Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS
|
|
- Marcus Preston
- 6 years ago
- Views:
Transcription
1 i17906 Optocoupler, Phototransistor Output, DESCRIPTION The SFH610A (DIP) and SFH6106 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 or SMD package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.4 mm spacing. Creepage and clearance distances of > 8.0 mm are achieved with option 6. This version complies with IEC 6090 (DIN VDE 080) for reinforced insulation up to an operation voltage of 400 V RMS or DC. Specifications subject to change. A C A C SFH610A 4 3 E C SFH E 3 C SFH610A, SFH6106 FEATURES Good CTR linearity depending on forward current Isolation test voltage, 300 V RMS High collector emitter voltage, V CEO = 70 V Low saturation voltage Fast switching times Low CTR degradation Temperature stable Low coupling capacitance End stackable, 0.100" (2.4 mm) spacing High common mode interference immunity Lead (Pb)-free component Component in accordance to RoHS 2002/9/EC and WEEE 2002/96/EC AGENCY APPROVALS UL177, file no. E2744 system code H or J, double protection DIN EN (VDE 0884) available with option 1 CSA 9371 BSI IEC 6090; IEC 6006 ORDER INFORMATION PART SFH610A- SFH6106-T X006 X018T X006 X006 X007 X006 Note For additional information on the available options refer to option information. REMARKS CTR 40 % to 80 %, DIP-4 CTR 63 % to 12 %, DIP-4 CTR 100 % to 200 %, DIP-4 CTR 160 % to 320 %, DIP-4 CTR 20 % to 00 %, DIP-4 CTR 40 % to 80 %, SMD-4 CTR 63 % to 12 %, SMD-4 CTR 100 % to 200 %, SMD-4 CTR 160 % to 320 %, SMD-4 CTR 20 % to 00 %, SMD-4, tape and reel CTR 40 % to 80 %, DIP mil CTR 40 % to 80 %, SMD mil, wide leadspread CTR 63 % to 12 %, DIP mil CTR 100 % to 200 %, DIP mil CTR 100 % to 200 %, SMD-4 CTR 160 % to 320 %, DIP mil Document Number: For technical questions, contact: optocoupler.answers@vishay.com Rev. 2.0, 10-Dec
2 SFH610A, SFH6106 Optocoupler, Phototransistor Output, ABSOLUTE MAXIMUM RATINGS (1) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage V R 6 V DC forward current 60 ma Surge forward current t 10 µs SM 2. A Power dissipation P diss 100 mw OUTPUT Collector emitter voltage V CE 70 V Emitter collector voltage V EC 7 V Collector current I C 0 ma t p 1.0 ms I C 100 ma Power dissipation P diss 10 mw COUPLER Isolation test voltage between emitter and detector V ISO 300 V RMS Creepage distance 7 mm Clearance distance 7 mm Insulation thickness between emitter and detector 0.4 mm Comparative tracking index per DIN IEC112/VDE 0303 part 1 17 Isolation resistance V IO = 00 V, T amb = 2 C R IO Ω V IO = 00 V, T amb = 100 C R IO Ω Storage temperature range T stg - to + 10 C Ambient temperature range T amb - to C Soldering temperature (2) max. 10 s, dip soldering distance to seating plane 1. mm T sld 260 C Notes (1) T amb = 2 C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage = 60 ma V F V Reverse current V R = 6 V I R µa Capacitance V R = 0 V, f = 1 MHz C O 13 pf Thermal resistance R thja 70 K/W OUTPUT Collector emitter capacitance V CE = V, f = 1 MHz C CE.2 pf Thermal resistance R thja 00 K/W I CEO 2 0 na I CEO 2 0 na I CEO 2 0 na I CEO 2 0 na Collector emitter leakage current V CE = 10 V I CEO 100 na I CEO 100 na I CEO 100 na I CEO 100 na SFH610A- I CEO 100 na SFH6106-T I CEO 100 na For technical questions, contact: optocoupler.answers@vishay.com Document Number: Rev. 2.0, 10-Dec-08
3 Optocoupler, Phototransistor Output, SFH610A, SFH6106 ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT COUPLER Collector emitter saturation voltage = 10 ma, I C = 2. ma V CEsat V Coupling capacitance f = 1 MHz C C 0.4 pf Note T amb = 2 C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT CTR % CTR % CTR % CTR % = 10 ma, V CE =.0 V CTR % CTR % CTR % CTR % I C / SFH610A- CTR % SFH6106-T CTR % CTR % CTR % CTR 22 4 % = 1 ma, V CE = V CTR 22 4 % CTR % CTR % CTR 6 90 % CTR 6 90 % SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT NON-SATURATED Current V CC = V, R L = 7 Ω 10 ma Rise time V CC = V, R L = 7 Ω t r 2 µs Fall time V CC = V, R L = 7 Ω t f 2 µs Turn-on time V CC = V, R L = 7 Ω t on 3 µs Turn-off time V CC = V, R L = 7 Ω t off 2.3 µs Cut-off frequency V CC = V F CO 20 khz SATURATED 20 ma Current 10 ma 10 ma ma Document Number: For technical questions, contact: optocoupler.answers@vishay.com Rev. 2.0, 10-Dec
