DRAWING INDEX GENERAL C. PROJECT COVER G-WING A/V IMPROVEMENTS.0 AREA PLAN ST FLOOR SOUTH. TYP. PROJECTOR MOUNTING & PROJECTOR NOTES.2 G-WING TECHNOLOGY CABINET ELEVATIONS.3 G-WING WIRING DIAGRAM.4 G-WING ST FLOOR PLAN.5 G-WING 2ND FLOOR PLAN.6 ROOM: G-4.7 ROOM: G-6.8 ROOM: G-8.9 ROOM: G-0.0 ROOM: G-2. ROOM: G-4 C, D, E, H, J WING A/V IMPROVEMENTS 2.0 AREA PLAN ST FLOOR SOUTH 2. AREA PLAN ST FLOOR NORTH 2.2 TYP. PROJECTOR MOUNTING & PROJECTOR NOTES 2.3 WIRING DIAGRAM @ WING C, D, E, H & J 2.4 C-WING FLOOR PLAN - SOUTH 2.5 C-WING FLOOR PLAN - NORTH 2.6 D-WING FLOOR PLAN 2.7 E-WING FLOOR PLAN - SOUTH 2.8 E-WING FLOOR PLAN - NORTH 2.9 H-WING FLOOR PLAN 2.0 J-WING FLOOR PLAN - SOUTH 2. J-WING FLOOR PLAN - NORTH 2.2 ROOM: C- 2.3 ROOM: C-2 2.4 ROOM: C-3 2.5 ROOM: C-4 (NO WORK) 2.6 ROOM: C-5 (NO WORK) 2.7 ROOM: C-6 2.8 ROOM: C-7 2.9 ROOM: C-9 2.20 ROOM: C- 2.2 ROOM: D-4 2.22 ROOM: D-6 2.23 ROOM: D-8 2.24 ROOM: E-2 2.25 ROOM: E-3 2.26 ROOM: E-4 2.27 ROOM: E-5 2.28 ROOM: E-6 2.29 ROOM: E-7 (NO WORK) 2.30 ROOM: E-8 2.3 ROOM: E-9 2.32 ROOM: E-0 2.33 ROOM: E- 2.34 ROOM: E-2 2.35 ROOM: E-3 2.36 ROOM: H- 2.37 ROOM: H-9 2.38 ROOM: H- 2.39 ROOM: J- 2.40 ROOM: J-2 2.4 ROOM: J-3 2.42 ROOM: J-4 2.43 ROOM: J-5 GENERAL NOTES ALL WORK SHALL BE PERFORMED IN ACCORDANCE WITH ALL APPLICABLE CODES, REGULATIONS, ORDINANCES AND STANDARDS HAVING JURISDICTION, INCLUDING 2009 INTERNATIONAL BUILDING CODE (IBC) AND MEET ALL ADA REQUIREMENTS. IF THERE ARE ANY QUESTIONS OR CONFLICTS CONCERNING COMPLIANCE WITH SUCH CODES, ORDINANCES OR STANDARDS, THE CONTRACTOR IS RESPONSIBLE FOR NOTIFYING THE ARCHITECT BEFORE PROCEEDING WITH THE WORK IN QUESTION. ALL NECESSARY PERMITS, LICENSES, CERTIFICATES, TESTS, ETC. SHALL BE PROCURED AND PAID FOR PER THE PROJECT MANUAL. CONTRACTOR IS RESPONSIBLE FOR CHECKING ALL CONTRACT DOCUMENTS, FIELD CONDITIONS AND DIMENSIONS FOR ACCURACY AND CONFIRMING THAT THE WORK IS BUILDABLE AS SHOWN BEFORE PROCEEDING WITH CONSTRUCTION. IF THERE ARE ANY QUESTIONS REGARDING THESE OR OTHER COORDINATION ISSUES, THE CONTRACTOR IS RESPONSIBLE FOR OBTAINING A CLARIFICATION FROM THE ARCHITECT BEFORE PROCEEDING WITH THE WORK IN QUESTION OR RELATED WORK. THE CONTRACTOR SHALL CERTIFY SIZE AND LOCATION OF ALL REQUIRED OPENINGS FOR STRUCTURAL, MECHANICAL, ELECTRICAL AND PLUMBING WORK AND EQUIPMENT WITH TRADES INVOLVED. WRITTEN DIMENSIONS SHALL HAVE PRECEDENCE OVER SCALED DIMENSIONS. IF CLEAR DIMENSIONS CONFLICT WITH MEASURED DIMENSIONS, CLEAR DIMENSIONS SHALL HAVE PRECEDENCE. REQUIREMENT FOR "SHOP DRAWING" ON ANY ITEM SHALL INCLUDE AN ENGINEERED SHOP DRAWING SUBMITTAL TO BE PROVIDED TO THE ARCHITECT/ENGINEERS FOR REVIEW AND APPROVAL. CONTRACTOR IS RESPONSIBLE TO NOTIFY THE OWNER UPON ENCOUNTER OR DISCOVERY OF HAZARDOUS MATERIALS. PROJECT TEAM OWNER: Bozeman School District No. 7 404 West Main Street Bozeman, MT 5977 Phone: 406.522.6009 PROJECT LOCATION BOZEMAN HIGH SCHOOL ARCHITECT: Comma-q Architecture 09 N. Rouse Ave., # Bozeman, MT 5975 Phone: 406.585.2 ELECTRICAL ENGINEER: Van Dykken Engineering 37 Spanish Peak Drive Bozeman, MT 5975 Phone: 406.586.8804 Comma-Q BOZEMAN SCHOOL DISTRICT NO. 7 BOZEMAN HIGH SCHOOL A/V IMPROVEMENTS NORTH N. 9TH AVENUE BSD7 BHS A/V IMPROVEMENTS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES - BIDDING DOCUMENTS - 205 NORTH AVENUE, BOZEMAN, MT 5975.0.39 REVISIONS N. 5TH AVENUE DRAWING TITLE: DURSTON STREET MAIN STREET PROJECT COVER, INDEX & LOCATION N. TH AVENUE DRAWING NUMBER: C.
