National Guard Products, Inc.

Transcription

1 GAKETING PRODUCT National Guard Products, Inc. COPYRIGHT

2 National Guard Products, Inc. Gasketing Product Index Phone: Fax: ymbols/legend Index Adhesive G12-G14 Adjustable G28-G29 Allseal Premium G25 Automatic Door Bottoms G30-G34 Astragals G42-G48 Bronze G27,G49 Concealed Fastener G24, G34, G39, G44 Door Aligning Astragals G51 Door Closer Compatible G22,G23 Drip trips G49 Edge ealing ystems G8-G12 Fast Attach Tape (FATT) G14 Fasteners G55 Finger Guard G50 Foam Perimeter G19 Glass Door G41 ymbols/legend E Interlocking Intumescent Kerf Magnetic Mullion Neoprene Perimeter Nylon Brush Perimeter Overhead Door Pile Perimeter Polyurethane Perimeter ilicone Perimeter hoes weeps tainless teel Vinyl Perimeter G45 G8-G11, G25 G13, G19 G44, G49 G11 G16, G17 G20, G21 G41 G15 G17 G18, G19 G35-G37 G38-G40 G26 G15 POITIVE PREURE CLAIFIED by UL to ANI/UL; complies with IBC, NFPA 80 and NFPA 252 for application to teel fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes. (Ratings on some items vary and are noted.) CLAIFIED by UL to ANI/UL10B and CAN/ULC-104; complies with NFPA 80 and NFPA 252 for application to teel fire doors rated up to 3 Hrs., and Wood fire doors rated up to 90 minutes. (Rating on some items vary and are noted.) NGP-EDGE EALING YTEM, Classifed by UL to ANI/UL Category G ; required for Category B wood fire doors to meet positive pressure requirements complying with IBC, and NFPA 252. ee individual products for maximum door size and ratings. MOKE & DRAFT CONTROL GAKETING, Classified by UL to ANI/UL Category H ; complies with IBC, UL1784 and NFPA 105 for use on labeled Positive Pressure teel fire doors rated up to 3 hours, and wood fire doors rated up to 90 minutes. (Ratings on some items vary and are noted.) MRA E-coli ACOUTICAL TETED to ATM E90 tandard Test Method for Laboratory Measurement of Airborne ound Transmission Loss of Building Partitions and Elements, and ATM E1408 tandard Test Method for Laboratory Measurement of the ound Transmission Loss of Door Panels and Door ystems. Refer to chart on page G5 for test result data. AIR INFILTRATION TETED to ATM E283, tandard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors. ANTI-MICROBIAL Proven to be up to 99% effective at killing a wide range of bacteria including MRA and E-coli. Independent laboratory tested to meet IO 22196:2011. ANI/BHMA CERTIFIED. Certified gasketing complies with American National tandard for Door Gasketing and Edge eal ystems ANI/BHMA A , and is listed in the BHMA Certified Products Directory. Online product listings: H 7 G 2 NGP, Inc. 2014

3 GAKETING Numerical Index 5V G35 6V G35 12V G35 13V G35 14R G41 15N G G G G49 17BR G27 18V G35 19V G35 26N G36 35V G37 35EV G37 36V G37 36EV G37 43CB G49 43B G49 44B G49 45B G49 50B G49 54CP G11 95WH G36 96V G39 97V G39, 43 98V G G35 100V G39 101V G39 102V G39 103N G28 104N G28 105N G G G28 108N G16 109N G G26 110N G G18 112N G36 113N G G45 115N G42 116N G41, N G36 119N G36 120N G16 120BR G G G G43, N G G26 123N G43, G45 125N G42 125BR G G G18 127N G G26 129N G17 129U G17 129BR G G26 130N G16 130BR G G G26 131N G16 132N G16 133N G16 134N G G18 135N G17 136N, G41, P G47 137N G17, G19, A G46 139BR G27, P G G26, P G G G G G48 148N G45 149M G44 150U G G47 152V G G19 154P G37 155V G G G19 156V G15 157M G G45 159M G G19 160U G17 160V G15 161N G17 161P G G19 161U G17 161V G G19 164V G15 165N G G G G G G45 PF G14 PF G14 184Q G19 185P G15 189M G44 190V G15 191V G24 197N G G38 199N G G38 200BR G G26 201N G38 202N G38 203N G G G30 221BR G G G G G30 229BR G30 254P G37 284Q G19 303N G29 304N G29 305N G G30 312V G37 313V G37 318V G37 319V G37 319EV G G G32 336P G48 339F G11 340P G G G14 420N G31 421N G31 422N G33 423N G33 520N G31 522N G G21, 40, G21, G G20 A G21, 40, 43 B G21, 40, 43 C G21, 40 D G21, 40 G G21, 40 G G21 H G21, 40 H G21 I G21 I G21 A G G36 C G20 D G20 G G20 H G20 I G20 A G20 F G20 A G20 C G40 OV G21, 40 OV G21, 40 A G47 D G21 A G41 A G G G G24, 39, G G G24, 39, G G G G G G23 700E G22 701E G22 701P G23 703V G23 703E G22 704V G23 704E G22 705V G23 705E G G23 706E G G R G V G N G P G R G G G G N G G G G G G G G G G G G G G G G18, G18, G25, G25, BR G G G G x G x G G G25, 40, G25, 40, G25, 40, 42, G E G E G G G G N G41 FATT G14 Metal Edges and Astragals - ee Lite and Louver Catalog Numerical Index NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 3 3