4 SFH610A, SFH6106 Optocoupler, Phototransistor Output, SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. UNIT SATURATED Rise time Fall time Turn-on time Turn-off time Note All values presented are typical values. t r 2 µs t r 3 µs t r 3 µs t r 4 µs t f 11 µs t f 14 µs t f 14 µs t f 1 µs t on 3 µs t on 4.2 µs t on 4.2 µs t on 6 µs t off 18 µs t off 23 µs t off 23 µs t off 2 µs For technical questions, contact: optocoupler.answers@vishay.com Document Number: Rev. 2.0, 10-Dec-08
5 Optocoupler, Phototransistor Output, SFH610A, SFH6106 SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Climatic classification (according to IEC 68 part 1) /100/21 Comparative tracking index CTI V IOTM V V IORM 890 V P SO 400 mw I SI 27 ma T SI 17 C Creepage distance standard DIP-4 7 mm Clearance distance standard DIP-4 7 mm Creepage distance 400 mil DIP-4 8 mm Clearance distance 400 mil DIP-4 8 mm Insulation thickness, reinforced rated per IEC mm Note As per IEC , , this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS T amb = 2 C, unless otherwise specified R = 7 Ω L V CC =V 1.0 k Ω V CC =V I C 47 Ω 47 Ω isfh610a_01 isfh610a_02 Fig. 1 - Linear Operation (without Saturation) Fig. 3 - Switching Operation (with Saturation) I C % = 10 ma, V CC =.0 V I c 30 ma = 14 ma = 12 ma = 10 ma = 8 ma = 6 ma = 4 ma = 1 ma = 2 ma T A ( C) isfh610a_03 Fig. 2 - Current Transfer Ratio (CTR) vs. Temperature V 1 V CE isfh610a_04 Fig. 4 - Output Characteristics (Typ.) Collector Current vs. Collector Emitter Voltage Document Number: For technical questions, contact: optocoupler.answers@vishay.com Rev. 2.0, 10-Dec
6 SFH610A, SFH6106 Optocoupler, Phototransistor Output, V F 1.2 V 1.1 V F = f ( ) 2 C 0 C 7 C 120 ma 90 P tot = f (T A ) ma 10 2 isfh610a_0 Fig. - Diode Forward Voltage vs. Forward Current C 100 T A isfh610a_08 Fig. 8 - Permissible Power Dissipation vs. Temperature 20 pf f = 1.0 MHz 200 P tot mw 1 C 10 Transistor Diode C CE V 10 2 V e isfh610a_06 Fig. 6 - Transistor Capacitance (Typ.) vs. Collector Emitter Voltage C 100 T A isfh610a_09 Fig. 9 - Permissible Diode Forward Current vs. Ambient Temperature 10 4 ma D = D = t p T t p 0.02 Pulse cycle D = parameter T I F DC s 10 1 t p isfh610a_07 Fig. 7 - Permissible Pulse Handling Capability Forward Current vs. Pulse Width For technical questions, contact: optocoupler.answers@vishay.com Document Number: Rev. 2.0, 10-Dec-08
7 Optocoupler, Phototransistor Output, SFH610A, SFH6106 PACKAGE DIMENSIONS in inches (millimeters) (6.81) 0.2 (6.48) Pin 1 identification (4.83) (4.) (7.92) (7.2) IS OM ethod A 0.04 (1.14) (0.76) (0.84) (0.74) 10 i typ (1.32) (1.22) 0.10 (3.81) (3.30) 0.03 (0.89) (0.1) 0.10 (2.67) 0.09 (2.41) 3 to (0.30) (0.20) 0.20 (6.3) (.84) (3.30) (2.79) SMD (6.81) 0.2 (6.48) (4.83) (4.) PIN 1 IDENTIFICATION (2.4) R (0.2) (0.76) (1.78) 0.04 (1.14) (0.76) 0.31 (8.00) min (1.2) 0.43 (11.0) (0.84) (0.74) 0.39 (10.03) 0.37 (9.2) (7.92) (7.2) (3.81) (3.30) ISO methoda i typ (1.32) (1.22) (0.249) (0.102) 0.10 (2.67) 0.09 (2.41) Lead coplanarity (0.102) max. ( K ) (0.30) (0.20) Document Number: For technical questions, contact: optocoupler.answers@vishay.com Rev. 2.0, 10-Dec
8 SFH610A, SFH6106 Optocoupler, Phototransistor Output, Option (10.36) (9.96) (7.8) (7.4) Option (7.62) typ. Option (7.62) typ (0.7) (4.6) (4.1) (0.0) (0.00) 0.10 (3.81) (3.30) (0.3) (0.2) (10.16) (10.92) 0.31 (8.0) min (8.4) min (10.3) max (9.27) min (12.00) max For technical questions, contact: optocoupler.answers@vishay.com Document Number: Rev. 2.0, 10-Dec-08
9 Optocoupler, Phototransistor Output, SFH610A, SFH6106 OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/40/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use products for any unintended or unauthorized application, the buyer shall indemnify against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 33, D-7402 Heilbronn, Germany Document Number: For technical questions, contact: optocoupler.answers@vishay.com Rev. 2.0, 10-Dec-08 61
10 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: Revision: 18-Jul-08 1
Optocoupler, Phototransistor Output, Low Input Current
Optocoupler, Phototransistor Output, SFH68A/SFH686 FEATURES Good CTR linearity depending on forward current Low CTR degradation High collector emitter voltage, V CEO = 55 V i796 DESCRIPTION A C 2 The SFH68A