Bozeman School District No. 7 Bozeman High School A/V Improvements G WING Classrooms Comma-Q BSD7 BHS A/V IMPROVEMENTS: G WING 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.0.39 BHS Area Plan - st Floor South N.T.S. REVISIONS DRAWING TITLE: AREA PLAN ST FLOOR SOUTH DRAWING NUMBER:.0
. 4" TYP. C.L. OF LOWER ANCHOR HOLES IN WALL PLATE RAPID RUN RUNNER. WIRING DIAGRAM. INCLUDE LOOP IN CABLE TO ENSURE ADJUSTABILITY OF PROJECTOR. BUNDLE AND SUPPORT CABLE AND ROUTE NEATLY TO DEVICE PORTS. (N) PROJECTOR WALL PLATE (WALL PLATE COVER NOT SHOWN) (N) METAL WIREMOLD RACEWAY SIZED TO ACCOMMODATE CABLE, #500 MINIMUM (N) METAL WIREMOLD RACEWAY SIZED TO ACCOMMODATE WIRE, #500 MINIMUM (N) SURFACE MOUNT BOX W/ RECEPTACLE, TYP. LEFT/RIGHT SIDE OF PROJECTOR VARIES BY LOCATION, PLANS & ELEVATIONS C.L. OF LOWER ANCHOR HOLES IN WALL PLATE Typ. Wall Baseplate & Receptacle Config. - Elevation view /2" = '-0" (N) PROJECTOR WALL PLATE, W/ COVER. /3 (N) EPSON POWERLITE 485W (N) ELECTRICAL RECEPTACLE, TYP. FEED WITH LINE FROM EXISTING RECEPTACLE AS INDICATED ON PLANS & ELEVATIONS (E) FIN. CEILING, HEIGHT VARIES GENERAL PROJECT NOTES - INSTALL WALL-MOUNTED OVERHEAD PROJECTORS AT LOCATIONS AS DESCRIBED IN THE ATTACHED DRAWINGS. RELOCATE EXISTING EQUIPMENT AS REQUIRED TO PERMIT CORRECT ALIGNMENT & CONFIGURATION OF PROJECTION UNITS. PROVIDE AND INSTALL ELECTRICAL SUPPLY/RECEPTACLES (WHERE NONE EXIST) ADJACENT TO OVERHEAD PROJECTORS. ATTACHED PLANS & ELEVATIONS. - PROVIDE AND INSTALL TECHNOLOGY CABINETS AT LOCATIONS AS SPECIFIED IN THE ATTACHED DRAWINGS. - REMOVE AND/OR RELOCATE EXISTING EQUIPMENT AS INDICATED ON THE DRAWINGS. ALL EXISTING-TO-BE-REMOVED EQUIPMENT IS TO BE CAREFULLY HANDLED AS TO NOT CAUSE UNNECESSARY DAMAGE.. RETAIN EQUIPMENT ON SITE AND STORE AS REQ'D. BY OWNER. - CONTRACTOR TO SUPPLY ALL LABOR AND MATERIALS TO COMPLETE THE WORK, UNLESS NOTED OTHERWISE. CONTRACTOR TO SUPPLY RAPID RUN RUNNERS & FACEPLATES. - OWNER WILL SUPPLY ALL OVERHEAD PROJECTION UNITS (INCLUDING WALL MOUNT BRACKET), MEDIA DEVICES, PATCH CABLES & RAPID RUN FLYING LEADS. - EXISTING WALL TYPES AND FINISHES DIFFER. VERIFY PROPOSED ANCHORING SYSTEMS COMPLY WITH THE ANCHOR SYSTEMS SPECIFIED IN THE MANUFACTURERS INSTALLATION INSTRUCTIONS. - VERIFY FIELD CONDITIONS COMPLY WITH PROJECTOR INSTALLATION REQUIREMENTS PRIOR TO INSTALLATION. CONTACT THE ARCHITECT IMMEDIATELY IF FIELD CONDITIONS CONFLICT WITH THE ATTACHED DRAWINGS. - ALL WORK BEING CONDUCTED AFTER THE START OF THE BSD7 202-203 SCHOOL YEAR MUST BE PERFORMED OUTSIDE OF THE NORMAL HOURS OF SCHOOL OPERATION. PROJECT MANUAL FOR NORMAL HOURS OF SCHOOL OPERATION. - PROJECT MANUAL FOR ADDITIONAL INFORMATION. (N) WALL MOUNT & PROJECTOR 9 4 " (E) WHITEBOARD, TYP. PLANS & ELEVATIONS GENERAL ELECTRICAL NOTES (E) WHITEBOARD 3'-8" HEIGHT OF IMAGE AREA 83" IMAGE AREA 6:0 WXGA DISPLAY - RUN LINE VOLTAGE WIRING IN WIREMOLD #500 MINIMUM W/ SURFACE MOUNT