Type of system: fully automated operation Element types Pivotable end panel: Standard element: Door with frame: Fully automated drive and locking. Fully automated travel With an integrated door closer in the upper clamping profile. Locking by means of a centred door lock. Security components for alarm technology possible. Drive unit Latch Upper clamping profile Track Drive unit Pivotable end panel Standard element Standard element Door with frame Standard element End element and transom window 4 7 20 Clear height Floor box Electric floor lock Face-side stud bolt element connection Overall system width Lower clamping profile Floor guide Dimensions Element width: 500-1300 mm Element height: up to 4000 mm (maximum element size 4.9 m²) Special solution with larger dimensions possible. System weight: Element joint: Ceiling joint: Floor joint: Element thickness (clamping profile): Height of clamping profile: Floor-side track stainless steel ESG 12 mm ca. 35 kg/m² VSG 14 mm ca. 40 kg/m² 4 mm 20 mm 7 mm 36 mm mm 25/19/25/2 Element suspension by 2 rollers with positive guidance The course of the wall is possible in either a linear, segmented, angled or curved layout. Brush seal at the ceiling and floor joints possible. Installation height Ceiling-side track: Drive unit (depending on type): Drive pivotable panel: Latch (depending on type): Axle 80 mm Stacking area mm 110 to 160 mm 160 mm 110 to 210 mm We are happy to assist you for special solutions. Sheet 02.002
Movable wall: fully automated operation with pivotable end panel Combinated drive Latch Track Drive 1 20 Pivotable end panel Standard element Standard element Standard element Clear height 7 Floor box Electric floor lock Floor guide Face-side stud bolt element connection Clear width min.105 84 stacking measure Element width Access opening for combined drive and latch Access opening for drive 400 x 400 Sheet 02.102
Standard element with floor guide Track LE track FF 7 Clear height max. 4000 20 Face-side stud bolt Element width max. 1300 Floor guide Sheet 02.210
Framed door element with transom window Track 20 LE track 11 Door closer (integrated in the clamping profile) Clear height max. 4000 2 Frame profile FF 7 4 Element width max. 1200 Floor guide Sheet 02.211
Angled element with square profile angle and floor guide Track 20 LE track FF 7 Clear height max. 4000 Face-side stud bolt Element width max. 1300 Floor guide Sheet 02.213
End element with floor guide Track 20 LE track Clear height max. 4000 End profile OKFFB 7 Face-side stud bolt Element width max. 1300 Floor guide Sheet 02.214
Track type 7 with ceiling profile LERC Concrete 80 80 LESC 20 Clear height 36 Sheet 02.303
Mounting options Track type 7 Mounting to concrete ceiling Mounting to concrete girder min.130 min.140 Mounting to steel beam Lateral mounting (to girder, wall) min. 130 Sheet 02.306
Track type 7 fully automated operation Track route with parallel stacking area Track route - straight 84 Axis of separation wall Track route - angled min. 90-220 depending on the angle Track route - multiply curved Track route - curved or segmented min. R3000 Sheet 02.405
Track type 7 fully automated operation Track route with parallel h stacking area Track route - straight 84 10 Axis of separation wall Track route - angled min. 90-220 depending on the angle Track route - multiply angled Track route - curved or segmented min. R3000 Sheet 02.406
Mitre element edge Element edge 135 glass ESG-12mm Element edge 90 with 40 Q-tube 135 ESG 4 12 Element edge 135 glass VSG-14mm 4 12 or 14 12 or 14 ESG VSG Element connection to angular wall 4 135 ESG VSG 14 VSG Sheet 02.501
Pivotable end panel Pivot at the bottom Floor lock with profile cylinderr Wall joint 7 Floor bushing ø30 36 Wall joint 50 Profile cylinder (PZ) 4 Sheet 02.503
Floor-side track Floor track height-adjustable Floor track embedded in screed Clear height FF UE Bare floor 7 25 Clear height Floor guide track Stainless steel min. 66 UE Screed FF Floor guide track Stainless steel 19 7 25 Sheet 02.505
Niche passage with brush seal Wall closed Wall in stacking position Element 1 as a niche closure! Sheet 02.506
Niche passage with end profile Wall closed Wall in stacking position Element 1 as a niche closure! Sheet 02.507
Floor and ceiling connections with brush seals LESC 20 Brush seal FF 7 Clear height Brush seal Sheet 02.508 As of: 02-2015
Fully automated operation - key switch Key switch Installation in the interior of a bank OPEN CLOSE Cavity wall switch box hole saw Ø68mm depth 64 mm 153,5 Cavity wall switch box hole saw Ø68mm depth 64 mm 81,5 64 48 Key switch Installation in a self-service area OPEN CLOSE 81,5 Cavity wall switch box hole saw Ø68mm depth 64 mm 81,5 64 14 Sheet 02.601
OPEN OPEN CLOSE CLOSE Details and Examples Fully automated operation - cable plan belt drive Key switch Installation in the interior of the Bank Key switch Installation in a self-service area 230 V socket by customer provided socket To the floor box To the ceiling of the stacking area Control box WxHxD: 500x500x210 Space required for installation 550x550x240 Magnetic contact Physical monitoring by customer Alarm technology provided by customer Access opening for combined drive and latch Access opening for drive 400 x 400 Sheet 02.602