4 National Guard Products, Inc. Phone: Fax: Materials and Finishes Materials Metal retainers for gasketing are Aluminum Alloy 6063, T5 temper, unless noted. Architectural Bronze gasketing is Alloy CDA 385 (Copper Alloy No. C38500), Architectural Bronze. tainless steel gasketing is Type 304; known for its excellent corrosion resistance, high tensile strength and resistance to oxidation. NGP utilizes a variety of gasketing materials including Vinyl, Neoprene, ilicone, Nylon Brush, Thermo- Plastic Elastomers (TPE), Polypropylene Pile, Ethylene-Propylene-Diene-Monomer (EPDM), Polyurethane, and Intumescent Fire eals. Product Illustrations indicate the Gasketing material. Properties of many primary gasket materials are listed on the perimeter seal catalog pages. Adhesive mounted gasketing utilizes a pressure sensitive modified acrylic adhesive protected by a release liner. Once installed it provides a permanent bond in exterior or interior locations. End use temperature range is 0 F up to 190 F. helf life of adhesive prior to installation is one year when stored at 75 F and 50% relative humidity or less. Gasketing Finishes NGP uffix: Aluminum: Mill Finish ANI/BHMA 719 None Clear Anodized ANI/BHMA 628 A Dark Bronze DKB Gold B Polished ANI/BHMA 717 POL Powder Coated Colors ee Page L2 for details Architectural Bronze: atin Finish ANI/BHMA 728 BR Dark Bronze Oil Rubbed ANI/BHMA 722 BR-DKB Polished ANI/BHMA 721 BR-POL tainless teel: Brushed (#4) ANI/BHMA 630 None Gasket Materials: Neoprene is Black N Polyurethane is Black U Vinyl is Gray, except where noted as Black V ilicone colors: Black, Brown, Clear, Gray, Tan, White Nylon Brush colors: Black, Gray, Tan TPE colors: Brown, Charcoal, Clear, White Polypropylene Pile is Gray EPDM is Gray Powder Coat Finish Powder Coat finish is standard on Metal Edges and Astragals and is available on most metal gasketing retainers upon request. Refer to page L2 for standard color options. Consult factory for custom color matching. G 4

5 GAKETING ound Transmission Class (TC) Rated Door Assemblies Acoustical testing to ATM E90 tandard Test Method for Measurement of Airborne ound Transmission Loss of Building Partitions and Elements and ATM E1408 tandard Test Method for Laboratory Measurement of the ound Transmission Loss of Door Panels and Door ystems. The sound transmission class (TC) was calculated in accordance with ATM E413 Classification for Rating ound Insulation. 897N x 420N TC Rating TC Rating tatic Door Operable Perimeter eals Door Bottom Threshold Panel Door w/ Gasket N, 107N, 120N, 420N 897N 127N, 133N, 134N, 137N, 303N, 700N, , , 9750, , N, 107N, 303N 420N 897N (2) N N, 133N,134N 420N 897N 137N, 700N, N, 3038N 423N (2) 5050 Mortise 312V (2) N N 335N NF 422N 897N (2) N (2) N N, 134N 420N 897N M 420N 897N (2) N NF 422N N, 131N, 420N 897N 1038N, 3038N Acoustical Gasketing Indicates 2 rows of 5050 installed as follows: Acoustical Gasketing The chart above indicates the TC rating of specially made acoustic doors using various applications of gasketing. The first column is the rating of the door panel only; tested in a static inoperable condition to determine the sound transmission through the door. The second column is the rating of the operable door installed with hardware and gasketing which provides the TC rating of the door assembly. TANDARD without special acoustic core - solid core wood doors with gasketing test to an TC rating of approx. 28 to 30. Mineral core wood doors and Honey comb core hollow metal doors with gasketing test to an TC rating of approx. 32 to 36. Without gasketing these doors have no sound control and test to an TC rating between 15 and 20. To most effectively reduce sound transmission around the perimeter and maximize the acoustic performance we recommend the following be used: 107 Perimeter eal 700 eal at head if a parallel arm closer is used 220 Automatic Door Bottom Any Threshold - To allow proper sealing of Automatic Door Bottom NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 5 5

6 National Guard Products, Inc. Phone: Fax: BUY AMERICAN LEED ANI/BHMA ANI/BHMA The following interprets ANI/BHMA numbers which identify type and function of products. For products that meet ANI/BHMA tandards, look for the BHMA certified logo next to the product in our catalog. For a complete listing refer to the BHMA Certified Products Directory, available online at ANI/BHMA A (2012) American National tandard for Door Gasketing and Edge eal ystems 1 Product ection R designates Gasketing 2 Retainer Material 1. Brass or Bronze 3. Aluminum 5. tainless teel 0. Optional material or none used 3 Gasketing Material A. Brush B. Neoprene, solid C. Neoprene, closed cell D. Vinyl E. ilicone Rubber F. Pile G.Thermoplastic Elastomer (TPE) H.Thermoplastic Urethane (TPU) J. Thermoplastic Rubber K. pring Metal L. Magnetic M. Felt N. Rubber Fabric P. Intumescent Q. Intumescent/Brush LEED Green Building 4 Product Type 1. Head & Jamb 2. Head & Jamb, Adjustable 3. Automatic Door Bottom 4. Door weep or hoe 5. Door weep or hoe with Drip Cap 6. Astragal Overlapping 7. Astragal plit or Compensating 8. Astragal Adjustable 9. Rain Drip without gasket 0. Other 5 Material Application 1. Door Edge 2. Door Edge, Mortise 3. Door Face 4. Door Face, emi-mortise 5. Frame Rabbet (surface or mortise) 6. Frame offit (H.M.) Frame top (WD) 7. Frame Face 8. Kerf 9. top (H.M.), top Face (WD) 0. Other 6 Gasketing Rating 0. moke/energy Performance/ Acoustic Rated 1. moke/energy Performance rated. 2. moke/acoustic Rated 3. Energy Performance/ Acoustic Rated 4. moke Rated 5. Energy performance Rated 6. Items not rated. 7. Acoustic Rated The LEED (Leadership in Energy and Environmental Design) Green Building Rating ystem is a national standard for developing high-performance, sustainable buildings developed by the U.. Green Building Council. Our products contain the following percentages of recycled materials qualifying for LEED MR Credit 4; Recycled content: Post Consumer Pre-Consumer Recycled % Recycled % Gasketing with Aluminum or Bronze Retainers 56% 0% Gasketing with tainless teel Retainers 68% 0% elf Adhesive Gasketing 0% 0% Contact us for a current letter containing LEED qualification information for all our products. Buy American Act R. Intumescent /Neoprene, solid. Intumescent /Neoprene, closed cell T. Intumescent/ Vinyl U. Intumescent / ilicone Rubber V. Intumescent/ Pile W. Intumescent / Thermoplastic Elastomer (TPE) X. Intumescent / Thermoplastic Urethane (TPU) Y. Optional material or none used Z Intumescent / Thermoplastic Rubber Over 99% of our products are produced in the United tates as a domestic construction material, as defined in the Buy American Act (BAA) of March 1933 and amended by the Buy American Act of 1988; and additionally qualify as manufactured products produced in the United tates as manufactured goods, as defined in OMB Guidance ( ; (a) (2) (ii); , complying with the Federal American Recovery Reinvestment Act, ARRA Contact us for a BAA or ARRA certificate for your project. G 6

