*RoHS OMPLINT eatures RoHS compliant* Surface Mount SM package Standoff Voltage: 5. to 17 volts Power issipation: 3 watts Model 214L is currently available, although not recommended for new designs. Model SMLJ is preferred. 214L Transient Voltage Suppressor iode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. ourns offers Transient Voltage Suppressor iodes for surge and S protection applications, in compact chip package O-214 (SM) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 17 V and reakdown Voltage up to 2 V. Typical fast response times are less than 1. ns for unidirectional devices and less than 5. ns for bidirectional devices from V to Minimum reakdown Voltage. ourns hip iodes conform to J standards, are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. lectrical haracteristics (@ T = 25 Unless Otherwise Noted) Parameter Symbol Value Unit Minimum Peak Pulse Power issipation (T P = 1 ms) (Note 1,2) P PK 3 Watts Peak orward Surge urrent 8.3ms Single Half Sine Wave Superimposed on Rated Load I SM 3 mps (Note 3) (J Method) Steady State Power issipation @ T L = 75 P M(V) 5. Watts Maximum Instantaneous orward Voltage @ I PP = (or Unidirectional Units Only) V (Note 5) Volts Operating Temperature Range T J -55 to +15 Storage Temperature Range T STG -55 to +175 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above T = 25 per Pulse erating urve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). 4. Single Phase, Half Wave, 6 Hz, resistive or inductive load. or capacitive load, derate current by 2 %. 5. V = 3.5 V on 214L-T5.L through 214L-T9L and V = 5. V on 214L-TL through 214L-T17L. sia-pacific: Tel: +886-2 2562-4117 ax: +886-2 2562-4116 urope: Tel: +41-41 768 5555 ax: +41-41 768 551 The mericas: Tel: +1-951 781-55 ax: +1-951 781-57 www.bourns.com How To Order 214L - T 5. L ommon ode hip iode Package 214L = 3 kw SM/O-214 Model T = Transient Voltage Suppressor Series Working Peak Reverse Voltage 5. = 5. V RWM (Volts) 17 = 17 V RWM (Volts) Suffix = 5 % Tolerance evice = 5 % Tolerance idirectional evice Terminations L = % Sn (RoHS ompliant) *RoHS irective 22/95/ Jan 27, 23 including nnex. ustomers should verify actual device performance in their specific applications.
ompliance I 6-4-2 S (Min. Level 4) I 6-4-4 T I 6-4-5 Surge 214L Transient Voltage Suppressor iode Series lectrical haracteristics (@T = 25 unless otherwise noted) Maximum Maximum Maximum Unidirectional evice idirectional evice Working Peak Reverse Reverse Reverse reakdown Voltage Reverse Leakage Voltage Surge Part Part Part Part V R (Volts) Voltage @ V RWM @IRSM urrent Number Marking Number Marking Min. Max. @ I T (m) V RWM (Volts) I R (u) V RSM (Volts) I RSM (mps) 214L-T5.L H 214L-T5.L I 6.4 7.82 1 5 9.2 326. 