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS, 110 C Rated
SFH67A Optocoupler, Phototransistor Output, FEATURES Operating temperature from - 55 C to + 0 C Good CTR linearity depending on forward current A C 2 DESCRIPTION 4 C 3 E 7907 The 0 C rated SFH67A (DIP)
More informationOptocoupler, Phototransistor Output, no Base Connection
CNY7F Optocoupler, Phototransistor FEATURES 86 DESCRIPTION The CNY7F is an optocoupler consisting of a gallium arsenide infrared emitting diode optically coupled to a silicon planar phototransistor detector
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS
Vishay Semiconductors Optocoupler, Phototransistor Output, FEATURES Excellent CTR linearity depending on forward current 17448 DESCRIPTION 1 A 1 C 2 The SFH615A (DIP) and SFH6156 (SMD) feature a variety
More informationOptocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package
Optocoupler, Phototransistor Output, FEATURES SMD low profile 5 pin package TCLT..Series Isolation test voltage 5 V RMS CTR flexibility available see order information 7296 5 4 3 2 C V D E Special construction
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS FEATURES Good CTR linearity depending on forward current Isolation test voltage, 53 V RMS High collector emitter voltage, V CEO = 7 V Low
More informationOptocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington A1 C 2 A3 C4 8 C 7E 6C 5E FEATURES High current transfer ratio at = 1 ma, 500 % minimum Isolation test voltage, 4000 V RMS Lead (Pb)-free component Component in accordance
More informationOptocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package
Optocoupler, Phototransistor Output, TCLT..Series A C 4 E 3 2 C DESCRIPTION C 7295 V D E The TCLT.. series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode
More informationOptocoupler, Photodarlington Output, AC Input, Internal R BE
Vishay Semiconductors Optocoupler, Photodarlington Output, AC FEATURES Internal R BE for better stability A/C 1 6 NC BV CEO < 60 V i179040 DESCRIPTION C/A 2 NC 3 The IL766B is a bidirectional input, optically
More informationOptocoupler, Phototransistor Output, Very High Isolation Voltage
CNY64, CNY65, CNY66 Optocoupler, Phototransistor Output, 64 Top View A C 65 66 FEATURES Rated recurring peak voltage (repetitive) V IORM = V RMS Thickness through insulation 3 mm 4 Creepage current resistance
More informationOptocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package
Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon
More informationOptocoupler, Phototransistor Output, AC Input
K84P, K824P, K844P Optocoupler, Phototransistor FEATURES Endstackable to 2.54 mm (.") spacing 722_2 C E A C 4pin DESCRIPTION 8 pin The K84P, K824P, K844P consist of a phototransistor optically coupled
More informationOptocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
More informationOptocoupler, Phototransistor Output, with Base Connection
FEATURES Isolation test voltage 5 V RMS A C 6 5 B C Long term stability Industry standard dual-in-line package Lead (Pb-free component NC E Component in accordance to RoHS /95/EC and WEEE /96/EC i79 AGENCY
More informationOptocoupler, Photodarlington Output, High Gain, with Base Connection
Optocoupler, Photodarlington Output, 4N32/4N33 FEATURES A 6 B Very high current transfer ratio, 500 % min. High isolation resistance, 0 Ω typical C NC 2 3 5 4 C E Standard plastic DIP package Lead (Pb)-free
More informationOptocoupler, Phototransistor Output, Low Input Current, with Base Connection
IL25AT/26AT/27AT Vishay Semiconductors Optocoupler, Phototransistor Output, i792 DESCRIPTION A K 2 NC 3 NC 4 8 NC 7 B 6 C 5 E The IL25AT/IL26AT/IL27AT are optically coupled pairs with a Gallium Arsenide
More informationOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
A1 C2 A3 C4 8 C 7E 6C 5E FEATURES Two channel coupler SOIC-8 surface mountable package Standard lead spacing of 0.05" Available only on tape and reel option (conforms to EIA standard 481-2) i179018 DESCRIPTION
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS
SFH61AA, SFH61AGB, SFH61AGR, SFH61ABM, SFH61ABL, SFH61AY, SFH61AB Optocoupler, Phototransistor Output, High Reliability, 3 V RMS FEATURES Low CTR degradation A 1 4 C Good CTR linearity depending on forward
