Mohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the state of Ohio OBJECTIVE EDUCATION RELEVANT COURSES PUBLICATIONS
|
|
- Donna Thornton
- 5 years ago
- Views:
Transcription
1 Mohammad Abuhaiba, Ph.D., P.E. Registered Professional Engineer at the state of Ohio OBJECTIVE To secure a challenging Academic / Technical position in the field of Mechanical Engineering with specific interest in Hydraulic Hybrid vehicles, Machine design, CAD/CAM, Materials science and manufacturing. EDUCATION The University of Toledo, Toledo, Ohio, USA. Doctor of Philosophy in Mechanical Engineering, May Ph.D. Dissertation: Mathematical Modeling and Analysis of a Variable Displacement Hydraulic Bent Axis Pump Linked to High Pressure and Low Pressure Accumulators Master of Science in Mechanical Engineering, 8/ 93. Master Thesis: Creep Behavior, Stress-Strain Response, and Toughness Characteristic of Haynes Alloy 556 at Elevated Temperatures. Bachelors of Science in Mechanical Engineering, 8/ 90. Birzeit University, West Bank, Palestine. Bachelors of Science in Mechanical Engineering. Completed 140 semester hours of 170 hours, and then transferred to the University of Toledo. RELEVANT COURSES Advanced Finite Element Analysis Fracture Mechanics Advanced Mechanics of Materials Advanced Topics of Controls Vehicle Dynamics Fatigue of Metals Advanced Measurement Systems Advanced Dynamics Elasticity PUBLICATIONS Books: 1. Abuhaiba, Mohammad, Variable Displacement Hydraulic Bent Axis Pumps, Mathematical Dynamic Modeling and Analysis, 1 st ed., 2009, Saarbruecken, VDM Publishing House Ltd. ISBN: Page 1 of 5
2 2. Contributed in co-authoring chapter 7 entitled Hydraulic Hybrid Vehicles of the book: 3. Kutz, Myer, Environmentally Conscious Transportation, Environmentally Conscious Engineering, Myer Kutz Series, ISBN-10: , ISBN-13: John Wiley & Sons. Journal Papers: 4. Abuhaiba, Mohammad and Olson, Walter, Geometric and Kinematic Modeling of a Variable Displacement Hydraulic Bent Axis Piston Pump, Computational and Nonlinear Dynamics Journal, ASME, M.S. Abu-Haiba, A. Fatimi, M. Zoroufi, Creep Deformation and Monotonic stress-strain behavior of Haynes alloy 556 at elevated temperatures, Journal of Material Science V34, (2002), pp Conference Papers: 6. Abuhaiba, Mohammed S.; El Hayek, Maha M.; Haboub, Diana M.; Al Kafarna Naheel N, The Possibility of Implementing Geothermal Energy for Cooling Applications in Gaza Strip, International Conference on Water, Energy and Environment 2011, The American University of Sharjah, the United Arab Emirates. 7. Abuhaiba, Mohammad and Olson, Walter, Modeling of a Variable Displacement Hydraulic Bent Axis Piston Pumps For Hybridizing Vehicles, in The 15th Pacific Automotive Engineering Conference APAC15, SAE, Veitnam 8. A.M. Mohaghegh, M.H. Elahinia, M.S. Abuhaiba, W. Olson, Application of Smart Materials for Noise and Vibration of Hydraulic Systems, Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, September 4-7, 2007, Las Vegas, Nevada, USA. AWARDS The University of Toledo, Mechanical, Industrial and Manufacturing Engineering Department, Graduate Research Assistantship, 2007 to 2009 The University of Toledo, Mechnical, Industrial and Manufacturing Engineering Department, Graduate Teaching Assistantship, 2005 to 2007 CAD / CAM and CAE SKILLS JAVA ABAQUS CADKEY CARSIM FORTRAN IDEAS G-Code MS-Office BASIC NISA CLEAR-CUT CorelDraw AutoLISP FEMLAB MasterCAM Photoshop Motorola Micro-controllers AutoCAD MathCAD Flash VSA22 (3D Variation Analysis) 3DS MAX MatLab & SimuLink Adobe Reader Mathematica SolidWorks MiniTab ChemCAD Page 2 of 5
3 TRAINING COURSES ATTENDED 1. Specialized Training Institute for Metal Industries, Amman Industrial City, Jordan. CNC programming of Lathe & Milling machines, From 3/2002 to 4/ The Islamic University of Gaza, Palestine. 