As long as you own it, we warrant it.

Transcription

1 SCIFICATIONS 2015

2 LIFETIME THE KRAFTMAID SIMPLICITY TM LIFETIME LITED WARRANTY LITED WARRANTY As long as you own it, we warrant it. Your KraftMaid SIMPLICITY TM cabinetry isn t just a purchase, it s an inestment. We beliee in quality craftsmanship. We also beliee that quality craftsmanship should last your lifetime, not just a set number of years. Simply put, your inestment is protected for as long as you own it. What is your warranty? Masco Cabinetry LLC, warrants its KraftMaid SIMPLICITY TM cabinetry to be free of defects in the material or workmanship for as long as they are owned by you, the original purchaser. How do you make a warranty claim? Please contact the retailer from whom you purchased the product. If the retailer is not aailable, please write to: Masco Cabinetry LLC Warranty Department P.O. Box 1055 Middlefield, Ohio USA Or call and our expert Customer Care group will gladly assist you. What does the warranty coer? Masco Cabinetry LLC, at its option, may elect to repair or to replace any KraftMaid SIMPLICITY TM product coered by this warranty. We are always innoating and actiely seeking out ways to improe our product offering and to make your life easier. As such, some replacement parts are subject to aailability, and may differ from those originally supplied. What is not coered? The natural aging or darkening of wood color, the inherent growth characteristics of, or ariation in wood. We beliee this is the beauty of nature and not a defect. Products or parts purchased without a finish. Wear and tear, damage or defects caused by misuse, abuse, negligence, alteration, non-residential use, or improper installation, storage, or handling. Finish damage as a result of prolonged exposure to tobacco smoke. To the maximum extent permitted by applicable law: This warranty does not coer indirect, special, incidental, or consequential damages, loss of use, or labor expenses in uninstalling or installing any material or parts, whether arising out of breach of warranty, breach of contract, negligence, tort, or any other legal theory, een if Masco Cabinetry LLC has been adised of the possibility thereof. Masco Cabinetry LLC disclaims responsibility of damages in excess of your purchase price. Some proinces and some states do not allow the exclusion or limitation of incidental or consequential damages, so the aboe limitation or exclusion may not apply to you. This warranty excludes all industrial, commercial and business usage, whose purchasers are hereby extended a one year limited warranty from the date of purchase, with all other terms of this warranty applying except the duration of the warranty. This warranty gies you specific legal rights, and you may also hae other rights which ary from state to state and proince to proince. This warranty is not transferable.

3 Customer Care Guidelines At KraftMaid Cabinetry, we re committed to proiding you with the ery best serice from start to finish. We re always here to help. Care and Contact Contacting Customer Care: Phone (888) Fax (888) Hours of Operation: Monday through Friday 8 a.m. to 8 p.m. EST Saturday 8 a.m. to 5 p.m. EST Sunday Closed Contact Customer Care With Questions or Concerns Associated With: Product aailability Warranty claims Order status Open Order Report issues Purchase order numbers Technical issues Return Authorizations (RAs) Reasons to Contact Your KraftMaid Field Representatie: Showroom needs Literature needs Serice issue resolution Warranty claims (should come to Customer Care initially) Design questions Any questions or issues not resoled when contacting Customer Care Promos Your 24/7 access to order tracking, promotional updates, design ideas, trends, 2020 info, training and more! Click and discoer Login Information: Ordering Process EDI (Electronic Data Interchange): EDI orders are placed from the store in 20/20. Once the designer enters the order into 20/20, it is then sent to Genesis, which creates the appropriate Purchase Order number. The PO is sent to Lowe s Corporate. After Lowe s Corporate processes the PO, it is then sent to KraftMaid Customer Care to be processed. Faxed Orders: XP Orders These are regular orders that are placed at the store leel. An XP order form is completed and faxed to the appropriate number. It can be for store or home deliery. Pricing must be included on the form. XP orders for more than $100 must hae a manager s signature. RP Orders RP orders can be placed by the designer or your KraftMaid Cabinetry Representatie. These are no charge orders that result from replacement items. This is for small items only that ship to the store, no truck shipments. Order Confirmation: Once an order has been entered by KraftMaid, the designer will receie a fax confirmation that the order was accepted, generally within 48 hours. Monitoring Your Order: Open Order Reports are faxed twice a week to all stores (Tuesday and Friday eenings) detailing all open orders for that account, regardless of whether they are in production or not. You can check the status of an order at any time by logging into and going to the Order Tracking Tab.

4 Refund/Rebill: Should you discoer a discrepancy on a price after an order has been placed, it is the policy of Lowe s Corporate that a refund and rebill be completed. The store will be responsible for completing the refund and rebill. The designer must reissue the order without the discrepancy, and the reissued order must hae a new purchase order number. How to Order Add-On Parts: Generate a new order ia XP or new PO, and reference the original PO# under endor special instructions. A fax acknowledgement will be sent when the order has been entered. Add-On Parts hae an estimated 10-day turnaround from order to ship. Track your order on or on your Open Order Report. For an order to qualify for this program, it must be for the same consumer, placed within six months of the original cabinet order deliery and include no more than six cabinets. Canceling an Order: Once an order has been put into production, it can be canceled and is subject to a restocking fee. Orders must be cancelled ia phone. Designers should document the date and time of the call, along with the Customer Care representatie that they spoke with. Once installed, cabinets cannot be returned. Deliery Deliery Process KraftMaid Cabinetry will arrange delieries by calling the consumer for home delieries or the store for in-store delieries. Orders containing six or more cabinets ship ia HMD, unless authorized by a store manager at the time the order is placed. Orders of fie cabinets or less will ship to the store unless a Home Deliery (HMD) fee is paid. If an EDI order of fie cabinets or less populates as a HMD with the customer s address, KraftMaid Cabinetry will process the order as a HMD regardless of the number of cabinets. A home deliery fee is added to the inoice on all HMD orders. Home deliery is not aailable in Alaska and Hawaii. When to Order Replacement Parts: Design error (a new PO is required). Damage as soon as it s deliered. If a customer receied the product and the packaging is isibly damaged, they can request that the drier open the package. The customer is then responsible for contacting the store for reordering if there is damage. Missing at the time of deliery. Installer error during installation (a new PO is required). A fax acknowledgement will be sent for replacement part orders. Must be within 90 days of receipt for damage, defect, or mis-built items. Return Authorization (RA): Items should be returned to the store. Must be reported within 90 days from actual deliery date. Only a portion of the order amount will be credited. Must be uninstalled. Contact Customer Care for questions or to report an RA (888) As long as they own it, we warrant it. KraftMaid SIMPLICITY cabinetry isn t just a purchase, it s an inestment. We beliee in quality craftsmanship. We also beliee that quality craftsmanship should last a lifetime, not just a set number of years. Simply put, your customer s inestment is protected as long as they own it. If you hae a customer with a warranty issue, please direct them to Customer Care at (888)

5 Table of Contents Index i i Vanity Cabinets G1 G12 Vanity Cabinets G1 G7 Door Styles A1 A8 Vanity Cabinet Accessories G8 G12 Finishes B1 B2 Office Cabinets Office Cabinets H1 H4 H1 H2 Specifications and Options C1 C8 Office Accessories H3 H4 Cabinet Specifications Construction Options C1 C2 C3 C8 Furniture Cabinets I1 I2 Wall Cabinets Wall Cabinets Peninsula Wall Cabinets Wall Corner Cabinets D1 D34 D1 D7 D8 D10 D11 D16 Panels Sheling Trays Paneling Sheling Roll-out Trays J1 J8 J1 J2 J4 J5 J8 Wall End Run Cabinets Wall Open Cabinets Wall Microwae Cabinets Wall Hoods Wall Specialty Cabinets D17 D18 D19 D20 D21 D22 D24 D25 D28 Decoratie Doors and Inserts Glass Inserts Mullion Doors K1 K4 K1 K2 K4 Wall Accessories D29 D34 Decoratie Enhancements L1 L22 Base Cabinets Base Cabinets Peninsula Base Cabinets Base Appliance Cabinets Base Corner Cabinets Asymmetrical Easy Reach Base End Run Cabinets Base Specialty Cabinets Base Accessories E1 E32 E1 E7 E8 E9 E10 E11 E12 E15 E16 E17 E18 E19 E20 E22 E23 E32 Supports and Valances L1 L2 Molding L3 L10 Molding Accents L11 L15 Decoratie Hardware L16 L22 Replacement Parts M1 20 Hardware M1 M6 Touch-up M7 M8 Door & Drawer Fronts - Part Index M9 M15 Door & Drawer Fronts - Sizes M16 M20 Table of Contents Tall Cabinets Tall Cabinets F1 F12 F1 F2 Nomenclature Index N1 N2 Tall Appliance Cabinets F3 F5 Tall Cabinet Accessories F6 F11 Table of Contents

6 Notes Notes Notes

7 ITEM 1 PAGE 1/2 Oerlay Concealed Hinges C1 A Acanthus Capital Acanthus Corbel Acanthus Insert Acanthus Onlay Aerosol Can Aged Bronze Knob Aged Bronze Pull All Plywood Construction with 1/2 End Panels L12 L13 L11 L13 M7 L18 L18 All Plywood Construction with 3/4 (Furniture) End Panels C4 Angle Cabinet Information E13 Angle Crown Molding L3 Angle Crown Molding Face-Mount L3 Angled Outside Corner Molding L6 Angled Wood Edge L8 Antique Knob L17 Antique Pull L17 Antiquity Insert K1 Asymmetrical Easy Reach E16 Asymmetrical Easy Reach Super Susan E16 Asymmetrical Easy Reach Wood Super Susan E17 B Baluster Knob Baluster Pull Bar Pull Base Blind Corner Base Blind Corner Cabinet Information Base Blind Corner Wood Lazy Susan Kit Base Built-in Microwae Cabinet Base Column Base Deep Drawer Combination Base Double Door Base Double Door Double Drawer Base Double Door w/four Trays Base Double Door w/full-width Tray Base Double Door w/two Full-Width Trays Base Double Door w/two Trays Base End Angle Base End Corner Base End Open Shelf Base End Panel Base End Panel w/stile Base Filler Base Filler Oerlay Base Filler Pull-out C4 L20 L20 L19 E13 E12 E24 E11 E29 E5 E1 E2 E3 E2 E3 E3 E18 E18 E18 E30 E30 E28 E28 E20 ITEM PAGE ITEM PAGE Base Fluted Column E29 Base Fluted Filler E28 Base Four Drawer E4 Base Full-Height Double Door E4 Base Full-Height Single Door E4 Base Microwae Cabinet w/deep Bottom Drawer E11 Base Microwae Cabinet w/deep Bottom Drawer Extended Opening E11 Base Oen Cabinet Uniersal E10 Base Pantry Pull-out E21 Base Pots and Pans Organizer Roll-out Field Installation J7 Base Pots and Pans Storage Four Drawer E5 Base Pots and Pans Storage Two Drawer E5 Base Single Door E1 Base Single Door w/full-width Tray E2 Base Single Door w/tray Diider E3 Base Single Door w/two Full-Width Trays E2 Base Spice Drawer Cabinet E21 Base Three Drawer E4 Base Top Mount Wastebasket Double Sidemount Soft-Close E22 Base Top Mount Wastebasket Full-Height Sidemount Soft-Close E22 Base Top Mount Wastebasket Single Sidemount Soft-Close E22 Base Tray Pull-out E20 Base w/pots and Pans Organizer E22 Base Wastebasket Kit E23 Base Wine Rack E21 Batten Molding L5 Beaded Paneling J1 Bistro Insert K1 C Cabinet Front Only Cabinet Specifications Canas Canas w/cocoa Glaze Center Beaded Insert Century Cup Pull Century Knob Chair Rail Chopping Block or Kit Classic Crown Molding Classic Drawer Front Classic Leg Countertop Support Coe Corbel Crescent Knob Crescent Pull Crown Molding C6 C2 B1 B1 L11 L21 L21 L9 E26 L4 C7 L14 L1 L13 L19 L20 L3 Cutlery Diider or Kit Cutting Board Door Rack Kit Cutting Center or Kit D E26 E26 E25 Decoratie Posts L15 Deep Roll-out Trays Factory Installed J6 Deep Roll-out Trays Field Installation J6 Deep Sink Base E6 Dentil Edging L5 Desk Door Cabinet Double Door H1 Desk Door Cabinet Single Door H1 Desk Double File Drawer H2 Desk Drawer Cabinet H1 Desk End Panel H3 Desk Filler H3 Desk Filler Oerlay H3 Desk Knee Drawer Cabinet H2 Desk Wastebasket H2 Diagonal Installation of Standard Tall Cabinets F11 Diagonal Installation of Standard Base Cabinets E32 Diagonal Installation of Standard Wall Cabinets D34 Doe White B1 Drop-in Range Panel E10 E Easy Reach Easy Reach Cabinet Information Easy Reach Super Susan Easy Reach Wood Super Susan Egg and Dart Edge End Block Capital End Spindle Capital F False Front Clips Fill Stick Filler Extension Fluted Filler Extension Fluted Leg Fluted Post Molding French Leg Front Shelf Clips Full Extension Drawer Runner Full Oerlay Concealed Hinges Furniture Base 84 H Furniture Book Shelf 84 H Furniture Book Shelf 90 H Furniture Book Shelf 96 H E14 E14 E15 E15 L11 L10 L10 M5 M8 D31, E29 D31, E29 L14 L10 L14 M3 M1 C1 I2 I1 I2 I2 Index Index i

8 ITEM PAGE ITEM PAGE ITEM PAGE Furniture Book Shelf Top Furniture Matching Base End Panel Furniture Matching Desk End Panel Furniture Matching Tall End Panel Furniture Matching Vanity End Panel Furniture Matching Wall End Panel Furniture Plywood Ends Furniture Shelf Rests G Ginger Ginger w/sable Glaze Glass Door Inserts Glass Insert Retainer Strip Glass Shelf Kits Glass Shelf Rests Grape Corbel Grape Onlay H Hardware Screws Heat Shield Heirloom Knob Heirloom Pull Heritage Knob Heritage Pull Hinges Bifold I1 E30 H4 F9 G10 D33 C4 M4 B1 B1 C7 M5 J2 M3 L13 L13 M4 E10 L21 L22 L20 L20 M6 Lattice Wall Vertical Lazy Susan Angle Lazy Susan Kit for Wall Angle Cabinets Library Molding M Matching Base End Panel Matching Base End Panel Mitered Matching Desk End Panel Matching Desk End Panel Mitered D19 E14 D30 L9 E30 E31 H4 H4 Matching Interior Standard Construction Viraguard C4 Matching Interior with 1/2 Plywood End Panels C5 Matching Interior with 3/4 (Furniture) End Panels on All Plywood () Orders C5 Matching Interior with 3/4 Furniture Plywood End Panels C5 Matching Tall End Panel F9 Matching Tall End Panel Mitered F9 Matching Vanity End Panel G10 Matching Vanity End Panel Mitered G10 Matching Wall End Panel D33 Matte Nickel Knob L16 Medium Football Knob L16 Mirror Cabinet Surface Mount G7 Mirror Molding L6 Mission Outside Corner L7 Multi Storage Pantry 36 Wide F2 P Paint M7 Pegged Drawer Organizer E27 Peninsula Base Blind Corner 27 Wide E13 Peninsula Base Double Door E8 Peninsula Base End Open Shelf E19 Peninsula Base Full-Height Double Door E9 Peninsula Base Full-Height Single Door E8 Peninsula Base Single Door E8 Peninsula Wall Angle D14 Peninsula Wall Blind Corner D13 Peninsula Wall Double Door 18 H D8 Peninsula Wall Double Door 21, 23 1/2 and 27 H D9 Peninsula Wall Double Door 30 and 33 H D9 Peninsula Wall Double Door 36 H D10 Peninsula Wall Double Door 39 and 42 H D10 Peninsula Wall Single Door 18 H D8 Peninsula Wall Single Door 23 1/2 H D8 Peninsula Wall Single Door 30 and 33 H D9 Peninsula Wall Single Door 36 H D9 Peninsula Wall Single Door 39 and 42 H D10 Peppercorn B1 Permaset Bumpers M4 Plain Post Molding L10 Plain Square Posts L15 Plywood Ends C3 Praline B1 Prepared for Glass K1 Hinges Partial Or Full Oerlay Easy Reach I M6 N Narrow Batten Molding Natural L5 B1 Q Quarter Round Molding L7 Increased Depth C6 Inset Light Rail Inside Corner Molding Installation Screws Iy Insert L5 L5 M4 L11 O Ogee Edging Ogee Pilaster Oil Rubbed Bronze Pull L6 L9 L16 R Recessed Toe Kick Recessed Toe Kick Peninsula Reduced Depth C8 C8 C6 K Knife Section Cutting Center or Kit Knife Section or Kit E25 E25 Olie Leaf Knob Olie Leaf Pull Organizers Outside Corner Molding Oal Rosette L19 L18 D27 L6 L12 Reeded Post Molding Refrigerator End Panel w/stile Replacement Sheling Base Replacement Sheling Vanity Replacement Sheling Walls L10 F8 J3 J4 J3 Index L Large Coe Molding Large Crown Molding Large Outside Corner Molding Large Rope Molding Lattice Wall Horizontal L4 L4 L6 L7 D19 Oen Cabinet Double Extended Opening w/3 Stiles F4 Oen Cabinet Double w/3 Stiles F4 Oen Cabinet Single w/3 Stiles F3 Oen Cabinet Uniersal F5 Replacement Wastebasket Roll-out Tray Diided Kit Field Installation Roll-out Tray Field Installation Chart Roll-out Trays Factory Installed Roll-out Trays Field Installation Rope Molding Rosette Rosette Corbel E23 J7 J5 J5 J6 L7 L12 L14 ii Index

9 ITEM PAGE ITEM PAGE ITEM PAGE ROT Mounting Block Kit Saddle S Sail Knob Sail Pull Satin Chrome 5 Center Pull Satin Nickel Tapered Bow Pull S.Cayden Scribe Molding S.Deeron S.Durham S.Fox Ridge S.Gentry Shelf Clips Shelf Kits Shoe Molding Showcase Mullion Sidemount Drawer Runners Single Bead Edging Sink Base Angle Sink Base Door Storage Unit or Kit Sink Base Multi-Storage Cabinet Sink Base Multi-Storage Shelf Kit Sink Base Plastic Bag Door Storage Unit or Kit Sink Front Sink Front Angle Sliding Towel Bar S.Malibu Small Coe Molding Small Grape Ornament Soffit Crown Molding Soft-Close Base Pantry Pull-Out Runners Soft-Close Drawer Clips Soft-Close Drawer Runners M1 B1 L21 L21 L16 L17 A1 L8 A2 A3 A4 A5 M3 J2 L8 K2 M1 L8 E7 E27 E6 E24 E27 E7 E7 E28 A6 L4 L12 L3 M2 M3 M2 Soft-Close Drawer Runners Two Drawer Cabinets M2 Soft-Close Hinges 1/2 Oerlay Soft-Close Hinges Face Mount Soft-Close Hinges Full Oerlay Soft-Close Vanity Base Pull-Out Runners Solid Stock Spice Drawer Cabinet Spice Drawer Insert or Kit Spice Rack Kit Stain Kit Stainless Utensil Tray or Kit Stem Glass Holder S.Templeton M5 M6 M5 M2 L9 D26 E26 D30 M7 E25 D29 A7 T Tailored Knob L17 Tailored Pull L18 Tall Acanthus Capital L12 Tall Column F7 Tall End Panel F8 Tall End Panel w/stile F8 Tall Filler F6 Tall Filler Oerlay F6 Tall Fluted Column F7 Tall Fluted Filler F7 Tambour Configurations D25 Tambour Storage 18 H D25 Tambour Storage Angle D25 Tapered Leg L14 Toe Kick E31, H4 Toe Kick F10, G10 Touch-Up Kit M8 Touch-Up Pen M8 Traditional Light Rail L4 Traditional Mullion K3 Traditional Wood Edge L8 Tri View Mirror G7 Triple Bead Edging L7 Triple Bead Molding L9 Trunk Knob L22 Trunk Pull L17 U Under Cabinet Shelf D29 Utensil Tray or Kit E24 Utility Cabinets F1 Utility Roll-out Tray F2 V Valance Contemporary L2 Valance Crown L1 Valance Furniture L1 Valance Raised Panel L2 Valance Scalloped L2 Valance Shaker L2 Valance Straight L2 Valance Traditional L1 Vanity Base Double Door G5 Vanity Base Drawer G5 Vanity Base Single Door G5 Vanity Base Top Mount Wastebasket Double G6 Vanity Bath Clearances G11 Vanity Cabinet Full-Height Door G4 Vanity Column G9 Vanity Combination Drawer (2) Vanity Combination Drawer (6) G3 G4 Vanity Combination Drawer Full False Front (4) G3 Vanity Combination Drawer Full False Front (6) G4 Vanity End Panel Vanity End Panel w/stile Vanity Filler Vanity Filler Oerlay Vanity Filler Pull-out Vanity Fluted Column Vanity Fluted Filler Vanity Knee Drawer Vanity Linen Cabinet 88 1/2 H Vanity Linen Cabinet Three Drawer Vanity Sink Base Double Door Vanity Sink Base Four Door Vanity Sink Base Three Drawer Vanity Sink Base Two Drawer Vanity Sink Front Vanity Wall Boutique Vanity Wall Cabinet Venetian Bronze Rustic Knob Venetian Bronze Victorian Leaf Pull Vertical Spice Drawer Cabinet Void All Doors and Drawer Fronts Void Doors Only W Wall Angle & Easy Reach Cabinet Information Wall Angle Deep Wall Angle 15 Deep Wall Angle Lazy Susan Wall Angle Tambour Wall Angle Tambour Lazy Susan Wall Angle Tambour Wood Lazy Susan Wall Angle Wood Lazy Susan Wall Blind Corner 36 H Wall Blind Corner 39 and 42 H Wall Blind Corner Cabinet Information Wall Blind Corner Double Door 30 H G9 G9 G8 G8 G6 G9 G8 G5 G6 G6 G1 G1 G2 G2 G2 G7 G7 L19 L19 D26 C7 C8 D13 D14 D14 D15 D15 D16 D16 D15 D12 D13 D11 D12 Wall Blind Corner Single Door 23 1/2, 30 and 33 H D12 Wall Box Wall Cabinet w/spice Rack Wall China Display 15 H Wall Column Wall Compact Microwae Shelf Wall Corner Angle Wall Double Door H Wall Double Door 15 H Wall Double Door 18 H Wall Double Door 21 and 23 1/2 H D32 D7 D19 D32 D21 D17 D1 D2 D2 D3 Index Index iii

10 ITEM PAGE ITEM PAGE ITEM PAGE Wall Double Door 27 H Wall Double Door 30 and 33 H Wall Double Door 36 H Wall Double Door 39 and 42 H Wall Easy Reach Wall End Open Shelf Wall End Panel Wall End Panel w/stile Wall Filler Wall Filler Oerlay Wall Filler Pull-out Wall Fluted Column Wall Fluted Filler Wall Hood Classic Wall Hood Classic Chimney D4 D5 D6 D6 D16 D17 D32 D33 D30 D31 D28 D32 D31 D22 D22 Wall Hood Classic Chimney Raised Panel Valance D23 Wall Hood Component Package B Recirculating D23 Wall Hood Component Package E Vented Wall Hood Component Package J Vented Wall Microwae Cabinet 36 H Wall Microwae Cabinet 45 H Wall Microwae Shelf Cabinet Wall Open Cabinet Wall Refrigerator Deep H Wall Refrigerator Deep 15 H Wall Refrigerator Deep 18 H Wall Refrigerator Deep 21 and 23 1/2 H Wall Refrigerator Deep 30 H Wall Refrigerator 24 Deep 27 H Wall Single Door 18 H Wall Single Door 23 1/2 H Wall Single Door 30 and 33 H Wall Single Door 36 H Wall Single Door 39 and 42 H Wall Wine Rack Cabinet Wastebasket Lid Wine Shelf Wine Storage Cabinet Wire Tray Diider Kit Wood Lazy Susan Angle Wood Lazy Susan Kit for Wall Angle Cabinets Wood Sink Base Wood Tiered Drawer Storage or Kit Wood Veneer Construction Wood Veneer Paneling D24 D24 D20 D20 D21 D18 D1 D2 D3 D3 D5 D4 D2 D3 D4 D5 D6 D27 E23 D29 D19 E24 E14 D30 E6 E27 C5 J1 Index i Index

11 S.Cayden Door Styles AC1C8 Cherry AC1M8 Maple Solid wood mitered door frame with 2 5/8 stiles and rails Square eneer recessed panel on wall and base doors Fie-piece drawer front Classic Drawer Front (CLDF) option aailable Full oerlay door design Concealed hinge Decoratie hardware is required Note: When CLDF option is applied, all drawer fronts will be Slab S.Cayden Specie and Finish Aailability Finish Cherry Maple Stain Ginger C88C C88M Natural NAC NAM Peppercorn PCC PCM Praline PRC PRM Saddle B81C B81M Stain w/glaze Ginger w/sable Glaze C11C C11M Paint Canas N/A CVM Doe White N/A DWM Paint w/glaze Canas w/cocoa Glaze N/A VGM Grain Solid Slab Grain Veneer Recessed Center Panel Grain Veneer Recessed Center Panel 3 1/4 to 4 1/8 5 5/8 to 14 5/8 S.Cayden A1

12 Door Styles S.Deeron LY8 Cherry MP8 Maple Solid wood door frame with 2 3/16 stiles and rails Square eneer recessed panel on wall and base doors Fie-piece drawer front Classic Drawer Front (CLDF) option aailable Full oerlay door design Concealed hinge Decoratie hardware is required Note: When CLDF option is applied, all drawer fronts will be Slab S.Deeron Specie and Finish Aailability Finish Cherry Maple Stain Ginger C88C C88M Natural NAC NAM Peppercorn PCC PCM Praline PRC PRM Saddle B81C B81M Stain w/glaze Ginger w/sable Glaze C11C C11M Paint Canas N/A CVM Doe White N/A DWM Paint w/glaze Canas w/cocoa Glaze N/A VGM Grain Solid Slab Grain Recessed Veneer Center Panel Grain Recessed Veneer Center Panel 3 ¼ 4 1/8 to 6 1/8 7 5/8 & Larger A2 S.Deeron

13 S.Durham Door Styles DRHC8 Cherry DRHM8 Maple Solid wood door frame with 3 stiles and rails Square solid recessed panel on wall and base doors Slab drawer front Full oerlay door design Concealed hinge Decoratie hardware is required S.Durham Specie and Finish Aailability Finish Cherry Maple Stain Ginger C88C C88M Natural NAC NAM Peppercorn PCC PCM Praline PRC PRM Saddle B81C B81M Stain w/glaze Ginger w/sable Glaze C11C C11M Paint Canas N/A CVM Doe White N/A DWM Paint w/glaze Canas w/cocoa Glaze N/A VGM S.Durham A3

14 Door Styles S.Fox Ridge AB9C8 Cherry Full AB9M8 Maple Full AB7C8 Cherry Half AB7M8 Maple Half Solid wood door frame with 2 3/16 stiles and rails Square eneer raised panel on wall and base doors Slab drawer front Full and 1/2 oerlay aailable Concealed hinge Decoratie hardware is required for full oerlay S.Fox Ridge Specie and Finish Aailability Finish Cherry Maple Stain Ginger C88C C88M Natural NAC NAM Peppercorn PCC PCM Praline PRC PRM Saddle B81C B81M Stain w/glaze Ginger w/sable Glaze C11C C11M Paint Canas N/A CVM Doe White N/A DWM Paint w/glaze Canas w/cocoa Glaze N/A VGM Full Oerlay 1/2 Oerlay A4 S.Fox Ridge

15 S.Gentry Door Styles 2GCS8 Cherry AC2M8 Maple Solid wood door frame with 2 3/16 stiles and rails Square eneer recessed panel on wall and base doors Slab drawer front 1/2 oerlay door design Concealed hinge Decoratie hardware is optional S.Gentry Specie and Finish Aailability Finish Cherry Maple Stain Ginger C88C C88M Natural NAC NAM Peppercorn PCC PCM Praline PRC PRM Saddle B81C B81M Stain w/glaze Ginger w/sable Glaze C11C C11M Paint Canas N/A CVM Doe White N/A DWM Paint w/glaze Canas w/cocoa Glaze N/A VGM S.Gentry A5

16 Door Styles S.Malibu AW8 Cherry ML8 Maple Solid slab on wall and base doors Slab drawer front Full oerlay door design Concealed hinge Decoratie hardware is required S.Malibu Specie and Finish Aailability Finish Cherry Maple Stain Ginger C88C C88M Natural NAC NAM Peppercorn PCC PCM Praline PRC PRM Saddle B81C B81M Paint Canas N/A CVM Doe White N/A DWM A6 S.Malibu

