TeamWorx. Version 6/21/17

Transcription

1 TeamWorx Version 6/21/17

2 TeamWorx

3 TeamWorx Table of Contents Table of Contents Page Laminates 4 Product Details 5-25 Worksurfaces Support Legs Laminate Support Panels 44 Brackets 45 Spine Walls Modesty Panels Cargo Hubs Cushions 67 Storage Inserts Storage Cubbies Wall Mounted Overheads Storage Cabinets Wire Channel 85 Terms and Conditions 86 Warranty 87 3

4 Laminates Standard Thermofuse Laminate Finishes (TFL) TeamWorx Black Matching Matte HPL: Arborite AAS405CAP Dove Grey Matching Matte HPL: Wilsonart D92-60 Mahogany Matching Matte HPL: Wilsonart 7122T-60 Tenino Grey Matching Matte HPL: Limited availability; call customer service Black Forest Walnut Matching Matte HPL: Pionite WX421 Witchcraft *Not an exact match Gunmetal Grey Matching Matte HPL: Nevamar S6-20-T Oil Cherry Matching Matte HPL: Pionite WC421-S Tuscan Walnut Matching Matte HPL: Arborite AAW-444-FPP Café Latte* Matching Matte HPL: Not Available Hardrock Maple Matching Matte HPL: Formica Regal White Matching Matte HPL: Arborite 550 Elegant White Yorkshire Cherry Matching Matte HPL: Pionite WC411-N Cognac Iconic Maple Spice Walnut Matching Matte HPL: Pionite HP336N Sunset Matching Matte HPL: Nevamar WM0047-T *Not an exact match Matching Matte HPL: Pionite WW561-N Premium Textured Thermofuse Laminate Finishes (TFL) Premium textured TFLs require a 10% upcharge. Add item code OP-TTFL-1. Intrigue* Matching Matte HPL: Limited availability; call customer service Iron Hemlock Loft Natural Ash* Matching Matte HPL: Pionite W163-OZ Looks Likatre Nightfall Rustic Oak* Silverwood* Matching Matte HPL: Supermatte Texture Pionite W292-OZ Matching Matte HPL: Not Available Matching Matte HPL: Limited availability; call customer service Matching Matte HPL: Limited availability; call customer service Matching Matte HPL: Formica 8842-WR Matching 2MM PVC edgebanding is available for all Standard and Premium TFL finishes shown here. *Not available in one piece tops over 96" long. High-Pressure Laminate Finishes (HPL) Pricing shown in this price list applies only to non-premium HPL s as follows: Wilsonart: Solids, Woodgrains, and Abstracts in Matte (-60) finish, Formica: Color Portfolio, Woodgrains, and Patterns in Matte (-58) finish Pionite: Solids, Woodgrains, and Abstracts in Suede (N) finish Call customer service for pricing for all other HPLs from the above companies, or for pricing for HPL from Arborite and Nevamar. Additional lead times required for HPL orders depending on material availability and order complexity. Due to engineering, HPL must be combined with a standard 2MM DeskMakers PVC edgebanding. Self-edge, thin PVC, or 3MM PVC are not available. 4

5 TeamWorx Product Details Components and Features TeamWorx offers several components and features to allow mulitple different configurations like desking, benching and private office senarios. Surface Mounted Cubbies - Cubbies provide additional storage space while enhancing workspace privacy. Worksurface Support - Worksurfaces can be supported by cargo hubs with support legs, 28" high post legs, laminate panels or open frame legs. Privacy Panels - Privacy panels are mounted to worksurfaces, and are available in a variety of materials. - Glass privacy panels can be added to the top of a spine wall. Grommets - Grommets are available in pass thru or powered options. - Multiple placement location options available. Spine Wall Panels - Made of 1-1/8" thick thermofuse laminate. - Available with and without accent panel. - Spine walls are supported by cargo hubs and worksurfaces. Cannot be used as freestanding walls. Modesty Panels - Modesty panels are available in a variety of materials. Cargo Hub Support Legs or Glides - Cargo hubs are 20" tall if resting on adjustable glides, 26" tall if resting on legs as shown or 23" tall if resting on lockable casters. Cargo Hubs - Storage is built around cargo hubs, which are open boxes that hold interchangeable storage inserts. The result is a flexible "box within a box". - To accommodate standard storage inserts, cargo hubs only come in 17", 25", 33", 49" and 65" widths. - Cargo hubs are available in 19" and 24" depths. Storage Inserts - Storage Inserts slide into open cargo hubs. - 17" deep inserts are for 19" deep cargo hubs. - 22" deep inserts are for 24" deep cargo hubs. - 13" deep inserts can be used for 19" deep cargo hubs when passing wires through. 5

6 Product Details TeamWorx Worksurfaces TeamWorx worksurfaces are 1-1/8" thick with 45 pound industrial grade particle board core and are available in multiple shapes. Worksurfaces are available in either TFL with 2MM PVC edge or HPL with 2MM PVC edge. Rectangular TX-WS01 Length Wedge TX-WS02 Length California TX-WS03 Length A Length B Depth Depth Width Depth - Depths include 19", 24", 30" and 36". - Lengths include 48" to 84" in 2" increments. - Depths include 24" and 30". - 24" tapers down to 19". - 30" tapers down to 24". - Lengths include 60" to 84" in 6" increments. Depth - Depths include 24" and 30". - Width on 24" deep is 41". - Width on 30" deep is 47". - Length A includes 84", 90" and 96". - Length B on 84" long is 60". - Length B on 90" long is 66". - Length B on 90" long is 72". Tapering Boomerang TX-WS05 Computer Corner TX-WS39, TX-WS40 Extended Computer Corner TX-WS06, TX-WS07, TX-WS08 Length Length Length 19" Depth Depth Width Width Width 12" Radius 12" Radius Depth 19" - Tapers down to 19" on ends. - Lengths include 48", 54" and 60". - Widths include 48", 54" and 60". Depth - Depths include 24" and 30". - Lengths include 48", 54" and 60". - Widths include 48", 54" and 60". - Depths include 19"/19", 24"/24" and 30"/24". - Lengths include 66", 72" and 78". - Widths include 42", 48", 54" and 60". 120 Degree TX-WS45, TX-WS46 Quarter Round TX-QRTR Bullet Peninsula TX-WS21 Length Length Length Length Depth Depth Depth - Depths include 24" and 30". - Lengths include 42", 48" and 54". - Lengths include 19", 24" and 30". - Widths include 19", 24" and 30". - Depths include 24", 30" and 36". - Lengths include 48" to 78" in 6" increments. 6

7 TeamWorx Product Details Bow End Peninsula TX-WS22 Compu-Bullet TX-WS23 P-Top TX-WS24 Length Length Length Depth Depth Width Width Depth - Depths include 24", 30" and 36". - Lengths include 48" to 78" in 6" increments. 12" Radius - Depth is 30". - Lengths include 66", 72" and 78". - Width is 42". - Widths include 36" and 42". - Depth for 36" wide is 30". - Depth for 42" wide is 36". - Lengths include 66", 72" and 78". Grommet Locations TeamWorx offers several options for grommet placement. Please reference TeamWorx Grommet Guide for locations. See website for TeamWorx grommet guide. Stiffeners TeamWorx worksurfaces are standard with external stiffeners on tops over 54" long. - Stiffener extends 13/16" below the worksurface and is inset from each end. - Stiffeners may interfer with mounting of some CPU holders and keyboard trays. - Ships separately and is field installed. EQ Centered EQ 9" O.C. 9" O.C. EQ EQ 1 Stiffener for 19", 24" and 30" worksurfaces 2 Stiffeners for 36" worksurfaces 7

8 Product Details TeamWorx Metal Worksurface Support Legs TeamWorx provides multiple options of metal support legs to provide design flexibility. Open-Frame Leg A-Frame Leg C-Frame Leg - Metal Open frame, A-Frame and C-Frame support legs are all made of 1" x 2-1/2" steel frame. - Standard in metallic silver. Contact customer service for additional colors. - 28" from underside of worksurface to bottom of leg without leveler. - Each leg has two leveling glides located at the bottom of each leg. Levelers provide 1-1/4" of adjustment. Metal Post Support Legs Corner Post Leg - Metal post support legs are all made of 2-1/2" square steel with a welded top plate. - Standard in metallic silver. Contact customer service for additional colors /4" from underside of worksurface to bottom of leg without leveler. - Each leg has one leveling glide located at the bottom of each leg. Leveler provides 1-1/2" of adjustment. Shared Post Leg Used on worksurfaces longer than 72" to provide additional floor support or to join two worksurfaces togther. 8

9 TeamWorx Product Details Laminate Support Panels Laminate End Panel End panels must be specified full width to match the depth of the worksurface. Laminate Shared Panel Used on worksurfaces longer than 72" to provide additional floor support or to join two worksurfaces togther. - Laminate support panels are all made of 1-1/8" thick TFL with PVC edge banding. - Laminate end panels all have a vertical grain direction. - Includes L-Brackets. - 28" from underside of worksurface to bottom of panel without leveler. - Each panel has two leveling glides located at the bottom of each leg. Leveler provides 1/2" of adjustment. - If laminate panels are next to a spinewall, panels must be secured to spinewall. 1" Metal Support Legs 3-3/8" High Leg Rests on cargo hub with 5" support legs to support the worksurface. Can also be used to support cubbies. 5" High Leg Raise cargo hub units 5-3/8" off of floor. Includes leveling glide with 1/2" of adjustment. 8-3/8" High Leg Rests on cargo hub with glides to support the worksurface. Can also be used to support cubbies. 9

10 Product Details TeamWorx Worksurface Brackets Worksurface Connecting Flat Bracket - Used to connect two worksurfaces togther. - Black finish only. - For 19" and 24" deep worksurfaces: 1 bracket. - For 30" and 36" deep worksurfaces: 2 brackets. 10" L- Bracket - Used to connect spine walls together, worksurfaces to spine walls, modesty panels to worksurfaces, etc. - Silver finish only. Cantilever Brackets 8" Cantilever Bracket - Used to provide support for worksurfaces between floor supports when next to spine walls. - Grey finish only. - Sold as a pair, one left hand and one right hand bracket. - For 19" and 24" deep worksurfaces 12" Cantilever Bracket - Used to provide support for worksurfaces between floor supports when next to spine walls. - Grey finish only. - Sold as a pair, one left hand and one right hand bracket. - For 30" and 36" deep worksurfaces. 24" Max 42" Max 14" O.C. 9" O.C. - Cantilever brackets should be placed no further than 24" from support leg or laminate panel. - Cannot be used as support. Support legs, laminate panels or cargo hub support required. - Maximum distance between two cantilever brackets is 42". - Cantilever brackets securing a 36" worksurface to a spine wall will require the stiffener adjacent to the spine wall to be moved from 9" to 14" on center. 10

11 TeamWorx Product Details Spine Walls - Spine walls are 1-1/8" thick material with DeskMakers standard 2MM PVC edgebanding. - Must be supported by worksurfaces with floor support, cargo hubs or cabinets. Cannot be used as a standalone wall. - Wall mounted cabinets cannot be mounted to spine walls. Cubby units can be mounted on top of spine walls. - Grain direction is always vertical. - Panel mounted tackboards can be affixed to spine wall. Glass privacy panels can be added to the top edge of spine walls. - Include concealed levelers with 1" of height adjustment. - Widths include 24" to 60" in 2" increments. Spine Wall Center Spine Wall - Spine wall center panels include dowels on left and right edges for abutting to two other spine wall panels. - Available in 36", 42" and 48" heights. - Widths include 24" to 60" in 2" increments. End Spine Wall - Spine wall end panels include dowels on one edge for abutting to one other spine wall panel. - Available in 36", 42" and 48" heights. - Widths include 24" to 60" in 2" increments. * 36" and 42" high spine walls provide personal privacy but still allow collaboration between co-workers by creating ideal sightlines, which meets the LEED IEQ requirements for seated height views. Spine Wall with Steel Accent Steel Accent Heights - 36" high spine wall has an 8" high accent. - 42" high spine wall has a 14" high accent. - 48" high spine wall has a 20" high accent. - Accent is real brushed steel and is on both sides of the spine wall panel. - Steel accent is non-magnetic. Steel can be made magnetic with upcharge. - Grain runs horizontally on steel. - HPL, whiteboard and chalkboard finishes can be added to both sides of the spine wall in place of the steel accent. 11

