Curriculum Vitae PERSONAL INFORMATION Mohammad Azeem 57- I Block, Muneer Apartments, Near Badi Masjid, Sir Syed Nagar, Aligarh, 202002, +91-9058819938 ask2azeem@gmail.com https://www.linkedin.com/in/azeemmohammad Skype Name: mohammad.azeem111 Google hangout: ask2azeem@gmail.com Gender Male Date of birth 21 April 1984 Nationality N JOB APPLIED FOR POSITION Assistant Professor in Mechanical Engineering (Machine Design) WORK EXPERIENCE Years of Teaching Experience Sept 2016 Present Five years (5 yrs.) experience of teaching undergraduate level in Mechanical Engineering Assistant Professor (Temporary), Faculty of Engineering Mechanics of Solids, Machine Design, Materials Science, Machinery Dynamics, Engineering Graphics Lab, Kinematics and Stress Analysis Lab, Manufacturing Process Lab 4 Aug 2014 31 May 2015 Guest Faculty, Faculty of Engineering Applied Mechanics, Mechanics of Solids, Machine Drawing & Computer Graphics Engineering Graphics Lab, Vibrations Lab, Machine Design Practice, Manufacturing Process Lab 25 Sept 2013 31 May 2014 Guest Faculty, Faculty of Engineering Machine Drawing & Computer Graphics, Machine Design I Engineering Graphics Lab, Machine Design Practice, Industrial Production Lab 22 Aug 2013 24 Sept 2013 Assistant Professor (Temporary), Faculty of Engineering Machine Drawing & Computer Graphics Engineering Graphics Lab
19 Aug 2011 30 Jun 2013 Assistant Professor Projects undertaken Mechanical Engineering Department at Vivekananda College of Technology & Management (Aligarh), affiliated from UPTU (Lucknow) & Recognized by AICTE (New Delhi-India) Machine Design, Non-Conventional Energy Resources, Engineering Graphics Lab, Automobile Lab, Machine Design Lab Study of Pressure Vessels Education Institute 10 Aug 2007 30 Jun 2008 Assistant Professor Mechanical Engineering Department at Indira Gandhi College of Management & Technology (Aligarh) Mechanics of Solids Education Institute EDUCATION AND TRAINING 2008 2011 Masters Degree in Mechanical Engineering (Machine Design) Full Time First Division 65.94% Advanced Mechanics of Solids, Advanced Design of Mechanical Systems, Mechanical Vibration, Experimental Stress Analysis, Numerical Techniques & Tensors, Mechanisms, Tribology, Theory of Plasticity etc. Aligarh Muslim University, 2003 2007 Bachelors Degree in Mechanical Engineering - Full Time First Division 67.8% Mechanics of Solids, Machine drawing, Theory & Design of Machines, Mechanical Vibrations, Heat Power Engg., Refrigeration and air conditioning, Automotive Engineering etc. Aligarh Muslim University, 2000 2003 Diploma in Mechanical Engineering - Full Time First Division with Hons. 79.55% Applied Thermodynamics, Heat Power Engg., Automobile Engg., Hydraulics & Hydraulic Machines, Production Technology, Refrigeration & air conditioning, Industrial Management, Machine drawing & design Aligarh Muslim University, 2000 High School - Full Time First Division 63.83% English, Hindi, Maths, Science, Social Science, Commerce /School St. Paul s School, Shahjahanpur - Page 2 / 5
DISSERTATION AND PROJECTS Dissertation (Masters Degree) 2011 Dynamic Response of Composite Beams at Medium Impact Velocity In this Dissertation, experiments had been carried out to depict the behaviour of Sandwich Beams impacted by a rigid blunt projectile. Sandwich beams with two different core materials i.e. fiberglass (GFRP) and fibreboard were fabricated and were transversely impacted by the projectile. The dynamic response of the sandwich beams is discussed and the deformation pattern is simulated using ABAQUS finite element software. Supervisor: Prof Raisuddin, Mechanical Engineering Department, Aligarh Muslim University, India Project (Master of Technology) 2010 Impact of Projectile on Metallic Beams and their Response The project covers the impact behaviour of ductile beams impacted by a projectile. The impact response of the beams is discussed and various parameters are plotted in MATLAB code. Project (Bachelor of Engineering) 2007 Study of Advanced Manufacturing Systems It involves the study of Advanced Techniques and Processes being used in the modern scenario of Manufacturing Systems. Project (Diploma in Engineering) 2003 An Insight into Manufacturing through CNC Machine The project involves the accessibility of Numeric Control Techniques in industries and the incorporation of high precision CNC machines using machine language code. PERSONAL SKILLS Mother tongue(s) Urdu Other language(s) UNDERSTANDING SPEAKING WRITING Listening Reading Spoken interaction Spoken production English C2 C2 C2 C2 C2 Hindi C2 C2 C2 C2 B2 Levels: A1/2: Basic user - B1/2: Independent user - C1/2 Proficient user Common European Framework of Reference for Languages Social & Communication skills Good communication skills gained through my experience as a Teacher. Team work in research lab with fellow partners Team member of College time table committee (ZHCET:2013-14) Good mediation/moderation capabilities Autonomous and Focused on reaching professional goals. Capable of developing work independently. Aptitude to work under encumbrance. Job-related skills Agile towards delivering lectures and conducting Labs of university engineering curriculum Skills acquired in the course of life and career European Union, 2002-2013 http://europass.cedefop.europa.eu Page 3 / 5