17 S.Templeton Door Styles AA0C8 Cherry AA0M8 Maple Solid wood mitered door frame with 2 5/8 stiles and rails Square solid raised panel on wall and base doors Drawer front aries depending on height Full oerlay door design Concealed hinge Decoratie hardware is required S.Templeton Specie and Finish Aailability Finish Cherry Maple Stain Ginger C88C C88M Natural NAC NAM Peppercorn PCC PCM Praline PRC PRM Saddle B81C B81M Stain w/glaze Ginger w/sable Glaze C11C C11M Paint Canas N/A CVM Doe White N/A DWM Paint w/glaze Canas w/cocoa Glaze N/A VGM Grain Solid Slab Grain Solid Recessed Center Panel Grain Solid Raised Center Panel Grain Solid Raised Center Panel 3 1/4 to 4 1/8 5 5/8 to 7 5/8 8 5/8 to 14 5/8 S.Templeton A7

18 Notes Door Styles A8 Notes

19 Finish Terminology - End Grain End grain surfaces and softer areas of the wood may accept more stain and often appear darker than other surfaces. This is a natural reaction when finishing wood products and potential ariances cannot be controlled. - Joint Lines Since wood is in a constant state of expansion and contraction, isible lines are normal at the joints on the cabinet face frames and doors. This does not weaken the finish or the strength of the joint. - Telegraphing All wood species show some wood grain. The amount of grain will ary by species and finish. Maple are closed or fine grain woods. Some telegraphing will occur, though the effect will be subtle. Note: Indiidual eneer doors ary in absorption of finishes and glaze hangup. Also, eneer door styles, which are usually simple door designs, may not contain as much glaze hang-up as ornate door designs. Therefore, KraftMaid recommends that a sample eneer door be iewed in the desired finish before placing a full kitchen order. Note: Based on independent testing, discoloration will occur to doors, drawers and cabinet parts after prolonged exposure to tobacco smoke. This is especially noticeable on white and other lighter finishes. Howeer, KraftMaid Cabinetry does not warranty any of its finishes against discoloration due to exposure to smoke. Warping, Cracking & Proper Humidity As a natural characteristic, all wood products contain moisture. Changes in temperature and humidity affect the moisture content in wood, which causes wood to expand or contract. Oer time, this expansion or contraction can cause warping and joint cracks to occur, potentially causing permanent deformations, in wood cabinetry. To help preent excessie moement in your wood cabinetry, we recommend maintaining a controlled enironment of 70 to 75 degrees Fahrenheit and 30% to 50% humidity in the areas where your cabinetry is stored or installed. Enironmental conditions cannot be controlled by Masco Cabinetry and the effects of the moement in wood is not considered to be a manufacturing defect and will not be considered a reason for replacement. Note: Wood products, including cabinet doors and face frames, are typically affected by enironmental conditions. Color ariation oer time, as well as normal moement due to wood s expansion and contraction is part of the natural beauty of wood. This normal moement may cause hairline cracks in the finish surface at the joints and is considered a normal characteristic of semi-opaque or painted finishes. This will not be considered a reason for product replacement. Standard Stains - Stain Finish Process Stained finishes truly showcase the natural beauty and characteristics inherent in each indiidual wood species. Based on the stain color chosen, a toner may be applied to the wood to equalize natural sap leels. The stain color is applied and hand-rubbed to ensure full and equal color coerage for doors and drawer fronts. As a final step, our oen-cured DuraKraft topcoat is applied to proide a beautiful and durable furniture finish. Finish aailability may ary by door style. See Specie and Finish Aailability Chart - Ginger A light reddish-brown stained finish with warm undertones - Natural Two coats of clear, colorless DuraKraft topcoat on unstained wood - Peppercorn A dark brown stained finish with rich black oertones - Praline A golden stained finish with yellow oertones - Saddle A cool, deep, smoky, brown stained finish that is reminiscent of walnut Premium Painted Finishes i Painted Finish Process Painted finishes feature rich, beautiful color coating the wood, adding rich depth to your selected profile. Paint is applied utilizing a spray application process. Since wood naturally expands and contracts, you may see hairline separation in the finish surface at the joints. Joint lines are normal and do not affect the strength of the door s construction. Most painted finishes are aailable only on maple due to the more uniform appearance and smooth, clean characteristics of this wood. Howeer, alternatie materials may be used in the construction of the door and drawer fronts to minimize the enironmental effects of joints and panels. As a final step, our oen-cured DuraKraft topcoat is applied to proide a beautiful and durable furniture finish. Finish aailability may ary by door style. See Specie and Finish Aailability Chart - Canas Creamy white painted finish Aailable on Maple door styles - Doe White White painted finish Aailable on Maple door styles Premium Stain w/glaze Finishes i Stain w/glaze Finish Process Glazed finishes add richness and warmth to wood surfaces. The base stain or paint finish is applied, followed by the application of a glaze finish to the entire door or drawer front to add richness and warmth to wood surfaces.* The glaze is then hand-wiped to create soft, light hang-up in profiles and recesses of the wood. A glaze highlight is hand-applied to detail the recesses of applicable door and drawer designs. Each door design, wood species and glaze finish has its own charming character and will create a unique, one-of-a-kind look. As a final step, our oen-cured DuraKraft topcoat is applied to proide a beautiful and durable furniture finish. Finish aailability may ary by door style. See Specie and Finish Aailability Chart - Ginger w/sable Glaze A light reddish-brown stained finish with rich brown glaze hang-up in corners and profile recesses Premium Paint w/glaze Finishes i Paint w/glaze Finish Process Glazed finishes add richness and warmth to wood surfaces. The base stain or paint finish is applied, followed by the application of a glaze finish to the entire door or drawer front to add richness and warmth to wood surfaces.* The glaze is then hand-wiped to create soft, light hang-up in profiles and recesses of the wood. A glaze highlight is hand-applied to detail the recesses of applicable door and drawer designs. Each door design, wood species and glaze finish has its own charming character and will create a unique, one-of-a-kind look. As a final step, our oen-cured DuraKraft topcoat is applied to proide a beautiful and durable furniture finish. Finish aailability may ary by door style. See Specie and Finish Aailability Chart - Canas w/cocoa Glaze Canas painted finish background with soft brown glaze hang-up in corners and profile recesses Aailable on Maple door styles Finishes i Natural wood characteristics such as gum pockets, streaks and pin knots may be isible, particularly with some of our lighter paints. These characteristics tend to be more pronounced on the backs of our doors and drawers. Finishes B1

20 Notes Finishes B2 Notes

21 Cabinet Specifications Construction Options and Modifications Full Oerlay Concealed Hinges 3/16 reeal 3/8 reeal Open Closed 3/16 reeal 1/2 Oerlay Concealed Hinges Open Closed 1 reeal Full Oerlay doors leae 3/8 of the cabinet s face frame exposed between doors Adjustable six-way soft-close hinges The reeals shown here may ary slightly on some cabinets due to actual door/drawer front sizes used. Refer to the replacement door and drawer section of this book for actual door/drawer sizes for specific cabinets. Note: Door styles with square outside edges cannot be opened simultaneously on adjacent cabinets because the doors will rub together. This is a common occurrence due to the sizing of full oerlay doors 1/2 oerlay doors leae 2 of the cabinet s face frame exposed between doors Adjustable six-way soft-close hinges The reeals shown here may ary slightly on some cabinets due to actual door/drawer front sizes used. Refer to the replacement door and drawer section of this book for actual door/drawer sizes for specific cabinets. Specifications and Options 1 reeal 2 reeal Concealed Hinge Cabinet Specifications C1

22 Cabinet Specifications Specifications and Options KraftMaid Cabinetry is also aailable in an All Plywood () Option. See Construction Options section for a complete description pound load capacity Concealed Hinge 3/4 four sided doetailed drawer (1) Viraguard clad back panel (2) 1/2 wood concealed hanging rail (3) 1/2 Natural Birch Viraguard clad ceiling panel (4) 3/4 solid Cherry and Maple front frame constructed using industrial grade glue and hardened steel fasteners. Front frame species complements selected door style. (5) Extensie and unique door style and wood species selection Cherry and Maple. Solid and wood eneer construction aailable. (6) Satin chrome shelf rests for all kitchen wall and furniture cabinets. Easily adjustable positie locking shelf clips for all base, tall and anity cabinets. (7) Natural Birch Viraguard interior. (8) 3/4 fully adjustable Natural Birch Viraguard clad sheling standard feature in wall, base and tall cabinets. (9) 1/2 Natural Birch Viraguard clad cabinet bottom (10) 14-step Durakraft furniture process featuring hand-wiped stain with one of the finest wood finishes aailable in the cabinet industry (11) Full-depth I-beam braces proide stability and conenient anchor points for countertop (12) 3/8 Natural Birch Viraguard clad base back panel (13) 3/4 solid wood base installation rail (14) Standard drawer runner suspension system features smooth, soft-closing, ball bearing operation with a 75 pound load capacity. (15) 3/4 full-depth solid wood doetailed drawer featuring four sided construction and 3/16 plywood bottom (16) Self-closing, concealed, wrap-around adjustable hinges (17) Full-depth, fully adjustable 3/4 Natural Birch Viraguard clad sheling (18) Drawer heads are solid hardwood or laminate to complement each door style. (19) Fully closed toe space area. I-Beam Construction 11 (20) 1/2 end panels with woodgrain Viraguard interior and matching Cherry or Maple exterior. Also aailable with optional 1/2 or 3/4 plywood end panels. Woodgrain Viraguard interior or wood eneer interior aailable. Viraguard is the tradename of our printed wood grain laminate C2 Cabinet Specifications

23 Construction Options Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Use the option aailability chart at the right of each item to determine which construction options are aailable for your desired cabinet. Material dimensions may ary slightly based on lumber industry standards. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth ID- -- Increased Depth GD -- Glass Doors RTK -- Recessed Toe Kick RTKP - Recessed Toe Kick Peninsula Specification subject to change without notice. KraftMaid Cabinetry Utilizes Some of the Best Materials Aailable to Build the Highest Quality Cabinets. At KraftMaid we continuously strie to proide products of the highest quality for all rooms of the home. In order to fulfill our commitment to quality, you may see some material changes in some of the plywood components that we use. The material changes will help reduce warping, expansion and contraction within the parts. What Is In Some Of Our Plywood? Multiple layers of wood materials, including wood eneers and medium density fiberboard (MDF), are used to create a hybrid product containing the following benefits: Improed Strength and Finish Quality: Reduces expansion or contraction, which is better for a smooth, quality finish. This process also produces a more rigid product. Enironmentally Friendly: Supports CARB II standards. (CARB, or California Air Resource Board, is a control measure for reduced formaldehyde emissions from composite wood products.) Regardless of the wood material used in the arious applications of our All Plywood Construction, you can feel confident that KraftMaid Cabinetry always uses some of the highest quality materials aailable to help ensure durable and long-lasting cabinets. Specifications and Options Note: According to the Department of Commerce, the core of hardwood and decoratie plywood consists of a layer or layers of one or more material(s) that are situated between the face and back eneers. The core may be composed of a range of materials, including but not limited to eneers, particleboard, engineered wood and medium density fiberboard (MDF). Plywood Ends l FB ID GD RTK RTKP Wood Veneer Exterior Full Kitchens B Indiidual Cabinets This construction option affects end panels only Aailable for full or partial kitchen orders 1/2 plywood end panels are aailable for most cabinets Consult the Plywood Ends () option box for your desired cabinet End panels only are 1/2 plywood with wood eneer exterior and Natural Birch Viraguard interior Sheles, ceilings and floors are engineered wood with Viraguard To order a full kitchen with Plywood Ends, use in the header of your order To order indiidual line items with Plywood Ends, dash each line item with B; Example: W3030BUTT-B Plywood End Panels do not receie glaze detailing Natural Birch Viraguard Interior Plywood ½ Construction Options C3

24 Natural Birch Wood Veneer Interior Plywood Wood Veneer Exterior ½ All Plywood Construction with 1/2 End Panels Full Kitchens This construction option affects the entire cabinet Aailable for full kitchen orders only All Plywood Construction () option with 1/2 End Panels is aailable for most cabinets Consult All Plywood Construction () option box for your desired cabinet construction This All Plywood option features: 1/2 plywood floors, ceilings, end panels, I-beams and toe kicks 3/4 plywood base, wall and tall sheles 3/8 plywood base back panel 3/16 plywood wall back panel and drawer bottoms Hanging rail may be plywood or solid wood Toe kick support blocks are not plywood To order indiidual line items with All Plywood Construction you must place those items on a separate order with in the header Plywood End Panels do not receie glaze detailing Note: To get All Plywood Construction with 3/4 (Furniture) Plywood Ends use with l FB ID GD RTK RTKP Specifications and Options Natural Birch Wood Veneer Interior Plywood Natural Birch Viraguard Interior Plywood Wood Veneer Exterior 3 / 4 Wood Veneer Exterior ¾ All Plywood Construction with 3/4 (Furniture) End Panels Indiidual Cabinets This construction option affects end panels only An All Plywood Construction with 3/4 (Furniture) End Panels option is aailable for most cabinets Consult All Plywood Furniture Construction option box () for your desired cabinet This All Plywood option features: 3/4 plywood end panels 1/2 plywood floors, ceilings, I-beams and toe kicks 3/4 plywood base, wall and tall sheles 3/8 plywood base and tall back panel 3/16 plywood wall back panel, furniture back panel and drawer bottoms Hanging rail may be plywood or solid wood Toe kick support blocks are not plywood Plywood End Panels do not receie glaze detailing Note: To get All Plywood Construction with 3/4 (Furniture) Plywood Ends use with Furniture Plywood Ends FB Indiidual Cabinets This construction option affects end panels only 3/4 Furniture Plywood End (FB) panels are aailable for most cabinets Consult Furniture Plywood Ends (FB) option box for your desired cabinet End panels only are 3/4 plywood with wood eneer exterior and Natural Birch Viraguard interior Sheles, ceilings and floors are engineered wood with Viraguard Plywood End Panels do not receie glaze detailing To order indiidual line items with Furniture Plywood Ends, dash each line item with FB; Example: W3030BUTT-FB, WEP3 30L-FB Note: To get All Plywood Construction with 3/4 (Furniture) Plywood Ends use with FB ID GD RTK RTKP ID GD RTK RTKP Matching woodgrain Viraguard interior Viraguard Exterior ½ Matching Interior Standard Construction Viraguard V Indiidual Cabinets A Matching Interior option is recommended for all cabinets haing glass doors Consult Matching Interior () option box for aailability for your desired cabinet If an item shows as standard in the option boxes, the matching interior material will be Viraguard unless that item s standard construction is All Plywood (), Wood Veneer or Furniture Plywood Ends (FB, ). Inside of face frame is unfinished This option includes: 1/2 end panels with matching Viraguard exterior and interior 3/4 matching Viraguard sheles on satin chrome furniture shelf rests Matching Viraguard for ceilings and floors You must use P, FP or to get a wood eneer matching interior Natural Birch and Natural Maple door styles with standard end panels are supplied standard with a Natural Birch Viraguard interior. It is not necessary to order Matching Interior. l FB ID GD RTK RTKP C4 Construction Options

25 Matching Wood Veneer Interior Wood Veneer Exterior Plywood ½ Matching Interior with 1/2 Plywood End Panels P Indiidual Cabinets A Matching Interior Plywood option is aailable for indiidual items in a kitchen A Matching Interior option is recommended for all cabinets haing glass doors Consult Matching Interior () option box for aailability for your desired cabinet Inside of face frame is unfinished This option includes: 1/2 plywood end panels with matching wood eneer exterior and interior 3/4 plywood sheles with matching wood eneer on satin chrome shelf rests 1/2 plywood with matching wood eneer for ceilings and floors 3/8 plywood base and tall back panel with matching wood eneer 3/16 plywood wall and furniture back panel To order indiidual line items with Matching Interior you must hae each line item dashed with the appropriate codes P (Example: W3030BUTT-P, WEP3 30L-P) Note: To get Matching Interior Furniture Plywood Ends with All Plywood Construction use l FB ID GD RTK RTKP Matching Wood Veneer Interior Plywood Matching Wood Veneer Interior Plywood Wood Veneer Exterior ¾ Wood Veneer Exterior 3 / 4 Matching Interior with 3/4 (Furniture) End Panels on All Plywood () Orders Indiidual Cabinets A Matching Interior All Plywood Furniture option is aailable for indiidual items in a kitchen A Matching Interior option is recommended for all cabinets haing glass doors Consult Matching Interior () option box for aailability for your desired cabinet Inside of face frame is unfinished This option includes: 3/4 plywood end panels with matching wood eneer exterior and interior 3/4 plywood sheles with matching wood eneer on satin chrome shelf rests 1/2 plywood with matching wood eneer for ceilings and floors. 3/8 plywood base and tall back panel with matching wood eneer 3 16 plywood with matching wood eneer wall and furniture back panel To order a full kitchen with Matching Interior you must use in the header and hae each line item dashed with (Example: W3030BUTT-, WEP3 30L-) Matching Interior with 3/4 Furniture Plywood End Panels FP Indiidual Cabinets A Matching Interior option is recommended for all cabinets haing glass doors Consult Matching Interior () option box for aailability for your desired cabinet Inside of face frame is unfinished This option includes: 3/4 plywood end panels with matching wood eneer exterior and interior 3/4 engineered wood with matching wood eneer sheles on satin chrome shelf rests 1/2 engineered wood with matching wood eneer for ceilings and floors 3/16 plywood with matching wood eneer wall back panel. To order indiidual line items with matching interior you must hae each line item dashed with FP (Example: W3030BUTT-FP, WEP3 30L-FP) Note: To get Matching Interior Furniture Plywood Ends with All Plywood Construction use l l FB ID GD RTK RTKP FB ID GD RTK RTKP Specifications and Options Wood Veneer Construction KraftMaid manufactures certain cabinets with Wood Veneer Construction standard. See specific cabinet for details. Depending on the item, this may consist of a solid hardwood, plywood or engineered wood core that has solid wood eneer on both sides and is finished to match Construction Options C5

26 Reduced Depth Many cabinets can be reduced to your desired depth in 1/16 increments. We do hae suggested minimums that control function of cabinets. See chart Any cabinet reduced in depth to less than 4 5/8 will be shipped as a Cabinet Front Only (CFO) Consult option aailability chart for your desired cabinet Example: B24R- reduced depth to 20 1/4 l FB ID GD RTK RTKP Cabinet Drawer Box Depth Sugg. Min Cabinets Reason ⅝ All Minimum for shelf hole drilling less than 12 No drawer 6 All except walls Minimum for toe kick notch Less than 6 WR is mandatory 9 PB Minimum for toe kick notch Less than 9 WR is mandatory All except walls Minimum for working drawer - less than 12 depth will hae false drawer front 18 BEA Minimum allowed Specifications and Options 15 Increased Depth ID Many wall cabinets can be increased to a 24 depth, in 1/16 increments. Consult option aailability chart for your desired cabinet Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below Example: W2430R-ID increased depth to 16 1/4 Maximum Increased Depth (ID) for peninsula wall cabinets is 15 Note: Maximum cabinet width for this option is 36 l FB ID GD RTK RTKP W3030BUTT-CFO B30BUTT-CFO Cabinet Front Only CFO Front frame and appropriate doors and drawer heads only Toe kick attached where applicable except 93 and 96 tall We recommend using this option on cabinetry containing no factory installed accessories, since all cabinet components will be eliminated except face frame, doors and drawer fonts.for example, order EZR36L-CFO instead of EZR36L.WSS- CFO or B18L-CFO instead of B18L.FWT-CFO FB ID GD RTK RTKP U302484BUTT- CFO VSB CFO C6 Construction Options

27 Classic Layered Mullion Glass Door Inserts GD For complete listing of glass door specifications, see Decoratie Doors and Inserts section of this book Annealed Glass Glass that has been cooled with precise control to reliee stress introduced by the manufacturing process. This annealing process makes the glass workable, i.e. easier to cut, machine, etc. Common household glass is annealed glass. It is NOT safety glass. Laminated Safety Glass When broken, laminated safety glass is held together by the adhesies that are used in the manufacturing process. This generally helps keep large pieces of glass from falling from the opening. Neertheless, small pieces and/ or chips may still fall, and the precise size of pieces of glass that will break is difficult to identify and describe. Tempered Glass Tempering uses either a thermal or chemical process to quickly harden the glass, which compresses its surface. Compressing the surface increases the amount of tensile stress that can be endured before breakage occurs. When it does break, tempered glass generally breaks into ery small pieces. Not aailable on cabinets with more than four doors Note: Most doors (12 or wider and up to 54 high) can be supplied prepared for glass, with glass inserts or Mullion glass Classic Drawer Front CLDF Aailable on S.Cayden and S.Deeron l FB ID GD RTK RTKP FB ID GD RTK RTKP Specifications and Options Void All Doors and Drawer Fronts VDA All cabinets can be ordered with VDA. This option remoes all doors and drawer fronts. Drawer boxes remain. Hinges are not included Note: VDA only remoes doors and drawer fronts. Tambour units, panels and center stiles will still be attached. FB ID GD RTK RTKP Construction Options C7

28 Void Doors Only VDO Cabinets with a door and drawer combination may be ordered with VDO. This option remoes all doors. Drawer fronts and boxes remain. Hinges are not included. FB ID GD RTK RTKP B30BUTT-RTKL Recessed toe kick left Recessed Toe Kick 31/8 B30BUTT-RTKR Recessed toe kick right 3 1/8 RTKB RTKL RTKR Both Left Right Most Base, Tall and Vanity cabinets can be ordered with a recessed toe kick. Consult option aailability chart for desired cabinet You must specify end or ends to receie recessed toe kick Additional bottom support is recommended when using RTKB on peninsula cabinets wider than 27 Not aailable on 93 and 96 high tall cabinets FB ID GD l RTK RTKP Specifications and Options B30BUTT-RTKB 3 3 Recessed toe kick both 1/8 1/8 RTKP RTKPB RTKPL Recessed Toe Kick Peninsula RTKP Back RTKPB Back and both sides RTKPL Back and left side RTKPR Back and right side We recommend Recessed Toe Kicks (RTKR or RTKL) on base cabinets at the end of peninsula runs or island applications. Select Base and Office Cabinets may be ordered with a Recessed Toe Kick on the back (Peninsula) side. Consult option aailability chart for desired cabinet. You must specify end or ends to receie Recessed Toe Kick Peninsula Additional bottom support is recommended when using RTKPB on cabinets wider than 27 Not aailable on cabinets less than 21 deep FB ID GD RTK l RTKP RTKPR C8 Construction Options

29 Wall Cabinets Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Note: Standard wall cabinet box depth is unless stated otherwise. Add door thickness with bumpers for total depth. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth ID- -- Increased Depth GD -- Glass Doors W code width height Caution: Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Failure to proide additional support could result in collapse of the cabinet, serious personal injury, or property damage. Damage relating to failure to proide additional support is not coered by the limited warranty. See inside coer for warranty details Any wall cabinet oer 24 wide or 30 high with a depth greater than 12 and/or butt doors must be installed between two cabinets, a cabinet and a wall, or supported from below. Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. W2412BUTT- W3612BUTT W3912 Wall Double Door H W2412 BUTT W2712 (Butt) W3012 BUTT W3312 BUTT W3612 BUTT I W3912 I Not aailable in Increased Depth (ID) No shelf Remember, a cabinet designated BUTT or (Butt) has no center stile. When you see the word BUTT in all capitals, it must be included as part of your ordering nomenclature, a (Butt) in parentheses is for your information and isn t required on an order form Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below l l I ID l GD Wall Cabinets WR3012BUTT- WR3612BUTT Wall Refrigerator Deep H WR3012 BUTT WR3312 BUTT WR3612 BUTT WR3912 No shelf Additional support required l l ID l GD WR3912 Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Cabinets D1

30 Wall Double Door 15 H 15 W2415BUTT- W3615BUTT W2415 BUTT W2715 (Butt) W3015 BUTT W3315 BUTT W3615 BUTT I W3915 I Not aailable in Increased Depth (ID) No shelf Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below l l I ID l GD 15 W3915 Wall Refrigerator Deep 15 H 15 WR3015BUTT- WR3616BUTT WR3015 BUTT WR3315 BUTT WR3615 BUTT WR3915 No shelf Additional support required l l ID l GD 15 WR3915 Wall Single Door 18 H Specify R or L W1818 R or L W2118 R or L W2418 R or L No shelf l l l ID l GD 18 Wall Cabinets Wall Double Door 18 H 18 W2418BUTT- W3618BUTT W2418 BUTT W2718 (Butt) W3018 BUTT W3318 BUTT W3618 BUTT I W3918 No shelf l l I ID l GD I W I Not aailable in Increased Depth (ID) W3918-W4218 D2 Wall Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

31 18 WR3018BUTT- WR3618BUTT Wall Refrigerator Deep 18 H WR3018 BUTT WR3318 BUTT WR3618 BUTT WR3918 Additional support required No shelf l l ID l GD 18 WR ½ Wall Single Door 23 1/2 H W1224 R or L W1524 R or L W1824 R or L W2124 R or L W2424 R or L One adjustable shelf Tip: When mounting a Spice Drawer Cabinet (SDC ) or Organizer (O ) underneath a 23 1/2 cabinet next to a 30 high wall cabinet, the oerall height will be 29 1/2. To correct this, you can place a 1/2 filler between the 23 1/2 cabinet and the 6 cabinet. l l l ID l GD ½ 23 ½ W24_BUTT- W36_BUTT W3924-W4524 Wall Double Door 21 and 23 1/2 H 21 High 23 1/2 High W2721 (Butt) W2424 BUTT W3021 BUTT W2724 (Butt) W3321 BUTT W3024 BUTT W3621 BUTT W3324 BUTT W3624 BUTT I W3924 I W4224 I W4524 I Not aailable in Increased Depth (ID) One adjustable shelf wide wall cabinets with BUTT doors hae wood eneer plywood sheles Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below l l I ID l GD Wall Cabinets ½ WR30_BUTT- WR36_BUTT Wall Refrigerator Deep 21 and 23 1/2 H 21 High WR3021 BUTT WR3321 BUTT WR3621 BUTT 23 1/2 High WR3024 BUTT WR3324 BUTT WR3624 BUTT WR3924 Additional support required One adjustable shelf wide wall cabinets with BUTT doors hae wood eneer plywood sheles l l ID l GD 23 ½ WR3924 Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Cabinets D3

32 27 Wall Double Door 27 H W2727 (butt) W3027 BUTT W3327 BUTT W3627 BUTT One adjustable shelf Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below l l l ID l GD 27 Wall Refrigerator 24 Deep 27 H WR3027 BUTT WR3327 BUTT WR3627 BUTT Additional support required One adjustable shelf wide wall cabinets with BUTT doors hae wood eneer plywood sheles l l ID l GD Wall Cabinets Wall Single Door 30 and 33 H Specify R or L 30 High ; W930 R or L W1230 R or L W1530 R or L W1830 R or L W2130 R or L W2430 R or L ; Glass door option not aailable 33 High ; W933 R or L W1233 R or L W1533 R or L W1833 R or L W2133 R or L W2433 R or L Two adjustable sheles l l l ID I GD D4 Wall Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

33 Wall Double Door 30 and 33 H W24BUTT- W36BUTT 30 High W2430 BUTT W2730 (Butt) W3030 BUTT W3330 BUTT W3630 BUTT I W3930 I W4230 I W High W2433 BUTT W2733 (Butt) W3033 BUTT W3333 BUTT W3633 BUTT I W3933 I W4233 I W4533 Two adjustable sheles wide wall cabinets with BUTT doors hae wood eneer plywood sheles Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below l l I ID l GD I W4830 I W4833 I Not aailable in Increased Depth (ID) W39-W48 Wall Refrigerator Deep 30 H 30 WR2430 BUTT WR3030 BUTT WR3330 BUTT WR3630 BUTT Two adjustable sheles Additional support required wide wall cabinets with BUTT doors hae wood eneer plywood sheles l l ID l GD Wall Cabinets Wall Single Door 36 H 36 Specify R or L ; W936 R or L W1236 R or L W1536 R or L W1836 R or L W2136 R or L W2436 R or L Three adjustable sheles l l l ID I GD ; Glass door option not aailable Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Cabinets D5

34 Wall Double Door 36 H W24BUTT- W36BUTT W2436 BUTT W2736 (Butt) W3036 BUTT W3336 BUTT W3636 BUTT I W3936 I W4236 I W4536 I W4836 Three adjustable sheles wide wall cabinets with BUTT doors hae wood eneer plywood sheles Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below l l I ID l GD W39-W48 I Not aailable in Increased Depth (ID) Wall Single Door 39 and 42 H Specify R or L 39 High ; W939 R or L W1239 R or L W1539 R or L W1839 R or L W2139 R or L W2439 R or L 42 High ; W942 R or L W1242 R or L W1542 R or L W1842 R or L W2142 R or L W2442 R or L Three adjustable sheles l l l ID I GD ; Glass door option not aailable Wall Double Door 39 and 42 H W24BUTT - W36BUTT 39 High W2439 BUTT W2739 (Butt) W3039 BUTT W3339 BUTT W3639 BUTT I W High W2442 BUTT W2742 (Butt) W3042 BUTT W3342 BUTT W3642 BUTT I W3942 Three adjustable sheles wide wall cabinets with BUTT doors hae wood eneer plywood sheles l l I ID l GD Wall Cabinets I W4239 I W4539 I W4839 I W4242 I W4542 I W4842 I Not aailable in Increased Depth (ID) W39-W48 D6 Wall Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

35 30 6 5/8 9 Wall Cabinet w/spice Rack Specify R or L W1530 R or L SR W1830 R or L SR W2130 R or L SR Right shown Two standard depth adjustable sheles Spice rack is 3 1/8 deep, rack shelf is 2 1/8 deep l l l ID l GD 8 7/8 Wall Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Cabinets D7

36 Peninsula Wall Cabinets PW code width height Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions When BUTT is in all capitals, it must be included as part of your ordering nomenclature. Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth ID- -- Increased Depth GD -- Glass Doors 18 Peninsula Wall Single Door 18 H Specify R or L PW1818 R or L No shelf Frame backs are not finished l l l ID l GD Wall Cabinets Peninsula Wall Double Door 18 H 18 PW24BUTT PW2418 BUTT PW3018 PW3618 I PW4218 I Not aailable in Increased Depth (ID) 18 PW30-PW42 No shelf Frame backs are not finished Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below l l I ID l GD 23 ½ Peninsula Wall Single Door 23 1/2 H Specify R or L - Kitchen Side Hinging PW1224 R or L PW1824 R or L PW2424 R or L Right shown One adjustable shelf Frame backs are not finished l l l ID l GD D8 Peninsula Wall Cabinets Note: Peninsula wall cabinets must be installed against soffit, ceiling or supported by countertop.

