Professor Laurean BOGDAN, PhD My Web Page Office: "Lucian Blaga" University of Sibiu (LBUS), Department of Industrial Machinery and Equipment, E. Cioran Str., No. 4, Sibiu - 550025, ROMANIA E-Mail: laurean.bogdan@ulbsibiu.ro, My Personal Web Page: http://webspace.ulbsibiu.ro/laurean.bogdan/html/ First Name: Laurean Last Name: BOGDAN Studies: 1974-1979: Higher Education Institution graduated: Politehnica University of Bucharest, Faculty of Engineering and Management of Technological Systems (Specialty: Industrial Engineering-Machine Tools) 1988-1994: PhD studies in Industrial Engineering at Politehnica University of Bucharest 1994: PhD Title in Industrial Engineering. The PhD Thesis was entitled: Studies and research on the design of diagnostic systems for machines and tools. 1993: University of Missouri-Columbia, SUA; Lectures taught by American professors under the bilateral program Business management partnership developed between the Lucian Blaga University of Sibiu and the University of Missouri-Columbia, SUA; 1994: College of Business and Public Administration, University of Missouri-Columbia, SUA Business Management and Economics Internship: Micro Economics, Marketing Research, Federal Reserve Bank System, Futures Markets, Check Clearing Activities, Manufacturing Operations, Purchasing and Supplier Quality, Customer Relationships, Advertising and Promotion, Marketing Strategies, Higher Education Administration, Management of Business Education 1994: University of Missouri-Columbia, SUA; College of Business & Public Administration, Business Management and Economics Internship 1993-1997: Lucian Blaga University of Sibiu - College of Business and Public Administration Missouri University of Columbia USA, Microeconomics, Business, Finance, Marketing, Management, Economics of the Firm 1997: Technical University of Crete-Greece. Economics, Management and Marketing 2003: Lucian Blaga University of Sibiu, Department of Distance Learning Attestation participe a la formation de formateurs Ingenierie et Pedagogie de la Formation a Distance, organisation, conception, realisation Universite des Sciences et Technologies de Lille
2001-2005: PhD studies in Economics at Lucian Blaga University of Sibiu 2005: PhD Title in Economics. The PhD Thesis was entitled: Microeconomics and its integration within the area of macroeconomic and world economics-opportunities, assessments and constraints-simulation and optimizing in terms of change and behavioral flexibility Professional Experience: 1979-1982: MECANICA Company of Sibiu, Designer Engineer in Concept and design of operating and control equipment for machines tools and of processing through deformation 1982-1986: Teaching Assistant, "Lucian Blaga" University of Sibiu, Engineering School, Teaching activities descriptive geometry and technical drawing, 1986-1990: Lecturer, "Lucian Blaga" University of Sibiu, Engineering School. Electric actuating for machine-tools and robots, 1990-1994: Senior Lecturer, "Lucian Blaga" University of Sibiu, Engineering School. Electric actuating for machine-tools and robots, 1994-1998: Associate Professor, "L. Blaga" University of Sibiu, Engineering School, Electric actuating for machine-tools and robots, Economics of the firm, Applied Microeconomics. 1995-1997: Department of Computer Science and Electrotechnics-Head of Department 1997-2000: Scientific Secretary, Engineering School 1998-present: Professor, "Lucian Blaga" University of Sibiu, Engineering School. Electric actuating for machine-tools and robots, Automation, Economics of the firm, Applied Microeconomics. Scientific & Didactic Activity: Below it is given an image of my research activity (click here for my Complete Lists of Publications): A. Member of Scientific Committee Reviewer of OPTIROB Conferences from2009, http://www.optirob.com/#!international-committee Reviewer of ICMERA Conferences from 2010, http://www.icmera.com/#!page-6 Reviewer of ICMAS Conferences from 2010, http://icmas.eu/edit_board.htm Reviewer of International Journal of Electrical and Electronic Science, http://www.aascit.org/journal/reviewer?journalid=915 Reviewer of American Journal of Science and Technology, http://www.aascit.org/journal/reviewer?journalid=902 International Scientific Committee of OPTIROB Conferences, http://www.optirob.com/#!international-committee International Scientific Committee of ICMERA Conferences, http://www.icmera.com/#!page-6 Session co-chair of ICMERA Conferences, http://www.icmera.com/#!page-6 International Scientific Committee of ICMAS Conferences, http://icmas.eu/edit_board.htm Member of Editorial Board of Management and Economic Engineering, Revista