7 GAKETING The International Building Code (IBC) The International Building Code (IBC) requires swinging fire doors to be tested in accordance with NFPA 252 or UL, with the neutral pressure level established at 40 inches or less above the sill. This causes positive pressure forces against the door assembly above 40 inches. The result is hot gases and smoke leak out between the door and frame above this level, posing a serious threat to life-safety; and on wood doors rapidly deteriorating the integrity of the door edges, requiring either a built-in or supplemental edge sealing system to pass the test. Fire door assemblies in corridors and smoke barrier walls are required to be smoke and draft control assemblies tested in accord with UL1784 allowing a maximum air leakage of 3 cubic feet per minute per square foot of door opening at ambient temperature (75 F) and elevated temperature (400 F). These assemblies require the letter on the fire rating label of the door indicating compliance when listed or labeled gasketing is also installed. Fire doors are classified into category A or B based upon their construction and edge sealing system requirements. Fire-rated gasketing is classified as follows: E Category G - Edge ealing ystems Category H - moke and Draft Control Gasketing Category J - Gaskets other than Category G or H. International Building Code (IBC) Category A classified fire doors: Hollow Metal Fire-Rated Doors Wood Fire-Rated Doors constructed with edge seals built-in during the manufacturing process. Require Category H moke and Draft Control Gasketing at perimeter and at meeting edge of pairs of label doors in corridor locations or smoke barrier walls. Require Category H moke and Draft Control door bottom eals on label doors where pressurization is provided to restrict smoke movement (typically controlled by HVAC system). The following are some recommended products UL listed Category H for wood doors - 90 min. max., steel doors - 3 hour max. Perimeter: 2525, 5020, 5025, 5040, 5050, 5060, 5075 Meeting edges: 115N, 125N, 137N, 137, 5070, 9115, 9125, 9600, 9605 Category B classified fire doors: Wood Fire-Rated Doors that require the addition of a Category G classified edge sealing system in the field. Require Category G Edge ealing ystem, at perimeter and at meeting edge of Pairs. Require Category H moke and Draft Control Gasketing at perimeter and at meeting edge of pairs of label doors in corridor locations or smoke barrier walls. Require Category H moke and Draft Control door bottom seals on label doors where pressurization is provided to restrict smoke movement (typically controlled by HVAC system). The following are some recommended products UL listed for both category G and H: E Perimeter 20 minute: 5050 Perimeter 45, 60, 90 minute: 9450, 9550, 9750, 9850 E Meeting edge 20, 45, 60, 90 minute: 9550 NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 7 7

8 National Guard Products, Inc. Phone: Fax: NGP-Edge ealing ystems / moke & Draft Control Gasketing Combination NGP-Edge ealing ystem/moke and Draft Control Gasketing - Category G and H Classified 11/16" 9450B 9450C 9450W FRAME TOP FRAME TOP Brown Charcoal White 1 9/16" 9550 Gray 9550DKB Brown HEAD& LATCH JAMB HINGE JAMB 9450 Intumescent with TPE Fin Fire and moke eal E 20, 45, 60, 90 Minute rated category B wood doors perimeter application up to: single swing 4 0 x 9 0 standard pair 8 0 x 9 0 use 9550 at the meeting edge 1/8 clearance required between door and frame Available in 36, 48, 84, 96 and 108 lengths elf-adhesive ee adhesive specifications on page G NGP-Edge Intumescent with TPE Fins Fire and moke eal E 20, 45, 60, 90 minute rated category B wood doors up to: single swing 4 0 x 9 0, perimeter application pairs 8 0 x 9 0, perimeter/meeting edge 1/8 clearance required between doors and between door & frame Available in 36, 48, 84, 96 and 108 lengths elf-adhesive ee adhesive specifications on page G12 MRA MRA E-coli E-coli G 8

9 GAKETING Combination NGP-Edge ealing ystem/moke and Draft Control Gasketing - Category G and H Classified 9750, 9850 Intumescent with TPE Fire and moke eal E 20, 45, 60, 90 Minute rated category B wood doors perimeter application up to: single swing 4 0 x 9 0 pairs 8 0 x 9 0 1/8 clearance required between door and frame elf-adhesive ee adhesive specifications on page G x 2525 or 9500 x 5020 NGP-Edge Intumescent Fire eal x moke eal E 20, 45, 60, 90 Minute rated category B wood doors perimeter application up to: single swing 4 0 x 9 0 pairs 8 0 x 9 0 1/8 clearance required between door and frame elf-adhesive ee adhesive specifications on page G12 MRA E-coli 9850B Brown 9850C Charcoal 9850W White Available in 36, 48, 84, 96 and 108 lengths 9750B Brown 9750C Charcoal 9750W White Available in 36, 48, 84, 96 and 108 lengths intumescent 1 9/16" 5/64" 9500DKB x 2525B Brown 9500 x 2525B Gray x Brown 9500 x 2525W Gray x White Available, in 36, 48, 84, 96 and 108 lengths NGP-Edge ealing ystems/moke & Draft Control Gasketing intumescent 1 9/16" 5/64" 9500DKB x 5020B Brown 9500 x 5020B Gray x Brown Available in 36, 48, and 108 lengths MRA E-coli NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 9