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS
SFH61AA, SFH61AGB, SFH61AGR, SFH61AY Optocoupler, Phototransistor Output, High Reliability, 3 V RMS FEATURES Low CTR degradation A 1 4 C Good CTR linearity depending on forward current i1796 DESCRIPTION
More informationOptocoupler, Phototransistor Output, AC Input, with Base Connection
i79025 DESCRIPTION The is an AC input phototransistor optocoupler. The device consists of two infrared emitters connected in reverse parallel and coupled to a silicon NPN phototransistor detector. These
More informationOptocoupler, Photodarlington Output, Low Input Current, High Gain, with Base Connection
IL22AT/222AT/223AT Optocoupler, Photodarlington Output, FEATURES i79022 DESCRIPTION The IL22AT/IL222AT/IL223AT is a high current transfer ratio (CTR) optocoupler with a gallium arsenide infrared LED emitter
More informationOptocoupler, Phototransistor Output, with Base Connection
SFH6 Optocoupler, Phototransistor Output, with Base Connection FEATURES i79- DESCRIPTION The SFH6 is an optocoupler with a gallium arsenide LED emitter which is optically coupled with a silicon planar
More informationOptocoupler, Phototransistor Output, Low Input Current
Optocoupler, Phototransistor Output, Low Input Current A C 2 4 3 C E FEATURES Good CTR linearity depending on forward current Low CTR degradation High collector emitter voltage, V CEO = 55 V Isolation
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS
Optocoupler, Phototransistor Output, High Reliability, 5300 V RMS 17448-5 1 DESCRIPTION The features a variety of transfer ratios, low coupling capacitance and high isolation voltage. This coupler has
More informationTCLT10.. Series. Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package. Vishay Semiconductors
TCLT.. Series Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package Features SMD Low profile 4 lead package High Isolation 5 V RMS CTR flexibility available see order information e3 Special
More informationLinear Optocoupler, PCMCIA Package
Linear Optocoupler, PCMCIA Package i179085 DESCRIPTION The family of linear optocoupler consist of an IRLED optically coupled to two photodiodes. The emitter is located such that both photodiodes receive
More informationTCMT11.. Series/ TCMT4100
TCMT.. Series/ TCMT4 Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package Features Low profile package (half pitch) AC Isolation test voltage 375 V RMS Low coupling capacitance
More informationDual Photovoltaic MOSFET Driver Solid State Relay
Vishay Semiconductors Dual Photovoltaic MOSFET Driver Solid i1792_1 DIP SMD DESCRIPTION 8 7 6 5 1 2 3 4 Control 1 + Control 1 Control 2 + Control 2 Output 1 +Output 1 Output 2 +Output 2 The VO1263AB/AAC
More informationTCET1100/ TCET1100G. Pb Pb-free. Optocoupler, Phototransistor Output, High Temperature. Vishay Semiconductors
Optocoupler, Phototransistor Output, High Temperature Features Extra low coupling capacity - typical.2 pf High Common Mode Rejection Low temperature coefficient of CTR CTR offered in 9 groups Reinforced
More informationOptocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO
SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications
More informationOptocoupler, Photodarlington Output, High Gain, 300 V BV CEO
Optocoupler, Photodarlington Output, High Gain, 300 V BO i79060 DESCRIPTION i79062-3 The is optically coupled isolators with a gallium arsenide infrared LED and a silicon photodarlington sensor. Switching
More informationOptocoupler, Photodarlington Output
Optocoupler, Photodarlington Output C E FEATURES High isolation test voltage 5300 V RMS Standard plastic DIP-4 package Material categorization: for definitions of compliance please see www.vishay.com/doc?99912
More informationOptocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package
TCMT Series, TCMT4 Series Vishay Semiconductors Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch FEATURES Low profile package (half pitch) AC isolation test voltage 375 V RMS Low coupling
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS, 110 C Rated
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, 11 C Rated 17918-2 DESCRIPTION The 11 C rated (DIP) feature a high current transfer ratio, low coupling capacitance and high isolation voltage.
