EDCRO-200 is a stable ceramic based, sampling phase locked oscillator.

Similar documents
INC. MICROWAVE. A Spectrum Control Business

HIGH-VALUE PHASE-LOCKED COAXIAL RESONATOR OSCILLATOR

Features. = +25 C, Vdc = +12V

Features. = +25 C, Vcc = +5V

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz

HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram

Features. = +25 C, Vcc = +3V

Features. = +25 C, Vcc = +5V [1]

Features. = +25 C, Vcc = +3V

Phase Locked Sources Series PDRO Dielectric Resonator Oscillators

HMC358MS8G / 358MS8GE

Features. = +25 C, Vcc(RF), Vcc(DIG) = +5V

12.17 GHz to GHz MMIC VCO with Half Frequency Output HMC1167

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2

11.41 GHz to GHz MMIC VCO with Half Frequency Output HMC1166

MMIC VCO MMVC92. MMIC VCO GHz Type Q. General Description. Features. Packages. Functional Diagram. Applications

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2

Features. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/4 RFOUT RFOUT/4

12.92 GHz to GHz MMIC VCO with Half Frequency Output HMC1169

Features. Packages. Applications

Frequency vs. Tuning Voltage, Vcc = +4.2V 17 Frequency vs. Tuning Voltage, T= 25 C FREQUENCY (GHz) FREQUENCY (GHz) Vcc = 4.

Features OBSOLETE. = +25 C, Vcc1, Vcc2 = +5.0V. Parameter Min. Typ. Max. Units Frequency Range GHz. Divided Output

Varactor-Tuned Oscillators. Technical Data. VTO-8000 Series

OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

Features. = +25 C, Vcc1, Vcc2 = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4

OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator

Product Guide. VIDA Oscillator Series. High Performance YIG Oscillator Westwind Blvd., Santa Rosa, CA Phone , FAX

Low Noise Oscillator series LNO 4800 B MHz

Frequency vs. Tuning Voltage, Vcc = +5V OUTPUT FREQUENCY (GHz) Frequency vs. Tuning Voltage, T= 25 C OUTPUT F

äìññ=êéëé~êåüi=áååk=

Features. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V

Varactor-Tuned Oscillators. Technical Data. VTO-8000 Series. Pin Configuration TO-8V

Features. = +25 C, Vcc1, Vcc2 = +3V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4

Features. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4

Features. = +25 C, Vcc1, Vcc2, Vcc3 = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz

Features. = +25 C, 50 Ohm System, Vcc = 5V. Parameter Conditions Min. Typ. Max. Units. Maximum Input Frequency GHz

Military End-Use. Phased Array Applications. FMCW Radar Systems

O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)

Glossary of VCO terms

Wave Form: Square x 20.2 x 5.88H [0.504 x x 0.231] G8 500 khz ~ 170 MHz 4 pin DIL half size

Low Phase Noise C band HBT VCO. GaAs Monolithic Microwave IC

Features. = +25 C, Vdc = +7V

EVALUATION KIT AVAILABLE 10MHz to 1050MHz Integrated RF Oscillator with Buffered Outputs. Typical Operating Circuit. 10nH 1000pF MAX2620 BIAS SUPPLY

OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator

Features. Pout: +9 dbm. Parameter Min. Typ. Max. Units

RFVC GHz to 12.1GHz MMIC VCO with Fo/2 and Fo/4 Outputs

Features. = +25 C, 50 Ohm System, Vcc= 5V

v Features = +25 C, 50 Ohm System, Vcc = 5V

WE ARE THERE WORLD LEADER IN MICROWAVE AND MM-WAVE COMPONENTS

RFVC1800 Wideband MMIC VCO with Buffer Amplifier 8GHz to 12GHz

RFVC1843TR7. 9.8GHz to 11.3GHz MMIC VCO with Fo/2 and Fo/4 Outputs. Features. Applications. Ordering Information