2/2000 Programming, Principles of Java Building Interactive Media for Technical Education and Training Using Multimedia Software Tools, 12/98 3. TMX Philippines International, Philippines. EXPERIENCE Microprocessor Programming for Motorolla 68000, from 5/96 to 7/96 Module and Watchcase Design for Timex watches, 2/96 I. Horse Power Engineering, Gaza, Palestine, II. Page 3 of 5 CEO and Mechanical Engineering Consultant, from 7/2010 to present CAD/CAM Product design and development Computer Numerical Control (CNC) Renewable & alternative energy systems Project management Technical & economic feasibility studies The Islamic University of Gaza, Industrial Engineering Department, Gaza, from 2/98 to present Head of Industrial Engineering Department: from 9/2004 to 1/2005 and 9/2010 to 8/2011 Head of Industrial and Mechanical Engineering Departments: from 9/2011 to present Taught the courses: 1. Product Design for Ease of Manufacturing and Assembly (DFMA) 2. Design of Experiments 3. Computer Numerical Control (CNC) 4. Engineering Materials 5. Manufacturing Processes I 6. Manufacturing Processes II 7. Engineering Economy 8. Engineering Mechanics 9. Dynamics 10. Thermodynamics 11. Numerical Methods. Supervised the following senior projects: Facility Layout and Design for Scrap Steel recycling at Gaza Heat Pipe Test Rig Held the following Training programs in the Community Service & Continuing Education Center (CSCEC): 3D Solid Modeling using AutoCAD
4 III. IV. Page 4 of 5 AutoLISP programming Computer Numerical Control (CNC) Prepare Engineering proposals for the CSCEC department. Member of the following Committees: Member and key founder of the Energy Group. Member of the Multimedia Group. Impact Engineering, Toledo, Ohio, USA. Consultant and Modeling Engineer, from 6/2007 to 10/2007 Build and develop a mathematical model for Power Management Strategy of Hydraulic Hybrid Vehicles to minimize fuel consumption. The University of Toledo, Toledo, Ohio, USA. Teacher Assistant, from 8/2005 to 5/ Mechanical Engineering Design I 2. Mechanical Engineering Design II 3. Materials science 4. Vehicle Dynamics 5. AutoCAD. V. The Community College of Applied Science & Technology, Gaza, Palestine. VI. Vice Dean for Academic Affairs, from 9/2001 to 8/2003. Director of the Community College of Applied Science & Technology, from 9/ 98 to 8/2001. Abuhaiba Co. Ltd., Gaza. Design & Consultant Engineer and a Manager, from 1/ 97 to 8/98 Design and development of dynamic mechanical systems on request. Mechanical elements design and selection. Solid modeling training using AutoCAD. Export of Engineering Equipment. Setup & Installation of computerized Time and Attendance Control Systems. VII. Timex Development Ltd., Jerusalem. Design and Research Engineer, From 9/ 95 to 12/ 96 Mechanical design and layout of the watch module and the physical constraints involved in fitting the design into the watch cavity using 3D modeling & simulation. Microprocessor programming. Research for new materials and technologies to manufacture the watch case with minimum secondary operations in a short time. VIII. Birzeit University, Birzeit, West Bank. Mechanical Engineering Instructor, from 10/ 93 to 8/ 95 Taught: 1. Machine Design I 2. Machine Design II 3. Metallurgy 4. Dynamics 5. Machine Dynamics 6. Mechanical drawing
5 IX. 7. Measurement s lab. Supervised two senior projects. Member of the following Committees: 1. Head of the Assessment Committee for the Faculty of Engineering staff for the year 94/ Member of the Computer Committee for the year 94/95. Supervisor of the computer lab of the Faculty of Engineering for the year 94/95. Held training programs in 2D & 3D drawing using AutoCAD. Applied Technologies Co., Toledo, Ohio, USA. Design and Analysis Engineer, from 9/ 91 to 8/ 93 Helical and Spur gear design. Force and strength analysis of transmissions. Suspension and multi-leaf spring design. Belleville spring, and helical compression and extension spring design. FEA of transmissions (Stress, deflection and vibration) using NISA software. Programming. X. Tiller Tool & Die Co., Toledo, Ohio, USA. CNC programmer, from 9/91 to 2/92 CNC programming of lathe, mill, and EDM machines using CLEAR-CUT software. ORGANIZATIONS Registered Professional Engineer at the state of Ohio, P.E., PE License No American Welding Society (AWS), Chairman of the Student Chapter at the University of Toledo to 12/2008 Member of the American Society of Mechanical Engineers (ASME) RESEARCH INTERESTS Hydraulic Hybrid Vehicles Dynamic Modeling of Bent Axis Pumps CAD/CAM Design for Manufacturing and Assembly Finite Element Analysis Computer Numerical Control Alternative and renewable energy systems: Geothermal Page 5 of 5
Course code Title Description Type