10 National Guard Products, Inc. Phone: Fax: NGP-Edge ealing ystems NGP-Edge ealing ystems - Category G Classified NGP Intumescent materials are formulated to expand at 375 F to 400 F up to 8-10 times their original thickness; completely sealing the gap around and between doors during a fire. elf-adhesive 1/16" 9800B 9800C 9800W Brown Charcoal White Intumescent with Protective kin Available in 17, 21 and 150 rolls ee adhesive specifications on page G12 MRA E-coli 9800 Intumescent Fire eal Perimeter Application: E 20, 45, 60, 90 Minute rated category B wood doors up to single swing 4 0 x 9 0 pairs 8 0 x 9 0 Meeting Edge Application up to 8 0 x 9 0 pairs of category B wood doors: E 20 Minute rated with single strip installed E 45, 60 Minute rated with two strips installed 9500 NGP-Edge Intumescent Fire eal E 20, 45, 60, 90 minute rated category B wood doors up to: single swing 4 0 x 9 0, perimeter application pairs 8 0 x 9 0, perimeter/meeting edge U.. Pat. DE 417, /16" 9500 Gray 9500DKB Brown 5/64" 1/8 clearance required between doors and between door and frame Intumescent with PVC cover Available in 36, 48, 84, 96 and 108 lengths elf-adhesive ee adhesive specifications on page G12 MRA E-coli 5/64" 1 9/16" G 10

11 GAKETING eal for Mullion Applications 5100N Neoprene (black) 5100 ilicone (gray) Closed cell sponge strip 1-1/8" wide x 3/32" thick with an adhesive strip for mounting directly to the face of the mullion that doors close against. Available in 86" and 96" lengths elf-adhesive Mullion 1 1/8" ee adhesive specifications on page G12 Intumescent Door weep Retain Fire Rating on 20 Minute Wood Doors With Undercut up to 1 1/4 UL Positive Pressure classified for 20 minute wood doors with up to 1 1/4 undercut. UL10B classified for 20 minute wood doors with up to 1 1/4 undercut. Available in 36" and 48" lengths 3/32" Door Door Corner Pad Helps acoustics and seals corner gap for air leakage control. Apply to jamb on hinge side, opposite bottom corner of door edge. 54CP Black polypropylene pile elf Adhesive 339FA 339FDKB 2" intumescent 3/8" 1 Mullion eal / Corner Pad Intumescent weep A - clear DKB - dark bronze is black NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 11

12 National Guard Products, Inc. Phone: Fax: ilicone moke & Draft Control Gasketing elf-adhesive ilicone Gasketing TOP TOP TOP HEAD & LATCH JAMB HEAD& LATCH JAMB HINGE JAMB 3/8" 5050B Brown 5050C Charcoal 5050W White 5050T Tan 5050CL Clear 2525B 2525C 2525W 2525T Brown Charcoal White Tan ilicone Bulb Fire and moke eal E Edge ealing ystem - Category G for 20 minute rated category B wood doors perimeter application up to: single swing 4 0 x 8 0 pairs 8 0 x 8 0 use 9550 at the meeting edge of pairs moke and Draft Control - Category H Up to 3 hours steel fire doors Up to 90 minutes wood fire doors Meets requirements of ROH Directive 2002/95/EC Available in 17, 20, 21, 25 and 300 rolls. ilicone Bulb moke eal Available in 17, 20, 21, 25 and 300 rolls. ilicone Fin moke eal Available in 17, 20, 25, 300 rolls TOP HINGE JAMB 5040B 5040W Brown White TOP HEAD& LATCH JAMB ilicone Fin moke eal Available in 17 and 21 rolls. TOP 5060B Brown 5060CL Clear HINGE JAMB Adhesive specifications: Modified acrylic pressure sensitive adhesive protected by release liner. Provides high initial adhesion and long term holding power for permanent mounting in exterior or interior locations. Resistant to aging, weathering, UV radiation, water, detergent, alcohol and the influence of chemicals. End use temperature range, long term exposure 0 F up to 190 F; short term exposure 0 F up to 400 F. helf life of adhesive prior to installation is one year when stored at 75 F and 50% relative humidity or less. G 12

13 GAKETING elf-adhesive TPE Gasketing Properties: Thermo-Plastic Elastomers (TPE) Rigid PVC base with flexible elastomeric fins Good abrasion resistance Flame resistant Moisture resistant Temperature range -60 F to 275 F BHMA certified to ANI/BHMA A performance tests for heat, cold, air infiltration and smoke infiltration Adhesive specifications shown on page G12 TOP TOP TOP TOP HEAD& LATCH JAMB HINGE JAMB HEAD& LATCH JAMB HINGE JAMB TPE Batwing moke eal 5020B Brown 5020C Charcoal 5020W White 5020CL Clear TPE Double Batwing moke eal Available in 36, 48, 72, 84, 96 and 108 lengths Great for hospitality use, superior sealing characteristics against smoke, air & sound 5025B Brown 5025C Charcoal * 5025W White 5025CL Clear Available in 36, 48, 72, 84, 96 and 108 lengths MRA MRA E-coli E-coli * TPE moke and Draft Control Gasketing TPE Double hark Fin moke eal moke rated for perimeter and/or meeting edge (Astragal) applications 5070B Brown 5070W White 5070CL Clear MRA E-coli Available in 36, 48, 72, 84, 96 and 108 lengths * TOP TOP HEAD& LATCH JAMB HINGE JAMB 3/8" TPE Triple Fin moke eal 5075CL Clear 5075B Brown 5075W White * Available in 36, 48, 72, 84, 96 and 108 lengths MRA E-coli TOP TOP HEAD& LATCH JAMB HINGE JAMB 11/32" TPE Batwing moke eal (Kerf Press-in) 5021B Brown 5021C Charcoal 5021W White Fits Kerf 1/8 wide x 7/16 deep Available in 36, 48, 84, 96 and 108 lengths MRA E-coli * Anti-microbial not available in clear MRA E-coli NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 13