Computer skills Through personal learning and in-use training, I have developed the following computer skills: Programming: Matlab, CNC Machine language code Operating Systems: Microsoft Windows 95 8, Linux Office Automation: Adobe and Microsoft Office tools (Word, Excel and Power Point etc.) CAD/CAE: AutoCAD, NX-CAE, SolidWorks, Abaqus Other skills Reading: ardent reader of miscellaneous areas. Travelling: Like to travel frequently and make acquaintances different nationalities and cultures. Adaptability: Ability to adapt to diverse environments. Technical Skills Skilled in operation of mechanical equipment and machines. Very much accustomed with the Impact test laboratory Driving licence Light Vehicle licence Passport M 6873783 - Valid till 01/03/2025 Blood Group B+ ADDITIONAL INFORMATION Memberships Member of IAENG (International Association of Engineers) 2015 Associate member of IRED (Institute of Research Engineers and Doctors) 2015 Student member of ASME (American Society of Mechanical Engineers) during 2003-2004 Publications Medium Velocity Impact on Sandwich Beams, International Journal of Innovative Research in Advanced Engineering (IJIRAE), Volume 1 Issue 5 (June 2014), Pgs. 27-31, ISSN: 2349-2163 Impact of Double Nose Blunt Projectile on Ductile Target, Proceedings of ACMFMS 2012 Mechanics of Functional Materials and Structures, Pgs. 759-762, ISBN 978-81-8487-248-4. IIT-D, New Delhi, Impact of Projectile on Monolithic Metallic Beams, Proceedings of NCAME 2010, National Conference on Advances in Mechanical Engineering, Pgs. 229-234, ISBN 978-93-80697-33-8, University Polytechnic, AMU, Aligarh. Empirical Perforation Equation for Thin Aluminium Plates at Low Velocity Impact, Proceedings of NCAME 2010, National Conference on Advances in Mechanical Engineering, Pgs. 223-228, ISBN 978-93-80697-33-8, University Polytechnic, AMU, Aligarh. Numerical Simulation of Ogive Nose Projectile Impact on aluminium plates of Different Thicknesses, Proceedings of NCAME 2010, National Conference on Advances in Mechanical Engineering, Pgs. 255-259, ISBN 978-93-80697-33-8, University Polytechnic, AMU, Aligarh. Effect of Adhesive Thickness in Sandwich Beams under Impact loading (under process) Post Failure Rotation of Sandwich Beams upon Impact (under process) Comparative Study of Relevance of Different Cores in Sandwich Beams under Projectile Impact (under process) Page 4 / 5
Conferences & Training Participated in one week FDP and finishing school on Computational Methods in Engineering Mechanics, 3 rd 7 th Oct 2016 Attended Four days Training Programme on Solid Works (3D foundation course), ZHCET, 23rd Aug (2014) Completed a one week training program on NX-Essentials for NX Designers + NX CAE conducted by SIEMENS on 30th Sep to 6th Oct (2013) Participated in the National Conference on advances in Mechanical Engineering (NCAME-10) during 27th to 28th Nov (2010) Participated in one day training programme on Entrepreneurship development on 7th Oct at NSIC, Aligarh (2002) Workshops & Seminars Coordinated workshop on Design and Fabrication to Model Ultra-light Aircrafts as a Future Aspect of Innovation in Aviation conducted by New Addition UAV Solution Pvt Ltd on 17 th Apr at University Polytechnic, Aligarh Muslim University (2017) Attended an International Workshop by Department of Mechanical Engineering & Korea Institute of Industrial Technology (KITECH), South Korea on Fluid Mechanics and its Applications, 29 th Mar (2017) under TEQIP Participated Workshop UP startup Conclave - Entrepreneurship & Innovation in Academic institutions Challenges and Opportunities on 18 th 19 th March at Indian institute of Technology Kanpur (2017) under TEQIP) Participated in National Workshop on Condition Monitoring of Machines (NWCMM -2016) 19 th - 20 th Oct. at Zakir Husain College of Engineering & Technology AMU Aligarh. Participated Workshop on Biomedical Engineering & its Recent Trends (BERT 2014) on 11th Feb at ZHCET, AMU, Aligarh (2014) Participated Seminar on various topics of Civil Engineering, organized by Civil Engineering Dept., at Vivekananda College of Technology & Management, Aligarh on 2nd May (2012) Participated in two days workshop on MATLAB at ZHCET AMU, Aligarh (2010) Participated in Rendezvous Simulation by MATLAB event at AMU, conducted by freshersworld on 7th Nov (2010) Won Prizes in Sports and Cultural events at school level. Mohammad Azeem European Union, 2002-2013 http://europass.cedefop.europa.eu Page 5 / 5