1st Semester 3М11OP01 3M21OM01 3M22OM01 3M23IND01 Mathematics for engineering Technical mechanics Materials and joining techniques Graphical communication 3M31IND01 Industrial design 1 Introduction to
More informationAssistant Professor, June 2008 Sep The Hashemite University, Jordan
EDUCATION Suleiman Obeidat, Ph.D. Department of Engineering Technology & Industrial Distribution Manufacturing & Mechanical Engineering Technology Program Texas A&M University, College Station, TX 77843
More informationGender Male Date of birth 21 April 1984 Nationality INDIAN. Assistant Professor in Mechanical Engineering (Machine Design)
Curriculum Vitae PERSONAL INFORMATION Mohammad Azeem 57- I Block, Muneer Apartments, Near Badi Masjid, Sir Syed Nagar, Aligarh, 202002, +91-9058819938 ask2azeem@gmail.com https://www.linkedin.com/in/azeemmohammad
More informationCURRICULUM VITAE TARIQ T. DARABSEH
CURRICULUM VITAE TARIQ T. DARABSEH Departments of Mechanical Engineering United Arab Emirates University, Al Ain-UAE Mobile: (+971)563403902 E-mail: tdarabseh@uaeu.ac.ae EDUCATION Ph.D., Mechanical Engineering,
More informationBAXTER O'TULLE 132 Horace Ave Gordonville, KY (555)
BAXTER O'TULLE 132 Horace Ave Gordonville, KY 93555 (555) 555-2938 botulle@emailplace.com RESEARCH INTERESTS Automation Distribute Systems Control Decentralization Control Mechantronics and Artificial
More informationDesign & Engineering
Paras is committed to provide cost-effective solutions that streamline manufacturing cycles, enable collaboration with outside vendors, and ultimately shorten product delivery time. With installations
More informationCADCAM DEPARTMENT NSQF COMPLIANCE COURSES
CADCAM DEPARTMENT NSQF COMPLIANCE COURSES Course Name: ADVANCE CERTIFICATE COURSE IN CNC MACHINING Duration: 1560 Hrs. /1 year NSQF Level: 5 Course content: CNC Programming & CNC Machining Engineering
More informationARCHITECTURE. Classroom Facilities
FACILITIES ARCHITECTURE Classroom Facilities Classrooms are provided with two Air-Conditioning Units and are equipped with plasma TV Laboratories The Drafting Laboratory Rooms are for architectural and
More informationTRAINING PRODUCTS NEW PRODUCTS INSIDE
S INSIDE TRAINING S Partner Partner ONLINE OR BOOKS, THE CHOICE IS YOURS TRAINING S Choose from our full line of Mastercam, SOLIDWORKS and CNC training materials, available in both book or in an online
More informationA Hands-on Approach in Teaching Machine Design
Paper ID #11528 A Hands-on Approach in Teaching Machine Design Dr. Luis E Monterrubio, Robert Morris University Luis E. Monterrubio, Ph.D. Mechanical Engineering Assistant Professor of Mechanical Engineering
More informationUNIVERSITY FACULTY OF. State of the
530577 TEMPUS 1 2012 1 RS TEMPUS JPCR http:// /iprod.masfak.ni.ac.rs iprod@ @masfak.ni.ac.rs Work package WP1: 1.2 REPORT UNIVERSITY OF KRAGUJEVAC FACULTY OF ENGINEERING State of the product development
More informationTRAINING PRODUCTS. p f caminstructor.com 330 Chandos Court, Kitchener, ON, N2A 3C2
2019 Partner Partner ONLINE OR BOOKS, THE CHOICE IS YOURS Choose from our full line of Mastercam, SOLIDWORKS and CNC training materials, available in both book or in an online format. Textbooks include
More informationM.Tech in Machine Design
M.Tech in Machine Design Department of Mechanical Engineering The National Institute of Engineering Mysore-08 (Established in 1946) A Heritage of Excellence NIE Premier educational institutions in India
More informationNSQF COMPLIANCE COURSES
NSQF COMPLIANCE COURSES Course Name: ADVANCE CERTIFICATE COURSE IN CNC MACHINING Duration: 1560 Hrs. /1 year NSQF Level: 5 Course content: CNC Programming & CNC Machining Engineering Metrology And Quality
More informationMohammad A. Gharaibeh Curriculum Vitae October 2018
Mohammad A. Gharaibeh Assistant Professor Department of Mechanical Engineering Faculty of Engineering The Hashemite University Zarqa, 13115, Jordan Phone (Office): + 962 (05) 390-3333 Ext. 4894 Webpage:
More informationProfessor Mohammad Hamzeh F. Dado
Professor Mohammad Hamzeh F. Dado Department of Mechanical Engineering Faculty of Engineering and Technology Amman 11942 Jordan E-mail: dado@ju.edu.jo Tel: W (962)6-535-5000, H (962)6-560-2103, Mobile
More informationAISHWIRYA COLLEGE OF ENGINEERING AND TECHNOLOGY Paruvachi, Bhavani W eb: aishwaryacollege.com,
