SuS Stock-List. Made by: Loroch Model: CNBS 80 Year: 2011 Category: Band and circular saw blade processing

Transcription

1 Bandsaw grinding machine Article M01123Machine - Made by: Loroch Model: CNBS 80 Year: 2011 Category: Band and circular saw blade processing Suitable for resharpening of CV-, bimetal and carbide tipped bandsaw blades from 8-80 mm width. Bandsaw width 8-80 mm, tooth pitch approx mm, sawblade thickness approx. 0,5-3 mm, sawblade length min 1400 mm or 2800 mm - max mm, clearance angle -10 to + 25 freely selectable, grinding speed approx mm / min, Radius grinding wheel (14F1) CBN or DIA, wheel diameter 200 mm, wheel width max. 3 mm, centrebore diameter 32 mm, grinding motor rating 0,5 kw, connected load approx. 1,5 kw (400 V / 50 Hz), weight approx. 350 kg, dimensions (with cross roller) w x d x h = 2000 x 1117 x 2210 mm, colour light grey / dark grey. Coolant system, Hood, Free programmable tooth forms, 1 saw mount, 1 grinding wheel mount. Tension Rolling machine Article M01032 Machine - Made by: PetschauerModel: SW 1200 S5 Year: 2016 Category: Band and circular saw blade processing Suitable for quick and precise tension rolling of circular sawblades. Sawblade diameter max mm, rolling circle 160 to 990 mm, working radius 300 mm, max. roller pressure approx. 200 bar, oil tank 20 L, drive output 2,2 kw, dimensions w x d x h = ca x 620 x 1550 mm, weight approx. 820 kg, connected load 5,1 kw (400 V / 50 Hz), colour grey / green. Grease gun, Sickle spanner, Saw retainer flange Ø 200 mm, Saw retainer flange Ø 80 mm, 2 rollers (mounted), Pedal (mounted), Operator tools. page 1 from 36

2 Coolant Cleaning System Article M00892 Machine - Made by: Wendt (System Transor) Model: Fluid Master 730 Year: 2008 Category: Coolant Cleaning Systems Suitable for cleaning of carbide from coolant oil Capacity approx. 790 l, volumetric flow rate max l/min., Filter unit: larger than 0,003 mm, connected load approx. 25 kva (400 V / 50 Hz), dimensions w x d x h= 1940 x 1190 x 1497 mm, weight approx. 900 kg, colour grey. 1 filter tower, automatic back flushing, Submersible chiller unit. Coolant Cleaning System Article M00891 Machine - Made by: Wendt (System Transor) Model: Fluid Master 730 Year: 2008 Category: Coolant Cleaning Systems Suitable for cleaning of carbide from coolant oil Capacity approx. 790 l, volumetric flow rate max l/min., Filter unit: larger than 0,003 mm, connected load approx. 25 kva (400 V / 50 Hz), dimensions w x d x h= 1940 x 1190 x 1497 mm, weight approx. 900 kg, colour grey. 1 filter tower, automatic back flushing, Submersible chiller unit. page 2 from 36

3 Coolant cleaning unit Article M01061 Machine - Made by: Transor Model: A Year: 2000 Category: Coolant Cleaning Systems Suitable to clean cooling oils for carbide grinding. Capacity 800 l, volumetic flow rate l/min., filter unit: larger than mm, connected load approx. 4.0 kw (400 volts / 50 Hz), dimensions w x d x h = 1650 x 1000 x 1370 mm, weight approx. 500 kg, colour grey. 2 filter towers automatic back flushing Coolant cleaning unit Article M00867 Machine - Made by: Transor Model: A Year: 2001 Category: Coolant Cleaning Systems Suitable to clean cooling oils for grinding carbide. Capacity ca. 500 l, volumetic flow rate ca l/min., filter unit > mm, connected load approx 400 volts / 50 Hz, dimensions w x d x h = 1210 x 1000 x 2100 mm, weight approx. 750 kg, colour blue 1 filter tower, automatic back flushing. page 3 from 36

4 Coolant cleaning unit Article M01036 Machine - Made by: Transor Model: A Year: 1999 Category: Coolant Cleaning Systems Suitable to clean cooling oils for grinding carbide. Capacity ca. 500 l, volumetic flow rate ca l/min., filter unit > mm, connected load approx 400 volts / 50 Hz, dimensions w x d x h = 1950 x 1000 x 1370 mm, weight approx. 400 kg, colour light grey. 1 filter tower, automatic back flushing, Coolant cleaning unit Article M01075 Machine - Made by: Transor Model: A Year: 2001 Category: Coolant Cleaning Systems Suitable to clean cooling oils for carbide grinding. Capacity 800 l, volumetic flow rate l/min., filter unit: larger than mm, connected load approx. 4.0 kw (400 volts / 50 Hz), dimensions w x d x h = 1650 x 1000 x 2000 mm, weight approx kg, colour grey. 2 filter towers automatic back flushing page 4 from 36

5 Automatic Cutting Off Machine Article M01100 Machine - Made by: Petschauer Model: TR 35 Year: 2008 Category: Cut-off machines Suitable to automatically cut-off HSS and solid tungsten carbide tools / materials etc. The rods / endmiss are brought into position via a laser line guide and subsequently clamped with 3 sided jawchuck manually. Clamping range 3-35 mm, work piece length = 500 mm, cutting wheel Ø 200 mm, motor rating 4 kw, rpm., drive speed of the grinding spindle adjustable via potentiometer rpm., flow rate of coolant pump ca. 140 l/min., connected load 4.5 k W (400 V / 50 Hz), dimensions l x w x h = 1100 x 1550 x 1630 mm. Total enclosure, Coolant system, Stepless speed control from rpm, Machine lamp, Adjustable longitudinal stop. page 5 from 36