Features OBSOLETE. = +25 C, Vcc1 = Vcc2 = +5V

CHV3241-QDG RoHS COMPLIANT

Lead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V

= +25 C, Vcc = +3.3V, Z o = 50Ω (Continued)

CHV2240 RoHS COMPLIANT

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

Model 855 RF / Microwave Signal Generator

Features. = +25 C, +Vdc = +6V, -Vdc = -5V

FREQUENCY AGILE FM MODULATOR INSTRUCTION BOOK IB

TGV2561-SM GHz VCO with Divide by 2

GHz-band, high-accuracy SAW resonators and SAW oscillators

O C X O Oven Controlled Crystal Oscillators

Stability as AXIOM9000 plus low noise high isolation frequency distribution amplifier with 4 to 16 outputs

Products. Dielectric Resonators. Description: Specifications: Attenuation:

Features OBSOLETE. = +25 C, Vcc= 5V [1]

10MHz to 1050MHz Integrated RF Oscillator with Buffered Outputs

AOM Driver A35-Series

PART MAX2605EUT-T MAX2606EUT-T MAX2607EUT-T MAX2608EUT-T MAX2609EUT-T TOP VIEW IND GND. Maxim Integrated Products 1

Model 865 RF / Ultra Low Noise Microwave Signal Generator

OBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description

VCO Design Project ECE218B Winter 2011

Features. = +25 C, Vcc= 5V

Model 865-M Wideband Synthesizer

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Features OBSOLETE. DC GHz GHz GHz GHz GHz

Features. = +25 C, Vdc = +5V

Model 845-M Low Noise Synthesizer

Best-in-industry performance. Radar. Communication. Electronic Counter Measures. Laboratory Instrumentation. Commercial and military products

Block Upconverters for Integration in High Power Amplifiers

AOM Driver 3307 Series

VS-701 High Shock Discrete Voltage Controlled SAW Oscillator

PRELIMINARY. Logic: C = CMOS S = Sine Wave

Low Noise Oscillator series LNO 100 OCXO LNO 100

This provides extremely fast tuning speed limited primarily by the internal impedance of the user-supplied voltage driver.

9.25 GHz to GHz MMIC VCO with Half Frequency Output HMC1162

Features. The HMC-C072 is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT. = +25 C, Vdc = +7V

Features. Output Power: 2 dbm Typical Spurious Suppression: >20 dbc SSB Phase Noise: khz Offset Test Instrumentation

24-bit Step Size, Resolution 3 Hz typ Exact Frequency Mode Built-in Digital Self Test 40 Lead 6x6mm SMT Package: 36mm 2. Phased Array Applications

Features. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V

5.5 GHz to 14 GHz, GaAs MMIC Fundamental Mixer HMC558A. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM APPLICATIONS GENERAL DESCRIPTION

OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator

7 GHz INTEGER N SYNTHESIZER CONTINUOUS (N = ), NON-CONTINUOUS (N = 16-54) Features

Features. = +25 C, IF= 100 MHz, LO= +15 dbm* Parameter Min. Typ. Max. Min. Typ. Max. Units

HMC580ST89 / 580ST89E. Features OBSOLETE. DC GHz GHz GHz. db db db Gain Variation Over Temperature DC GHz 0.

Model 865-M Wideband Synthesizer

Transcription:

EDCRO-200 is a stable ceramic based, sampling phase locked oscillator. Commercial Military Airborne Space Missile Guidance Cable TV Links (CATV) Satellite Communications Low Cost External Reference Military/Commercial Applications Low Phase Noise 400 MHz to 4 GHz Spurious: -70 dbc standard Stability and close-in Phase Noise dependent on reference Local Area Networks (LAN) Global Positioning Systems (GPS) Transmitters & Receivers Up / Down Converters Test Equipment Digital Radios Point to Point Relays LMDS

