Oklahoma State University (OSU) Dec M.S. in Mechanical & Aerospace Engineering GPA: 4.00/4.00
|
|
- Gloria Crystal Kennedy
- 5 years ago
- Views:
Transcription
1 Reza Ziazi Experimental Fluid Mechanics Research Lab, Rogers 344 Mechanical, Industrial, and Manufacturing Engineering Oregon State University Corvallis, OR Phone: (541) LinkedIn: EDUCATION Oregon State University (OSU) Instructor/Ph.D. Candidate in Mechanical Engineering Dissertation Title: Turbulent flow in porous media using the method of particle image velocimetry Expected. 201 GPA: 3.7/4.00 Oklahoma State University (OSU) Dec M.S. in Mechanical & Aerospace Engineering GPA: 4.00/4.00 Thesis Title: Computational approaches to modeling Near-Infrared phenomena in slurries with arbitrary solids concentration profiles Amirkabir University of Technology (Tehran Polytechnic) May 2009 B.S. in Aerospace Engineering Major GPA: 3.42/4.00 Thesis Title: Developing a Software for computing performance, and Stability of unmanned helicopters using MATLAB ACADEMIC ACTIVITIES PhD Projects Studied and measured the geometry of a randomly packed porous system consisting of homogeneous glass beads using particle image velocimetry technique Aug Studying and computing the flow through a cavity using direct numerical simulation of the flow as student project in Computational Fluid Dynamics course Winter 2015 Design and implementing the three component particle image velocimetry technique for measuring the third component of the velocity in the porous system of homogeneous glass spheres March 2015 Calculating and measuring the seeding particles through the channel using the method introduced by Adrian and Westerweel Feb 2015 Measuring the flow the channel using the method of particle image velocimetry by implementing the proper seeding density Nov 2015 Calibrating the flow rate through a flowmeter in the experimental loop to measure the entrance velocity to the test section Dec Design and implementing a pressure drop facility in the experimental loop to measure difference in pressure using barometers and pressure transducers Dec Design and building the experimental loop for measuring the velocity field through porous system of glass spheres using the particle image velocimetry Aug Applying the time domain analysis to study the turbulence in porous media using the rigorous statistical approaches Jun. Studying different measurement techniques in the fluid mechanics March Studied, analyzed, and computed the lubrication theory and the streamlinevorticity approach in numerical analysis course Dec. 2013
2 Master s Projects Studied, analyzed, and computed different optical techniques to determine the depth of penetration of light in slurry Sep Implemented the results of K-Epsilon model of a horizontal pipe into the optical theory of representative layer to model Near-Infrared light inside a slurry pipe Summer 2012 Conducted the research on the optical method of representative layer to model light transport in slurry pipe using CFD results derived from ANSYS Fluent May 2012 Developed a robust algorithm to utilize CFD data and implement it into NIR optical models Mar Presented technical reports to a cross-functional team from EI DuPont Inc, and Universities of Tennessee and East Carolina Dec to Jun Unsteady Aerodynamics project on review, analysis, and modeling of the unsteady behavior of a thin rigid airfoil in pitch/plunge motions Spring 2012 A Multiphase Flow course project on studying recent optical diagnostics methods for characterizing two-phase flows Nov Developed a program to model Near-Infrared light in a slurry using continuum theories of diffuse reflectance Oct Designed the mesh geometry and computed the flow of a free jet out of a pipe using meshing with ICEM CFD and solving with CFX solver Aug A Computational fluid dynamics-cfd project of simulating multiphase flow in a pipe with ANSYS-Fluent Jul. 2011; A Computational fluid dynamics-cfd project of simulating two-phase flow in a circular turbulent jet using ANSYS-Fluent May 2011; Turbulent Fluid Dynamic project on comparing different experimental and computational models to estimate the fluid flow in horizontal pipelines Apr Computational Fluid Dynamics projects Spring 2011 CFD simulation of the ballistic motion of a soccer ball CFD calculation of a viscous fluid flow through a sudden expansion Numerical solution algorithm for transient fluid flows in a cavity (SOLA) Numerical solution algorithm for 3-D transient free jet with wall obstruction using Fortran, Visual Basic, and ANSYS Mar Aerodynamic computations and simulation of optimized version of PARVAN I (unmanned helicopter) using Fortran and ANSYS Jan Bachelor s Projects Organized, designed, and conducted the ground tests and the flight test of the remotely piloted helicopter (PARVAN I Project) Collaborated in the project for design and manufacturing of a Remotely Piloted Helicopter (RPH) PARVAN I Project Sep to May 2009 Designed main rotor blade, fuselage, empennage, tail boom, and landing gear of the RPH using Solid Works and CATIA Jun. to Dec Directed the aerodynamics and flight dynamic division for design and manufacturing a RPH (PARVAN I Project 2008 to 2010 Conducted an experiment to measure the wake of the main rotor inside the Ground Effect (IGE) Oct
