Part Ordering code Marking Remarks Package BFR90A BFR90AGELB-GS08 BFR90A Packed in Bulk TO-50(3)

Similar documents
BFR91. Silicon NPN Planar RF Transistor. Vishay Semiconductors

Part Ordering code Marking Remarks Package BFR91A BFR91AGELB-GS08 BFR91A Packed in Bulk TO-50(3)

Silicon NPN Planar RF Transistor

BFQ67 / BFQ67R / BFQ67W

RF-amplifier up to GHz range specially for wide band antenna amplifier.

Silicon NPN Planar RF Transistor

BFR93A/BFR93AR/BFR93AW. Silicon NPN Planar RF Transistor. Vishay Semiconductors. Applications. Features. Absolute Maximum Ratings

Parameter Test Conditions Symbol Value Unit Junction ambient on glass fibre printed board (40 x 25 x 1.5) mm 3 plated with 35m Cu

BFR 93 / BFR 93 R. Silicon NPN Planar RF Transistor. Applications. Features. Absolute Maximum Ratings. Maximum Thermal Resistance


Part Ordering code Marking Remarks BAV99-V BAV99-V-GS18 or BAV99-V-GS08 JE Tape and Reel

BPW17N. Silicon NPN Phototransistor. Vishay Semiconductors

Part Ordering code Type Marking Remarks BAT41 BAT41-TR or BAT41-TAP BAT41 Tape and Reel/Ammopack

Silicon NPN Planar RF Transistor

BPW41N. Silicon PIN Photodiode. Vishay Semiconductors

TEFT4300. Silicon NPN Phototransistor. Vishay Semiconductors

BPV11. Silicon NPN Phototransistor. Vishay Semiconductors

TEPT5600. Ambient Light Sensor. Vishay Semiconductors

S07B / 07D / 07G / 07J / 07M

BPV10NF. High Speed Silicon PIN Photodiode. Vishay Semiconductors

1N5221B to 1N5267B. Small Signal Zener Diodes. Vishay Semiconductors

TCMT11.. Series/ TCMT4100

Part Ordering code Marking Remarks BAW56-V BAW56-V-GS18 or BAW56-V-GS08 JD Tape and Reel

BPV23NF(L) Silicon PIN Photodiode. Vishay Semiconductors

Part Ordering code Type Marking Remarks BAS85 BAS85-GS18 or BAS85-GS08 - Tape and Reel

S186P. Silicon PIN Photodiode. Vishay Semiconductors

BAS19-V / 20-V / 21-V

Absolute Maximum Ratings T amb = 25 C, unless otherwise specified Parameter Test condition Part Symbol Value Unit

Part Ordering code Marking Remarks BAV99-V BAV99-V-GS18 or BAV99-V-GS08 JE Tape and Reel


Parameter Test condition Symbol Value Unit Junction ambient l = 4 mm, T L = constant R thja 300 K/W

Part Ordering code Type Marking Remarks BAT41 BAT41-TR or BAT41-TAP BAT41 Tape and Reel/Ammopack

Optocoupler, Phototransistor Output, with Base Connection

BAS81 / 82 / 83. Small Signal Schottky Diodes. Vishay Semiconductors. Features Integrated protection ring against static discharge

High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero


BPW46L. Silicon PIN Photodiode. Vishay Semiconductors

ZMY3V9 to ZMY100. Zener Diodes. Vishay Semiconductors

Silicon PIN Photodiode, RoHS Compliant, Released for Lead (Pb)-free Solder Process, AEC-Q101 Released

Part Ordering code Marking Remarks MMBT2222A MMBT2222A-GS18 or MMBT2222A-GS08 1P Tape and Reel

Part Type differentiation Ordering code Remarks 2N3904 2N3904-BULK or 2N3904-TAP Bulk / Ammopack

BPV11F. Silicon NPN Phototransistor VISHAY. Vishay Semiconductors

SD103AW-V/103BW-V/103CW-V

MCL103A / 103B / 103C

TLMO / S / Y1000. Low Current 0603 LED. Vishay Semiconductors

Parameter Test condition Symbol Value Unit Power dissipation T L 25 C P tot 500 mw Z-current I Z P tot /V Z ma