1935 Jamboree Drive, Suite 164 Colorado Springs, CO 80920 Phone: 719.445.2999 Fax: 719.452.3900 sales@exodusdynamics.com www.exodusdynamics.com PARAMETER SYMBOL MINIMUM TYPICAL MAXIMUM UNITS Output Frequency Fₒ 400 4000 MHz Output Power Po +12 +13 +15 dbm Input Frequency (sub-multiple of output) Fₒ 50 100 MHz Input Power Po 0 +3 +6 dbm Operating Temperature Top 0 50 C Supply Voltage Vcc +15 V Supply Current (no load) Icc 175 ma Frequency Stability, 0 to 50 C FSTAB Reference Dependent Input VSWR VSWRi 2.0:1 Output VSWR VSWRₒ 2.0:1 Spurious Signals 70 60 dbc Harmonics 25 dbc Lock Voltage VL +5 VDC Unlock Voltage VU 0 VDC ppm Offset from Carrier 10 KHz 100 KHz I MHz 10 MHz Phase Noise Reference Dependent 125 dbc 150 dbc 160 dbc.66 1.100 ACCESS HOLE +V LOCK RF INPUT GND RF OUTPUT.102 DIA THRU 3 PLACES NOTE: Drawing not to scale COPYRIGHT 2012 EXODUS DYNAMICS, Colorado Springs CO ORDERS ACCEPTED BY EXODUS DYMANICS ARE SUBJECT TO OUR TERMS AND CONDITIONS OF SALE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Commercial EDCRO-300 is a stable ceramic based, sampling phase locked oscillator. Military Airborne Space Missile Guidance Cable TV Links (CATV) Satellite Communications Local Area Networks (LAN) Low Cost Military/Commercial Applications Low Phase Noise Internal Reference 400 MHz to 4 GHz Spurious: -70 dbc standard Stability: ±20 ppm standard, ±2 ppm optional Global Positioning Systems (GPS) Transmitters & Receivers Up / Down Converters Test Equipment Digital Radios Point to Point Relays LMDS

1935 Jamboree Drive, Suite 164 Colorado Springs, CO 80920 Phone: 719.445.2999 Fax: 719.452.3900 sales@exodusdynamics.com www.exodusdynamics.com PARAMETER SYMBOL MINIMUM TYPICAL MAXIMUM UNITS Output Frequency (Fixed) Fₒ 400 4000 MHz Output Power Po +12 +13 +15 dbm Operating Temperature Top 0 50 C Supply Voltage Vcc +15 V Supply Current (no load) Icc 200 ma Frequency Stability, 0-50 C FSTAB +17 ± 20 Ppm Output VSWR VSWRₒ 2.0:1 Spurious Signals 70 60 dbc Harmonics 25 dbc Lock Voltage VL +5 VDC Unlock Voltage VU 0 VDC Offset from Carrier 10 KHz 100 KHz I MHz 10 MHz Phase Noise -115 dbc -125 dbc -150 dbc -160 dbc.66 1.100 ACCESS HOLE +V LOCK GND RF OUTPUT.102 DIA THRU 3 PLACES NOTE: Drawing not to scale COPYRIGHT 2012 EXODUS DYNAMICS, Colorado Springs CO ORDERS ACCEPTED BY EXODUS DYMANICS ARE SUBJECT TO OUR TERMS AND CONDITIONS OF SALE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Commercial Military Airborne Space Missile Guidance Dielectric Resonator Technology Internal Voltage Regulator Phase Lock Indicator Alarm Ultra Low Phase Noise MIC And SMT Fabrication Ultra Low Microphonics Low Power Consumption Up To +25dBm Output Power Available From 1 40 GHz Operating Range -50 to +105 C Vibration/Shock Upgrade RoHS Compliant Cable TV Links (CATV) Satellite Communications Local Area Networks (LAN) Global Positioning Systems (GPS) Transmitters & Receivers Traffic Sign Post Test Equipment Digital Radios Point to Point Relay LMDS series Phase Locked Dielectric Resonator Oscillator (PLDRO) utilizes advanced MIC and SMT technology to generate crystal stability at microwave and mm-wave frequencies up to 40 GHz. The low profile and rugged construction provide excellent durability against harsh environmental conditions such as Shock/ Vibration, Temperature and Humidity. series oscillator is designed using an ultra-low noise amplifier with series feedback at source and Dielectric Resonator at the gate. High gain, low noise devices are biased and matched precisely to ensure minimum phase noise. The device is carefully matched for maximum power, minimum phase noise and Voltage Standing Wave Ratio (VSWR). The oscillator is compensated for maximum temperature stability, optimum negative resistance and lowest phase noise possible. series oscillator is buffered by cascaded low noise driver and power amplifiers for minimum load pulling, maximum isolation and power. Transistor devices, and all chip components, are directly attached to gold plated Kovar carriers to minimize shear effect and maximize device heat transfer. Kovar carriers are mounted to the chassis to provide an efficient thermal junction and a stable structure for reduction of microphonics. To ensure oscillator stability over the full temperature range, the tuning elements are precisely designed and positioned to compensate for temperature drift by a factor of three. series proprietary Phase lock loop circuitry is designed and fabricated using SMT Technology. The input reference frequency is multiplied and sampled to the output frequency to produce compensating voltage to correct any frequency drift due to temperature variations. A Hi-Frequency Wein-Bridge Oscillator is integrated to provide the necessary sweep voltage to an ultra Hi-Q tuning varactor diode for the purpose of compensation and phase locking. The unique construction of phase lock loop sub-assembly provides excellent temperature stability and minimum solder joints for maximum reliability. series is internally voltage regulated to avoid reverse bias, frequency pushing, bias modulation and voltage transients. A phase lock indicator alarm of TTL type is provided as a feature. The EDPLO-2000 series are externally locked to customer supplied reference, ranging 30-200 MHz, and factory tuned to specified output frequency. Mechanical frequency adjustment is provided for optimum phase voltage setting.