3 Studied the operational engines for UAVs and derived the performance charts of OS-91 SZH engine a model helicopter engine by designing and manufacturing a Test Stand Sep. 2008; Conducted the test for measuring tail rotor aerodynamic forces and moments of PARVAN for comparing theoretical aerodynamic calculations to actual measurements of power in blades with low solidity ratio and for investigating the net power dissipation in the system Aug Conducted a test for measuring rotor flapping angles of a remotely piloted helicopter as a parameter estimation used in detail design of such aircraft wing & fuselage lab, aerospace eng. department Jul Participated in the academy of "Aircraft Design I,II" as the most respected Team in designing the best configuration with CAD software programs Sep to Jun Supervised and conducted the test of measuring main rotor thrust and torque of the designed unmanned helicopter by manufacturing a test stand Apr Studied of Manufacturing processes of UAVs and implementing them in construction of RPH as well as Manufacturing most of the critical parts using the Department of Aerospace Eng. facilities Jan. to Jun. 2008; Conceptual and detail design of a small unmanned helicopter (Parvan), UAV Lab of Aerospace Eng. Department Jul. to Dec. 2007; Data gathering, statistical and feasibility studies of operational unmanned helicopters as a preliminary design stage Jan. to Jun. 2007; PUBLICATIONS Ziazi, R., Mohammadi, K., & Goudarzi, N. (2017, June). Techno-Economic Assessment of Utilizing Wind Energy for Hydrogen Production Through Electrolysis. In ASME 2017 Power Conference Joint With ICOPE-17 collocated with the ASME th International Conference on Energy Sustainability, (pp. V002T09A019- V002T09A019). American Society of Mechanical Engineers. Wood, B. D., Apte, S. V., Liburdy, J. A., Ziazi, R. M., He, X., Finn, J. R., & Patil, V. A. (2015). A comparison of measured and modeled velocity fields for a laminar flow in a porous medium. Advances in Water Resources, 85, Patil, Vishal, et al. "Experimental Versus Computational Methods in the Study of Flow in Porous Media." ASME 4th Joint US-European Fluids Engineering Division Summer Meeting collocated with the ASME 12th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers,. Ziazi, R. M., Ravikumar, S. K., Chambers, F. W., Application of optical theories to model near-infrared phenomena in slurries with arbitrary solids concentration profiles, Under Submission, ASME Fluids Engineering Conference, 2013 Ravikumar, S. K., Ziazi, R. M., Chambers, F. W.; Computational prediction of particle-laden slurry flow in a vertical pipe using Reynolds stress model, Accepted, ASME Fluids Engineering Conference, 2013 Kermanshahi, F., Ziazi, R. M., Mortazavi; Design, Optimization and Building Flight Model of an Operational Unmanned Helicopter, IEEE Aerospace Conference, 10 pp.,2010 Ziazi, R. M., Sajedi, M. S., Modeling of a Remotely Piloted Helicopter Based on Stability Derivatives, Draft Submission, IEEE Aerospace Conference, 2010
4 PRESENTATIONS Ziazi, R., & Liburdy, J. (2016, November). The transition to unsteady flow regime (Repore= 100 to 300) in a randomly packed porous media using particle image velocimetry. In APS Meeting Abstracts. Ziazi, R. M., He, X., Finn, J., Patil, V. A., Apte, S., Liburdy, J., & Wood, B. D. Porous Media Flows; Experiments vs. Computations. Poster session presented at: Oregon State Graduate Research Expo, 2015 March 1, Portland, Oregon Ziazi, R. (2015, December). Particle image velocimetry measurement of steady, transitional, and turbulent flow in a randomly packed porous media. In 2015 AGU Fall Meeting. Agu. Ziazi, R. M., He, X., Finn, J., Patil, V. A., Apte, S., Liburdy, J., & Wood, B. D. (, December). Comparison of PIV measurement and direct numerical simulation of low Reynolds number flow in porous media. In AGU Fall Meeting Abstracts (Vol. 1, p. 07). INTERESTS Data analysis Porous media fluids Computational fluid dynamics Turbulence modeling Experimental and theoretical aerodynamics Unsteady aerodynamics Mathematical modeling Optical diagnostics and modeling of multiphase flows COURSE work Turbulent Fluid Dynamics Computational Fluid Dynamics Advanced Aerodynamics Low Speed Aerodynamics Aircraft Design Viscous Fluid Dynamics Heat Transfer Unsteady Aerodynamics Fluid Mechanics Flight Mechanics I & II Multiphase Flows Compressible Aerodynamics Finite Element Analysis Complex Variables Aircraft Stability and Control PROFESSIONAL EXPERIENCE Instructor Oregon State University Jun 2017 Aug 2018 Redesigned and taught Dynamics (ENGR 212) Teaching Assistant Oregon State University March 2016 Jun 2017 Teaching assistant for Physics, Renewanle Energies, to undergraduate students Research Assistant Oregon State University Sep 2013 Jun 2016 Working and doing research in the area of turbulence in porous media using optical diagnostic technique of particle image velocimetry Project Engineer Intern Shahang Vazin Crane Co., Tehran Jun Aug (Manufacturer of ceiling cranes) Designed and optimized a crane bridge using ANSYS Mechanical APDL Compiled a quality certificate for maintenance and operating the crane hoist Calculated and analyzed the structural stress model of the crane bridge using Finite Element with ANSYS Improved the 3-D sketch and 2-D industrial plan of the hoist and crane assembly using AutoCad Teaching Assistant Amirkabir Univerristy of Technology Aug Jun Teaching Calculus 1&2, Differential equations, Trigonometry, Geometry, and Physics 1 Project Intern Aviation Industries Organization, Iran May 2008 Aug (Manufacturer of training aircrafts) Collaborated with a team of aerospace engineers for design a flight simulator program. Performed a CFD simulation for the aircraft wing to achieve the aerodynamic forces. Designed the detailed model of Dorna D-139 aircraft in CATIA to optimize the configuration and landing gear