37 21 23 ½ 27 Peninsula Wall Double Door 21, 23 1/2 and 27 H 21 High PW3021 PW /2 High PW2424 BUTT PW3024 PW3624 I PW High PW3027 PW3627 One adjustable shelf Frame backs are not finished Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below l l I ID l GD I Not aailable in Increased Depth (ID) Peninsula Wall Single Door 30 and 33 H Specify R or L - Kitchen Side Hinging 30 High PW1230 R or L PW1530 R or L PW1830 R or L PW2430 R or L 33 High Right shown Two adjustable sheles Frame backs are not finished l l l ID l GD PW1233 R or L PW1533 R or L PW1833 R or L PW2433 R or L Peninsula Wall Double Door 30 and 33 H 30 High PW2430 BUTT PW3030 PW3630 I PW High PW2433 BUTT PW3033 PW3633 I Not aailable in Increased Depth (ID) Two adjustable sheles Frame backs are not finished l l I ID l GD Wall Cabinets Peninsula Wall Single Door 36 H Specify R or L PW2436 R or L Three adjustable sheles Frame backs are not finished l l l ID 36 l GD Note: Peninsula wall cabinets must be installed against soffit, ceiling or supported by countertop. Peninsula Wall Cabinets D9

38 36 PW24BUTT Peninsula Wall Double Door 36 H PW2436 BUTT PW3036 PW3636 Three adjustable sheles Frame backs are not finished l l l ID l GD 36 PW30-PW Peninsula Wall Single Door 39 and 42 H Specify R or L 39 High PW2439 R or L 42 High PW2442 R or L Three adjustable sheles Frame backs are not finished l l l ID l GD PW24BUTT Peninsula Wall Double Door 39 and 42 H 39 High PW2439 BUTT PW3039 PW High Three adjustable sheles Frame backs are not finished l l l ID l GD Wall Cabinets PW30-PW36 PW2442 BUTT PW3042 PW3642 D10 Peninsula Wall Cabinets Note: Peninsula wall cabinets must be installed against soffit, ceiling or supported by countertop.

39 Wall Corner Cabinets WBC R or L code width height hinging Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth ID- -- Increased Depth GD -- Glass Doors Right blind shown R or L indicates blind A B Wall Blind Corner Cabinet Information All wall blind corner cabinets must be pulled. Consult chart for pull dimensions and minimum wall space requirements. R or L indicates blind Door hinged on same side as blind on single door cabinets Note: A 3 Wall Filler (WF) is supplied and shipped separately with each Wall Blind Cabinet (WBC) ordered. A Wall Cabinet adjacent to WBC may be ordered with an extended stile in lieu of installing the supplied filler. Two 3 Wall Fillers are supplied with each Peninsula Wall Blind Corner (PWBC) ordered C Wall Blind Cabinet Peninsula Wall Blind Cabinet B A WBC C B A Wall Cabinet PWBC Filler 1/2 Oerlay Full Oerlay Wall Space A Exposed Front B Door Open Cab. Wall Space A Exposed Front B Door Open Cab. Cabinet Min Max Min. Max C Width Min. Max. Min. Max C Width P/WBC24 21 ¼ 24 ¾ 9 ¼ 12 ¾ ¾ ¾ 6 21 P/WBC27 24 ¼ 27 ¾ 12 ¼ 15 ¾ ¾ ¾ 9 P/WBC30 27 ¼ 30 ¾ 15 ¼ 18 ¾ ¾ ¾ 27 WBC33 30 ¼ 33 ¾ 18 ¼ 21 ¾ ¾ ¾ WBC36 33 ¼ 36 ¾ 21 ¼ 24 ¾ ¾ ¾ WBC39 36 ¼ 39 ¾ 24 ¼ 27 ¾ ¾ ¾ WBC42 39 ¼ 42 ¾ 27 ¼ 30 ¾ ¾ ¾ 39 WBC45 42 ¼ 45 ¾ 30 ¼ 33 ¾ (2) ¾ ¾ (2) 42 WBC48 45 ¼ 48 ¾ 33 ¼ 36 ¾ (2)13 ½ ¾ ¾ (2)13 ½ 45 Wall Cabinets C Wall Cabinet 3 Filler Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Corner Cabinets D11

40 23 ½ Wall Blind Corner Single Door 23 1/2, 30 and 33 H Specify R or L One shelf 23 1/2 High WBC2724 R or L WBC3024 R or L WBC3324 R or L WBC3624 R or L WBC3924 R or L Two sheles 30 High ; WBC2430 R or L WBC2730 R or L WBC3030 R or L WBC3330 R or L WBC3630 R or L WBC3930 R or L 33 High R or L indicates blind Left shown Adjustable sheles Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below l l l ID I GD 8 ; WBC2433 R or L WBC2733 R or L WBC3033 R or L WBC3333 R or L WBC3633 R or L WBC3933 R or L ; Glass door option not aailable Wall Blind Corner Double Door 30 H Specify R or L i WBC4230 R or L WBC4530 R or L WBC4830 R or L i Two butt doors R or L indicates blind Left shown Adjustable sheles l l ID l GD 30 8 Wall Cabinets Wall Blind Corner 36 H Specify R or L ; WBC2436 R or L WBC2736 R or L WBC3036 R or L WBC3336 R or L WBC3636 R or L R or L indicates blind Left shown Three adjustable sheles l l l ID I GD ; Glass door option not aailable 36 8 D12 Wall Corner Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

41 Wall Blind Corner 39 and 42 H Specify R or L 39 High ; WBC2439 R or L WBC2739 R or L WBC3039 R or L WBC3339 R or L WBC3639 R or L WBC3939 R or L 42 High ; WBC2442 R or L WBC2742 R or L WBC3042 R or L WBC3342 R or L WBC3642 R or L WBC3942 R or L ; Glass door option not aailable R or L indicates blind Left shown Three adjustable sheles Any wall cabinet oer wide or 30 high or higher with a depth greater than and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below l l l ID I GD 23 1 / Peninsula Wall Blind Corner Specify R or L for Blind One shelf 23 1/2 High i PWBC2724 R or L i PWBC3024 R or L Two sheles 30 High I; PWBC2430 R or L i PWBC2730 R or L i PWBC3030 R or L Three sheles 36 High I; PWBC2436 R or L i PWBC3036 R or L 39 High I; PWBC2439 R or L PWBC3039 R or L 42 High 33 High I; PWBC2433 R or L i PWBC3033 R or L 8 i Butt doors on peninsula side I Single door both sides ; Glass door option not aailable I; PWBC2442 R or L i PWBC3042 R or L R or L indicates blind Left shown Adjustable sheles Frame backs are not finished See Wall Blind Corner (WBC) cabinet chart for cabinet specifications Two 3 fillers included l l l ID I GD Wall Angle & Easy Reach Cabinet Information Wall Cabinets Left/Left Right/Right 27 21,, ½ ¼ WA24 WA /16 WEZR Left/Right PWA Right/Left Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Corner Cabinets D13

42 Wall Angle Deep Specify R or L Two sheles WA2430 R or L WA2433 R or L Three sheles WA2436 R or L WA2439 R or L WA2442 R or L Adjustable sheles Note: Full oerlay door styles use a 1/2 oerlay hinge Do not design a corner cabinet adjacent to an object deeper than the end panel. The door of the corner cabinet may not function properly. l ID l GD 13 1 / 2 opening / 2 opening 27 Wall Angle 15 Deep Specify R or L Two sheles WA2730 R or L WA2733 R or L Three sheles WA2736 R or L WA2739 R or L WA2742 R or L Adjustable sheles Furniture Plywood Ends (FB) standard; recommended Matching Interior option is FP Flush Finished Ends standard I standard when option is selected Note: Full oerlay door styles use a 1/2 oerlay hinge Full oerlay doors on cabinets with an angled front are intentionally narrower to allow proper clearance of adjacent cabinets. I FB l ID l GD Wall Cabinets Peninsula Wall Angle Two sheles 30 High PWA2430 RR or L PWA2430 LR or L 33 High PWA2433 RR or L PWA2433 LR or L Three sheles 36 High PWA2436 RR or L PWA2436 LR or L 39 High PWA2439 RR or L PWA2439 LR or L 42 High PWA2442 RR or L PWA2442 LR or L Specify R or L rear door position The second R or L designates rear frame position looking at kitchen side Left/Left shown Adjustable sheles Butt doors on peninsula side Frame backs are not finished Note: Full Oerlay door styles: Kitchen side (front) doors use a 1/2 oerlay hinge. Peninsula side (back) doors use a full oerlay hinge l ID l GD 13 ½ opening D14 Wall Corner Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

43 Wall Angle Lazy Susan Specify R or L Two sheles WA2430 R or L LS WA2433 R or L LS Three sheles WA2436 R or L LS WA2439 R or L LS WA2442 R or L LS 19 1/2 diameter rotating sheles Note: Full oerlay door styles use a 1/2 oerlay hinge l l ID GD 13 1 / 2 opening Wall Angle Wood Lazy Susan Specify R or L Two sheles WA2430 R or L WLS WA2433 R or L WLS Three sheles WA2436 R or L WLS WA2439 R or L WLS WA2442 R or L WLS 19 1/2 diameter rotating sheles Rotating sheles hae plywood floor and solid wood trim Sheles rotate independently Note: Full oerlay door styles use a 1/2 oerlay hinge l l ID l GD 13 1 / 2 opening 48, 27, Wall Angle Tambour Specify R or L Two sheles WAT2448 R or L I WAT2748 R or L I Furniture Plywood Ends (FB) standard; recommended Matching Interior option is FP Two adjustable sheles Tambour opens to allow 13 1/2 access height Tambour tension controlled with thumb screw adjustment Note: Full oerlay door styles use a 1/2 oerlay hinge When including any under cabinet storage unit, consider using a countertop with a loose backsplash. This will preent haing to notch the cabinet. I FB l ID l GD Wall Cabinets, ½ opening Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Corner Cabinets D15

44 Wall Angle Tambour Lazy Susan l Specify R or L Two sheles WAT2448 R or L LS 19 1/2 diameter rotating sheles Tambour opens to allow 13 1/2 access height Tambour tension controlled with thumb screw adjustment Note: Full oerlay door styles use a 1/2 oerlay hinge l l ID GD ½ opening Wall Angle Tambour Wood Lazy Susan l Specify R or L Two sheles WAT2448 R or L WLS 19 1/2 diameter rotating sheles Sheles rotate independently Rotating sheles hae plywood floor and solid wood trim Tambour opens to allow 13 1/2 access height Tambour tension controlled with thumb screw adjustment Note: Full oerlay door styles use a 1/2 oerlay hinge l l ID GD 13 ½ opening Wall Cabinets , 21, Wall Easy Reach Specify R or L Two sheles 30 High = WEZR2130 R or L WEZR2430 R or L 33 High = WEZR2133 R or L WEZR2433 R or L = Glass door option not aailable s 1 3/4 face frame Three sheles 36 High = WEZR2136 R or L s WEZR2436 R or L 39 High = WEZR2139 R or L WEZR2439 R or L 42 High = WEZR2142 R or L WEZR2442 R or L Right shown Adjustable sheles Frame opening from left to right edge: 10 1/2 for WEZR /4 for WEZR24 Face frame is scooped for hinge installation on full oerlay door styles Hinged door opens to 170 Note: Does not include Soft-Close feature Do not design a corner cabinet adjacent to an object deeper than the end panel. The door of the corner cabinet may not function properly. l ID I GD D16 Wall Corner Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

45 Wall End Run Cabinets WCA code depth height Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction -- Matching Interior -- Reduced Depth GD -- Glass Doors Wall Corner Angle Specify R or L Two sheles WCA1230 R or L WCA1233 R or L Three sheles WCA1236 R or L WCA1239 R or L WCA1242 R or L Adjustable sheles l l l l l GD SQT 4 3 / 4 R SQTB Wall End Open Shelf Specify R or L (3) 8 13/16 sections 30 High WEOS630 R or L WEOS630 R or L SQT WEOS630 R or L SQTB (3) 9 13/16 sections 33 High WEOS633 R or L WEOS633 R or L SQT WEOS633 R or L SQTB (4) 7 15/16 sections 36 High 5/8 wood eneer construction 1 3/16 thick top and bottom sheles Left shown I Reduced Depth () aailable in 3 increments to a minimum of 6 Remember, order Wall End Open Sheles (WEOS) with a Square Top (-SQT) when applying top molding. l I GD Wall Cabinets WEOS636 R or L WEOS636 R or L SQT WEOS636 R or L SQTB (4) 8 11/16 sections 39 High WEOS639 R or L WEOS639 R or L SQT WEOS639 R or L SQTB (4) 9 7/16 sections 42 High WEOS642 R or L WEOS642 R or L SQT WEOS642 R or L SQTB Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall End Run Cabinets D17

46 Wall Open Cabinets WOC code width height Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth ID- -- Increased Depth Wall Cabinets Wall Open Cabinet Two sheles 30 High WOC2430 WOC2730 WOC3030 WOC3330 WOC High WOC2433 WOC2733 WOC3033 WOC3333 WOC3633 Three sheles 36 High WOC2436 WOC2736 WOC3036 WOC3336 WOC High WOC2439 WOC2739 WOC3039 WOC3339 WOC High WOC2442 WOC2742 WOC3042 WOC3342 WOC3642 Three sheles, shipped separately 48 High WOC2448 WOC2748 WOC3048 WOC3348 WOC3648 Four sheles, shipped separately 54 High WOC2454 WOC2754 WOC3054 WOC3354 WOC3654 No door I Maximum Increased Depth (ID) is 15 for cabinets 48 and 54 high l I ID D18 Wall Open Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

47 15 11 Wall China Display 15 H WCD plates WCD plates WCD plates 10 7/8 clearance for plates Spindle height 11 1/2 Spindles are shipped separately Wood eneer Beaded Back I Minimum Reduced Depth () is 9 I ID 15 Lattice Wall Horizontal LW bottles LW bottles 3 3/4 diameter bottle Lattice finished one side only Lattice is not remoable ID 5 ¼ interior diagonal dimension 30 Lattice Wall Vertical LW bottles LW bottles 3 3/4 diameter bottle Lattice is not remoable Lattice finished one side only ID 5 ¼ interior diagonal dimension Wall Cabinets Wine Storage Cabinet ½ WSC1818 WSC2424 Requires additional support. Installation between two cabinets or cabinet and wall recommended. ID Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Open Cabinets D19

48 Wall Microwae Cabinets WMC code width depth height Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Installation notes: Installation of a wall cabinet 30 or wider, by itself, is not recommended by KraftMaid and requires additional support, such as attachment to a soffit, or support from below. Any wall cabinet oer 24 wide or 30 high with a depth greater than 12 or butt doors must be installed between two cabinets, a cabinet and a wall, or supported from below. Material dimensions may ary slightly based on lumber industry standards. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth GD -- Glass Doors Specifications subject to change without notice. Wall Cabinets 36 18, Wall Microwae Cabinet 36 H Opening trimmable to: Width: 16 to 25 Height: 13 to 19 WMC (Butt) WMC (Butt) Opening trimmable to: Width: 19 to 28 Height: 13 to 19 WMC WMC Designed for built-in style microwaes Note: Must be installed between two cabinets or cabinet and wall with supplied connectors Installation of a wall cabinet 30 or wider, by itself, is not recommended by KraftMaid and requires additional support, such as attachment to a soffit or support from below l l l GD 45 Wall Microwae Cabinet 45 H Opening trimmable to: Width: 19 to 28 Height: 13 1/2 to 19 1/2 WMC WMC Designed for built-in style microwaes Note: Must be installed between two cabinets or cabinet and wall with supplied connectors l l l GD 21 18, 21 D20 Wall Microwae Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

49 ½ Wall Microwae Shelf Cabinet No shelf 36 High Inside Dimensions: WMSC (Butt) 24 x 18 3/4 WMSC x 18 3/4 WMSC (Butt) 24 x 18 3/4 One shelf 42 High 3/4 matching shelf, 18 deep on 12 cabinets, 24 deep on 18 cabinets Designed for countertop style microwaes Note: Must be installed between two cabinets or cabinet and wall with supplied connectors l l GD WMSC (Butt) 24 x 16 1/4, Wall Compact Microwae Shelf Inside Dimensions: WCMSC x 15 3/4 WCMSC (Butt) 24 x 15 3/4 18 deep, 3/4 matching shelf Designed for countertop style microwaes Note: Must be installed between two cabinets or cabinet and wall with supplied connectors l l GD 36 Wall Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Microwae Cabinets D21

50 Wall Hoods WHCC code width depth height Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Consult your local building code for rules and regulations that may apply to the installation of this product. Specifications subject to change without notice. -- All Plywood Construction Wall Hood Classic l 23 ½ 5 ¾ CRHF3024 P CRHF3624 P Solid wood/wood eneer construction Metal liner required Requires component package B or E Note: Wall Hood must be installed between two cabinets 7 Wall Cabinets 22 5 / 8 8, / / / / / / / / 4, / / 8 Opening Sizes Wall Hood Classic Chimney 30 5/8 High WHCC P WHCC P 42 5/8 High WHCC P WHCC P Cabinet Top Width Top Depth Bottom Width Bottom Depth WHCC ½ WHCC ¾ 34 ½ Solid wood/wood eneer construction Check local building codes for required clearances between the Wall Hood and cooking surface A 3 space is recommended on the right and left side of this unit before beginning the adjacent cabinet runs 30 5/8 high hoods are designed for use with 8 foot ceilings 42 5/8 high hoods are designed for use with 9 ft. ceilings Upper moldings matches Soffit Crown Molding profile (SCM8) Chimney section shipped separately Will accept optional onlays, ordered separately; see Molding Accents section of this book Not designed to be used with a soffit Requires component package J Note: Cabinetry and appliances located below these Wall Hoods must be pulled to a minimum of 27 deep and a maximum of 30 deep for improed function Note: Wall Hood must be securely anchored to wall Select a Wall Hood, Chimney style when designing with open soffits. A Chimney style hood is selected when you want an unfitted look; a design that looks great with your door style, but matching or including the door style is not required. D22 Wall Hoods Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

51 Wall Hood Classic Chimney Raised Panel Valance 8, / / / / / / 4, / / High WHCCRPV P WHCCRPV P 44 High WHCCRPV P WHCCRPV P Solid wood/wood eneer construction A 3 space is recommended on the right and left side of this unit before beginning the adjacent cabinet runs Decoratie molding matches Soffit Crown Molding profile (SCM8) Chimney section shipped separately Not designed to be used with a soffit Requires component package J Note: Cabinetry and appliances located below these Wall Hoods must be pulled to a minimum of 27 deep and a maximum of 30 deep for improed function Note: Wall Hood must be securely anchored to wall The Wall Hood Classic Chimney Raised Panel Valance includes a representatie raised panel profile that blends with most raised panel door styles. It may not match the chosen door style exactly. Consider designing in a alance on the adjacent wall of the cooking area to coordinate with this style hood. Opening Sizes Cabinet Top Width Top Depth Bottom Width Bottom Depth WHCCRPV30 WHCCRPV ¾ Wall Hood Component Package B Recirculating 10 5/8 23 ½ 8 ¾ CRHCP30 R SN CRHCP36 R SN This unit includes a satin nickel colored metal liner, and an easy to clean aluminum mesh filter. This is powered by a 390 CFM squirrel cage fan and has push button controls. This unit comes with two feet of 7 round ductwork, a 90 elbow, charcoal filter and grille with white ent Requires a 50 watt, 120 olt halogen lamp (MR16 GU10 base) which are aailable at hardware or lighting retailers For use with Wall Hood Classic Wall Cabinets Example of installation when soffit is present Soffit Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Hoods D23

52 Wall Hood Component Package E Vented 23 1/2 16 ½ 26 ¼ 32 ¼ 8 3/8 10 5/8 CRHCP30 V SN CRHCP36 V SN Satin Nickel Satin Nickel This unit includes metal liner, and an easy to clean aluminum mesh filter. This is powered by a 390 CFM squirrel cage fan and has push button controls. 7 round duct ents on top Requires a 50 watt, 120 olt halogen lamp (MR16 GU10 base) which are aailable at hardware or lighting retailers For use with Wall Hood Classic / /16 Wall Hood Component Package J Vented 19 5/8 13 5/8 183/ / /16 8 ¼ 4 WHCP3019 V WHCP3619 V This unit is used for ducted to exterior installation Powered by a 390 CFM squirrel cage fan and has push button controls Easy to clean aluminum mesh filter Includes stainless steel liner Interior of stainless liner is clear, powder coated 7 round duct Requires two 50 watt, 120 olt halogen light bulbs (MR16 GU10 base) which are aailable at hardware or lighting retailers Front panel of blower is coered with a remoable protectie peel-coat to preent scratching For use with Wall Hood Classic Chimney and Wall Hood Classic Chimney Raised Panel Valance Wall Cabinets D24 Wall Hoods Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

53 Wall Specialty Cabinets 18 TSA 24 height code width Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth ID- -- Increased Depth Tambour Configurations 2 ½ ½ 15 ½ 15 ½ 3 Tambour Storage Tambour Storage This sits directly under the frame, Angle therefore is shorter than the TSA, which sits behind the frame 18 Tambour Storage 18 H TS24 Tambour opens to allow 13 1/2 access height Tambour tension controlled with thumb screw adjustment l l l ID Wall Cabinets 18 1 / 2 Tambour Storage Angle TSA2418 I TSA2718 I Furniture Plywood Ends (FB) standard; recommended Matching Interior option is FP Tambour opens to allow 14 access height Tambour tension controlled with thumb screw adjustment This unit is shipped with the sides at 90 to the face frame Installation note: These units may be installed flush with the face frame of a wall angle (WA) cabinet by trimming the height I FB l ID 11 1 / / / 2 opening Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Specialty Cabinets D25

54 Spice Drawer Cabinet 6 SDC18 SDC24 SDC30 SDC36 3 Drawers 4 Drawers 5 Drawers 6 Drawers 5/8 wood eneer construction Drawer boxes hae 1/2 sides and 3/4 floor, front and back Interior drawer depth 10 1/16 Solid wood drawer fronts Drawer front is adjustable All drawer boxes are Natural Birch wood eneer plywood Drawer box slides along wood guide. Wood guide is used to keep drawers from moing left to right. Vinyl edge banding applied to edges of cabinet Matching wood knobs included, not installed Note: This cabinet features frameless type construction FB ID When using an Organizer (O ) Cabinet or Spice Drawer Cabinet (SDC), which hae flush ends standard, under a wall cabinet at the end of a run, either attach Furniture Ends (FE) or order a 3/16 Wood Skin (WSK) for the wall cabinet to flush the ends. (There will be a seam.) Also, consider ordering a furniture matching wall end panel if the height of the finished product allows it. Wall Cabinets 30 Vertical Spice Drawer Cabinet VSDC6 1/2 plywood ends Drawer boxes hae 1/2 sides and 3/4 floor, front and back Interior drawer depth 10 1/16 Solid wood drawer fronts Drawer front is adjustable Drawer box slides along wood guide. Wood guide is used to keep drawers from moing left to right. All drawer boxes are Natural Birch wood eneer plywood Matching wood knobs included, not installed Recommended installation is between two cabinets Vinyl edge banding applied to edges of cabinet Note: This cabinet features frameless type construction FB ID D26 Wall Specialty Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

55 Wall Wine Rack Cabinet WWR630 5 sheles WWR636 6 sheles WWR642 7 sheles 1/2 plywood ends Vinyl edge banding applied to edges of cabinet Recommended installation is between two cabinets Intended for ertical installation only Note: This cabinet features frameless type construction l FB ID / / / / / 8 O / / / / 4 O30 Organizers O24 O27 O30 O33 O36 5/8 wood eneer construction Vinyl edge banding applied to edges of cabinet Note: This cabinet features frameless type construction When using an Organizer (O ) Cabinet or Spice Drawer Cabinet (SDC), which hae flush ends standard, under a wall cabinet at the end of a run, either attach Furniture Ends (FE) or order a 3/16 Wood Skin (WSK) for the wall cabinet to flush the ends. (There will be a seam.) Also, consider ordering a furniture matching wall end panel if the height of the finished product allows it. FB ID / / / / / / 16 O33-O36 Wall Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Specialty Cabinets D27

56 Wall Filler Pull-out Three adjustable sheles 30 High WFP3 30 WFP High WFP3 33 WFP6 33 Four adjustable sheles 36 High WFP /8 shelf width 5 1/8 shelf width 2 1/8 shelf width 5 1/8 shelf width 2 1/8 shelf width Unit slides on full extension side-mount runners Recommended installation is between two cabinets Installation may also be made between a cabinet and a wall or a cabinet and an end panel with stile Filler is included, but unattached. Unit should be installed before remoing shipping brace and attaching filler A filler oerlay is recommended for full oerlay door styles; must be ordered separately FB ID 11 7/8 Install decoratie hardware prior to attaching filler to pull-out unit WFP High WFP3 39 WFP6 39 Fie adjustable sheles 42 High WFP /8 shelf width 2 1/8 shelf width 5 1/8 shelf width 2 1/8 shelf width Do not use filler pullouts (WFP or BFP) at the end of cabinet runs or next to appliances. They must be installed between two cabinets or a cabinet and an end panel. Filler WFP /8 shelf width Filler Side View Wall Cabinets D28 Wall Specialty Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

57 Wall Accessories WF 3 30 code width height Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth ID- -- Increased Depth 11 5/8 Under Cabinet Shelf UCS36 3 7/8 shelf depth Solid wood/wood eneer construction FB ID 8 ½ 4 Stem Glass Holder 3 / / 16 SGH30 SGH36 7 Sections 8 Sections Solid wood Mounts to bottom of wall cabinet Can be cut to fit smaller cabinets FB ID SGH30 3 ½ 1 SGH36 Wall Cabinets Wine Shelf / 2 1 / / / 8 WS36 6 Bottles Solid wood/wood eneer construction Edgebanded one long and two short edges May be trimmed in field FB ID 3 7 / / / 16 Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Accessories D29

58 Lazy Susan Kit for Wall Angle Cabinets LSK1836 LSK1839 LSK1842 for 36 high for 39 high for 42 high 19 1/2 diameter rotating sheles Vinyl laminated sheles with woodgrain T-molding Designed for installation in a WA24 cabinet only Field installation only FB ID Wood Lazy Susan Kit for Wall Angle Cabinets LSK1836 WLS for 36 high LSK1839 WLS for 39 high LSK1842 WLS for 42 high 19 1/2 diameter rotating sheles Rotating sheles hae plywood floor and solid wood trim Sheles rotate independently Designed for installation in a WA24 cabinet only Field installation only FB ID Spice Rack Kit 6 5/8 9 SRK15 SRK18 SRK21 9 1/2 wide 12 1/2 wide 15 1/2 wide Rack is 3 1/8 deep Three fixed sheles, 2 1/8 deep Minimum cabinet height 30 Includes mounting hardware Field installation only FB ID Wall Cabinets 8 7/8 Wall Filler High WF3 30 WF High WF3 42 WF6 42 3/4 thick solid wood Finished one side only FB ID 30 High WF3X High WF WF3x3 WF3X3 42 D30 Wall Accessories Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

59 11 5/8 14 5/8 17 5/8 20 5/8 23 1/8 29 5/8 32 5/8 35 5/8 38 5/8 41 5/8 Wall Filler Oerlay WFOL3 12 WFOL6 12 WFOL3 15 WFOL6 15 WFOL3 18 WFOL6 18 WFOL3 21 WFOL6 21 WFOL3 24 WFOL6 24 WFOL3 30 WFOL6 30 WFOL3 33 WFOL6 33 WFOL3 36 WFOL6 36 WFOL3 39 WFOL6 39 WFOL3 42 WFOL6 42 Aailable in full oerlay door styles only Filler oerlay has routed door profile and is solid wood Filler ordered separately FB ID ½ Wall Fluted Filler WFF3 12 WFF3 30 WFF3 33 WFF3 36 WFF3 39 WFF3 42 3/4 thick solid wood Trimmable 5/8 each side FB ID 1 ½ Filler Extension FE3 30 FE3 33 FE3 36 FE3 39 FE3 42 3/4 thick solid wood FB ID Filler Extension Filler Extension Application Wall Cabinets Fluted Filler Extension FFE3 30 FFE3 33 FFE3 36 FFE3 39 FFE3 42 3/4 thick solid wood FB ID / 2 Fluted Filler Extension Filler Extension Application Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Accessories D31

60 / 4 1 / 2 3 / 16 Wall Box WB high WB high Finished front and both sides Reersible, may be used on either right or left end l l ID Wall Column / 4 3 / 4 WC31530 WC31542 WC31560 Front is 3/4 solid wood Finished front and both sides Reersible, may be used on either right or left end I standard when option is selected I FB l l ID 15 Wall Fluted Column ½ ¾ ¾ WFC31530 WFC31542 WFC31560 Fluted front is 3/4 solid wood Finished front and both sides Reersible, may be used on either right or left end I standard when option is selected I FB l l ID Wall Cabinets 15 1 ½ Wall End Panel WWEP30 12 x 30 x 13/16 WWEP42 12 x 42 x 13/16 Wood eneer construction Edgebanded one long and two short edges Finished to match exterior both sides panel is 11/16 thick l FB ID D32 Wall Accessories Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

61 30 42 Wall End Panel w/stile WEP1 1/ high WEP high WEP1 1/ high WEP high Left shown Viraguard panels are edgebanded two short edges Exterior finished to match, interior is Natural Birch Viraguard and machined to match a cabinet end panel Reersible, may be used on either right or left end l l l ID ½ /8 ¾ 3/1 6 Matching Wall End Panel Specify R or L MWEP12 R or L MWEP15 R or L MWEP18 R or L MWEP24 R or L MWEP30 R or L MWEP33 R or L MWEP36 R or L MWEP39 R or L MWEP42 R or L s MWEP48 R or L s MWEP54 R or L Peninsula PMWEP12 PMWEP15 PMWEP18 PMWEP24 PMWEP30 PMWEP33 PMWEP36 PMWEP39 PMWEP42 3/4 thick Inside of matching panel bottom rail will line up with inside bottom rail of door Left shown Field installation only Peninsula panel has routed door profile front and back When designing with Matching End Panels the reeal will differ from the cabinet door height reeal. Matching End Panels coer the entire side of the cabinet. See drawing for exact measurements FB ID s Aailable in full oerlay door styles only ½ /8 54 Furniture Matching Wall End Panel Specify R or L Peninsula FMWEP12 R or L FPMWEP12 FMWEP15 R or L FPMWEP15 FMWEP18 R or L FPMWEP18 FMWEP24 R or L FPMWEP24 FMWEP30 R or L FPMWEP30 FMWEP33 R or L FPMWEP33 FMWEP36 R or L FPMWEP36 FMWEP39 R or L FPMWEP39 FMWEP42 R or L FPMWEP42 s FMWEP48 R or L s FMWEP54 R or L s Aailable in full oerlay door styles only 3/4 thick Inside of matching panel bottom rail will line up with inside bottom rail of door Left shown Field installation only Peninsula panel has routed door profile front and back For use with Furniture Plywood Ends (FB) flush ends FB ID Wall Cabinets Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below. Wall Accessories D33

62 Diagonal Installation of Standard Wall Cabinets D D C C Optional Wall B A Note: Fillers are always recommended at both sides of cabinet junction points to allow for wall ariations and drawer clearances Wall Cabinets Cabinet Width A Cabinet Depth B Wall Dimensions C Wall Dimensions D D34 Wall Accessories Caution! Installation of a wall cabinet 30 or wider requires additional support, such as attachment to a soffit, or support from below.