1935 Jamboree Drive, Suite 164 Colorado Springs, CO 80920 Phone: 719.445.2999 Fax: 719.452.3900 sales@exodusdynamics.com www.exodusdynamics.com Model Number EDPLO-2000-XX.XX (Where XX.XX is freq. in GHz) Single Frequency 1 to 40 GHz Mechanical Tuning Range 100 MHz Electrical Tuning N/A Power Output +13 dbm, up to +25 dbm Optional Load VSWR, Maximum 2.0 : 1.0 Power Requirements +12, +15 VDC, 220 ma Reference Input Frequency 30 to 200 MHz Reference Power Input 0 dbm Reference Power Input Range -6 to +10 dbm Frequency Stability Same as Reference Phase Noise Reference Noise + 20 Log(N)+3dB Spurious -80 dbc Harmonics -25 dbc Alarm TTL Operating Temperature -55 to +105 C Optional; 0 to 50 Standard Storage Temperature -55 to +125 C Connectors SMA Female or 2.92 mm Size x x.67 Finish Nickel SSB PHASE NOISE dbc/hz -60-70 -80-90 -100-110 -120-130 -140 1KHz 12 GHz 10KHz 50KHz 100KHz 400KHz 1MHz PHASE VOLTAGE ERROR /ALARM OSC ALARM REGULATOR EXTERNAL CRYSTAL REF. Ø DET RF OUT OFFSET FREQUENCY FROM THE CARRIER.67 PHASE VDC ALARM 1.100 EDPLO-2000-XX.XX SERIAL NO. XXXX DATE CODE XXXX RF IN 1.44 FREQ. ADJ RF OUT.50.280 MNTG HOLES.110 DIA. THRU.25 3 PLCS MNTG HOLES 2-56UNC-2B X.23 DP. 4 PLCS NOTE: Drawing not to scale Dimensions in inches COPYRIGHT 2012 EXODUS DYNAMICS, Colorado Springs CO ORDERS ACCEPTED BY EXODUS DYMANICS ARE SUBJECT TO OUR TERMS AND CONDITIONS OF SALE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Commercial Military Airborne Space Missile Guidance Dielectric Resonator Technology Internal Crystal Oscillator Reference Phase Lock Indicator Alarm Ultra Low Phase Noise MIC and SMT Fabrication Ultra Low Microphonics Low Power Consumption Up To +25 dbm Output Power Available From 1 40 GHz Operating Range -55 to +105 C Vibration/ Shock Upgrade RoHS Compliant Cable TV Links (CATV) Satellite Communications Local Area Networks (LAN) Global Positioning Systems (GPS) Up / Down Converters Transmitters & Receivers Traffic Sign Post Test Equipment Digital Radios Point to Point Relay LMDS series Phase Locked Dielectric Resonator Oscillator (PLDRO) utilizes advanced MIC and SMT technology to generate crystal stability at microwave and mm-wave bands up to 40 GHz. The low profile and rugged construction provide excellent durability against harsh environmental conditions such as Shock/ Vibration, Temperature and Humidity. series oscillator is designed using an ultra-low noise amplifier with series feedback at source and Dielectric Resonator at the gate. High gain, low noise devices are biased and matched precisely to ensure minimum phase noise. The device is carefully matched for maximum power, minimum phase noise and Voltage Standing Wave Ratio (VSWR). The oscillator is compensated for maximum temperature stability, optimum negative resistance and lowest phase noise possible. series oscillator is buffered by cascaded low noise driver and power amplifiers for minimum load pulling, maximum isolation and power. Transistor devices, and all chip components, are directly attached to gold plated Kovar carriers to minimize shear effect and maximize device heat transfer. Kovar carriers are mounted to the chassis to provide an efficient thermal junction and a stable structure for reduction of microphonics. To ensure oscillator stability over the full temperature range, the tuning elements are precisely designed and positioned to compensate for temperature drift by a factor of three. series proprietary Phase Lock Loop and Crystal Reference circuitry is designed and fabricated using SMT Technology. The input reference frequency is multiplied and sampled to the output frequency to produce compensating voltage to correct any frequency drift due to temperature variations. A Hi-Frequency Wein-Bridge Oscillator is integrated to provide the necessary sweep voltage to an ultra Hi-Q tuning varactor diode for the purpose of compensation and phase locking. The unique construction of phase lock loop sub-assembly provides excellent temperature stability and minimum solder joints for maximum reliability. series is internally voltage regulated to avoid reverse bias, frequency pushing, bias modulation and voltage transients. A phase lock indicator alarm of TTL type is provided as a feature. The EDPLO-3000 series are internally reference locked and factory tuned to specified frequency. Mechanical frequency adjustment is provided for optimum phase voltage setting. Buffered Reference Monitor and adjustment are standard features of this Hi- Tech oscillator. The unit may also be externally locked to a reference crystal oscillator.