de management si Inginerie economica, http://rmee.org/editorial_board.htm Editorial Member of International Journal of Electrical and Electronic Science, http://www.aascit.org/journal/editorial?journalid=915 Editorial Member of International Journal of Electrical and Electronic Science of American Journal of Science and Technology, http://www.aascit.org/journal/editorial?journalid=902 Session Chairs- Programme Committee- Rewievers committee, ICREB2015, http://www.icreb.org/com.htm Technical International Rewievers Committee, ICREB2015, http://www.icreb.org/com.htm Sessions co-chairs, 2015 International Conference on Civil and Building Materials (ICCBM 2015), which will be held duringoctober 29-31, 2015, in Bucharest, http://www.iccbm.org/tc.html Technical Committee, 2015 International Conference on Civil and Building Materials (ICCBM 2015), which will be held duringoctober 29-31, 2015, in Bucharest, http://www.iccbm.org/tc.html Sessions co-chairs, 2015 International Conference on Renewable Energy and Conversation (ICREC 2015), which will be held during October 29-31, 2015, in Bucharest, Romania, http://www.icrec.org/tc.html Technical Committee, 2015 International Conference on Renewable Energy and Conversation (ICREC 2015), which will be held during October 29-31, 2015, in Bucharest, Romania, http://www.icrec.org/tc.html Session Chairs- Programme Committee- Rewievers committee, 2015 International Conference on Advances in Engineering Materials, http://www.icaem.org/com.htm Technical International Rewievers Committee 2015 International Conference on Advances in Engineering Materials, http://www.icaem.org/com.htm B. Scientific Papers 1. BOGDAN L. - Using the microcontroller and the PLC in a RPP robot control, Advanced Materials Research Vols. 463-464 (2012) pp 1721-1724, Online available since 2012/Feb/10 at www.scientific.net, (2012) Trans Tech Publications, Switzerland. doi:10.4028/www.scientific.net/amr.463-464.1721 2. BOGDAN L., Toma, E., New Solution for Telescopic Robotic Arm, Applied Mechanics and Materials Vol. 658 (2014) pp 557-562 Submitted: 25.04.2014 Online available since 2014/Oct/01 at www.scientific.net Revised: 21.05.2014 (2014) Trans Tech Publications, Switzerland Accepted: 27.05.2014 doi:10.4028/www.scientific.net/amm.658.557 3. BOGDAN L. - Some hardware and software aspects for sumobot robot control, ROBOTICA & MANAGEMENT International Journal, Vol. 16, N0 2, December 2011, pag.19, Reşiţa. 4. BOGDAN L. - Production Management and Market Constraints, Review of General Management Volume 10, Issue 2, Year 2009, ISSN 1841-818x, Publisher: Editura Expert Bucureşti - Institutul Naţional de Cercetări Economice, Central and Eastern European Online Library, File URL: http://www.managementgeneral.ro/pdf/2_2009_1.pdf, This file is part of IDEAS, which uses RePEc data, IDEAS at the Department of Economics, College of Liberal Arts and Sciences, University of Connecticut using RePEc data on a server sponsored by the Society for Economic Dynamics; JEL Classification: M11, G14.
5. BOGDAN L., Robot control using distance detection, Annals of the Oradea University, fascicle of management and Technological Engineering, Volume VIII (XVIII) pp573; 2009. 6. BOGDAN L. Programming and controlling of RPP robot by using a PLC, ANNALS OF SCIENTIFIC PAPERS INT ORADEA-2010, Fascicle of Management and Technological Engineering, VOLUME IX (XIX), 2010, ISSN 1583-0691, CNCSIS "Clasa B+", PG 2.4. 7. BOGDAN L. PLC as a driver for stepper motor control, ANNALS of the ORADEA UNIVERSITY. Fascicle of Management and Technological Engineering, Volume X (XX), ISSN 1583-0691, CNCSIS "Clasa B+", 3 issues per year, pag.3.9, 2011, NR1. 8. BOGDAN L. - Using the microcontroller and the PLC in a RPP robot control, Procedings of 2010 International Conference on Optimization of the robots and manipulators, Calimanesti, Romania, 28-30 may 2010. 9. BOGDAN L. PLC based system for incremental programming and control of robots, ROBOTICA & MANAGEMENT International Journal, Vol. 16, N0. 