6 Erosion machine for diamond tipped metalworking tools (CNCcontrolled) Article M01079 Machine - Made by: Vollmer Model: QM 71 P Year: 1998 Category: Erosion machines Suitable to automatically sharpen PKD-tipped milling cutters, cylindrical tools, discoid tools etc. Milling cutters outside dia. up to 250 mm, cutting edge length up to 100 mm, shaft tool dia. from mm, cutting length max. 100 mm, discoid tools outside dia. up to 380 mm, discoid tools with base outside dia. up to 520 mm, outside dia.cutting edge length max. 20 mm, max. workpiece weight 20 kg, traversing range X-axis 280 mm, traversing range Y-axis 280 mm, traversing range Z-axis 330 mm, A-axis swivel range 360, A-axis mount taper SK 40, B-axis swivel range + / - 30, C-axis swivel range 120, D-axis swivel range, + / - 15, speed from rpm, dimensions machine w x d x h = 2700 x 2420 x 2270 mm, weight approx 2900 kg, connected load approx. 2.5 kw (400 volts / 50 Hz) colour turquoise / light grey. Software for cutters, milling cutters, profiles, saw blades, Total enclosure, Cooling system for dielectric fluid, Probe, Automatic central lubrication, Automatic fire extinguishing system, Workpiece mount ISO 40, Measuring mandrel, Machine lamp. Electro-static air cleaner Article M00893 Machine - Made by: DSL Model: AES Sigma 15 Year: 1999 Category: Extractors all Types Suitable to clean / extract oil mist and emulsion mist. Fits on Walter Helitronic (R)-Power, Helitronic Power Regrinder and Helitronic Power Production. Volume flow 900 m³/h, temperature max. 45, motor output 1,25 kw, noise level 75 db (A), connected load approx kw (400 volts / 50 Hz), dimensions w x d x h 1300 x700 x 400 mm, colour dark grey. Control lamp. page 6 from 36

7 Electro-static air cleaner Article M00983 Machine - Made by: Elbaron Model: RON A 1500 DH Year: 2000 Category: Extractors all Types Suitable to clean / extract oil mist and emulsion mist. Volume flow 1600 m³/h, motor rating 0,54 kw, connected load (230 volts / 50 Hz), dimensions w x d x h = 1150 x 725 x 610 mm, weight approx. 97 kg, colour grey. - Electro-static air cleaner Article M00984 Machine - Made by: Elbaron Model: RON A 1500 DH Year: 2001 Category: Extractors all Types Suitable to clean / extract oil mist and emulsion mist. Volume flow 1600 m³/h, motor rating 0,54 kw, connected load (230 volts / 50 Hz), dimensions w x d x h = 1150 x 725 x 610 mm, weight approx. 97 kg, colour grey. - page 7 from 36

8 Mist Extractor Article N183 Machine - Made by: Vollmer Model: N183 Year: 2012 Category: Extractors all Types Suitable to clean / extract oil mist and emulsion mist. Volume capacity 700 m³/h, filter steps 2, diameter connection point 250 mm, noise level 78 db (A), connected load 1,32 kw (400 volts / 50 Hz), weight 131 kg, dimensions w x d x h = 630 x 475 x 1300 mm, colour grey RAL Mist Extractor Article M01081 Machine - Made by: Vollmer Model: N 181 Year: 2014 Category: Extractors all Types Suitable to clean / extract oil mist and emulsion mist. Volume capacity 500 m³/h, filter steps 3, diameter connection point 2 x 150 mm, temperature < 40 C, connected load 0,55 kw (400 volts / 50 Hz), weight 72,5 kg, dimensions w x d x h = 1020 x 475 x 4750 mm, colour grey RAL page 8 from 36

9 HSS and Segment sawblade grinding machine - CNC controlled. Article M01077Machine - Made by: Loroch Model: KSC 710 Year: 2004 Category: HSS and segmental circular saw blade processing Suitable to sharpen or re-cut and chamfer automatically HSS and segmental circular saw blades as well as solid carbide saw blades in creep feed grinding method by using CBN or diamond grinding wheels. Working range manual diameter mm, working range automatic diameter (75) mm, automatic chamfering diameter /710 mm, (optional from 100 mm possible), tooth pitch 1-55 mm, number of teeth 2 998, sawblade thickness up to 8 mm, coolant pressure approx 10 bar, coolant tank capacity approx 400 l, grinding wheel diameter 200 x 32 mm, grinding motor 3 kw, connected load approx. 10 kw / 400 V / 60 Hz, weight approx kg, dimensions w x d x h 2540 x 2662 x 2200 mm, colour blue RAL / light grey RAL HSS and segmental circular saw blade chamfering machine (automatic) Article M01126 Machine Made by: Loroch Model: AK Year: 1995 Category: HSS and segmental circular saw blade processing Suitable to chamfer (bevel) automatically HSS and segmental circular saw blades. Saw dia mm, tooth pitch 3-25 mm, max. saw thickness 6.5 mm, chamfer angle 45, working rate stepless adjustable teeth/min., CBN grinding wheel dia. 200 mm, grinding wheel, centre bore dia. 32 mm, connected load approx. 2 kw (400 volts / 50 Hz), weight approx. 600 kg, dimensions w x d x h = 1400 x 1200 x 2200 mm, colour grey. Total enclosure, Extractor, Manual central lubrication, Machine lamp, 1 grinding wheel flange, 1 saw blade mounting bolt. page 9 from 36

10 HSS and segmental circular saw blade sharpening machine (CNC controlled) Article Ekostar_2017Machine - Made by: Loroch Model: Ekostar 760 Year: 2017 Category:HSS and segmental circular saw blade processing Suitable to sharpen or re-cut and chamfer automatically HSS and segmental circular saw blades as well as solid carbide saw blades in creep feed grinding method by using CBN grinding wheels. Sawblade dia. From (20) mm, tooth pitch 1-25 mm, number of teeth 2-998, saw thickness up to 8 mm, grinding wheel dia. 200 mm, grinding wheel centre bore dia. 32 mm, connected load 7,8 kw (400 volts / 50 Hz), weight approx kg, dimensions w x d x h = 985 x 1750 x 2015 mm, colour telegrey RAL Total enclosure, Coolant system with high pressure cooling with 6 bar and 240 L tank, Sawblade mount F-1004 for saws with dia mm, Power clamping lock, Automatic central lubrication, Motorised adjustment of sawblade carrier, Software for all standard curved and pointed teeth sawblades, Software for grinding sawblades with variable tooth pitch, Software for semi-automatic chamfering or regular teeth sawblades, Program for single segment grinding to grind newly inserted segments down to size, Software for grinding Trennjäger sawblades, Software cylindrical grinding for removal of existing toothing, Machine lamp 1 set of calibration tools, 1 grinding wheel mount Ø 90 mm 1 Powergrind CBN grinding wheel 200 x 2,0 x 32 mm. page 10 from 36