63 Base Cabinets B 36 BUTT code width door type Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Note: Standard base cabinet box depth is 24 unless stated otherwise. Add door thickness with bumpers for total depth. When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn t required on an order form. Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth GD -- Glass Doors RTK -- Recessed Toe Kick RTKP - Recessed Toe Kick Peninsula 34 1 / 2 Base Single Door Specify R or L B12 R or L B15 R or L B18 R or L B21 R or L B24 R or L One adjustable shelf l l l GD l RTK l RTKP 34 1 / / 2 B24BUTT- B36BUTT Base Double Door B24 BUTT B27 (Butt) B30 BUTT B33 BUTT B36 BUTT B39 One adjustable shelf l l l GD l RTK l RTKP Base Cabinets B39 Base Cabinets E1

64 34 1 / 2 Base Double Door Double Drawer B36 2D B39 2D B42 B48 3 center stile Two drawers One adjustable shelf l l l GD l RTK l RTKP 34 1 / 2 Base Single Door w/full-width Tray Specify R or L B12 R or L FWT B15 R or L FWT B18 R or L FWT B21 R or L FWT B24 R or L FWT One adjustable, full-width Roll-out Tray (ROT) One adjustable shelf Roll-out Trays (ROT) cannot be included when a Reduced Depth () option of less than 18 is selected l l l GD l RTK l RTKP 34 1 / 2 Base Single Door w/two Full-Width Trays Specify R or L B12 R or L 2FWT B15 R or L 2FWT B18 R or L 2FWT B21 R or L 2FWT B24 R or L 2FWT Two adjustable, full-width Roll-out Trays (ROT) Roll-out Trays (ROT) cannot be included when a Reduced Depth () option of less than 18 is selected l l l GD l RTK l RTKP Base Cabinets 34 1 / 2 Base Double Door w/full-width Tray B24 BUTT FWT B27 (Butt) FWT B30 BUTT FWT B33 BUTT FWT B36 BUTT FWT One adjustable, full-width Roll-out Tray (ROT) One adjustable shelf Roll-out Trays (ROT) cannot be included when a Reduced Depth () option of less than 18 is selected Remember, when designing a space for storing heay items, aoid using wide Roll-Out Trays (ROT). These units are not designed for extremely heay loads l l l GD l RTK l RTKP E2 Base Cabinets

65 34 1 / 2 Base Double Door w/two Full-Width Trays B24 BUTT 2FWT B27 (Butt) 2FWT B30 BUTT 2FWT B33 BUTT 2FWT B36 BUTT 2FWT Two adjustable, full-width Roll-out Trays (ROT) Roll-out Trays (ROT) cannot be included when a Reduced Depth () option of less than 18 is selected l l l GD l RTK l RTKP 34 ½ B36 Base Double Door w/two Trays B36 2T B39 2T B42 2T B48 2T 3 center stile Two adjustable Roll-out Trays (ROT) One adjustable shelf Roll-out Trays (ROT) cannot be included when a Reduced Depth () option of less than 18 is selected l l l GD l RTK l RTKP 34 ½ B ½ B36 Base Double Door w/four Trays B36 4T B39 4T B42 4T B48 4T 3 center stile Four adjustable, standard Roll-out Trays (ROT) Roll-out Trays (ROT) cannot be included when a Reduced Depth () option of less than 18 is selected l l l GD l RTK l RTKP 34 ½ B / 2 With diider 34 1 / 2 Without diider Base Single Door w/tray Diider Specify R or L B9 R or L Without Tray Diider B9 R or L VTD Full-height door One full-height tray diider I Recessed Toe Kick Both Sides (RTKB) not aailable I Tray diider cannot be included when Reduced Depth () option of less than 6 is selected l I GD I RTK RTKP Base Cabinets Base Cabinets E3

66 34 1 / 2 Base Full-Height Single Door B12 R or L FH B15 R or L FH B18 R or L FH B21 R or L FH B24 R or L FH Full-height door Adjustable sheles l l l GD l RTK l RTKP 34 1 / / 2 B24BUTT- B36BUTT Base Full-Height Double Door B24 BUTT FH B27 (Butt) FH B30 BUTT FH B33 BUTT FH B36 BUTT FH B39 FH B42 FH B48 FH Full-height door Adjustable sheles l l l GD l RTK l RTKP B39-B / 2 Base Three Drawer BD12 3 BD15 3 BD18 3 BD21 3 BD24 3 BD27 3 BD30 3 One standard drawer Two deep drawers l GD l RTK l RTKP Base Cabinets 34 1 / 2 Base Four Drawer BD12 BD15 BD18 BD21 BD24 Three standard height drawers One deep bottom drawer l GD l RTK l RTKP E4 Base Cabinets

67 34 1 / 2 Base Pots and Pans Storage Two Drawer BPPS30 2 BPPS36 2 Two 11 deep plywood drawers Solid wood drawers not aailable I Minimum Reduced Depth () is 21 I GD l RTK l RTKP 34 1 / 2 Base Pots and Pans Storage Four Drawer BPPS36 4 Two standard drawers Two deep drawers l GD l RTK l RTKP 34 1 / 2 Base Deep Drawer Combination BDDC30 2 TT BDDC36 2 TT One 7 deep plywood drawer One 11 deep plywood drawer One standard Roll-out Tray (ROT) aboe top drawer Solid wood drawers not aailable I Minimum Reduced Depth () is 21 I GD l RTK l RTKP Base Cabinets Base Cabinets E5

68 Wood Sink Base 34 ½ 34 ½ SB18-SB24 SB24BUTT- SB36BUTT One Drawer Front SB18 R or L W SB21 R or L W SB24 R or L W SB24 BUTT W SB27 (Butt) W SB30 BUTT W SB33 BUTT W SB36 BUTT W u SB39 W Two Drawer Fronts u SB42 W No shelf False drawer front(s) Optional Door Storage Unit (SBDSU) is aailable Optional Utensil Trays (UT and SUT) are aailable Includes a Touch-Up Kit (TUK) When you need an inerted frame for a sink base cabinet, consider using a regular base with a drawer instead of a sink base if plumbing allows. This way you get a working drawer at the bottom of your cabinet. l l l GD l RTK l RTKP u SB45 W 34 ½ u SB48 W SB39 u Deluxe Doetailed full-width Trays (DXFWT) not aailable 34 ½ SB42-SB48 Sink Base Multi-Storage Cabinet 34 1 / / 2 SBMS30 BUTT SBMS33 BUTT SBMS36 BUTT u SBMS39 u SBMS42 With Stainless Utensil Tray SBMS30 BUTT SUT SBMS33 BUTT SUT SBMS36 BUTT SUT u SBMS39 SUT No shelf False drawer front(s) Includes two Door Storage Units (SBDSU) and one Multi-Storage Shelf (SBMSSK) Sink Base Multi-Storage Shelf Kit (SBMSSK) shipped separately I Sink Base Multi-Storage Shelf Kit (SBMSSK) is Natural Birch plywood and does not come matching Includes a Touch-Up Kit (TUK) I GD l RTK l RTKP SUT u SBMS42 SUT u 3 center stile Deep Sink Base Base Cabinets 34 ½ 8 ¾ max cutout ½ 5 DSB30 BUTT DSB36 BUTT 3 stiles are routed to 1 1/2 in the door area Includes a Touch-Up Kit (TUK) Note: Be sure to follow manufacturer s specifications to ensure proper sink fit To aoid cutting the side walls of a sink base cabinet, make sure your sink base cabinet is at least 2 1/2 wider than the oerall width of your sink. If your oerall front-to-back sink depth is 22 1/2 or greater use a 27 deep sink base. l l l GD l RTK l RTKP E6 Base Cabinets

69 Sink Front 34 1 / / 2 SF18-SF24 SF24BUTT- SF36BUTT One Drawer Front SF18 R or L SF21 R or L SF24 R or L SF24 BUTT SF27 (Butt) SF30 BUTT SF33 BUTT SF36 BUTT SF39 Two Drawer Fronts Includes floor; shipped loose Optional Utensil Trays (UT and SUT) are aailable Unit is not trimmable Includes a Touch-Up Kit (TUK) l l FB GD RTK RTKP 34 1 / 2 SF42 SF45 SF48 SF / 2 SF42-SF48 34 ½ Sink Base Angle Specify R or L SBA36 R or L No shelf False drawer front Optional Utensil Trays (UT and SUT) are aailable Includes a Touch-Up Kit (TUK) Note: Full oerlay door styles use a 1/2 oerlay hinge Note: Will not accommodate double bowl sink l l GD l RTK RTKP Right shown / 4 17 When using a corner sink in your design, it is recommended to install at least a 15 cabinet between the corner sink and dishwasher. This will allow a comfortable space to load and unload the unit. 35 7/8, 41 1/8 35 7/8, 41 1/8 Sink Front Angle 34 ½ 16 3 / / / / / / 4 Specify R or L SFA36 R or L s SFA42 R or L s Aailable in full oerlay door styles only Includes 48 x 48 x 1/2 floor; floor shipped separately Optional Utensil Trays (UT and SUT) are aailable Toe kick shipped unattached Includes a Touch-Up Kit (TUK) Note: Full oerlay door styles use a 1/2 oerlay hinge l l FB GD RTK RTKP Base Cabinets 41 1/ / 4 Base Cabinets E7

70 Peninsula Base Cabinets PB 24 BUTT code width door type Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth GD -- Glass Doors RTK -- Recessed Toe Kick RTKP - Recessed Toe Kick Peninsula Peninsula side 34 1 / 2 Kitchen side Peninsula Base Single Door Specify R or L - hinging for kitchen side PB12 R or L PB18 R or L PB24 R or L One adjustable shelf False drawer front on peninsula side Both doors hinged on same end panel l l l GD l RTK RTKP Peninsula side Kitchen side Peninsula side 34 1 / 2 Peninsula Base Double Door PB24 BUTT PB30 BUTT PB36 BUTT One adjustable shelf One drawer front False drawer front on peninsula side l l Kitchen side l GD l RTK RTKP Peninsula side Kitchen side Base Cabinets 34 ½ Peninsula Base Full-Height Single Door Specify R or L - hinging for kitchen side PB12 R or L FH PB18 R or L FH PB24 R or L FH Adjustable sheles Both doors hinged on same end panel l l l GD l RTK RTKP E8 Peninsula Base Cabinets

71 34 ½ Peninsula Base Full-Height Double Door PB24 BUTT FH PB30 BUTT FH PB36 BUTT FH Adjustable sheles l l l GD l RTK RTKP Base Cabinets Peninsula Base Cabinets E9

72 Base Appliance Cabinets Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth RTK -- Recessed Toe Kick RTKP - Recessed Toe Kick Peninsula BMC code width depth height Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. 34 ½ Cabinet Width Base Oen Cabinet Uniersal BOCU27 BOCU30 BOCU33 BOCU36 Min. Width Max. Width Min. Height Max.* Height Adjustable plywood floor 3 stiles For undercounter mounting of single oens l l RTK RTKP ¾ 28 ¾ ¾ 18 ¾ 28 ¾ 28 ¾ ¾ 28 ¾ *Includes remoal of top rail Heat Shield 2 HSD 1/16 thick Two clear acrylic heat shields with installation screws FB RTK RTKP 30 Drop-in Range Panel DIP30 Matching front panel may be trimmed to fit drop-in range Toe kick included FB RTK Base Cabinets 8 RTKP 4 1 / 2 DIP30 E10 Base Appliance Cabinets

73 34 1 / 2 Base Microwae Cabinet w/deep Bottom Drawer Opening: Width: 21 ; Height: 16 BMC Opening: Width: 24 ; Height: 16 BMC Opening: Width: 27 ; Height: 16 BMC Deep bottom drawer Designed for countertop style microwaes l l RTK l RTKP 34 1 / 2 Base Microwae Cabinet w/deep Bottom Drawer Extended Opening Opening: Width: 24 ; Height: 19 BMCE Opening: Width: 27 ; Height: 19 BMCE Deep bottom drawer Designed for countertop style microwaes l RTK l RTKP 34 ½ 8 Base Built-in Microwae Cabinet BBMC BBMC BBMC BBMC Adjustable floor Plywood floor Drawer height is 4 Accepts manufacturer s trim kit l l RTK l RTKP Cabinet Max. Width Width Width Min. Height Max. Height Base Cabinets Base Appliance Cabinets E11

74 Base Corner Cabinets BBC 39 R or L code width blind Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth GD -- Glass Doors RTK -- Recessed Toe Kick RTKP - Recessed Toe Kick Peninsula Base Blind Corner Cabinet Information A B All Base Blind Corner (BBC) cabinets must be pulled. Consult chart or pull dimensions and minimum wall space requirements R or L indicates blind Door hinged on same side as blind on single door cabinets A 3 Base Filler (BF) is included with each Base Blind Corner (BBC) cabinet ordered, shipped separately. Base cabinet adjacent to BBC may be ordered with an extended stile in lieu of installing supplied filler C B Blind Right Shown A BBC39-51 C 3 Filler Base Cabinet Wall Space A ½ Oerlay Exposed Front B Door Open Min Max. Min Max C Cab. Width Wall Space A Full Oerlay Exposed Front B Door Open Min Max Min Max C BBC ½ 40 ¾ 13 ½ 16 ¾ ¼ 41 ¾ 14 ¼ 17 ¾ 9 36 P/BBC ½ 43 ¾ 16 ½ 19 ¾ ¼ 44 ¾ 17 ¼ 20 ¾ 39 BBC ½ 46 ¾ 19 ½ 22 ¾ ¼ 47 ¾ 20 ¼ 23 ¾ P/BBC ½ 49 ¾ 22 ½ 25 ¾ ¼ 50 ¾ 23 ¼ 26 ¾ BBC ½ 52 ¾ 25 ½ 28 ¾ 21" 48" 50 ¼ 53 ¾ 26 ¼ 29 ¾ 21" 48" SBB ½ 52 ¾ 25 ½ 28 ¾ 21" 48" 50 ¼ 53 ¾ 26 ¼ 29 ¾ 21" 48" Dimensions A and B minimum requirements include optional decoratie hardware clearances. You may deduct 1 1/4 if hardware is not used. Cab. Width Base Blind Cabinet Base Cabinets E12 Base Corner Cabinets

75 34 ½ Base Blind Corner Specify R or L BBC39 R or L BBC42 R or L BBC45 R or L BBC48 R or L BBC51 R or L Blind panel (stile) is 8 wide Blind opening is coered with an unfinished panel R or L indicates blind Right blind shown Door is hinged from blind panel Filler included One adjustable shelf Factory installed Roll-out Trays (ROT) are not aailable l l l GD l RTK l RTKP 5 1 / 2 27 PBBC / 2 Peninsula Base Cabinet 34 1 / 2 Peninsula Base Blind Corner 27 Wide PBBC27 One adjustable shelf Two 5 1/2 stiles on blind side allow cabinet to be used as right or left Reersible For use as a starter cabinet for peninsula Designed to fit flush against wall, cabinet may be pulled approximately 2 1/4. Full oerlay door styles require a pull of at least 1 from wall to allow decoratie hardware clearance. Filler included Working drawer and doors open to same side Remember, when using a 27 wide Peninsula Base Blind Corner cabinet (PBBC27), it is highly recommended to use peninsula cabinets on the adjacent run due to depth continuity. If regular base cabinets are used, the run will not be flush once the matching panel is applied. l l l GD l RTK RTKP Base Cabinet 5 ½ Stiles Angle Cabinet Information LSA/LSA WLS ¾ 17 Base Cabinets All dimensions are to outside of frame Base Corner Cabinets E13

76 34 1 / 2 Lazy Susan Angle Specify R or L LSA36 R or L Two 28 diameter rotating sheles Angled back proides clearance for installation 30 1/2 door clearance recommended for deliery Note: Full oerlay door styles use a 1/2 oerlay hinge l l GD l RTK RTKP / 2 Wood Lazy Susan Angle Specify R or L LSA36 R or L WLS Two 28 diameter rotating sheles Rotating sheles hae plywood floor and solid wood trim Sheles rotate independently Angled back proides clearance for installation 30 1/2 door clearance recommended for deliery Note: Full oerlay door styles use a 1/2 oerlay hinge l l GD l RTK RTKP 17 Do not design a corner cabinet adjacent to an object deeper than the end panel. The door of the corner cabinet may not function properly. Easy Reach Cabinet Information EZR/EZR SS/EZR WSS 33, / /8 6 3/8, 8 1/8 All dimensions are to outside of frame Base Cabinets 34 1 / 2 Easy Reach Specify R or L I EZR33 R or L EZR36 R or L I Glass door option not aailable One fixed shelf Frame opening, from left to right edge is 10 1/2 for EZR33 and 14 3/4 for EZR36 Face frame is scooped for hinge installation on full oerlay door styles Doors are profiled on one long and two short edges and are connected with hinges Angled back proides clearance for installation 29 door clearance recommended for deliery Do not put an appliance next to an Easy Reach (EZR) cabinet without proiding proper clearance for the door to operate. Also, the cabinet door should be hinged opposite the appliance. l I GD l RTK RTKP E14 Base Corner Cabinets

77 34 1 / 2 Easy Reach Super Susan Specify R or L I EZR33 R or L SS EZR36 R or L SS I Glass door option not aailable Two pie-cut 30 5/8 diameter, Viraguard interior rotating sheles Rotating sheles are attached to cabinet floor and fixed shelf Sheles rotate independently Frame opening, from left to right edge is 10 1/2 for EZR33 and 14 3/4 for EZR36 Face frame is scooped for hinge installation on full oerlay door styles Doors are profiled on one long and two short edges and are connected with hinges Angled back proides clearance for installation 29 door clearance recommended for deliery l I GD l RTK RTKP 34 1 / 2 Easy Reach Wood Super Susan Specify R or L I EZR33 R or L WSS EZR36 R or L WSS I Glass door option not aailable Two pie-cut sheles rotate indiidually EZR33 has 28 diameter sheles; EZR36 has 32 diameter sheles Rotating sheles hae plywood floor and solid wood trim Sheles rotate independently Frame opening, from left to right edge is 10 1/2 for EZR33 and 14 3/4 for EZR36 Face frame is scooped for hinge installation on full oerlay door styles Doors are profiled on one long and two short edges and are connected with hinges Angled back proides clearance for installation 29 door clearance recommended for deliery l I GD l RTK RTKP Base Cabinets Base Corner Cabinets E15

78 Asymmetrical Easy Reach EZR R or L code width depth hinging Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior RTK -- Recessed Toe Kick 34 1 / 2 33, 36 36, 33 Asymmetrical Easy Reach Specify R or L 33 deep EZR3633 R or L 36 deep EZR3336 R or L One fixed shelf Frame opening from left to right edge is 12 7/8 Face frame is scooped for hinge installation on full oerlay door styles Doors are profiled on one long and two short edges and are connected with hinges Angled back proides clearance for installation 29 door clearance recommended for deliery Example shown: EZR3336 L l l RTK 34 1 / 2 36, 33 33, 36 Asymmetrical Easy Reach Super Susan Specify R or L 33 deep EZR3633 R or L SS 36 deep EZR3336 R or L SS Two pie-cut 30 5/8 diameter, Viraguard interior rotating sheles Sheles rotate independently Frame opening from left to right edge is 12 7/8 Face frame is scooped for hinge installation on full oerlay door styles Doors are profiled on one long and two short edges and are connected with hinges Angled back proides clearance for installation 29 door clearance recommended for deliery Example shown: EZR3633 L SS l l RTK Base Cabinets E16 Asymmetrical Easy Reach

79 34 1 / 2 36, 33 33, 36 Asymmetrical Easy Reach Wood Super Susan Specify R or L 33 deep EZR3633 R or L WSS 36 deep EZR3336 R or L WSS Two pie-cut 28 diameter rotating sheles Sheles rotate independently Rotating sheles hae plywood floor and solid wood trim Frame opening from left to right edge is 12 7/8 Face frame is scooped for hinge installation on full oerlay door styles Doors are profiled on one long and two short edges and are connected with hinges Angled back proides clearance for installation 29 door clearance recommended for deliery Example as shown: EZR3633 L WLS l l RTK Base Cabinets Asymmetrical Easy Reach E17

80 Base End Run Cabinets BEOS R or L code width depth destination Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth GD -- Glass Doors RTK -- Recessed Toe Kick 34 1 / / / / 8 Base End Corner BEC24 One adjustable shelf Can be installed on either right or left end l l FB l l GD RTK 23 7 / / / / 2 45 Base End Angle Specify R or L BEA12 R or L Right shown Two adjustable sheles Full-height door One optional tray diider aailable in center location only I Recessed Toe Kick (RTK) aailable hinge side only I Minimum Reduced Depth () is 18 Note: Full oerlay door styles use a 1/2 oerlay hinge l I l GD I RTK 17 Base End Open Shelf Base Cabinets 34 ½ 115/8 R 9 3/16 9 3/16 9 3/16 Specify R or L BEOS1224 R or L 5/8 wood eneer construction 1 3/16 thick bottom shelf Three fixed sheles I Reduced Depth () aailable in 3 increments to a minimum of 12 Example: BEOS1224R- reduce depth to 18 l I FB GD RTK Left shown E18 Base End Run Cabinets

81 34 ½ 8 ¾ 8 ¾ 8 ¾ Peninsula Base End Open Shelf PBEOS /8 radius 5/8 wood eneer construction; back is 11/16 when option is chosen 1 3/16 thick top and bottom sheles Three fixed sheles Back may be notched in field for continuous toe kick applications l FB GD RTK 12 5/8 Base Cabinets Base End Run Cabinets E19

82 Base Specialty Cabinets BTP 12 Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth GD -- Glass Doors RTK -- Recessed Toe Kick RTKP - Recessed Toe Kick Peninsula code width Specifications subject to change without notice. Base Filler Pull-out ¾ Install decoratie hardware prior to attaching filler to pull-out unit Filler BFP3 1 3/4 shelf width Three adjustable sheles Unit slides on full extension side-mount runners Recommended installation is between two cabinets Installation may also be made between a cabinet and a wall or a cabinet and an end panel with stile Filler is included, but unattached. Unit should be installed before remoing shipping brace and attaching filler A filler oerlay is recommended for full oerlay door styles; must be ordered separately No toe kick FB GD RTK RTKP Filler Side View Do not use filler pullouts (WFP or BFP) at the end of cabinet runs or next to appliances. They must be installed between two cabinets or a cabinet and an end panel. Base Cabinets 34 ½ Base Tray Pull-out un BTP9 BTP12 u Recessed Toe Kick Both Sides (RTKB) not aailable n Recessed Toe Kick Peninsula Both Sides (RTKPB) not aailable Unit slides on full extension under-mount Soft-Close runners Center tray diider can be remoed Chrome rack with T-Bar included to subdiide sections for customized compartments l GD I RTK I RTKP 9 E20 Base Specialty Cabinets

83 Base Pantry Pull-out 34 1 / 2 un BPP9 BPP12 4 1/2 shelf width 7 1/2 shelf width u Recessed Toe Kick Both Sides (RTKB) not aailable n Recessed Toe Kick Peninsula Both Sides (RTKPB) not aailable Two adjustable sheles One fixed wood shelf attached to the bottom of a full-height door Unit slides on full extension under-mount Soft-Close runners l GD I RTK I RTKP Base Wine Rack 34 1 / 2 BWR6 Wood eneer construction with 1/2 end panels Four fixed sheles Bottle stop pin placed at 12 (remoable) Vinyl edge banding applied to edges of cabinet Recommended installation is between two cabinets I Minimum Reduced Depth () is for laminate door styles; 6 for wood door styles I Only aailable with Recessed Toe Kick Peninsula Back (RTKP); cannot accommodate Recessed Toe Kick for sides (RTKPB, RTKPL, RTKPR) Note: This cabinet features frameless type construction FB I GD RTK I RTKP 34 1 / 2 Base Spice Drawer Cabinet BSDC6 Wood eneer construction with 1/2 end panels Drawer boxes hae 1/2 sides and 3/4 floor, front and back Interior drawer depth 22 from front to back Solid wood drawer fronts Drawer front is adjustable All drawer boxes are Natural Birch wood eneer plywood Drawer box slides along wood guide. Wood guide is used to keep drawers from moing left to right. Matching wood knobs included, not installed Vinyl edge banding applied to edges of cabinet Recommended installation is between two cabinets I Only aailable with Recessed Toe Kick Peninsula Back (RTKP); cannot accommodate Recessed Toe Kick for sides (RTKPB, RTKPL, RTKPR) Note: This cabinet features frameless type construction FB GD RTK I RTKP Base Cabinets Base Specialty Cabinets E21

84 34 1 / 2 Base w/pots and Pans Organizer B30 BUTT BPPSO B36 BUTT BPPSO 4 high Roll-out Tray with integrated shelf system Roll-out sides, back and sheles are 1/2 wood eneer plywood l l GD l RTK l RTKP 34 1 / 2 Base Top Mount Wastebasket Single Sidemount Soft-Close BWBT15 SC Includes 35 qt. capacity white basket(s) Basket(s) rest in a Natural Maple plywood frame Basket(s) are easily remoable for emptying or cleaning Frame slides on Soft-Close, full extension glides Optional Wastebasket Lid (WBL) aailable for 35 and 50 qt. wastebaskets GD l RTK l RTKP 34 1 / 2 BWBT15 2 Base Top Mount Wastebasket Double Sidemount Soft-Close BWBT15 2 SC Two 27 qt. capacity white baskets BWBT18 2 SC Two 35 qt. capacity white baskets Basket(s) rest in a Natural Maple plywood frame Basket(s) are easily remoable for emptying or cleaning Frame slides on Soft-Close, full extension glides Optional Wastebasket Lid (WBL) aailable for 35 and 50 qt. wastebaskets GD l RTK l RTKP 34 1 / 2 BWBT18 2 Base Cabinets 34 ½ BWBT15 FH 34 ½ Base Top Mount Wastebasket Full-Height Sidemount Soft-Close BWBT15 FH SC BWBT21 2 FH SC One or two 50 qt. capacity grey baskets Basket(s) rest in a Natural Maple plywood frame Basket(s) are easily remoable for emptying or cleaning Frame slides on Soft-Close, full extension glides Optional Wastebasket Lid (WBL) aailable for 35 and 50 qt. wastebaskets l GD l RTK l RTKP BWBT21 2 FH E22 Base Specialty Cabinets