214L-T6.L HG 214L-T6.L IG 6.67 8.15 1 6 1.3 291.3 214L-T6.5L HK 214L-T6.5L IK 7.22 7.98 1 6.5 5 11.2 267.9 214L-T7.L HM 214L-T7.L IM 7.78 8.6 1 7 2 12 25. 214L-T7.5L HP 214L-T7.5L IP 8.33 9.21 1 7.5 12.9 232.6 214L-T8.L HR 214L-T8.L IR 8.89 9.83 1 8 5 13.6 22.6 214L-T8.5L HT 214L-T8.5L IT 9.44 1.43 1 8.5 25 14.4 28.4 214L-T9.L HV 214L-T9.L IV 1. 11.5 1 9 1 15.4 194.8 214L-T1L HX 214L-T1L IX 11.1 12.27 1 1 5 17 176.4 214L-T11L HZ 214L-T11L IZ 12.2 13.5 1 11 5 18.2 164.8 214L-T12L H 214L-T12L I 13.3 14.7 1 12 5 19.9 15.6 214L-T13L HG 214L-T13L IG 14.4 15.9 1 13 5 21.5 139.4 214L-T14L HK 214L-T14L IK 15.6 17.2 1 14 5 23.2 129.4 214L-T15L HM 214L-T15L IM 16.7 18.5 1 15 5 24.4 123. 214L-T16L HP 214L-T16L IP 17.8 19.7 1 16 5 26 115.4 214L-T17L HR 214L-T17L IR 18.9 2.9 1 17 5 27.6 16.6 214L-T18L HT 214L-T18L IT 2. 22.1 1 18 5 29.2 12.8 214L-T2L HV 214L-T2L IV 22.2 24.5 1 2 5 32.4 92.6 214L-T22L HX 214L-T22L IX 24.4 27. 1 22 5 35.5 84.4 214L-T24L HZ 214L-T24L IZ 26.7 29.5 1 24 5 38.9 77.2 214L-T26L H 214L-T26L I 28.9 31.9 1 26 5 42.1 71.2 214L-T28L HG 214L-T28L IG 31.1 34.4 1 28 5 45.4 66. 214L-T3L HK 214L-T3L IK 33.3 36.8 1 3 5 48.4 62. 214L-T33L HM 214L-T33L IM 36.7 4.6 1 33 5 53.3 56.2 214L-T36L HP 214L-T36L IP 4. 44.2 1 36 5 58.1 51.6 214L-T4L HR 214L-T4L IR 44.4 49.1 1 4 5 64.5 46.4 214L-T43L HT 214L-T43L IT 47.8 52.8 1 43 5 69.4 43.2 214L-T45L HV 214L-T45L IV 5. 55.3 1 45 5 72.7 41.2 214L-T48L HX 214L-T48L IX 53.3 58.9 1 48 5 77.4 38.8 214L-T51L HZ 214L-T51L IZ 56.7 62.7 1 51 5 82.4 36.4 214L-T54L HG 214L-T54L IG 6. 66.3 1 54 5 87.1 34.4 214L-T58L HGG 214L-T58L IGG 64.4 71.2 1 58 5 93.6 32. 214L-T6L HGK 214L-T6L IGK 66.7 73.7 1 6 5 96.8 31. 214L-T64L HGM 214L-T64L IGM 71.1 78.6 1 64 5 13 29.2 214L-T7L HGP 214L-T7L IGP 77.8 86. 1 7 5 113 26.6 214L-T75L HGR 214L-T75L IGR 83.3 92.1 1 75 5 121 24.8 214L-T78L HGT 214L-T78L IGT 86.7 95.8 1 78 5 126 22.8 214L-T85L HGV 214L-T85L IGV 94.4 14.3 1 85 5 137 2.8 214L-T9L HGX 214L-T9L IGX. 11.5 1 9 5 146 2.6 214L-TL HGZ 214L-TL IGZ 111. 122.7 1 5 162 18.6 214L-T11L HH 214L-T11L IH 122. 134.8 1 11 5 177 16.8 214L-T12L HHG 214L-T12L IHG 133. 147. 1 12 5 193 15.6 214L-T13L HHH 214L-T13L IHH 144. 159.2 1 13 5 29 14.4 214L-T15L HHM 214L-T15L IHM 167. 184.6 1 15 5 243 12.4 214L-T16L HHP 214L-T16L IHP 178. 196.7 1 16 5 259 11.6 214L-T17L HHR 214L-T17L IHR 189. 28.9 1 17 5 275 11. Notes: 1. Suffix denotes a 5 % tolerance device. 3. or bidirectional devices with a V R of 1 volts or less, the I R limit is double. 2. Suffix denotes a 5 % tolerance bidirectional device. 4. or unidirectional devices with a V max. of 3.5 V at an I of 35,.5 Sine Wave of 8.3 ms Pulse Width. ustomers should verify actual device performance in their specific applications.