AISHWIRYA COLLEGE OF ENGINEERING AND TECHNOLOGY Paruvachi, Bhavani 638312. W eb: aishwaryacollege.com, E-mail: acetdr@gmail.com Department Details for Website Name of the Department: MECHANICAL ENGINEERING
More informationSamane Zeyghami. 109 Carrollton Terrace, Apt 3, Charlottesville, VA, PHONE: (937)
Samane Zeyghami 109 Carrollton Terrace, Apt 3, Charlottesville, VA, 22903. PHONE: (937)668-5613. E-MAIL: sz3ah@virginia.edu EDUCATION Doctor of Philosophy, 2016 Charlottesville, VA Dissertation: Wing in
More informationAli H. Ammouri. Page 1/4. Education 2008 Current American University of Beirut Beirut, Lebanon. Academic Experience
Page 1/4 Beirut, Lebanon Phone +961 3 594 800 E-mail: ali.ammouri@gmail.com Ali H. Ammouri Education 2008 Current American University of Beirut Beirut, Lebanon PhD in Mechanical Engineering Research area:
More informationB.TECH(MECHANICAL) -SEDA
B.TECH(MECHANICAL) -SEDA PROGRAMME EDUCATIONAL OBJECTIVES: PEO1 PEO2 PEO3 PEO4 PEO5 Will be equipped with sound knowledge of mathematics, science and technology useful to build complex mechanical engineering
More informationPlan of Study: Diploma in Mechanical Engineering
Plan of Study: Diploma in Mechanical Engineering Year I Fall Semester 17 Credits CMPS 100B Introduction to Technical Computing for the Sciences 3 ENGL 101 Basic Academic English I 3 MATH 199 Calculus I
More informationPredictive Engineering
FINITE E LEMENT A NALYSIS Predictive Engineering Finite element analysis consulting services, software, training and technical support Composite analysis Drop-test, impact, burst analysis CFD thermal flow
More informationDepartment of Mechanical Engineering
UNDERGRADUATE COURSES Curriculum for the Degree of Bachelor of Science in Mechanical Engineering: General s 6-0-05 6-0-0 6-0-04 6-0-05 6-0-0 6-0-0 5-0-7 5-0-0 5-0-0 5-0-0 5-0-04 6-0-4 6-0-0 6-0-0 6-0-0
More informationOffice location. Office phone
BME404-ENGINEERING METROLOGY & INSTRUMENTATION Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME404-ENGINEERING METROLOGY & INSTRUMENTATION
More informationIDEAL EDUCATION MANAGEMENT &TECHNOLOGY
Diploma in Electrical Engineering (DEE) Subjects Covered Electrical Engg. Electric Circuit Power Generation Basic Electronics Solid State Devices & Circuits Switching Theory & Logic Design Electro Magnetic
More informationHiba S. Abdallah. Tripoli, Lebanon. Nationality: Lebanese Gender: Female Marital Status: Married
Hiba S. Abdallah Tripoli, Lebanon Tel: +961 (3) 746 149 E-mail: habdallah@bau.edu.lb Nationality: Lebanese Gender: Female Marital Status: Married Education PhD in Communications and Electronics Engineering,
More informationMECHANICAL ENGINEERING- MECH (MECH)
Mechanical Engineering-MECH (MECH) 1 MECHANICAL ENGINEERING- MECH (MECH) Courses MECH 101 Introduction to Mechanical Engineering Credits: The discipline of Mechanical Engineering as described in problems
More informationAsma Al-Tamimi. Experience Hashimite university Zarqa, Jordan Department Chair, Mechatronic Engineering Department
Asma Al-Tamimi Mechatronics Engineering department Hashenite University Zarqa,Jordan Tel :+962 799047004 Email: altamimi@hu.edu.jo asma_tamimi@hotmail.com Experience 2011-2012 Hashimite university Zarqa,
More informationCOURSE CONTENTS FOR THE AVTS COURSES
Revision: 00 LEARNING CONTENT Page 1 of 14 COURSE CONTENTS FOR THE AVTS COURSES AT CAD- CAM LAB, ATI, VIDYANAGAR, HYDERABAD Revision: 00 LEARNING CONTENT Page 2 of 14 III COURSE CODE CAD-01 IV COURSE TITLE
More informationPERSONAL DATA RESUME
PERSONAL DATA RESUME NAME : HESHAM AHMED HEGAZI DATE OF BIRTH : 11/2/1970 PLACE OF BIRTH : Cairo, EGYPT. NATIONALITY : Egyptian. MARITAL STATUS : Married, father of Ahmed. TELEPHONE No. : (Mobile) 2012-3910720.
More informationEuropass curriculum vitae. Academic Profile. Personal information. Education. Work Experience
Europass curriculum vitae Academic Profile Personal information Surname / First name Omirou Sotiris Telephones (+357) 22345158 ext 131 Fax (+357) 22438234 E-mail eng.os@fit.ac.cy Website http://staff.fit.ac.cy/eng.os
More informationSurface Mining Machines
Surface Mining Machines Eugeniusz Rusiński Jerzy Czmochowski Przemysław Moczko Damian Pietrusiak Surface Mining Machines Problems of Maintenance and Modernization 123 Eugeniusz Rusiński Faculty of Mechanical
More informationMECHANICAL ENGINEERING/ MANUFACTURING INDUSTRIAL TECHNOLOGY (MET)