85 Base Cabinet Accessories BC 3 27 code width depth Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth Base Wastebasket Kit BWBFMK BWBFMK 2 35 qt. capacity BWBFMK Fits: B15 B48 27 qt. capacity BWBFMK 2 Fits: B15-B48 Floor mount Includes white basket(s) Wastebasket(s) are held in by epoxy coated wire cage Basket(s) are easily remoable for emptying or cleaning Field installation only Optional Wastebasket Lid (WBL) aailable for 35 and 50 qt. wastebaskets FB Wastebasket Lid Fits 35 qt. Wastebaskets WBL35 G Grey WBL35 W White Fits 50 qt. Wastebaskets Lid flips open manually Lid holds can liner in place FB WBL50 G Grey WBL50 W White Replacement Wastebasket RWB27 RWB35 RWB50 RCWB50 27 qt. White 35 qt. White 50 qt. White 50 qt. Grey Field installation only Optional Wastebasket Lid (WBL) aailable for 35 and 50 qt. wastebaskets FB Base Cabinets Base Cabinet Accessories E23

86 Base Blind Corner Wood Lazy Susan Kit Specify R or L Blind LSK42 R or L WLS LSK45 R or L WLS LSK48 R or L WLS Aailable for 42, 45 and 48 base blind cabinets Kit includes two half circle sheles that rotate out indiidually and mounting hardware Rotating sheles hae plywood floor and solid wood trim Right blind shown Field installation only FB Wire Tray Diider Kit 19 5 / 8 WTDK12 WTDK18 12 high 18 high Installation clips and screws included White epoxy coated wire Field installation only FB / 8 Sink Base Multi-Storage Shelf Kit 18 SBMSSK 3/4 Natural Birch plywood Installation instructions included Field installation only FB / 16, / 16 Utensil Tray or Kit Base Cabinets 3 5 / / 16 Cabinet Tray Order for field installed kit SBA UTK18 SFA UTK18 SFA UTK24 SB UTK18 SB UTK(cabinet width) SB UTK(cabinet width) SB UTK(cabinet width) Installed UT Kit UTK18 UTK21 UTK24 UTK27 UTK30 UTK33 UTK36 UTK39 UTK42 UTK45 UTK48 Almond or White, high-impact polystyrene tray Kit includes all mounting hardware Tilts down for conenient access to small cleaning items, etc. Example: Factory Installed SB24-UT Field Installed Kit UTK 24 Note: When ordering for field installation, be sure to specify the cabinet width FB E24 Base Cabinet Accessories

87 11 1 / 4, 14 1 / Cabinet 1 1 / 4 Tray Order for field installed kit SBA SUTK18 SFA SUTK18 SFA SUTK24 SB SUTK18 SB SUTK(cabinet width) SB SUTK(cabinet width) SB SUTK(cabinet width) Stainless Utensil Tray or Kit Installed SUT Kit SUTK18 SUTK21 SUTK24 SUTK27 SUTK30 SUTK33 SUTK36 SUTK39 SUTK42 SUTK45 SUTK48 Stainless steel tray Tilts down for conenient access to small cleaning items, etc. Kit includes all mounting hardware Example: Factory Installed SB18R-SUT Field Installed Kit SUTK 18 Note: When ordering for field installation, be sure to specify the cabinet width FB 1 1 / / / 16 Knife Section or Kit Installed KS15 9 KS18 12 KS21 15 KS24 18 # knife slots Solid wood, slotted knife holder is 9 11/16 deep Cork pad protects drawer bottom, knife handles and edges Slots are 1/8 wide, spaced 1 apart FB Kit # knife slots KSK15 9 KSK18 12 KSK21 15 KSK24 18 Cutting Center or Kit Installed CC15 CC18 CC21 CC24 2 1/4 high drawer box with cutting board installed aboe Cutting board must be remoed for use Example: Factory Installed B15L-CC15 Field Installed Kit CCK15 FB Kit CCK15 CCK18 CCK21 CCK24 Knife Section Cutting Center or Kit Installed KSCC15 9 KSCC18 12 KSCC21 15 KSCC24 18 Kit KSCCK15 9 KSCCK18 12 KSCCK21 15 KSCCK24 18 # knife slots # knife slots 2 1/4 high drawer box with cutting board installed aboe Cutting board must be remoed for use Has remoable knife section installed in drawer Example: Factory Installed B15L-KSCC15 Field Installed Kit KSCCK15 FB Base Cabinets Base Cabinet Accessories E25

88 Chopping Block or Kit Installed CHB18 CHB21 CHB24 Kit CHBK18 CHBK21 CHBK24 2 1/4 high drawer box with 1 1/4 thick solid wood block installed aboe drawer box Chopping block must be remoed for use Cannot be installed in one side of a double drawer (side by side) cabinet Example: Factory Installed B18L-CHB18 Field Installed Kit CHBK18 FB Cutting Board Door Rack Kit CBDMK18 Fits 18 doors - 9 3/4 x 15 3/4 cutting board CBDMK21 Fits 21 doors /4 x 15 3/4 cutting board CBDMK24 Fits 24 doors /4 x 15 3/4 cutting board Lightweight, high density polyethylene Able to be cleaned thoroughly, eliminating bacteria and odor Approed by FDA (Food and Drug Administration) ITEM 2.1 REG. #1CRF Approed by the National Sanitation Foundation No. 721 Cannot be used with full-depth sheles or Roll-out Trays (ROT) Dishwasher safe up to 180 F Manufactured with high capacity juice grooes Non-abrasie; reduces the dulling of cutting blades Solid maple caddy with mounting sockets and screws FB Cutlery Diider or Kit Installed CD15 CD18 CD21 CD24 1/2 thick solid wood diiders 1 3/4 high Each section is 13 deep and approximately 3 7/8 wide Example: Factory Installed BD15-CD15 Field Installed Kit CDK15 FB Kit CDK15 3 sections CDK18 3 sections CDK21 4 sections CDK24 4 sections Spice Drawer Insert or Kit Base Cabinets 19 1 / / 8 Installed SDI15 SDI18 SDI21 SDI24 Kit SDIK15 SDIK18 SDIK21 SDIK24 Solid wood insert holds spice containers at an angle for easy identification and remoal Example: Factory Installed B15R-SDI15 Field Installed Kit SDIK15 FB E26 Base Cabinet Accessories

89 Wood Tiered Drawer Storage or Kit Installed WTCD15 5/5 WTCD18 6/6 WTCD21 7/7 WTCD24 8/8 Kit WTCDK15 5/5 WTCDK18 6/6 WTCDK21 7/7 WTCDK24 8/8 Upper/Lower Sections Sliding top tray Aailable factory installed for 24 deep cabinets only Example: Factory Installed BD15-WTCD15 Field Installed Kit WTCDK15 FB Sink Base Door Storage Unit or Kit Installed SBDSU30 R or L SBDSU33 R or L SBDSU36 R or L SBDSU39 R or L SBDSU42 R or L Kit SBDSUK30 SBDSUK33 SBDSUK36 SBDSUK39 SBDSUK42 also fits SB18 also fits SB21 also fits SB18 also fits SB21 Solid wood Two fixed sheles, 4 deep Kit includes all mounting hardware Rack is 5 deep FB Sink Base Plastic Bag Door Storage Unit or Kit Installed SBPBS30 R or L SBPBS33 R or L SBPBS36 R or L SBPBS39 R or L Kit SBPBSK30 SBPBSK33 SBPBSK36 SBPBSK39 also fits SB18 also fits SB18 Solid wood and plywood construction Kit includes all mounting hardware Rack is 5 deep Remoable, almond plastic tray lines upper shelf Bag storage box features two openings to insert and remoe plastic bags FB Pegged Drawer Organizer /32 PDO Kit PDO30 Eight pegs PDO36 Ten pegs Pack-Additional pegs PDOPK Two pegs 3/4 natural birch plywood floor Sized to fit deep drawers Fits 7 and 11 high drawers Trimmable Doors and panel are shipped separately; field assembly required FB Base Cabinets PDOPK Base Cabinet Accessories E27

90 17 3 / 4 Sliding Towel Bar STB Mounts to cabinet end panel Pulls-out 8 3/4 for easy access Three satin finish chrome towel bars Field installation only FB 4 90 Base Filler BF3 BF6 BF3X3 3/4 thick solid wood No toe kick FB 30 BF BF 3x3 29 5/8 Base Filler Oerlay BFOL3 BFOL6 Aailable in full oerlay door styles only Filler ordered separately Filler oerlay has routed door profile and is solid wood FB 1 1 / 2 Base Fluted Filler BFF3 BFF6 3/4 thick solid wood FB Base Cabinets 34 1 / 2 6 E28 Base Cabinet Accessories

91 Filler Extension FE3 30 3/4 thick solid wood FB Filler Extension Filler Extension Application Fluted Filler Extension 1 1 / 2 FFE3 30 3/4 thick solid wood FB / 2 3 Fluted Filler Extension Filler Extension Application Base Column 34 1 / 2 3 / 4 BC327 Front is 3/4 solid wood Finished front and both sides Reersible, may be used on either right or left end I standard when option is selected I FB l 3 / 4 27 Base Fluted Column 34 1 / / 2 3 / 4 3 / 4 BFC327 Fluted front is 3/4 solid wood Finished front and both sides Reersible, may be used on either right or left end I standard when option is selected I FB l Base Cabinets Base Cabinet Accessories E29

92 34 1 / 2 Base End Panel WBEP 24 x 34 1/2 x 13/16 Wood eneer construction Edgebanded one long edge Finished to match exterior both sides I panel is 11/16 thick I FB 34 1 / 2 Base End Panel w/stile Specify R or L BEP 1 1/2 R or L BEP3 R or L Exterior finished to match, interior is Natural Birch Viraguard and machined to match a cabinet end panel Left shown l l 34 1 / 2 ¾ 23 7 / 8 3 / 16 Matching Base End Panel Specify R or L MBEP R or L Peninsula PMBEP 3/4 thick panel with matching door edge profile on front edge only Peninsula panel has routed door profile front and back Slab door styles do not hae grooes and will not fit flush against 1/2 end panel. A 3/16 shim is recommended. Inside of matching panel bottom rail will line up with inside bottom rail of door Left shown Field installation only Not aailable in mitered door styles; use End Panel Mitered FB Standard edge detail fits flush against 1/2 end panel and behind face frame When designing with Matching End Panels the reeal will differ from the cabinet door height reeal. Matching End Panels coer the entire side of the cabinet. See drawing for exact measurements Base Cabinets 34 1 / / 8 Furniture Matching Base End Panel Specify R or L FMBEP R or L Peninsula FPMBEP 3/4 thick panel with matching door edge profile on front edge only Peninsula panel has routed door profile front and back Inside of matching panel bottom rail will line up with inside bottom rail of door For use with Furniture Plywood Ends (FB) flush ends Left shown Field installation only Not aailable in mitered door styles; use End Panel Mitered FB E30 Base Cabinet Accessories

93 34 1 / / 8 Matching Base End Panel Mitered M MBEP 3/4 thick panel with matching door edge profile on four sides Inside of matching panel bottom rail will line up with inside bottom rail of door Aailable in mitered door styles only Reersible, may be used on either right or left end Field installation only Toe kick shipped unattached FB Will not fit flush against 1/2 end panel, a 3/16 shim is recommended 96 Toe Kick MTK8 1/8 thick hardboard, 4 1/2 high, laminated with matching Viraguard WMTK8 3/16 thick wood eneer, 4 1/2 high, to match Edges are unfinished Field installation only Note: Matching toe kick is not automatically supplied with cabinets. It must be ordered as a separate item Apply Quarter Round molding (QR8) at the base of Matching Toe Kicks or Wood Matching Toe Kicks (MTK8 or WMTK8) for a nice, finished look. FB Base Cabinets Base Cabinet Accessories E31

94 Diagonal Installation of Standard Base Cabinets D C C D Optional Wall B A Note: Fillers are always recommended at both sides of cabinet junction points to allow for wall ariations and drawer clearances. Cabinet Width A Cabinet Depth B Wall Dimensions C Wall Dimensions D ½ 32 ½ ⅝ 34 ⅝ ¾ 36 ¾ ⅞ 38 ⅞ ⅛ 43 ¼ ¼ 45 ¼ ⅜ 47 ⅜ ½ 49 ½ ⅝ 51 ⅝ ¾ 53 ¾ ⅞ 55 ⅞ Base Cabinets E32 Base Cabinet Accessories

95 Tall Cabinets U R or L code width depth height hinging ½ U ½ U24 BUTT- U36 BUTT Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Note: Standard tall cabinet box depth is 24 unless stated otherwise. Add door thickness with bumpers for total depth. When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn t required on an order form. Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. Utility Cabinets Specify R or L 84 High U R or L U R or L U R or L U R or L U R or L U BUTT U (Butt) U BUTT U BUTT U BUTT 87 High U R or L U R or L U R or L U R or L U R or L U BUTT U (Butt) U BUTT U BUTT U BUTT 90 High U R or L U R or L U R or L U R or L U R or L U BUTT U (Butt) U BUTT U BUTT U BUTT 93 High U R or L U R or L U R or L U R or L U R or L U BUTT U (Butt) U BUTT U BUTT U BUTT 96 High U R or L U R or L U R or L U R or L U R or L U BUTT U (Butt) U BUTT U BUTT U BUTT -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth GD -- Glass Doors RTK -- Recessed Toe Kick Includes adjustable sheles in upper section: 84 & 87 high one shelf; 90 & 93 high two sheles; 96 high three sheles No center rail on tall door for S.Cayden, S.Malibu and S.Templeton door styles Factory installed Roll-out Trays (ROT) are not aailable on Utility Cabinets wider than Toe kick is shipped separately on 93 & 96 high cabinets I RTK not aailable on 93 & 96 high cabinets I Glass doors aailable for top doors only Note: Shelf Kit (SK) for lower section must be ordered separately; see Sheling section of this book Remember to order a 3/16 skin (WSK) for the exposed ends of 93 & 96 high cabinets to conceal the seam between the loose toe kick and the cabinet. l l l l I GD I RTK Tall Cabinets Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation. Tall Cabinets F1

96 Tall Cabinets ½ U15-U24 23 ½ U24BUTT- U36BUTT Specify R or L 84 High Utility Roll-out Tray U R or L 4ROT U R or L 4ROT U R or L 4ROT U R or L 4ROT U BUTT 4ROT U (Butt) 4ROT U BUTT 4ROT U BUTT 4ROT U BUTT 4ROT 87 High U R or L 4ROT U R or L 4ROT U R or L 4ROT U R or L 4ROT U BUTT 4ROT U (BUTT) 4ROT U BUTT 4ROT U BUTT 4ROT U BUTT 4ROT 90 High U R or L 4ROT U R or L 4ROT U R or L 4ROT U R or L 4ROT U BUTT 4ROT U (Butt) 4ROT U BUTT 4ROT U BUTT 4ROT U BUTT 4ROT 93 High U R or L 4ROT U R or L 4ROT U R or L 4ROT U R or L 4ROT U BUTT 4ROT U (Butt) 4ROT U BUTT 4ROT U BUTT 4ROT U BUTT 4ROT 96 High U R or L 4ROT U R or L 4ROT U R or L 4ROT U R or L 4ROT U BUTT 4ROT U (Butt) 4ROT U BUTT 4ROT U BUTT 4ROT U BUTT 4ROT Four adjustable Roll-out Trays (ROT) included in lower section Includes adjustable sheles in upper section: 84 & 87 high one shelf; 90 & 93 high two sheles; 96 high three sheles No center rail on tall door for S.Cayden, S.Malibu and S.Templeton door styles Roll-out Trays (ROT) shipped separately on wide units Toe kick is shipped separately on 93 & 96 high cabinets I Roll-out Trays (ROT) cannot be included when a Reduced Depth () option of less than 18 is selected I wide units not aailable with Reduced Depth () I RTK not aailable on 93 & 96 high cabinets I Glass doors aailable for top doors only Remember to order a 3/16 skin (WSK) for the exposed ends of 93 & 96 high cabinets to conceal the seam between the loose toe kick and the cabinet. l I I GD I RTK ½ Multi Storage Pantry 36 Wide MSP MSP MSP MSP MSP Eight 7 1/8 deep adjustable sheles in lower section, four on each side of center partition Two 4 deep storage racks with fie fixed sheles Two 6 1/2 deep double-sided swing-out storage racks with fie fixed sheles Includes adjustable sheles in upper section: 84 & 87 high one shelf; 90 & 93 high two sheles; 96 high three sheles No center rail on tall door for S.Cayden, S.Malibu and S.Templeton door styles Toe kick is shipped separately on 93 & 96 high cabinets I RTK not aailable on 93 & 96 high cabinets I Glass doors aailable for top doors only Note: Swing-out sheles operate within a 90 door opening l I GD I RTK F2 Tall Cabinets Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation.

97 Tall Appliance Cabinets OC BUTT U code width depth height door type cab type Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Note: Standard tall cabinet box depth is 24 unless stated otherwise. Add door thickness with bumpers for total depth. Material dimensions may ary slightly based on lumber industry standards. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth GD -- Glass Doors RTK -- Recessed Toe Kick Tall Cabinets Specifications subject to change without notice ½ Oen Cabinet Single w/3 Stiles 84 High OC (Butt)S OC (Butt)S OC BUTTS u OC S 87 High OC (Butt)S OC (Butt)S OC BUTTS u OC S 90 High OC (Butt)S OC (Butt)S OC BUTTS u OC S 93 High OC (Butt)S OC (Butt)S OC BUTTS u OC S 96 High OC (Butt)S OC (Butt)S OC BUTTS u OC S Includes adjustable sheles in upper section: 84 & 87 high no sheles; 90 & 93 high one shelf; 96 high two sheles Field installed Roll-out Trays (ROT) may be installed in lower compartment as follows: OC 27 utilizes ROT 24; Deluxe Doetailed Roll-out Tray not aailable OC 30 utilizes ROT 27; Deluxe Doetailed Rollout Tray not aailable OC 33 utilizes ROT 15 or 30; Deluxe Doetailed Roll-out Tray not aailable OC 39 utilizes ROT 18 or 36; Deluxe Doetailed Roll-out Tray not aailable Factory installed Roll-out Trays (ROT) are not aailable I RTK not aailable on 93 & 96 high cabinets I Glass doors aailable for top doors only Note: When ordering glass doors in full oerlay door styles, a portion of the 3 face frame will be isible Remember to order a 3/16 skin (WSK) for the exposed ends of 93 & 96 high cabinets to conceal the seam between the loose toe kick and the cabinet. FB l l I GD I RTK u 3 center stile Cut out dimensions 1/2 Oerlay Full Oerlay Cabinet Width Min. Width Max. Width Min. Height Max. Height H Max. Height 90 H Max. Height H Max. Height 90 H Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation. Tall Appliance Cabinets F3

98 Tall Cabinets ½ Oen Cabinet Double w/3 Stiles 84 High OC (Butt)D OC (Butt)D OC BUTTD 87 High OC (Butt)D OC (Butt)D OC BUTTD 90 High OC (Butt)D OC (Butt)D OC BUTTD 93 High OC (Butt)D OC (Butt)D OC BUTTD 96 High OC (Butt)D OC (Butt)D OC BUTTD Includes adjustable sheles in upper section: 84 & 87 high no sheles; 90 & 93 high one shelf; 96 high two sheles I RTK not aailable on 93 & 96 high cabinets Toe kick is shipped separately on 93 & 96 high cabinets Note: When ordering glass doors in full oerlay door styles, a portion of the 3 face frame will be isible l l l GD I RTK Cut out dimensions 1/2 Oerlay Full Oerlay Cabinet Width Min. Width Max. Width Min. Height Max. Height H Max. Height 90 H Max. Height H Max. Height 90 H ½ Oen Cabinet Double Extended Opening w/3 Stiles 84 High OC (Butt)DE OC (Butt)DE OC BUTTDE 87 High OC (Butt)DE OC (Butt)DE OC BUTTDE 90 High OC (Butt)DE OC (Butt)DE OC BUTTDE 93 High OC (Butt)DE OC (Butt)DE OC BUTTDE 96 High OC (Butt)DE OC (Butt)DE OC BUTTDE Cabinet Width Min. Width Max. Width H Cabinet Min. Height Max. Height Includes adjustable sheles in upper section: 84 & 87 high no sheles; 90 & 93 high one shelf; 96 high two sheles I RTK not aailable on 93 & 96 high cabinets Toe kick is shipped separately on 93 & 96 high cabinets Note: When ordering glass doors in full oerlay door styles, a portion of the 3 face frame will be isible Remember to order a 3/16 skin (WSK) for the exposed ends of 93 & 96 high cabinets to conceal the seam between the loose toe kick and the cabinet. Cut out dimensions H Cabinet Min. Max. Height Height 1/2 Oerlay Max. Height Full Oerlay Min. Height H Cabinet Max. Height 1/2 Oerlay l l l GD I RTK Max. Height Full Oerlay F4 Tall Appliance Cabinets Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation.

99 ½ cutout dimensions 23 ½ ¼ 50 ½ 60 Oen Cabinet Uniersal 84 High u OC (Butt)U s OC BUTTU s OC BUTTU 87 High u OC (Butt)U s OC BUTTU s OC BUTTU 90 High u OC (Butt)U s OC BUTTU s OC BUTTU 93 High u OC (Butt)U s OC BUTTU s OC BUTTU 96 High u OC (Butt)U s OC BUTTU s OC BUTTU Includes adjustable sheles in upper section: 84 & 87 high no sheles; 90 & 93 high one shelf; 96 high two sheles Adjustable floor Three standard height drawers One deep drawer Drawers are remoable to accommodate increased oen height I RTK not aailable on 93 & 96 high cabinets Toe kick is shipped separately on 93 & 96 high cabinets Most major appliance manufacturers will tell you that their 27 wide oens will fit into a 27 oen cabinet and their 30 wide oens will fit into a 30 cabinet. In most cases this is true. Howeer, the look this creates may not be appealing because the stiles will be concealed by the appliance. To sole this problem, you can order a 30 oen cabinet for a 27 oen and a 33 oen cabinet for a 30 oen, etc. l l l GD I RTK Tall Cabinets u 3 stiles s 4 1/2 stiles routed to 1 1/2 in the door area Cabinet Width Min. Width Cut out dimensions 1/2 Oerlay Max. Min. Max. Width Height Height Full Oerlay Max. Height Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation. Tall Appliance Cabinets F5

100 Tall Cabinets Tall Cabinet Accessories Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth TFOL 3 96 code width height Tall Filler 84 High TF3 84 TF High 3/4 thick solid wood No toe kick FB 79 ½ 82 ½ 85 ½ 88 ½ 91 ½ TF3 87 TF High TF3 90 TF High TF3 93 TF High TF3 96 TF /8 26 5/8 29 5/8 32 5/8 35 5/8 Tall Filler Oerlay TFOL3 84 TFOL6 84 TFOL3 87 TFOL6 87 TFOL3 90 TFOL6 90 TFOL3 93 TFOL6 93 TFOL3 96 TFOL6 96 Aailable in full oerlay door styles only Filler oerlay has routed door profile and is solid wood Filler ordered separately FB 55 5/8 F6 Tall Cabinet Accessories Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation.

101 Tall Fluted Filler High TFF3 84 TFF High TFF3 87 TFF High TFF3 90 TFF High 3/4 thick solid wood FB Tall Cabinets TFF3 93 TFF High TFF3 96 TFF6 96 Tall Column / 4 3 / 4 84 High TC High TC High TC High TC High TC32796 Front is 3/4 solid wood Finished front and both sides Reersible, may be used on either right or left end I standard when option is selected I FB l 27 Tall Fluted Column / 4 3 / 4 84 High TFC High TFC High TFC High TFC High TFC32796 Fluted front is 3/4 solid wood Finished front and both sides Reersible, may be used on either right or left end I standard when option is selected I FB l 27 6 Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation. Tall Cabinet Accessories F7

102 Tall End Panel Tall Cabinets Wide, 13/16 Thick WTEP84 WTEP87 WTEP90 WTEP93 WTEP96 Finished to match exterior both sides Front edge banded to match panel is 11/16 thick l FB Tall End Panel w/stile Specify R or L 84 High TEP1 1/2 84 R or L TEP3 84 R or L 87 High Left shown Toe kick shipped attached Exterior finished to match, interior is Natural Birch Viraguard and machined to match a cabinet end panel l l TEP1 1/2 87 R or L TEP3 87 R or L 90 High TEP1 1/2 90 R or L TEP3 90 R or L 93 High TEP1 1/2 93 R or L TEP3 93 R or L 96 High TEP1 1/2 96 R or L TEP3 96 R or L Refrigerator End Panel w/stile 24 Deep 84 High REP1 1/2 84 REP3 84 Reersible l l 87 High REP1 1/2 87 REP High REP1 1/2 90 REP High REP1 1/2 93 REP High REP1 1/2 96 REP3 96 F8 Tall Cabinet Accessories Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation.

103 ¾ 3/ /8 Standard edge detail fits flush against 1/2 end panel and behind face frame Matching Tall End Panel Specify R or L 84 High MTEP2484 R or L 87 High MTEP2487 R or L 90 High MTEP2490 R or L 93 High MTEP2493 R or L 96 High MTEP2496 R or L 3/4 thick panel with matching door edge profile on front edge only Inside of matching panel bottom rail will line up with inside bottom rail of door Left shown Field installation only Not aailable in mitered door styles; use End Panel Mitered Not aailable in slab door styles When designing with Matching End Panels the reeal will differ from the cabinet door height reeal. Matching End Panels coer the entire side of the cabinet. See drawing for exact measurements FB Tall Cabinets Furniture Matching Tall End Panel Specify R or L 84 High FMTEP2484 R or L 87 High FMTEP2487 R or L 90 High FMTEP2490 R or L 93 High FMTEP2493 R or L 96 High 3/4 thick panel with matching door edge profile on front edge only Inside of matching panel bottom rail will line up with inside bottom rail of door Left shown Field installation only For use with Furniture Plywood Ends (FB) flush ends Not aailable in mitered door styles; use End Panel Mitered Not aailable in slab door styles FB FMTEP2496 R or L 23 7/ Matching Tall End Panel Mitered 84 High M MTEP High M MTEP High M MTEP High M MTEP High 3/4 thick panel with matching door edge profile on four sides Inside of matching panel bottom rail will line up with inside bottom rail of door Field installation only Reersible, may be used on either right or left end Top, bottom and toe kick shipped separately Aailable in mitered door styles only FB M MTEP /8 Will not fit flush against 1/2 end panel, a 3/16 shim is recommended Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation. Tall Cabinet Accessories F9

104 Tall Cabinets Toe Kick MTK8 1/8 thick hardboard, 4 1/2 high, laminated with matching Viraguard WMTK8 3/16 thick wood eneer, 4 1/2 high, to match Edges are unfinished Field installation only Note: Matching toe kick is not automatically supplied with cabinets. It must be ordered as a separate item Apply Quarter Round molding (QR8) at the base of Matching Toe Kicks or Wood Matching Toe Kicks (MTK8 or WMTK8) for a nice, finished look. FB 96 F10 Tall Cabinet Accessories Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation.