BOX & RECEPTACLE, WHERE EXPOSED, TYP.. RUN WIRING IN 3#2-2"C. WHERE WIRING IS NOT IN PUBLIC VIEW, TYP. - WHEN IT IS NECESSARY TO TAP INTO AN EXISTING FLUSH MOUNT ELECT. RECEPTACLE, REMOVE EXISTING RECEPTACLE AND REPLACE WITH SURFACE MOUNT WIREMOLD BOX W/ RECEPTACLE & COVERPLATE, TYP. - EXISTING ELECTRICAL COMPONENTS AFFECTED BY OR INVOLVED WITH THE PROPOSED WORK IS NOTED ON THE ATTACHED DRAWINGS. EXISTING ELECTRICAL COMPONENTS NOT EXPLICITLY DRAWN IN THE DRAWINGS IS ASSUMED TO BE EXISTING-TO-REMAIN. EQ. 5'-0 3 8 " EQ. (E) WHITEBOARD FRAME, TYP. (E) FIN. FLOOR SIDE VIEW 2. FRONT VIEW G-Wing Typ. Projector Mounting & Configuration /2" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: G WING 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: G-WING - TYP. PROJECTOR MOUNTING & PROJECT NOTES DRAWING NUMBER:.
EXISTING-TO-REMAIN CHAIR RAIL AT G-8, G-0, G-2, G-4, HEIGHT VARIES BY LOCATION, CONTRACTOR TO VERIFY HEIGHT EXISTING-TO-REMAIN CHAIR RAIL (BEYOND), OCCURS AT G-8, G-0, G-2, G-4, HEIGHT VARIES BY LOCATION, CONTRACTOR TO VERIFY HEIGHT 2'-" 2'-6" VERIFY HEIGHT RESTRICTIONS IN FIELD IF NO HEIGHT RESTRICTIONS EXIST. CAB. HEIGHT = 36" MEL. INT. FINISH, TYP. /2" PLAM FINISH COUNTERTOP W PLAM EDGE, TYP. INCLUDE LOCKS AS SHOWN ON ELEVATIONS " OVERHANG TYP. ON ALL EXPOSED C-TOP EDGES (2) MEL. ADJUSTABLE SHELF PLAM CABINET DOOR LOCATE RAPID RUN FACE PLACE & ELECT. RECEPTACLE (WHERE OCCURS) @ CABINET SIDE PANEL PLAM @ ALL EXPOSED SIDE PANELS, NOTE BELOW REGARDING R.H. & L.H. CAB. CONFIGURATIONS 35 /2" TECH. CABINET NOTES: - WIRING DIAGRAM FOR CABINET WIRING CONFIGURATION & COORDINATION OF CABINET PENETRATIONS - VERIFY CABINET COLOR SELECTION WITH ARCHITECT LOCATE RAPID RUN FACE PLACE & ELECT. RECEPTACLE (WHERE OCCURS) @ CABINET SIDE PANEL CUT-OUT IN DOOR FOR INFRARED SENSOR ON AVERTV BOX, VERIFY EXACT LOCATION W/ MANUF. SPECIFICATIONS 4" 3" (N) RESIL. BASE LEFT-HAND CABINET CONFIGURATION PLANS & ELEVATIONS FOR QUANTITY & LOCATION RIGHT-HAND CABINET CONFIGURATION PLANS & ELEVATIONS FOR QUANTITY & LOCATION.2 G-Wing Typ. Technology Cabinet " = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: G WING 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: G-WING TECHNOLOGY CABINET ELEVATIONS DRAWING NUMBER:.2
TO HAWK TV HEADEND 6 RECEPTACLES ON 3" CENTERS PLUG STRIP 4 8 G-4, G-6 & G-8 ONLY 6 3 F F F S- VIDEO S- VIDEO 8 DVD/VCR 3 9 COMPUTER ON TOP OF TECHNOLOGY CABINET DB5 3.5 MM 7 8 VIDEO DB5 TUNER RCA AUDIO VIDEO DB5 AVERTV BOX W7 PLUS DB5 RCA DVD RCA AUDIO RCA AUDIO AMP RCA AUDIO SPADE PLUG IR SENSOR 2 6 2 4 7 OWNER FURNISHED RAPID RUN FLYING LEAD WITH DB5 & RCA CONNECTORS PLUGGED INTO MEDIA DEVICE. ATTACH OTHER END OF FLYING LEAD TO RAPID RUN RUNNER. - LABEL DB5 "VIDEO" - LABEL RCA YELLOW "VIDEO" - LABEL RCA WHITE "LEFT" - LABEL RCA RED "RIGHT" LIGHTSPEED 850 IR AVERTV BOX W7 SUPER 3 INSTALL FLUSH MOUNT RAPID RUN FACEPLATE IN EXPOSED SIDE PANEL OF