Reflective Optical Sensor with PIN Photodiode Output. Parameter Test condition Symbol Value Unit Reverse Voltage V R 5 V Forward current I F 100 ma

Optocoupler, Photodarlington Output, High Gain, With Base Connection

BPV22NF(L) Silicon PIN Photodiode. Vishay Semiconductors

BP104. Silicon PIN Photodiode. Vishay Semiconductors

TCLT10.. Series. Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package. Vishay Semiconductors

TLHE / G / K / P510. High Intensity LED, 5 mm Untinted Non-Diffused VISHAY. Vishay Semiconductors

TSHG6400. High Speed IR Emitting Diode in T-1¾ Package. Vishay Semiconductors

Part Ordering code Type Marking Remarks BAT85S BAT85S-TR or BAT85S-TAP BAT85S Tape and Reel/Ammopack

MMBZ4681-V to MMBZ4717-V

MMSZ4681-V to MMSZ4717-V

Optocoupler, Phototransistor Output, no Base Connection

BPW41N. Silicon PIN Photodiode. Vishay Semiconductors

Optocoupler, Photodarlington Output, AC Input, Internal R BE

Type Ordering Code Remarks

Optocoupler, Phototransistor Output, AC Input

BPW85. Silicon NPN Phototransistor. Description. Features. Applications. Absolute Maximum Ratings

High Power Infrared Emitting Diode, 950 nm, GaAlAs/GaAs

Linear Optocoupler, PCMCIA Package

TCET1100/ TCET1100G. Pb Pb-free. Optocoupler, Phototransistor Output, High Temperature. Vishay Semiconductors

Reflective Optical Sensor with PIN Photodiode Output

SD103A/103B/103C. Small Signal Schottky Diodes. Vishay Semiconductors

Optocoupler, Phototransistor Output, Low Input Current

Ambient Light Sensor, RoHS Compliant, Released for Lead (Pb)-free Solder Process, AEC-Q101 Released

Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS

IL388DAA. Linear Optocoupler, PCMCIA package. Vishay Semiconductors

BPW17N. Silicon NPN Phototransistor. Vishay Semiconductors. Description. Features. Applications Detector in electronic control and drive circuits

Transmissive Optical Sensor with Phototransistor Output

Optocoupler, Photodarlington Output, High Gain, with Base Connection

Low Current 7 mm 7-Segment Display

Diode capacitance V R = 0 V, f = 1 MHz, E = 0 C D 1.2 nf V R = 5 V, f = 1 MHz, E = 0 C D 400 pf Dark Resistance V R = 10 mv R D 38 GΩ Optical

TSOP39256CZ1. IR Receiver Modules for Remote Control Systems. Vishay Semiconductors

Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package

Low Current 10 mm 7-Segment Display

Standard SMD LED PLCC-2

Optocoupler, Phototransistor Output, AC Input, with Base Connection

Reflective Optical Sensor with Transistor Output

Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package

Parameter Test Conditions Symbol Value Unit Junction ambient l=4mm, T L =constant R thja 110 K/W

Linear Optocoupler, PCMCIA Package

Optocoupler, Phototransistor Output, Very High Isolation Voltage

Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package

Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package

Optocoupler, Phototransistor Output, Low Input Current, with Base Connection

TSOP591.. IR Receiver Modules for Remote Control Systems. Vishay Semiconductors

Clock Display FEATURES APPLICATIONS. (nm) I F I F

Reflective Optical Sensor with Transistor Output

High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero

TSOP48.. IR Receiver Modules for Remote Control Systems. Vishay Semiconductors

EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.

