the Basics Keep the body, Change the skin. re!nventing stand building systems

Size: px

Start display at page:

Download "the Basics Keep the body, Change the skin. re!nventing stand building systems"

Delphia King
5 years ago
Views:

1 the Basics Keep the body, Change the skin. re!nventing stand building systems

the Basics Introduction The original aluminium

both worlds: the endless possibilities of

2 the Basics Introduction The original aluminium frame system with big holes is the ultimate tool for the modern stand builder. The patented b62 frame system offers the best of both worlds: the endless possibilities of customisation, combined with the benefits of a modular, reusable system. 2

USP's The original frame with big holes bematrix frame systems enable you to create and build innovative stands without any special tools or technical equipment. The original frame system since 1993.

3 USP's The original frame with big holes bematrix frame systems enable you to create and build innovative stands without any special tools or technical equipment. The original frame system since The bematrix frame system is mounted far more quickly than a traditional profile system. Our frames are ecological and are seldom powder-coated or anodised. This makes them 100% recyclable with no loss of quality. It is also extremely lightweight and can be built without special tools. The big holes mean you can connect the frames to each other very easily and in every direction. The 62 mm matrix delivers the ultimate in modularity, with an endless number of configuration possibilities. Panels, textile or light walls are placed at the front, i.e. not in between the structural elements. This makes the system virtually invisible. Keep the body, change the skin : the frames can be reused endlessly, while the use of thin panels (3 mm) or textile reduces material usage to a minimum. 3

4 Lighting SAM Connectors Positioning pins Lighting Backlit lightbox Shelf brackets Lighting Sidelit lightbox Corner solutions Curved corner profile Connectors Manual clamp connector Baseplates 4

5 INDEX Overview of the chapters. Introduction Page 2 USP's Page 3 INDEX Page 5 Frames Standard Curved Perfect corners Doors Pages 6-10 Pages 6-7 Page 8 Page 9 Page 10 Connectors Page 11 Infills General Panels & Textile Pages Page 12 Page 13 Corner solutions Pages Covers Page 16 Baseplates Page 17 Lighting SAM celight Backlit lightbox Sidelit lightbox Pages Page 18 Page 19 Page 20 Page 21 Shelf brackets Pages References Pages

Standard All of the dimensions of the b62 frame system are based on the perfect Frames matrix of 62 62 mm.

6 Standard All of the dimensions of the b62 frame system are based on the perfect Frames matrix of mm. The width, length and height of the stands using these frames are designed and built in multiples of 62. It doesn t matter how complex the design is, the finished result is always stunning and distinctive for its pure lines. The b62 frames are able to accommodate panels, textile and just about anything else that will make your stand attractive and effective. 6

Standard The more slender b55 frame system does not have the 62 x 62 matrix, Frames but is also to handle panels and textile. Moreover it can be combined seamlessly with the 55 mm DMK frame.

7 Standard The more slender b55 frame system does not have the 62 x 62 matrix, Frames but is also to handle panels and textile. Moreover it can be combined seamlessly with the 55 mm DMK frame. The DMK frame was the very first frame type produced by bematrix. This frame is light and has short flanges, making it particularly strong. For the bematrix profile brochure, click here. b62 The perfect matrix on which the bematrix b62 system is based means that the dimensions and combinations always fit exactly, both on the design drawings and in reality. The designer can work in total freedom. Sharp and rounded corners, angled and sloping walls, indentations or T-joints, arches and curves - everything is possible. And because we also combine lighting, furniture and displays with the b62 profiles, this system gives you the complete look and feel you want. b55 You can also use panels and textile in the profiles of the b55 system. The whole frame system is light and easy to combine with the original DMK profiles. bematrix continues to invest in updating and expanding its product range. This investment further extends the service life of your investments and fits with our philosophy of sustainability, service and reliability. DMK It all began in 1993 with the revolutionary DMK frame. DMK is only suitable for panels and hence is ideal for general stands, as well as for walls without textile and for glass or acrylic glass structures. 7