CABINET (SIDE PANEL ORIENTATION VARIES, PLANS). ORIENT FINISHED FACE OF PLATE TO THE EXTERIOR OF THE CABINET. - LABEL FACEPLATE "INPUT" - LABEL DB5 "VIDEO" - LABEL 3.5MM "AUDIO" 5 5 WALL 7 DB5 RCA AUDIO VIDEO AUDIO/VIDEO EPSON POWERLITE 485W W/ WALL MOUNT VIDEO AUDIO RCA DB5 0 3.5MM DB5 CEILING 3 NOTES 7 2-8 ELECTRICAL RECEPTACLE, REFER TO POWER FLOOR PLANS 2 OWNER FURNISHED TRIPPLITE DC50SI ELECTRICAL SURGE SUPPRESSOR OR EQUAL. FASTEN TO SIDE OF WARDROBE AS SHOWN WITH ON/OFF SWITCH TO FRONT. ROUTE POWER CORD TO RECEPTACLE. 3 SURFACE MOUNT -PORT TELECOMMUNICATION OUTLET WITH F CONNECTOR. FEED FROM EXISTING HAWK TV HEADEND (LOCATED AT EXISTING WALL-MOUNTED TV). RUN IN METAL SURFACE MOUNTED RACEWAY, WHERE EXPOSED. TERMINATE, LABEL AND TEST. 4 OWNER FURNISHED AVERTV BOX W7 SUPER TUNER WITH INFRARED SENSOR. ALIGN WITH CUT-OUT IN DOOR AND FASTEN IN PLACE. 8 INSTALL OWNER FURNISHED DVD/VCR. CONNECT INPUT FROM TUNER AND OUTPUT TO AUDIO AND VIDEO DEVICES. 9 ROUTE CABLES THROUGH CUT-OUT IN SIDE OF WARDROBE. PROVIDE METAL SURFACE MOUNT RACEWAY WHERE EXPOSED. FASTEN TO BRICK WITH ANCHORS AND THREADED FASTENERS. WHERE CEILING PLENUM EXISTS, ROUTE RACEWAY TO ABOVE SUSPENDED CEILING. 0 OWNER FURNISHED EPSON POWERLITE 485W. PROVIDE SURFACE MOUNT OUTLET IN CABINET WITH FACEPLATES FOR RCA, DB5 AND 3.5MM AUDIO JACKS FACING TO THE INTERIOR OF CABINET. PROVIDE PLENUM RATED RAPID RUN RUNNER TO PROJECTOR. IN METAL SURFACE MOUNT RACEWAY WHERE EXPOSED. FASTEN TO WALL WITH ANCHORS AND THREADED FASTENERS. WHERE CEILING PLENUM EXISTS, ROUTE RACEWAY TO ABOVE SUSPENDED CEILING. TEST AND LABEL FACEPLATE: - LABEL FACEPLATE "TO PROJECTOR" - LABEL DB5 "VIDEO" - LABEL 3.5MM "AUDIO" - LABEL RCA YELLOW "VIDEO" - LABEL RCA WHITE "LEFT" - LABEL RCA RED "RIGHT" 2 INSTALL INFRARED SENSOR FOR ASSISTED LISTENING HEADPHONE. LOCATE IN CLASSROOM PER MANUF. RECOMMENDATIONS. 4 CLASSROOM TECHNOLOGY CABINET. CABINET DRAWINGS. PROVIDE SHELVING TO SUPPORT DEVICES AS SHOWN. SUPPORT CABLE SLACK IN NEAT ROUTES ALONG WALLS OF CABINET AND ROUT NEATLY TO DEVICE PORTS. BUNDLE AND SUPPORT CABLES WITH VELCRO TYPE WIRE MANAGEMENT STRAPS FASTENED TO CABINET SURFACES. 5 ROUTE LINE VOLTAGE WIRING THROUGH CUT-OUT IN SIDE OF WARDROBE. PROVIDE SURFACE MOUNT RACEWAY WHERE EXPOSED. FASTEN TO WALL WITH ANCHORS AND THREADED FASTENERS. 6 INSTALL RAPID RUN FACEPLATE HORIZONTALLY ALIGNED WITH ELECTRICAL RECEPTACLE. 7 OWNER FURNISHED LIGHTSPEED WMQ WALL/CEILING SPEAKERS INSTALLED PER MANUF. SPECIFICATIONS. ROUTE 2-8 SPEAKER WIRE FROM CABINET TO SPEAKERS. PROVIDE SURFACE MOUNT RACEWAY WHERE EXPOSED. WHERE CEILING PLENUM EXISTS, ROUTE RACEWAY TO ABOVE SUSPENDED CEILING. TEST AND LABEL. 8 INSTALL FLUSH MOUNT ELECTRICAL RECEPTACLE IN EXPOSED SIDE PANEL OF CABINET (SIDE PANEL ORIENTATION VARIES, PLANS). ORIENT FINISHED FACE OF RECEPTACLE AND COVERPLATE TO THE EXTERIOR SIDE OF THE CABINET..3 G-Wing Wiring Diagram N.T.S. 5 INFRARED SENSOR 6 OWNER FURNISHED LIGHTSPEED 850 IR AMPLIFIER. CONNECT EXTERNAL INFRARED SENSOR AND MOUNT ON CEILING ABOVE CABINET. CONNECT INPUTS FROM BUILDING SOUND SYSTEM, PC AUDIO, DVD/VCR AUDIO. CONNECT OUTPUTS TO SPEAKERS. PROVIDE ON ADDITIONAL RFDCAT HM70 MICROPHONE. Comma-Q BSD7 BHS A/V IMPROVEMENTS: G WING 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: G-WING - WIRING DIAGRAM DRAWING NUMBER:.3