5 COMPUTER SKILLS CFD Software Programs: Dynamic and Structural Data Acquisition and analysis: Programming: CAD/CAM Software Programs: ANSYS (Fluent, CFX, ICEM CFD, Thermal), ABAQUS ANSYS (FEA, Mechanical APDL), MSC ADAMS (multibody dynamics) LabView, Techplot FORTRAN, C/C++, MATLAB, Visual Basic, Q-Basic MAPLE, MATHEMATICA SolidWorks, AutoCAD, CATIA (Master in design processes and manufacturing skills, and mechanisms simulation - part & assembly design) Operating Systems and Apps: HONORS & AWARDS Windows, MAC, LINUX, Microsoft Office 2007/2010, MS Project, Photoshop Won the International Student Scholarship at Oregon State University Jan Honored in the Honor Society of Phi Kappa Phi Nov Honored in Golden Key International Honor Society Dec Granted OSU Graduate research assistantship Dec Awarded as the 10% students in Amirkabir University of Technology Jan Research grant of $5000 for Design and Manufacturing a Remotely Piloted Helicopter Sep Awarded certificates for the following software programs: ANSYS, ADAMS, CATIA, MATLAB 2006 to 2009 Ranked 193th among 400,000 high-school students in the country-wide university admission examination Jun AFFILIATIONS Member, American Institute of Aeronautics and Astronautics (AIAA) Sep to present Member, American Society of Mechanical Engineers (ASME) Sep Member, International Automation Society (IAS) Sep CERTIFICATES ANSYS A Certificate of an educational course, Scientific Association, Department of Mechanical Engineering, Amirkabir University of Technology May 2010 Design and Manufacturing of a Small Unmanned Helicopter (PARVAN) A Project Certificate defined by the Center of Excellence in Aerospace Engineering May 2009 Application of Artificial Intelligence Based Algorithms in Modeling and Optimization of Engineering Problems Using MATLAB A Certificate of an educational course, Scientific Association, Department of Civil and Environmental Engineering, Amirkabir University of Technology Spring 2009 MATLAB A Certificate of an educational course, Scientific Faculty, Department of Aerospace Engineering, Amirkabir University of Technology Apr CATIA A Certificate of an educational course, Scientific Faculty, Department of Aerospace Engineering, Amirkabir University of Technology Sep ADAMS A Certificate during Vibration course, Scientific Faculty, Department of Aerospace Engineering, Amirkabir University of Technology Dec COMMUNITY & CAMPUS INVOLVEMENT Steward in Coalition of Graduate Employees at Oregon State University Spring 2018 to present Member of OSU Photography Society to present Member of OSU Hydrophyles outdoor activity group 2015 to present Member of Iranian Student Association 2016 to present Participated in the International Student Olympics Sep Worked as a soccer referee for campus recreation department Sep 2012 Tutored many freshmen students in mathematics and physics Fall 2011
Samane Zeyghami. 109 Carrollton Terrace, Apt 3, Charlottesville, VA, PHONE: (937)
Samane Zeyghami 109 Carrollton Terrace, Apt 3, Charlottesville, VA, 22903. PHONE: (937)668-5613. E-MAIL: sz3ah@virginia.edu EDUCATION Doctor of Philosophy, 2016 Charlottesville, VA Dissertation: Wing in
More informationCURRICULUM VITAE TARIQ T. DARABSEH
CURRICULUM VITAE TARIQ T. DARABSEH Departments of Mechanical Engineering United Arab Emirates University, Al Ain-UAE Mobile: (+971)563403902 E-mail: tdarabseh@uaeu.ac.ae EDUCATION Ph.D., Mechanical Engineering,
More informationSven Schmitz. Assistant Professor
Assistant Professor Department of Aerospace Engineering The Pennsylvania State University, University Park, PA 16802 phone: 814-863-0778 email: sus52@engr.psu.edu EDUCATION Ph.D., Mechanical and Aeronautical
More informationBAXTER O'TULLE 132 Horace Ave Gordonville, KY (555)
BAXTER O'TULLE 132 Horace Ave Gordonville, KY 93555 (555) 555-2938 botulle@emailplace.com RESEARCH INTERESTS Automation Distribute Systems Control Decentralization Control Mechantronics and Artificial
More informationNASA Fundamental Aeronautics Program Jay Dryer Director, Fundamental Aeronautics Program Aeronautics Research Mission Directorate
National Aeronautics and Space Administration NASA Fundamental Aeronautics Program Jay Dryer Director, Fundamental Aeronautics Program Aeronautics Research Mission Directorate www.nasa.gov July 2012 NASA
More informationSaeed Karimian Aliabadi
Resume In the Name of God Saeed Karimian Aliabadi Address: Eng. Dep., Room 6/211, Tarbiat Modares University, Tehran, Iran Post Box: 14115-111 Tel: 0098-21-82884933 Mobile: 0098-912-2786026 E-mail: Karimian@modares.ac.ir
More informationFaculty Profile. Mechanical Engineering. Thermal Enginnering. Teaching: 17 years
Faculty Profile Name of Faculty Department Qualification Designation Area of specialization Dr. B.S. ANIL KUMAR Mechanical Engineering M.Tech., Ph.D. Professor Thermal Enginnering Date of Joining BNMIT
More informationThe Active Flutter Suppression (AFS) Technology Evaluation Project
1 The Active Flutter Suppression (AFS) Technology Evaluation Project Eli Livne, Ph.D. The William E. Boeing Department of Aeronautics and Astronautics University of Washington, Seattle, WA eli@aa.washington.edu
More information12225 N Woodcrest Drive, Apt # Dunlap, IL Phone:
SRINIVASULU MALAGARI 12225 N Woodcrest Drive, Apt # 106 Email: malagari_srinivasulu@cat.com Dunlap, IL- 61525 Phone: 316-260-0457 PROFESSIONAL SUMMARY: Strong understanding of the Diesel Engine aftertreatment
More informationGender Male Date of birth 21 April 1984 Nationality INDIAN. Assistant Professor in Mechanical Engineering (Machine Design)
Curriculum Vitae PERSONAL INFORMATION Mohammad Azeem 57- I Block, Muneer Apartments, Near Badi Masjid, Sir Syed Nagar, Aligarh, 202002, +91-9058819938 ask2azeem@gmail.com https://www.linkedin.com/in/azeemmohammad
More informationParticle Image Velocimetry
Markus Raffel Christian E. Willert Steve T. Wereley Jiirgen Kompenhans Particle Image Velocimetry A Practical Guide Second Edition With 288 Figures and 42 Tables < J Springer Contents Preface V 1 Introduction
More informationMS-357, Lockheed-Martin Aeronautical Patent Collection