12 Product Details Glass and Acrylic Privacy Options TeamWorx - DeskMakers recommends ordering a modesty panel at least 12" less wide than the worksurface on which it will be mounted. Acrylic Modesty Panel - 3/16" thick acylic with frosted finish. - 12" high. - Lengths 36" to 78" in 6" increments. - Mounts with metal clips: - 48" and under = 2 clips - 50"-86" = 3 clips Framed Acrylic Modesty Panel - 3/16" thick acylic with frosted finish. - 12" high. - Frame is anodized aluminum. - Lengths 36" to 78" in 6" increments. Acrylic Combination Panel - 3/16" thick acylic with frosted finish. - 24" high. - Lengths 24" to 78" in 6" increments. - Mounts with metal caps. Acrylic Privacy Panel - 3/16" thick acylic with frosted finish. -1/4" thick translucent colored. - Heights 6" 8", 10" and 12" high. - Lengths 18" to 86" in 2" increments. - Mounts with metal clips: - 48" and under = 2 clips - 50"-86" = 3 clips Glass Privacy Panel - 1/4" thick with 12" max height. - 3/8" thick with 18" max height. - Etched finish with slight green hue. - Lengths 18" to 86" in 2" increments. - Mounts with metal clips: - 48" and under = 2 clips - 50"-86" = 3 clips Glass Privacy Panel on Spine Wall - 1/4" thick and 3/8" thick - Max height is 12" for both thicknesses - Etched finish with slight green hue. - Lengths 18" to 86" in 2" increments. - Mounts with metal clips: - 48" and under = 2 clips - 50"-86" = 3 clips * Please see the Privacy Panel and Tackboard Pricebook for additional specifications and pricing. 12

13 TeamWorx Laminate Privacy Options Product Details - DeskMakers recommends ordering a modesty panel at least 12" less wide than the worksurface on which it will be mounted. 3/4" Thick Laminate Modesty Panel - 3/4" thick TFL or HPL finish. - Edges are 2MM PVC. - 12" and 18" high. - Lengths 30" to 78" in 2" increments. - Grain runs horizontally for all sizes. - Mounts with metal L-brackets. 2" Thick Laminate Modesty Panel Laminate Combination Panel - 2" thick TFL or HPL finish. - Edges are 2MM PVC. - 18" high. - Lengths 30" to 84" in 6" increments. - Grain runs horizontally for all sizes. - Mounts with metal L-brackets. - Unit must be attached to a cargo hub or spine wall. Cannot be used with freestanding desks. - 3/4" thick TFL or HPL finish. - Edges are 2MM PVC. - 24" high. - Lengths 24" to 78" in 6" increments. - Mounts with metal cantilever brackets. 3/4" Thick Laminate Privacy Panel - 3/4" thick TFL or HPL finish. - Edges are 2MM PVC. - 6", 8", 10", 12", 15" and 18" high. - Lengths 18" to 86" in 2" increments. - Grain runs horizontally for all sizes. - Also available in whiteboard and chalkboard. - Mounts with metal clips: - 48" and under = 2 clips - 50"-86" = 3 clips Double Sided Tackboard - 1 thick with fabric on both sides. - 12, 15, 18 and 24 high. - Lengths 18" to 86" in 2" increments. - Mounts with concealed metal mounting fins. Panel Mounted Tackboard - 1/2 thick with fabric on one side. - 6, 8, 10, 12, 16, 18 and 22 high. - Lengths 18" to 86" in 2" increments. - Mounts with metal Z-Brackets. - Cannot be used indepently, must be mounted to a surface. * Please see the Privacy Panel and Tackboard Pricebook for additional specifications and pricing. 13

14 Product Details TeamWorx TeamWorx Storage Cargo Hubs and Inserts Storage is built around cargo hubs, which are open boxes that hold interchangeable storage inserts. The result is a flexible "box within a box". Grain Direction Cargo Hub Grain Direction Storage Insert Grain Direction Storage Inserts - Storage Inserts slide into open cargo hubs. - 17" deep inserts are for 19" deep cargo hubs. - 22" deep inserts are for 24" deep cargo hubs. - 13" deep inserts can be used for 19" deep cargo hubs when passing wires through. 8" Wide 16" Wide 24" Wide 32" Wide 14

15 TeamWorx Product Details Cargo Hub with Glides - 20" Tall. - Available in 19" and 24" depths. 17" Wide 25" Wide 33" Wide 49" Wide 65" Wide Cargo Hub with Metal Legs /8" Tall. - Available in 19" and 24" depths, 17" wide hub is also available in 30" depth. 17" Wide 25" Wide 33" Wide 49" Wide 65" Wide Cargo Hub with Locking Casters /4" Tall. - Available in 19" and 24" depths. 17" Wide 25" Wide 33" Wide 15

16 Product Details Storage Inserts 8" Wide 16" Wide 24" Wide 32" Wide TeamWorx Box/File TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN Box/Box/Box TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN Open Storage TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN Hinged Door TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN Cubby/File TX-IN TX-IN TX-IN TX-IN TX-IN TX-IN Box/Hinged Door TX-IN TX-IN TX-IN TX-IN Printer Roll-Out Shelf TX-IN TX-IN TX-IN TX-IN

17 TeamWorx Product Details Compatible Insert Width Combinations 17" Wide Cargo Hubs 25" Wide Cargo Hubs One 16" Two 8" 33" Wide Cargo Hubs One 24" One 16" + One 8" Three 8" One 32" Two 16" One 24" + One 8" One 16" + Two 8" 49" Wide Cargo Hubs Four 8" Two 24" Three 16" One 32" + One 16" One 32" + Two 8" One 24" + One 16" + One 8" One 24" + Three 8" One 16" + Four 8" 65" Wide Cargo Hubs Two 32" Four 16" One 32" + Two 16" One 24" + Two 16" + One 8" One 32" + One 16" + Two 8" One 32" + One 24" + One 8" Two 24" + One 16" Two 24" + Two 8" * Only box/file and open storage inserts shown for reference. All available inserts shown on page

18 Product Details TeamWorx Electrical TeamWorx TeamWorx offers two daisy-chaining power systems. - V2 System - a 4 wire, 2 circuit system that provides a cost effective solution with power bases with data knockouts. - S1 System - an 8 wire, 4 circuit system offers higher capacity, load and ground capabilities. In a daisy-chaining system, power only needs to be provided to the first station in a cluster. Then that station "passes-on" the power to the next station, which then passes it on to the next station, and so-on. Daisy-chaining systems are also considered safer and may be required in certain installations due to safety regulations. All components are UL-Listed and made in the USA. V2 System Daisy-Chain 4 Wire, 2 Circuit Interconnecting cables connect V2 power bases to each other. Hardwire or plug-in starter cables connect the V2 power bases to the building electrical and are rated for 20 amp. V2 grommets are placed directly above the power bases providing access to worksurface power outlets, data knockouts and USB. Available in black, white, silver and brushed stainless steel finishes. Multiple V2 bases are available to provide options like USB charging, outlets at worksurface, data knockouts and outlets underneath the worksurface. 18

19 TeamWorx V2 System 4 Wire, 2 Circuit Wiring Schematic Product Details Number of Units per Starter Cable Starter Cable Type Four Outlet Power Base Single Circuit Plug 4 Units 8 Units Two Circuit Hardwire Calculating Interconnecting Cable Length Center of V2 Unit to Center of V2 Unit Center to Center Dimension minus 6" = Length Using V2 System T-Junction Connector Interconnecting cables connect to the males ends of T-Junction connector Power bases or pass-thru cables connect to the female end of T-Junction connector 19

20 Product Details TeamWorx V2 System Daisy-Chain Power Base with Data 2 Power Outlets Above Surface and 2 Power Outlets Below AC-ELV2-04-C1E, AC-ELV2-04-C2E See Page 34 of the Electrical Pricebook for pricing Specifications - (2) power outlets - (2) convenience outlets below worksurface - (2) RJ-45 keystone knock outs (jacks not included) - Notch for routing wires to access outlets below - Available finish: Black (Image above for reference only) 12" 3.13" 2.17" V2 System Daisy-Chain Power Base with Data and USB 2 Power Outlets and USB Above Surface and 2 Power Outlets Below AC-ELV2-04-C1U, AC-ELV2-04-C2U See Page 34 of the Electrical Pricebook for pricing Specifications - (2) power outlets - (2) convenience outlets below worksurface - (2) 2.1A USB charging ports - (1) RJ-45 keystone knock out (jack not included) - Notch for routing wires to access outlets below - Available finish: Black (Image above for reference only) (image shown with data jack - not included) 12" 3.13" 3.08" 20

21 TeamWorx Product Details V2 System Daisy-Chain ASHRAE 90.1/Title 24 Power Base with Data and USB AC-ELV2-04-T24 See Page 34 of the Electrical Pricebook for pricing (image shown with data jack - not included) Specifications - (2) power outlets accessible above worksurfce are controlled on Circuit 1 - (2) 2.1A USB charging ports are controlled on Circuit 1 - (2) power outlets below the worksurface are not controlled on Circuit 2 - (1) knock out for data jack (not included) - Available finish: Black (Image above for reference only) V1 and V2 System Surface Grommet AC-ELV2-08 See Page 40 of the Electrical Pricebook for pricing Specifications - Hinged lid - Available finishes: Black, Silver, White and Brushed Stainless Steel 5.68" 3.39" 21

22 Product Details S1 System Daisy-Chain 8 Wire, 4 Circuit TeamWorx Interconnecting cables connect S1 power blocks to each other. Hardwire or plug-in starter cables connect the S1 System power blocks to the building electrical and are rated for 20 amp. S1 System data power paks and power blocks easily mount to the underside of the worksurface or on a spine wall allowing the power to positioned exacty where it needs to be. Power can be brought to the worksurface via pass-through grommets. 22

23 TeamWorx S1 System 8 Wire, 4 Circuit Wiring Schematic Product Details Number of Units per Starter Cable Starter Cable Type Single Sided Power Block Double Sided Power Block Single Circuit Plug 4 Units 2 Units 16 Units 8 Units Four Circuit Hardwire Calculating Interconnecting Cable Length Center of Power Block to Center of Power Block Center to Center Dimension minus 6" = Length Using S1 System 3 Way Connectors Interconnecting cables connect to the male ends of 3 way connector Power bases or pass-thru cables connect to the female end of 3 way connector 23