5 3 2 CLASSROOM G-6.7 (E) WALL-MOUNTED T.V. (ABOVE), TO-BE-REMOVED.7 7 2 ~72" A.F.F. CLASSROOM G-4.6 (E) WALL-MOUNTED T.V. (ABOVE), TO-BE-REMOVED ~8" A.F.F. 7 TRAINING RM. G-2 (NO WORK) ~72" A.F.F. ~8" A.F.F..4 5 G-Wing Floor Plan - st Floor /8" = '-0" PLAN KEYNOTES - TYPICAL FOR S 6 & 7 (E) 20V RECEPTACLE (HEIGHT VARIES, PLANS & ELEVATIONS) 2 (N) 20V RECEPTACLE, FEED WITH POWER FROM EXISTING OUTLET AS INDICATED ON THE DRAWINGS PROVIDED, U.N.O; USE () DUPLEX RECEPTACLE, UNLESS NOTED OTHERWISE; ELEVATIONS & DETAILS FOR CORRECT INSTALL LOCATION 3 APPROX. LOCATION OF (N) PROJECTOR & WALL PLATE ( ELEVATIONS & DETAILS) 4 (N) LOW-VOLTAGE RECEPTACLE (TYPE VARIES BY LOCATION - WIRING DIAGRAM, DETAILS & ELEVATIONS) 5 (N) 20V FEED FROM EXISTING POWER TO NEW RECEPTACLE, MOUNT TO WALL SURFACE AS REQ'D. (UNLESS NOTED OTHERWISE) USING WIREMOLD AS DESCRIBED IN GENERAL ELECTRICAL NOTES 6 NO NOTE 7 (N) RIGHT-HAND CABINET 8 (N) LEFT-HAND CABINET 9 NO NOTE GENERAL NOTE: ELECT. RECEPTACLES INDICATED ON PLANS ARE 2, UNLESS NOTED OTHERWISE Comma-Q BSD7 BHS A/V IMPROVEMENTS: G WING 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: G-WING - ST FLOOR PLAN DRAWING NUMBER:.4
(E) WALL-MOUNTED T.V. (ABOVE), TO-BE-REMOVED (E) WALL-MOUNTED T.V. (ABOVE), TO-BE-REMOVED (E) WALL-MOUNTED T.V. (ABOVE), TO-BE-REMOVED (E) WALL-MOUNTED T.V. (ABOVE), TO-BE-REMOVED 7 7 ~ 8" A.F.F. ~ 96" A.F.F. 8 ~ 96" A.F.F. ~ 8" A.F.F. USE AS REQ'D. FOR POWER @ TECH. CABINET..0.9 2 CLASSROOM CLASSROOM CLASSROOM CLASSROOM G-4 G-2 G-0 3 G-8 ~ 8" A.F.F. ~ 72" A.F.F. 5 8 ~ 8" A.F.F. USE AS REQ'D. FOR POWER @ TECH. CABINET ~ 72" A.F.F..8 UPPER LEVEL G-WING NOTES: G-8, G-0, G-2, G-4 HAVE T-BAR CEILINGS ABOVE. WHERE POSSIBLE, RUN ALL NEW 20V WIRING IN PLENUM, W/ DROPS TO RECEPTACLES AS REQ'D.. FIELD VERIFY CORRIDOR ELECT. RM. CORRIDOR STAIR.5 G-Wing Floor Plan - 2nd Floor /8" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: G WING 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: G-WING - 2ND FLOOR PLAN DRAWING NUMBER:.5
Room: G-4.6
Room: G-6.7
Room: G-8.8
Room: G-0.9
Room: G-2.0
Room: G-4.
Bozeman School District No. 7 Bozeman High School A/V Improvements C, D, E, H, & J WING Classrooms Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES 2.0.0.39 BHS Area Plan - st Floor South N.T.S. REVISIONS DRAWING TITLE: AREA PLAN ST FLOOR SOUTH DRAWING NUMBER: 2.0
2. BHS Area Plan - st Floor North N.T.S. Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: AREA PLAN ST FLOOR NORTH DRAWING NUMBER: 2.