Mechanical Engineering/Manufacturing Industrial Technology (MET) - Cuyahoga Community College 2018-2019 Catalog 1 MECHANICAL ENGINEERING/ MANUFACTURING INDUSTRIAL TECHNOLOGY (MET) MET-1100 Technology Orientation
More informationCustomized Sensors. OEM Custom-designed Sensors...from the leader in the measurement of mechanical parameters
Customized Sensors OEM Custom-designed Sensors...from the leader in the measurement of mechanical parameters OEM Custom-designed Sensors Caught in a design dilemma? Are you looking for sensing technology
More informationDEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY MASTER SOETE LABORATORY
DEPARTMENT OF ELECTRICAL ENERGY, METALS, MECHANICAL CONSTRUCTION AND SYSTEMS - EEMMECS SOETE LABORATORY MASTER THESIS @ SOETE LABORATORY A work in which a student gives proof of analytical, independent,
More informationA MODERN UNDERGRADUATE MECHANICAL ENGINEERING LABORATORY. Introduction
A MODERN UNDERGRADUATE MECHANICAL ENGINEERING LABORATORY Charles Knight 1 and Gary McDonald 2 Abstract The senior mechanical engineering laboratory curriculum at The University of Tennessee at Chattanooga
More informationCAD 153 Computer-Aided Design I CAD 153 Computer-Aided Design II INT 113 Instrumentation and Process Control I. Outcome #8 Mechanical Engineering 1
Outcome #1 Outcome #2 Outcome #3 Outcome #4 Apply for an entry level position at an firm or manufacturing facility Transfer to an applied technology/ma nufacturing baccalaureate degree major CAD 153 Computer-Aided
More informationINDUSTRIAL TECHNOLOGY
INDUSTRIAL TECHNOLOGY INDUSTRIAL TECHNOLOGY COURSES CAN BE USED AS ELECTIVE CREDITS CONTENT MISSION STATEMENT: The content area of Industrial Technology education provides a foundation for all students
More informationName: Ahmad Shahir bin Jamaludin. Phone number: / Personal motto: Educational Background:
A Name: Ahmad Shahir bin Jamaludin Address: Faculty of Manufacturing Engineering, Universiti Malaysia Pahang, Pekan Campus, 26600, Pekan, Pahang, Malaysia Phone number: 09-4245866 / 012-9148504 E-mail:
More informationFollow this and additional works at:
Marshall University Marshall Digital Scholar Recommendations Faculty Senate 5-11-2015 SR-14-15-44 CC Marshall University Follow this and additional works at: http://mds.marshall.edu/fs_recommendations
More informationProgram Specific Outcomes (PSOs) Mechanical Engineering Department PSO 1 PSO 2 PSO 3. Program Outcome (POs) PO 1 PO 2 PO 3 PO 4 PO 5 PO 6
Program Specific Outcomes (PSOs) Mechanical Engineering Department PSO 1 PSO 2 PSO 3 Apply their understanding in the realm of Design, Production and thermal fluid sciences to solve engineering difficulties
More informationKhalid Osman Daffallah Ahmed. Associate Professor of Applied Physics
Khalid Osman Daffallah Ahmed Associate Professor of Applied Physics Work Address: Kingdom of Saudi Arabia Taibah University Faculty of Science Physics Department P. O. Box 344 Telephone: 00966597907821
More informationDec Next consortium meeting on March 17, 2015 at Ohio State Univ., Columbus, Ohio.
Dec.2014 Research Scope and Objective Current Research & Development Activities Recent Publications (2012 2014) Graduate Student Profiles Future HGSim Functionalities Contact Information Caterpillar Dana
More informationDarren C. Olson EDUCATION PROFESSIONAL HISTORY IN EDUCATION. Central Washington University
Darren C. Olson EDUCATION Indiana State University Ph.D. in Technology Management, May 2004 Quality Systems Specialization Bowling Green State University M.Ed. in Career and Technology Education, May 1997
More informationContact Stress Distribution of Large Diameter Ball Bearing Using Hertzian Elliptical Contact Theory
Available online at www.sciencedirect.com Procedia Engineering 38 (2012 ) 264 269 Conference Title Contact Stress Distribution of Large Diameter Ball Bearing Using Hertzian Elliptical Contact Theory 1
More informationDesign and Analysis of Self Centering Steady Rest for Supercut-6 CNC Turning Machine Using CAD & FEA
Design and Analysis of Self Centering Steady Rest for Supercut-6 CNC Turning Machine Using CAD & FEA 1 Satish G. Bahaley, 2 Rajendra L. Bharambe Prof. Ram Meghe Institute of Technology & Research, Badnera,
More informationCIRRICULUM VITAE William J. Thomas, Ph.D.