8 Frames Curved bematrix standard curved frames: 6 standard radii, available in standard heights. Each height in a multiple of 55/62mm is possible, with a maximum of 3968mm. Custom made frames are possible. For the leaflet of the curved frames, click here. 8

9 Frames Perfect corners bematrix standard perfect corner frames: 4 standard dimensions, available in standard heights. Each height in a multiple of 55/62mm is possible, with a maximum of 3968mm. Custom made frames are also possible. For the leaflet of the perfect corner frames, click here. 9

10 Frames Doors The most versatile door assembly for b62 & b55/dmk. Standard width: 992mm - standard height: 1984, 2418, 2480 & 2976mm. The same assembly opens in, opens out, handle left & handle right. The d62 exterior door frame profile allows SEG attachment or hard panel infills on both sides. For the technical leaflet, click here. 10

Connectors Big hole connections The big holes

range of durable connectors is available.

11 Connectors Big hole connections The big holes mean you can connect the frames to each other very easily and in every direction. To enable these various configurations, a wide range of durable connectors is available. D30 connectors Positioning pins Slot connectors Mixed connectors 11

Infills General The bematrix system is made up of 2 main components: First of all, there is the frame, which we call the body. Then there s the infill, which we call the skin.

12 Infills General The bematrix system is made up of 2 main components: First of all, there is the frame, which we call the body. Then there s the infill, which we call the skin. The skin is what covers the structure and is the only component that changes frequently. You can work with textile, PVC panels, Dibond, wood, acrylic glass, glass, false walls and much more. The possibilities are endless, depending on your creativity. 12

13 Infills Panels & Textile Infills can be printed, have vinyl attached on them, be painted, have wall hangings, be spotlit, etc. Anything that will attract the attention of passersby and communicate quickly and effectively with them. The most common infills used in bematrix frames are panels & textile. Panels Panels are attached with hook and loop tape. The most frequently used types of panels are: Dibond Forex bematrix Panelskin For the technical leaflet on how to put panels in a frame, click here. Textile Textile infills are attached using a silicone strip. bematrix has developed a special tool for snipping the silicon strips so they run uninterruptedly over the aluminium flanges: the T-REX. For the technical leaflet on how to put textile in a frame, click here. 13

14 Corner solutions A perfect corner The finish of corners can sometimes cause a problem during the construction of a stand. To ensure a perfect end result, bematrix offers you 6 solutions to create a perfect corner. For the technical leaflet, click here. 90 POSITIONING PINS WITH ANO COVER PROFILE Holes covered by means of anodized cover profile. 90 POSITIONING PINS WITH VINYL COVER TAPE Holes covered by means of self-adhesive cover tape. SQUARE CORNER PROFILE Corner made by means of a square corner post. 14

15 CURVED CORNER PROFILE Corner made by means of a curved corner post. PERFECT CORNER FRAME Corner made with a welded 90 corner frame. The infill is a 3mm folded sandwich panel. CURVED FRAME Corner made with a welded 90 curved corner frame. 15

16 Cover solutions Different solutions to cover the frame holes 3 solutions to cover holes, for a clean and perfect finish for wide front sides: Perfect cover Aluminium cover profile with synthetic clips Vinyl cover tape Perfect cover Ideal for double walls Quick mounting by means of cover clips Elegant alternative to avoid any additional frames For the technical leaflet, click here. Aluminium profile with synthetic clips Anodized or available in any RAL colour Quick mounting by means of cover clips Reusable Vinyl cover tape White vinyl finish: paintable Easily installed by sticking on the frame after degreasing Removable without residue Available on handy rolls of 33m, no need to cut For the technical leaflet, click here. 16

17 Baseplates For stability, freestanding constructions, etc. Heavy steel base plates with our standard grey powder coating finish (including connectors for b62/b55/dmk frames). Available in different shapes and dimensions. 17