11 HSS and segmental circular saw blade sharpening machine (CNC controlled) Article M01125Machine - Made by: Loroch Model: KBN 560 Year: 2001 Category: HSS and segmental circular saw blade processing Suitable to automatically sharpen or re-cut HSS and segmental circular saw blades as well as solid carbide saw blades in creep feed grinding method by using CBN or diamond grinding wheels. Working range: dia. (20) mm, tooth pitch 1-25 mm, number of teeth 2-998, saw thickness up to 8 mm; Grinding wheels: grinding wheel dia. 200 mm, grinding wheel centre bore dia. 32 mm, connected load 7 kw (400 volts / 50 Hz), weight approx kg, dimensions w x d x h = 1568 x 1750 x 1995 mm, colour turquoise. Total enclosure, Coolant system approx 300l tank, Automatic central lubrication, Machine light, 1 grinding wheel flange, 1 sawblade mount with flange. Edge-Honing machine Article MSA Machine - Made by: Göckel Model: MSA Year: 2009 Category: Knife grinding machines Used for automatically deburring and honing of industrial knives Magnetic chuck length 3000 mm, automatic setting of proper angle and honing pressure, knives of any length and of any angle can be honed together in one setup. - page 11 from 36

12 Knife Grinding Machine (automatic) Article G55 el Machine - Made by: Göckel Model: G55 el Year: 2010 Category: Knife grinding machines Suitable to grind automatically planer knives, chipper knives, veneer knives, paper knives and machine knives. Magnetic chuck length 3000 mm, magnetic chuck width 155 mm, grinding height approx. 120 mm, grinding width 225 mm, grinding spindle speed 1500 rpm, grinding motor 11 kw, grinding wagon speed stepless adjustable 0,02-30 m/min., grinding ring diameter 250 mm, connected load approx. 20 kw (400 volts / 50 Hz), weight approx kg, dimensions w x d x h = 4800 x 900 x 1400 mm, colour white / blue. Coolant system Stepless adjustable grinding wagon drive, Motorised grinding motor height adjustment, Turnable electromagnetic chuck, Polarity switchable grinding motor, Automatic, preselectable infeed, Manual central lubrication, 1 quick changing flange for swift exchange of grinding wheel, 1 grinding ring mount Ø 200 mm, 1 grinding ring mount Ø 100 mm, 1 intermediate flange for diamond grinding wheels, 1 additional manual device with bed extension. page 12 from 36

13 4- Axis CNC tool measuring machine Article M01127 Machine - Made by: Walter Model: Helicheck Basic Year: 2008 Category: Measuring and presetting Suitable for fully automatic and touch-less measuring of cutting tools of all kinds. By means of 2 CCD matrix cameras, reflected-light and transmitted light measurements are performed. For example diameter, length, angles, spiral angle, spiral length, clearance angle, cutting angle etc. can be measured. Movement X axis 270 mm, movement Y axis 460 mm, movement Z axis 325 mm, A axis rotation 360, workpiece adaption ISO 50, workpiece diameter mm, workpiece length max. 400 mm, workpiece weight max. 25 kg, connected load 2 kw (230 volts / 50 Hz), machine weight ca kg, dimensions w x d x h = 1290 x 1185 x 1933 mm, colour signal white RAL 9003, Iron grey RAL Total enclosure, Software P199 Grinding wheels, Software Easy Check, Software Quick Check Turbo, Software Quick Check grinding wheels, Software Quick Check Modular, Software QCM Open Interface, Software QCM Network, Software WWM Network, Software LightControlDevice, Software DYMO LabelWriter. page 13 from 36

14 CNC tool measuring machine Article M00804 Machine - Made by: Walter Model: Toolcheck Year: 2001 Category: Measuring and presetting Suitable for fully automatic and touch-less measuring of cutting tools of all kinds. By means of 2 CCD matrix cameras, reflected-light and transmitted light measurements are performed. For example diameter, length, angles, spiral angle, spiral length, clearance angle, cutting angle etc. can be measured. Movement X axis 310 mm, movement Y axis 290 mm, movement Z-axis 640 mm, A axis 60 rpm., workholding adaption ISO 50, workpiece dia. 300 mm max., max. workpiece length 500 mm, max. workpiece weight 25 kg, repeating accuracy dia. measuring + /- 0,002 mm, repeating accuracy length measuring + /- 0,002 mm, resolution for all linear axis 0,002 mm, resolution for rotational A axis 0,0025, weight approx kg, dimensions w x d x h 1765 x 1400 x 1957 mm, connected load 230 V / 50 Hz / 2 kw, colour light grey RAL Software Vialogic (teach in Mode), Software package 1 (cylindrical tools sharp edge, corner and full radius), Software package 2 (conical spiral tools sharp edge, corner and full radius), Software package 3 ((Walter Window Mode drills and step drills), Software Vialogic Viascan, software Vialogic Viafit, Sofdtware Quickcheck Turbo Precision glass scales on the linear axis. page 14 from 36