WILLIAM J. THOMAS, Ph.D. 4002 Perry Knoll Court Sugar Land, TX 77479-5259 Phone: (281) 980-4658 Mobile: (281) 222-5119 Email: wjthomas@windstream.net United States citizen EXPERIENCE 10/05 FMC Technologies
More informationPersonal Details. Career Objective. Awards and Accomplishments
Dr. Anis Fatima Assistant professor Industrial and Manufacturing NED University of Engineering and Technology Room No. 204, IM building Email: anisf@neduet.edu.pk Telephone Ext: 2250 Personal Details Gender
More informationMachine Tool Technology
184 Location: Patterson Campus - Bldg. F Program Information Almost every product made by American industry contains metal parts or is manufactured by machines made with metal parts. With high demand for
More informationDR. KRISHAN VERMA. Department of Mechanical Engineering, YMCA University of Science & Technology, Faridabad , Haryana, India
DR. KRISHAN VERMA Mob. +91-9716792955 er.krishanverma@yahoo.com dr.krishanverma.me@gmail.com #403, Deptt. of Mechanical Engineering, YMCA University of Science & Technology, Sector-6, Mathura Road, Faridabad-121006,
More informationDepartment of Biotechnology Engineering. Department of Electrical and Computer Engineering. Department of Manufacturing and Materials Engineering
KULLIYYAH OF ENGINEERING CONTACT DETAILS Deputy Dean (Postgraduate & Research) Kulliyyah of Engineering, IIUM P.O. Box: 10, 50728 Kuala Lumpur, MALAYSIA T : +60-6196 4494/4511/ 4595 F : +60 6196 4568 W:
More informationTECHNOLOGY EDUCATION
TECHNOLOGY EDUCATION Graduation Requirement: All students must earn one credit in Arts or Career & Technical Education classes. COURSE TITLE CREDITS GRADES OFFERED Communications Pathway-Media* Introduction
More informationA New Approach to Teaching Manufacturing Processes Laboratories
A New Approach to Teaching Manufacturing Processes Laboratories John Farris, Jeff Ray Grand Valley State University Abstract The manufacturing processes laboratory taught in the Padnos School of Engineering
More informationDesign and Analysis of Spindle for Oil Country Lathe
Design and Analysis of Spindle for Oil Country Lathe Maikel Raj K 1, Dr. Soma V Chetty 2 P.G. Student, Department of Mechanical Engineering, Kuppam Engineering College, Kuppam, Chittoor, India 1 Principal,
More information12225 N Woodcrest Drive, Apt # Dunlap, IL Phone:
SRINIVASULU MALAGARI 12225 N Woodcrest Drive, Apt # 106 Email: malagari_srinivasulu@cat.com Dunlap, IL- 61525 Phone: 316-260-0457 PROFESSIONAL SUMMARY: Strong understanding of the Diesel Engine aftertreatment
More informationIJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 05, 2016 ISSN (online):
IJSRD - International Journal for Scientific Research & Development Vol. 4, Issue 05, 2016 ISSN (online): 2321-0613 Static Analysis of VMC Spindle for Maximum Cutting Force Mahesh M. Ghadage 1 Prof. Anurag
More informationEG - Engineering Graphics
Coordinating unit: 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering Teaching unit: 717 - EGE - Department of Engineering Presentation Academic year: Degree: 2018 BACHELOR'S
More informationHIRING COMPANY: Dynomax Inc. INDUSTRY: Aerospace and Defense POSITION: CNC Programmers, Machinists, Operators
CNC Programmers, Machinists, Operators Dynomax is looking for operators, machinists and programmers available for basic setup through complete processing of advanced components for CNC turning/cnc milling
More informationBS-Electrical Engineering (Spring 1985) University of Oklahoma, Norman, OK
101 Oklahoma Drive Portales, NM 88130 Office: (575) 562-2073 Home: (575) 356-4467 Cell: 575-825-0199 E-mail: hamid.allamehzadeh@enmu.edu EDUCATION: PH.D. - ELECTRICAL ENGINEERING (Spring 1996) Dissertation:
More informationAC : INTEGRATED HANDS-ON MECHANICAL SYSTEMS LAB- ORATORIES
AC 2011-2653: INTEGRATED HANDS-ON MECHANICAL SYSTEMS LAB- ORATORIES Arif Sirinterlikci, Robert Morris University ARIF SIRINTERLIKCI received B.S. and M.S. degrees in Mechanical Engineering from Istanbul
More informationIntroduction. Figure 1. Bender Machine Bend Heads
ANSYS Nonlinear Functions Applied in Automotive Brake Pedal Design and Manufacture Jessica Song GHSP Shanghai, PRChina Randy Phinney GHSP Grand Haven MI, USA Abstract A finite element model for a unique
More informationMECHANICAL ENGINEERING FUNDAMENTALS Training Duration 5 days
Training Title MECHANICAL ENGINEERING FUNDAMENTALS Training Duration 5 days Training Dates & Venue REF ME091 Mechanical Engineering Fundamentals 5 28 Aug 01 Sep $4,250 Abu Dhabi, UAE Training will be held
More informationCurriculum Vitae. Abd El Khalick Mohammad, 17 Nov Doctor of Engineering H-index: 6 and Citation: 107 (Google Scholar) 1.