14 National Guard Products, Inc. Phone: Fax: FATT Fast Attach Tape elf-adhesive Gasketing elf-adhesive Gasketing Adhesive bonds for permanent mounting once installed helf life of adhesive products prior to installation is one year JAMB JAMB JAMB JAMB HEAD & LATCH IDE HINGE IDE LATCH IDE HINGE IDE LATCH IDE HINGE IDE 3/8" FATT Fast Attach Two-Way Tape Rigid Black Vinyl eal PF180 * * Available in 36, 48, 86, 96 & 120 lengths Q-lon Foam eal PF183 Brown polyethylene liner, foam core * * Fast attach two way tape provides an easy and effective alternative to gasketing installation. Two way tape is applied to the metal housing insuring a quick and easy installation. Then for security, 3 tek-type self drilling screws are provided to further secure each piece of material to the frame stop. A no problem installation with no holes to drill. up to 3 hours metal doors, 60 minute wood doors * up to 3 hours metal doors, 60 minute wood doors * Available in 36, 48, 86, 96 & 120 lengths Neoprene ponge eal width thickness rolls 3/8 x 3/ rolls 1/2 x 1/4 To order add suffix FATT to product number. ee price list for products available with this feature. FATT I NOT CLAIFIED FOR UE ON FIRE. G 14

15 GAKETING Vinyl eals Properties Thermoplastic polymer: Poly Chloride (PVC) Economical Flame resistant Moisture resistant Temperature range 0 F to 140 F Oxidative degradation from age and exposure to Cold, Heat and UV causes hardening, loss of memory and resilience, cracking, crazing and discoloration #6 x 3/4 tainless teel heet Metal crews furnished crew holes slotted for adjustment 152V 152VA 152VB 152VDKB 160V 160VA 160VB 160VDKB 164V 164VA 164VB 164VDKB Polypropylene Pile eals Temperature range 32 F to 275 F 155V 155VB 155VDKB 161VA 161VDKB 190V 190VA 190VB 190VDKB 7/32".07 aluminum for military specs 156V 156VDKB All seals this section A - clear B - gold DKB - dark bronze no suffix - mill Vinyl is gray (exception: is black) Vinyl Perimeter eals Pile eals 185P 185PA 185PB 185PDKB Gray pile 161PA 161PDKB Gray pile.07 aluminum for military specs NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 15 15

16 National Guard Products, Inc. Phone: Fax: Neoprene Perimeter eals Neoprene ponge eals Properties: ynthetic rubber polymer blend: Nitrile rubber (NBR), PVC and Polychloroprene Very good abrasion resistance, tensile strength and memory Flame resistant Moisture resistant Temperature range -20 F to 200 F Good resistance to ozone, sunlight and aging. BHMA Certified to ANI/BHMA A performance tests for Heat, Cold, Air Infiltration and moke Infiltration #6 x 3/4 tainless teel heet Metal crews furnished. crew holes slotted for adjustment Closed Cell ponge All products this page A - clear B - gold DKB - dark bronze is black 11/16" 1 108NA 108NB 108NDKB 110NA 110NB 110NDKB 120NA 120NB 120NDKB 1 122NA 122NB 122NDKB 127NA 127NB 127NDKB 130NA 130NB 130NDKB 3/8" 131NA 131NB 131NDKB 132NA 132NB 132NDKB 133NA 133NB 133NDKB 1/8" 1 13/32" 134NA 134NB 134NDKB 165NA 165NDKB G 16

17 GAKETING Neoprene Bulb eals Properties: ynthetic rubber polymer blend: Polychloroprene and EPDM Very good abrasion resistance, tensile strength and memory Flame resistant Moisture resistant Temperature range -20 F to 200 F Good resistance to ozone, sunlight and aging. BHMA Certified to ANI/BHMA A performance tests for Heat, Cold, Air Infiltration and moke Infiltration #6 x 3/4 tainless teel heet Metal crews furnished crew holes slotted for adjustment Polyurethane eals Properties: Very good abrasion resistance, tensile strength, memory and UV resistance. Flame resistant Moisture resistant Temperature range -65 F to 175 F #6 x 3/4 tainless teel heet Metal crews furnished crew holes slotted for adjustment All polyurethane seals this section 129NA 129NB 129NDKB 137NA 137NB 137NDKB 129UA 129UB 129UDKB polyurethane Dense Bulbs 135N 135NA 135NB 135NDKB 161NA 161NDKB All seals this section.07 aluminum for military specs 160U 160UA 160UB 160UDKB polyurethane Neoprene Perimeter eals Polyurethane Perimeter eals A - clear B - gold DKB - dark bronze no suffix - mill is black polyurethane is black 150UA 150UB 150UDKB 161UA 161UDKB polyurethane.07 aluminum for military specs NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 17 17

18 National Guard Products, Inc. Phone: Fax: ilicone Perimeter eals ilicone eals Properties: ynthetic rubber polymer: Polysiloxane Excellent flexibility and memory Flame resistant Moisture resistant Temperature range -100 F to 500 F, remains flexible at extreme temperatures Excellent resistance to ozone, UV and aging. Recommended for areas using FM200 or Halon Fire uppression ystems BHMA Certified to ANI/BHMA A performance tests for Heat, Cold, Air Infiltration and moke Infiltration #6 x 3/4 tainless teel heet Metal crews furnished. crew holes slotted for adjustment Closed Cell ponge All products this page A - clear B - gold DKB - dark bronze no suffix - mill sponge is gray 3/16 110A 110B 110DKB 120A 120B 120DKB 130A 130B 130DKB 1 13/32" 134A 134B 134DKB 127A 127B 127DKB 165A 165DKB ilicone Plus pecially formulated to withstand greater temperature extremes while providing maximum protection against air infiltration. ilicone Plus gasket material is tan A 9001B 9001DKB A 9002B 9002DKB G 18