214L Transient Voltage Suppressor iode Series Product imensions Recommended Pad Layout G H imension G H SM (O-214) 6.6-7.11 (.26 -.28) 5.59-6.22 (.22 -.245) 2.92-3.18 (.115 -.125).15 -.31 (.6 -.112) 7.75-8.13 (.35 -.32).5 -.2 (.2 -.8) 2.1-2.62 (.8 -.13).76-1.52 (.3 -.6) imension (Max.) (Min.) (Min.) Physical Specifications SM (O-214) 4.69 (.185) 3.7 (.121) 1.52 (.6) IMNSIONS: (INHS) ase..molded plastic per UL lass 94V- Polarity...athode band indicates unidirectional device No cathode band indicates bidirectional device Weight...7 ounces /.21 grams IMNSIONS: (INHS) ustomers should verify actual device performance in their specific applications.
214L Transient Voltage Suppressor iode Series Rating and haracteristic urves Pulse erating urve Maximum Non-Repetitive Surge urrent Peak Pulse erating in Percent of Peak Power or urrent 75 5 25 1 x Waveform as efined by R... 25 5 75 125 15 175 2 mbient Temperature ( ) Peak orward Surge urrent (mps) 2 Pulse Width 8.3 ms Single Half Sine-Wave (J Method) 1 1 2 5 1 2 5 Number of ycles at 6 Hz Pulse Waveform Typical Junction apacitance I P, Peak Pulse urrent (%) 5 TR=1 µs T=25 TP Peak value (IRSM) Half value= IRSM 2 Pulse width (TP) is defined as that point where the peak current decays to 5 % of IPSM. 1 x waveform as defined by R... apacitance (p) idirectional Unidirectional T = 25 1. 2. 3. 4. T, Time (ms) 1 Standoff Voltage (Volts) Pulse Rating urve Steady State Power erating urve P P, Peak Power (KW) 1 1. 8. mm Lead reas T = 25 Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph.1.1 µs 1. µs 1 µs µs 1. ms 1 m TP, Pulse Width RM(V) Steady State Power issipation (W) 5. 4. 3. 2. 1. 6 Hz Resistive or Inductive Load. 25 5 75 125 15 175 2 TL, Lead Temperature ( ) ustomers should verify actual device performance in their specific applications.
214L Transient Voltage Suppressor iode Series Packaging Information The product will be dispensed in Tape and Reel format (see diagram below). P P 1 d Index Hole T 12 W 2 1 P Trailer evice Leader nd 1 pitches (min.) 1 pitches (min.) Start IMNSIONS: (INHS) W 1 irection of eed evices are packed in accordance with I standard RS-481- and specifications shown here. Item Symbol SM (O-214) arrier Width 7.22 ±.1 (.284 -.4) arrier Length 8.11 ±.1 (.319 -.4) arrier epth 2.36 ±.1 (.93 -.4) Sprocket Hole d 1.55 ±.5 (.61 -.2) Reel Outside iameter 33 (12.992) 5. Reel Inner iameter 1 MIN. (1.969) 13. ±.2 eed Hole iameter 2 (.512 -.8) Sprocket Hole Position 1.75 ±.1 (.69 -.4) Punch Hole Position 7.5 ±.1 (.295 -.4) Punch Hole Pitch P 4. ±.1 (.157 -.4) 4. ±.1 Sprocket Hole Pitch P (.157 -.4) 2. ±.1 mbossment enter P 1 (.79 -.4) Overall Tape Thickness T.3 ±.1 (.12 -.4) Tape Width W 16. ±.2 (.63 -.8) 22.4 Reel Width W 1 MX. (.882) Quantity per Reel -- 3, ustomers should verify actual device performance in their specific applications. RV. 6/11