Curriculum Vitae Abd El Khalick Mohammad, 17 Nov. 1984 Doctor of Engineering H-index: 6 and Citation: 107 (Google Scholar) Previous position: Research Fellow Centre for E-City EXQUISITUS, Electrical and
More informationStructural Analysis Control System Engineering Cim Elective I Computer Graphics for Cad/Cam. Advanced in Operating System Design
Sr No Name of Branch RASHTRASANT TUKADOJI MAHARAJ NAGPUR UNIVERSITY **** MTECH,ME,MDES, MARCH FIRST SEMESTER EXAMINATION OF summer 2015 # PROGRAMME( WRITTEN ) # MTech,ME,MDes,MArch FIREST SEMESTERsummer
More informationAIRCRAFT TECHNOLOGY PROGRAMME
AIRCRAFT TECHNOLOGY PROGRAMME 1 st SEMESTER BLT101 COMPUTER TECHNOLOGIES-I Examination of methods and techniques to access information and acquisition of skills to use them. Basic concepts of information
More informationUNIVERSITY OF ENGINEERING AND MANAGEMENT, JAIPUR Course Description
Title of Course: Advanced Optimization Techniques Course Code: PE201 L-T-P Scheme: 3-1-0 Course Credits: 4 Introduction: In Engineering Designs, it is often required to arrive at the optimum design with
More informationFirst Name: Mohammad Reza Last Name: Karamooz Ravari Date of Birth: 15 September 1985 Tel: +989132960234 Email: m.karamooz@kgut.ac.ir, mrkaramoozravari@gmail.com, m.karamoozravari@me.iut.ac.ir Assistant
More informationMechanical Engineering
Department of Engineering Programs Using techniques, skills, and modern engineering modeling tools, students must demonstrate their abilities to apply mathematics, engineering science, and technology principles
More informationCherry Hill High School East, Cherry Hill, NJ Honor Roll for four years, Graduated Magna Cum Laude, June 2002
TODD KENT Toddkent1@gmail.com Permanent Address: 4651 Sheldon St., Philadelphia, PA 19127 (856) 905-3679 Full Portfolio: www.twmmedia.com/toddkent/tkportfolio.pdf WORK EXPERIENCE Senior Test Engineer,
More informationBachelor of Science Program
Bachelor of Science Program The 4-year Bachelor of Science program comprises two phases. In the first five semesters, students are provided with a broad foundation in basic sciences and electrical engineering.
More informationCURRICULUM VITAE. October 2017
Work Address: E-mail: CURRICULUM VITAE YITZCHAK YIFRACH (Senior Teacher) October 2017 ORT Braude College, Department of Mechanical Engineering Snunit 51 St. P.O. Box 78, Karmiel 2161002, Israel Tel.: +
More informationDESIGN AND FATIGUE ANALYSIS OF CHOKE VALVE BODY
DESIGN AND FATIGUE ANALYSIS OF CHOKE VALVE BODY N. SURESH 1, B. SRINIVASA REDDY 2 Assistant professor, Geethanjali College of Engineering and technology, Cheeryal, Hyderabad, TS, India. ABSTRACT Design
More informationLecture 01 Course Introduction
Lecture 01 Course Introduction Shawn Kenny, Ph.D., P.Eng. Assistant Professor Faculty of Engineering and Applied Science Memorial University of Newfoundland spkenny@mun.ca Course Learning Objectives Students
More informationMFGE Manufacturing Engineering
MFGE Manufacturing Engineering 1 MFGE Manufacturing Engineering MFGE 2142 Fundamentals of Engineering Mechanics 4 Credit Hours. 0,3 Lecture Hours. 0,2 Lab Hours. This course provides an introductory survey
More informationModern Engineering Laboratories That Deliver
Session 2159 Modern Engineering Laboratories That Deliver Charles Knight Mechanical Engineering University of Tennessee at Chattanooga Abstract Electronic instrumentation and computer data acquisition
More informationEngineering Department. Ocean Panel
Mechanical Engineering g Faculty Automotive, Aeronautical & Ocean Engineering Department Ocean Panel innovative. entrepreneurial. global innovative. entrepreneurial. global Ocean Panel Assoc. Prof. Dr
More informationCNC Machinist: JOB CODE: CNC operator/machinist
CNC Operator and Setup/Machinist Dynomax is looking CNC Operators and Setup/Machinists available for basic setup through complete processing of advanced components for CNC turning/cnc milling machines
More informationTIPS FOR CHOOSING A PROTOTYPING MACHINE SHOP
CHOOSING the right prototyping machine shop for your next project is quite possibly the most important decision you will make in the entire process. This is particularly true for entrepreneurs with little
More informationDesign and Manufacturing Curriculum in Industrial Engineering at Mercer University
Design and Manufacturing Curriculum in Industrial Engineering at Mercer University R. Radharamanan 1 Abstract This paper presents an overview of design and manufacturing curriculum in effect at Mercer
More informationDYNAMIC STUDIES OF ROLLING ELEMENT BEARINGS WITH WAVINESS AS A DISTRIBUTED DEFECT
DYNAMIC STUDIES OF ROLLING ELEMENT BEARINGS WITH WAVINESS AS A DISTRIBUTED DEFECT by CHETTU KANNA BABU INDUSTRIAL TRIBOLOGY MACHINE DYNAMICS AND MAINTENANCE ENGINEERING CENTER Submitted in fulfillment
More informationBusiness Economics & Accountancy [201-S] Principles of Management-II [211-S] Business Statistics-I [212-S] Conversational English-I [213-S]
Programme for the Diploma in /Technology (Fulltime Course) Part-I 2nd Semester Examination - June 2014 (For REGULAR students) Date Time All Branches except ARCH, MOPM, MT, PHO, DP ARCH MOPM MT PHO DP 04.06.2014
More informationجامعة البلقاء التطبيقية
The curriculum of associate degree in Mechanical Design specialization consists of (7 credit hours) as follows: Serial No. Requirements First University Requirements Second Engineering Program Requirements
More informationWAYNE STATE UNIVERSITY
Sa Ed M. Salhieh, Ph.D. د. سائد محمد عيسى صالحيه Associate Professor of Industrial Engineering Faculty of Engineering & Technology Amman, Jordan Email: salhieh@ju.eu.jo EDUCATION WAYNE STATE UNIVERSITY
More informationNTMA-U Web-based module training
NTMA-U Web-based module training Modules are self-paced and interactive. Each module takes approximately 30-40 hours to complete. Instruction includes quizzes to progressively test the user s understanding.