24 Product Details S1 System Data+Power Pak AC-ELS1-05 See Page 36 of the Electrical Pricebook for pricing TeamWorx (image shown with interface plates - not included) Specifications - (4) power outlets total - Metal mounting bracket includes (2) cutouts for interface plates (not included) - Screw holes for easy installation - Black finish - Available as: - Outlets with Circuits 1,2,3 &4 - Outlets all Circuit 1 - Title 24 with Circuits 2 & 4 controlled 11.3" 2.4" 4.5" ASHRAE 90.1/Title 24 S1 System Power Blocks AC-ELS1-04-T24C, AC-ELS1-05-T24C, AC-ELS1-08DS-T24C See Page 36 of the Electrical Pricebook for pricing (image shown with interface plates - not included) Specifications - Outlets on Circuits 2 & 4 are controlled - Outlets on Circuit 1 & 3 are not controlled - "IG" circuit 3 utility is an isolated circuit and shares neutral and ground 24

25 TeamWorx Product Details Stand Alone Electrical Non-daisy chaining, stand alone power/data units can also be used with TeamWorx stations. Stand alone power units are pre-wired wth a 15amp cord and cannot be linked together. Non-Daisy-Chaining Power Base with Data AC-ELV1-07 See Page 33 of the Electrical Pricebook for pricing Specifications - (2) power outlets - (3) convenience outlets below worksurface - (2) RJ-45 keystone knock outs (jacks not included) - Notch for routing wires to access outlets below - (1) 108" long 15amp plug cord - Available finish: Black (Image above for reference only) (image shown with data jacks - not included) Non-Daisy-Chaining Power Base with Data and USB AC-ELV1-07-USB See Page 33 of the Electrical Pricebook for pricing Specifications - (2) power outlets - (3) convenience outlets below worksurface - (2) 2.1A USB charging ports - (1) RJ-45 keystone knock out (jack not included) - Notch for routing wires to access outlets below - (1) 108" long 15amp plug cord - Available finish: Black (Image above for reference only) (image shown with data jack - not included) L-Shaped Wire Management Channel L-Shaped wire management channels are easily installed and versatile in function, providing multiple positions where wire management and concealment is required. Vertical Application Horizontal Application 25

26 Worksurfaces Rectangular Worksurface 19" Deep TeamWorx 26 Model Number Depth Length TFL (T) HPL w/pvc (H) TX-WS ? $125 $200 TX-WS ? $131 $210 TX-WS ? $139 $214 TX-WS ? $146 $218 TX-WS ? $149 $238 TX-WS ? $151 $242 TX-WS ? $155 $248 TX-WS ? $161 $257 TX-WS ? $166 $266 TX-WS ? $168 $269 TX-WS ? $170 $272 TX-WS ? $175 $281 TX-WS ? $181 $290 TX-WS ? $185 $296 TX-WS ? $190 $303 TX-WS ? $195 $312 TX-WS ? $199 $318 TX-WS ? $204 $327 TX-WS ? $207 $331 TX-WS ? $210 $336 TX-WS ? $214 $342 TX-WS ? $219 $351 TX-WS ? $225 $360 TX-WS ? $229 $366 TX-WS ? $234 $374 TX-WS ? $239 $382 TX-WS ? $243 $389 TX-WS ? $246 $394 TX-WS ? $248 $398 TX-WS ? $254 $406 TX-WS ? $258 $413 TX-WS ? $263 $420 TX-WS ? $282 $451 TX-WS ? $300 $480 TX-WS ? $319 $510 TX-WS ? $324 $518 TX-WS ? $330 $528 TX-WS ? $335 $536 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - Worksurfaces 48" and longer include an anti-sag stiffener bar which may interfere with 3rd party keyboard trays. - Spans of 72" or longer may require additional support depending on the application. - If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page 29.

27 TeamWorx Rectangular Worksurface 24" Deep Worksurfaces Model Number Depth Length TFL (T) HPL w/pvc (H) WORKSURFACES TX-WS ? $145 $231 TX-WS ? $147 $235 TX-WS ? $149 $239 TX-WS ? $162 $258 TX-WS ? $165 $264 TX-WS ? $168 $269 TX-WS ? $173 $277 TX-WS ? $180 $288 TX-WS ? $186 $298 TX-WS ? $189 $302 TX-WS ? $192 $307 TX-WS ? $198 $317 TX-WS ? $204 $326 TX-WS ? $210 $338 TX-WS ? $217 $347 TX-WS ? $224 $358 TX-WS ? $229 $366 TX-WS ? $235 $375 TX-WS ? $238 $381 TX-WS ? $241 $386 TX-WS ? $246 $394 TX-WS ? $253 $404 TX-WS ? $256 $410 TX-WS ? $258 $413 TX-WS ? $261 $417 TX-WS ? $271 $434 TX-WS ? $279 $446 TX-WS ? $286 $458 TX-WS ? $290 $464 TX-WS ? $296 $474 TX-WS ? $303 $485 TX-WS ? $309 $494 TX-WS ? $342 $547 TX-WS ? $364 $582 TX-WS ? $376 $602 TX-WS ? $383 $613 TX-WS ? $391 $626 TX-WS ? $397 $635 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - Worksurfaces 48" and longer include an anti-sag stiffener bar which may interfere with 3rd party keyboard trays. - Spans of 72" or longer may require additional support depending on the application. - If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

28 Worksurfaces Rectangular Worksurface 30" Deep TeamWorx 28 Model Number Depth Length TFL (T) HPL w/pvc (H) TX-WS ? $167 $267 TX-WS ? $169 $270 TX-WS ? $172 $275 TX-WS ? $186 $298 TX-WS ? $190 $304 TX-WS ? $193 $309 TX-WS ? $199 $318 TX-WS ? $207 $331 TX-WS ? $214 $342 TX-WS ? $217 $347 TX-WS ? $220 $352 TX-WS ? $226 $362 TX-WS ? $235 $376 TX-WS ? $241 $386 TX-WS ? $248 $398 TX-WS ? $257 $411 TX-WS ? $263 $421 TX-WS ? $272 $435 TX-WS ? $277 $443 TX-WS ? $284 $454 TX-WS ? $290 $464 TX-WS ? $294 $471 TX-WS ? $296 $474 TX-WS ? $300 $480 TX-WS ? $303 $485 TX-WS ? $311 $498 TX-WS ? $327 $523 TX-WS ? $333 $533 TX-WS ? $340 $545 TX-WS ? $347 $555 TX-WS ? $351 $562 TX-WS ? $356 $570 TX-WS ? $407 $651 TX-WS ? $439 $702 TX-WS ? $464 $743 TX-WS ? $475 $760 TX-WS ? $485 $776 TX-WS ? $492 $788 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - Worksurfaces 48" and longer include an anti-sag stiffener bar which may interfere with 3rd party keyboard trays. - Spans of 72" or longer may require additional support depending on the application. - If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page 29.

29 TeamWorx Rectangular Worksurface 36" Deep Worksurfaces Model Number Depth Length TFL (T) HPL w/pvc (H) WORKSURFACES TX-WS ? $219 $350 TX-WS ? $223 $357 TX-WS ? $242 $387 TX-WS ? $251 $402 TX-WS ? $255 $408 TX-WS ? $259 $414 TX-WS ? $269 $430 TX-WS ? $278 $445 TX-WS ? $282 $451 TX-WS ? $286 $458 TX-WS ? $294 $470 TX-WS ? $306 $490 TX-WS ? $314 $502 TX-WS ? $323 $517 TX-WS ? $334 $534 TX-WS ? $342 $547 TX-WS ? $353 $565 TX-WS ? $360 $576 TX-WS ? $369 $590 TX-WS ? $377 $603 TX-WS ? $383 $613 TX-WS ? $386 $618 TX-WS ? $389 $622 TX-WS ? $394 $630 TX-WS ? $400 $640 TX-WS ? $405 $648 TX-WS ? $426 $682 TX-WS ? $428 $685 TX-WS ? $430 $689 TX-WS ? $443 $709 TX-WS ? $451 $722 TX-WS ? $461 $737 TX-WS ? $485 $776 TX-WS ? $520 $832 TX-WS ? $536 $857 TX-WS ? $552 $883 TX-WS ? $561 $898 TX-WS ? $568 $910 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - Worksurfaces 48" and longer include two anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Spans of 72" or longer may require additional support depending on the application. - If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

30 Worksurfaces Wedge Worksurface TeamWorx Left Model Shown Model Number Depth Length TFL (T) HPL w/pvc (H) 19"deep to 24" Deep Workspace Left Model Right Model TX-WS L-? TX-WS R-? $354 $566 TX-WS L-? TX-WS R-? $383 $613 TX-WS L-? TX-WS R-? $402 $644 TX-WS L-? TX-WS R-? $470 $752 TX-WS L-? TX-WS R-? $508 $813 24"deep to 30" Deep Workspace Left Model Right Model TX-WS L-? TX-WS R-? $397 $635 TX-WS L-? TX-WS R-? $434 $694 TX-WS L-? TX-WS R-? $449 $719 TX-WS L-? TX-WS R-? $557 $892 TX-WS L-? TX-WS R-? $648 $1,037 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Spans of 72" or longer may require additional support depending on the application. - If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

31 TeamWorx California Worksurface Left Model Shown Worksurfaces WORKSURFACES Model Number 24" Deep Workspace Left Model Right Model Depth Length TFL (T) HPL w/pvc (H) TX-WS L-? TX-WS R-? $837 $1,339 TX-WS L-? TX-WS R-? $892 $1,427 TX-WS L-? TX-WS R-? $922 $1,476 30" Deep Workspace Left Model Right Model TX-WS L-? TX-WS R-? $890 $1,423 TX-WS L-? TX-WS R-? $945 $1,512 TX-WS L-? TX-WS R-? $975 $1,561 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Requires one 2.5" square leg (TX-RPST-14-SLV) in corner, see page If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page 29. Tapering Boomerang Worksurface Symmetrical Model Number Depth Length TFL (T) HPL w/pvc (H) TX-WS ? $613 $982 TX-WS ? $651 $1,040 TX-WS ? $675 $1,081 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - All units taper to 19" on outer edges. - Requires one 2.5" square leg (TX-RPST-14-SLV) in corner, see page If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

32 Worksurfaces Computer Corner Worksurface Symmetrical TeamWorx Model Number Depth Length TFL (T) HPL w/pvc (H) 24"deep Return Connection and 24" Deep Workspace TX-WS ? $529 $794 TX-WS ? $561 $843 TX-WS ? $582 $873 30"deep Return Connection and 30" Deep Workspace TX-WS ? $545 $808 TX-WS ? $579 $867 TX-WS ? $599 $899 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Requires one 2.5" square leg (TX-RPST-14-SLV) in corner, see page If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

33 TeamWorx Extended Computer Corner Worksurface Non-Symmetrical Left Model Shown Worksurfaces WORKSURFACES Model Number Depth Length TFL (T) HPL w/pvc (H) 19"deep Return Connection and 19" Deep Workspace Left Model Right Model TX-WS L-? TX-WS R-? $707 $1,130 TX-WS L-? TX-WS R-? $742 $1,186 TX-WS L-? TX-WS R-? $858 $1,373 TX-WS L-? TX-WS R-? $794 $1,271 TX-WS L-? TX-WS R-? $829 $1,327 TX-WS L-? TX-WS R-? $946 $1,513 TX-WS L-? TX-WS R-? $935 $1,495 TX-WS L-? TX-WS R-? $970 $1,552 TX-WS L-? TX-WS R-? $1,086 $1,738 TX-WS L-? TX-WS R-? $1,022 $1,636 TX-WS L-? TX-WS R-? $1,057 $1,692 TX-WS L-? TX-WS R-? $1,174 $1,878 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Requires one 2.5" square leg (TX-RPST-14-SLV) in corner, see page If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