19 GAKETING ilicone eals Properties: ynthetic rubber polymer: Polysiloxane Excellent flexibility and memory Flame resistant Moisture resistant Temperature range -100 F to 500 F, remains flexible at extreme temperatures Excellent resistance to ozone, UV and aging. Recommended for areas using FM200 or Halon Fire uppression ystems BHMA Certified to ANI/BHMA A performance tests for Heat, Cold, Air Infiltration and moke Infiltration #6 x 3/4 tainless teel heet Metal crews furnished crew holes slotted for adjustment 137A 137B 137DKB A 160B 160DKB Q-Lon Foam eals A 152B 152DKB Brown polyethylene liner with foam core " 9/16" Dense Bulbs 161A 161DKB B 155DKB.07 aluminum for military specs Kerf Application Fits 1/8 wide x 7/16 deep kerf 7/32" All seals this section A 162B 162DKB A - clear B - gold DKB - dark bronze no suffix - mill dense is black (exception: 137 is gray) DKB ilicone Perimeter eals Foam eals 184QA 184QB 184QDKB 284Q tock lengths: 36, 48, 96, 120 NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 19 19

20 National Guard Products, Inc. Phone: Fax: Nylon Brush eals Nylon Brush eals Properties: ynthetic polymer: Polyamide Excellent abrasion resistance, flexibility and memory Moisture resistant Retains insecticides well Temperature range -70 F to 425 F BHMA Certified to ANI/BHMA A performance tests for Heat, Cold, Air Infiltration and moke Infiltration in most common profiles as indicated by BHMA Certified symbol. Not effective against water penetration #6 x 3/4 tainless teel heet Metal crews furnished. crew holes slotted for adjustment. A - clear with gray brush B - gold with black brush DKB - dark bronze with black brush no suffix - mill with gray brush A626A A626B A626DKB A625A A625B A625DKB 603A 603DKB 602A 602DKB A617A A617DKB F625A F625B F625DKB 1 1/8" 45 O 1 1/8" 1 1/8" 4".45 O 2 1 9/16" C619A C619DKB D620A D620B D620DKB * * * G622A H623A G622DKB H623DKB * * I-624A I-624DKB * * * * up to 3 hours metal doors, 1 hour wood doors. G 20

21 GAKETING A 600B 600DKB A 601B 601DKB A605A A605B A605DKB B606A B606B B606DKB 9/16" C607A C607B C607DKB #6 x 3/4 tainless teel heet Metal crews furnished. crew holes slotted for adjustment. Nylon Brush eals 5 D648 D648 D648DKB 3/8" 1 3/8" 5 OV633A OV633B OV633DKB OV634A OV634B OV634DKB 1 3/8" 1 3/8" 4" 4" 1 1/16" D608A D608B D608DKB G610A G610B G610DKB H612A H612B H612DKB I-615A I-615B I-615DKB G611A G611DKB H614A H614DKB I-616A I-616DKB NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 21 21

22 National Guard Products, Inc. Phone: Fax: Perimeter eals Compatible with Parallel Arm Closers Perimeter eals Compatible with Parallel Arm Closers 700EN 700ENDKB 700E 700EDKB 701EP 701EPDKB No break in seal Head not drilled Jamb sections furnished with slotted holes for adjustment elf drilling #8 (Tek type) screws furnished Closer and/or overhead holder attach to frame through weatherseal section. Install Gasket First Allows mounting of rim exit device strikes without notching gasketing 700EU 700EUDKB 703EV 703EVDKB 705EV 705EVDKB A - clear B - gold DKB - dark bronze no suffix - mill & pile are gray,, & polyurethane are black, + is tan 1 1 polyurethane 1 706E - gray brush 706EDKB - black brush 1 704EV 704EVDKB 9700E 9700EDKB tan E - gray brush 9706EDKB - black brush G 22

23 GAKETING Perimeter eals Compatible with Parallel Arm Closers Profiles on this page may be cut to fit narrow frame stops at additional charge. pecify cut to width on order A 700B 700DKB 701P 701PA 701PB 701PDKB 704V 704VA 704VB 704VDKB 700N 700NA 700NB 700NDKB 700U 700UA 700UB 700UDKB 703V 703VA 703VB 703VDKB 1 1 polyurethane Perimeter eals Compatible with Parallel Arm Closers 705V 705VA 705VB 705VDKB 706A - gray brush 706B 706DKB - black brush nylon brush A 9700B 9700DKB + NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 23 23

24 National Guard Products, Inc. Phone: Fax: Concealed Fastener eals Concealed Fastener eals nap-on cover conceals screw heads for cleaner appearance #6 x 3/4 tainless teel heet Metal crews furnished. crew holes slotted for adjustment 170VA 170VB 170VDKB* 170NA 170NB 170NDKB 170A 170B 170DKB A -clear B - gold DKB - dark bronze & pile are gray * is black & are black nylon brush is gray with clear anodized metal; black with gold and DKB metal 170PA 170PB 170PDKB 670A 670B 670DKB 675A 675B 675DKB nylon brush 11/16" 1/8" 11/16" 1/8" 11/16" 1/8" 172VA 172VB 172VDKB 172NA 172NB 172NDKB 172A 172B 172DKB 11/16" 11/16" 672A 672B 672DKB nylon brush 191VA 191VDKB cap G 24

25 GAKETING Allseal Gasketing pecially formulated to withstand greater temperature extremes while providing maximum protection against air infiltration. Color of + is tan, nylon+ brush is gray with mill and clear anodized, black with gold and DKB. Perimeter eals All products this page A - clear B - gold DKB - dark bronze no suffix - mill #6 x 3/4 tainless teel heet Metal crews furnished. crew holes slotted for adjustment Perimeter eals or weeps Allseal Gasketing 9001A 9001B 9001DKB A 9002B 9002DKB 9000A 9000B 9000DKB nylon + + brush nylon A 9600B 9600DKB nylon+ 9605A 9605B 9605DKB Astragal eals 3/8" A 9115B 9115DKB A 9600B 9600DKB nylon A 9125B 9125DKB nylon+ 9605A 9605B 9605DKB 9675A 9675B 9675DKB nylon + NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 25 25