1935 Jamboree Drive, Suite 164 Colorado Springs, CO 80920 Phone: 719.445.2999 Fax: 719.452.3900 sales@exodusdynamics.com www.exodusdynamics.com Model Number EDPLO-3000-XX.XX (Where XX.XX is freq. in GHz) Single Frequency 1 to 40 GHz Mechanical Tuning Range 100 MHz Power Output +13 dbm, up to +25 dbm Optional Load VSWR, Maximum 2.0 : 1.0 Power Requirements +12, +15 VDC, 300 ma Reference Frequency 50 to 150 MHz Frequency Stability +/- 5 PPM @ 0 to 50 C, +/-.5 PPM Optional Phase Noise See Phase Noise Envelope (Fig A) Spurious -80 dbc Harmonics -25 dbc Alarm TTL Operating Temperature -55 to +105 C Optional, 0-50 C Standard Storage Temperature -55 to +125 C Connectors SMA Female or 2.92 mm Size x x 1.25 Finish Nickel SSB PHASE NOISE dbc/hz -60-70 -80-90 -100-110 -120 12 GHz -130-140 1KHz 10KHz 50KHz 100KHz 400KHz 1MHz OFFSET FREQUENCY FROM THE CARRIER ALARM ERROR /ALARM REGULATOR Ø MON OSC Ø DET XTAL REF. REF MON RF OUT.25 1.25 1.100 EDPLO-3000-XX.XX SERIAL NO. XXXX FREQ. ADJ PHASE MON ALARM RF IN OPTIONAL RF OUT 1.44.50 XTAL BIAS XTAL ADJ REF MON.75.83 MNTG HOLES 2-56UNC-2B X.23 DP. 4 PLCS MNTG HOLES.110 DIA. THRU 3 PLCS NOTE: Drawing not to scale Dimensions in inches COPYRIGHT 2012 EXODUS DYNAMICS, Colorado Springs CO ORDERS ACCEPTED BY EXODUS DYMANICS ARE SUBJECT TO OUR TERMS AND CONDI TIONS OF SALE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Commercial Military Airborne Space Missile Guidance Dielectric Resonator Technology External Reference 5 or 10 MHz Phase Lock Indicator Alarm Ultra Low Phase Noise MIC and SMT Fabrication Ultra Low Microphonics Low Power Consumption Up To +25 dbm Output Power Available From 1 40 GHz Operating Range -55 to +105 C Vibration/Shock Upgrade RoHS Compliant Cable TV Links (CATV) Satellite Communications Local Area Networks (LAN) Global Positioning Systems (GPS) Up / Down Converters Transmitters & Receivers Traffic Sign Post Test Equipment Digital Radios Point to Point LMDS series Phase Locked Dielectric Resonator Oscillator (PLDRO) utilizes advanced MIC and SMT technology to generate crystal stability at microwave and mm-wave bands up to 40 GHz. The low profile and rugged construction provide excellent durability against harsh environmental conditions due to Shock/Vibration, Temperature and Humidity. series oscillator is designed using an ultra-low noise amplifier with series feedback at source and Dielectric Resonator at the gate. High gain, low noise GaAs FETs/BJTs are biased precisely to ensure minimum phase noise. The device is carefully matched for maximum power, minimum phase noise and Voltage Standing Wave Ratio (VSWR). The oscillator is compensated for maximum temperature stability, optimum negative resistance and lowest phase noise possible. series oscillator is buffered by cascaded low-noise driver and power amplifiers for minimum load pulling, maximum isolation and power. Transistor devices, and all chip components, are directly attached to gold plated Kovar carriers to minimize shear effect and maximize device heat transfer. Kovar carriers are mounted to the chassis to provide an efficient thermal junction and a stable structure for reduction of microphonics. To ensure oscillator stability over the full temperature range, the tuning elements are precisely designed and positioned to compensate for temperature drift by a factor of three. series proprietary Phase lock loop and Internal Multiplier circuitry uses Surface Mount Technology. The reference frequency is multiplied and sampled to output frequency. Produced error voltage due to frequency drift is sensed by a Wein-Bridge Oscillator to provide the necessary sweep voltage to an ultra Hi-Q tuning varactor diode for the purpose of compensation and phase locking. The unique construction of phase lock loop subassembly provides excellent temperature stability and minimum solder joints for maximum reliability. series is internally voltage regulated to avoid reverse bias, frequency pushing, bias modulation and voltage transients. A phase lock indicator alarm of TTL type is provided as a feature. The EDPLO-4000 series are externally locked and factory tuned to specified frequency. Mechanical frequency adjustment is provided for optimum phase voltage setting. Buffered Reference Monitor and adjustment are standard features of this Hi-Tech oscillator.