More informationHantang Qin, Ph.D., Assistant Professor
Hantang Qin, Ph.D., Assistant Professor Department of Industrial and Manufacturing Systems Engineering Iowa State University 3019 Black Engineering Building 2529 Union Drive Ames, IA, 50011-2030 Phone:
More informationTECHNOLOGY SYSTEMS MANAGEMENT (TSM)
Technology Systems Management (TSM) 1 TECHNOLOGY SYSTEMS MANAGEMENT (TSM) Courses primarily for undergraduates: TSM 110: Introduction to Technology (1-0) Cr. 1. F. Prereq: AST or I Tec majors only or permission
More informationUNIVERSITI TEKNOLOGI MARA
UNIVERSITI TEKNOLOGI MARA PARAMETERS STUDY ON THE FABRICATION OF NICKEL- TITANIUM SHAPE MEMORY ALLOY CORE-SHEATH FRICTION YARN (NiTi-SMA CSFY) via DREF SPINNING MACHINE MOHAMMAD HARRIS M. YAHYA Thesis
More informationMIDLAND COLLEGE SYLLABUS DFTG 1305 TECHNICAL DRAFTING 2-4
Course Description: Text, References, and Supplies: A computer-aided modeling course. Development of three-dimensional drawings and models from engineering sketches and orthographic drawings and utilization
More information2. The re-examination application link on the portal will be active during the below mentioned period:
IMPORTANT INSTRUCTIONS TO CANDIDATES 1. All the eligible students who have enrolled in the Academic Year 2014-2015 onwards in the first year of the program are hereby informed to apply for the respective
More informationConcept to Connection
Innovative Interconnect Solutions Design Through Manufacture of High-Performance Interconnect Systems, Connectors & Cable Assemblies Concept to Connection Solving Interconnect Problems Quickly Since 1966
More informationUNIVERSITY MASTER S DEGREE IN RESEARCH IN INDUSTRIAL TECHNOLOGY
UNIVERSITY MASTER S DEGREE IN RESEARCH IN INDUSTRIAL TECHNOLOGY English Version University Master s Degree in Research in Industrial Technology INFORMATION IDENTIFYING THE QUALIFICATION Name and status
More informationEffect of spindle speed and feed rate on surface roughness of Carbon Steels in CNC turning
Available online at www.sciencedirect.com Procedia Engineering 38 (2012 ) 691 697 International Conference on Modeling, Optimization and Computing (ICMOC 2012) Effect of spindle speed and feed rate on
More informationBrian T. Lester. PROFESSIONAL EXPERIENCE: Texas A&M University College Station, TX. Cell: (815)
Brian T. Lester 8205 Raintree Dr. blester2@tamu.edu College Station, TX 77845 http://smart.tamu.edu Cell: (815) 985-7531 EDUCATION: Doctor of Philosophy, Aerospace Engineering (3.94/4.0) (2009-Present)
More informationAutomotive Technology
Automotive Technology Dr. Mohamad Zoghi, Acting Chair Automotive Technology Department Mohamad.Zoghi@farmingdale.edu 631-794-6292 School of Engineering Technology Associate in Applied Science Degree The
More informationRESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA, SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA, 2016 Volume 24, Number 39
RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA 2016 Volume 24, Number 39 APPLICATION OF NUMERICAL SIMULATION FOR THE ANALYSIS OF THE
More information06 March Day Date All Streams. Thursday 03 May 2018 Engineering Mathematics II. Saturday 05 May 2018 Engineering Physics
/ SCHOOL OF TECHNOLOGY MANAGEMENT &ENGINEERING FINAL EXAMINATION TIME TABLE (ACADEMIC YEAR: 2017 18) MASTER OF BUSINESS ADMINISTRATION IN TECHNOLOGY MANAGEMENT (2017-22) YEAR: I, SEMESTER: II CAMPUS: MUMBAI,
More informationMechanical Engineering
Mechanical Engineering-1 Undergraduate Bulletin 2018-2019 Mechanical Engineering Faculty: Paliwal, Chair, Facas, Grega, Sepahpour, Shih, Wang, Yan The Department of Mechanical Engineering offers an academic
More informationSHAPED BY INNOVATION.
SHAPED BY INNOVATION www.fishercast.com Engineering the best value At FisherCast Global, we are committed to engineering cost-effective, innovative manufacturing solutions for your small component production
More informationCollege of Engineering
College of Engineering Experience American Higher Education in the Gulf American University of Sharjah, founded in 1997, is a not-for-profit, independent, coeducational institution of higher education
More informationProgramme Specifications B. Tech. Programme Programme: Mechanical Engineering Department: Mechanical and Manufacturing Engineering
Programme Specifications B. Tech. Programme Programme: Mechanical Department: Mechanical and Manufacturing Faculty of & Technology M. S. Ramaiah University of Applied Sciences University House, New BEL
More information