RAPID RUN RUNNER. WIRING DIAGRAM. INCLUDE LOOP IN CABLE TO ENSURE ADJUSTABILITY OF PROJECTOR. BUNDLE AND SUPPORT CABLE AND ROUTE NEATLY TO DEVICE PORTS. (N) PROJECTOR WALL PLATE (WALL PLATE COVER NOT SHOWN) (N) METAL WIREMOLD RACEWAY SIZED TO ACCOMMODATE CABLE, #500 MINIMUM GENERAL PROJECT NOTES - INSTALL WALL-MOUNTED OVERHEAD PROJECTORS AT LOCATIONS AS DESCRIBED IN THE ATTACHED DRAWINGS. RELOCATE EXISTING EQUIPMENT AS REQUIRED TO PERMIT CORRECT ALIGNMENT & CONFIGURATION OF PROJECTION UNITS. PROVIDE AND INSTALL ELECTRICAL SUPPLY/RECEPTACLES (WHERE NONE EXIST) ADJACENT TO OVERHEAD PROJECTORS. ATTACHED PLANS & ELEVATIONS. - REMOVE AND/OR RELOCATE EXISTING EQUIPMENT AS INDICATED ON THE DRAWINGS. ALL EXISTING-TO-BE-REMOVED EQUIPMENT IS TO BE CAREFULLY HANDLED AS TO NOT CAUSE UNNECESSARY DAMAGE.. RETAIN EQUIPMENT ON SITE AND STORE AS REQ'D. BY OWNER. 2.2 4" TYP. (N) METAL WIREMOLD RACEWAY SIZED TO ACCOMMODATE WIRE, #500 MINIMUM (N) SURFACE MOUNT BOX W/ RECEPTACLE, TYP. LEFT/RIGHT SIDE OF PROJECTOR VARIES BY LOCATION, PLANS & ELEVATIONS C.L. OF LOWER ANCHOR HOLES IN WALL PLATE Typ. Wall Baseplate & Receptacle Config. - Elevation view /2" = '-0" (N) PROJECTOR WALL PLATE, W/ COVER. /3 (N) EPSON POWERLITE 485W (N) ELECTRICAL RECEPTACLE, TYP. FEED WITH LINE FROM EXISTING RECEPTACLE AS INDICATED ON PLANS & ELEVATIONS - CONTRACTOR TO SUPPLY ALL LABOR AND MATERIALS TO COMPLETE THE WORK, UNLESS NOTED OTHERWISE. CONTRACTOR TO SUPPLY RAPID RUN RUNNERS & FACEPLATES. - OWNER WILL SUPPLY ALL OVERHEAD PROJECTION UNITS (INCLUDING WALL MOUNT BRACKET), MEDIA DEVICES, PATCH CABLES & RAPID RUN FLYING LEADS. - EXISTING WALL TYPES AND FINISHES DIFFER. VERIFY PROPOSED ANCHORING SYSTEMS COMPLY WITH THE ANCHOR SYSTEMS SPECIFIED IN THE MANUFACTURERS INSTALLATION INSTRUCTIONS. - VERIFY FIELD CONDITIONS COMPLY WITH PROJECTOR INSTALLATION REQUIREMENTS PRIOR TO INSTALLATION. CONTACT THE ARCHITECT IMMEDIATELY IF FIELD CONDITIONS CONFLICT WITH THE ATTACHED DRAWINGS. - ALL WORK BEING CONDUCTED AFTER THE START OF THE BSD7 202-203 SCHOOL YEAR MUST BE PERFORMED OUTSIDE OF THE NORMAL HOURS OF SCHOOL OPERATION. PROJECT MANUAL FOR NORMAL HOURS OF SCHOOL OPERATION. - PROJECT MANUAL FOR ADDITIONAL INFORMATION. C.L. OF LOWER ANCHOR HOLES IN WALL PLATE (E) FIN. CEILING, HEIGHT VARIES 9 4 " (E) WHITEBOARD, TYP. PLANS & ELEVATIONS GENERAL ELECTRICAL NOTES (N) WALL MOUNT & PROJECTOR - RUN LINE VOLTAGE WIRING IN WIREMOLD #500 MINIMUM W/ SURFACE MOUNT BOX & RECEPTACLE, WHERE EXPOSED, TYP.. RUN WIRING IN 3#2-2"C. WHERE WIRING IS NOT IN PUBLIC VIEW, TYP. (E) WHITEBOARD 3'-8" HEIGHT OF IMAGE AREA 83" IMAGE AREA 6:0 WXGA DISPLAY - WHEN IT IS NECESSARY TO TAP INTO AN EXISTING FLUSH MOUNT ELECT. RECEPTACLE, REMOVE EXISTING RECEPTACLE AND REPLACE WITH SURFACE MOUNT WIREMOLD BOX W/ RECEPTACLE & COVERPLATE, TYP. - EXISTING ELECTRICAL COMPONENTS AFFECTED BY OR INVOLVED WITH THE PROPOSED WORK IS NOTED ON THE ATTACHED DRAWINGS. EXISTING ELECTRICAL COMPONENTS NOT EXPLICITLY DRAWN IN THE DRAWINGS IS ASSUMED TO BE EXISTING-TO-REMAIN. (N) METAL SURFACE MOUNT RACEWAY. WING