15 Circular knife grinding machine Article M01013 Machine - Made by: Reform Model: RM 40 CNC Year: 2001 Category: Other equipment Suitable for automatic grinding of slitter knives (foil knives, pinch knives, punching knives, textile knives etc.) as well as other tools and machine parts. Workpiece taper MK5, max. grinding dia. 40 to 400 mm, max workpiece weight 80 kg, workpiece spindle speed left / right 10 to 650 rpm, Y axis travel 400 mm, Height adjustment 110 mm, pivot of grinding spindle + / - 10, X axis travel 400 mm, angle adjustment workhead 120, grinding spindle speed workhead 1500 to 5000 rpm, grinding device travel 680 mm, grinding wheel diameter max. 200 mm, Connected load approx. 7 kw (400 volts / 50 Hz), weight approx kg, dimensions w x d x h = 3000 x 2000 x 2200 mm, colour light grey / blue RAL 5000/7035. Total enclosure, Pneumatic workpiece clamping, Electronic hand wheel, Bandfilter system 400 L, Extractor UL 8, 3 grinding wheel mounts, Stepless speed control. Automatic TCT Circular Sawblade Grinding Machine Article M01066 Machine - Made by: UTMA Model: AL 805 Year: 2011 Category: TCT circular saw blade processing Suitable to sharpen automatically the face and top on carbide tipped circular saw blades. All known geometries (triple chip, alternate flat etc.) can be done in one pass. Sawblade diameter from mm, blade thickness up to 10 mm, clearance angle from -15 to 130, tooth pitch up to 130 mm, top bevel angle up to 45, pivot angle on the face 0-10, grinding wheel diameter 125 x 32 mm, power rating grinding motor, 0,75 kw, connected load approx 400 V / 50 Hz / 3,2 kw, weight approx. 900 kg, dimensions w x d x h 1650 x 1500 x 1800 mm, colour grey. Coolant system, 2 saw blade mounts, 1 set of centerring rings, 1 mounting bolt, Extractor. page 15 from 36

16 TCT circular saw blade sharpening machine (CNC controlled) Article M01109 Machine - Made by: Walter Model: Woodtronic C 5 Year: 2007 Category: TCT circular saw blade processing Suitable to sharpen automatically the face and top on carbide tipped circular saw blades in one set-up. The software enables free programming of special tooth forms in any sequence required. Saw dia mm, saw blade centre bore dia. from 10 mm upwards, tooth pitch mm, breast angle (rake angle) -25 to +30, back clearance angle 0 to 25, max. grinding wheel dia. 160 mm, grinding wheel centre bore dia. 32 mm, grinding spindle drive 1.1 kw (3000 rpm.), connected load approx. 4,5 kva (400 volts / 50 Hz), weight approx kg, dimensions w x d x h = 1771 x 1568 x 2250 mm, colour grey RAL 7035 / grey RAL Total enclosure with coolant system, Manual axis angle pivot device, Probe, Machine light, Software package W1 (alternate tooth), Software package P2 (flat tooth), Software package P3 (Trapezoid / flat tooth), Software package P4 (flat top tooth), Software package P5 (trapezoid tooth), Software package P6 (top bevel), Software package P7 (chamfered alternate tooth), Software package P8 free programming), 1 grinding wheel mount electrostatic air cleaner page 16 from 36

17 TCT circular saw blade sharpening machine (CNC controlled) Article M00768 Machine - Made by: Vollmer Model: CHD 251 R2 Year: 2005 Category: TCT circular saw blade processing Suitable to sharpen automatically the face and top on carbide tipped circular saw blades in one set-up. Permits to sharpen all known tooth geometries (flat tooth, alternate tooth, triple chip flat tooth, etc.) automatically and in one rotation. Saw dia. with robot system mm, saw dia. without robot system mm, saw blade centre bore dia. with robot system mm, saw blade centre bore dia. without robot system mm, saw thickness with robot system up to 5 mm, saw thickness without robot system up to 14 mm, tooth pitch with robot system 8-50 mm, tooth pitch without robot system mm, rake angle -35 to +40, clearance angle 5 to 45, top bevel grinding up to 45, face bevel grinding up to 30, grinding wheel dimensions max. 200 x 32 mm, dimensions machine w x d x h = 2295 x 1743 x 2050 mm, weight approx kg, connected load 5.6 kw (400 volts / 50 cycles), colour blue RAL 5014 /grey RAL Total enclosure, Coolant system, Hard and software package for oscillation grinding on toothface and top, Saw blade positioning device, Alpha-numerical keyboard for data administration at the control panel, Preparation for robot system, Controlled mounting slide, Automatic central lubrication, Stepless grinding spindle speed, Grinding wheel compenation device. page 17 from 36

18 TCT circular saw blade sharpening machine (CNC controlled) Article M01104 Machine - Made by: Walter Model: Woodtronic CNC 5 Year: 2001 Category: TCT circular saw blade processing Suitable to sharpen automatically the face and top on carbide tipped circular saw blades in one set-up. The software enables free programming of special tooth shapes at any sequence you want. Saw dia mm, saw blade centre bore dia. from 10 mm upwards, saw body thickness up to 12 mm, tooth pitch mm, breast angle (rake angle) -40 to +45, back clearance angle 1 to 40, max. grinding wheel dia. 200 mm, grinding wheel centre bore dia. 32 mm, connected load approx. 12 kva (400 volts / 50 Hz), weight approx kg, dimensions w x d x h = 1760 x 1560 x 2275 mm, colour grey RAL 7035 / grey RAL total enclosure, automatic front door, electro-static coolant fog and mist separator, automatic fire extinguishing system, oil collecting pan, automatic central lubrication, probe, machine light, coolant system, 2 grinding wheel flanges. page 18 from 36

19 TCT circular saw blade sharpening machine (CNC controlled) Article M01129 Machine - Made by: Walter Model: Woodtronic CNC 5 Year: 1999 Category: TCT circular saw blade processing Suitable to automatically grind the face and top on carbide tipped circular saw blades in one set-up. The software enables free programming of special tooth shapes in any sequence required. Saw dia mm, saw blade centre bore dia. from 10 mm upwards, saw body thickness up to 12 mm, tooth pitch mm, breast angle (rake angle) -40 to +45, back clearance angle 1 to 40, max. grinding wheel dia. 200 mm, grinding wheel centre bore dia. 32 mm, grinding spindle drive 1.1 kw (3000 rpm.), coolant pump output 60 l/min. at 3 bar, coolant tank capacity approx. 150 l, connected load approx. 12 kw (400 volts / 50 cycles), weight approx kg, dimensions w x d x h = 1760 x 1560 x 2275 mm, colour grey RAL 7035 / grey RAL pallet loader, Coolant system with total enclosure, Software package W 1 alternate tooth, Software package W 2 flat tooth, Software package W 3 triple chip flat tooth (with tooth height difference), Software package W 4 flat / serrated tooth (with tooth height difference), Software package W 5 triple chip tooth, Software package W 6 single sided point, Software package W 8 free programming of special tooth forms, Software package W 12 Braunschweiger toothform, Software package W 13 Hollowface tooth, Hollowface grinding device, Extractor, Probe, Automatic tool positioning axis, Automatic door, Automatic central lubrication, Machine light, Oil collecting pan, 3 loading pallets, 2 loading wagons for loader, Positioning laser for loader. page 19 from 36

