CICERONE ST.132-1ENG SPECIFICATION Range: Cicerone Design: Lorenzo Stano SMALL TABLES WITH POWDER COATED FRAME AND HPL TOP Ø 60 cm Code: 2CH610-BOB height 103,5 cm, base Ø 50 cm, top Ø 60 cm 2CH67-BOB height 71,5 cm, base Ø 50 cm, top Ø 60 cm 2CH65-BOB height 49,5 cm, base Ø 50 cm, top Ø 60 cm Description: small tables with a steel base ø 500 mm, 5 mm thick, epoxy-powder coated and covered with stainless steel, with holes in the centre to fix the stand made of ø 50 mm mat white aluminium plate; ø 600 mm circular top in thick 12 mm HPL (high pressure laminates), white on the outer surfaces and black interiors, with tapered edging. The top is fastened to the aluminum supporting frame using 4 x M6 zinc-plated screws. 103,5 cm 2CH610-BOB 71,5 cm 2CH67-BOB 2CH610-BOB 2CH67-BOB 2CH65-BOB 49,5 cm 2CH65-BOB Detail of white HPL top Pag. 1/5
SMALL TABLES WITH POWDER COATED FRAME AND HPL TOP Ø 80 cm Codes: 2CH810-BOB height 104 cm, base Ø 50 cm, top Ø 80 cm 2JCH87-BOB height 72 cm, base Ø 50 cm, top Ø 80 cm 2CH85-BOB height 50 cm, base Ø 50 cm, top Ø 80 cm Description: small tables with a steel base ø 500 mm, 10 mm thick, epoxy-powder coated and covered with stainless steel, with holes in the centre to fix the stand made of ø 50 mm mat white aluminium plate; ø 800 mm circular top in thick 12 mm HPL (high pressure laminates), white on the outer surfaces and black interiors, with tapered edging. The top is fastened to the aluminum supporting frame using 4 x M6 zinc-plated screws. 104 cm 2CH810-BOB 72 cm 2CH87-BOB 2CH810-BOB 2CH87-BOB 2CH85-BOB 50 cm 2CH85-BOB Detail of white HPL top Pag. 2/5
SMALL TABLES WITH POWDER COATED FRAME AND GLASS TOP Ø 60 cm Codes: 2CV610-TBO 2CV67-TBO height 105,5 cm, base Ø 50 cm, top Ø 60 cm height 73,5 cm, base Ø 50 cm, top Ø 60 cm height 55 cm, base Ø 50 cm, top Ø 60 cm Descrizione: small tables with a steel base ø 500 mm, 5 mm thick, epoxy-powder coated and covered with stainless steel, with holes in the centre to fix the stand made of ø 50 mm mat white aluminium plate; a Ø 600 mm circular top in tempered ground transparent glass, to which 4 stainless steel plates are glued. The plates are fastened to the aluminum supporting frame by M6 screws. 105 cm 2CV610-TBO 73 cm 2CV610-TBO 2CV67-TBO 2CV67-TBO 5 Detail of transparent glass top Pag. 3/5
POWDER COATED FRAME FOR HPL OR GLASS TOP Ø 60 cm Codes: 2SC610-BO 2SC67-BO 2SC65-BO height 102,5 cm, base Ø 50 cm height 7, base Ø 50 cm height 48,5 cm, base Ø 50 cm Description: frame composed of a steel base ø 500 mm, 5 mm thick, epoxy-powder coated and covered with stainless steel, with holes in the centre to fix the stand made of ø 50 mm mat white epoxy-powder coated tubular steel; supporting frame for the top made in mat white powder-coated cast aluminium fastened to the upper section of the stand by M8 screws, hidden by a powder-coated aluminium plate. HPL top are directely fixed to the frame through screws (not included) Glass top fixing plates not included 2SC610-BO 2SC67-BO 2SC65-BO Frames for tables code 2CH610-BOB, 2CH67-BOB, 2CH65-BOB, 2CV610-TBO, 2CV67-TBO, Codici: 2SC810-BO 2SC87-BO 2SC85-BO height 103 cm, base Ø 50 cm height 7, base Ø 50 cm height 49 cm, base Ø 50 cm 103 cm 7 49 cm 102,5 cm 7 48,5 cm POWDER COATED FRAME FOR GLASS TOP Ø 60 cm OR HPL TOP Ø 60 OR 80 cm Description: frame composed of a steel base ø 500 mm, 10 mm thick, epoxy-powder coated and covered with stainless steel, with holes in the centre to fix the stand made of ø 50 mm mat white epoxy-powder coated tubular steel; supporting frame for the top made in mat white powder-coated cast aluminium fastened to the upper section of the stand by M8 screws, hidden by a powder-coated aluminium plate. HPL top are directely fixed to the frame through screws (not included) Glass top fixing plates not included 2SC810-BO 2SC87-BO 2SC85-BO Frames for tables code 2CH810-BOB, 2CH87-BOB, 2CH85-BOB, 2CH610-BOB, 2CH67-BOB, 2CH65-BOB, 2CV610-TBO, 2CV67-TBO, Pag. 4/5
GLASS TOP FIXING PLATES Code: 2FCV104-I ø 3,5 cm Descrizione: stainless steel plate to glue glass top to be fastened to the aluminium supporting frame of the top through M6 screws which is, in turn, to be fastened to the stand by M8 screws. 2FCV104-I Plates to be glued to glass tops Pag. 5/5