18 SAM SAM is part of the innovative range of bematrix lighting systems, that covers Lighting both accent and general lighting. The sustainable casing, with innovative structure treatment combining looks & durability, houses high-powered LEDs, that provide a high light intensity and are available in various colour temperatures. For the technical leaflet, click here S 3500 SAM LIGHT [WARM WHITE K] [INCL POWER SUPPLY & EU POWER CABLE] Luminous flux Colour temperature Power consumption Length x width x height Weight 1200lm 3500K 24W 430 x 100 x 20 mm 434g S 5000 SAM LIGHT [COLD WHITE K] [INCL POWER SUPPLY & EU POWER CABLE] Luminous flux Colour temperature Power consumption Length x width x height Weight 1200lm 5000K 24W 430 x 100 x 20 mm 434g 18

19 Lighting celight LED LED CELIGHT LED WHITE [INCL CABLE] Colour temperature Power consumption 6000K 20W For the technical leaflet, click here. 19

Back side finish with hard panels or with SEG fabric. Wall mounting possible.

20 BackLED lightbox BackLED lightbox, to be combined with the b62/b55 wall frame system. Lighting Single sided. Back side finish with hard panels or with SEG fabric. Wall mounting possible. Also suitable as stand-alone on baseplates. Uniform and bright lighting. Delivered: Plug & Play. For the technical leaflet, click here. 20

21 SideLED lightbox SideLED lightbox, to be combined with the b62/b55 wall frame system Lighting by means of big hole connections. Single sided lightbox: width 124mm. Back side finish with hard panels or with SEG fabric. Double sided lightbox: width 186mm. Wall mounting possible. Also suitable as stand-alone on baseplates. Uniform and bright lighting. Delivered: Plug & Play. (larger lightboxes easily assembled on site) For the technical leaflet, click here. 21

Shelf brackets Different shelf solutions All brackets

powdercoated with a light grain and very scratchproof.

ALU-shelf. 1 bracket fits both left and right.

901 36 SMALL G b62/dmk SMALL SHELF BRACKET SET GREY 901

22 Shelf brackets Different shelf solutions All brackets have a modern look with light grey colour (RAL9007 TEC), powdercoated with a light grain and very scratchproof. Available: 5 types of brackets, 1 support & 1 60 ALU-shelf. 1 bracket fits both left and right. For the technical leaflet, click here SMALL G b62/dmk SMALL SHELF BRACKET SET GREY LARGE G b62/dmk LARGE SHELF BRACKET SET GREY TUBE G b62/dmk SHELF & TUBE BRACKET SET GREY 22

23 SUPPORT G b62/dmk SHELF SUPPORT [0930MM] GREY TOP G b62/dmk TOP SHELF BRACKET SET GREY DEG G b62/dmk 60 SHELF BRACKET SET GREY SHELF ANO b62/dmk 60 SHELF [0985MM] ANO 23

24 the Basics References Curved frames Modex (UK) Perfect corner Next Level (BE) Pivot door E-demonstration (BE) Manual clamp connector bematrix (BE) 24

25 the Basics References Panel infills Concept Expo (BE) Textile infills E-demonstrations (BE) Corner profile Enigma (UK) Cover Ontwerpbureau Jan (BE) 25

26 the Basics References Perfect cover Modex (UK) Base plate Modex (UK) SAM Expohouse (SE) celight Modex (UK) 26

27 the Basics References BackLED lightbox Modex (UK) SideLED lightbox Clip Display (BE) For more references go to Shelf brackets bematrix (BE) 27

28 Copyright 04/2017 bematrix re!nventing stand building systems bematrix head-office Belgium Wijnendalestraat 174 B Roeselare T F

in the Picture EMPHASIZES A SELECTION OF NOVELTIES, WHICH WERE INTRODUCED IN OUR PRODUCT RANGE THIS YEAR.

JUNE 2015 in the Picture EMPHASIZES A SELECTION OF NOVELTIES, WHICH WERE INTRODUCED IN OUR PRODUCT RANGE THIS YEAR. TABLE OF CONTENTS [frames] b62 PIVOT DOOR d62 [0992 X ++++MM] ECO/GREY 4 b62 CURVED FRAME