20 TCT Sawblade Grinding Machine Article M00658 Machine - Made by: Vollmer Model: CHM 22 H Year: 1985 Category: TCT circular saw blade processing Suitable for automatic grinding of tooth geometries on the face and top of TCT circular sawblades. Sawblade diameter from 200 mm to 2200 mm, sawblade centrebore from mm, sawblade thickness up to 20 mm, tooth pitch from 12 mm,rake angle -30 to +45, clearance angle from 5 45, bevel angle on top to 45, b on negative rake angle to 30, tooth height difference to max. 8 mm, grinding length max.20 mm, grinding wheel diameter 25 x 32 mm, connected load 3 kw (400V / 50 Hz), dimensions w x d x h = 2100 x 1050 x 1970 mm, weight approx kg, colour green RAL Coolant System motorised clearance and rake angle adjustment Machine lamp 4 centering rings 1 sawblade mount 1 grinding wheel mount. page 20 from 36

21 2 axis-nc controlled Universal tool and cutter grinder Article M01119 Machine - Made by: SchneebergerModel: Aries Year: 1998 Category: Universal tool and cutter grinders Suitable for regrinding of spiral fluted or straight flutet tools and flat grinding via preinstalled standard grinding programs. X-axis: 360 mm stroke, work piece spindle A-Axis MK5, Y-axis 250 mm stroke (manual), Z-axis 300 mm stroke (manual), spindle speed step-less adjustable rpm., wheel dia. max. 200 mm, performance grinding motor 2.2 kw, connected load 2,2 kw (400 volts / 50 Hz), weight approx kg, dimensions w x d x h = 1395 x 1565 x 1990 mm, colour turquoise/grey. Glass measuring scales on the linear axes X and Z, Stepless adjustable grinding spindle speed, Probe PSM 118, Manual central lubrication, Coolant system, 8 Workpiece mounting mandrels, 6 grinding wheel mount, 1 grinding wheel protection cover, Machine lamp, Concentricity probe. page 21 from 36

22 5 Axis Universal tool and cutter grinder (CNC controlled) Article ENP5 Machine - Made by: SchneebergerModel: Aries ENP5 Year: 2011 Category: Universal tool and cutter grinders Suitable for automatic grinding and production of wood and metalworking tools of all kinds. X axis lateral movement 380 mm, Y Axis cross movement 280 mm, Z axis vertical movement 280 mm, C axis swing area 340, A axis rotation 360, centre height 210 mm, workpiece mount ISO 50, Max. grinding wheel diameter 200 mm, Grinding spindle rating 7.5 kw, Grinding spindle speed stepless U / min., connected load 29 kw (400 V / 50 Hz), dimensions W x D x H 1590 x 1930 x 2550 mm, weight approx kg, Colour Green / Grey. Quinto Software for cylindrical tools sharp edge, corner and full radius Quinto Software for conical tools sharp edge, corner and full radius, Quinto Software for drills and step drills, Quinto software dxq for profile tools Quinto software for e - grinding, Quinto software woodworking tools Hydraulic workpiece clamping, 3D coordination probe MRG 218 CNC handwheel A 860 Automatic central lubrication Steady rest Option: Band filter unit Electrostatic air cleaner page 22 from 36

23 5 Axis Universal tool and cutter grinder (CNC controlled) Article i160 Machine - Made by: Schneeber Model: Corvus gds Year: 2003 Category: Universal tool and cutter grinders Suitable for automatic grinding and production of wood and metalworking tools of all kinds. X axis lateral movement 400 mm, Y Axis cross movement 300 mm, Z axis vertical movement 300 mm, C axis swing area 210, A axis rotation infinite, centre height 210 mm, workpiece mount ISO 50, Max. grinding wheel diameter 250 mm, grinding spindle power 9 KW, Grinding spindle speed stepless rpm., connected load 20 kva (400 V / 50 Hz), dimensions w x d x h = ca x 2500 x 2300 mm, weight approx kg, colour turquoise, light and dark grey. Quinto software 4.2 Quinto software conical tools die sinking, ball shaped head Quinto software for drills & step drills Quinto software for profile tools Quinto software for prism end mills Quinto software grinding wheel design Probe Automatic central lubrication, Band filter page 23 from 36

24 6 Axis CNC Tool Grinding Machine with Erosion Functionality. Article M01068 Machine - Made by: Ewag Model: Ewamatic Line Year: 2001 Category: Universal tool and cutter grinders Suitable for production and regrinding of inserts and rotational symmetrical tools made from HSS, TCT, Cermet, Ceramic, CBN and PCD. Cross axis X 360 mm, height adjustment axis Y 240 mm, infeed axis Z 240 mm, fast traverse X, Y, Z 10 m / min, pivot axis B +/- 120, max tilt of grinding spindle -15 to +25, workpiece mount HSK 63, workpiece diameter from 0,2-200 mm, inserts from diameter 3 mm inner circle to 50 mm outer circle, grinding spindle power rating 7,5 kw, grinding spindle speeds rpm // rpm, grinding wheel diameter max. 300 mm, connected load 400 V / 50 Hz / approx. 16 kva, dimensions w x d x h approx x 2750 x 2250 mm, colour stainless steel. Accessories (to be confirmed): Grinding head tiltable with 6 spindle ends, Linear axis X, Y and Z with glass measuring scales, Indexing head TA60, with automatic clamping for SK 40 Clamping table complete, Pressure control for PCD grinding, Measuring station, Integrated dressing and regeneration systems, Acoustic monitoring system option "touch", Coolant system 350 l, Mist extractor, Automatic central lubrication, Probe, Automatic steady rest, Automatic fire extinguishing system, 4 grinding wheel mounts, 1 erosion wheel mount, Various collets W25, NUMROTOplus Single-User-license, NUMROTOplus - standard endmills, NUMROTOplus - complex endmills, NUMROTOplus - standard drills / step drills, NUMROTOplus - complex drills / step drills, NUMROTOplus - form cutters, NUMROTO-3D - Collision monitoring, NUMROTO-3D - workpiece simulation, Hard lock for additional programming station. page 24 from 36