Collection Number: MS-357 MS-357, Lockheed-Martin Aeronautical Patent Collection Title: Lockheed-Martin Aeronautical Patent Collection Dates: 1844-1988 Creator: Lockheed Martin Corporation Summary/Abstract:
More informationEuropass curriculum vitae. Academic Profile. Personal information. Education. Work Experience
Europass curriculum vitae Academic Profile Personal information Surname / First name Omirou Sotiris Telephones (+357) 22345158 ext 131 Fax (+357) 22438234 E-mail eng.os@fit.ac.cy Website http://staff.fit.ac.cy/eng.os
More informationMohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the state of Ohio OBJECTIVE EDUCATION RELEVANT COURSES PUBLICATIONS
Mohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the state of Ohio Email: mhaiba@yahoo.com OBJECTIVE To secure a challenging Academic / Technical position in the field of Mechanical Engineering
More informationINFLUENCE OF MEMBRANE AMPLITUDE AND FORCING FREQUENCY ON SYNTHETIC JET VELOCITY
TASKQUARTERLYvol.19,No2,2015,pp.111 120 INFLUENCE OF MEMBRANE AMPLITUDE AND FORCING FREQUENCY ON SYNTHETIC JET VELOCITY MARCIN KUROWSKI AND PIOTR DOERFFER Institute of Fluid-Flow Machinery, Polish Academy
More informationArdeshir Raihanian Mashhadi
Ardeshir Raihanian Mashhadi Contact Information Education 437 Bell Hall, Cell: (+1) (716) 861-0604 Buffalo, NY 14260 E-mail:ardeshir@buffalo.edu University at Buffalo, The State University of New York,
More informationMultiphase Pipe Flow - a key technology for oil and gas industry - Murat Tutkun Institute for Energy Technology (IFE) and University of Oslo
Multiphase Pipe Flow - a key technology for oil and gas industry - Murat Tutkun Institute for Energy Technology (IFE) and University of Oslo 1 Institute for Energy Technology www.ife.no Norway s largest
More informationRecreation Facility Hours
NORMAL HOURS Recreation Facility Hours August 1, 2016 July 31, 2017 Last Revised: July 29, 2016 Effective Dates 2016: AUG 23 31, SEP 1 2, SEP 6 16, SEP 18 23, SEP 25 30, OCT 1 7, OCT 9 18, OCT 24 30, NOV
More informationCefiro: An Aircraft Design Project in the University of Seville
Cefiro: An Aircraft Design Project in the University of Seville Carlos Bernal Ortega, Andrés Fernández Lucena, Pedro López Teruel, Adrián Martín Cañal, Daniel Pérez Alcaraz, Francisco Samblás Carrasco
More informationFollow this and additional works at:
Marshall University Marshall Digital Scholar Recommendations Faculty Senate 5-11-2015 SR-14-15-44 CC Marshall University Follow this and additional works at: http://mds.marshall.edu/fs_recommendations
More informationEBRAHIM GHAHRAMANI. Education. Research Experience
Contact:(+46)72-973-4385, ebrahim.ghahramani@chalmers.se https://se.linkedin.com/in/ebrahim-ghahramani-64781683 Education Ph.D., Mechanics and Maritime Sciences, Chalmers University of Technology, Sweden
More informationApplication of Artificial Neural Network for the Prediction of Aerodynamic Coefficients of a Plunging Airfoil
International Journal of Science and Engineering Investigations vol 1, issue 1, February 212 Application of Artificial Neural Network for the Prediction of Aerodynamic Coefficients of a Plunging Airfoil
More informationDevelopment of Hybrid Flight Simulator with Multi Degree-of-Freedom Robot
Development of Hybrid Flight Simulator with Multi Degree-of-Freedom Robot Kakizaki Kohei, Nakajima Ryota, Tsukabe Naoki Department of Aerospace Engineering Department of Mechanical System Design Engineering
More informationAssistant Professor, June 2008 Sep The Hashemite University, Jordan
EDUCATION Suleiman Obeidat, Ph.D. Department of Engineering Technology & Industrial Distribution Manufacturing & Mechanical Engineering Technology Program Texas A&M University, College Station, TX 77843
More informationStructural Health Evaluation of Composite Materials using Lamb Wave Methods
Structural Health Evaluation of Composite Materials using Lamb Wave Methods NRO APD BAA for 2002 Kick-off Meeting June 27 th, 2002 Technology Laboratory for Advanced Composites Department of Aeronautics
More informationCADCAM DEPARTMENT NSQF COMPLIANCE COURSES
CADCAM DEPARTMENT NSQF COMPLIANCE COURSES Course Name: ADVANCE CERTIFICATE COURSE IN CNC MACHINING Duration: 1560 Hrs. /1 year NSQF Level: 5 Course content: CNC Programming & CNC Machining Engineering
More informationMohammad A. Gharaibeh Curriculum Vitae October 2018
Mohammad A. Gharaibeh Assistant Professor Department of Mechanical Engineering Faculty of Engineering The Hashemite University Zarqa, 13115, Jordan Phone (Office): + 962 (05) 390-3333 Ext. 4894 Webpage:
More informationAEROSPACE ENGINEERING
King Fahd University of Petroleum and Minerals Graduate Bulletin Aerospace Engineering 1426 H 2005 G AEROSPACE ENGINEERING Chairman Prof. Ahmed Z. Al-Garni Assistant Professors Dr. Abdullah M. Al-Garni
More informationIIT Madras - Faculty Recruitment Areas - (Summer 2018)
IIT Madras - Faculty Recruitment Areas - (Summer 2018) S No Department Post Specialization Areas 1 Aerospace Engineering Only candidates with a clear focus on one or more of the specified areas will be
More informationPIV Measurements of Flow immediately above Woven Fabrics
PIV Measurements of Flow immediately above Woven Fabrics Haiya Peng Master of Applied Science in Mechanical Engineering University of British Columbia May 4, 2011 PaperCon 2011 Page 2158 Introduction Paper
More informationNSQF COMPLIANCE COURSES
NSQF COMPLIANCE COURSES Course Name: ADVANCE CERTIFICATE COURSE IN CNC MACHINING Duration: 1560 Hrs. /1 year NSQF Level: 5 Course content: CNC Programming & CNC Machining Engineering Metrology And Quality
More informationInvestigations of spray painting processes using an airless spray gun
ILASS Europe 2011, 24th European Conference on Liquid Atomization and Spray Systems, Estoril, Portugal, September 2011 Investigations of spray painting processes using an airless spray gun Q. Ye 1, B.