TV Vertical Deflection Output Amplifier

TDCG1050M, TDCG1060M, TDCR1050M, TDCR1060M Clock Display

Optocoupler, Photodarlington Output, Low Input Current, High Gain, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO

TSOP312.. IR Receiver Modules for Remote Control Systems. Vishay Semiconductors

Transcription:

Silicon NPN Planar RF Transistor Features High power gain Low noise figure High transition frequency Lead (Pb)-free component Component in accordance to RoHS 22/95/EC and WEEE 22/96/EC e3 3 2 1 2 E 3 1 B C Applications RF amplifier up to GHz range specially for wide band antenna amplifier. Electrostatic sensitive device. Observe precautions for handling. 1939 Mechanical Data Case: TO-5 Plastic case Weight: approx. 111 mg Pinning: 1 = Collector, 2 = Emitter, 3 = Base Parts Table Part Ordering code Marking Remarks Package GELB-GS8 Packed in Bulk TO-5(3) Absolute Maximum Ratings T amb = 25 C, unless otherwise specified Parameter Test condition Symbol Value Unit Collector-base voltage V CBO 2 V Collector-emitter voltage V CEO 15 V Emitter-base voltage V EBO 2 V Collector current I C 3 ma Total power dissipation T amb 6 C P tot 3 mw Junction temperature T j 15 C Storage temperature range T stg - 65 to + 15 C Maximum Thermal Resistance Parameter Test condition Symbol Value Unit Junction ambient 1) R thja 3 K/W 1) on glass fibre printed board (4 x 25 x 1.5) mm 3 plated with 35 μm Cu 1

Electrical DC Characteristics T amb = 25 C, unless otherwise specified Parameter Test condition Symbol Min Typ. Max Unit Collector-emitter cut-off current V CE = 2 V, V BE = I CES 1 μa Collector-base cut-off current V CB = 15 V, I E = I CBO 1 na Emitter-base cut-off current V EB = 2 V, I C = I EBO 1 μa Collector-emitter breakdown voltage I C = 1 ma, I B = V (BR)CEO 15 V DC forward current transfer ratio V CE = 1 V, I C = 14 ma h FE 5 1 15 Electrical AC Characteristics T amb = 25 C, unless otherwise specified Parameter Test condition Symbol Min Typ. Max Unit Transition frequency V CE = 1 V, I C = 14 ma, f T 6 GHz f = 5 MHz Collector-base capacitance V CB = 1 V, f = 1 MHz C cb.3 pf Collector-emitter capacitance V CE = 1 V, f = 1 MHz C ce.25 pf Emitter-base capacitance V EB =.5 V, f = 1 MHz C eb.9 pf Noise figure V CE = 1 V, I C = 2 ma, f = 8 MHz, Z S = 5 Ω F 1.8 db Power gain Linear output voltage - two tone intermodulation test Third order intercept point V CE = 1 V, I C = 14 ma, Z L = Z Lopt, f = 8 MHz V CE = 1 V, I C = 14 ma, d IM = 6 db, f 1 = 86 MHz, f 2 = 81 MHz, Z S = Z L = 5 Ω V CE = 1 V, I C = 14 ma, f = 8 MHz G pe 16 db V 1 = V 2 12 mv IP 3 24 dbm Common Emitter S-Parameters V CE /V I C /ma f/mhz S11 S21 S12 S22 LIN ANG LIN ANG LIN ANG LIN ANG deg deg deg deg 5 2 1.9-17.7 6.25 165.4.2 81.1.98-6.8 3.8-5.4 5.51 14.9.5 65.5.91-18.2 5.67-78.1 4.66 121.6.7 56.7.84-25.8 8.52-111.2 3.56 99.9.8 51.2.77-33.8 1.45-128.8 2.99 89..9 51..75-38.4 12.4-144.1 2.58 8.3.1 52.1.74-42.7 15.34-164.2 2.11 69.3.11 54.6.74 49.4 18.3 176.6 1.8 59.3.12 57.8.75-56.3 2.28 165.9 1.64 54.2.13 59.4.76-61. 5 5 1.77-27. 13.24 156.9.2 76.2.95-1.9 2