1935 Jamboree Drive, Suite 164 Colorado Springs, CO 80920 Phone: 719.445.2999 Fax: 719.452.3900 sales@exodusdynamics.com www.exodusdynamics.com Model Number EDPLO-4000-XX.XX (Where XX.XX is freq. in GHz) Single Frequency 1 to 40 GHz Mechanical Tuning Range 100 MHz Power Output +13 dbm, up to +25 dbm Optional Load VSWR, Maximum 2.0 : 1.0 Power Requirements +12, +15 VDC, 400 ma Reference Input Frequency 10 MHz or 5 MHz Optional Reference Power Input 0 +/- 6 dbm Frequency Stability Same as Reference Phase Noise Reference Noise +20 Log(N) +3db Spurious -80 dbc Harmonics -25 dbc Alarm TTL Operating Temperature -55 to +105 C Optional Storage Temperature -55 to +120 C Connectors SMA Female or 2.92 mm Size x x 1.25 Finish Nickel SSB PHASE NOISE dbc/hz -60-70 -80-90 -100-110 -120 12 GHz -130-140 1KHz 10KHz 50KHz 100KHz 400KHz 1MHz OFFSET FREQUENCY FROM THE CARRIER ALARM OSC Ø MON ERROR /ALARM REGULATOR EXTERNAL CRYSTAL REF. PHASE LOCKED VCXO Ø DET x5 x10 REF IN RF OUT.25 1.25 PHASE VDC 1.100 ALARM EDPLO-4000-XX.XX SERIAL NO. XXXX REF IN FREQ. ADJ RF OUT.50.75.83 MNTG HOLES 2-56UNC-2B X.23 DP. 4 PLCS MNTG HOLES.110 DIA. THRU 3 PLCS NOTE: Drawing not to scale Dimensions in inches COPYRIGHT 2012 EXODUS DYNAMICS, Colorado Springs CO ORDERS ACCEPTED BY EXODUS DYMANICS ARE SUBJECT TO OUR TERMS AND CONDI TIONS OF SALE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Commercial Military Airborne Space Dielectric Resonator Technology Internal Voltage Regulator 100 MHz Bandwidth Ultra Low Phase Noise MIC Fabrication Ultra Low Microphonics Low Power Consumption Up To +25dBm Output Power Available From 1 40 GHz Operating Range -55 to +105 C Vibration/Shock Upgrade RoHS Compliant Missile Guidance Cable TV Links (CATV) series Dielectric Resonator Oscillator (DRO) utilizes advanced MIC and MMIC technology to generate precise, reliable and ultra-low noise frequency at microwave and mm-wave bands up to 40GHz. The uni-package is designed to mechanically withstand harsh environmental conditions due to Shock/ Vibration, Temperature and Satellite Communications Humidity. series oscillator is designed using an ultra-low noise amplifier with series feedback at source and Local Area Networks (LAN) Global Positioning Systems (GPS) Transmitters & Receivers Up / Down Converters Test Equipment Digital Radios Point to Point Relays Dielectric Resonator at the gate. High gain, low-noise devices are biased and matched precisely to ensure minimum phase noise. The devices are carefully matched for maximum power, minimum phase-noise and Voltage Standing Wave Ratio (VSWR). The oscillator is compensated for maximum temperature stability, optimum negative resistance and lowest phase noise possible. series oscillator is buffered by cascaded low-noise driver and power amplifiers for minimum load pulling, maximum isolation and power. Transister devices, and all chip components, are directly attached to gold plated Kovar carriers to minimize shear effect and maximize device heat transfer. Kovar carriers are mounted to the chassis to provide an efficient thermal junction and a stable structure for reduction of microphonics. To ensure oscillator stability over the full temperature range, high-q low dielectric constant resonators are selected with proper temperature coefficient to compensate for frequency drift. series is internally voltage regulated to avoid reverse bias, frequency pushing, bias modulation and voltage transients. Mechanical frequency adjustments are provided for desired frequency setting within the bandwidth. series provide several advantages over other microwave signal source, such as Gunn Gravity LMDS CHARACTERISTC CRYSTAL MULIPLIER CHAIN GUNN CAVITY OSCILLATOR EDRO-1000 SERIES Reliability Efficiency Temperature Range Power Variation FM Noise Frequency Stability Environmental Stability Size GOOD LOW GOOD HIGH VERRY GOOD EXCELLENT FAIR LARGE FAIR LOW POOR HIGH EXCELLENT GOOD FAIR MEDIUM EXCELLENT HIGH EXCELLENT LOW EXCELLENT VERY GOOD EXCELLENT SMALL