26 National Guard Products, Inc. Phone: Fax: tainless teel eals tainless teel Perimeter eals 1 " 1/8" 120N N " 1/8" All perimeter seals this section ( Exception: 129U not moke rated) 1 " 129N 129U polyurethane " 1 3/8" #6 X 3/4 stainless steel M furnished. crew holes slotted for adjustment. 130N N Drip trip Astragal eals 3/8" N 2 Door weep 200N 200U polyurethane #10 x 3/4 M furnished Available lead lined.030 thick lead- suffix LD 1 " 3/8" 125N epdm tainless steel brushed #4 (U32D, 630) Neoprene & polyurethane are black, epdm & are gray, + is tan G 26

27 GAKETING Architectural Bronze Perimeter eals 120NBR 120BR 129NBR 1 1/8" Astragal eals epdm 125NBR order as set to receive two pieces Architectural Bronze eals 129UBR polyurethane + epdm 130NBR 130BR BR order as set to receive two pieces Door weep 2" 1/8" 200NBR 200BR 1 139BR Available lead lined.030 thick lead - suffix LD 200UBR polyurethane Rain Drip Guard 9/16" 17BR 1 & polyurethane are black & EPDM are gray + is tan Architectural bronze satin finish (728), similar to U4 Optional finishes: Polished (721), suffix POL Dark Oxidized oil rubbed (722) similar to U10B, suffix DKB NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 27 27

28 National Guard Products, Inc. Phone: Fax: Adjustable Perimeter eals Adjustable Perimeter eals Adjustment screws on 10 centers allow adjustment without re-positioning mounting location. #6 x 3/4 or #6 x 1 1/2 tainless teel M furnished 1 Adjusting Range 1 103NA 103NB 103NDKB Option: Foam back seal - suffix F 104NA 104NB 104NDKB 9/16" A - clear B - gold DKB - dark bronze Neoprene & 106 are black 107 is gray 1 1/8" Adjusting Range 3/8" 1 9/16" Adjusting Range for cased opening frame 1 1/16" 106NA 106NB 106NDKB 106A 106B 106DKB 105NA 105NB 105NDKB Adjusting Range 1 1 Adjusting Range 107NA 107NB 107NDKB 107A 107B 107DKB Option: Foam back seal - suffix F 1038NA 1038NB 1038NDKB 1 G 28

29 GAKETING pring Adjustable Perimeter eals Adjustment screws on 10 centers allow adjustment without re-positioning mounting location. pring-loaded to maintain pressure for the most effective seal #6 x 3/4 or #6 x 1 1/2 tainless heet Metal crews furnished 141NA 141NB 141NDKB 141A 141B 141DKB 9/16" 1 1/16" Adjusting Range 1 pile 141PA 141PB 141PDKB pring Loaded 9/16" 9/16" A - clear B - gold DKB - dark bronze & are black pile is gray 1 1/8" 1 1/16" Adjusting Range 3/8" pring Adjustable Perimeter eals NA 303NB 303NDKB 304NA 304NB 304NDKB 1 9/16" for cased opening frame Adjusting Range 1 1/8" 3/8" 1 Adjusting Range 1 305NA 305NB 305NDKB NA 3038NB 3038NDKB NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 29 29

30 National Guard Products, Inc. Phone: Fax: Automatic Door Bottoms - urface Automatic Door Bottoms - urface Use with a threshold for maximum sealing capability Nylon brush recommended for carpet applications where no threshold is provided pecify the exact net length required to avoid field sizing. Automatic Door Bottoms 36 and longer may be cut up to 4 in the field, under 36 should not be cut in the field, order net length Minimum length 11, maximum length 60 (except 780) End caps available - please specify. For 220, 221, 229, 310 end caps provide door handing (1, 2) 220NA 220NB 220NDKB (1, 2) 220A 220B 220DKB 19/32" 2 (1) 222NA 222NB 222NDKB (1) 222A 222B 222DKB 11/16" 2 3/32" (1, 2) 310NA 310NB 310NDKB (1, 2) 310A 310B 310DKB All products this page 19/32" & are gray is black brush is gray with mill finish and stainless steel; black with gold, DKB and brass 2 1/16" nylon brush (2) 220WHA 220WHB 220WHDKB Max. Drop nylon brush 222WHA 222WHB 222WHDKB Max. Drop nylon brush (2) 310WHA 310WHB 310WHDKB Max. Drop Drop Bar with Nylon Brush - suffix WH limline Brass and tainless teel Endurance Tested to 5 Million Cycles Brass (1, 2) 221NBR (1, 2) 221BR 9/16" Brass or Brushed tainless Housing Brass (1, 2) 229NBR (1, 2) 229BR Brass or Brushed tainless Housing.035" 780A 780DKB 780VA 780VDKB nylon brush (2) 221WHBR tainless teel (1, 2) 221N (1, 2) nylon brush (2) 229WHBR tainless teel (1, 2) 229N (1, 2) Available 23 to 96 in length End caps furnished standard. Will work half mortised on swing or sliding doors! nylon brush (2) 221WH 1. Lead insert available for radiation shield - specify lead-lined 2. Door Bottom is handed. Right hand supplied unless specified. Field reversible. Max. Drop nylon brush (2) 229WH Max. Drop G 30