105 Diagonal Installation of Standard Tall Cabinets Option #1 Tall Cabinets D C C D Optional Wall B A Option #2 D D B A Cabinet Width A Cabinet Depth B Wall Dimensions C Wall Dimensions D Cabinet Depth B Wall Dimensions C Wall Dimensions D ¼ 23 ¼ ⅜ 34 ⅝ ⅜ 25 ⅜ ¾ 36 ¾ ⅝ 29 ⅝ N/A N/A N/A ⅛ ⅞ 33 ⅞ ¼ N/A N/A N/A ⅜ ⅛ 38 ⅛ ½ 49 ½ Note: Remember to remoe the white plastic feet from the bottom of all tall cabinets before installation. Their sole purpose is to protect the floor after the cabinets are unboxed. Leaing them on will result in uneen installation. Tall Cabinet Accessories F11

106 Notes Tall Cabinets F12 Notes

107 Vanity Cabinets Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Note: Standard anity cabinet box depth is 18 or 21 unless stated otherwise. Add door thickness for total depth. Standard anity cabinet height is 34 1/2 unless stated otherwise. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth GD -- Glass Doors RTK -- Recessed Toe Kick VSB code width depth height All double door cabinets will hae butt doors unless stated otherwise. Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. Vanity Cabinets 34 ½ 18, 21 Vanity Sink Base Double Door 18 Deep VSB VSB VSB Deep VSB VSB VSB VSB VSB Single or double drawer front Optional Utensil Trays (UT and SUT) are aailable l l GD l RTK 34 ½ VSB42 Vanity Sink Base Four Door i VSB VSB VSB i Center door hinged left only Two working drawers with one false drawer front l l l GD l RTK 34 ½ VSB48-60 Vanity Cabinets G1

108 Vanity Sink Base Two Drawer VSB Two working drawers 18 center section with false drawer front l l l GD 34 ½ l RTK 21 Vanity Cabinets Vanity Sink Base Three Drawer VSB Two pair of butt doors Three drawer stack in center l l l GD 34 ½ l RTK 21 Vanity Sink Front 34 ½ Specify R or L VSF1834 R or L VSF2434 VSF3034 VSF3634 Includes floor; shipped loose Toe kick included Optional Utensil Trays (UT and SUT) are aailable Not trimmable l l FB GD RTK G2 Vanity Cabinets

109 34 ½ Vanity Combination Drawer (2) 18 Deep Drawer-Door VCD DL VCD DL VCD DL VCD DL VCD DL Two deep drawers One drawer front l l l GD l RTK 21 Deep 18, 21 VCD DL VCD DL VCD DL VCD DL VCD DL Deep Door-Drawer VCD DR VCD DR VCD DR VCD DR VCD DR Deep Vanity Cabinets VCD DR VCD DR VCD DR VCD DR VCD DR ½ Vanity Combination Drawer Full False Front (4) 18 Deep VCDF Deep VCDF Four deep drawers Three drawer fronts l l l GD l RTK 18, Vanity Cabinets G3

110 34 ½ Vanity Combination Drawer (6) Drawer-Door-Drawer s VCD R or L VCD VCD VCD Two standard drawers Four deep drawers One drawer front l l l GD l RTK 21 VCD42 s Optional Door Storage Unit (SBDSU) is aailable 34 ½ Vanity Cabinets 21 VCD ½ Vanity Combination Drawer Full False Front (6) VCDF Four standard drawers Two deep drawers Three drawer fronts l l l GD l RTK ½ 21 VC18 Vanity Cabinet Full-Height Door VC R or L VC VC VC VC VC Full-height door No shelf l l l GD l RTK 34 ½ 21 VC24-VC36 G4 Vanity Cabinets

111 Vanity Base Single Door VB R or L VB R or L VB R or L VB R or L One standard drawer One adjustable shelf l l l GD l RTK 34 ½ ½ Vanity Base Double Door VB VB VB VB VB One adjustable shelf One standard drawer l l l GD l RTK Vanity Cabinets ½ Vanity Base Drawer VBD VBD VBD VBD VBD One standard drawer Two deep drawers l GD l RTK 21 4 ½ VKD Vanity Knee Drawer 18 deep VKD2418 VKD3018 s VKD deep VKD2421 VKD3021 s VKD3621 Unit is designed for use between two Vanity cabinets Drawer will be slab, except S.Deeron which will be fie-piece Not trimmable I End panels are 1/2 plywood with Natural Birch Viraguard interior and exterior I l l FB GD RTK 4 ½ s Two drawers side by side VKD36 Vanity Cabinets G5

112 Vanity Filler Pull-out Install decoratie hardware prior to attaching filler to pull-out unit Side View Filler VFP32130 VFP62130 Four adjustable sheles, one fixed shelf Includes six clear plastic trays Unit slides on full extension side-mount runners Recommended installation is between two cabinets Installation may also be made between a cabinet and a wall or a cabinet and an end panel with stile Filler is included, but unattached. Unit should be installed before remoing shipping brace and attaching filler A filler oerlay is recommended for full oerlay door styles; must be ordered separately No toe kick FB GD RTK Vanity Cabinets 34 ½ Vanity Base Top Mount Wastebasket Double VBWBT qt. capacity baskets Basket(s) are easily remoable for emptying or cleaning Basket(s) rest in a Natural Maple plywood frame Two standard drawers Frame slides on full extension glides l GD l RTK ½ Vanity Linen Cabinet 88 1/2 H 18 Deep VLC R or L VLC R or L VLC R or L 21 Deep Sheles shipped separately l l GD l RTK VLC R or L VLC R or L VLC R or L 18, ½ Vanity Linen Cabinet Three Drawer Specify R or L 18 Deep VLC R or L 3 VLC R or L 3 21 Deep VLC R or L 3 VLC R or L 3 Two adjustable sheles in upper section One standard drawer Two deep drawers l l l GD l RTK 18, 21 G6 Vanity Cabinets

113 30 Vanity Wall Cabinet VW Three adjustable 1/2 thick sheles l l GD RTK 4 5/8 Vanity Wall Boutique VWB2436 Two adjustable sheles l GD RTK Vanity Cabinets / Mirror Cabinet Surface Mount MC2430 Designed for surface mount installation Three adjustable 1/2 thick sheles Reersible (manufactured hinge left) Face frame has profiled outer edge l GD RTK 4 5 / 8 30 Tri View Mirror TV3030 PC TV3630 PC For surface mount or recess installation Three adjustable 1/2 thick sheles Hinges and touch latch come in Polished Chrome (PC) finish l GD RTK 4 5 / 8 30, 36 Rough-in Dimensions Cabinet Width Height Depth TV ¾ 3 ⅞ TV ¾ 3 ⅞ Vanity Cabinets G7

114 Vanity Cabinet Accessories VFC code width depth height Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth Vanity Cabinets Top View Vanity Filler VF3 34 VF6 34 VF3 88 VF6 88 VF3X3 34 3/4 thick solid wood No toe kick Remember to use fillers with full oerlay door styles when cabinets will be against a return wall, box, pilaster or column. Use fillers on all oerlays if there is case molding on a return wall. This will ensure proper clearance for drawers and roll-out tray access. FB VF VF3x3 83 5/8 Vanity Filler Oerlay VFOL3 34 VFOL6 34 VFOL3 88 VFOL6 88 Aailable in full oerlay door styles only Filler oerlay has routed door profile and is solid wood Filler ordered separately FB 1 ½ 1 ½ Vanity Fluted Filler VFF3 34 VFF6 34 3/4 thick solid wood FB 34 ½ 34 ½ 6 6 G8 Vanity Cabinet Accessories

115 Vanity Column 34 ½ ¾ 21 Deep VC Deep VC32434 Front is 3/4 solid wood Finished front and both sides Reersible, may be used on either right or left end I standard when option is selected I FB l ¾ 21, 34 ½ 1 ½ ¾ Vanity Fluted Column 21 Deep VFC Deep VFC32434 Fluted front is 3/4 solid wood Finished front and both sides Reersible, may be used on either right or left end I standard when option is selected I FB l Vanity Cabinets ¾ 21, 6 Vanity End Panel Wood Veneer WVEP x 34 1/2 x 13/16 Edgebanded one long edge Finished to match exterior both sides I panel is 11/16 thick I FB 34 ½ 21 Vanity End Panel w/stile Specify R or L VEP1 1/2 R or L 34 VEP3 R or L 34 Exterior finished to match, interior is Natural Birch Viraguard and machined to match a cabinet end panel Left shown l l 34 ½ 21 Vanity Cabinet Accessories G9

116 34 ½ 17 7/8, 20 7/8 Matching Vanity End Panel MVEP1834 R or L MVEP2134 R or L 3/4 thick panel with matching door edge profile on front edge only Inside of matching panel bottom rail will line up with inside bottom rail of door Left shown Not aailable in mitered door styles; use End Panel Mitered FB ¾ 3/16 Standard edge detail fits flush against 1/2 end panel and behind face frame When designing with Matching End Panels the reeal will differ from the cabinet door height reeal. Matching End Panels coer the entire side of the cabinet. See drawing for exact measurements Vanity Cabinets 34 ½ 17 7/8, 20 7/8 Furniture Matching Vanity End Panel FMVEP1834 R or L FMVEP2134 R or L 3/4 thick panel with matching door edge profile on front edge only Inside of matching panel bottom rail will line up with inside bottom rail of door For use with Furniture Plywood Ends (FB) flush ends Left shown Field installation only Not aailable in mitered door styles; use End Panel Mitered FB 34 ½ 17 7/8, 20 7/8 Matching Vanity End Panel Mitered M MVEP1834 M MVEP2134 3/4 thick panel with matching door edge profile on front edge only Inside of matching panel bottom rail will line up with inside bottom rail of door Aailable in mitered door styles only Reersible, may be used on either right or left end Field installation only Toe kick shipped unattached FB Will not fit flush against 1/2 end panel, a 3/16 shim is recommended 96 Toe Kick MTK8 1/8 thick hardboard, 4 1/2 high, laminated with matching Viraguard WMTK8 3/16 thick wood eneer, 4 1/2 high, to match Edges are unfinished Field installation only Note: Matching toe kick is not automatically supplied with cabinets. It must be ordered as a separate item Apply Quarter Round molding (QR8) at the base of Matching Toe Kicks or Wood Matching Toe Kicks (MTK8 or WMTK8) for a nice, finished look. FB G10 Vanity Cabinet Accessories

117 Vanity Bath Clearances Minimum Clearances A minimum of 2 from the edge of the bowl to a wall or similar obstruction Minimum 30 of clearance space in front of the fixture Vanity Cabinets 30 Minimum 30 of clearance space in front of the fixture. When using double bowls, allow 4 of space between the edge of each bowl. 16 of clearance on each side of center Desirable Clearances or more or more Vanity Cabinet Accessories G11

118 Notes Vanity Cabinets G12 Notes

119 Office Cabinets DDR code width depth Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Note: Standard office cabinet box depth is 21 or 24 unless stated otherwise. Add door thickness with bumpers for total depth. Standard base desk cabinet height is 29 unless stated otherwise. Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth GD -- Glass Doors RTK -- Recessed Toe Kick RTKP - Recessed Toe Kick Peninsula 29 Desk Door Cabinet Single Door Specify R or L 21 Deep DDO12 R or L DDO15 R or L DDO18 R or L DDO21 R or L Comfortable height for dressing table or writing surface One adjustable shelf l l l GD l RTK l RTKP 24 Deep 29 21, DDO1224 R or L DDO1524 R or L DDO1824 R or L DDO2124 R or L Desk Door Cabinet Double Door 21 Deep DDO24 BUTT 24 Deep DDO2424 BUTT Comfortable height for dressing table or writing surface One adjustable shelf l l l GD l RTK l RTKP Office Cabinets 21, 29 Desk Drawer Cabinet 21 Deep DDR12 DDR15 DDR18 DDR21 DDR24 Comfortable height for dressing table or writing surface Two standard drawers One deep drawer Deep drawer will not accept hanging file folders l l GD l RTK l RTKP 24 Deep 21, DDR1224 DDR1524 DDR1824 DDR2124 DDR2424 Office Cabinets H1

120 Desk Double File Drawer l 29 21, 21 Deep DDFD18 DDFD24 24 Deep DDFD1824 DDFD2424 Two deep drawers with side-mount fullextension runners 18 wide DDFDs are designed to be used as a standard or lateral file and can be adjusted to accept letter or legal file folders 24 wide DDFDs are designed to be used as a lateral file and can be adjusted to accept letter or legal file folders Hanging file hardware is included and attached to drawer box sides to support hanging file folders. Drawer box bottom does not support any weight. Hanging file folders not included GD l RTK l RTKP Desk Wastebasket l DWBT18 DWBT Deep DWBT18 FH 24 Deep DWBT1824 FH One 35 qt. capacity basket Grey basket(s) Basket(s) rest in a Natural Maple plywood frame Basket(s) are easily remoable for emptying or cleaning Door is attached to roll-out unit Frame slides on full extension glides Includes 3 1/2 deep bag storage tray at rear. Optional Wastebasket Lid (WBL35.G) aailable for 35 quart wastebasket GD l RTK l RTKP Office Cabinets 16 1/ /8 1 3/ ¾ 12 ¾ 3 3/ ¾ 12 ¾ Tray 1 9 3/8 1 3/8 9 3/8 22 1/8 DWBT DWBT / 2 DKD24-DKD Desk Knee Drawer Cabinet 21 Deep DKD24 DKD27 DKD30 DKD33 s DKD36 2D s Two drawers side by side 24 Deep DKD2424 DKD2724 DKD3024 DKD3324 s DKD3624 2D Unit is designed for use between two base, desk or tall cabinets When mounted at 29 height with a 1 1/2 countertop, unit proides a comfortable writing surface One end of DKD can be supported by optional Desk End Panel (DEP) Drawer will be slab, except S.Deeron which will be fie-piece Not trimmable I End panels are 1/2 plywood with Natural Birch Viraguard interior and exterior l FB l GD RTK RTKP 4 1 / 2 DKD36 2D Consider using a Cabinet Front Only (CFO) under a desk to coer up wires, outlets etc. This will decorate the area, plus gie easy access to cords. Especially useful if you are placing a CPU in a cabinet next to your knee space. H2 Office Cabinets

121 Office Accessories WDEP code depth height Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice -- All Plywood Construction Desk Filler 90 Top View DF3 DF6 DF3X3 3/4 thick solid wood No toe kick 24 ½ DF DF 3x3 Desk Filler Oerlay Office Cabinets 24 1/8 DFOL3 DFOL6 Aailable in full oerlay door styles only Filler oerlay has routed door profile and is solid wood Filler ordered separately 29 21, 4 1 / 2 Desk End Panel WDEP2129 WDEP2429 Wood eneer construction Wood eneer panel is 13/16 thick Unit designed to support one end of Desk Knee Drawer (DKD) Finished front and both sides I panel is 11/16 thick l 16 Office Accessories H3

122 / / 8 ¾ 3 / 16 Matching Desk End Panel Specify R or L MDEP21 R or L MDEP24 R or L 3/4 thick panel with matching door edge profile on front edge only Inside of matching panel bottom rail will line up with inside bottom rail of door Left shown Field installation only Slab door styles do not hae grooes and will not fit flush against 1/2 end panel. A 3/16 shim is recommended. Not aailable in mitered door styles; use End Panel Mitered Standard edge detail fits flush against 1/2 end panel and behind face frame When designing with Matching End Panels the reeal will differ from the cabinet door height reeal. Matching End Panels coer the entire side of the cabinet. See drawing for exact measurements Furniture Matching Desk End Panel / / 8 Specify R or L FMDEP21 R or L FMDEP24 R or L 3/4 thick panel with matching door edge profile on front edge only Inside of matching panel bottom rail will line up with inside bottom rail of door Left shown Field installation only For use with Furniture Plywood Ends (FB) flush ends Not aailable in mitered door styles; use End Panel Mitered Office Cabinets Will not fit flush against 1/2 end panel, a 3/16 shim is recommended Matching Desk End Panel Mitered / / 8 Will not fit flush against 1/2 end panel, a 3/16 shim is recommended M MDEP21 M MDEP24 3/4 thick panel with matching door edge profile on four sides Inside of matching panel bottom rail will line up with inside bottom rail of door Reersible, may be used on either right or left end Aailable in mitered door styles only Field installation only Toe kick shipped unattached Toe Kick 96 MTK8 1/8 thick hardboard, 4 1/2 high, laminated with matching Viraguard WMTK8 3/16 thick wood eneer, 4 1/2 high, to match Edges are unfinished Field installation only Note: Matching toe kick is not automatically supplied with cabinets. It must be ordered as a separate item Apply Quarter Round molding (QR8) at the base of Matching Toe Kicks or Wood Matching Toe Kicks (MTK8 or WMTK8) for a nice, finished look. H4 Office Accessories

123 Booksheles Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Note: Standard furniture cabinet box depth is 12 unless stated otherwise. Add door thickness and bumper for total depth. -- Plywood Ends -- All Plywood Construction - All Plywood Furniture Construction FB- - Furniture Plywood Ends -- Matching Interior -- Reduced Depth RTK -- Recessed Toe Kick FBS code width depth height Note: unless noted, all Furniture Cabinets are manufactured in 3/4 Furniture Plywood Ends with matching wood eneer or Viraguard interiors. Due to toe kicks shipping separately on 96 high units, 96 furniture cabinets will be manufactured with 1/2 plywood end panels so the ends can be skinned to hide the seam. Skins must be ordered separately. Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. Furniture Book Shelf Top / 2 Three Sheles 48 High FBS FBS FBS FBS Four Sheles 59 1/2 High FBS FBS FBS FBS Sheles shipped separately I standard when option is selected I FB l RTK Furniture Cabinets Furniture Book Shelf 84 H 84 FBS FBS FBS FBS Includes fie adjustable sheles Sheles shipped separately I standard when option is selected I FB l l RTK Booksheles I1

124 Furniture Book Shelf 90 H 90 FBS FBS FBS FBS Includes six adjustable sheles I standard when option is selected Sheles shipped separately I FB l l RTK Furniture Book Shelf 96 H FBS FBS FBS FBS /2 plywood ends with matching interiors Includes six adjustable sheles Sheles shipped separately Toe kick shipped unattached l l FB RTK 96 Furniture Base 84 H Furniture Cabinets / 2 Specify R or L FB R or L FB R or L FB R or L FB BUTT FB (Butt) FB FB FB Includes three adjustable sheles in open section Two adjustable sheles in lower base section Sheles shipped separately I standard when option is selected I FB l l RTK I2 Booksheles

125 Paneling WSK code width height Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- All Plywood Construction Wood Veneer Paneling I Standard Grain Panel Cross Grain Panel Engineered Wood Construction Code Width x Height x Thickness WPL x 34 1/2 x 3/8 u WPL x 34 1/2 x 3/8 u WPL x 48 x 3/8 WPL x 96 x 3/8 Plywood Construction Code Width x Height x Thickness WSK /4 x 30 x 3/16 WSK /4 x 34 1/2 x 3/16 WSK /4 x 34 1/2 x 3/16 WSK /4 x 48 x 3/16 u WSK x 48 x 3/16 WSK /4 x 84 x 3/16 WSK /4 x 84 x 3/16 WSK x 84 x 3/16 WSK /4 x 88 1/2 x 3/16 WSK /4 x 90 x 3/16 WSK /4 x 96 x 3/16 WSK /4 x 96 x 3/16 WSK x 96 x 3/16 u Cross grain panel for peninsula application Finished one side only Edges are unfinished with no edgebanding I is optional for WPL Remember to order a 3/16 skin (WSK) for the exposed ends of 93 & 96 high cabinets to conceal the seam between the loose toe kick and the cabinet. Remember, the grain on paneling normally runs along the length of the panel. Cross grain means grain goes with the short edge. Beaded Paneling 5/1 6 1/1 6 3 Code Width x Height x Thickness BEPL x 34 1/2 x 3/8 BEPL x 96 x 3/8 Plywood construction Grooes are 3 on center Material may need to be trimmed to ensure proper grooe spacing when butting panels together Panels Sheling Trays Paneling J1

126 Sheling BS code width depth Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. -- All Plywood Construction -- Matching Interior -- Reduced Depth ID- -- Increased Depth Shelf Kits l 24 Deep SK1224 SK1524 SK1824 SK2424 SK2724 SK3024 SK3324 SK3624 Four 3/4 Viraguard laminated sheles Edgebanded one long edge Sixteen shelf clips included Recommended for tall cabinets l l ID Glass Shelf Kits GSK GSK12 GSK15 GSK18 GSK21 GSK24 GSK27 u GSK30 u GSK33 u GSK36 Fits peninsula and standard wall cabinets Includes two 1/4 glass sheles polished edge all four sides and 12 glass shelf rests Glass sheles cannot be field installed in a WA 24 high; the opening is not large enough Tempered glass I Minimum Reduced Depth () is 9 I ID For Wall Angle n GSKWA24 n GSKWA27 For Peninsula Wall Angle GSKWA n GSKPWA For Easy Reach n GSKWZ24 Panels Sheling Trays GSKWZ u Cannot be used with W3030 BUTT, W3630 BUTT or any open cabinets 30 or wider. A center stile is needed for support. n Not aailable in Reduced Depth () J2 Sheling

127 Replacement Sheling Walls For 12 deep Wall WS912 WS1212 WS1512 WS1812 WS2112 WS2412 WS2712 WS3012 WS3312 WS3612 s WS3912 s WS4212 s WS4512 s WS4812 For Wall Refrigerator s WRS1824 s WRS2124 s WRS2424 s WRS3024 s WRS3324 s WRS3624 s WRS3924 For 12 deep Peninsula Wall PWS1212 PWS1812 PWS2412 PWS3012 PWS3612 s PWS4212 For Wall Angle WAS24 WAS27 For Peninsula Wall Angle PWAS24 For Wall Corner Angle WCAS1212 For Wall Easy Reach WEZRS21 WEZRS24 WEZRS2421 For Peninsula Wall Easy Reach WEZRS24 s Not aailable in Increased Depth (ID) For Wall Microwae MWCS2718 MWCS3018 MWCS2721 MWCS3021 l 3/4 interior Viraguard two sides l Edgebanded one long edge two edges I for peninsula Size fits interior of cabinet listed Includes one shelf See Hardware section of this book for shelf clips I Maximum Increased Depth (ID) for peninsula wall sheling is 15 l ID Replacement Sheling Base For 21 deep Base BS1221 BS1521 BS1821 BS2121 BS2421 BS2721 BS3021 BS3321 BS3621 For 24 deep Base BS1224 BS1524 BS1824 BS2124 BS2424 BS2724 BS3024 BS3324 BS3624 BS3924 BS4224 BS4824 For 24 deep Peninsula Base PBS1224 PBS1824 PBS2424 PBS2724 PBS3024 PBS3324 PBS3624 For Base End Corner BECS2424 For Base End Angle BEAS1224 For Easy Reach BEZRS33 BEZRS36 EZRS3633 For Lazy Susan Angle LSAS36 3/4 interior Viraguard two sides Edgebanded one long edge two edges for peninsula Size fits interior of cabinet listed Includes one shelf See Hardware section of this book for shelf clips l l l ID Panels Sheling Trays Sheling J3

128 Replacement Sheling Vanity For Tri-View TVS30 TVS36 For Vanity Mirror Angle VMAS12 For Vanity Wall Boutique 1/2 interior Viraguard two sides Edgebanded one long edge Size fits interior of cabinet listed Includes one shelf See Hardware section of this book for shelf clips l l ID u WSVWB24 u 3/4 interior Viraguard two sides Panels Sheling Trays J4 Sheling

129 Roll-out Trays Construction Options and Modifications Material dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. DROT code width depth option depth option depth option Roll-out Tray Field Installation Chart (Maximum) Cabinet #ROTs #DROTs Base 5 3 Base FH 7 4 Tall Desk 3 2 Vanity 5 3 VLC 88 ½ H 6 (Top) 6 (Top) 7 (Bottom) 4 (Bottom) Roll-out Trays Factory Installed i 1FWROT i 2FWROT i 3FWROT i 4FWROT i 5FWROT i 6FWROT 1ROT 2ROT 3ROT 4ROT 5ROT 6ROT i When full-width Roll-out Trays (ROT) are ordered for 30, 33 or 36 wide cabinets, the double doors will hae a mullion attached to the left door. Full width Roll-out Trays (ROT) are not aailable factory installed on Utility cabinets (U) wider than. 2 1/4 high tray has 1/2 thick solid wood sides and 3/16 Viraguard laminated plywood bottom 18, 21 and 24 depths only Sheles are eliminated when this option is selected Tray location is adjustable A maximum of two different Roll-out Tray (ROT) types can be factory installed in a single cabinet. Example: B30BUTT-1FWROT- 1DFWROT Full-width trays not aailable in 39, 42, 45 or 48 Trays are not eenly spaced Specify quantity Example: Installed U182484L-3ROT Installed B15L-3ROT Installed B36-3FWROT Panels Sheling Trays Roll-out Trays J5

130 Roll-out Trays Field Installation ROT ROT ROT ROT ROT ROT ROT ROT ROT ROT ROT ROT /4 high tray has 1/2 thick solid wood sides and 3/16 Viraguard laminated plywood bottom 18, 21 and 24 depths only Tray location is adjustable Mounting hardware and runners included Example: For U order ROT18 24 For B15L order ROT15 24 For VB15L order ROT15 21 Deep Roll-out Trays Factory Installed i 1DFWROT i 2DFWROT i 3DFWROT i 4DFWROT i 5DFWROT i 6DFWROT 1DROT 2DROT 3DROT 4DROT 5DROT 6DROT i When full-width Roll-out Trays (ROT) are ordered for 30, 33 or 36 wide cabinets, the double doors will hae a mullion attached to the left door. Full width Roll-out Trays (ROT) are not aailable factory installed on Utility cabinets (U) wider than. 4 high tray has 1/2 thick solid wood sides and 3/16 Viraguard laminated plywood bottom 18, 21 and 24 depths only A maximum of two different Roll-out Tray (ROT) types can be factory installed in a single cabinet. Example: B30BUTT-1FWROT- 1DFWROT Full-width trays not aailable in 39, 42, 45 or 48 Sheles are eliminated when this option is selected Specify quantity Tray location is adjustable Trays are installed from bottom to top and will not be eenly spaced when multiples are ordered Example: Installed U182484L-3DROT Installed B15L-2DROT Installed B36-2DFWROT Deep Roll-out Trays Field Installation Panels Sheling Trays DROT DROT DROT DROT DROT DROT DROT DROT DROT DROT DROT DROT high tray has 1/2 thick solid wood sides and 3/16 Viraguard laminated plywood bottom 18, 21 and 24 depths only Tray location is adjustable Mounting hardware and runners included Example: For U order DROT18 24 For B15L order DROT15 24 For VB1518R order DROT15 18 For VB15L order DROT15 21 J6 Roll-out Trays

131 Base Pots and Pans Organizer Roll-out Field Installation ROT30 BPPSO ROT36 BPPSO 4 high Roll-out Tray with integrated shelf system Roll-out sides, back and sheles are 1/2 wood eneer plywood Mounting hardware and runners included depth only Field installation only Roll-out Tray Diided Kit Field Installation 10 ROTDK ROTDK # compartments Tray is 2 1/4 high at front and 10 high at back 24 depth only Plywood doweled construction Example: For B15L order ROTDK For B15R-18 order ROTDK Panels Sheling Trays Roll-out Trays J7

132 Notes Panels Sheling Trays J8 Notes

133 Glass Inserts 1 BIS 2 quantity code height code Construction Options and Modifications Classic glass is simple, clean and timeless. Layered glass combines the durability of tempered glass with the material sandwiched between the glass layers for easy cleaning Aailable in most door styles, in sizes from 12 wide and up to 54 high Glass inserts are ordered indiidually. Place quantity before order code. See examples for indiidual items Material dimensions may ary slightly based on lumber industry standards Decoratie Doors and Inserts See Construction Options section for specific information on each glass type Specifications subject to change without notice Antiquity Insert H 1ATQ1 2ATQ1 3ATQ1 4ATQ H 1ATQ2 2ATQ2 3ATQ2 4ATQ2 Clear film laminated between pieces of obscured clear glass with droplet (seeded) impressions throughout Aailable in all door styles Example: W1830R-1ATQ1 Bistro Insert H 1BIS1 2BIS1 3BIS1 4BIS H 1BIS2 2BIS2 3BIS2 4BIS2 Clear tempered glass Example: W1830R-1BIS1 Prepared for Glass 1DRS PREP 2DRS PREP 3DRS PREP 4DRS PREP Aailable in all door styles in heights up to 42 for customer supplied glass Specify prep for glass Glass clips included 9 wide doors cannot be prep for glass or inserts Example: W1830R-1DRS PREP Glass Inserts K1

134 Decoratie Doors and Inserts Mullion Doors 1 SDATQ 2 code code height code Construction Options and Modifications Mullion door design combine the beauty of actual wood mullion diiders and clear or layered tempered glass. Antiquity and Bistro glass inserts offer a range of iews into the cabinet interior, so items behind the glass can be fully exposed or slightly obscured Aailable in most door styles, in sizes from 12 wide and up to 42 high. Consult Decoratie Doors and Inserts Aailability chart for specific details Mullion Doors are ordered indiidually. Place quantity before order code. See examples for indiidual items Material dimensions may ary slightly based on lumber industry standards See Construction Options section for specific information on each glass type Specifications subject to change without notice Showcase Mullion standard inside profile Bistro Glass Insert H 1SD1 2SD1 3SD1 4SD H 1SD2 2SD2 3SD2 4SD2 Antiquity Glass Insert H 1SDATQ1 2SDATQ1 3SDATQ1 4SDATQ H 1SDATQ2 2SDATQ2 3SDATQ2 4SDATQ2 Standard Mullion Profile: The outside profile of a Mullion door will match the profile of the selected door style. The inside profile and mullion profile will always be the same, as pictured. Showcase door has 2 x 2 lites in each corner and is always 3 lites wide by 3 lites high Center section aries in width and height Aailable in all door styles Example: W1830L-1SD1; W1842L-1SDATQ2 Cabinet Nominal Height Width BUTT 27(Butt) 30BUTT 33BUTT 36BUTT WA24 WCA12 Dark gray shaded sizes feature annealed glass s tempered glass K2 Mullion Doors

135 outside profile standard inside profile standard mullion profile Lite Configurations A B C Traditional Mullion Bistro Glass Insert H 1MD1 2MD1 3MD1 4MD H 1MD2 2MD2 3MD2 4MD2 Antiquity Glass Insert H 1MDATQ1 2MDATQ1 3MDATQ1 4MDATQ H 1MDATQ2 2MDATQ2 3MDATQ2 4MDATQ2 Standard Mullion Profile: The outside profile of a Mullion door will match the profile of the selected door style. The inside profile and mullion profile will always be the same, as pictured. To determine the Mullion Door Lite configuration for your selected cabinet, refer to the chart Configuration G, J and K will be supplied with annealed glass s. tempered glass Aailable in all door styles Example: W1830-1MD1; W1842-1MDATQ2 Be sure your customer is aware of the mullion configuration when working with sizes requiring patterns A,D,G, J and K. Decoratie Doors and Inserts D E F G H I J K L Cabinet Width Nominal Height L L G G D D A A A 15 J J H H E E E B B B 18 J J H H E E E B B B 21 K K I I F F C C C 24 K I I F F F C C C 24BUTT L L G G D D D A A A 27(butt) J J H H H E E E B B B 30BUTT H H E E E B B B 33BUTT J J H H H E E E B B B 36BUTT J J H H H E E E B B B 39 K K I I F F C C C 42 I I I F F C C C 45 I F F C C C 48 J J H I F F C C C WA24/27 J J H H E E B B B WEZR24 D D A A A WEZR36 D D A A WCA12 J H H H E E E B B B Mullion doors are shipped in the following configurations. No modifications are aailable. Mullion Doors K3

136 Decoratie Doors and Inserts Notes K4 Notes

137 Supports and Valances V 72 T code length style Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Valance backs are not finished. Material thickness dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. C --- Cherry M- -- Maple 3 11 ¼ 11 ¼ 9 3/16 CTS Countertop Support CTS Solid wood For use when extra support for sheles or oerhanging countertop is required C M Decoratie Enhancements 1 1 / / / 1 / / / 2 Valance Crown V30 CR V36 CR V42 CR V48 CR V60 CR V72 CR V84 CR V96 CR 3/4 thick solid wood Can be trimmed in field 1 1/2 each end C M 5 1 / / 2 3 / 4 Valance Traditional V36 T V48 T V72 T V84 T V96 T 3/4 thick solid wood Trimmable in field Can be used as furniture alance C M 5 1 / / / 2 3 / 4 4 Valance Furniture V36 F V48 F V60 F V72 F V84 F V96 F 3/4 thick solid wood Can be trimmed in field 1 1/2 each end C M Note: Heay, dark lines indicate finished surfaces. Supports and Valances L1

138 5 1 / / 2 3 / / 32 Valance Scalloped 5 1/2 high V36 S V48 S V60 S V72 S V84 S V96 S 3/4 thick solid wood Trimmable in field C M Decoratie Enhancements 5 1 / / / 2 3 / 4 3 Valance Shaker 5 1/2 high V30 SH V36 SH V42 SH V48 SH V60 SH V72 SH V84 SH V96 SH 3/4 thick solid wood C M 5 1 / 2 3 / 4 Valance Contemporary 5 1/2 high V36 C V72 C V96 C 3/4 thick solid wood Trimmable in field C M 5 1 / / / / 4 Valance Raised Panel V30 RP V36 RP V42 RP V48 RP V54 RP V60 RP 3/4 thick solid wood Not trimmable C M 5 1 / 2 3 / 4 Valance Straight V48 ST V72 ST V84 ST 3/4 thick solid wood Trimmable in field C M 5 1 / 2 L2 Supports and Valances Note: Heay, dark lines indicate finished surfaces.