More informationOptocoupler, Phototransistor Output, SSOP-4, Half Pitch, Mini-Flat Package
Optocoupler, Phototransistor Output, SSOP-4, Half Pitch, Mini-Flat Package 22628- DESCRIPTION The series has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS A C 1 2 4 3 C E FEATURES Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation test voltage,
More informationBRT11/ 12/ 13. Optocoupler, Phototriac Output. Vishay Semiconductors
Optocoupler, Phototriac Output Features I TRMS = 300 ma High Static dv crq /dt < 10,000 V/µs Electrically Insulated between Input e3 and output circuit Microcomputer compatible - Very Low Trigger Current
More informationOptocoupler, Phototransistor Output, with Base Connection
Vishay Semiconductors Optocoupler, Phototransistor Output, FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability Industry standard dual-in-line package C 5 C Compliant to RoHS directive /95/EC
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS FEATURES Excellent CTR linearity depending on forward current Isolation test voltage, 53 V RMS A 1 4 C Fast switching times C 2 3 E Low CTR
More informationOptocoupler, Photodarlington Output, High Gain, with Base Connection
i79005 DESCRIPTION i79005_ The 4N32 and 4N33 are optically coupled isolators with a gallium arsenide infrared LED and a solicon photodarlington sensor. Switching can be achieved while maintaining a high
More informationPart Ordering code Type Marking Remarks BAT41 BAT41-TR or BAT41-TAP BAT41 Tape and Reel/Ammopack
Small Signal Schottky Diode Features For general purpose applications This diode features low turn-on voltage and high breakdown voltage. This device e2 is protected by a PN junction guard ring against
More informationIL388DAA. Linear Optocoupler, PCMCIA package. Vishay Semiconductors
Linear Optocoupler, PCMCIA package Features 2.3 mm High SMD package High sensitivity (K1) at low operating LED current Couples AC and DC signals Low input-output capacitance Isolation test voltage, 2130
More informationOptocoupler, Phototransistor Output, AC Input, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package
Optocoupler, Phototransistor Output, AC Input, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package 22628- DESCRIPTION The series has a GaAs infrared emitting diode emitter, which is optically coupled
More informationOptocoupler, Phototransistor Output, High Reliability, 5300 V RMS, Low Input Current
Optocoupler, Phototransistor Output, High Reliability, 53 V RMS, Low Input Current FEATURES A C 1 2 4 3 C E Operating temperature from -55 C to +11 C Good CTR linearity depending on forward current Isolation
More informationPart Ordering code Marking Remarks BAV99-V BAV99-V-GS18 or BAV99-V-GS08 JE Tape and Reel
Small Signal Switching Diode, Dual Features Fast switching speed High conductance Surface mount package ideally suited for automatic insertion Connected in series Lead (Pb)-free component Component in
More informationTCLT10.. Series. Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package VISHAY. Vishay Semiconductors
TCLT.. Series Optocoupler, Phototransistor Output, SOP-4L, Long Mini-Flat Package Features SMD Low profile 4 lead package High Isolation 5 V RMS CTR flexibility available see order information Special
More informationTEPT5600. Ambient Light Sensor. Vishay Semiconductors
Ambient Light Sensor Description TEPT56 is a silicon NPN epitaxial planar photo transistor in a standard T-1 3/4" plastic package. Peak of responsivity is in the visible spectrum. Infrared spectrum is
More informationOptocoupler Phototransistor Output, SOP-4, Mini-Flat Package, 110 C Rated
SFH69AT, SFH69BT, SFH69CT, SFH69ABT Optocoupler Phototransistor Output, SOP-4, Mini-Flat Package, C Rated FEATURES Operating temperature from - 55 C to + C A 4 C SOP (small outline package) Isolation test
More informationLow Input Current, Phototransistor Output, SOP-4, Mini-Flat Package
VOM68A Low Input Current, Phototransistor Output, SOP-4, Mini-Flat Package FEATURES Operating temperature from - 55 C to + C A 4 C SOP-4 mini-flat package CTR range 4 % to 6 %, I F = ma C 2 3 E Isolation
More informationOptocoupler, Phototransistor Output, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package
Optocoupler, Phototransistor Output, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package 22628- DESCRIPTION The series has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon
More informationS186P. Silicon PIN Photodiode. Vishay Semiconductors
S86P Silicon PIN Photodiode Description S86P is a high speed and high sensitive PIN photodiode in a flat side view plastic package. The epoxy package itself is an IR filter, spectrally matched to GaAs
More informationBPV11. Silicon NPN Phototransistor. Vishay Semiconductors
Silicon NPN Phototransistor Description is a very high sensitive silicon NPN epitaxial planar phototransistor in a standard T-1¾ plastic package. Due to its waterclear epoxy lens the device is sensitive
More informationLinear Optocoupler, PCMCIA Package
Linear Optocoupler, PCMCIA Package i179085 DESCRIPTION The family of linear optocoupler consist of an IRLED optically coupled to two photodiodes. The emitter is located such that both photodiodes receive
More informationPart Ordering code Type Marking Remarks BAS85 BAS85-GS18 or BAS85-GS08 - Tape and Reel
Small Signal Schottky Diode Features For general purpose applications This diode features low turn-on voltage e2 The devices are protected by a PN junction guard ring against excessive voltage, such as
More informationPart Ordering code Marking Remarks BAW56-V BAW56-V-GS18 or BAW56-V-GS08 JD Tape and Reel
Small Signal Switching Diode, Dual Features Silicon Epitaxial Planar Diode Fast switching dual diode with common e anode This diode is also available in other configurations including: a single with type
More informationOptocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection FEATURES A 1 6 B Isolation test voltage: 5 V RMS Long term stability C 2 5 C Industry standard dual-in-line package NC 3 4 E Material categorization:
More informationCNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC. Optocoupler, Phototransistor Output, with Base Connection
Vishay Semiconductors Optocoupler, Phototransistor Output, 17201_4 DESCRIPTION C E 5 4 The CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC consists of a phototransistor optically coupled to a gallium
More informationOptocoupler, Phototransistor Output, with Base Connection
Alternative Device Available, Use CNY7 www.vishay.com CNY7., CNY7G Optocoupler, Phototransistor Output, with Base Connection FEATURES 7_ DESCRIPTION i79- The CNY7 is an optically coupled pair consisting
More informationMCL103A / 103B / 103C
Small Signal Schottky Diodes Features Integrated protection ring against static discharge Low capacitance Low leakage current Low forward voltage drop Lead (Pb)-free component Component in accordance to
More informationOptocoupler, Phototransistor Output, High Temperature
TCET, TCETG Optocoupler, Phototransistor Output, 797_4 DESCRIPTION The TCET. consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 4-lead plastic dual inline
More informationOptocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package
TCMT Series, TCMT4 Series Optocoupler, Phototransistor Output, Single/Quad Channel, Half Pitch Mini-Flat Package FEATURES Low profile package (half pitch) AC isolation test voltage 375 V RMS Low coupling
More informationOptocoupler, Photodarlington Output (Single, Dual, Quad Channel)
Single hannel FEATURES A 6 B 25 ma load current rating Fast rise time, 0 µs 2 5 Fast fall time, 35 µs N 3 4 E Single, dual and quad channel Dual hannel A A 2 3 4 8 7 6 5 E E Solid state reliability Standard
More informationTransmissive Optical Sensor with Phototransistor Output
Transmissive Optical Sensor with Phototransistor Output Description These devices have a compact construction where the emitting-light sources and the detectors are located face-to-face on the same optical
More informationBAS81 / 82 / 83. Small Signal Schottky Diodes. Vishay Semiconductors. Features Integrated protection ring against static discharge
Small Signal Schottky Diodes Features Integrated protection ring against static discharge e2 Low capacitance Low leakage current Low forward voltage drop Very low switching time Lead (Pb)-free component
More informationSilicon NPN Planar RF Transistor
Not for new design, this product will be obsoleted soon BFQ81 Silicon NPN Planar RF Transistor Features Small feedback capacitance Low noise figure Low cross modulation Lead (Pb)-free component e3 2 1
More informationOptocoupler, Phototransistor Output
Vishay Semiconductors Optocoupler, Phototransistor Output FEATURES DC isolation test voltage 5 V RMS Compliant to RoHS directive 22/95/EC and in accordance to WEEE 22/96/EC APPLICATIONS Programmable logic