C, D, E, H & J ONLY. ROUTE AROUND MARKERBOARD AS REQ'D. & TERMINATE AT (N) PROJECTOR (ABOVE) (N) SURFACE MOUNT BOX W/ RAPID RUN FACEPLATE. WING C, D, E, H & J ONLY. WIRING DIAGRAMS. LOCATE ABOVE (E) ELECT. RECEPTACLE NEAREST TO THE CENTERLINE OF MARKERBORARD. EQ. 5'-0 3 8 " EQ. (E) WHITEBOARD FRAME, TYP. (E) FIN. FLOOR SIDE VIEW (E) ELECT. OUTLET NEAREST TO CENTERLINE OF MARKERBOARD FRONT VIEW 2 2.2 C, D, E, H, & J WING Typ. Projector Mounting & Configuration /2" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: TYP. PROJECTOR MOUNTING & PROJECT NOTES DRAWING NUMBER: 2.2
DB5 VIDEO CEILING NOTES RCA AUDIO ELECTRICAL RECEPTACLE, REFER TO PLANS AUIDIO/VIDEO 2 EPSON POWERLITE 485W W/ WALL MOUNT RCA DB5 3 2 OWNER FURNISHED RAPID RUN FLYING LEAD WITH DB5 & RCA CONNECTORS PLUGGED INTO MEDIA DEVICE. ATTACH OTHER END OF FLYING LEAD TO RAPID RUN RUNNER. - LABEL DB5 "VIDEO" - LABEL RCA YELLOW "VIDEO" - LABEL RCA WHITE "LEFT" - LABEL RCA RED "RIGHT" 3 OWNER FURNISHED EPSON POWERLITE 485W. 4 INSTALL SINGLE GANG SURFACE MOUNTED BOX W/ RAPID RUN FACEPLATE ON WALL BELOW EXIST. MARKERBOARD. PLANS FOR DETAILS ON EXACT LOCATION. - LABEL FACEPLATE "PROJECTOR INPUT" - LABEL DB5 "VIDEO" - LABEL 3.5MM "AUDIO" WALL COMPUTER AT FRONT OF ROOM 4 DB5 3.5 MM DB5 3.5 MM VIDEO AUDIO 2.3 C, D, E, H, & J WING Wiring Diagram N.T.S. Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: WIRING DIAGRAM @ WING C, D, E, H & J DRAWING NUMBER: 2.3
EQUAL EQUAL PLAN KEYNOTES - TYPICAL FOR S 5-2 (E) 20V RECEPTACLE (HEIGHT VARIES, PLANS & ELEVATIONS) W PLUG STRIP @ APPROX. 8" A.F.F. 2 3 RELOCATE EXISTING SCREEN TO EAST WALL (E) BEAMS ABOVE, TO-REMAIN 2.7 LIBRARY C-6 2 (N) 20V RECEPTACLE, FEED WITH POWER FROM EXISTING OUTLET AS INDICATED ON THE DRAWINGS PROVIDED, U.N.O; USE () DUPLEX RECEPTACLE, UNLESS NOTED OTHERWISE; ELEVATIONS & DETAILS FOR CORRECT INSTALL LOCATION 3 APPROX. LOCATION OF (N) PROJECTOR & WALL PLATE ( ELEVATIONS & DETAILS) 4 (N) LOW-VOLTAGE RECEPTACLE (TYPE VARIES BY LOCATION - WIRING DIAGRAM, DETAILS & ELEVATIONS) 5 (N) 20V FEED FROM EXISTING POWER TO NEW RECEPTACLE, MOUNT TO WALL SURFACE AS REQ'D. (UNLESS NOTED OTHERWISE) USING WIREMOLD AS DESCRIBED IN GENERAL ELECTRICAL NOTES GENERAL NOTE: ELECT. RECEPTACLES INDICATED ON PLANS ARE 2, UNLESS NOTED OTHERWISE C-WING MATCH LINE CORRIDOR C-5 NO WORK 5 ~8" ~8" A.F.F. CLASSROOM CLASSROOM CLASSROOM A.F.F. C-7 C-9 C- ~8" A.F.F. 2.8 RUN 20V FEED TO PROJECTOR RECEPTACLE FROM EXIST. SOURCE ALONG WEST SIDE OF (E) MARKERBOARD 5 2.9 RUN 20V FEED TO PROJECTOR RECEPTACLE FROM EXIST. SOURCE ALONG EITHER SIDE OF MARKERBOARD - CONTRACTOR'S CHOICE 5 RUN 20V FEED TO PROJECTOR RECEPTACLE FROM EXIST. SOURCE ALONG EITHER SIDE OF MARKERBOARD - CONTRACTOR'S CHOICE 2.20 2.4 C-Wing Floor Plan - South /8" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: C-WING FLOOR PLAN - SOUTH DRAWING NUMBER: 2.4
2.3 CLASSROOM C-2 ~72" A.F.F. 2 3 C-2A NO WORK NO WORK ART CLASSROOM C-4 OFFICE C-WING MATCH LINE ~72" A.F.F. 2.2 SCIENCE CLASSROOM C- ~72" A.F.F. CLASSROOM C-3 2.4 C-5A 2.5 C-Wing Floor Plan - North /8" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: C-WING FLOOR PLAN - NORTH DRAWING NUMBER: 2.5