139 Molding SCM 8 code length Construction Options and Modifications (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material thickness dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. C --- Cherry M- -- Maple 18/32 17/ ¾ 1 13/ /32 4 5/32 2 5/8 3 / 4 Angle Crown Molding ACM8 Solid wood The mounting cleat is finished but is not a matching wood species to the face The mounting cleat is not intended to be exposed after installation C M Decoratie Enhancements 8 9/ /16 41 Angle Crown Molding Face-Mount ACM8 FM Solid wood C M 2 5/8 2 ¾ / 8 Soffit Crown Molding SCM8 Solid wood C M 1 1 / 8 Remember to account for miter cuts and returns when choosing the amount of molding needed for a job / 16 Crown Molding CM8 NG Solid wood C M 1 15 / 16 8 Note: Heay, dark lines indicate finished surfaces. Molding L3

140 2 7 / 16 Classic Crown Molding CCM8 NG Solid wood C M 4 1 / 8 3 / / 16 8 Use caution when applying Classic Crown Molding (CCM8), Crown Molding (CM8), etc., when stair stepping wall cabinets in full oerlay door styles otherwise the doors may hit the molding while opening. Decoratie Enhancements 2 13/ Large Crown Molding LCM8 NG Solid wood C M 1 27 / 32 Small Coe Molding SCVM8 NG Solid wood C M / 2 Large Coe Molding LCVM8 NG Solid wood C M 2 5 / ½ ¾ Traditional Light Rail TLR8 Solid wood Grooe accepts LED tape lighting C M 2 ¼ 8 L4 Molding Note: Heay, dark lines indicate finished surfaces.

141 1 3 / 8 5/ 8 Inset Light Rail ILR8 Solid wood Allows application of 3/4 inserts C M 1 13 / 16 3/ / 32 1/ 4 8 Batten Molding BM8 Solid wood C M Decoratie Enhancements 1 / 4 Narrow Batten Molding NBM8 Solid wood C M 3 / / 4 9 / 16 1 / 2 Dentil Edging DE8 Solid wood C M 3 / / 4 Inside Corner Molding ICM8 Solid wood C M 3 / 4 8 Note: Heay, dark lines indicate finished surfaces. Molding L5

142 49/ 64 1 / 4 1 / 2 Mirror Molding MM6 Solid wood C M 1 1 / 2 6 Decoratie Enhancements 3 / 4 1 / 2 8 Ogee Edging OGE8 Solid wood C M 1 / 4 5 / 8 5 / 8 Angled Outside Corner Molding AOSC8 Solid wood C M / / 4 Large Outside Corner Molding LOSC8 Solid wood C M / 16 1 / 4 Outside Corner Molding OSC8 Solid wood C M 13 / 16 8 L6 Molding Note: Heay, dark lines indicate finished surfaces.

143 3 / 4 3 / 16 Mission Outside Corner MOSC8 Solid wood C M 3 / / / 16 8 Quarter Round Molding QR8 Solid wood Apply Quarter Round molding (QR8) at the base of Matching Toe Kicks or Wood Matching Toe Kicks (MTK8 or WMTK8) for a nice, finished look. C M Decoratie Enhancements 3 / 8 Rope Molding RM8 Solid wood C M 3 / 4 Applying Rope Molding (RM8) or Dentil Edging (DE8) to the inlay of Classic Crown Molding (CCM8) before making cuts will enable you to condense two cuts into one / 32 Large Rope Molding LRM8 Solid wood Apply with small brad C M 1 5 / 16 8 ½ Triple Bead Edging TBE8 Solid wood C M ¾ 8 Note: Heay, dark lines indicate finished surfaces. Molding L7

144 1/ 2 Single Bead Edging SBE8 Solid wood C M 3 / 4 8 Decoratie Enhancements ¾ ¼ 8 Scribe Molding SM8 Solid wood Let your customers know if they hae left-oer pieces of Scribe Molding (SM8) to consider using them to finish the ends of exposed matching toe kick. C M ½ Shoe Molding SHO8 Solid wood C M 5/ / 4 7 / 16 Angled Wood Edge AWE8 Solid wood C M 1 9 / / / 32 Traditional Wood Edge TWE8 Solid wood C M 1 9 / 16 8 When using wood edge molding to trim a countertop, be sure to seal the back edge of the molding prior to installing the edge to the top. This will help preent moisture from entering the molding and damaging it. L8 Molding Note: Heay, dark lines indicate finished surfaces.

145 4 1 / 4 Ogee Pilaster OGP8 Solid wood C M 3 / / Triple Bead Molding TBM8 Solid wood C M Decoratie Enhancements 9 / 16 Chair Rail CR8 Solid wood Designed to oerlay LM8 C M 1 1 / / / 32 8 Solid Stock S3S1 S3S3 S3S6 Solid wood Use solid stock material as finished nailing strip for molding applications C M 1 / 4 3 / 4 9 / 16 Library Molding LM8 Solid wood C M 2 9 / / / 4 Note: Heay, dark lines indicate finished surfaces. Molding L9

146 ¾ 1 ½ Fluted Post Molding PMF8 Solid wood Use with End Block Capital (EDBL) and End Spindle Capital (EDS) for a customizable decoratie solution C M 8 Decoratie Enhancements ¾ 1 ½ 8 Plain Post Molding PMP8 Solid wood Use with End Block Capital (EDBL) and End Spindle Capital (EDS) for a customizable decoratie solution C M ¾ 1 ½ Reeded Post Molding PMR8 Solid wood Use with End Block Capital (EDBL) and End Spindle Capital (EDS) for a customizable decoratie solution C M 8 2½ 1¼ End Block Capital EDBL Solid wood Use with Post Molding (PMF, PMP, PMR) for a customizable decoratie solution C M 5 ¾ 2½ 21/1 6 1¾ 1¼ 11/8 15/16 End Spindle Capital EDS Solid wood Use with Post Molding (PMF, PMP, PMR) for a customizable decoratie solution C M 3 L10 Molding Note: Heay, dark lines indicate finished surfaces.

147 Molding Accents Construction Options and Modifications C --- Cherry M- -- Maple CBE 8 code length (Blank) Not aailable --- Included as standard l --- Aailable with an upcharge I --- Aailable with exceptions Material thickness dimensions may ary slightly based on lumber industry standards. Specifications subject to change without notice. 1/ Acanthus Insert ASI8 Solid wood Embossed design Apply with small brad C M Decoratie Enhancements 3 / 4 Center Beaded Insert CBE8 Solid wood Embossed design Apply with small brad C M 3 / / 16 3 / 4 Egg and Dart Edge EGE8 Solid wood Cared Apply with small brad C M / 4 Iy Insert IVI8 Solid wood Embossed design Apply with small brad C M 11 / 32 8 Note: Heay, dark lines indicate finished surfaces. Molding Accents L11

148 5 1 / / 16 Acanthus Capital ASC Solid wood Cared Apply with small brad C M 4 1 / 2 Decoratie Enhancements 2 7 / / 16 Tall Acanthus Capital TASC Solid wood Cared Apply with small brad C M 3 1 / 2 Small Grape Ornament SGO Solid wood Cared Apply with small brad C M 2 5 / 16 5 / 8 ¾ Rosette R33 3 x 3 x 3/4 R44 4 x 4 x 3/4 Solid wood C M 3, 4 Oal Rosette OVR Wood eneer Embossed design C M 4 3 / / 8 3 / 16 L12 Molding Accents Note: Heay, dark lines indicate finished surfaces.

149 4 1 / 2 Acanthus Onlay ASPO Solid wood Cared Apply with small brad C M 20 5 / / 2 5 / 8 Grape Onlay GRPO Solid wood Cared Apply with small brad C M Decoratie Enhancements 9" 6 1 / / 4 AC58 Acanthus Corbel AC58 AC313 Solid wood C M 9 3 / / 8 13" AC313 CVC69 5 ¾ 5 ½ CVC212 8 ¾ 2 ¾ Coe Corbel CVC69 CVC212 Solid wood C M 9 111/16 4 ¾ 111/ / / / 4 GC58 Grape Corbel GC58 GC313 Solid wood C M 9 3 / / / 4 GC313 Note: Heay, dark lines indicate finished surfaces. Molding Accents L13

150 9 6 1 / / 4 RC58 Rosette Corbel RC58 RC514 Solid wood C M 2 1 / / / 2 RC514 Decoratie Enhancements 7 ¾ 2 ¾ square 34 ¾ Classic Leg CL334 Solid wood Decoratie feet, casters or legs should support the cabinet by way of the end panels, not the cabinet floor Trimmable C M 7 ¾ 2 ¾ square 34 ¾ Fluted Leg FL334 Solid wood Decoratie feet, casters or legs should support the cabinet by way of the end panels, not the cabinet floor Trimmable C M 6 4 Tapered Leg TPL Solid wood Decoratie feet, casters or legs should support the cabinet by way of the end panels, not the cabinet floor Trimmable C M 2 ½ 1 ¾ 1 ¾ 2 ½ /8 French Leg FRL Solid wood Decoratie feet, casters or legs should support the cabinet by way of the end panels, not the cabinet floor Trimmable C M 3 3/16 2 ¼ 2 7/16 L14 Molding Accents Note: Heay, dark lines indicate finished surfaces.

151 7 ½ 2½ square Decoratie Posts Classic CP234 Solid wood Trimmable C M 34½ Fluted FP234 Tapered TPL34 5 CP FP TPL 30 3 square Plain Square Posts PSP3X3 30 Solid wood C M Decoratie Enhancements Note: Heay, dark lines indicate finished surfaces. Molding Accents L15

152 Decoratie Hardware 7017 MN Construction Options and Modifications Color ariation may exist between decoratie hardware designs that share same finish color name. code metal style Decoratie Enhancements ¼ 1 3/16 5 7/8 13/16 Satin Chrome 5 Center Pull Matte Nickel Knob 1 3/ /16 ½ 21/32 1 3/16 Medium Football Knob Oil Rubbed Bronze Also see companion ¼ 13/32 7/8 Oil Rubbed Bronze Pull 17/32 5 9/32 9/ Also see companion /32 29/32 5 1/32 L16 Decoratie Hardware

153 7/16, 7/16, ½, 21/32 Satin Nickel Tapered Bow Pull 3 5/32, 4 15/32, 6 1/32, 11 5/ /2 center /32 center /32 center /16 center 7/8, 1 3/32, 15/32, 13/8 5/8, 7/8, 29/32, 1 1/16 2 ½, 3 25/32, 5 1/32, 8 13/16 27/32 7/8 1 ½ 13/16 Tailored Knob 7017 MN Matte Nickel Decoratie Enhancements 1 ¼ Antique Knob 1 3/ Antique pewter and copper 1 11/16 13/16 Antique Pull 19/32 4 3/ /32 center Antique pewter and copper 15/32 25/ / Trunk Pull 7033 AP Antique Pewter Suitcase type with faux screws 1 5/32 29/ /32 Decoratie Hardware L17

154 Aged Bronze Knob 1 3/ Distressed aged bronze 1 5/16 5/8 5/8 Decoratie Enhancements 1 5 1/8 1 ¼ 1 Aged Bronze Pull 7035 Distressed aged bronze 4 ½ 4 3/16 Tailored Pull 7040 MN Matte Nickel 1 3/ /32 Olie Leaf Pull 21/ BZ Bronze 3 center 5 ¼ 15/16 25/32 3 L18 Decoratie Hardware

155 Olie Leaf Knob 1 9/ BZ Bronze 1 3/32 25/32 23/32 19/32 1 7/32 23/32 4 7/16 3 Venetian Bronze Victorian Leaf Pull center Decoratie Enhancements Venetian Bronze Rustic Knob 1 ½ /32 25/32 21/32 Bar Pull 4 17/ SS Stainless Steel 2 17/32 center 7086 SS Stainless Steel 6 5/16 center 1 3/8 29/ /32 Crescent Knob 1 1/ BB Brushed Bronze 1 9/16 1 3/16 ¾ Decoratie Hardware L19

156 Crescent Pull 4 ¼ 7127 BB Brushed Bronze 3 25/32 center 1 ¼ ¾ 3 25/32 Decoratie Enhancements 1 ¼ 1 1/8 ¾ Baluster Knob 7131 SN Satin Nickel ¾ Baluster Pull 4 5/ SN Satin Nickel 3 25/32 center 15/16 7/8 3 25/32 Heritage Knob 1 ¼ 7137 AB Ancient Bronze 1 5/16 1 7/8 Heritage Pull AB Ancient Bronze 1 7/16 7/8 4 L20 Decoratie Hardware

157 1 ¼ Sail Knob SN Satin Nickel 15/16 ¾ 3/ /16 11/ /32 Sail Pull 7140 SN Satin Nickel 3 25/32 center Decoratie Enhancements Century Knob 1 3/ SN Satin Nickel 15/16 5/8 7/16 Century Cup Pull 1 3/ SN Satin Nickel 4 ¾ 1 1/8 3 25/32 Heirloom Knob 1 3/ STB Statuary Bronze 1 ¼ 5/8 13/16 Decoratie Hardware L21

158 5/8 Heirloom Pull 7147 STB Statuary Bronze 3 25/32 center 4 5/8 1 1/4 9/ /32 Decoratie Enhancements 1 ½ 1 ¼ 25/32 Trunk Knob 7161 AP Antique Pewter 15/16 L22 Decoratie Hardware

159 Hardware Construction Options and Modifications Specifications subject to change without notice. PSCDR 24 code depth Sidemount Drawer Runners PDR18 PDR21 PDR24 50 lb. capacity Almond Used for Roll-out Trays (ROT) Packaged and sold as a pair ROT Mounting Block Kit ROTK R Includes mounting blocks, drawer glide mounting sleees and fasteners Replacement Parts Full Extension Drawer Runner PFDR12 PFDR15 PFDR18 PFDR21 PFDR24 75 lb. capacity Full extension runner, pulls out past the face frame Packaged and sold as a pair Used for: DDFD Desk Double File Drawer Hardware M1

160 Soft-Close Drawer Runners PSCDR12 PSCDR15 PSCDR18 PSCDR21 PSCDR24 75 lb. capacity Fully concealed Full extension runner, pulls out past the face frame Ball bearing operation Integrated mechanism closes drawers softly and quietly Packaged and sold as a pair Must order drawer clips separately Soft-Close Drawer Runners Two Drawer Cabinets Replacement Parts PSCDR21 2 PSCDR24 2 Soft-Close Base Pantry Pull-Out Runners 75 lb. capacity Fully concealed Full extension runner, pulls out past the face frame Ball bearing operation Integrated mechanism closes drawers softly and quietly Used for: BPPS_ 2 Base Pot and Pan Storage Two Drawer BDDC Base Deep Drawer Combination Packaged and sold as a pair Must order drawer clips separately PSCBPPDR24 75 lb. capacity Fully concealed Full extension runner, pulls out past the face frame Ball bearing operation Integrated mechanism closes drawers softly and quietly Used for: BPP Base Pantry Pull-out Packaged and sold as a pair Must order drawer clips separately Soft-Close Vanity Base Pull-Out Runners PSCVBPDR21 75 lb. capacity Fully concealed Full extension runner, pulls out past the face frame Ball bearing operation Integrated mechanism closes drawers softly and quietly Packaged and sold as a pair Must order drawer clips separately M2 Hardware

161 Soft-Close Drawer Clips BOX SCDC Box of ten, fie left and fie right PSCDC Packaged and sold as a pair PSCDC S Packaged and sold as a pair Used for: BPP Base Pantry Pull-out VSB36.2 Vanity Sink Base Shelf Clips BOX SC12 BOX SC34 For 1/2 thick sheles For 3/4 thick sheles Clear plastic locking clip Ten per box Front Shelf Clips BOX SCF Clear plastic locking clip Plastic front edge restraint Ten per box (Fie left and fie right) Replacement Parts Glass Shelf Rests BOX GSR Polished chrome finish with slip resistant pad Twele per box Hardware M3

162 Furniture Shelf Rests BOX FSR Satin chrome For use in any cabinet Ten per box Hardware Screws BOX HS Specify door or drawer and hardware type Example: BOX HSDOOR for 205 hardware Ten per box Replacement Parts Installation Screws BOX IS Each pack includes 4 mounting screws and 2 cabinet-to-cabinet screws Mounting screws are 2 3/4 long Cabinet-to-cabinet screws are 2 1/2 long Ten packs per box Permaset Bumpers BOX PSDB Opaque Eersoft rubber door bumpers Ten per box M4 Hardware

163 False Front Clips BOX SFFC Mounting hardware included Ten per box Glass Insert Retainer Strip MDRS Holds decoratie glass in a door frame Used with the following decoratie glass inserts: Bistro (BIS) Specify length needed, in feet 1/ 2 1 / 8 Soft-Close Hinges Full Oerlay PHSC1516 Six-way adjustable hinge Nickel plated finish Integrated mechanism closes doors softly and quietly On/off switch adjusts closing speed for light and heay doors Packaged and sold as a pair Replacement Parts Soft-Close Hinges 1/2 Oerlay PHSC12 Six-way adjustable hinge Nickel plated finish Integrated mechanism closes doors softly and quietly On/off switch adjusts closing speed for light and heay doors Packaged and sold as a pair Hardware M5

164 Soft-Close Hinges Face Mount PHSC FM Four-way adjustable hinge Nickel plated finish Integrated mechanism closes doors softly and quietly On/off switch adjusts closing speed for light and heay doors Used for Oen Cabinets (OC) with 3 frame stiles in the door section Packaged and sold as a pair Hinges Partial Or Full Oerlay Easy Reach PH170EZ Nickel plated finish Packaged and sold as a pair Used for all Easy Reach (EZR) cabinets Replacement Parts Hinges Bifold PHBF Nickel plated finish Packaged and sold as a pair M6 Hardware

165 Touch-Up Construction Options and Modifications Specifications subject to change without notice. QST code PC finish Aerosol Can Clear Finishes ACNA Natural Color Finishes ACCV Canas ACVG Canas w/cocoa Glaze ACWH Doe White ACGN Ginger, Ginger w/sable Glaze ACPC Peppercorn ACPR Praline ACSAD Saddle Paint QPCV Canas QPWH Doe White Includes paint, accent and topcoat QPVG Canas w/cocoa Glaze Matches base color only 13 oz. can Includes one qt. of paint Replacement Parts Quart Stain Kit Quart Topcoat QSTNA Natural top coat Includes stain QSTC19 Ginger QSTPC Peppercorn QSTPR Praline QSTSAD Saddle Includes stain and topcoat QSTGN Ginger w/sable Glaze Sold in complete kits only; indiidual components not aailable Includes application instructions Touch-Up M7

166 Touch-Up Kit TUKCV TUKVG TUKWH TUKGN TUKNA TUKPC TUKPR TUKSAD Canas Canas w/cocoa Glaze Doe White Ginger, Ginger w/sable Glaze Natural Peppercorn Praline Saddle Kit includes: Fill Stick (FS) and Touch-Up Pen (TP) Touch-Up Pen TPCV TPVG TPWH TPGN TPNA TPPC TPPR TPSAD Canas Canas w/cocoa Glaze Doe White Ginger, Ginger w/sable Glaze Natural Peppercorn Praline Saddle Replacement Parts Fill Stick FSCV Canas FSVG Canas w/cocoa Glaze FSWH Doe White FSGN Ginger, Ginger w/sable Glaze FSNA Natural FSPC Peppercorn FSPR Praline FSSAD Saddle M8 Touch-Up

167 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code B W W1206 B12_ FH B W W1506 B15_ FH B W W1806 B18_ FH B W W2106 B21_ FH B W W2406 B24_ FH B24_BUTT FH 2 B B2430 B24BUTT 2 B B W W2406 B W W2706 B27_ FH B30_BUTT FH B30BUTT W W3006 B33_BUTT FH 2 B B3330 B33BUTT 2 B B W W3306 B36 2T W W3606 B36 4T W W3606 B36_BUTT FH B36 2D W W1806 B36BUTT W W3606 B W W4006 B39 2T W W3906 B39 4T W W3906 B39_ FH B39 2D W W3906 B W W2106 B42 2T W W2106 B42 4T W W2106 B42_ FH B W W2406 B48 2T W W2406 B48 4T W W2406 B48_ FH B BBC W W1206 BBC W W1506 BBC W W1806 BBC W W2106 BBC W W2406 BBMC W W2408 BBMC W W2708 BBMC W W3008 BBMC W W3308 BD12 3 W W W W1211 BD W W W W1215 BD15 3 W W W W1511 BD W W W W1515 BD18 3 W W W W1811 BD W W W W1815 BD21 3 W W W W2111 BD W W W W2106 BD24 3 W W W W2411 BD W W W W2415 BD W W W W2715 BD W W W W3015 BDDC30 2 TT 2 W W3016 BDDC36 2 TT 2 W W3616 BEA12 1 A A2430 BEC BMC W W2415 BMC W W2715 BMC W W3015 BMCE27_34 1 W W2710 BMCE30_34 1 W W3010 BPP NH NH BPP NH NH BPPS W W3016 BPPS W W3616 BPPS W W W W3615 BSDC6 5 W W0606 BTP NH NH BTP NH NH BWBT NH NH 1 W W1506 BWBT15 FH BWBT NH NH 1 W W1806 BWBT21 2 FH NH NH DDFD18 2 W W1812 DDFD24 2 W W2412 DDO W W1206 DDO W W1506 DDO W W1806 DDO W W2106 DDO24BUTT 2 B B W W2406 DDR12 2 W W W W1213 DDR15 2 W W W W1513 DDR18 2 W W W W1813 DDR21 1 W W W W2106 DDR24 2 W W W W2413 DKD24 1 W W2404 DKD27 1 W W2704 DKD30 1 W W3004 DKD33 1 W W3304 DKD36 2D 2 W W1804 DSB30BUTT DSB36BUTT DWBT18 FH NH NH Door & Drawer Fronts - Part Index M9 Replacement Parts

168 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code Replacement Parts EZR33 1 EZR33 1 EZR33 EZR EZR EZR3336 EZR36 1 EZR36 1 EZR36 EZR EZR EZR3633 FB FB FB FB24BUTT 2 B B2430 FB FB FB FB LSA36 1 A A2430 MC MC MC2430 MSP36_ M M MSP36_ M M MSP36_ M M MSP36_ M M3656 MSP36_ M M OC27_84D W W2708 OC27_84DE OC27_84S 2 B B OC27_84U W W W W2711 OC27_87D W W2708 OC27_87DE OC27_87S OC27_87U W W W W2711 OC27_90D W W2708 OC27_90DE OC27_90S OC27_90U W W W W2711 OC27_93D W W2708 OC27_93DE OC27_93S OC27_93U W W W W2711 OC27_96D W W2708 OC27_96DE OC27_96S OC27_96U W W W W2711 OC30_84BUTTU W W W W3011 OC30_84D W W3008 OC30_84DE OC30_84S OC30_87BUTTU W W W W3011 OC30_87D W W3008 OC30_87DE OC30_87S OC30_90BUTTU W W W W3011 OC30_90D W W3008 OC30_90DE OC30_90S OC30_93BUTTU W W W W3011 OC30_93D W W3008 OC30_93DE OC30_93S OC30_96BUTTU W W W W3011 OC30_96D W W3008 OC30_96DE OC30_96S OC33_84BUTTD 1 W B B W3308 OC33_84BUTTDE 2 B B3318 OC33_84BUTTS 2 B B B B3324 OC33_84BUTTU 2 B B W W W W3311 OC33_87BUTTD 2 B B W W3308 OC33_87BUTTDE 2 B B3322 OC33_87BUTTS 2 B B B B3324 OC33_87BUTTU 2 B B W W W W3311 OC33_90BUTTD 1 W B W3308 OC33_90BUTTDE 2 B B3324 OC33_90BUTTS 4 B B3324 OC33_90BUTTU 2 B B W W W W3311 OC33_93BUTTD 1 W B B W3308 OC33_93BUTTDE 2 B B3327 OC33_93BUTTS 2 B B B B3324 OC33_93BUTTU 2 B B W W W W3311 OC33_96BUTTD 2 B B W W3308 OC33_96BUTTDE 2 B B3330 OC33_96BUTTS 2 B B B B3324 OC33_96BUTTU 2 B B W W W W3311 OC39_84S OC39_87S OC39_90S OC39_93S M10 Door & Drawer Fronts - Part Index

169 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code OC39_96S PB W W1206 PB12 FH PB W W1806 PB18 FH PB W W2406 PB24 FH PB24BUTT 4 B B W W2406 PB24BUTT FH 4 B B2430 PB30BUTT W W3006 PB30BUTT FH PB36BUTT W W3606 PB36BUTT FH PBBC W W2706 PW PW PW PW PW PW PW PW PW PW2418BUTT 4 B B2418 PW PW2424BUTT 4 B B2424 PW PW2430BUTT 4 B B2430 PW PW2433BUTT 4 B B2432 PW PW2436BUTT 4 B B2436 PW PW2439BUTT 4 B B2439 PW PW2442BUTT 4 B B2442 PW PW PW PW PW PW PW PW PW PW PW PW PW PW PW PW PW PW PW PW PW PWA A A B B2430 PWA A A B B2432 PWA A A B B2436 PWA A A B B2439 PWA A A B B2442 PWBC PWBC PWBC PWBC PWBC PWBC B B2424 PWBC B B2430 PWBC PWBC PWBC PWBC PWBC PWBC SB18_ W W W1806 SB21_ W W W2106 SB24_ W W W2406 SB24_BUTT W 2 B B W W2406 SB27_ W W W2706 SB30_BUTT W W W3006 SB33_BUTT W 2 B B W W3306 SB36_BUTT W W W3606 SB39_ W W W3906 SB42_ W W W2106 SB45_ W W W4506 SB48_ W W W2406 SBA36 1 A A W W1506 SBMS30BUTT W W3006 SBMS33BUTT 2 B B W W3306 SBMS36BUTT W W3606 SBMS W W3906 SBMS W W2106 SDC18 3 W W0606 SDC24 4 W W0606 SDC30 5 W W0606 SDC36 6 W W0606 SF W W1806 SF W W2106 SF W W2406 SF24BUTT 2 B B W W2406 SF W W2706 Door & Drawer Fronts - Part Index M11 Replacement Parts