1935 Jamboree Drive, Suite 164 Colorado Springs, CO 80920 Phone: 719.445.2999 Fax: 719.452.3900 sales@exodusdynamics.com www.exodusdynamics.com Model Number EDRO-1000-XX.XX (Where XX.XX is freq. in GHz) Single Frequency 1 to 40 GHz Mechanical Tuning Range 100 MHz Electrical Tuning Optional Power Output +13 dbm, up to +25 dbm Optional Load VSWR, Maximum 2.0 : 1.0 Power Requirements +15, +12, +10 VDC, 90-110 ma Power Variation +/- 0.5 dbm Pushing 1 ppm Max. @ ±1V Pulling (12dB Return Loss) +/- 90ppm Max. Frequency Stability 3 ppm/ C Phase Noise See Phase Noise Envelope (Fig. A) Spurious -85 dbc Harmonics -25 dbc Operating Temperature -55 to +105 C Optional; 0 to 70 Standard Storage Temperature -55 to +125 C Connectors SMA Female, 2.40 mm, 2.92 mm Size x.92 x.67 Finish Nickel SSB PHASE NOISE dbc/hz -60-70 -80-90 -100-110 -120-130 -140 1KHz 12 GHz 10KHz 50KHz 100KHz 400KHz 1MHz REGULATOR OSC RF OUT OFFSET FREQUENCY FROM THE CARRIER FIGURE A.67 +VTUNE GND 0.11 DIA. THRU MOUNTING HOLES 4 PLCS.92.745 FREQ. ADJ EDRO-1000-XX.XX SERIAL NO. XXXX RF OUT.50 NOTE: Drawing not to scale Dimensions are in inches.25 COPYRIGHT 2012 EXODUS DYNAMICS, Colorado Springs CO ORDERS ACCEPTED BY EXODUS DYMANICS ARE SUBJECT TO OUR TERMS AND CONDITIONS OF SALE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