34 Worksurfaces Extended Computer Corner Worksurface Non-Symmetrical TeamWorx Left Model Shown Model Number Depth Length TFL (T) HPL w/pvc (H) 24"deep Return Connection and 24 Deep Workspace Left Model Right Model TX-WS L-? TX-WS R-? $730 $1,168 TX-WS L-? TX-WS R-? $765 $1,225 TX-WS L-? TX-WS R-? $882 $1,411 TX-WS L-? TX-WS R-? $835 $1,336 TX-WS L-? TX-WS R-? $871 $1,393 TX-WS L-? TX-WS R-? $988 $1,580 TX-WS L-? TX-WS R-? $975 $1,561 TX-WS L-? TX-WS R-? $1,010 $1,616 TX-WS L-? TX-WS R-? $1,127 $1,803 TX-WS L-? TX-WS R-? $1,063 $1,701 TX-WS L-? TX-WS R-? $1,098 $1,756 TX-WS L-? TX-WS R-? $1,215 $1,944 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Requires one 2.5" square leg (TX-RPST-14-SLV) in corner, see page If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

35 TeamWorx Extended Computer Corner Worksurface Non-Symmetrical Left Model Shown Worksurfaces WORKSURFACES Model Number Depth Length TFL (T) HPL w/pvc (H) 24"deep Return Connection and 30" Deep Workspace Left Model Right Model TX-WS L-? TX-WS R-? $800 $1,280 TX-WS L-? TX-WS R-? $835 $1,336 TX-WS L-? TX-WS R-? $952 $1,522 TX-WS L-? TX-WS R-? $906 $1,449 TX-WS L-? TX-WS R-? $940 $1,504 TX-WS L-? TX-WS R-? $1,057 $1,692 TX-WS L-? TX-WS R-? $1,046 $1,674 TX-WS L-? TX-WS R-? $1,081 $1,729 TX-WS L-? TX-WS R-? $1,198 $1,917 TX-WS L-? TX-WS R-? $1,134 $1,813 TX-WS L-? TX-WS R-? $1,168 $1,870 TX-WS L-? TX-WS R-? $1,285 $2,056 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Requires one 2.5" square leg (TX-RPST-14-SLV) in corner, see page If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

36 Worksurfaces 120 Degree Corner Worksurface TeamWorx Model Number Depth Length TFL (T) HPL w/pvc (H) 24" Deep Workspace TX-WS ? $613 $982 TX-WS ? $789 $1,262 TX-WS ? $946 $1,513 30" Deep Workspace TX-WS ? $666 $1,066 TX-WS ? $842 $1,346 TX-WS ? $999 $1,598 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Requires one 2.5" square leg (TX-RPST-14-SLV) in corner, see page If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page 29. Quarter Round Worksurface Model Number Depth Length TFL (T) HPL w/pvc (H) TX-QRTR-1919-?? $203 $326 TX-QRTR-2424-?? $252 $402 TX-QRTR-3030-?? $310 $497 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - Requires four worksurface connecting brackets (AC-BRKT-FLAT) for $17 each. 36

37 TeamWorx Bullet Peninsula Worksurface Worksurfaces WORKSURFACES Model Number Depth Length TFL (T) HPL w/pvc (H) 24" Deep Workspace TX-WS ? $357 $572 TX-WS ? $376 $602 TX-WS ? $383 $613 TX-WS ? $412 $659 TX-WS ? $431 $690 30" Deep Workspace TX-WS ? $394 $631 TX-WS ? $417 $667 TX-WS ? $426 $681 TX-WS ? $463 $740 TX-WS ? $479 $766 36" Deep Workspace TX-WS ? $553 $884 TX-WS ? $583 $933 TX-WS ? $658 $1,054 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Spans of 72" or longer may require additional support depending on the application. - If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

38 Worksurfaces Bow End Peninsula Worksurface TeamWorx Model Number Depth Length TFL (T) HPL w/pvc (H) 24" Deep Workspace TX-WS ? $357 $572 TX-WS ? $376 $602 TX-WS ? $383 $613 TX-WS ? $412 $659 TX-WS ? $431 $690 30" Deep Workspace TX-WS ? $394 $631 TX-WS ? $417 $667 TX-WS ? $426 $681 TX-WS ? $463 $740 TX-WS ? $479 $766 36" Deep Workspace TX-WS ? $553 $884 TX-WS ? $583 $933 TX-WS ? $658 $1,054 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Spans of 72" or longer may require additional support depending on the application. - If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

39 TeamWorx Worksurfaces Compu-Bullet Worksurface Left Model Shown WORKSURFACES Model Number Depth Length TFL (T) HPL w/pvc (H) Left Model Right Model TX-WS L-? TX-WS R-? $783 $1,253 TX-WS L-? TX-WS R-? $818 $1,309 TX-WS L-? TX-WS R-? $935 $1,495 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - Worksurface depth is 30" deep and return connection is 24" deep. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Spans of 72" or longer may require additional support depending on the application. - If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page 29. P-Top Worksurface Left Model Shown Model Number Depth Length TFL (T) HPL w/pvc (H) 30" Deep Workspace Left Model Right Model TX-WS L-? TX-WS R-? $794 $1,092 TX-WS L-? TX-WS R-? $806 $1,104 TX-WS L-? TX-WS R-? $817 $1,116 36" Deep Workspace Left Model Right Model TX-WS L-? TX-WS R-? $839 $1,166 TX-WS L-? TX-WS R-? $1,005 $1,435 - TFL and HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. - All worksurfaces include anti-sag stiffener bars which may interfere with 3rd party keyboard trays. - Spans of 72" or longer may require additional support depending on the application. - If worksurface is resting on a cargo hub, support legs (TX-SLEG-02 or TX-SLEG-03) are required for each cargo hub, see page If worksurface is abutting a Spine Wall, support brackets are required, see page

40 Support Legs Metal Open Frame Support Leg TeamWorx Model Number Depth Height Price End Support TX-OLEG-19-SLV $270 TX-OLEG-24-SLV $281 TX-OLEG-30-SLV $292 TX-OLEG-36-SLV $303 TX-OLEG-38-SLV $315 TX-OLEG-48-SLV $433 TX-OLEG-60-SLV $472 Spanning Support TX-OLEG-19-SPAN-SLV $365 TX-OLEG-24-SPAN-SLV $378 TX-OLEG-30-SPAN-SLV $389 TX-OLEG-36-SPAN-SLV $405 TX-OLEG-38-SPAN-SLV $417 TX-OLEG-48-SPAN-SLV $536 TX-OLEG-60-SPAN-SLV $575 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Dimensions are nominal. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. 40

41 TeamWorx Support Legs Metal A-Frame Support Leg Model Number Depth Height Price End Support Left Model Right Model TX-ALG9-19-L-SLV TX-ALG9-19-R-SLV $262 TX-ALG9-24-L-SLV TX-ALG9-24-R-SLV $284 TX-ALG9-30-L-SLV TX-ALG9-30-R-SLV $305 SUPPORT LEGS TX-ALG9-36-L-SLV TX-ALG9-36-R-SLV $321 Spanning Support TX-ALG9-19-SPAN-SLV $455 TX-ALG9-24-SPAN-SLV $482 TX-ALG9-30-SPAN-SLV $519 TX-ALG9-36-SPAN-SLV $556 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Dimensions are nominal. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Metal C-Frame Support Leg Model Number Depth Height Price End Support TX-CLEG-19-SLV $246 TX-CLEG-24-SLV $268 TX-CLEG-30-SLV $284 TX-CLEG-36-SLV $300 Spanning Support TX-CLEG-19-SPAN-SLV $385 TX-CLEG-24-SPAN-SLV $407 TX-CLEG-30-SPAN-SLV $444 TX-CLEG-36-SPAN-SLV $471 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Dimensions are nominal. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. 41

42 Support Legs Metal Square Post Support Leg Corner Placement TeamWorx Model Number Depth Height Price TX-RPST-14-SLV /4 $114 - Constructed of steel with a powdercoat finish. Top plate is welded to column. - Includes adjustable glide. - For additional colors or chrome finish, please contact Customer Service for upcharge. Metal Square Post Support Leg Spanning Two Worksurfaces or Middle Support Model Number Depth Height Price TX-RPST-15-SLV /4 $135 - Constructed of steel with a powdercoat finish. Top plate is welded to column. - Includes adjustable glide. - For additional colors or chrome finish, please contact Customer Service for upcharge. 42

43 TeamWorx Metal Square Post Support Leg 5" High for Cargo Hub Support Support Legs Model Number Depth Height Price TX-SLEG /2 $39 - Legs are constructed of 1" wide x 1" deep steel frame with a brushed finish. - Includes one adjustable glide. SUPPORT LEGS Metal Square Post Support Leg 3-3/8" High for Worksurface or Cubby Support Model Number Depth Height Price TX-SLEG /8 $33 - Legs are constructed of 1" wide x 1" deep steel frame with a brushed finish. - Rests on cargo hub with legs in order to support a worksurface. - Can also be used to support a cubby unit resting on a cargo hub or worksurface. - Add TX-OPTN-AKIT for $7 for a set of two attachment screws to permanently affix leg to cargo hub. Metal Square Post Support Leg 8-3/8" High for Worksurface or Cubby Support Model Number Depth Height Price TX-SLEG /8 $52 - Legs are constructed of 1" wide x 1" deep steel frame with a brushed finish. - Rests on cargo hub with glides in order to support a worksurface. - Can also be used to support a cubby unit resting on a cargo hub or worksurface. - Add TX-OPTN-AKIT for $7 for a set of two attachment screws to permanently affix leg to cargo hub. 43

44 Laminate Support Panels Laminate Support Panels TeamWorx Model Number Depth Height Price TX-EPL $183 TX-EPL $203 TX-EPL $231 TX-EPL $249 TX-EPL $272 TX-EPL $295 TX-EPL $364 - Includes metal cantilever brackets and two adjustable glides. - Edges are DeskMakers standard 2MM PVC edgebanding. - Grain runs vertically. Laminate Support Half Panels Model Number Depth Height Price TX-EPL $122 TX-EPL $136 TX-EPL $145 - Includes metal mounting brackets and two adjustable glides. - Edges are DeskMakers standard 2MM PVC edgebanding. - Grain runs vertically. 44

45 TeamWorx Worksurface Connecting Flat Bracket Brackets Model Number Width Length Price AC-BRKT-FLAT 3 1/2 6 1/2 $17 - Worksurface connecting flat brackets must be specified to connect two worksurfaces together, providing required support. - Available in black finish only. - Includes required wood screws. Worksurface Support L-Bracket Model Number Depth Height Price AC-BRKT-L 10 2 $21 - Includes required wood screws. Worksurface Cantilever Brackets 8 inch Model Number Depth Height Price AC-BRKT-C8 8 5 $37 - Extends 8" from spine wall or vertical surface. - Available in powdercoat grey finish only. - Includes required wood screws. Worksurface Cantilever Brackets 12 inch Model Number Depth Height Price AC-BRKT-C $39 - Extends 12" from spine wall or vertical surface. - Available in powdercoat grey finish only. - Includes required wood screws. 45

46 Spine Walls Spine Wall 36" High Center Panel TeamWorx Model Number Depth Height 36" High TX-SPW $303 TX-SPW $308 TX-SPW $312 TX-SPW $317 TX-SPW $321 TX-SPW $324 TX-SPW $338 TX-SPW $348 TX-SPW $356 TX-SPW $364 TX-SPW $374 TX-SPW $391 TX-SPW $403 TX-SPW $417 TX-SPW $429 TX-SPW $438 TX-SPW $444 TX-SPW $448 TX-SPW $462 TX-SPW $473 TX-SPW $491 TX-SPW $501 TX-SPW $515 - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall center panels include dowels on left and right edges for abutting to two other spine wall panels. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically. - Include concealed levelers with 1" of height adjustment. Price 46