More informationRomi d tr neis L y Bag o o wuedras, so H x ead Interim De De c p embe artm re 2010 nt H ead DEPARTMENT OVERVIEW 2012
DEPARTMENT OVERVIEW Rodney Dimitris Bowersox Lagoudas, Head Interim Department December 2010 Head 2012 Our Main Strengths: On the Cutting Edge of Aerospace Engineering Three strong academic disciplines
More informationDepartment of. Mechanical & Aerospace. Engineering. Developing. Leaders of Innovation
Department of Mechanical & Aerospace Engineering Developing Leaders of Innovation Emphasizing both a tradition of excellence and a pioneering spirit of entrepreneurship in education and research, the U.Va.
More informationYashovardhan Sushil Chati, PhD
Yashovardhan Sushil Chati, PhD March 2018 Cambridge, MA-02139 Email: yschati@mit.edu LinkedIn: https://www.linkedin.com/in/yashovardhan-chati/ Personal Website: web.mit.edu/yschati/www Google Scholar:
More informationBS-Electrical Engineering (Spring 1985) University of Oklahoma, Norman, OK
101 Oklahoma Drive Portales, NM 88130 Office: (575) 562-2073 Home: (575) 356-4467 Cell: 575-825-0199 E-mail: hamid.allamehzadeh@enmu.edu EDUCATION: PH.D. - ELECTRICAL ENGINEERING (Spring 1996) Dissertation:
More informationCurriculum Vitae. Abd El Khalick Mohammad, 17 Nov Doctor of Engineering H-index: 6 and Citation: 107 (Google Scholar) 1.
Curriculum Vitae Abd El Khalick Mohammad, 17 Nov. 1984 Doctor of Engineering H-index: 6 and Citation: 107 (Google Scholar) Previous position: Research Fellow Centre for E-City EXQUISITUS, Electrical and
More informationM.Tech in Machine Design
M.Tech in Machine Design Department of Mechanical Engineering The National Institute of Engineering Mysore-08 (Established in 1946) A Heritage of Excellence NIE Premier educational institutions in India
More informationREPORT DOCUMENTATION PAGE
REPORT DOCUMENTATION PAGE Form Approved OMB NO. 0704-0188 The public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instructions,
More informationPh.D : Technology & Science Fellowship available for meritorious Full-Time, candidates GATE / NET qualified Rs.
QS Ranking NAAC Accredited A Emerging Researchers with creative dynamism for promising innovations are invited to join Hindustan, a blossoming Deemed University with a rich heritage and commitment for
More informationAn investigation of the fluid-structure interaction in an oscillating-wing micro-hydropower generator
An investigation of the fluid-structure interaction in an oscillating-wing micro-hydropower generator K.D. Jones, K. Lindsey & M.F. Platzer Department of Aeronautics & Astronautics, Naval Postgraduate
More informationInternational students from non-english speaking backgrounds will be required to take an English language communications course.
Master of Engineering (ME) 2015 These Program Rules should be read in conjunction with the University's policies (http://www.adelaide.edu.au/policies). Overview The Master of Engineering is comprised of
More informationWorkshop: Examining the Science & Technology Enterprise in Naval Engineering
Transportation Research Board - National Academy of Sciences Committee on Naval Engineering in the 21 st Century Workshop: Examining the Science & Technology Enterprise in Naval Engineering January 13-14,
More informationA Hybrid Trailing Edge Control Surface Concept
Pınar ARSLAN, Uğur KALKAN, Harun TIRAŞ, İlhan Ozan TUNÇÖZ, Yosheph YANG, Ercan GÜRSES, Melin ŞAHİN, Serkan ÖZGEN, Yavuz YAMAN Department of Aerospace Enginnering, Middle East Technical University Ankara,
More informationInstitut Supérieur de l Aéronautique et de l Espace. Master of Science in Aerospace Engineering ISAE-SUPAERO
Institut Supérieur de l Aéronautique et de l Espace Master of Science in Aerospace Engineering ISAE-SUPAERO 1 Before ISAE ISAE ISAE+2 Undergraduate studies abroad MSc : 1st year MSc : 2 nd year Semester
More informationKPI is one of the oldest and biggest technical universities in Ukraine. It was founded in 1898.
