLATRE Messer mit verstärktem Rücken with reinforced back hoja con espalda reforzada lame à dos renforcé STILLE 40-0201 40-0203 40-0211 23 cm, 9" 26 cm, 10¼" 38 cm, 15" STILLE 40-0220 26.5 cm, 10½" HOPKINS 40-0300 20 cm, 8" ESMARCH 40-0310 18 cm, 7" REINER 40-0314 18.5 cm, 7¼" ENGEL 40-0410 16 cm, 6¼" WIGMORE 40-0400 19 cm, 7½" 42.10.2
GIPSINSTRUMENTE PLASTER INSTRUMENTS INSTRUMENTOS PARA VENDAJES INSTRUMENTS A PLATRE 42.10 Ed. 3.1 12/2012 BERGMANN 40-0412 18 cm, 7" MASON 40-0506 18 cm, 7" WOLFF 40-0500 40-0502 18 cm, 7" 24 cm, 9½" BEESON 40-0530 30 cm, 12" USA 40-0515 23 cm, 9" HENNING 40-0520 27 cm, 10¾" 42.10.3