47 TeamWorx Spine Wall 42" High Center Panel Spine Walls Model Number Depth Height 42" High TX-SPW $334 TX-SPW $338 TX-SPW $343 TX-SPW $347 TX-SPW $354 TX-SPW $364 TX-SPW $373 TX-SPW $383 TX-SPW $391 TX-SPW $401 TX-SPW $411 TX-SPW $426 TX-SPW $444 TX-SPW $456 TX-SPW $471 TX-SPW $482 TX-SPW $486 TX-SPW $492 TX-SPW $508 TX-SPW $521 TX-SPW $539 TX-SPW $553 TX-SPW $566 - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall center panels include dowels on left and right edges for abutting to two other spine wall panels. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically. - Include concealed levelers with 1" of height adjustment. Price SPINE WALLS 47

48 Spine Walls Spine Wall 48" High Center Panel TeamWorx Model Number Depth Height 48" High TX-SPW $367 TX-SPW $372 TX-SPW $376 TX-SPW $383 TX-SPW $389 TX-SPW $398 TX-SPW $410 TX-SPW $418 TX-SPW $430 TX-SPW $444 TX-SPW $453 TX-SPW $473 TX-SPW $488 TX-SPW $504 TX-SPW $521 TX-SPW $530 TX-SPW $539 TX-SPW $546 TX-SPW $560 TX-SPW $573 TX-SPW $589 TX-SPW $607 TX-SPW $622 - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall center panels include dowels on left and right edges for abutting to two other spine wall panels. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically. - Include concealed levelers with 1" of height adjustment. Price 48

49 TeamWorx Spine Wall 36" High End Panel Spine Walls Model Number Depth Height 36" High TX-SPW $285 TX-SPW $289 TX-SPW $292 TX-SPW $301 TX-SPW $304 TX-SPW $312 TX-SPW $321 TX-SPW $329 TX-SPW $338 TX-SPW $347 TX-SPW $356 TX-SPW $371 TX-SPW $385 TX-SPW $400 TX-SPW $408 TX-SPW $421 TX-SPW $428 TX-SPW $434 TX-SPW $440 TX-SPW $456 TX-SPW $474 TX-SPW $493 TX-SPW $497 - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall end panels include dowels on one edge for abutting to one other spine wall panel. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically. - Include concealed levelers with 1" of height adjustment. Price SPINE WALLS 49

50 Spine Walls Spine Wall 42" High End Panel TeamWorx Model Number Depth Height 42" High TX-SPW $315 TX-SPW $318 TX-SPW $321 TX-SPW $328 TX-SPW $336 TX-SPW $347 TX-SPW $355 TX-SPW $365 TX-SPW $374 TX-SPW $384 TX-SPW $394 TX-SPW $422 TX-SPW $426 TX-SPW $434 TX-SPW $445 TX-SPW $465 TX-SPW $472 TX-SPW $479 TX-SPW $493 TX-SPW $503 TX-SPW $517 TX-SPW $535 TX-SPW $548 - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall end panels include dowels on one edge for abutting to one other spine wall panel. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically. - Include concealed levelers with 1" of height adjustment. Price 50

51 TeamWorx Spine Wall 48" High End Panel Spine Walls Model Number Depth Height Price 48" High TX-SPW $349 TX-SPW $354 TX-SPW $358 TX-SPW $366 TX-SPW $372 TX-SPW $382 TX-SPW $392 TX-SPW $399 TX-SPW $413 TX-SPW $422 TX-SPW $435 TX-SPW $440 TX-SPW $471 TX-SPW $484 TX-SPW $500 TX-SPW $513 TX-SPW $519 TX-SPW $527 TX-SPW $539 TX-SPW $555 TX-SPW $583 TX-SPW $591 TX-SPW $604 SPINE WALLS - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall end panels include dowels on one edge for abutting to one other spine wall panel. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically. - Include concealed levelers with 1" of height adjustment. 51

52 Spine Walls Spine Wall with Steel Accent 36" High Center Panel with 8" High Accent TeamWorx Model Number Depth Height 36" High TX-SPW $431 TX-SPW $436 TX-SPW $442 TX-SPW $447 TX-SPW $451 TX-SPW $460 TX-SPW $467 TX-SPW $476 TX-SPW $484 TX-SPW $493 TX-SPW $502 TX-SPW $517 TX-SPW $531 TX-SPW $543 TX-SPW $555 TX-SPW $567 TX-SPW $576 TX-SPW $586 TX-SPW $594 TX-SPW $602 TX-SPW $616 TX-SPW $629 TX-SPW $643 - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall center panels include dowels on left and right edges for abutting to two other spine wall panels. - Accent is real brushed steel and is on both sides of the spine wall panel. - Steel accent is non-magnetic, add OP-MAGN-08 for $209 to make it magnetic. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically on TFL and horizontally on steel. - Include concealed levelers with 1" of height adjustment. Price 52

53 TeamWorx Spine Wall with Steel Accent 42" High Center Panel with 14" High Accent Spine Walls Model Number Depth Height Price 42" High TX-SPW $544 TX-SPW $549 TX-SPW $555 TX-SPW $560 TX-SPW $564 TX-SPW $574 TX-SPW $583 TX-SPW $592 TX-SPW $602 TX-SPW $612 TX-SPW $622 TX-SPW $638 TX-SPW $654 TX-SPW $666 TX-SPW $680 TX-SPW $692 TX-SPW $702 TX-SPW $712 TX-SPW $722 TX-SPW $731 TX-SPW $746 TX-SPW $763 TX-SPW $776 SPINE WALLS - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall center panels include dowels on left and right edges for abutting to two other spine wall panels. - Accent is real brushed steel and is on both sides of the spine wall panel. - Steel accent is non-magnetic, add OP-MAGN-14 for $272 to make it magnetic. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically on TFL and horizontally on steel. - Include concealed levelers with 1" of height adjustment. 53

54 Spine Walls Spine Wall with Steel Accent 48" High Center Panel with 20" High Accent TeamWorx Model Number Depth Height 48" High TX-SPW $689 TX-SPW $694 TX-SPW $699 TX-SPW $704 TX-SPW $710 TX-SPW $721 TX-SPW $731 TX-SPW $742 TX-SPW $752 TX-SPW $763 TX-SPW $774 TX-SPW $793 TX-SPW $809 TX-SPW $827 TX-SPW $837 TX-SPW $852 TX-SPW $862 TX-SPW $872 TX-SPW $882 TX-SPW $894 TX-SPW $910 TX-SPW $927 TX-SPW $944 - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall center panels include dowels on left and right edges for abutting to two other spine wall panels. - Accent is real brushed steel and is on both sides of the spine wall panel. - Steel accent is non-magnetic, add OP-MAGN-20 for $310 to make it magnetic. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically on TFL and horizontally on steel. - Include concealed levelers with 1" of height adjustment. Price 54

55 TeamWorx Spine Wall with Steel Accent 36" High End Panel with 8" High Accent Spine Walls Model Number Depth Height 36" High TX-SPW $415 TX-SPW $419 TX-SPW $424 TX-SPW $428 TX-SPW $433 TX-SPW $442 TX-SPW $449 TX-SPW $458 TX-SPW $466 TX-SPW $476 TX-SPW $485 TX-SPW $500 TX-SPW $515 TX-SPW $527 TX-SPW $539 TX-SPW $549 TX-SPW $558 TX-SPW $567 TX-SPW $575 TX-SPW $584 TX-SPW $598 TX-SPW $611 TX-SPW $626 - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall end panels include dowels on one edge for abutting to one other spine wall panel. - Accent is real brushed steel and is on both sides of the spine wall panel. - Steel accent is non-magnetic, add OP-MAGN-08 for $209 to make it magnetic. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically on TFL and horizontally on steel. - Include concealed levelers with 1" of height adjustment. Price SPINE WALLS 55

56 Spine Walls Spine Wall with Steel Accent 42" High End Panel with 14" High Accent TeamWorx Model Number Depth Height 42" High Price TX-SPW $526 TX-SPW $530 TX-SPW $536 TX-SPW $540 TX-SPW $546 TX-SPW $545 TX-SPW $565 TX-SPW $575 TX-SPW $584 TX-SPW $594 TX-SPW $604 TX-SPW $621 TX-SPW $637 TX-SPW $651 TX-SPW $664 TX-SPW $835 TX-SPW $684 TX-SPW $694 TX-SPW $704 TX-SPW $713 TX-SPW $728 TX-SPW $742 TX-SPW $758 - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall end panels include dowels on one edge for abutting to one other spine wall panel. - Accent is real brushed steel and is on both sides of the spine wall panel. - Steel accent is non-magnetic, add OP-MAGN-14 for $272 to make it magnetic. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically on TFL and horizontally on steel. - Include concealed levelers with 1" of height adjustment. 56

57 TeamWorx Spine Wall with Steel Accent 48" High End Panel with 20" High Accent Spine Walls Model Number Depth Height 48" High TX-SPW $671 TX-SPW $676 TX-SPW $683 TX-SPW $689 TX-SPW $693 TX-SPW $703 TX-SPW $713 TX-SPW $725 TX-SPW $735 TX-SPW $746 TX-SPW $756 TX-SPW $774 TX-SPW $792 TX-SPW $807 TX-SPW $821 TX-SPW $835 TX-SPW $845 TX-SPW $855 TX-SPW $865 TX-SPW $876 TX-SPW $893 TX-SPW $910 TX-SPW $926 - Spine Wall is 1-1/8" thick TFL material. - Edges are DeskMakers standard 2MM PVC edgebanding. - Spine wall end panels include dowels on one edge for abutting to one other spine wall panel. - Accent is real brushed steel and is on both sides of the spine wall panel. - Steel accent is non-magnetic, add OP-MAGN-20 for $310 to make it magnetic. - Panels must attach to a worksurface or storage unit. Cannot be used as a stand-alone wall. - Grain runs vertically on TFL and horizontally on steel. - Include concealed levelers with 1" of height adjustment. Price SPINE WALLS 57

58 Modesty Panels Unframed Frosted Acrylic Modesty Panel 12" High TeamWorx Model Number Depth Height Price TX-AMOD $261 TX-AMOD $280 TX-AMOD $301 TX-AMOD $355 TX-AMOD $375 TX-AMOD $394 TX-AMOD $415 TX-AMOD $467 - DeskMakers recommends ordering a modesty panel at least 12" less wide than the worksurface on which it will be mounted. - Ships unattached. Includes mounting hardware. - Decorative acrylic in patterns and colors are available on a per quote basis. Please contact customer service. Aluminum Framed Frosted Acrylic Modesty Panel 12" High Model Number Depth Height Price TX-GMOD $526 TX-GMOD $537 TX-GMOD $549 TX-GMOD $561 TX-GMOD $579 TX-GMOD $595 TX-GMOD $613 TX-GMOD $666 - DeskMakers recommends ordering a modesty panel at least 12" less wide than the worksurface on which it will be mounted. - Ships unattached. Includes mounting hardware. - Decorative acrylic in patterns and colors are available on a per quote basis. Please contact customer service. 58

59 TeamWorx Hanging Modesty Panel 2" Thick Modesty Panels Model Number Depth Height TFL (T) HPL w/pvc (H) TX-2MOD-1830-? $505 $808 TX-2MOD-1836-? $539 $862 TX-2MOD-1842-? $585 $937 TX-2MOD-1848-? $620 $992 TX-2MOD-1854-? $645 $1,033 TX-2MOD-1860-? $670 $1,071 TX-2MOD-1866-? $693 $1,110 TX-2MOD-1872-? $717 $1,148 TX-2MOD-1878-? $810 $1,296 TX-2MOD-1884-? $837 $1,340 - DeskMakers recommends ordering a modesty panel at least 12" less wide than the worksurface on which it will be mounted. - Ships unattached. Includes mounting hardware. - Grain runs horizontally for all sizes. - Unit must be attached to a cargo hub or spine wall. TROUGHS MODESTY PANELS 59