National Technical University of Ukraine Kyiv Polytechnic Institute KPI is one of the oldest and biggest technical universities in Ukraine. It was founded in 1898. OVERVIEW 39 bachelor s, 92 master s,
More informationLiquid & Gas Flowmetering
Course Title Liquid & Gas Flowmetering COURSE OVERVIEW IE250 Liquid & Gas Flowmetering Course Date/Venue Session 1: October 25-29, 2015/Shahama Meeting Room, Crowne Plaza Hotel, Abu Dhabi, UAE Session
More informationWind load testing methodology for measuring drag coefficient of aerodynamically efficient base station antenna profiles
load testing methodology for measuring drag coefficient of aerodynamically efficient base station antenna profiles Abstract On a cellular tower, the base station antennas account for a significant portion
More informationExpert Training on CAD/CAE/CAM/PPM software tools
Expert Training on CAD/CAE/CAM/PPM software tools Bharatiya Vidya Bhavan s Sardar Patel College of Engineering (S.P.C.E) (Government Aided Autonomous Institute) www.spce.ac.in CAD/CAE/CAM/PPM Training
More informationFluid-Structure Interaction (FSI) with System Coupling
Fluid-Structure Interaction (FSI) with System Coupling Dr Jasper Kidger ANSYS UK Ltd. 1 System Coupling (FSI) Introduction 2 Outline Review of pre-r14 Solutions for ANSYS Fluent Motivation for System Coupling
More informationFOREBODY VORTEX CONTROL ON HIGH PERFORMANCE AIRCRAFT USING PWM- CONTROLLED PLASMA ACTUATORS
26 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES FOREBODY VORTEX CONTROL ON HIGH PERFORMANCE AIRCRAFT USING PWM- CONTROLLED PLASMA ACTUATORS Takashi Matsuno*, Hiromitsu Kawazoe*, Robert C. Nelson**,
More informationCurriculum Vitae IMAN KHALAJI
Curriculum Vitae IMAN KHALAJI Contact information Mailing address: Canadian Surgical Technologies and Advanced Robotics (CSTAR) 339 Windermere Road London, Ontario, Canada N6A 5A5 Tel.: (519) 661-2111
More informationCOMPUTER APPLICATIONS
2 ESOURCE COMPUTER APPLICATIONS Chapra Power Programming with VBA/Excel, 0-13-047377-4 If You've Never Programmed Before 7 ES1101 Overview of VBA for Excel 12 ES1102 Recording Macros 11 ES1103 Customized
More informationDesign of a Flight Stabilizer System and Automatic Control Using HIL Test Platform
Design of a Flight Stabilizer System and Automatic Control Using HIL Test Platform Şeyma Akyürek, Gizem Sezin Özden, Emre Atlas, and Coşku Kasnakoğlu Electrical & Electronics Engineering, TOBB University
More informationThe Critical Need for Increased IT Education in Aerospace Undergraduate and Graduate Programs
The Critical Need for Increased IT Education in Aerospace Undergraduate and Graduate Programs Lyle N. Long Distinguished Professor of Aerospace Engineering The Pennsylvania State University Presented at
More informationShuguang Huang, Ph.D Research Assistant Professor Department of Mechanical Engineering Marquette University Milwaukee, WI
Shuguang Huang, Ph.D Research Assistant Professor Department of Mechanical Engineering Marquette University Milwaukee, WI 53201 huangs@marquette.edu RESEARCH INTEREST: Dynamic systems. Analysis and physical
More informationJoint Collaborative Project. between. China Academy of Aerospace Aerodynamics (China) and University of Southampton (UK)
Joint Collaborative Project between China Academy of Aerospace Aerodynamics (China) and University of Southampton (UK) ~ PhD Project on Performance Adaptive Aeroelastic Wing ~ 1. Abstract The reason for
More informationDec Next consortium meeting on March 17, 2015 at Ohio State Univ., Columbus, Ohio.
Dec.2014 Research Scope and Objective Current Research & Development Activities Recent Publications (2012 2014) Graduate Student Profiles Future HGSim Functionalities Contact Information Caterpillar Dana
More informationA i r c r a f t C o m p o n e n t s a n d F u n c t i o n s ( 1 1 A )
8 5 4 5 A i r c r a f t C o m p o n e n t s a n d F u n c t i o n s ( 1 1 A ) 30S/30E/30M An Aviation and Aerospace Technologies Course 8 5 4 5 : A i r c r a f t C o m p o n e n t s a n d F u n c t i
More informationINTRODUCTION. Flying freely. Aircraft that do not require a runway. Unconventionally shaped VTOL flying robots
R E S E A R C H INTRODUCTION Flying freely Aircraft that do not require a runway A runway is generally required for aircraft to take off or land. In contrast, vertical take-off and landing (VTOL) aircraft
More informationDetermining the Fatigue Life of Aero-Engine Blades
w w w. s c i t e k c o n s u l t a n t s. c o. u k Determining the Fatigue Life of Aero-Engine Blades SCITEK Consultants Ltd Martin Haste, Florian Faurillou, Jon Bates, Marios S Christodoulou 4 th November
More informationUniversity of Massachusetts Amherst Department of Civil and Environmental Engineering. Newton, MA Transportation Engineer Nov Aug 2007
Song Gao 214C Marston Hall 130 Natural Resources Road Amherst, MA 01003-0724 Tel: (413) 545-2688 Fax: (413) 545-9569 E-mail: songgao@ecs.umass.edu Education Massachusetts Institute of Technology Cambridge,
More informationINTERNATIONAL EDUCATION
INTERNATIONAL EDUCATION 1. USST FACTS AND FOCUS University of Shanghai for Science and Technology is an engineering-based municipal key university with multidisciplinary blend of science, management, economics
More informationElectrical and Automation Engineering, Fall 2018 Spring 2019, modules and courses inside modules.