1, June 2011, pag.14, Reşiţa. 10. BOGDAN L. SOME HARDWARE AND SOFTWARE ASPECTS FOR SUMOBOT ROBOT CONTROL, International Journal, Vol. 16, No. 2, December 2011. 11. BOGDAN L. MANAGEMENT AND MOTION CONTROL OF BALL SCREW ACTUATORS APPLIED IN THE ROBOTIC STRUCTURES, International Journal, Vol. 17, No. 1, June 2012, pag.14. 12. BARBU ST., BOGDAN L. CHAIN TRANSMISSIONWITH HIGH PRECISION IN MOVEMENT AND POSITIONING OF ROBOTIZATED STRUCTURES, International Journal, Vol. 17, No. 1, June 2012. 13. BOGDAN, L., Telea, D., Barbu, St. Management and Motion Control of Ball SCREW Actuators Applied in The Robotic Structures, ROBOTICA & MANAGEMENT International Journal, Vol. 17, N0 1, June 2012, pag.14, Reşiţa. 14. Telea, D., BOGDAN, L. - Electromechanical Device for Acting the Grippers with DC Motors, ROBOTICA & MANAGEMENT International Journal, Vol. 17, N0, June 2012, pag.47, Reşiţa. 15 BOGDAN, L., Toma, E. Programming and Control of a Gripper Robot. Academic Journal of Manufacturing Engineering, Editura Politehnica, Volume 11, ISSUE 1/2013, ISSN: 1683-7904, Editura Politehnica, pag. 20-25. 16. BOGDAN, L. Preturile discriminatorii si paradoxul Giffen-Conferinta Eficienţă, Legalitate, Etică în Romania mileniului III, Brasov, mai 2006; 17. Minimizing costs under constraints, Lucian-Ionel Cioca, BOGDAN, L., Adrian Cioca, International Federation of Automatic Control, MCPL 2007 4th IFAC Conference on Management and Control of Production and Logistics, Sibiu, September 27-30, 2007, Preprints 1, pag. 851; http://www.ifac-papersonline.net/cgi-bin/links/search.cgi 18. Production flexibility and adapting to market changes, Lucian-Ionel Cioca, BOGDAN, L., Adrian Cioca, International Federation of Automatic Control, MCPL 2007 4th IFAC Conference on Management and Control of Production and Logistics, Sibiu, September 27-30, 2007, Preprints 2, pag. 777; http://www.ifac-papersonline.net/cgi-bin/links/search.cgi 19. BOGDAN, L, Danciu Gheorghe, Stanciulea Flavius, The Navigation Control of a Robotic Structure, Annals of the university of Oradea, 2008, Fascicle of Management and Technological Engineering, pag.914-921. ISSN1583-0691; http://imtuoradea.ro/auo.fmte/2008.index.pdf 20. BOGDAN, L., Cioca Lucian, Production Efficiency and Market Constraints, Jurnal of Proceedings of the International Conference on Manufacturing Systems ICMaS, PAG.377-380, ISSN1842-3183; http://edition2008.icmas.eu/paper_2008_viii_01.htm, http://www.icmas.eu/volume_2008.htm
21. BOGDAN, L., Gheorghe Danciu, Viorel Stancu, Motion control of a gripper robot. Optirob 2009, Constanţa-Mamaia, Romania, May 28-31, 2009, pag.173; http://imtuoradea.ro/auo.fmte/2009.index.pdf 22. BOGDAN, L., Robot control using distance detection, Annals of the Oradea University, fascicle of management and Technological Engineering, Volume VIII (XVIII) pp573; 2009; http://imtuoradea.ro/auo.fmte/archive.php 23. BOGDAN, L., Programming and control movements of a robot with a PLC, Vasile Fetche, Procedings, the 4 rd International Conference on Manufacturing Science and Education-MSe 2009, Volume I, june 4-6, 2009; http://conferences.ulbsibiu.ro/mse2009/publication.htm 24. Engineering Education and Related Educational Programs. Case Study, Lucian Ionel Cioca, BOGDAN, L., Consulting and Training Center Concept, Balkan Region Conference on Engineering and Business Education and International Conference on Engineeering and Business Education, Conference Proceedings, Volume I, 15-17 October 2009, Sibiu, Romania; http://apps.isiknowledge.com/summary.do?qid=2&product=ua&sid=z1pb9o%4064cgpc Kf9CGd&search_mode=GeneralSearch 25. BOGDAN, L., Using the microcontroller and the PLC in a RPP robot control, Procedings of 2010 International Conference on Optimization of the robots and manipulators, Calimanesti, Romania, 28-30 may 2010, Printed in Singapore, www.rpsonline.com.sg, ISBN 978-981-08-5840-7. http://optirob2010.eventbrite.com/ 26. BOGDAN, L., Programming and controlling of RPP robot by using a PLC, ANNALS OF SCIENTIFIC PAPERS INT ORADEA-2010, Fascicle of Management and Technological Engineering, VOLUME IX (XIX), 2010, ISSN 1583-0691, CNCSIS "Clasa B+", PG 2.4. http://imtuoradea.ro/auo.fmte/archive.php Fields of Interest: Industrial automation and drives; Mechatronics and Robotics; Monitoring and improving of production processes. Last updated: December 2014