60 Modesty Panels Hanging Modesty Panel 3/4" Thick TeamWorx Model Number Depth Height 12" High TFL (T) HPL w/pvc (H) TX-LMOD-1230-? $107 $171 TX-LMOD-1232-? $108 $173 TX-LMOD-1234-? $109 $174 TX-LMOD-1236-? $111 $178 TX-LMOD-1238-? $112 $179 TX-LMOD-1240-? $114 $182 TX-LMOD-1242-? $117 $187 TX-LMOD-1244-? $119 $190 TX-LMOD-1246-? $120 $192 TX-LMOD-1248-? $122 $195 TX-LMOD-1250-? $124 $198 TX-LMOD-1252-? $125 $200 TX-LMOD-1254-? $128 $204 TX-LMOD-1256-? $132 $211 TX-LMOD-1258-? $137 $219 TX-LMOD-1260-? $140 $225 TX-LMOD-1262-? $142 $227 TX-LMOD-1264-? $148 $237 TX-LMOD-1266-? $152 $243 TX-LMOD-1268-? $155 $248 TX-LMOD-1270-? $159 $254 TX-LMOD-1272-? $164 $263 TX-LMOD-1274-? $169 $270 TX-LMOD-1276-? $173 $277 TX-LMOD-1278-? $181 $290 - DeskMakers recommends ordering a modesty panel at least 12" less wide than the worksurface on which it will be mounted. - Ships unattached. Includes mounting hardware. - Grain runs horizontally for all sizes. 60

61 TeamWorx Hanging Modesty Panel 3/4" Thick Modesty Panels Model Number Depth Height TFL (T) HPL w/pvc (H) 18" High TX-LMOD-1830-? $166 $266 TX-LMOD-1832-? $171 $274 TX-LMOD-1834-? $173 $277 TX-LMOD-1836-? $178 $284 TX-LMOD-1838-? $181 $290 TX-LMOD-1840-? $183 $293 TX-LMOD-1842-? $187 $299 TX-LMOD-1844-? $189 $302 TX-LMOD-1846-? $193 $309 TX-LMOD-1848-? $197 $315 TX-LMOD-1850-? $199 $318 TX-LMOD-1852-? $206 $330 TX-LMOD-1854-? $210 $336 TX-LMOD-1856-? $214 $342 TX-LMOD-1858-? $219 $350 TX-LMOD-1860-? $225 $360 TX-LMOD-1862-? $230 $368 TX-LMOD-1864-? $238 $381 TX-LMOD-1866-? $243 $389 TX-LMOD-1868-? $246 $394 TX-LMOD-1870-? $257 $411 TX-LMOD-1872-? $262 $419 TX-LMOD-1874-? $268 $429 TX-LMOD-1876-? $278 $445 TX-LMOD-1878-? $290 $464 TROUGHS MODESTY PANELS - DeskMakers recommends ordering a modesty panel at least 12" less wide than the worksurface on which it will be mounted. - Ships unattached. Includes mounting hardware. - Grain runs horizontally for all sizes. 61

62 Modesty Panels Combination Frosted Acrylic Privacy/Modesty Panel TeamWorx Model Number Depth Height 24" High AC-CMOD-2424-A $353 AC-CMOD-2430-A $406 AC-CMOD-2436-A $446 AC-CMOD-2442-A $477 AC-CMOD-2448-A $511 AC-CMOD-2454-A $547 AC-CMOD-2460-A $574 AC-CMOD-2466-A $631 AC-CMOD-2472-A $694 AC-CMOD-2478-A $799 - Acrylic material is 3/16" thick frosted glass. - DeskMakers recommends ordering a modesty panel at least 12" less wide than the worksurface on which it will be mounted. - Ships unattached. Includes mounting hardware. - Decorative acrylic in patterns and colors are available on a per quote basis. Please contact customer service. Price 62

63 TeamWorx Combination Laminate Privacy/Modesty Panel Modesty Panels Model Number Depth Height TFL (T) HPL w/pvc (H) AC-CMOD-2424-? $262 $418 AC-CMOD-2430-? $275 $440 AC-CMOD-2436-? $291 $466 AC-CMOD-2442-? $303 $486 AC-CMOD-2448-? $318 $509 AC-CMOD-2454-? $336 $538 AC-CMOD-2460-? $357 $572 AC-CMOD-2466-? $383 $613 AC-CMOD-2472-? $410 $656 AC-CMOD-2478-? $449 $718 - DeskMakers recommends ordering a modesty panel at least 12" less wide than the worksurface on which it will be mounted. - Ships unattached. Includes mounting hardware. - Grain runs horizontally for all sizes. TROUGHS MODESTY PANELS 63

64 Cargo Hubs Cargo Hub with Adjustable Glides - One Wide Model Number Width Depth Height TeamWorx Price TX-HUBG $275 TX-HUBG $300-3/4" thermofuse laminate material only. - Includes four adjustable glides. - See page 66 for option to add fabric cushion. Cargo Hub with Adjustable Glides - 1-1/2 Wide Model Number Width Depth Height Price TX-HUBG $311 TX-HUBG $348-3/4" thermofuse laminate material only. - Includes four adjustable glides. - See page 66 for option to add fabric cushion. Cargo Hub with Adjustable Glides - Two Wide Model Number Width Depth Height Price TX-HUBG $366 TX-HUBG $403-3/4" thermofuse laminate material only. - Includes six adjustable glides. - See page 66 for option to add fabric cushion. Cargo Hub with Adjustable Glides - Three Wide Model Number Width Depth Height Price TX-HUBG $416 TX-HUBG $452-3/4" thermofuse laminate material only. - Includes six adjustable glides. - See page 66 for option to add fabric cushion. Cargo Hub with Adjustable Glides - Four Wide Model Number Width Depth Height Price TX-HUBG $495 TX-HUBG $531-3/4" thermofuse laminate material only. - Includes six adjustable glides. - See page 66 for option to add fabric cushion. 64

65 TeamWorx Cargo Hubs Cargo Hub with Legs - One Wide Model Number Width Depth Height Price Cargo Hub with Legs - 1-1/2 Wide TX-HUBL $382 TX-HUBL $407 TX-HUBL $518-3/4" thermofuse laminate material only. - Includes four support legs with adjustable glides. - TX-HUBL-3017 is recommended for 36" deep worksurfaces. Can be used with 17" or 22" deep inserts. - See page 66 for option to add fabric cushion. Model Number Width Depth Height Price TX-HUBL $419 TX-HUBL $456-3/4" thermofuse laminate material only. - Includes four support legs with adjustable glides. - See page 66 for option to add fabric cushion. Cargo Hub with Legs - Two Wide Model Number Width Depth Height Price TX-HUBL $494 TX-HUBL $531-3/4" thermofuse laminate material only. - Includes five support legs with adjustable glides. - See page 66 for option to add fabric cushion. TROUGHS CARGO HUBS Cargo Hub with Legs - Three Wide Model Number Width Depth Height Price TX-HUBL $544 TX-HUBL $581-3/4" thermofuse laminate material only. - Includes five support legs with adjustable glides. - See page 66 for option to add fabric cushion. Cargo Hub with Legs - Four Wide Model Number Width Depth Height Price TX-HUBL $624 TX-HUBL $661-3/4" thermofuse laminate material only. - Includes five support legs with adjustable glides. - See page 66 for option to add fabric cushion. 65

66 Cargo Hubs TeamWorx Mobile Cargo Hubs - 19" Deep Model Number Width Depth Height Price TX-HUBW $364 TX-HUBW $390 TX-HUBW $445-3/4" thermofuse laminate material only. - Includes four locking casters. Mobile Cargo Hubs - 24" Deep Model Number Width Depth Height Price TX-HUBW $389 TX-HUBW $427 TX-HUBW $482-3/4" thermofuse laminate material only. - Includes four locking casters. 66

67 TeamWorx Cushions Cushions - 19" Deep Model Number Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 TX-FCSN-1917-GR? 17 1/ /2 $222 $280 $324 $374 TX-FCSN-1925-GR? /2 $216 $315 $364 $420 TX-FCSN-1933-GR? /2 $290 $351 $404 $466 TX-FCSN-1949-GR? 48 1/ /2 $431 $522 $600 $692 TX-FCSN-1965-GR? 64 3/ /2 $572 $692 $796 $918 - Replace '?' with fabric grade when ordering. - Mobile pedestal cushions ship attached. Cushions for non-mobile cargo hubs are affixed using factory supplied velcro. Cushions - 24" Deep Model Number Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 TX-FCSN-2417-GR? 17 1/ /2 $243 $292 $336 $385 TX-FCSN-2425-GR? /2 $272 $327 $375 $433 TX-FCSN-2433-GR? /2 $301 $362 $416 $479 TX-FCSN-2449-GR? 48 1/ /2 $447 $538 $618 $712 TX-FCSN-2465-GR? 64 3/ /2 $593 $714 $820 $944 - Replace '?' with fabric grade when ordering. - Mobile pedestal cushions ship attached. Cushions for non-mobile cargo hubs are affixed using factory supplied velcro. TROUGHS CUSHIONS Cushion Use with Cargo Hubs Cabinet Size* Cushion Full Width Cushion Partial Width Width Depth Model Number Model Number TX-FCSN-1917-GR? TX-FCSN-1925-GR? TX-FCSN-1933-GR? TX-FCSN-1917-GR? TX-FCSN-1949-GR? TX-FCSN-1925-GR? TX-FCSN-1965-GR? TX-FCSN-1933-GR? TX-FCSN-2417-GR? TX-FCSN-2425-GR? TX-FCSN-2433-GR? TX-FCSN-2417-GR? TX-FCSN-2449-GR? TX-FCSN-2425-GR? TX-FCSN-2465-GR? TX-FCSN-2433-GR? NO CUSHION AVAILABLE *Cabinet sizes listed are nominal. Actual sizes will vary. 67

68 Inserts TeamWorx Box-File Pedestal Insert Model Number 16" Wide Width Depth Height TX-IN ? $374 $524 TX-IN ? $404 $566 - Accomodates letter size filing front to back or legal size filing side to side. - Lock standard. 24" Wide TX-IN ? $491 $688 TX-IN ? $534 $747 - Accomodates letter size filing front to back or legal size filing side to side. - Lock standard. 32" Wide HPL Drawer Fronts only TX-IN ? $626 $876 TX-IN ? $681 $953 - Lateral file drawer allows for two rows front to back legal or letter filing, or one row of side to side legal filing - Lateral file drawer is the same depth in both 17" deep and 22" deep units. - Lock standard. TFL Box-Box-Box Pedestal Insert Model Number 16" Wide Width Depth Height TFL HPL Drawer Fronts only TX-IN ? $427 $598 TX-IN ? $481 $673 24" Wide TX-IN ? $518 $725 TX-IN ? $558 $781 32" Wide TX-IN ? $646 $904 TX-IN ? $698 $977 - Lock standard. 68