Electrical and Automation Engineering, Fall 2018 Spring 2019, modules and courses inside modules. Period 1: 27.8.2018 26.10.2018 MODULE INTRODUCTION TO AUTOMATION ENGINEERING This module introduces the
More informationTAU Experiences with Detached-Eddy Simulations
TAU Experiences with Detached-Eddy Simulations Herbert Rieger & Stefan Leicher EADS Deutschland GmbH Military Aircraft Flight Physics Department Ottobrunn, Germany Outline The Typical Design Problem of
More informationBridge Condition Assessment Using Remote Sensors
A Summary of the 4th Quarterly Report for the Technical Activities Council Bridge Condition Assessment Using Remote Sensors Michigan Technological University USDOT Cooperative Agreement No. DTOS59-10-H-00001
More informationhttps://www.linkedin.com/pub/antonio-posa/b8/105/383
First name Last name LinkedIn Profile Antonio Posa https://www.linkedin.com/pub/antonio-posa/b8/105/383 Education Ph.D. in Fluid Machinery Engineering, Department of Mechanical and Management Engineering,
More informationZHAOXIAN ZHOU. Curriculum Vitae. Updated: May 28, 2007
ZHAOXIAN ZHOU Curriculum Vitae Updated: May 28, 2007 1 Experience Assistant Professor, School of Computing, University of Southern Mississippi 2005-2007 Postdoctoral Fellow, Dept. Electrical and Computer
More informationDefence and security engineering
Defence and security engineering 2018-2019 Symposia Symposia at Shrivenham provides a forum to Government agencies, military and civilian, industry and research establishments for the exploration and exchange
More informationPROFFESSIONAL EXPERIENCE
SUMAN CHAKRAVORTY Aerospace Engineering email: schakrav@aero.tamu.edu Texas A& M University Phone: (979) 4580064 611 B, H. R. Bright Building, FAX: (979) 8456051 3141 TAMU, College Station Webpage: Chakravorty
More informationGRADUATE COURSE SUGGESTIONS BY TOPICAL AREAS
GRADUATE COURSE SUGGESTIONS BY TOPICAL AREAS All MAE Graduate Students: required to enroll in MAE 801 (Seminar) their 1st semester All Master's Thesis Students: minimum 9 credits of MAE 695 required All
More informationMohammad Reza Meigounpoory
- 1 - Mohammad Reza Meigounpoory PERSONAL DETAILS Nationality: Iranian Place of Birth: Tehran, Iran Office Phone: Address: Department of entrepreneurship,tehran university,1 6th - north Karegar streeet,
More informationSpecial Collections Division University of Washington Libraries Box Seattle, Washington, USA (206)
Records of the Phi Beta Kappa. Washington Alpha Chapter of 1 file://///files/shareddocs/librarycollections/manuscriptsarchives/findaidsi... 9/29/2015 3:28 PM Special Collections Division University of
More informationDEVELOPMENTS IN THE APPLICATION OF LS-DYNA TO FLUID STRUCTURE INTERACTION (FSI) PROBLEMS IN RECOVERY SYSTEM DESIGN AND ANALYSIS
7 th International LS-DYNA Users Conference Fluid/Structure DEVELOPMENTS IN THE APPLICATION OF LS-DYNA TO FLUID STRUCTURE INTERACTION (FSI) PROBLEMS IN RECOVERY SYSTEM DESIGN AND ANALYSIS Anthony P. Taylor
More informationReinhard Joachim Huyssen
CV: RJ Huyssen (December 2014) Reinhard Joachim Huyssen Aeronautical Engineer (MEng) University of Pretoria Career Focus and Specialization Specializing in the art of engineering design, having designed
More informationEXPERIMENTAL STUDY OF THE MORPHING FLAP AS A LOW NOISE HIGH LIFT DEVICE FOR AIRCRAFT WING
28 TH INTERNATIONAL CONGRESS OF THE AERONAUTICAL SCIENCES EXPERIMENTAL STUDY OF THE MORPHING FLAP AS A LOW NOISE HIGH LIFT DEVICE FOR AIRCRAFT WING Yasuhiro TANI*, Yoshiyuki MATSUDA*, Akira DOI*, Yuya
More informationME-441 COMPUTER SIMULATION AND ANALYSIS
ME-441 COMPUTER SIMULATION AND ANALYSIS IN MECHANICAL ENGINEERING Instructor: Dr. Herli Surjanhata Mechanical Engineering Department Office: 328 MEC Phone: (973) 596-3317 e-mail: surjanhata@adm.njit.edu
More informationProfile : Education : Teaching Experience :
Ahmed Mostafa Hussein 2905 North Charles Street, Apartment # 107 Baltimore, MD, 21218 Cell Phone : 1-443-721-6089 ahussei4@jhu.edu, am.hussin@gmail.com Profile : A research assistant and a PhD candidate
More informationCurriculum Vitae for Academic Staff
Full Name Current Position E-mail Khalid Fatihi Abdulraheem Assistant Professor kabdulraheem@soharuni.edu.om Faculty Faculty of Engineering Academic Qualifications PhD Mechanical Engineering Main specialization
More informationYa WANG, Ph.D Assistant Professor State University of New York, Stony Brook
Ya WANG, Ph.D Assistant Professor State University of New York, Stony Brook Department of Mechanical Engineering State University of New York, Stony Brook 153 Light Engineering, Stony Brook, NY 11790 Phone:
More informationInnovation Takes Off clean sky 2
Infoday ENGINES ITD Innovation Takes Off http://www.cleansky.eu/content/homepage/about clean sky 2 ENGINES ITD Major Demonstrators WP2 WP3 WP4 WP5 & 6 Ultra High Propulsive Efficiency (UHPE) demonstrator
More informationLecture 01 Course Introduction
Lecture 01 Course Introduction Shawn Kenny, Ph.D., P.Eng. Assistant Professor Faculty of Engineering and Applied Science Memorial University of Newfoundland spkenny@mun.ca Course Learning Objectives Students
More informationSiamak Ghorbani Faal. Education. Doctor of Philosophy. Master of Science. Bachelor of Science. Page 1 of 5
Siamak Ghorbani Faal 44 Dover St., Worcester, MA, USA Tel: +1 (508) 410 1832 Email: sghorbanifaal@wpi.edu Website: http://www.wpi.edu/~sghorbanifaal/ Education Doctor of Philosophy Robotics Engineering
More informationSite Name. Bird Dimensions Species Hen harrier = data input required length (m) 0.55 = model calculates value wing span (m) 1.
