RoHS Agency Approvals Agency Agency File Number 7596, 5659, 3 Description The of transient voltage surge suppressors are radial leaded varistors (MOVs) that are designed to be operated continuously across AC power lines. These UL recognized varistors require very little mounting space, and are offered in various standard lead form options. The varistors are available in four model sizes: 7mm, mm, 4mm and 0mm; and have a V M(AC)RMS voltage range from 30V to 00V, and an energy absorption capability up to 360J. Some model numbers are available with clamping voltage selections, designated by a model number suffix of either A or B. The 'A' selection is the standard model; the 'B' selection provides a lower clamping voltage. See Device Ratings and Specifications Table for part number and brand information. 6895 Features LR9788 40-006 compliant option available. lease see the device and ratings specifications table for more information. voltage range V M(AC)RMS 30V to 00V 85ºC ambient capability (W TM ) up to 360J reel or bulk pack Absolute Maximum Ratings Continuous Units Steady State Applied Voltage: AC Voltage Range (V M(AC)RMS ) 30 to 00 V DC Voltage Range (V M(DC) ) 75 to V Transients: eak ulse Current (I TM ) For 8/0μs Current Wave (See Figure ) to 6 A Single ulse nergy Range For /00μs Current Wave (W TM ) to 360 J Operating Ambient Temperature Range (T A ) -55 to +85 O C Storage Temperature Range (T STG ) -55 to +5 O C Temperature Coefficient (a V ) of Clamping Voltage (V C ) at Specified Test Current <0.0 %/ O C Hi-ot ncapsulation (COATING Isolation Voltage Capability) (Dielectric must withstand indicated DC voltage for one minute per MIL-STD 0, Method 30) V COATING Insulation Resistance 00 MΩ CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. 8 Littelfuse, Inc. Revision: January 9, 9
Ratings & Specifications Lead free and RoHS Compliant Models Standard Models Model Size Disc Dia. (mm) Maximum Rating (85 C) Specifications (5 C) Continuous Transient Varistor Maximum Typical Voltage at nergy eak Clamping Capacitance f = ma V Voltage RMS V DC x Current DC Test 00μs 8 x 0μs 8 x 0 μs MHz Current art art V Branding Branding M(AC) V M(DC) W TM I TM V Min Max C I K C Number Number (V) (V) (J) (A) (V) (V) (V) (A) (pf) V30LA 30 V30LA 30 7 30 75 84 55 390 80 V30LA 30 V30LA 30 7 30 75 84 8 340 80 V30LA5 305 V30LA5 305 30 75 0 84 8 340 5 4 V30LAA 30L V30LAA 30L 4 30 75 38 4 84 8 340 00 V30LA0A 30L0 30LA0A 30L0 0 30 75 70 6 84 8 340 0 900 V30LA0B 30L0B V30LA0B 30L0B 0 30 75 70 6 84 0 35 0 900 V40LA 40 V40LA 40 7 40 80 98 4 360 60 V40LA5 405 V40LA5 405 40 80 98 4 360 5 400 V40LAA 40L V40LAA 40L 4 40 80 4 4 98 4 360 900 V40LA0A 40L0 V40LA0A 40L0 0 40 80 75 6 98 4 340 0 7 VLA VLA 7 3 84 430 VLA VLA 7 3 68 395 VLA5 5 VLA5 5 5 68 395 5 360 VLAA L VLAA L 4 45 4 68 395 800 VLA0A L0 VLA0A L0 0 80 6 68 395 0 600 VLA0B L0B VLA0B L0B 0 80 6 43 360 0 600 V75LA 75 V75LA 75 7 75 5 5 47 303 455 30 V75LA5 755 V75LA5 755 75 5 30 47 303 455 5 3 V75LAA 75L V75LAA 75L 4 75 5 55 4 47 303 455 V75LA0A 75L0 V75LA0A 75L0 0 75 5 90 6 47 303 455 0 400 V30LA4 304 V30LA4 304 7 30 0 34 396 595 0 V30LA 30L V30LA 30L 30 35 34 396 595 5 V30LA0A 30L0 V30LA0A 30L0 4 30 70 4 34 396 595 5 V30LA40A 30L40 V30LA40A 30L40 0 30 6 34 396 595 0 0 VLA VLA 7 330 354 473 730 90 VLA4 4 VLA4 4 7 330 354 49 6 90 VLA L VLA L 330 40 354 49 6 5 0 VLA0A L0 VLA0A L0 4 330 7 4 354 49 6 VLA40A L40 VLA40A L40 0 330 30 6 354 49 6 0 00 VLA40B L40B VLA40B L40B 0 330 30 6 354 43 60 0 00 V75LA 75 V75LA 75 7 75 369 3 389 55 775 80 V75LA4 754 V75LA4 754 7 75 369 3 389 473 7 80 V75LA 75L V75LA 75L 75 369 45 389 473 7 5 V75LA0A 75L0 V75LA0A 75L0 4 75 369 75 4 389 473 7 4 V75LA40A 75L40 V75LA40A 75L40 0 75 369 40 6 389 473 7 0 900 V75LA40B 75L40B V75LA40B 75L40B 0 75 369 40 6 389 453 680 0 900 VLA VLA 7 405 5 40 565 870 70 VLA4 4 VLA4 4 7 405 5 40 57 775 70 VLA L VLA L 405 46 40 57 775 5 80 VLA0A L0 VLA0A L0 4 405 77 4 40 57 775 400 VLA40A L40 VLA40A L40 0 405 65 6 40 57 775 0 800 V30LA7 307 V30LA7 307 7 30 40 5 46 565 8 65 V30LA 30L V30LA 30L 30 40 48 46 565 8 5 70 V30LA0A 30L0 V30LA0A 30L0 4 30 40 80 4 46 565 8 380 V30LA40B 30L40 V30LA40B 30L40 0 30 40 6 46 540 8 0 7 V385LA7 3857 V385LA7 3857 7 385 5 7 558 68 5 60 V385LA 385L V385LA 385L 385 5 5 558 68 5 5 60 V385LA0A 385L0 V385LA0A 385L0 4 385 5 85 4 558 68 5 360 V NOM V NOM Revision: January 9, 9 8 Littelfuse, Inc.
Ratings & Specifications (Continued...) Lead free and RoHS Compliant Models Standard Models Model Size Disc Dia. (mm) Maximum Rating (85 C) Specifications (5 C) Continuous Transient Varistor Maximum Typical Voltage at nergy eak Clamping Capacitance f = ma V Voltage RMS V DC x Current DC Test 00μs 8 x 0μs 8 x 0 μs MHz Current art art V Branding Branding M(AC) V M(DC) W TM I TM V Min Max C I K C Number Number (V) (V) (J) (A) (V) (V) (V) (A) (pf) V385LA40B 385L40 V385LA40B 385L40 0 385 5 60 6 558 68 5 0 V40LA7 407 V40LA7 407 7 40 560 30 6 748 0 55 V40LA 40L V40LA 40L 40 560 55 6 748 0 5 40 V40LA0A 40L0 V40LA0A 40L0 4 40 560 90 4 6 748 0 V40LA40B 40L40 V40LA40B 40L40 0 40 560 60 6 6 70 60 0 600 V460LA7 4607 V460LA7 4607 7 460 65 37 70 858 30 55 V480LA7 4807 V480LA7 4807 7 480 640 35 670 85 40 V480LA 480L V480LA 480L 480 640 60 670 85 40 5 0 V480LA40A 480L40 V480LA40A 480L40 4 480 640 5 4 670 85 40 70 V480LA80B 480L80 V480LA80B 480L80 0 480 640 80 6 670 790 60 0 5 V5LA 5L V5LA 5L 5 675 63 735 9 3 5 0 V5LA40A 5L40 V5LA40A 5L40 4 5 675 4 735 9 3 V5LA80B 5L80 V5LA80B 5L80 0 5 675 90 6 735 860 80 0 V575LA 575L V575LA 575L 575 730 65 805 00 5 90 V575LA40A 575L40 V575LA40A 575L40 4 575 730 0 4 805 00 0 V575LA80B 575L80 V575LA80B 575L80 0 575 730 0 6 805 960 4 0 4 V65LA 65L V65LA 65L 65 85 67 900 0 6 5 80 V65LA40A 65L40 V65LA40A 65L40 4 65 85 5 4 900 0 6 V65LA80B 65L80 V65LA80B 65L80 0 65 85 30 6 900 0 6 0 45 V680LA 680L V680LA 680L 680 875 75 990 40 875 5 65 V680LA80A 680L80 V680LA80A 680L80 4 680 875 45 4 990 40 875 90 V680LA0B 680L0 V680LA0B 680L0 0 680 875 60 6 990 30 0 380 V660LA 660L V660LA 660L 660 8 70 940 80 5 70 V660LAA 660L V660LAA 660L 4 660 8 40 4 940 80 V660LA0B 660L0 V660LA0B 660L0 0 660 8 6 940 0 6 0 400 V00LA80A 00L8 V00LA80A 00L80 4 00 0 4 45 800 30 V00LA60B 00L6 V00LA60B 00L60 0 00 360 6 45 600 40 0 V NOM V NOM NOT: Average power dissipation of transients not to exceed 0.5W, 0.4W, 0.6W or W for model sizes 7mm, mm, 4mm and 0mm, respectively. 8 Littelfuse, Inc. 3 Revision: January 9, 9
ower Dissipation Ratings eak ulse Current Test Waveform Should transients occur in rapid succession, the average power dissipation is the energy (watt-seconds) per pulse times the number of pulses per second. The power so developed must be within the specifications shown on the Device Ratings and Specifications Table for the specific device.the operating values of a MOV need to be derated at high temperatures as shown in the diagram below. Because varistors only dissipate a relatively small amount of average power they are not suitable for repetitive applications that involve substantial amounts of average power dissipation. RCNT OF AK VALU 0 90 Current nergy and ower Derating Curve Figure O TT T TIM RCNT OF RATD VALU Figure 0 90 80 70 60 40 30 0 0-55 60 70 80 90 0 0 30 40 AMBINT TMRATUR ( o C) 0 = Virtual Origin of Wave T = Time from % to 90% of eak T = Rise Time =.5 x T T = Decay Time xample - For an 8/0 μs Current Waveform: 8μs = T = Rise Time 0μs = T = Decay Time 4 Revision: January 9, 9 8 Littelfuse, Inc.
Transient V-I Characteristics Curves ulse Rating Curves Maximum Clamping Voltage for 7mm arts V30LA() - VLA() Repetitive Surge Capability for 7mm arts V30LA() - V480LA7() 6,000 MODL SIZ 7mm MODL SIZ 7mm 4,000 30 TO V M(AC) RATING V30LA() - V480LA7() 3 4 5 V75LA() 0 6 VLA() 900 800 VLA() 0 600 400 VLA() 5 INDFINIT V30LA() -3 - - 0 3 4 0 0 IMULS DURATION (μs) Figure 3 Figure 4,000 V30LA() - VLA4() SURG CURRNT (A) 4,000 900 800 600 400 MODL SIZ 7mm 30 TO V M(AC) RATING VLA4() V75LA4() VLA4() V30LA4() V75LA() VLA() V40LA() V30LA() 0-3 - - 0 3 4 Figure 5 V30LA7() - V480LA7() MODL SIZ 7mm 30 TO 480V M(AC) RATING Figure 6 V460LA7() V480LA7() V40LA7() V385LA7() V30LA7() -3 - - 0 3 4 8 Littelfuse, Inc. 5 Revision: January 9, 9
Transient V-I Characteristics Curves (Continued...) ulse Rating Curves (Continued...) Maximum Clamping Voltage for mm arts V30LA5() - V40LA() 6,000 4,000 MODL SIZ mm 30 TO 40V M(AC) RATING V75LA() VLA() V30LA() V40LA() 900 800 600 400 V75LA5() VLA5() V40LA5() V30LA5() -3 - - 0 3 4 Figure 7 Repetitive Surge Capability for mm arts V30LA5() - V680LA() SURG CURRNT (A) MODL SIZ mm V30LA5() - V680LA() 3 4 5 6 0 0 5 INDFINIT 0 0,000 Figure 8 IMULS DURATION (μs) VLA() - V680LA() MODL SIZ mm TO 680V M(AC) RATING Figure 9 VLA() V30LA() V65LA() V660LA() V680LA() V575LA() V5LA() V480LA() V385LA() -3 - - 0 3 4 6 Revision: January 9, 9 8 Littelfuse, Inc.
Transient V-I Characteristics Curves (Continued...) ulse Rating Curves (Continued...) Maximum Clamping Voltage for 4mm arts Repetitive Surge Capability for 4mm arts V30LAA() - V30LA0A 6,000 MODL SIZ 4mm MODL SIZ 4mm 4,000 30 TO 30V M(AC) RATING V30LAA() - V30LA0A() 3 4 V75LA0A() 5 VLA0A() VLA0A() V30LA0A() V30LA0A() 0 900 800 600 400 V75LAA() 0 INDFINIT VLAA() V40LAA() 5 V30LAA() -3 - - 0 3 4 0 0,000 IMULS DURATION (μs) Figure Figure V30LAA() - V30LA0A() SURG CURRNT (A) V385LA0A() V00LA80A() V385LA0A() - V00LA80A() V660LAA() V65LA40A() MODL SIZ 4mm 385 TO 00V M(AC) RATING V00LA80A() V680LA80A() 0 V575LA40A() V5LA40A() INDFINIT V480LA40A() V40LA0A() 5-4 -3 - - 0 3 4 0 0 IMULS DURATION (μs) Figure Figure 3 V385LA0A(),000 SURG CURRNT (A) 0 3 4 5 6 MODL SIZ 4mm V385LA0A() - V00LA80A() 8 Littelfuse, Inc. 7 Revision: January 9, 9
Transient V-I Characteristics Curves (Continued...) ulse Rating Curves (Continued...) Maximum Clamping Voltage for 0mm arts V30LA0A() - V75LA40A() 900 800 600 400 MODL SIZ 0mm 30 TO 75V M(AC) RATING V75LA40A() VLA40A() V75LA0A() VLA40A - V00LA60B VLA0A() V30LA0A() -3 - - 0 3 4 Figure 4 Figure 5 MODL SIZ 0mm TO 00V M(AC) RATING V65LA80B() V660LA0B() V575LA80B() V5LA80B() V480LA80B() V680LA0B() V00LA60B() V40LA40B() V385LA40B() V30LA40B() VLA40A() -3 - - 0 3 4 V30LA0B() - V75LA40() V30LA0A() - V75LA40A() 900 800 600 400 V30LA0B() -3 - - 0 3 4 Figure 6 Figure 7 MODL SIZ 0mm 30 TO 75V M(AC) RATING V75LA40B() VLA40B() VLA0B() MODL SIZ 0mm 40 TO 30V M(AC) RATING V30LA40A() V40LA0A() -3 - - 0 3 4 Repetitive Surge Capability for 0mm arts V30LA0A() - V30LA40B(),000 MODL SIZ 0mm V30LA0A() - V30LA40B() 3 4 5 6 0 0 INDFINIT 5 SURG CURRNT (A) 0 0,000 Figure 8 IMULS DURATION (μs) V385LA40B() - V00LA60B(),000 MODL SIZ 0mm V385LA40B() - V00LA60B() 3 4 5 6 0 0 INDFINIT 5 SURG CURRNT (A) 0 0,000 Figure 9 IMULS DURATION (μs) NOT: If pulse ratings are exceeded, a shift of V N(DC) (at specified current) of more than +/-% could result. This type of shift, which normally results in a decrease of V N(DC), may result in the device not meeting the original published specifications, but does not prevent the device from continuing to function, and to provide ample protection. 8 Revision: January 9, 9 8 Littelfuse, Inc.
Wave Solder rofile Non Lead free rofile Lead free rofile Maximum Wave 40C Maximum Wave 60C TMRATUR (ºC) 0 TMRATUR (ºC) 0 0 0 0 0.5.5.5 3 3.5 4 0 0.5.5.5 3 3.5 4 Figure 0 TIM(MINUTS) Figure TIM(MINUTS) hysical Specifications nvironmental Specifications Lead Material Tin Coated Copper Wire Operating Ambient Temperature Range -55 C to +85 C Soldering Characteristics Solderability per MIL STD 0, Method 08 Storage Temperature Range -55 C to +5 C Insulating Material Device Labeling Cured, flame retardant epoxy polymer meets UL94V 0 requirements Marked with LF, voltage, UL/CSA logos, and date code Humidity Aging Thermal Shock +85 C, 85% RH, 00 hours +/-% typical voltage change +85 C to -40 C 5 times +/-% typical voltage change Solvent Resistance MIL STD 0, Method 5F Moisture Sensitivity Level, J STD 00C 8 Littelfuse, Inc. 9 Revision: January 9, 9
Varistors for Hi-Temperature Operating Conditions: ncapsulation (Isolation Voltage Capability) = V. roduct Dimensions (mm) *SATING LAN A TRIM L TRIM CRIMD AND TRIMMD LAD Crimped leads are standard on LA types supplied in tape and reel and are denoted by the model letter "T." Model letter "S" denotes straight leads and letter "U" denotes special under-crimped leads. *Seating plane interpretation per IC-77 Dimension V RMS Voltage Model Min. 7mm Size mm Size 4mm Size 0mm Size Max. Min. Max. Min. Max. Min. Max. V30LA- - - 6-0 - 6.5 A V30LA - (0.47) - (0.630) - (0.787) - (.043) V385LA- - 3-7 - 0.5-8 V00LA - (0.05) - (0.689) - (0.807) - (.) ØD All - 9 (0.354) -.5 (0.49) - 7 (0.669) - 3 (0.906) e All 4 (0.57) 6 (0.36) 6.5 (0.56) 8.5 (0.335) 6.5 (0.56) 8.5 (0.335) e Øb 6.5 (0.56) (Note ) 8.5 (Note ) V30LA-.5 3.5.5 3.5.5 3.5.5 3.5 V30LA (0.059) (0.38) (0.059) (0.38) (0.059) (0.38) (0.059) (0.38) V385LA-.5 5.5.5 5.5.5 5.5.5 5.5 V00LA (0.098) (0.7) (0.098) (0.7) (0.098) (0.7) (0.098) (0.7) V30LA- - 5.6-5.6-5.6-5.6 V30LA - (0.0) - (0.0) - (0.0) - (0.0) V385LA- - 7.3-7.3-7.3-7.3 V5LA - (0.87) - (0.87) - (0.87) - (0.87) V5LA- - 8.3-8.3-8.3-8.3 V680LA - (0.37) - (0.37) - (0.37) - (0.37) V00LA - - - - -.8 (0.45) -.8 (0.45) All (Note 3) 0.585 (0.03) 0.685 (0.07) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) (Note ) 0.86 (0.034) (Note ) A TRIM All - 5 (0.59) - 9.5 (0.768) -.5 (0.886) (NOT 4) - 9.0 (.4) L TRIM All.4 (0.095) 4.69 (0.85).4 (0.095) 4.69 (0.85).4 (0.095) 4.69 (0.85).4 (0.095) 4.69 (0.85) Notes :. Dimensions in millimeters, (inches) in parentheses.. mm (9mm Min. & mm Max.) ALSO AVAILABL; see additional lead style options 3. 00V parts supplied with lead wire of diameter.00 -/+ 0.05 (0.039 -/+ 0.00) 4. 'A' Max. for V00LC80A () = 4.00 (0.945 ) 0 Revision: January 9, 9 8 Littelfuse, Inc.
Tape and Reel Specifications (Dimensions presented on following page.) 7mm Devices, 4 and 0mm Devices CRIMD LADS "LT" CRIMD LADS "LT" H SATING LAN C H SATING LAN C H0 Db W0 W W H0 Db W0 W W W W DD0 DD0 0 F t F t STRAIGHT LADS "LS" STRAIGHT LADS "LS" H H H Db W0 W W H Db W0 W W W W DD0 DD0 0 F t 0 F t UNDR-CRIMD LADS "LU" UNDR-CRIMD LADS "LU" H U H U Ho Db W0 W W Ho Db W0 W W W W DD0 DD0 0 F t 0 F t 8 Littelfuse, Inc. Revision: January 9, 9