69 TeamWorx Inserts Open Cabinet with Adjustable Shelf Insert Model Number 8" Wide Width Depth Height TX-IN T $235 NA TX-IN T $253 NA - Please note opening is only 6-1/4" wide. 16" Wide TX-IN T $264 NA TX-IN T $270 NA TX-IN T $289 NA - Please note opening is 14-1/8" wide. - 13" deep unit can be used in a 19" deep cargo hub for passing wires through. 24" Wide TX-IN T $313 NA TX-IN T $319 NA TFL HPL TX-IN T $344 NA - Please note opening is 22" wide. - 13" deep unit can be used in a 19" deep cargo hub for passing wires through. 32" Wide TX-IN T $381 NA TX-IN T $388 NA TX-IN T $413 NA - Please note opening is 29-3/4" wide. - 13" deep unit can be used in a 19" deep cargo hub for passing wires through. TROUGHS INSERTS 69

70 Inserts TeamWorx Storage Cabinet with Adjustable Shelf Insert Right Hinge Shown Model Number 8" Wide Left Model Right Model Width Depth Height TX-IN L-? TX-IN R-? $333 $465 TX-IN L-? TX-IN R-? $340 $476 TX-IN L-? TX-IN R-? $358 $502 - Please note opening is only 6-1/4" wide. - For lock, add OP-LOCK-2 for $ " deep unit can be used in a 19" deep cargo hub for passing wires through. TFL HPL Door Fronts only Right Hinge Shown Right Hinge Shown 16" Wide Left Model TX-IN L-? TX-IN R-? $375 $526 TX-IN L-? TX-IN R-? $393 $551 - Please note opening is 14-1/8" wide. - For lock, add OP-LOCK-2 for $83. 24" Wide Left Model Right Model Right Model TX-IN L-? TX-IN R-? $412 $577 TX-IN L-? TX-IN R-? $437 $612 - Please note opening is 22" wide. - For lock, add OP-LOCK-2 for $83. Double Door Storage Cabinet with Adjustable Shelf Insert Model Number 32" Wide Width Depth Height TFL HPL Door Fronts only TX-IN ? $591 $827 TX-IN ? $646 $904 - For lock, add OP-LOCK-2 for $83. 70

71 TeamWorx Inserts Cubby-File Insert Model Number 16" Wide Width Depth Height TFL HPL Drawer Fronts only TX-IN ? $374 $486 TX-IN ? $404 $526 - Accomodates letter size filing front to back or legal size filing side to side. - Lock standard on drawer. 24" Wide TX-IN ? $491 $688 TX-IN ? $534 $747 - Accomodates letter size filing front to back or legal size filing side to side. - Lock standard on drawer. 32" Wide TX-IN ? $626 $876 TX-IN ? $681 $953 - Lateral file drawer allows for two rows front to back legal or letter filing, or one row of side to side legal filing - Lateral file drawer is the same depth in both 17" deep and 22" deep units. - Lock standard on drawer. TROUGHS INSERTS 71

72 Inserts TeamWorx Box-Storage Insert Model Number 16" Wide Left Model Right Model Width Depth Height TFL HPL Fronts only TX-IN L-? TX-IN R-? $415 $581 Right Hinge Shown TX-IN L-? TX-IN R-? $446 $625 - Please note opening is 14" wide. - Lock standard on drawer only. For lock on door, add OP-LOCK-2 for $83. 24" Wide Left Model Right Model TX-IN L-? TX-IN R-? $531 $683 Right Hinge Shown TX-IN L-? TX-IN R-? $574 $738 - Lock standard on drawer only. For lock on door, add OP-LOCK-2 for $83. Printer Cabinet with Rollout Shelf Insert Model Number 16" Wide Width Depth Height TFL HPL TX-IN T $410 NA TX-IN T $428 NA - Please note opening is 13" wide. - Opening on bottom allows for wires to pass-through. 24" Wide TX-IN T $460 NA TX-IN T $484 NA - Please note opening is 21" wide. - Opening on bottom allows for wires to pass-through. 72

73 TeamWorx Cubbies Open Worksurface Cubby Model Number No Center Partition TX-SHS $456 TX-SHS $467 TX-SHS $491 TX-SHS $526 TX-SHS $643 Center Partition Width Depth Height TX-SHS $672 TX-SHS $701 TX-SHS $730 TX-SHS $759 - Units have all 3/4" material. - For surface mounting, use support legs (TX-SLEG-02 or TX-SLEG-03) or one riser of equal size. - See page 73 for spine wall mounting option. Price TX-SHS $789 Worksurface Cubby with Sliding Glass or Acrylic Doors Model Number Width Depth Height Frosted Acrylic (A) Acid-Etched Glass (G) TROUGHS CUBBIES TX-SHS ? $789 $828 TX-SHS ? $906 $952 TX-SHS ? $946 $994 TX-SHS ? $975 $1,025 TX-SHS ? $1,004 $1,055 TX-SHS ? $1,034 $1,085 TX-SHS ? $1,063 $1,117 - Units have all 3/4" material. - For surface mounting, use support legs (TX-SLEG-02 or TX-SLEG-03) or one riser of equal size. - See page 73 for spine wall mounting option. - Decorative acrylic and glass options available on a per-quote basis. Contact customer service. 73

74 Cubbies TeamWorx Worksurface Cubby with Single Sliding Laminate Door Model Number Width Depth Height TFL HPL Doors only TX-SHS ? $736 $853 TX-SHS ? $853 $970 TX-SHS ? $882 $999 TX-SHS ? $911 $1,028 TX-SHS ? $940 $1,057 TX-SHS ? $970 $1,087 TX-SHS ? $999 $1,116 - Units have all 3/4" material. - Door is 3/4" thick and slides on a grey plastic track. - For surface mounting, use support legs (TX-SLEG-02 or TX-SLEG-03) or one riser of equal size. - See page 73 for spine wall mounting option. Worksurface Cubby with Hinged Doors Model Number Width Depth Height TFL HPL Doors only TX-SHS ? $614 $829 TX-SHS ? $657 $887 TX-SHS ? $804 $1,085 TX-SHS ? $840 $1,134 - Units have all 3/4" material. - Casing available in TFL only. Doors available in HPL. - Combine multiple units for additional width. - Full face doors are 3/4" thick. - For lock, add OP-LOCK-2 for $83. - For surface mounting, use support legs (TX-SLEG-02 or TX-SLEG-03) or one riser of equal size. - See page 73 for spine wall mounting option. 74

75 TeamWorx Cubbies Shared WorkSurface Cubby Left Model Shown Model Number Width Depth Height - Units have all 3/4" material. - Units have openings on both sides so it can be placed in center of workstations facing each other. - Add TX-OPTN-CBWB for $107 for dry erase whiteboard material on the back of one side. (Use quantity of two for both sides.) - Add TX-OPTN-CBTB-? for fabric tackboard on the back of one side, where '?' represents fabric grade. Grade 1: $230, Grade 2: $281, Grade 3: $326, Grade 4: $365. See page website for fabrics. - For surface mounting, use support legs (TX-SLEG-02 or TX-SLEG-03) or one riser of equal size. - See below for spine wall mounting option. Price Left Opening Right Opening TX-SHS L TX-SHS R $608 TX-SHS L TX-SHS R $643 TX-SHS L TX-SHS R $730 TX-SHS L TX-SHS R $759 TX-SHS L TX-SHS R $789 TX-SHS L TX-SHS R $818 TX-SHS L TX-SHS R $847 TX-SHS L TX-SHS R $876 Worksurface Riser Model Number Width Depth Height Price TX-RSR $252 TX-RSR $257 TX-RSR $269 TX-RSR $310 TX-RSR $351 TX-RSR $391 TX-RSR $438 TX-RSR $462 TX-RSR $544 TX-RSR $579 TROUGHS CUBBIES - Units have all 3/4" material. - Can be used on its own or as a support base for cubbies. - Only avaliable in TFL. Spine Wall Mounting Option for Cubbies Model Number Price TX-OPTN-CBMT $112 - Includes routing of centering notch in bottom of cubby, mounting brackets and decorative mounting screws. - Requires installers to drill into top edge of spine wall. - Any TeamWorx cubby can be mounted on a spine wall. 75

76 Wall Mounted Cabinets TeamWorx Wall Mounted Overhead Cabinet without Doors Model Number Width Depth Height Price TX-WMOO $491 TX-WMOO $509 TX-WMOO $526 TX-WMOO $643 TX-WMOO $672 - Units have all 3/4" material. - Available in TFL only. - Combine multiple units for additional width. - Includes hardware for wall mounting. Must be professionally installed. Wall Mounted Overhead Cabinet with Sliding Glass or Acrylic Doors Model Number Width Depth Height Frosted Acrylic (A) Acid-Etched Glass (G) TX-WMOS-3015-? $783 $822 TX-WMOS-3215-? $800 $840 TX-WMOS-3615-? $818 $858 TX-WMOS-4215-? $935 $982 TX-WMOS-4815-? $964 $1,012 - Units have all 3/4" material. - Casing available in TFL only. - Combine multiple units for additional width. - Includes hardware for wall mounting. Must be professionally installed. - Decorative acrylic and glass options available on a per-quote basis. Contact customer service. 76

77 TeamWorx Wall-Mounted Cabinets Wall Mounted Overhead Cabinet with Hinged Doors Model Number Width Depth Height TFL HPL Doors only TX-WMOR-3015-? $613 $828 TX-WMOR-3215-? $637 $871 TX-WMOR-3615-? $666 $899 TX-WMOR-4215-? $725 $977 TX-WMOR-4815-? $818 $1,104 - Units have all 3/4" material. - Casing available in TFL only. Doors available in HPL. - Combine multiple units for additional width. - Full face doors are 3/4" thick. - For lock, add OP-LOCK-2 for $83. - Includes hardware for wall mounting. Must be professionally installed. Wall Mounted Overhead Cabinet with Hinged Aluminum Framed Acrylic Doors Model Number Width Depth Height Price TX-WMOG $1,057 TX-WMOG $1,084 TX-WMOG $1,110 TX-WMOG $1,168 TX-WMOG $1,332 - Units have all 3/4" material. - Casing available in TFL only. - Combine multiple units for additional width. - Full face doors. - Includes hardware for wall mounting. Must be professionally installed. - Decorative acrylic and glass options available on a per-quote basis. Contact customer service. TROUGHS WALL MOUNTED CABINETS 77

78 Storage Cabinets TeamWorx Two Door Storage Cabinet with Adjustable Shelves 30" Wide Model Number 15" Deep HPL Doors only TX-SCF ? $871 $1,089 TX-SCF ? $949 $1,188 TX-SCF ? $956 $1,194 TX-SCF ? $976 $1,220 TX-SCF ? $1,059 $1,325 TX-SCF ? $1,080 $1,350 19" Deep Width Depth Height TX-SCF ? $974 $1,218 TX-SCF ? $1,070 $1,337 TX-SCF ? $1,082 $1,353 TX-SCF ? $1,129 $1,412 TX-SCF ? $1,150 $1,438 TX-SCF ? $1,194 $1,493 24" Deep TX-SCF ? $1,089 $1,361 TX-SCF ? $1,191 $1,490 TX-SCF ? $1,202 $1,503 TX-SCF ? $1,232 $1,540 TX-SCF ? $1,253 $1,566 TX-SCF ? $1,368 $1,711 - Casing available in TFL only. Doors available in HPL. - Full face doors are 3/4" thick. Hinges only open to 90 degrees. - For lock, add OP-LOCK-2 for $83. Lock placed near top of doors. - Includes five support legs with adjustable glides. TFL 78