31 GAKETING Automatic Door Bottoms - Heavy Duty urface Use with a threshold for maximum sealing capability. Nylon brush recommended for carpet applications where no threshold is provided. pecify the exact net length required to avoid field sizing. Automatic Door Bottoms 36 and longer may be cut up to 4 in the field, under 36 should not be cut in the field, order net length. Minimum length 11, maximum length 60 End caps furnished standard (1, 2) 420NA 420NB 420NDKB 1 Max. Drop 2 (2) 520NA 520NB 520NDKB nylon brush (2) 680A 680B 680DKB All products this page 1 Max. Drop 2 Automatic Door Bottoms - urface E-Z Touch URFACE 2" Max.Drop The EZ-Touch door bottom requires only 3 to 5 pounds of pressure to activate. Perfect for accessibility applications and still provides an effective seal. Available 23 1/4 net to 48 in length. End caps available - please specify liding or Pocket Doors urface or Half Mortise - Heavy Duty 1 2 Designed for use on sliding or pocket doors. A series of actuating bars keep the seal parallel to the sill or threshold until the door is in the closed position. Available 11 to 144 in length. End caps not available (1) 421NA 421NB 421NDKB 223NA 223NB 223NDKB 223A 223B 223DKB Max. 1. Lead insert available for radiation shield - specify lead-lined. 2. For half mortise applications specify HM in item number prior to finish (ie: 420NHMDKB). NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 31 31

32 National Guard Products, Inc. Phone: Fax: Automatic Door Bottoms - Mortise Automatic Door Bottoms - Mortise Use with a threshold for maximum sealing capability Nylon brush recommended for carpet applications where no threshold is provided pecify the exact net length required to avoid field sizing. Automatic Door Bottoms 36 and longer may be cut up to 4 in the field, under 36 should not be cut in the field, order net length. End caps available - please specify 335N Mortise required x 1 9/16" 9/16" Adjusting crew 1 225N Mortise required x /16" All products this page 1 is black, nylon brush & are gray 335 Available 23 1/4 net to 48 in length Fits wood fire door mortise restrictions Hollow Metal Doors Max. Drop WH nylon brush 3/8" Max. Drop Available 11 to 60 in length Available with lead insert for radiation shield - specify lead-lined 1 Max.Drop 320N V 1/8" Fits in 1 5/8 x 3/4 channel. A furring strip may be used to lower automatic door bottom when a deeper channel is used. Furnished 1/2 shorter than ordered to fit within net door size. (i.e. 36 is furnished 35 1/2 ) Length may be field cut up to 4. Fire ratings apply to metal doors only. #4 x 5/8 M furnished Available 24 to 48 in length. G 32

33 GAKETING Automatic Door Bottoms - Heavy Duty Mortise Use with a threshold for maximum sealing capability Nylon brush recommended for carpet applications where no threshold is provided pecify the exact net length required to avoid field sizing. Automatic Door Bottoms 36 and longer may be cut up to 4 in the field, under 36 should not be cut in the field, order net length. Clear anodized end caps furnished standard. DKB end caps available - please specify 423N 1 Fits Wood Fire Door Mortise Restrictions Mortise required 1 x 1 Max. Drop Available 11 to 48 in length Available with lead insert for radiation shield - pecify lead-lined nylon brush Available 11 to 48 in length Mortise required 1 x 1 All products this section Max Drop is black nylon brush is gray #4 x 5/8 M furnished Automatic Door Bottoms - Heavy Duty Mortise Mortise required x 2 1/8" 1 Mortise required x 2 1/8" 1 All products this section Mortise required x 2 1/8" 1 * * 2" 2 " 2" *up to 3 hrs. metal doors, 45 minute wood doors (does not fit mortise restrictions of some wood door manufacturers) Max. Drop Max. Drop Max. Drop 422N Available 11 to 60 in length Available with lead insert for radiation shield - specify lead lined 522N Available 11 to 60 in length 682 nylon brush Available 11 to 60 in length NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 33 33

34 National Guard Products, Inc. Phone: Fax: Automatic Door Bottoms - Concealed Fasteners Dual Actuated (Hinge & Latch Edge) Automatic Door Bottoms WILL NOT FUNCTION ON PAIR OF - For pairs use matching single actuated door bottoms shown below Low compression & operating force Concealed fasteners urface 4440A 4440B 4440DKB nylon brush 4440WHA 4440WHB 4440WHDKB 1/2 maximum drop LATCH JAMB 1 FRAME TOP Furnished 1 3/8 shorter than ordered to fit between stops on frame. (i.e. 36 is furnished 34 5/8 ) #6x 3/4 TEK furnished 4440 Door Bottom Mortise 4447 nylon brush 4447WH HINGE JAMB FRAME TOP Available 24 to 96 in length. May be field cut up to 3. ingle Actuated Automatic Door Bottoms mortise required x 1 25/32" 1/2 maximum drop All products this page 1 5/32" Furnished 1/4 shorter than ordered to fit net door width. (i.e. 36 is furnished 35 3/4 net) #4 x 5/8 M furnished is gray gray brush with mill finish and clear anodized black brush with gold and DKB A- clear B - gold DKB - dark bronze no suffix - mill PATENTED Matches design of dual actuated door bottoms. For use on pairs of doors or field size for single doors Low compression & operating force! Concealed fasteners urface Mortise mortise required x 1 25/32" 4441A 4441B 4441DKB 1 1 5/32" nylon brush 4441WHA 4441WHB 4441WHDKB #6x 3/4 TEK furnished 1/2 maximum drop WH nylon brush HANDED - NOT FIELD REVERIBLE 1/2 maximum drop Available 24 to 96 in length. May be field cut up to 3. Furnished 1/4 shorter than ordered to fit net door size. (i.e. 36 is furnished 35 3/4 net) #4 x 5/8 M furnished G 34

35 GAKETING Extended Door hoes #6 x 3/4 tainless teel M furnished. 1 99NA 99NDKB All products this page 99NWHA 99NWHDKB & nylon brush Door hoes 3 99WHA 99WHDKB nylon brush 99VA 99VDKB 11/16" mooth Vinyl Door hoes #6 x 3/4 tainless teel heet Metal crews furnished. crew holes slotted for adjustment. 1 1 A - clear B - gold DKB - dark bronze no suffix - mill is gray is black Brush is gray with clear anodized metal; black with DKB metal 1 5VA 5VB 5VDKB 6VA 6VDKB 12V 12VDKB " 1 " 13VA 13VDKB 18V 18VDKB 19V 19VB 19VDKB NATIONAL GUARD PRODUCT, INC. Phone orders@ngpinc.com Fax quotes@ngpinc.com G 35 35