V CE /V I C /ma f/mhz S11 S21 S12 S22 LIN ANG LIN ANG LIN ANG LIN ANG deg deg deg deg 3.56-69.4 9.72 125..4 63.9.79-23.5 5.41-97.4 7.1 16.7.5 61.8.7-28.5 8.3-126.9 4.76 89.9.7 63.5.65 34.1 1.26-142.7 3.89 81.8.8 64.6.64-38.3 12.24-155.8 3.29 75.1.1 65.7.63-42.5 15.21-174.3 2.67 66.5.12 66.2.64-49.3 18.19 167.7 2.27 58.1.14 66..66-56.2 2.18 158.7 2.6 53.8.16 65.5.67-6.6 5 1 1.61-33.8 2.89 147.5.2 74.8.89-15. 3.36-85.3 12.25 113.4.3 67.7.68-24.6 5.26-111.7 8.1 98.2.5 69.4.61-27.5 8.2-139.9 5.28 84.9.7 71.4.58-32.8 1.18-154.3 4.28 78..8 71.8.58-37. 12.17-166.5 3.61 72.3.1 71.6.58-41.5 15.16 177.7 2.91 64.7.12 7.3.59-48.7 18.14 16.4 2.48 57.1.15 68.7.61-55.7 2.14 153.6 2.26 53.1.17 67.5.62-6.4 5 14 1.51-44.8 24.51 142.5.1 74.5.86-16.7 3.28-93.9 13.1 18.9.3 71..65-24.1 5.2-12.2 8.36 95.3.5 72.9.59-26.2 8.17-147.3 5.4 83..7 74..57-31.8 1.15-16.1 4.36 76.6.8 74..57-36.2 12.15-172.1 3.69 71.3.1 73.4.57-4.7 15.14 172.8 2.98 63.9.13 71.7.58-48. 18.13 155.7 2.52 56.5.15 69.8.6-55.1 2.13 147.1 2.29 52.8.17 68.3.61-59.8 5 2 1.41-53.2 27.71 137.2.1 74..82-18. 3.22-15.4 13.38 14.9.3 74.1.62-22.9 5.17-131.2 8.45 92.6.4 75.6.58-24.8 8.15-156.4 5.41 81.3.7 76.1.56-3.7 1.14 17.4 4.36 75.2.9 75.4.56-35.3 12.14 177.4 3.68 69.8.1 74.5.57-4. 15.14 164.4 2.96 62.5.13 72.5.58-47.3 18.14 147.5 2.51 55.4.15 7.4.59-54.5 2.13 141. 2.28 51.5.17 68.8.6-59.3 5 3 1.3-67.7 29.72 131.4.1 74.3.78-18.4 3.19-125.3 13.17 11.2.3 76.3.61-2.7 5.16-149.8 8.19 9..4 78..58-22.8 8.16-171.3 5.23 79.2.7 77.8.57-29. 1.16 177.6 4.21 73.3.8 77.1.57-33.9 12.16 167.5 3.54 68.2.1 76..58-38.6 15.16 156.2 2.85 6.9.13 73.9.59-46.1 18.16 139.1 2.41 53.8.15 71.7.61-53.5 2.16 133.3 2.19 49.9.17 7..62-58.3 1 2 1.92-16.7 6.23 166..1 8.6.98-5.7 3