79 TeamWorx Storage Cabinets Two Door Storage Cabinet with Vertical Divider and Adjustable Shelves 36" Wide Model Number 15" Deep Width Depth Height HPL Doors only TX-SCF ? $927 $1,158 TX-SCF ? $1,010 $1,263 TX-SCF ? $1,017 $1,271 TX-SCF ? $1,038 $1,299 TX-SCF ? $1,127 $1,409 TX-SCF ? $1,149 $1,437 19" Deep TX-SCF ? $1,037 $1,295 TX-SCF ? $1,137 $1,422 TX-SCF ? $1,150 $1,439 TX-SCF ? $1,202 $1,502 TX-SCF ? $1,223 $1,529 TX-SCF ? $1,271 $1,589 TFL 24" Deep TX-SCF ? $1,158 $1,447 TX-SCF ? $1,267 $1,584 TX-SCF ? $1,280 $1,600 TX-SCF ? $1,311 $1,639 TX-SCF ? $1,332 $1,666 TX-SCF ? $1,456 $1,820 30" Deep TX-SCF ? $1,297 $1,621 TX-SCF ? $1,419 $1,774 TX-SCF ? $1,434 $1,792 TX-SCF ? $1,468 $1,835 TX-SCF ? $1,492 $1,865 TX-SCF ? $1,631 $2,038 TROUGHS STORAGE TOWERS - Casing available in TFL only. Doors available in HPL. - Full face doors are 3/4" thick. Hinges only open to 90 degrees. - For lock, add OP-LOCK-2 for $83. Lock placed near top of doors. (Two locks required for this unit). - Includes five support legs with adjustable glides. 79

80 Storage Cabinets TeamWorx Single Door Storage Cabinet with Adjustable Shelves 16" Wide Model Number 15" Deep Left Model Right Model Width Depth Height HPL Doors only TX-SCF L-? TX-SCF R-? $653 $817 TX-SCF L-? TX-SCF R-? $712 $891 TX-SCF L-? TX-SCF R-? $717 $895 TFL Right Hinge Shown TX-SCF L-? TX-SCF R-? $733 $916 TX-SCF L-? TX-SCF R-? $794 $993 TX-SCF L-? TX-SCF R-? $810 $1,012 19" Deep Left Model TX-SCF L-? TX-SCF R-? $730 $913 TX-SCF L-? TX-SCF R-? $802 $1,002 TX-SCF L-? TX-SCF R-? $811 $1,015 TX-SCF L-? TX-SCF R-? $847 $1,059 TX-SCF L-? TX-SCF R-? $863 $1,079 TX-SCF L-? TX-SCF R-? $895 $1,120 24" Deep Left Model Right Model Right Model TX-SCF L-? TX-SCF R-? $817 $1,020 TX-SCF L-? TX-SCF R-? $893 $1,117 TX-SCF L-? TX-SCF R-? $902 $1,128 TX-SCF L-? TX-SCF R-? $925 $1,155 TX-SCF L-? TX-SCF R-? $939 $1,174 TX-SCF L-? TX-SCF R-? $1,027 $1,283 30" Deep Left Model Right Model TX-SCF L-? TX-SCF R-? $915 $1,144 TX-SCF L-? TX-SCF R-? $1,000 $1,250 TX-SCF L-? TX-SCF R-? $1,010 $1,263 TX-SCF L-? TX-SCF R-? $1,036 $1,295 TX-SCF L-? TX-SCF R-? $1,052 $1,315 TX-SCF L-? TX-SCF R-? $1,150 $1,438 - Casing available in TFL only. Doors available in HPL. - Full face doors are 3/4" thick. Hinges only open to 90 degrees. - For lock, add OP-LOCK-2 for $83. Lock placed near top of door. - Includes four support legs with adjustable glides. 80

81 TeamWorx Storage Cabinets Single Door Storage Cabinet with Adjustable Shelves 20" Wide Model Number 15" Deep Left Model Right Model Width Depth Height TFL HPL Doors only TX-SCF L-? TX-SCF R-? $715 $893 TX-SCF L-? TX-SCF R-? $779 $974 TX-SCF L-? TX-SCF R-? $783 $980 Right Hinge Shown TX-SCF L-? TX-SCF R-? $801 $1,001 TX-SCF L-? TX-SCF R-? $868 $1,086 TX-SCF L-? TX-SCF R-? $885 $1,108 19" Deep Left Model Right Model TX-SCF L-? TX-SCF R-? $799 $999 TX-SCF L-? TX-SCF R-? $876 $1,095 TX-SCF L-? TX-SCF R-? $888 $1,109 TX-SCF L-? TX-SCF R-? $926 $1,157 TX-SCF L-? TX-SCF R-? $943 $1,179 TX-SCF L-? TX-SCF R-? $980 $1,225 24" Deep Left Model Right Model TX-SCF L-? TX-SCF R-? $892 $1,116 TX-SCF L-? TX-SCF R-? $977 $1,221 TX-SCF L-? TX-SCF R-? $986 $1,232 TX-SCF L-? TX-SCF R-? $1,010 $1,263 TX-SCF L-? TX-SCF R-? $1,027 $1,284 TX-SCF L-? TX-SCF R-? $1,122 $1,403 30" Deep Left Model Right Model TX-SCF L-? TX-SCF R-? $999 $1,249 TROUGHS STORAGE TOWERS TX-SCF L-? TX-SCF R-? $1,094 $1,368 TX-SCF L-? TX-SCF R-? $1,104 $1,380 TX-SCF L-? TX-SCF R-? $1,131 $1,414 TX-SCF L-? TX-SCF R-? $1,150 $1,438 TX-SCF L-? TX-SCF R-? $1,257 $1,571 - Casing available in TFL only. Doors available in HPL. - Full face doors are 3/4" thick. Hinges only open to 90 degrees. - For lock, add OP-LOCK-2 for $83. Lock placed near top of door. - Includes four support legs with adjustable glides. 81

82 Storage Cabinets TeamWorx Single Door Storage Cabinet with Adjustable Shelves 24" Wide Model Number 15" Deep Left Model Right Model Width Depth Height HPL Doors only TX-SCF L-? TX-SCF R-? $784 $980 TX-SCF L-? TX-SCF R-? $855 $1,068 TX-SCF L-? TX-SCF R-? $859 $1,075 TFL Right Hinge Shown TX-SCF L-? TX-SCF R-? $879 $1,099 TX-SCF L-? TX-SCF R-? $954 $1,192 TX-SCF L-? TX-SCF R-? $972 $1,216 19" Deep Left Model TX-SCF L-? TX-SCF R-? $876 $1,097 TX-SCF L-? TX-SCF R-? $963 $1,203 TX-SCF L-? TX-SCF R-? $974 $1,217 TX-SCF L-? TX-SCF R-? $1,017 $1,271 TX-SCF L-? TX-SCF R-? $1,035 $1,294 TX-SCF L-? TX-SCF R-? $1,075 $1,344 24" Deep Left Model Right Model Right Model TX-SCF L-? TX-SCF R-? $980 $1,225 TX-SCF L-? TX-SCF R-? $1,072 $1,340 TX-SCF L-? TX-SCF R-? $1,080 $1,353 TX-SCF L-? TX-SCF R-? $1,109 $1,386 TX-SCF L-? TX-SCF R-? $1,128 $1,410 TX-SCF L-? TX-SCF R-? $1,232 $1,540 30" Deep Left Model Right Model TX-SCF L-? TX-SCF R-? $1,098 $1,372 TX-SCF L-? TX-SCF R-? $1,201 $1,501 TX-SCF L-? TX-SCF R-? $1,210 $1,512 TX-SCF L-? TX-SCF R-? $1,242 $1,553 TX-SCF L-? TX-SCF R-? $1,263 $1,579 TX-SCF L-? TX-SCF R-? $1,380 $1,725 - Casing available in TFL only. Doors available in HPL. - Full face doors are 3/4" thick. Hinges only open to 90 degrees. - For lock, add OP-LOCK-2 for $83. Lock placed near top of door. - Includes four support legs with adjustable glides. 82

83 TeamWorx Storage Cabinets Segmented Personal Storage Cabinet with Cargo Hub Storage Right Model Shown with Box-File Insert INSERT NOT INCLUDED Model Number Left Model Right Model Width Depth Height TFL HPL Doors only TX-PSC L-? TX-PSC R-? $1,570 $1,838 TX-PSC L-? TX-PSC R-? $1,593 $1,862 TX-PSC L-? TX-PSC R-? $1,628 $1,896 TX-PSC L-? TX-PSC R-? $1,663 $1,931 TX-PSC L-? TX-PSC R-? $1,686 $1,955 TX-PSC L-? TX-PSC R-? $1,710 $1,978 - UNIT COMES WITH OPEN HUB ON BOTTOM LEFT OR RIGHT. ADD 16" WIDE INSERT. - Casing available in TFL only. Doors available in HPL. - All 3/4" thick material. Hinges only open to 90 degrees. - For lock, add OP-LOCK-2 for $83. Lock placed near top of door. This unit requires two locks. - Wardrobe section is 7" wide and includes hanging clothes rod. - Includes five support legs with adjustable glides. Segmented Personal Storage Cabinet with Front Opening and Cargo Hub Storage Right Model Shown with Box-File Insert INSERT NOT INCLUDED Model Number Left Model Right Model Width Depth Height TFL HPL Doors only TX-PSC L-? TX-PSC R-? $1,535 $1,785 TX-PSC L-? TX-PSC R-? $1,557 $1,809 TX-PSC L-? TX-PSC R-? $1,593 $1,844 TX-PSC L-? TX-PSC R-? $1,628 $1,878 TX-PSC L-? TX-PSC R-? $1,652 $1,902 TX-PSC L-? TX-PSC R-? $1,674 $1,926 - UNIT COMES WITH OPEN HUB ON BOTTOM LEFT OR RIGHT. ADD 16" WIDE INSERT. - Casing available in TFL only. Doors available in HPL. - All 3/4" thick material. Hinges only open to 90 degrees. - For lock, add OP-LOCK-2 for $83. Lock placed near top of door. - Wardrobe section is 7" wide and includes hanging clothes rod. - Open storage area above cargo hub insert has one adjustable shelf. - Includes five support legs with adjustable glides. TROUGHS STORAGE TOWERS 83

84 Storage Cabinets TeamWorx Single Segmented Cabinet with Cargo Hub Storage Right Hinge Shown with Box-File Insert INSERT NOT INCLUDED Model Number Left Model Right Model Width Depth Height TFL HPL Doors only TX-PSB L-? TX-PSB R-? $1,195 $1,464 TX-PSB L-? TX-PSB R-? $1,219 $1,488 TX-PSB L-? TX-PSB R-? $1,254 $1,522 TX-PSB L-? TX-PSB R-? $1,289 $1,557 TX-PSB L-? TX-PSB R-? $1,312 $1,581 TX-PSB L-? TX-PSB R-? $1,336 $1,604 - UNIT COMES WITH OPEN HUB ON BOTTOM. ADD 16" WIDE INSERT. - Casing available in TFL only. Doors available in HPL. - All 3/4" thick material. Hinges only open to 90 degrees. - For lock, add OP-LOCK-2 for $83. Lock placed near top of door. - Open storage area above cargo hub insert has one adjustable shelf. - Includes four support legs with adjustable glides. Single Segmented Cabinet with Front Opening and Cargo Hub Storage Model Number Width Depth Height TFL TX-PSB $1,161 TX-PSB $1,184 TX-PSB $1,219 TX-PSB $1,254 TX-PSB $1,277 Box-File Insert Shown INSERT NOT INCLUDED TX-PSB $1,301 - UNIT COMES WITH OPEN HUB ON BOTTOM. ADD 16" WIDE INSERT. - Casing available in TFL only. - All 3/4" thick material. - Open storage area above cargo hub insert has one adjustable shelf. - Includes four support legs with adjustable glides. 84