More informationOptocoupler, Photodarlington Output, High Gain, With Base Connection
Optocoupler, Photodarlington Output, High Gain, With Base Connection Features Very high current transfer ratio, 500 % Min. High isolation resistance, 0 Ω Typical Standard plastic DIP package Lead-free
More informationOptocoupler, Phototransistor Output, AC Input, Single/Quad Channel, Half Pitch Mini-Flat Package
TCMT6, TCMT46 Series Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, Single/Quad Channel, Half FEATURES Low profile package (half pitch) AC isolation test voltage 375 V RMS Low coupling
More informationCNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC. Optocoupler, Phototransistor Output, with Base Connection
Vishay Semiconductors Optocoupler, Phototransistor Output, 17201_4 DESCRIPTION C E 5 4 The CNY75A, CNY75B, CNY75C, CNY75GA, CNY75GB, CNY75GC consists of a phototransistor optically coupled to a gallium
More informationEN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. High Speed Optocoupler, Mbd, kv/ms CMR, Transistor Output Features Direct
More informationOptocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
More informationOptocoupler, Phototransistor Output, Very High Isolation Voltage
Vishay Semiconductors Optocoupler, Phototransistor Output, 787-4 DESCRIPTION CNY64 CNY65 CNY66 Top View A C The CNY64, CNY65, and CNY66 consist of a phototransistor optically coupled to a gallium arsenide
More informationOptocoupler, Phototransistor Output
72_4 DESCRIPTION 8537_4 C E 5 4 The series consists of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package. VDE STANDARDS These couplers
More informationOptocoupler, Phototransistor Output, High Temperature
Optocoupler, Phototransistor Output, High Temperature 1791823 DESCRIPTION The consists of a phototransistor optically coupled to a gallium arsenide infraredemitting diode in a 4 pin plastic dual inline
More informationOptocoupler, Phototriac Output, Zero Crossing, High dv/dt, Low Input Current
Optocoupler, Phototriac Output, VO4157, VO4158 i179030 A C NC 1 2 3 ZCC* 6 5 4 MT2 NC MT1 *Zero crossing circuit FEATURES High static dv/dt 5 kv/µs High input sensitivity I FT = 1.6, 2, and 3 ma 300 ma
More informationOptocoupler, Phototransistor Output, High Temperature, 110 C Rated
Optocoupler, Phototransistor Output, High Temperature, 11 C Rated 1791823 DESCRIPTION The consists of a phototransistor optically coupled to a gallium arsenide infraredemitting diode in a 4 pin plastic
More informationOptocoupler, Photodarlington Output, High Gain, Single/Quad Channel, Half Pitch Mini-Flat Package
TCMD, TCMD4 Optocoupler, Photodarlington Output, High Gain, Single/Quad Channel, Half Pitch Mini-Flat Package 9 8 FEATURES Low profile package (half pitch) 7298 7298_2 DESCRIPTION The TCMD, TCMD4 consist
More informationOptocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
More informationOptocoupler, Phototransistor Output, with Base Connection
Optocoupler, Phototransistor Output, with Base Connection i79004-3 A C NC 2 3 6 5 4 B C E FEATURES Interfaces with common logic families Input-output coupling capacitance < pf Industry standard dual-in
More informationOptocoupler, Photodarlington Output, High Gain, With Base Connection
Optocoupler, Photodarlington Output, High Gain, With Base Connection FEATURES A 6 B Very high current transfer ratio, 500 % min. C 2 NC 3 i79005_ V D E 5 4 C E High isolation resistance, 0 Ω typical Standard
More informationOptocoupler, Phototransistor Output
Optocoupler, Phototransistor Output TCDT2, TCDT2G Vishay Semiconductors 72_4 DESCRIPTION 72_6 NC C E 6 5 4 2 3 The TCDT2(G) series consists of a phototransistor optically coupled to a gallium arsenide
More informationZMY3V9 to ZMY100. Zener Diodes. Vishay Semiconductors
ZMYV9 to ZMY Zener Diodes Features Silicon Planar Power Zener Diodes For use in stablilizing and clipping circuits with high power rating e The Zener voltages are graded according to the international
More informationLH1503AAC/ AACTR/ AB. 2 Form A Solid State Relay. Vishay Semiconductors
LH153AAC/ AACTR/ AB 2 Form A Solid State Relay Features Current Limit Protection Isolation Test Voltage 53 V RMS Typical R ON 2 Ω Load Voltage 35 V Load Current 11 ma High Surge Capability Clean Bounce
More informationHigh Speed Optocoupler, 10 MBd
N/VO/VO/VO/VO/VO High Speed Optocoupler, MBd NC A C NC DESCRIPTION Single channel 8 V E V O A C C A Dual channel 8 V O V O N, VO, VO VO, VO, VO 89- The N, VO and VO are single channel Mbd optocouplers