25 PCD Grinding Machine (CNC controlled) Article M01103 Machine - Made by: Coborn Model: RG 5B Year: 2005 Category: Universal tool and cutter grinders Suitable for production and regrinding of PCD tools of all kinds. Cross table surface area 260 x 130 mm, cross slide traverse 40 mm, radius adjustment max. 35 mm, conical clearance angle 0-25, cylindrical clearance angle 0-25, pivot range 200, stroke speed 0,1-50 mm/sec, oscillation stroke max. 300 mm, max steps per tool 25, resolution X and Y axis 1 µm, programmable pivot adjustment, power rating grinding spindle 2,2 kw, grinding spindle speed stepless from 200 to 4000 rpm, connected load 415 / 50 Hz, dimensions w x d x h = approx x 1270 x 1860 mm, weight approx. 770 kg, colour grey / white. Stepless speed control of grinding spindle rpm, Grinding wheel speed and direction setting on display (15"), Automatic central lubrication, Air blast to clean tool, Automatic pivoting device, Audio touch probe, Support trestle, Workpiece holder, VS3 Video Camera System, HF 2 Helical grinding device, Band filter unit, Cylindrical grinding device, Various clamping equipment, Machine lamp. page 25 from 36

26 Rotational erosion and Universal tool and cutter grinder (CNC controlled) Article M01048 Machine - Made by: Walter Model: Helitronic Power Diamond Year: 2007 Category: Universal tool and cutter grinders Suitable for manufacturing and regrinding of PCD tools for the wood- and metalworking industry and for manufacturing and regrinding of wood- and metalworking tools. Control HMC 600; Working range: longitudinal traverse (X-axis) 470 mm, vertical traverse (Y-axis) 320 mm, cross traverse (Z-axis) 660 mm, rotary table swivelling range (C-axis) +/- 200, work head spindle ISO 50, centre height (with / without worktable) 145 / 190 mm, max. diameter of workpiece 320 mm, max length of workpiece peripheral grinding 350 mm, max workpiece length face grinding 280 mm, peak performance 11, 5 kw, grinding wheel speed rpm, connected load 25 kw (400 V / 50 Hz), grinding spindle speed rpm., weight ca kg, dimensions w x d x h = 2427 x 2930 x 2273 mm, colour grey RAL 7011/RAL SW Toolstudio standard and advanced version 2.0 with option free programming of the grinding path, SW package 1 (cylindrical cutters), SW package 2 (tapered helical cutters), SW package 3 (drills, step drills), SW package 7 (profiles), SW package 15 (pocket seats), SW package 16 (warm up program), SW package 17 (cylindrical grinding), SW package 18 (dressing), SW package 32 (contours with option cylindrical grinding), SW package 51 and 52 (rotary eroding), SW package 53 (cylindrical eroding), SW package 55 (PCD sawblades), SW package 63 (erosion of standard drill as well as chip flute and top), SW Heliflute & cone, SW Helidrill, Hollowshaft motor, Automatic fire extinguishing system, Automatic central lubrication, Stepless adjustable grinding spindle speed, Oil collecting pan, 1 erosion wheel adapter, 2 grinding wheel flanges. page 26 from 36

27 Universal tool and cutter grinder Article M01115 Machine - Made by: Walter Model: Mini Power Year: 1998 Category: Universal tool and cutter grinders Suitable for manufacturing and regrinding wood- and metalworking tools of all kinds. Working range: longitudinal traverse (X-axis) 350 mm, vertical traverse (Y-axis) 200 mm, cross traverse (Z-axis) 470 mm, rotary table swivelling range (C-axis) +/- 200, work head spindle ISO 50, centre height (with / without worktable) 130 / 160 mm, max. diameter of workpiece 100 mm, max length of workpiece 270 mm, max. dia. of wheel 150 mm, grinding spindle power 9 kw, connected load approx. (400 volts / 50 Hz / 25 KVA), weight approx kg, dimensions w x d x h = 1808 x 2716 x 2393 mm, colour grey RAL 7035 / Automatic loader for cylindrical tools from 1-12,7 mm diameter, Software Toolstudio Standard & Advanced V 2.1, Toolstudio Option Drills, Toolstudio Option calibration w/ Touch Probe, Toolstudio Option Step Tools, Toolstudio Option Flexprog operation, Software package 1 (cylindrical cutters), Software package 2 (tapered helical cutters), Software package 3 (drills), Software package 4 (step drills), Software package 5 (discoid tools), Software package 6 (woodworking Tools), Software package 7 (profiles), Software package 16 (warmup), Software package 27 (flexible programming), Software Heliflute & Cone, Probe, Electrostatic mist extractor, Automatic fire extinguishing system, Pneumatic workpiece clamping, Automatic central lubrication, Machine lamp, Bandfilter system 350 l, Oil collecting pan, 2 grinding wheel flanges. page 27 from 36