Commercial Military Airborne Space Ovenized Crystal Oscillators provide high stability (0.1 ppm) in the range of 70 to 120 MHz. Built to withstand harsh environments, the EDXO-500 provides a low noise reference input complementing our DRO line. These units feature high stability, fast warmup, low power requirements, rugged military type housings and fast delivery. Missile Guidance Cable TV Links (CATV) Satellite Communications Local Area Networks (LAN) Global Positioning Systems (GPS) Transmitters & Receivers Up / Down Converters Output Frequency Range Output Level Output Waveform Phase Noise Harmonic Distortion Load Input Supply Voltage Warm-up Time Storage Temperature 70 MHz to 120 MHz +3 dbm into 50 ohms Sine-wave -150 dbc/hz @ 10KHz -15 dbc 50 ohms +12 VDC <800 ma 1 st 3 sec <230 ma next 60 sec 130 ma after warm-up <1.5 minutes from +25 C for frequency accuracy to be within ±1x10-7 of prior frequency after 24 hours off-time -55 C to +85 C Test Equipment Digital Radios Point to Point Relays MODEL NUMBER TEMP RANGE ( C) STABILITY (ppm) LMDS EDXO-500-01-X EDXO-500-05-X EDXO-500-50-X x = Frequency in MHz

Temperature Input Voltage Load Time Domain Aging < ± 0.5 ppm over 0 C to +50 C ambient < ± 3x10-8 for a ±10% change in input supply < ±1x10-8 for a ±10% change in load Short-term 1 second <3x10-11 Medium-term 24 hours < ±10-9 after 72 hours on-time Long-term <5x10-8 First Year <2x10-8 Second Year <1.5x10-8 Worst Case.000.000 1.04 1.71 2.23 2.64.812 FREQ. ADJ.469 NOTE: Drawing not to scale.000 2.64 5 2.545 MNTG. HOLES.000 THRU 4 PLCS 0.101 Dia GND 5 XTAL ADJ. SMA FEMALE 1.237 1.33 FREQ: xx.x x MHz S/N: xxx-xxx RF OUT.667 1.237 ORDERS ACCEPTED BY EXODUS DYMANICS ARE SUBJECT TO OUR TERMS AND CONDITIONS OF SALE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE