amplifiers Typical Applications The is ideal for: Microwave Radio Military & Space Test Instrumentation VSAT Functional Diagram Features Ultra Low Phase Noise: -67 dbc/hz @ khz Noise Figure: 4.5 db Gain: db Psat: 22 dbm 5 Ohm Matched Input/Output Single Supply Voltage: +7V @ 7mA Hermetically Sealed Module Field Replaceable SMA Connectors -55 C to +85 C Operating Temperature General Description The is a GaAs HBT Ultra Low Noise Amplifier in a miniature, hermetic module designed to operate between 6 and 2 GHz. This high dynamic range amplifier module provides db of gain, 4.5 db noise figure and up to 23 db of output power with a single supply of +7V. The ultra low phase noise contribution of -67 dbc/hz at khz offset, enables superior modulation accuracy within transceiver architectures. The wideband distributed amplifier I/O s are internally matched to 5 Ohms and DC blocked for robust performance. The module features removable sma connectors which can be detached to allow direct connection of the I/O pins to a microstrip or coplanar circuit. Electrical Specifications, T A = +25 C, Vdc = +7V Parameter Min. Typ. Max. Units Frequency Range 6-2 GHz Gain 9 db Gain Flatness ± db Gain Variation Over Temperature.5 db/ C Noise Figure 4.5 db Input Return Loss 5 db Output Return Loss 5 db Output Power for db Compression (PdB) 7 2 dbm Saturated Output Power (Psat) 22 dbm Output Third Order Intercept (IP3) 34 dbm Phase Noise @ Hz, Psat, GHz -57 dbc/hz Phase Noise @ khz, Psat, GHz -67 dbc/hz Phase Noise @ khz, Psat, GHz -76 dbc/hz Phase Noise @ khz, Psat, GHz -8 dbc/hz Supply Current 7 2 ma -
Gain & Return Loss Gain vs. Temperature 2 2 RESPONSE (db) - -2-3 S2 S S22 GAIN (db) 5 5 Amplifiers -4 4 8 2 6 2 5 6 7 8 9 2 3 Input Return Loss vs. Temperature Output Return Loss vs. Temperature RETURN LOSS (db) - -2-3 RETURN LOSS (db) - -2-3 -4 5 6 7 8 9 2 3 4 5-4 5 6 7 8 9 2 3 4 5 Noise Figure vs. Temperature NOISE FIGURE (db) 8 6 4 2 5 6 7 8 9 2 3-2
Output PdB vs. Temperature Output Psat vs. Temperature 25 25 amplifiers PdB (dbm) 23 2 9 7 Psat (dbm) 24 23 22 2 2 9 8 7 6 5 5 6 7 8 9 2 3 5 5 6 7 8 9 2 3 Output IP3 vs. Temperature IP3 (dbm) 4 35 3 25 5 6 7 8 9 2 3 Phase Noise at Pout = dbm @ GHz PHASE NOISE (dbc/hz) -4-45 -5-55 -6-65 -7-75 -8-85 -9-95 -2 2 3 4 5 FREQUENCY (Hz) Phase Noise at Pout = PdB @ GHz PHASE NOISE (dbc/hz) -4-45 -5-55 -6-65 -7-75 -8-85 -9-95 -2 2 3 4 5 FREQUENCY (Hz) Phase Noise at Pout = Psat @ GHz PHASE NOISE (dbc/hz) -4-45 -5-55 -6-65 -7-75 -8-85 -9-95 -2 2 3 4 5 FREQUENCY (Hz) - 3
Absolute Maximum Ratings Bias Supply Voltage (Vdc) +8V RF Input Power (RFIN) +5 dbm Continuous Pdiss (T = 85 C).62W Channel Temperature 35 C Thermal Resistance 2 C/W Storage Temperature -65 to +5 C Operating Temperature -55 to +85 C ELECTROSTATIC SENsiTIVE DEVICE OBserVE HANDliNG precautions Amplifiers Pin Descriptions Pin Number Function Description Interface Schematic RFIN & rf Ground rf input connector, coaxial female, field replaceable. This pin is AC coupled and matched to 5 Ohms. 2 RFOUT & rf Ground rf output connector, coaxial female, field replaceable. This pin is AC coupled and matched to 5 Ohms. 3 Vdc Power supply voltage for the amplifier. (+7V to +8V) 4 GND Power supply ground. - 4
Outline Drawing amplifiers Package Information Package Type C-6 Package Weight 7 gms [] [] ± gms Tolerance NOTes:. PACKAGE, LEADS, COVer MATerial: KOVar 2. FINisH: GOLD PLATE OVer NICKel PLATE. 3. ALL DimeNsiONS ARE IN INCHes [millimeters]. 4. TOleraNCes: 4..XX = ±.2 4.2.XXX = ±. 5. MARK LOT NUMBer ON.8 X.25 LABel WHere SHOWN, WITH.3 MIN TEXT HeiGHT. - 5
Notes: Amplifiers - 6