28 Universal Tool and Cutter grinder (CNC -Controlled) Article M01110 Machine - Made by: Walter Model: Helitronic Basic Year: 2007 Category: Universal tool and cutter grinders Suitable to regrind and manufacture wood and metal working tools of all kinds. Working range: longitudinal traverse (X- axis) 460 mm, vertical traverse (Y-axis) 320 mm, cross traverse (Z-axis) 660 mm, rotary table swivelling range (C-axis) +/- 200, work head spindle ISO 50, max. diameter of workpiece 320 mm, max. length of workpiece for peripheral grinding 350 mm, max. dia. of grinding wheel 200 mm, peak performance 7 kw, grinding spindle speed rpm., connected load approx. 20 kw (400 volts / 50 Hz), weight approx kg, dimensions w x d x h = 2570 x 2930 x 2280 mm, colour grey RAL 7011 / white RAL Software package 1 (cylindrical cutters), Software package 2 (tapered helical cutters), Software package 3 (drills and step drills), Software package 4 (step tools), software package 5 (discoid tools) Softwarepackage 7 (profile tools) Software package 16 (warm-up), Software package 25 (compression routers) Stepless grinding spindle speed Automatic central lubrication, Probe, Band filter unit 400 l with coolant pump, Electrostatic Mist extractor, oil collecting pan, 2 grinding wheel flanges. page 28 from 36

29 Universal tool and cutter grinder (CNC controlled) Article Norma 75 Machine - Made by: SchneebergerModel: Norma 75 Year: 1998 Category: Universal tool and cutter grinders Suitable to regrind and manufacture wood and metal working tools of all kinds. X axis lateral movement 360 mm, Y Axis cross movement 250 mm, Z axis vertical movement 250 mm, C axis swing area 340 workpiece mount ISO 50, Max. grinding wheel diameter 200 mm, Grinding spindle rating 4 kw, Grinding spindle speed stepless U / min., connected load 10kW (400 V / 50 Hz), dimensions W x D x H 1470 x 2450 x 2165 mm, weight approx kg, colour Green / Grey RAL Quinto Software V 2.4 Action Manager Quinto Software for milling cutters sharp edge, radius Quinto Software for die-sinking cutters Quinto Software for shell-end mill Quinto Software for discoid milling cutters Quinto software for drills and step drills Quinto Software for tapered spiral tools Quinto Software for axis angle tools Quinto Software for wood working drills Quinto Software for Up/Down milling cutters Quinto Software for Iso spiral, Iso axis angle Probe Coolant system Dust exhausting unit CNC hand wheel A860 Hydraulic workpiece clamping Automatic central lubrication 2 grinding wheel flanges page 29 from 36

30 Universal tool and cutter grinder (CNC controlled) Article MiniPower_2005Machine - Made by: Walter Model: Helitronic Mini Power Year: 2005 Category: Universal tool and cutter grinders Suitable to regrind and manufacture wood and metal working tools of all kinds. Control HMC 600 (5 axis); Working range: longitudinal traverse (X-axis) 350 mm, vertical traverse (Y-axis) 200 mm, cross traverse (Z-axis) 470 mm, rotary table swivelling range (C-axis) +/- 200, work head spindle ISO 50, centre height (with / without worktable) 130 / 160 mm, max. diameter of workpiece 100 mm, max length of workpiece 270 mm, max. dia. of wheel 150 mm, grinding spindle power 7 kw, connected load approx. (400 volts / 50 Hz / 25 KVA), weight approx kg, dimensions w x d x h = 1808 x 2716 x 2393 mm, colour grey RAL 7035 / Software package 1 (cylindrical cutters), Software package 2 (tapered helical cutters), Software package 3 (drills and step drills), Software package 4 (step tools), Software package 16 (warmup program), Software package Helidrill, Automatic central lubrication, Bandfilter system 350 L, Pneumatic workpiece clamping, Probe, Oil collecting pan, 2 grinding wheel flanges. page 30 from 36

31 Universal tool and cutter grinder (CNC controlled) Article Vision Machine - Made by: Walter Model: Helitronic Vision Year: 2009 Category: Universal tool and cutter grinders Suitable to manufacture and regrind metal and woodworking tools of all kinds. Working range: longitudinal traverse (X- axis) 480 mm, vertical traverse (Y-axis) 320 mm, cross traverse (Z-axis) 700 mm, rotary table swivelling range (C-axis) +/- 200, work head spindle ISO 50, max. diameter of workpiece 320 mm, max. length of workpiece for peripheral grinding 370 mm, max. length of workpiece for face grinding 300 mm, max. length of workpiece for peripheral grinding 370 mm; Precision in linear resolution mm, in radial resolution ; max. dia. wheel 200 mm, peak performance grinding spindle 30 kw, grinding spindle speed rpm. Connected load approx. 35 kw (400 volts / 50 Hz), weight approx kg, dimensions w x d x h = 3649 x 2490 x 2301 mm, colour grey RAL 9003 / Lift Loader for cylindrical tools 3-32 mm, Cylindrical grinding is possible with /min 12 sided wheel changer 12 workpiece pallets (Ø 10, 12, 14, 16, 18, 20, 25, 32 mm), Toolstudio 2.1 Standard and Advanced versio 2.1 (Bugfix), Software Package 1 (cylindrical mills) Software Package 2 (tapered mills) Software Package 3 (drills) Software Package 7 (profiles) Software Package 16 (warmup program) Software Package 17 (cylindrical grinding) Software Package 27 (flexible programming) Software Package 32 (contours with cylindrical grinding) Software Heliflute & cone (flute calculation software) Prepared for hydraulic steady rest glass scales in all linear axis X, Y, Z Probe, 3 grinding wheel mounts page 31 from 36

32 Universal tool and cutter grinder (CNC controlled) Article Vision2005 Machine - Made by: Walter Model: Helitronic Vision Year: 2005 Category: Universal tool and cutter grinders Suitable for grinding and manufacturing of tools of all kinds. Working range: longitudinal traverse (X- axis) 480 mm, vertical traverse (Y-axis) 320 mm, cross traverse (Z-axis) 700 mm, rotary table swivelling range (C-axis) +/- 200, work head spindle ISO 50, max. diameter of workpiece 320 mm, max. length of workpiece for peripheral grinding 370 mm, max. length of workpiece for face grinding 300 mm, max. length of workpiece for peripheral grinding 370 mm; Precision in linear resolution mm, in radial resolution ; max. dia. wheel 200 mm, peak performance grinding spindle 30 kw, grinding spindle speed rpm. Connected load approx. 35 kw (400 volts / 50 Hz), weight approx kg, dimensions w x d x h = 3734 x 2490 x 2301 mm, colour grey RAL 7035 / Lift Loader for cylindrical tools 3-32 mm Cylindrical grinding is possible with /min Toolstudio 2.1 Standard and Advanced version 1.9, Software Package 1 (cylindrical mills) Software Package 2 (tapered mills) Software Package 3 (drills) Software Package 16 (warmup program) Software Package 17 (cylindrical grinding) Software Heliflute & cone (flute calculation software) Software Helidrill (flute calculation software) Automatic fire extinguisher Probe glass scales in all linear axis X, Y, Z 2 grinding wheel mounts page 32 from 36