Site Name Loch Urr Bird Dimensions Species Hen harrier = data input required length (m) 0.55 = model calculates value wing span (m) 1.4 speed (m/sec) 8 Turbine Dimensions Height of tower (m) 80 Blade length
More informationPressure Response of a Pneumatic System
Pressure Response of a Pneumatic System by Richard A., PhD rick.beier@okstate.edu Mechanical Engineering Technology Department Oklahoma State University, Stillwater Abstract This paper describes an instructive
More informationNonlinear Effects in Active Phased Array System Performance
Nonlinear Effects in Active Phased Array System Performance Larry Williams, PhD Director of Product Management ANSYS Inc. 1 Advanced Simulation Simulate the Complete Product Real-life behavior in real-world
More informationTHE UW SPACE ENGINEERING & EXPLORATION PROGRAM: INVESTING IN THE FUTURE OF AERONAUTICS & ASTRONAUTICS EDUCATION AND RESEARCH
THE UW SPACE ENGINEERING & EXPLORATION PROGRAM: INVESTING IN THE FUTURE OF AERONAUTICS & ASTRONAUTICS EDUCATION AND RESEARCH Since the dawn of humankind, space has captured our imagination, and knowledge
More informationTigreSAT 2010 &2011 June Monthly Report
2010-2011 TigreSAT Monthly Progress Report EQUIS ADS 2010 PAYLOAD No changes have been done to the payload since it had passed all the tests, requirements and integration that are necessary for LSU HASP
More informationDelft University of Technology Faculty of Aerospace Engineering Kluyverweg HS Delft The Netherlands. T +31 (0) M
Delft University of Technology Faculty of Aerospace Engineering Kluyverweg 1 2629 HS Delft The Netherlands T +31 (0)15 27 87192 M study-ae@tudelft.nl August 2017 Faculty of Aerospace Engineering Bachelor
More informationMECHANICAL ENGINEERING- MECH (MECH)
Mechanical Engineering-MECH (MECH) 1 MECHANICAL ENGINEERING- MECH (MECH) Courses MECH 101 Introduction to Mechanical Engineering Credits: The discipline of Mechanical Engineering as described in problems
More informationRotordynamics Analysis Overview
Rotordynamics Analysis Overview Featuring Analysis Capability of RAPPID Prepared by Rotordynamics-Seal Research Website: www.rda.guru Email: rsr@rda.guru Rotordynamics Analysis, Rotordynamics Transfer
More informationResearch Interests. Education
Pablo L. Sala Department of Computer Science, University of Toronto 6 King s College Rd., Toronto, ON, Canada M5S 3G4 Tel: (416) 946-8768, Fax: (416) 978-1455 E-mail: psala@cs.toronto.edu, URL: www.cs.toronto.edu/~psala
More informationEducational Courses 2016
Educational Courses 2016 Course 1106 : Gas Regulator Troubleshooting Prerequisite : Course 1100 or 2 years experience This course is intended for technicians responsible for installing, maintaining and
More informationRealize Your Product Promise. Maxwell
Realize Your Product Promise Maxwell DC permanent magnet motor solved by Maxwell with ANSYS RMxprt Build reliability and efficiency into your electromagnetic and electromechanical designs with ANSYS Maxwell.
More informationCURRICULUM VITAE. October 2017
Work Address: E-mail: CURRICULUM VITAE YITZCHAK YIFRACH (Senior Teacher) October 2017 ORT Braude College, Department of Mechanical Engineering Snunit 51 St. P.O. Box 78, Karmiel 2161002, Israel Tel.: +
More informationSystem Coupling 14.0 Twoway FSI with ANSYS FLUENT and ANSYS Mechanical
System Coupling 14.0 Twoway FSI with ANSYS FLUENT and ANSYS Mechanical ANSYS Regional Conference 1 Fluid-Structure Interaction Applications Floating thin film Wind Turbine Mitral valve 2 Fluid-structure
More informationSloshing of Liquid in Partially Filled Container An Experimental Study
Sloshing of Liquid in Partially Filled Container An Experimental Study P. Pal Department of Civil Engineering, MNNIT Allahabad, India. E-mail: prpal2k@gmail.com Abstract This paper deals with the experimental
More informationIEEE IoT Vertical and Topical Summit - Anchorage September 18th-20th, 2017 Anchorage, Alaska. Call for Participation and Proposals
IEEE IoT Vertical and Topical Summit - Anchorage September 18th-20th, 2017 Anchorage, Alaska Call for Participation and Proposals With its dispersed population, cultural diversity, vast area, varied geography,
More informationMSc in Aerospace Engineering,TU Delft, Cum Laude
Academic profiles John-Alan Pascoe Google scholar https://scholar.google.nl/citations?user=ccjn7weaaaaj&hl=en ResearchGate https://www.researchgate.net/profile/john-alan_pascoe Orcid ID 0000-0003-2771-8285
More informationTesca Fitzgerald. Graduate Research Assistant Aug
Tesca Fitzgerald Webpage www.tescafitzgerald.com Email tesca.fitzgerald@cc.gatech.edu Last updated April 2018 School of Interactive Computing Georgia Institute of Technology 801 Atlantic Drive, Atlanta,
More information