Tape and Reel Specifications (continued) Symbol Description Model Size 7mm mm 4mm 0mm itch of Component.7 +/-.0 5.4 +/-.0 5.4 +/-.0 5.4 +/-.0 0 Feed Hole itch.7 +/- 0..7 +/- 0..7 +/- 0..7 +/- 0. Feed Hole Center to itch 3.85 +/- 0.7 8.85 +/- 0.7 8.85 +/- 0.7 8.85 +/- 0.7 Hole Center to Component Center 6.35 +/- 0.7.7 +/- 0.7.7 +/- 0.7.7 +/- 0.7 F Lead to Lead Distance 5.0 +/- 0.8 7.5 +/-0.8 7.5 +/- 0.8 7.5 +/- 0.8 h Component Alignment.0 Max.0 Max.0 Max.0 Max W Tape Width 8.0 +.0 / -0.5 8.0 +.0 / -0.5 8.0 +.0 / -0.5 8.0 +.0 / -0.5 W 0 Hold Down Tape Width.0 +/- 0.3.0 +/- 0.3.0 +/- 0.3.0 +/- 0.3 W Hole osition 9.0 +0.75 / -0. 9.0 +0.75 / -0. 9.0 +0.75 / -0. 9.0 +0.75 / -0. W Hold Down Tape osition 0.5 Max 0.5 Max 0.5 Max 0.5 Max H Height from Tape Center to Component Base 8.0 +.0 / -0.0 8.0 +.0 / -0.0 8.0 +.0 / -0.0 8.0 +.0 / -0.0 H 0 Seating lane Height 6.0 +/- 0.5 6.0 +/- 0.5 6.0 +/- 0.5 6.0 +/- 0.5 H Component Height 3.0 Max 36.0 Max 40.0 Max 46.5 Max D 0 Feed Hole Diameter 4.0 +/- 0. 4.0 +/- 0. 4.0 +/- 0. 4.0 +/- 0. T Total Tape Thickness 0.7 +/- 0. 0.7 +/- 0. 0.7 +/- 0. 0.7 +/- 0. U Under-crimp Width 8.0 Max 8.0 Max 8.0 Max 8.0 Max Component Alignment 3 Max.00mm 3 Max.00mm 3 Max.00mm 3 Max NOT: Dimensions are in mm. Standard Bulk ack Quantity Standard Bulk ack Quantity Varistor Voltage Model Varistor Model Size 7mm mm 4mm 0mm 30-75 00-460 00 600 400 5-65 00 400 660 N/A 00 400 680 N/A 00 400 00 N/A N/A Revision: January 9, 9 8 Littelfuse, Inc.
art Numbering System BAS ART CODS (See Ratings & Specifications tables and notes below) OTION CODS (See notes below) V XXXX LA XX X XXXXX For VARISTOR V M(AC) (Three or four digits -- 30V to V) SRIS + ACKAGING / LAD STYL DSIGNATOR (See BAS ART CODS notes below) LA = Bulk ack / Straight Leads (standard) LC = Bulk ack / Crimped and Trimmed Leads LS = Tape and Reel / Straight Leads LT = Tape and Reel / Crimped Leads LU = Tape and Reel / Under-Crimped Leads RLATIV NRGY INDICATOR (One or Two Digits) CLAM VOLTAG VARIANT (One digit, where applicable) See OTIONS CODS notes below : LAD-FR AND RoHS COMLIANT OTION For standard parts, use the BAS ART designator only. For parts with non-standard options (such as additional form, packaging and lead space options), use BAS ART + OTION COD. OTION COD items are subject to availability and minimum order requirements. lease contact a Littelfuse products representative for additional information or questions Ordering Notes: BAS ART CODS: Series + ackaging / Lead Style Designators: Ordering examples: Straight Lead Bulk ack (standard) Straight Lead Tape & Reel Crimped Lead Tape & Reel Crimped & Trimmed Lead Bulk ack Under- Crimp Lead Tape & Reel V30LA V30LS V30LT V30LC V30LU Crimped leads are standard on varistors supplied in tape and reel, denoted with "LT." For crimped leads without trimming and any varitions other than that described above, please contact Littelfuse. OTION CODS: X: MM LAD SACING OTION -- For (-/+) mm lead spacing (available on 0mm diameter models only), append standard model BAS ART number with "X." xample: Standard Model V30LA0A Order As V30LA0AX X855: Nickel Barrier COATD WIR OTION -- All standard parts use Tin coated Copper wire. Nickel Barrier coated wire is available as an option, consisting of Copper wire with a flashing of Nickel followed by a top coating of Tin. To order append standard model BAS ART number with "X855." xample: Lead free / RoHS Designator: For Lead free and RoHS compliant parts add "" after the BAS ART number and before any other OTION COD: Standard Model V30LA Order As V30LA Standard Model V30LA0A Order As V30LA0AX855 Littelfuse varistors are shipped standard in bulk pack with straight leads and lead spacing outlined in the ackage Dimensions section of this data sheet. Contact your Littelfuse sales representative to discuss non-standard options. Standard Model with Option V40LA0AX347 Order As V40LA0AX347 8 Littelfuse, Inc. 3 Revision: January 9, 9