170 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code Replacement Parts SF30BUTT W W3006 SF33BUTT 2 B B W W3306 SF36BUTT W W3606 SF W W4006 SF W W2106 SF W W4506 SF W W2406 SFA36 1 A A W W1706 SFA42 N/A N/A 1 W4506 U12_ U12_ U12_ U12_ U15_ U15_ U15_ U15_ U15_ U15_ U18_ U18_ U18_ U18_ U18_ U21_ U21_ U21_ U21_ U24_ U24_84BUTT 2 B B B B2424 U24_ U24_87BUTT 2 B B B B2456 U24_ U24_90BUTT 2 B B B B2430 U24_ U24_93BUTT 2 B B B B2456 U24_ U24_96BUTT 2 B B B B2436 U27_ U27_ U27_ U27_ U27_ U30_84BUTT U30_90BUTT U30_93BUTT U30_96BUTT U33_84BUTT 2 B B B B3356 U33_90BUTT 2 B B B B3356 U33_93BUTT 2 B B B B3356 U33_96BUTT 2 B B B B3356 U36_84BUTT U36_90BUTT U36_93BUTT U36_96BUTT VB12_ W W1206 VB15_ W W1506 VB18_ W W1806 VB21_ W W2106 VB24_34 2 B B W W2406 VB27_ W W2706 VB30_ W W3006 VB33_34 2 B B W W3306 VB36_ W W3606 VBD12_ W W W W1215 VBD15_ W W W W1515 VBD18_ W W W W1815 VBD21_ W W W W2115 VBD24_ W W W W2415 VBWBT15_ NH NH 1 W W1506 VC18_ VC24_34 2 B B2430 VC27_ VC30_ VC33_34 2 B B3330 VC36_ VCD24_ W W W W1215 VCD27_ W W W W1215 M12 Door & Drawer Fronts - Part Index

171 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code VCD30_ W W W W1215 VCD33_ W W W W1215 VCD36_ W W W W1515 VCD42_ W W W W W W1806 VCD48_ B B W W W W W W2406 VCD54_ B B W W W W W W2406 VCD60_ W W W W W W3006 VCDF60_ W W W W W W1515 VCDF60_ W W W W W W1511 VKD24 1 W W2404 VKD30 1 W W3004 VKD36 2 W W1804 VLC15_ VLC15_ W W W W1515 VLC18_ VLC18_ W W W W1815 VLC21_ N/A VSB24_34 2 B B W W2406 VSB27_ W W2706 VSB30_ W W3006 VSB33_34 2 B B W W3306 VSB36_ W W3606 VSB36_ W W W W1806 VSB42_ W W W W1806 VSB48_ B B W W W W2406 VSB60_ B B W W W W2406 VSB60_ B B W W W W W W1215 VSDC6 5 W W0606 VSF W W1806 VSF B B W W2406 VSF W W3006 VSF W W3606 VW24_30 2 B B2430 VWB B B2430 W W W W W W W W W W W W W W W W W W W W W W W W W W W2412BUTT 2 B B2412 W2415BUTT 2 B B2415 W W2418BUTT 2 B B2418 W W2424BUTT 2 B B2424 W W2430BUTT 2 B B2430 W A A2432 W2433BUTT 2 B B2432 W W2436BUTT 2 B B2436 W W2439BUTT 2 B B2439 W W2442BUTT 2 B B2442 W W W W W W W W W W W W3012BUTT W3015BUTT W3018BUTT W3021BUTT W3024BUTT W3027BUTT W3030BUTT W3033BUTT W3036BUTT W3039BUTT Door & Drawer Fronts - Part Index M13 Replacement Parts

172 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code Replacement Parts W3042BUTT W3312BUTT 2 B B3312 W3315BUTT 2 B B3315 W3318BUTT 2 B B3318 W3321BUTT 2 B B3322 W3324BUTT 2 B B3324 W3327BUTT 2 B B3327 W3330BUTT 2 B B3330 W3333BUTT 2 B B3332 W3336BUTT 2 B B3336 W3339BUTT 2 B B3339 W3342BUTT 2 B B3342 W3612BUTT W3615BUTT W3618BUTT W3621BUTT W3624BUTT W3627BUTT W3630BUTT W3633BUTT W3636BUTT W3639BUTT W3642BUTT W W W W W W W W W W W W W W W W W W W W W W W W W W W W W W WA A A2430 WA A A2432 WA A A2436 WA A A2439 WA A A2442 WA A A2430 WA A A2432 WA A A2436 WA A A2439 WA A A2442 WAT A A2430 WAT A A2430 WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WBC WCA WCA WCA WCA WCA WCMSC B B2418 WCMSC WEZR WEZR WEZR2130 WEZR WEZR WEZR2132 WEZR WEZR WEZR2136 WEZR WEZR WEZR2139 WEZR WEZR WEZR2142 WEZR WEZR WEZR2430 WEZR WEZR WEZR2432 WEZR WEZR WEZR2436 WEZR WEZR WEZR2439 WEZR WEZR WEZR2442 WMC27_ WMC30_ WMC30_ WMSC27_ WMSC27_ WMSC30_ WR2430BUTT 2 B B2430 WR3012BUTT WR3015BUTT WR3018BUTT WR3021BUTT WR3024BUTT WR3027BUTT WR3030BUTT WR3312BUTT 2 B B3312 WR3315BUTT 2 B B3315 WR3318BUTT 2 B B3318 WR3321BUTT 2 B B3322 WR3324BUTT 2 B B3324 WR3327BUTT 2 B B3327 WR3330BUTT 2 B B3330 WR3612BUTT WR3615BUTT WR3618BUTT WR3621BUTT WR3624BUTT WR3627BUTT M14 Door & Drawer Fronts - Part Index

173 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code 1/2 Oerlay Full Oerlay Cabinet Qty Door Code Qty Door Code WR3630BUTT WR WR WR WR Replacement Parts Door & Drawer Fronts - Part Index M15

174 PART 1/2 Oerlay Full Oerlay M3656 B 16 29/32 x /4 x 55 5/8 M1856 B N/A 17 5/8 x 55 5/8 B3356 B 15 7/16 x /4 x 55 5/8 B2456 B or W 10 29/32 x /4 x 55 5/ B 16 29/32 x /4 x 55 5/ B 13 29/32 x /4 x 55 5/ B 12 7/16 x /4 x 55 5/ B or W 22 x /8 x 55 5/ B 19 x /8 x 55 5/ B or W 16 x /8 x 55 5/ B 13 x /8 x 55 5/ B 10 x /8 x 55 5/ B or W 19 x /8 x 53 5/ B or W 16 x /8 x 53 5/ B or W 13 x /8 x 53 5/8 Replacement Parts WEZR2442S 10 1/8 x /16 x 41 5/8 WEZR2142S 7 1/8 x /16 x 41 5/8 B3342 B or W 15 7/16 x /4 x 41 5/8 B2442 B or W 10 29/32 x /4 x 41 5/8 A2442 B or W 14 1/2 x /8 x 41 5/ B or W 20 1/2 x /8 x 41 5/ B or W 17 1/2 x /8 x 41 5/ B or W 16 15/16 x /4 x 41 5/ B or W 14 1/2 x /8 x 41 5/ B or W 13 15/16 x /4 x 41 5/ B or W 12 7/16 x /4 x 41 5/ B or W 22 x /8 x 41 5/ B or W 19 x /8 x 41 5/ B or W 16 x /8 x 41 5/ B or W 13 x /8 x 41 5/ B or W 10 x /8 x 41 5/ B or W 7 x /8 x 41 5/8 SIncludes 2 doors hinged together size listed is for one door WEZR2439S 10 1/8 x /16 x 38 5/8 WEZR2139S 7 1/8 x /16 x 38 5/8 B3339 B or W 15 7/16 x /4 x 38 5/8 B2439 B or W 10 15/16 X /4 X 38 5/8 A2439 B or W 14 1/2 x /8 x 38 5/ B or W 20 1/2 x /8 x 38 5/ B or W 17 1/2 x /8 x 38 5/ B or W 16 29/32 x /4 x 38 5/ B or W 14 1/2 x /8 x 38 5/ B or W 13 29/32 x /4 x 38 5/ B or W 12 7/16 x /4 x 38 5/ B or W 22 X /8 X 38 5/ B or W 19 x /8 x 38 5/ B or W 16 x /8 x 38 5/ B or W 13 x /8 x 38 5/ B or W 10 x /8 x 38 5/ B or W 7 x /8 x 38 5/8 SIncludes 2 doors hinged together size listed is for one door WEZR2436S 10 1/8 x /16 x 35 5/8 WEZR2136S 7 1/8 x /16 x 35 5/8 B3336 B or W 15 7/16 x /4 x 35 5/8 M16 Door & Drawer Fronts - Sizes

175 PART 1/2 Oerlay Full Oerlay B2436 B or W 10 29/32 x /4 x 35 5/8 A2436 B or W 14 1/2 x /8 x 35 5/ B or W 20 1/2 x /8 x 35 5/ B or W 17 1/2 x /8 x 35 5/ B or W 16 23/32 x /4 x 35 5/ B or W 14 1/2 x /8 x 35 5/ B or W 13 15/16 x /4 x 35 5/ B or W 12 7/16 x /4 x 35 5/ B or W 22 x /8 x 35 5/ B or W 19 x /8 x 35 5/ B or W 16 x /8 x 35 5/ B or W 13 x /8 x 35 5/ B or W 10 x /8 x 35 5/ B or W 7 x /8 x 35 5/8 SIncludes 2 doors hinged together size listed is for one door B3333 B or W 15 7/16 x /4 x 32 1/8 B2433 B 10 15/16 x /4 x 32 1/ B or W 16 15/16 x /4 x 32 1/ B or W 13 29/32 x /4 x 32 1/ B or W 12 7/16 x /4 x 32 1/ B or W 22 x /8 x 32 1/ B or W 19 x /8 x 32 1/ B or W 16 x /8 x 32 1/ B or W 13 x /8 x 32 1/ B or W 10 x /8 x 32 1/8 WEZR2432S 10 1/8 x /16 x 32 5/8 WEZR2132S 7 1/8 x /16 x 32 5/8 B3332 B or W 15 7/16 x /4 x 32 5/8 B2432 B 10 15/16 x /4 x 32 5/8 A2432 B or W 14 1/2 x /8 x 32 1/ B or W 16 15/16 x /4 x 32 5/ B or W 14 1/2 x /8 x 32 5/ B or W 13 15/16 x /4 x 32 5/ B or W 12 7/16 x /4 x 32 5/ B or W 22 x /8 x 32 5/ B or W 19 x /8 x 32 5/ B or W 16 x /8 x 32 5/ B or W 13 x /8 x 32 5/ B or W 10 x /8 x 32 5/ B or W 7 x /8 x 32 5/8 SIncludes 2 doors hinged together size listed is for one door Replacement Parts WEZR2430S 10 1/8 x /16 x 29 5/8 WEZR2130S 7 1/8 x /16 x 29 5/8 MC2430 B 22 x /8 x 29 5/8 B3330 B or W 15 7/16 x /4 x 29 5/8 B2430 B or W 10 29/32 x /4 x 29 5/8 A2430 B or W 14 1/2 x /8 x 29 5/ B or W 20 1/2 x /8 x 29 5/ B or W 17 1/2 x /8 x 29 5/ B or W 16 29/32 x /4 x 29 5/ B or W 14 1/2 x /8 x 29 5/ B or W 13 29/32 x /4 x 29 5/ B or W 12 7/16 x /4 x 29 5/ B or W 22 x /8 x 29 5/ B or W 19 x /8 x 29 5/8 Door & Drawer Fronts - Sizes M17

176 PART 1/2 Oerlay Full Oerlay 1830 B or W 16 x /8 x 29 5/ B or W 13 x /8 x 29 5/ B or W 10 x /8 x 29 5/ B or W 7 x /8 x 29 5/8 SIncludes 2 doors hinged together size listed is for one door B3327 B or W 15 7/16 x /4 x 26 5/8 B2427 B or W 10 15/16 x /4 x 26 5/ B or W 17 1/2 x /8 x 26 5/ B or W 16 29/32 x /4 x 26 5/ B or W 13 29/32 x /4 x 26 5/ B or W 12 7/16 x /4 x 26 5/ B or W 22 x /8 x 26 5/ B or W 16 X /8 X 26 5/ B or W 13 X /8 X 26 5/ B 16 x 22 1/2 17 5/8 x 24 1/8 Replacement Parts B3324 B or W 15 7/16 x 21 1/2 16 1/4 x 23 1/8 B2424 B or W 10 29/32 x 21 1/2 11 3/4 x 23 1/8 A2424 B or W 14 1/2 x 21 1/2 14 5/8 x 23 1/ B or W 20 1/2 x 21 1/2 22 1/8 x 23 1/ B or W 17 1/2 x 21 1/2 19 1/8 x 23 1/ B or W 16 29/32 x 21 1/2 17 3/4 x 23 1/ B or W 13 29/32 x 21 1/2 14 3/4 x 23 1/ B or W 12 7/16 x 21 1/2 13 1/4 x 23 1/ B or W 22 x 21 1/2 23 5/8 x 23 1/ B or W 19 x 21 1/2 20 5/8 x 23 1/ B or W 16 x 21 1/2 17 5/8 x 23 1/ B or W 13 x 21 1/2 14 5/8 x 23 1/ B or W 10 x 21 1/2 11 5/8 x 23 1/8 B3322 B or W 15 7/16 x /4 x 20 5/ B or W 17 1/2 x /8 x 20 5/ B or W 16 29/32 x /4 x 20 5/ B or W 13 29/32 x /4 x 20 5/ B or W 12 7/16 x /4 x 20 5/ B or W 16 x /8 x 20 5/ B or W 13 x /8 x 20 5/8 B3318 B or W 15 7/16 x /4 x 17 5/8 B2418 B or W 10 29/32 x /4 x 17 5/ B or W 17 1/2 x /8 x 17 5/ B or W 16 29/32 x /4 x 17 5/ B or W 13 29/32 x /4 x 17 5/ B or W 12 7/16 x /4 x 17 5/ B or W 22 x /8 x 17 5/ B or W 19 x /8 x 17 5/ B or W 16 x /8 x 17 5/ B or W 13 x /8 x 17 5/ B or W 10 x /8 x 17 5/ B 13 x 15 1/2 14 5/8 x 16 5/8 B3315 B or W 15 7/16 x /4 x 14 5/8 B2415 B or W 10 29/32 x /4 x 14 5/ B or W 17 1/2 x /8 x 14 5/ B or W 16 29/32 x /4 x 14 5/8 M18 Door & Drawer Fronts - Sizes

177 PART 1/2 Oerlay Full Oerlay 3015 B or W 13 29/32 x /4 x 14 5/ B or W 12 7/16 x /4 x 14 5/ B or W 13 x /8 x 14 5/8 B3312 B or W 15 7/16 x /4 x 11 5/8 B2412 B or W 10 29/32 x /4 x 11 5/ B or W 17 1/2 x /8 x 11 5/ B or W 16 29/32 x /4 x 11 5/ B or W 13 29/32 x /4 x 11 5/ B or W 12 7/16 x /4 x 11 5/8 EZR3633 BS 10 1/8 x /16 x 29 5/8 7 1/8 x /16 x 29 5/8 EZR36 BS 10 1/8 x /16 x 29 5/8 EZR3336 BS 7 1/8 x /16 x 29 5/8 10 1/8 x /16 x 29 5/8 EZR33 BS 7 1/8 x /16 x 29 5/8 SIncludes 2 doors hinged together size listed is for one door W x /8 x 29 5/8 W3615 N/A 11 3/8 x 35 5/8 W3015 N/A 11 3/8 x 29 5/8 W2715 N/A 11 3/8 x 26 5/8 W2415 N/A 11 3/8 x 23 5/8 W1815 N/A 11 3/8 x 17 5/8 W1515 N/A 11 3/8 x 14 5/8 W1215 N/A 11 3/8 x 11 5/8 W /8 x 34 N/A W /8 x 28 N/A W /8 x 25 N/A W /8 x 22 N/A W /8 x 16 N/A W /8 x 13 N/A W /8 x 10 N/A Replacement Parts W2113 N/A 11 1/8 x 20 5/8 W1813 N/A 11 1/8 x 17 5/8 W1213 N/A 11 1/8 x 11 5/8 W /16 x x 17 5/8 W /4 x /8 x 32 5/8 W /4 x /8 x 29 5/8 W /4 x /8 x 26 5/8 W /4 x /8 x 23 5/8 W /4 x /8 x 17 5/8 W /4 x /8 x 14 5/8 W /4 x /8 x 11 5/8 W3010 N/A 9 1/8 x 29 5/8 W /2 x /8 x 26 5/8 W /2 x 19 N/A W /2 x 16 N/A W /2 x 10 N/A Door & Drawer Fronts - Sizes M19

178 PART 1/2 Oerlay Full Oerlay W3308 N/A 7 5/8 X 32 5/8 W3008 N/A 7 5/8 X 29 5/8 W2708 N/A 7 5/8 X 26 5/8 W2408 N/A 7 5/8 x 23 5/8 W /2 x 28 N/A W /2 x 25 N/A W /4 x 17 1/2 6 1/8 x 19 1/8 W /4 x /8 x 35 5/8 W /4 x /8 x 32 5/8 W /4 x /8 x 29 5/8 W /4 x /8 x 26 5/8 W /4 x /8 x 23 5/8 W /4 x /8 x 20 5/8 W /4 x /8 x 17 5/8 W /4 x 14 1/2 6 1/8 x 16 1/8 W /4 x /8 x 14 5/8 W /4 x /8 x 11 5/8 W /4 x 7 6 1/8 x 8 5/8 W0606; 5 1/2 x 5 13/16 5 1/2 x 5 13/16 ;For spice drawer cabinet only Replacement Parts W /2 x /8 x 32 5/8 W /2 x /8 x 29 5/8 W /2 x /8 x 26 5/8 W /2 x /8 x 23 5/8 W /2 x /8 x 17 5/8 M20 Door & Drawer Fronts - Sizes

179 CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGE 1 1ATQ L20, K1 1BIS K1 1DFWROT J6 1DROT J6 1DRS K1 1FWROT J5 1MD K3 1MDATQ K3 1ROT J5 1SD K2 1SDATQ K L16 2ATQ K1 2BIS K1 2DFWROT J6 2DROT J6 2DRS K1 2FWROT J5 2GCS8 A5 2MD K3 2MDATQ K3 2ROT J5 2SD K2 2SDATQ K L L L L L L17 3ATQ K1 3BIS K1 3DFWROT J6 3DROT J6 3DRS K1 3FWROT J5 3MD K3 3MDATQ K3 3ROT J5 3SD K2 3SDATQ K2 4 4ATQ K1 4BIS K1 4DFWROT J6 4DROT J6 4DRS K1 4FWROT 4MD 4MDATQ 4ROT 4SD 4SDATQ 5 J5 K3 K3 J5 K2 K2 506 L16 5DFWROT J6 5DROT J6 5FWROT J5 5ROT 6 6DFWROT 6DROT 6FWROT 6ROT 7 J5 J6 J6 J5 J L L L L L L L L L L L L L L L L L L L L L L L L L22 A AA0C8 A7 AA0M8 AB7C8 AB7M8 AB9C8 AB9M8 ACIC8 ACIM8 AC2M8 AC ACCV ACGN ACM ACNA ACPC ACPR ACSAD ACVG ACWH AOSC ASC ASI ASPO AW8 AWE B B BBC BBMC BC BD BDDC BEA BEAS BEC BECS BEOS BEP BEPL BEZRS BF BFC BFF BFOL BFP BM BMC BMCE BOCU BOX A7 A4 A4 A4 A4 A1 A1 A5 L13 M7 M7 L3 M7 M7 M7 M7 M7 M7 L6 C4 C4 L12 L11 L13 A6 L8 E1, E2, E3, E4, E22 E13 E11 E29 E4 E5 E18 J3 E18 J3 E18 E30 J1 J3 E28 E29 E28 E28 E20 L5 E11 E11 E10 M3, M4, M5 BPP BPPS BS BSDC BTP BWBFMK BWBT BWR C CBDMK CBE CC CCK CCM CD CDK CFO CHB CHBK CL CLDF CM CP CR CRHCP CRHF CTS CVC D DDFD DDO DDR DE DF DFOL DIP DKD DRHC8 DRHM8 DROT DSB DWBT EDBL EDS EGE EZR EZRS E E21 E5 J3 E21 E20 E23 E22 E21 E26 L11 E25 E25 L4 E26 E26 C6 E26 E26 L14 C7 L3 L15 L9 D23, D24 D22 L1 L13 H2 H1 H1 L5 H3 H3 E10 H2 A3 A3 J6 E6 H2 L10 L10 L11 E14, E15, E16, E17 J3 F FB FBS FE FFE FL FMBEP FMDEP FMTEP FMVEP FMWEP FP FB FPMBEP FPMWEP FRL FSCV FSGN FSNA FSPC FSPR FSSAD FSVG FSWH G GC GD GRPO GSK GSKPWA GSKWA GSKWZ HSD ICM ID ILR IVI H I K KS KSCC KSCCK KSK I2 I1, I2 D31, E29 D31, E29 L14 E30 H4 F9 G10 D33 L15 C4 E30 D33 L14 M8 M8 M8 M8 M8 M8 M8 M8 L13 C7 L13 J2 J2 J2 J2 E10 L5 C6 L5 L11 E25 E25 E25 E25 Nomenclature Index Nomenclature Index N1

180 Nomenclature Index N2 Nomenclature Index CODE PAGE CODE PAGE CODE PAGE CODE PAGE CODE PAGE L LCM L4 LCVM L4 LM L9 LOSC L6 LRM L7 LSA E14 LSAS J3 LSK D30, E24 LW D19 LY8 A2 M M MBEP E31 M MDEP H4 M MTEP F9 M MVEP G10 MBEP E30 MC G7 MDEP H4 MDRS M5 C5 FP C5 P C5 V C4 ML8 A6 MM L6 MOSC L7 MP8 A2 MSP F2 MTEP F9 MTK E31, F10, G10, H4 MVEP G10 MWCS J3 MWEP D33 N NBM L5 O O D27 OC F3, F4, F5 OGE L6 OGP L9 OSC L6 OVR L12 P PB E8, E9 PBBC E13 PBEOS E19 PBS J3 PDO E27 PDOPK E27 PDR M1 C3 B C3 PFDR M1 PH170EZ M6 PHBF M6 PHSC M6 PHSC12 M5 PHSC1516 M5 PMBEP E30 PMF L10 PMP L10 PMR L10 PMWEP D33 PSCBPPDR M2 PSCDC M3 PSCDR M2 PSCVBPDR M2 PSP L15 PW D8, D9, D10 PWA D14 PWAS J3 PWBC D13 PWEZRS J3 PWS J3 Q QPCV M7 QPVG M7 QPWH M7 QR L7 QSTC19 M7 QSTGN M7 QSTNA M7 QSTPC M7 QSTPR M7 QSTSAD M7 R R L12 RC L14 RCWB E23 C6 REP F8 RM L7 ROT J6, J7 ROTDK J7 ROTK M1 RTKB C8 RTKL C8 RTKP C8 RTKPB C8 RTKPL C8 RTKPR C8 RTKR C8 RWB E23 S S3S L9 SB E6 SBA E7 SBDSU E27 SBDSUK E27 SBE L8 SBMS E6 SBMSSK E24 SBPBS E27 SBPBSK E27 SCM L3 SCVM L4 SDC D26 SDI E26 SDIK E26 SF E7 SFA E7 SGH D29 SGO L12 SHO8 L8 SK J2 SM L8 SRK D30 STB E28 SUT E25 SUTK E25 T TASC L12 TBE L7 TBM L9 TC F7 TEP F8 TF F6 TFC F7 TFF F7 TFOL F6 TLR L4 TPCV M8 TPGN M8 TPL L14, L15 TPNA M8 TPPC M8 TPPR M8 TPSAD M8 TPVG M8 TPWH M8 TS D25 TSA D25 TUKCV M8 TUKGN M8 TUKNA M8 TUKPC M8 TUKPR M8 TUKSAD M8 TUKVG M8 TUKWH M8 TV G7 TVS J4 TWE L8 U U F1, F2 UCS D29 UT E24 UTK E24 V V L1, L2 VB G5 VBD G5 VBWBT G6 VC G4, G9 VCD G3, G4 VCDF G3, G4 VDA C7 VDO C8 VEP G9 VF G8 VFC G9 VFF G8 VFOL G8 VFP G6 VKD G5 VLC G6 VMAS J4 VSB G1, G2 VSDC D26 VSF G2 VW G7 VWB G7 W W D1, D2, D3, D4, D5, D6, D7 WA D14, D15 WAS J3 WAT D15, D16 WB D32 WBC D12, D13 WBEP E30 WBL E23 WC D32 WCA D17 WCAS J3 WCD D19 WCMSC D21 WDEP H3 WEOS D17 WEP D33 WEZR D16 WEZRS J3 WF D30 WFC D32 WFF D31 WFOL D31 WFP D28 WHCC D22 WHCCRPV D23 WHCP D24 WMC D20 WMSC D21 WMTK E31, F10, G10, H4 WOC D18 WPL J1 WR D1, D2, D3, D4, D5 WRS J3 WS D29, J3 WSC D19 WSK J1 WSVWB J4 WTCD E27 WTCDK E27 WTDK E24 WTEP F8 WVEP G9 WWEP D32 WWR D27

181 Mandatory Steps to Produce an Order in Design 1. Place one item from a KraftMaid catalog into Design. 2. Select Styles & Pricing. Click the Styles & Pricing icon or select it from the drop-down menu in Design on the tool bar. 3. Select KraftMaid catalog from list on left. 4. Select Door Style Selection*, double click or click the Add button, and then select the door style from the door style selection window. (Required.) Select Drawer Front Options, click the Add button, and then select a Construction Option from the Drawer Construction Options Window. (Optional.) Select Construction Options, double click or click the Add button, and then select a Construction Option from the Cabinet Box Construction Options Window. (Optional.) Select Finish Selection, double click or click the Add button, and then select the Finish from the Finish Selection Window. Een if the finish you choose has no upcharge, you must select a finish. 5. Select the Catalog Charges tab. In the Value box, use the drop down menu to select the catalog Item# rate that your design was created in. 6. Select Close to return to Design. 7. Complete the design. 8. Proceed to produce your Lowe s Quote or Sell to Genesis. By following these steps, your quote or order will print all charges for any options after the Cabinets Sub-Total. * Important Note Setting the Door Style in Door Style Selection will apply the appropriate price for the selected door style. Setting the Common Price Leel on the Price Leels tab is no longer required. The default price leel of Chosen Door Style will always be used and will change based on the door style selected. Door Code Door Style Item # AC1C8 S.Cayden Cherry AC1M8 S.Cayden Maple LY8 S.Deeron Cherry MP8 S.Deeron Maple DRHC8 S.Durham Cherry DRHM8 S.Durham Maple AB9C8 S.Fox Ridge Cherry Full AB7C8 S.Fox Ridge Cherry Half AB9M8 S.Fox Ridge Maple Full AB7M8 S.Fox Ridge Maple Half GCS8 S.Gentry Cherry AC2M8 S.Gentry Maple AW8 S.Malibu Cherry ML8 S.Malibu Maple AA0C8 S.Templeton Cherry AA0M8 S.Templeton Maple

182 KraftMaid Cabinetry is proud to hae earned the KCMA Certification Seal for all door styles. KraftMaid Cabinetry carries the seal of the Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A and paragraph , HUD Minimum Property Standards Housing KraftMaid Cabinetry demonstrates its commitment to enironmental sustainability through meeting or exceeding the requirements as outlined in the Enironmental Stewardship Program certification, administered by KCMA. All KraftMaid facilities hae also obtained ISO certificate of approal, demonstrating our commitment to reducing the impact of operations on the enironment. KraftMaid Cabinetry took on 13 tough KCMA tests and passed them all...beautifully. Sheles and bottoms are loaded at 15 pounds per square foot to help ensure no excessie deflection or isible sign of joint separation or failure. Mounted wall cabinets are loaded to help ensure that the cabinet will accept net loading in compliance with ANSI A requirements. A load of up to 250 pounds, based on the type of cabinet, is applied against the inside of cabinet fronts to help ensure reliable front joints. A 3 pound steel ball is drop tested from a height of 6 against sheles, cabinet bottoms and drawer bottoms to help ensure cabinets will withstand dropping of cans and other items. Cabinets are impact tested by striking the center of a closed and open door from 12 with a 10 pound sand bag at a 90º angle. Cabinet doors are weighted with 65 pounds and operated 10 times to test the ability of the door and hinges to withstand loading. Doors are opened and closed for 25,000 cycles to help ensure durability under the stress of normal usage. Drawers and drawer mechanisms are tested at 15 pounds per square foot and operated through 25,000 opening and closing cycles to assure durability. A 3 pound weight is dropped 10 times against drawer assembly to help ensure that drawer front assembly will withstand the impact of closing. Cabinets are hot box tested at temperatures up to 120ºF for 24 hours to help ensure finish will withstand high heat. Cabinets are cycle tested at temperatures ranging from -5ºF to +120ºF to help ensure finish will withstand temperature changes. A 24-hour soap and water solution test checks finish ability to withstand exposure to detergents and moisture. Finish is exposed to inegar, grape juice, olie oil, lemon juice, 100 proof alcohol and more to help ensure no appreciable discoloration, stain or whitening of the finish.

183 E N V I R ON M E N TA L S T E W A R DS HI P P R OGR A M C E R T I F I E D E S P Masco Cabinetry. All rights resered. Specifications subject to change without notice. KMS-LWSC0215