SCIENCE SCIENCE SCIENCE CLASSROOM ~72" CLASSROOM CLASSROOM D-8 A.F.F. D-6 D-4 2.23 ~60" A.F.F. TO-BE-REMOVED ~8" A.F.F. TO-REMAIN DOUBLE DUPLEX RECEPTACLE, ELEVATIONS 2 3 2.22 ~72" A.F.F. TO-BE-RELOCATED NEW LOCATION OF EXIST. RECEPTACLE 2 2.2 5 CORRIDOR RAMP 2.6 D-Wing Floor Plan /8" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: D-WING FLOOR PLAN DRAWING NUMBER: 2.6
~60" A.F.F. ~66" A.F.F. 2.24 E-7 NO WORK CLASSROOM CLASSROOM E-5 E-3 2.27 E-WING MATCH LINE CORRIDOR CLASSROOM E-6 (E) SCREEN TO-REMAIN ~8" A.F.F. 2.28 RUN 20V FEED TO PROJECTOR RECEPTACLE FROM EXIST. SOURCE ALONG WEST SIDE OF (E) MARKERBOARD 5 CLASSROOM E-4 ~30" A.F.F. 2.26 2.24 CLASSROOM E-2 ~72" A.F.F. 3 2 5 CORRIDOR 2.7 E-Wing Floor Plan - South /8" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: E-WING FLOOR PLAN - SOUTH DRAWING NUMBER: 2.7
~72" A.F.F. 5 ~30" A.F.F. (E) JUNCTION BOX @ APPROX. 8" A.F.F. MOUNT ON BEAM ADJACENT TO EXIST. PROJECTOR 2 CLASSROOM E-3 2.35 CLASSROOM E- 2.33 (E) PROJECTOR MOUNTED TO B.O. BEAM, TO-REMAIN CLASSROOM E-9 2.3 (E) BEAMS ABOVE, TO-REMAIN CORRIDOR E-WING MATCH LINE ~54" A.F.F. ~36" A.F.F. ~60" A.F.F. 5 CLASSROOM E-2 CLASSROOM E-0 2 CLASSROOM E-8 2.34 2.32 3 2.30 2.8 E-Wing Floor Plan - North /8" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: E-WING FLOOR PLAN - NORTH DRAWING NUMBER: 2.8
H-WING NOTES: H-, H-9 & H- HAVE T-BAR CEILINGS ABOVE. WHERE POSSIBLE, RUN ALL NEW 20V WIRING IN PLENUM, W/ DROPS TO RECEPTACLES AS REQ'D.. CLASSROOM CLASSROOM H- H-9 ~24" A.F.F. 2.38 2.37 ~60" A.F.F. M W ~24" A.F.F. CLASSROOM H- 2.36 (E) ASSUMED 20V JUNCTION BOX, APPROX. 48" A.F.F. 5 WIRING OPTION # 3 5 WIRING OPTION #2 CONTRACTOR'S CHOICE 2.9 H-Wing Floor Plan /8" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: H-WING FLOOR PLAN DRAWING NUMBER: 2.9
~60" A.F.F. 5 2.39 CLASSROOM CLASSROOM J-2 2 3 J- RAMP 2.40 ~60" A.F.F. CORRIDOR 2.0 J-Wing Floor Plan - South /8" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: J-WING FLOOR PLAN - SOUTH DRAWING NUMBER: 2.0
2.4 RAMP ~8" A.F.F. CLASSROOM CLASSROOM CLASSROOM 3 J-5 J-3 2 5 ~60" A.F.F. J-4 2.43 2.42 3 SIM., USE EXIST. ADJACENT ELECT. RECEPTACLE TO POWER PROJECTOR - NO NEW RECEPTACLE REQ'D. ~90" A.F.F. RAMP C 2. J-Wing Floor Plan - North /8" = '-0" Comma-Q BSD7 BHS A/V IMPROVEMENTS: C, D, E, H, J WINGS 205 North th Avenue Bozeman, MT 5975 DATE: SCALE: PROJECT #: Architecture, Inc. 08/27/2 VARIES.0.39 REVISIONS DRAWING TITLE: J-WING FLOOR PLAN - NORTH DRAWING NUMBER: 2.
Room: C- 2.2
Room: C-2 2.3
Room: C-3 2.4
NO WORK Room: C-4 2.5
NO WORK Room: C-5 2.6
Room: C-6 2.7
Room: C-7 2.8
Room: C-9 2.9
Room: C- 2.20
Room: D-4 2.2
Room: D-6 2.22
Room: D-8 2.23
Room: E-2 2.24
Room: E-3 2.25
Room: E-4 2.26
Room: E-5 2.27
Room: E-6 2.28
NO WORK Room: E-7 2.29
Room: E-8 2.30
Room: E-9 2.3
Room: E-0 2.32
Room: E- 2.33
Room: E-2 2.34
Room: E-3 2.35
Room: H- 2.36
Room: H-9 2.37
Room: H- 2.38
Room: J- 2.39
Room: J-2 2.40
Room: J-3 2.4
Room: J-4 2.42
Room: J-5 2.43