More informationOptocoupler, Phototransistor Output, Low Input Current, With Base Connection
End of Life January-28 - Alternative Device: CNY7 MCT2 Optocoupler, Phototransistor Output, Low Input Current, With Base Connection FEATURES A 6 B Saturation CTR - MCT2, > % at I F =.6 ma i794-3 i794-7
More informationOptocoupler, Phototransistor Output, with Base Connection
Vishay Semiconductors Optocoupler, Phototransistor Output, FEATURES 2842 DESCRIPTION i79004-5 Each optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. AGENCY APPROVALS
More informationHigh Power Infrared Emitting Diode, 950 nm, GaAlAs/GaAs
TSAL74 High Power Infrared Emitting Diode, 95 nm, GaAlAs/GaAs Description TSAL74 is a high efficiency infrared emitting diode in GaAlAs on GaAs technology, molded in clear plastic packages. In comparison
More informationBFQ67 / BFQ67R / BFQ67W
Not for new design, this product will be obsoleted soon Silicon NPN Planar RF Transistor BFQ67 / BFQ67R / BFQ67W Features Small feedback capacitance Low noise figure High transition frequency Lead (Pb)-free
More informationOptocoupler, Photodarlington Output, High Gain, With Base Connection
Optocoupler, Photodarlington Output, High Gain, With Base Connection A C 2 NC 3 i79005_ V D E 6 5 4 B C E FEATURES Very high current transfer ratio, 500 % min. High isolation resistance, 0 Ω typical Standard
More informationSD103AW-V/103BW-V/103CW-V
Small Signal Schottky Diodes Features The low forward voltage drop and fast switching make it ideal for protection of MOS devices, steering, biasing, and coupling diodes for fast switching and low e3 logic
More informationParameter Test condition Symbol Value Unit Power dissipation T L 25 C P tot 500 mw Z-current I Z P tot /V Z ma
Small Signal Zener Diodes Features Silicon Planar Power Zener Diodes Standard Zener voltage tolerance is ± 5 % e2 These diodes are also available in Mini- MELF case with the type designation TZM522...
More informationOptocoupler, Low Input Current, Phototransistor Output
Optocoupler, Low Input Current, Phototransistor Output FEATURES Temperature range - 55 C to + 11 C Rated impulse voltage (transient overvoltage) V IOTM = 6 kv peak Isolation test voltage (partial discharge
More informationType Ordering Code Remarks
Silicon Epitaxial Planar Z Diodes BZX85C... Features Sharp edge in reverse characteristics Low reverse current Low noise Very high stability Available with tighter tolerances Applications Voltage stabilization
More informationPart Ordering code Type Marking Remarks BAT41 BAT41-TR or BAT41-TAP BAT41 Tape and Reel/Ammopack
Small Signal Schottky Diode Features For general purpose applications This diode features low turn-on voltage and high breakdown voltage. This device e2 is protected by a PN junction guard ring against
More informationOptocoupler, Phototransistor Output, Quad Channel, Half Pitch Mini-Flat Package
TCMT4, TCMT46 Optocoupler, Phototransistor Output, Quad Channel, Half Pitch Mini-Flat Package 22775 DESCRIPTION The TCMT4. series consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting
More informationHigh Speed Optocoupler, 1 MBd, Transistor Output
SFH3T, SFH3T, SFH343T High Speed Optocoupler, MBd, i94 DESCRIPTION SFH3/ NC A 2 C 3 NC 4 NC A 2 C 3 NC 4 i99-2 8 V CC The SFH3T, SFH3T, SFH343T, high speed optocouplers, each consists of a GaAlAs infrared
More informationBPW17N. Silicon NPN Phototransistor. Vishay Semiconductors
Silicon NPN Phototransistor Description BPW17N is a silicon NPN epitaxial planar phototransistor in a miniature plastic case with a ± 12 lens. With a lead center to center spacing of 2.54 mm and a package
More informationBPW46L. Silicon PIN Photodiode. Vishay Semiconductors
Silicon PIN Photodiode Description BPW46L is a high speed and high sensitive PIN photodiode in a flat side view plastic package. Due to its waterclear epoxy the device is sensitive to visible and infrared
More informationOptocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package
TCLT11. Series Optocoupler, Phototransistor Output, SOP-6L5, Half Pitch, Long Mini-Flat Package 22649 DESCRIPTION The TCLT11. series consists of a phototransistor optically coupled to a gallium arsenide
More informationOptocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package
ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T
More information