33 Universal tool and cutter grinder (CNC controlled) Article MiniPower1999Machine - Made by: Walter Model: Helitronic Mini Power Production Year: 1999 Category: Universal tool and cutter grinders Suitable for manufacturing and regrinding wood- and metalworking tools of all kinds. Working range: longitudinal traverse (X-axis) 350 mm, vertical traverse (Y-axis) 200 mm, cross traverse (Z-axis) 470 mm, rotary table swivelling range (C-axis) +/- 200, work head spindle ISO 50, centre height (with / without worktable) 130 / 160 mm, max. Diameter of workpiece 100 mm, max length of workpiece 270 mm, max. dia. of wheel 150 mm, grinding spindle power 9 kw, connected load approx. (400 volts / 50 Hz / 25 KVA), weight approx kg, dimensions w x d x h = 1808 x 2716 x 2393 mm, colour grey RAL 7035 / Software package 1 (cylindrical cutters), Software package 2 (tapered helical cutters), Software package 3 (drills and step drills), Software package 6 (woodworking tools), Software package 16 (warm up program) Heliflute & Cone (flute calculation software) Production loader Probe, Oil collecting pan, Glass scales on the linear axes, Automatic fire extinguishing unit, Automatic central lubrication, Pneumatic workpiece clamping, 2 grinding wheel flanges. page 33 from 36

34 Universal tool and cutter grinder (CNC controlled) Article MiniPower2000Machine - Made by: Walter Model: Helitronic Mini Power Production Year: 2000 Category: Universal tool and cutter grinders Suitable for manufacturing and regrinding wood- and metalworking tools of all kinds. Working range: longitudinal traverse (X-axis) 350 mm, vertical traverse (Y-axis) 200 mm, cross traverse (Z-axis) 470 mm, rotary table swivelling range (C-axis) +/- 200, work head spindle ISO 50, centre height (with / without worktable) 130 / 160 mm, max. Diameter of workpiece 100 mm, max length of workpiece 270 mm, max. dia. of wheel 150 mm, grinding spindle power 9 kw, connected load approx. (400 volts / 50 Hz / 25 KVA), weight approx kg, dimensions w x d x h = 1808 x 2716 x 2393 mm, colour grey RAL 7035 / Software package 1 (cylindrical cutters), Software package 2 (tapered helical cutters), Software package 3 (drills and step drills), Software package 6 (woodworking tools), Software package 16 (warm up program) Heliflute & Cone (flute calculation software) Production loader Probe, Oil collecting pan, Glass scales on the linear axes, Automatic fire extinguishing unit, Automatic central lubrication, Pneumatic workpiece clamping, 2 grinding wheel flanges. page 34 from 36

35 Universal tool and cutter grinder (CNC controlled) Article MiniPower2003Machine - Made by: Walter Model: Helitronic Mini Power Production Year: 2003 Category: Universal tool and cutter grinders Suitable for manufacturing and regrinding wood- and metalworking tools of all kinds. Working range: longitudinal traverse (X-axis) 350 mm, vertical traverse (Y-axis) 200 mm, cross traverse (Z-axis) 470 mm, rotary table swivelling range (C-axis) +/- 200, work head spindle ISO 50, centre height (with / without worktable) 130 / 160 mm, max. Diameter of workpiece 100 mm, max length of workpiece 270 mm, max. dia. of wheel 150 mm, grinding spindle power 9 kw, connected load approx. (400 volts / 50 Hz / 25 KVA), weight approx kg, dimensions w x d x h = 1808 x 2716 x 2393 mm, colour grey RAL 7035 / Software package 1 (cylindrical cutters), Software package 2 (tapered helical cutters), Software package 3 (drills and step drills), Software package 6 (woodworking tools), Software package 16 (warm up program) Heliflute & Cone (flute calculation software) Production loader Probe, Oil collecting pan, Glass scales on the linear axes, Automatic fire extinguishing unit, Automatic central lubrication, Pneumatic workpiece clamping, 2 grinding wheel flanges. page 35 from 36

36 Universal Tool and Cutter Grinding Machine Article 620XS Machine - Made by: Rollomatic Model: 620 XS Year: 2006 Category: Universal tool and cutter grinders Suitable for regrinding and production of wood and metalworking tools of all kinds. Fanuc 160iMB control system (Windows XP), diameter range mm, X-axis: 320 mm, Y-axis 220 mm, Z-axis 180 mm, resolution: mm, travel speed 12 m/min, linear glass measuring scales, grinding spindle 7 kw, spindle speed U/min, grinding wheel diameter 150mm, connected load 18 kw (400 V / 50 Hz), dimensions w x d x h 2160 x 1600 x 2151 mm, weight 3200 kg, colour blue RAL 5002 / white RAL Software VGPRO newest software from May 2016 CNC upgrade in 2012 Interface FANUC/PC with OS Windows XP Software package VG Virtual Grind, Software package Flutecalc (flute and relief calculation program for cylindrical end mills and twist drills), Software package 3DCalc (3D Simulation of processed workpieces Exportable with STEP file to SolidWorks or ProEngineer), Software package Tapercalc, (flute and relief grinding calculation program for conical workpieces Software package Burcalc (calculation software for burrs) Software package 3DGMS for grinding simulation in 3D Software package ISOEasy for tool programming in ISO code with PC Simulation Software package Zoller interface, Pallet loader, Automatic steady rest, Glass measuring scales on the linear axes, Stepless speed control, Automatic fire extinguishing system, Probe Renishaw 620X CNC 620 Machine lamp, 2 grinding wheel mounts. page 36 from 36