V CE /V I C /ma f/mhz S11 S21 S12 S22 LIN ANG LIN ANG LIN ANG LIN ANG deg deg deg deg 3.87-47.6 5.55 142.1.3 67.1.93-15.5 5.69-74. 4.75 123.3.5 58.8.87-22.2 8.53-16. 3.67 11.9.6 54.1.82-29.5 1.45-122.8 3.1 9.9.7 54.4.8-33.9 12.39-138. 2.67 82.3.8 56..79-38. 15.33-158.2 2.19 71.2.9 59.8.8-44.3 18.29-177.6 1.87 61.2.1 63.6.81-5.8 2.27 172.2 1.7 56.1.11 65.5.83-55.3 1 5 1.8-24.7 13.17 158..1 77.5.96-8.8 3.58-63.9 9.89 126.8.3 65.7.83 19.3 5.43-89.9 7.21 18.5.4 63.5.76-23.7 8.3-117.6 4.94 91.6.6 65.9.72-29.2 1.26-132.1 4.4 83.4.7 67.5.71-33.2 12.22-145.9 3.42 76.8.8 69.1.71-37.2 15.19-163. 2.77 68..1 7.2.72-43.6 18.17 177.9 2.36 59.8.12 7.7.79-5.3 2.15 168.8 2.15 55.6.13 7.4.75-54.7 1 1 1.65-34.2 2.73 149.1.1 74.8.92-11.8 3.39-77. 12.6 115.1.3 68.7.75-19.8 5.27-99.8 8.38 99.9.4 7.7.69-22.6 8.19-124.7 5.5 86.3.6 73.2.67 27.8 1.17-138.1 4.45 79.4.7 74.3.67-31.9 12.15-151.4 3.76 74..8 74.2.67-36.2 15.13-167.7 3.4 66.4.11 74.1.68-42.7 18.18 174.5 2.58 58.8.13 73.1.7-49.5 2.11 165.6 2.35 54.8.14 72.3.72-53.9 1 14 1.56-39.9 24.49 144.2.1 74.3.89-13.1 3.31-83.1 13.4 11.5.3 71.4.72-19.3 5.21-14.9 8.66 96.8.4 74.1.67-21.6 8.16-129.3 5.62 84.4.6 76..66-26.9 1.14-142.2 4.55 78..7 76.3.66-31. 12.13-155.9 3.83 72.7.8 76.1.66-35.5 15.12-17.8 3.1 65.4.1 75.3.68-42.2 18.11 169.7 2.63 58.1.13 74..7-49.1 2.11 162.3 2.39 54.3.14 73..71-53.5 4

Typical Characteristics (Tamb = 25 C unless otherwise specified) P tot - Total Power Dissipation ( mw ) 12845 4 35 3 25 2 15 1 5 2 4 6 8 1 12 14 16 T amb - Ambient Temperature ( C ) Figure 1. Total Power Dissipation vs. Ambient Temperature F - Noise Figure ( db ) 12891 3.5 3. 2.5 2. 1.5 1..5 V CE =1V f = 8 MHz Z S =5 5 1 15 2 25 3 I C - Collector Current ( ma ) Figure 4. Noise Figure vs. Collector Current f - Transition Frequency ( MHz ) T 12889 6 5 4 3 2 1 V CE = 1V f = 5 MHz 5 1 15 2 25 3 I C - Collector Current ( ma ) Figure 2. Transition Frequency vs. Collector Current C cb - Collector Base Capacitance ( pf ) 1289 1..8.6.4.2 f=1mhz 4 8 12 16 2 V CB - Collector Base Voltage ( V ) Figure 3. Collector Base Capacitance vs. Collector Base Voltage 5

V CE = 1 V, I C = 1 ma, Z = 5 Ω S 11 S 12 j.2 j.5 j j2 j5.1 15 12.3 9.8 6 3 2. GHz.2.5 1 2 5 1. 18 2. GHz 8 16 -j.2.3.1 -j5-15 -3 -j.5 -j2 13 51 -j Figure 5. Input Reflection Coefficient 13 512-12 -6-9 Figure 7. Reverse Transmission Coefficient S 21 S 22.1 15 12 9.3 6 3 j.2 j.5 j j2 j5.8 18 2. GHz 8 16.2.5 1 2 5.5.1-15 -3 -j.2 1. 2. GHz -j5 13 512-12 -6-9 Figure 6. Forward Transmission Coefficient 13 513 -j.5 -j2 -j Figure 8. Output Reflection Coefficient 6

Package Dimensions in mm 96 12244 7

Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (199) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 199 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/54/EEC and 91/69/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use products for any unintended or unauthorized application, the buyer shall indemnify against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-7425 Heilbronn, Germany 8

Notice Legal Disclaimer Notice Vishay Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91 Revision: 8-Apr-5 1