Bojo MRO Tool Systems

Transcription

1 Bojo MRO Tool Systems Additional Work Shop Tools. Unique Hi-Lok Sealant Application System and Hose assemblies for hard to reach areas. Unique Cargo Bay and Cabin Maintenance Tools. Wire Harness Handling Tools. Strong rib P/N AHS-60-XNGL All Composite Air Chisel Sealant Removal Tools. "Designed for Wide range of Small Scraper and Sealant Smoothing Tool profiles to increase work efficiency in narrow gaps. Example tool with Spring Retainer Style Shaft (Pneumatic Gun sold separately). Wide range of scraper widths and profiles to increase work efficiency.

2 Wing Tank Hand Scraper Tool List ATH-10-XNGL ATH-6-XNGL ATH-17-XNGL ATH-63-XNGL ATH-62-XNGL ATH-20-XNGL ATH-120-XNGL ANGLE BLADE SCRAPER: tool is used clean sealant with a cutting actions. GENERAL PURPOSE WEDGE: tool is used in areas of heavy duty sealant build up. CONCENTRATED SCRAPER: tool is used clean sealant around fasteners. 1/8"(3mm) NARROW SCRAPER: tool is used clean sealant in very narrow slots and locations. 1/4"(6.35mm) NARROW SCRAPER: tool is used clean sealant in very narrow slots and locations. NARROW FLAT SCRAPER: tool is used clean sealant in very tight areas. NARROW FLAT LEGACY SCRAPER: 13/16 ( (20.638mm)) wide ATH-8-XNGL ATH-24-XNGL ATH-11-XNGL PUSHING/PUSHING SCRAPER: tool is used clean sealant in areas not visible in a pull action. PUSHING/PUSHING SCRAPER: tool is used clean sealant in areas not visible in a pull action. 1-1/4"(31.75mm) WIDTH SCRAPER: tool is used to clean sealant in a durable, efficient manner. offers the most comprehensive range of sealant removal scraper tools in the world. the multiple scraper profiles allow improved efficency and reduced down time at the MRO facility. (Page 2)

3 Bojo MRO Sealant Scraper Tool Systems * Wing Tank Hand Scraper Tools * Wing Tank Micro Scraper Tool * Wing Tank Air Chisel Scrapers (Page 1)

4 Wing Tank Hand Micro Scraper Tool List MST XNGL MST XNGL MST XNGL MST XNGL MST XNGL MST XNGL MST-3KIT3-CEL HANDLE BLADE SCRAPER: tool is used to clean sealant with a cutting action. ANGLED BLADE SCRAPER: tool is used to clean sealant with a cutting action. CENTER BLADE SCRAPER: tool is used to clean sealant with a cutting action. HANDLE BLADE SCRAPER 2: tool is used to clean sealant with a cutting action. SHALLOW BLADE SCRAPER: tool is used to clean sealant with a shallow cutting action. WEDGE BLADE SCRAPER: tool is used to clean sealant with a wedge cutting action. THREE PIECE SCRAPER KIT: Includes three scraper tools in "CELCON" material in vinyl pouch SST XNGL SST XNGL SST XNGL SEALANT SMOOTHING TOOL: tool is used to clean and smooth sealant. SEALANT SMOOTHING TOOL: tool is used to clean and smooth sealant. SEALANT SMOOTHING TOOL: tool is used to clean and smooth sealant. now offer a comprehensive range of sealant removal small scraper tools to complement the scraper systems supplied for aerospace and general industrial applications. Industry standard profiles and unique Bojo designed tips ensure economical, consistent and aesthetic removal of all standard sealant types. (Page 3)

5 Wing Tank Air Chisel Scrapers AHS-62-XNGL AHS-8-XNGL NARROW SCRAPER: tool is used to clean sealant on narrow panels. STANDARD SCRAPER: tool is used to clean sealant on panels. AHS-11-XNGL AHS-61-XNGL AHS-60-XNGL STANDARD MEDIUM SCRAPER: tool is used to clean sealant on panels. Heavy duty body size. MEDIUM HEAVY DUTY SCRAPER: tool is used to clean sealant on Med panels. blade easily rehoned. WIDE HEAVY DUTY SCRAPER: tool is used to clean sealant on large panels. blade easily rehoned. Strong rib backing, easily resharpened. AHS-9-XNGL AHS-13-XNGL AHS-17-XNGL AHS-15-XNGL AHS-6-XNGL ANGLED BLADE SCRAPER: tool is used to clean sealant on delicate scraping requiring a low profile. TUBE SCRAPER: tool is used to clean sealant material from outside radiused surfaces. CONCENTRATED SCRAPER: tool is used to clean sealant around fasteners. RADIUS SCRAPER: tool is used to clean sealant material from inside radiuses surfaces. POWER WEDGE SCRAPER: tool is used to clean sealant material that is built up and thick. P/N AHS-60-XNGL "Designed for 0.401" Shank Pneumatic Guns Example tool with Spring Retainer Style Shaft (Pneumatic Gun sold separately). Designed to fit standard air chisel tools with a shank, this scraper system maintains the damage reduction and non-marring properties of our hand tools but is suited to heavy-duty and higher volume material removal while reducing operator fatigue. (Page 4)

6 Bojo MRO Ground Service Tool Systems *Wire Harness Handling Tools * Unique Cabin Overhaul Tools * Additional Work Shop Tools * Mech Assembly Work Shop Tools (Page 5)

7 Wire Harness Handling Tools ATH-30-UNGL WIRE FEED SPOON TOOL: tool is inserted into wire tie wraps to giude additional wires into bundle. ATH-35-UNGL WIRE INSERTION TOOL(Small Gauge): tool is used to insert and secure wires behind panels into bundle. ATH-22-UNGL WIRE INSERTION TOOL(Large Gauge): tool is used to insert and secure wires behind panels into bundle. ATH-36-XNGL WIRE PULLING TOOL: tool is used to pull and secure wires through panels and narrow spaces. ATH-4C-XNGL BREAKER SET TOOL: tool is used to pull/secure plane's breakers before/after MRO work. Wire Guide Tool (ATH-30-UNGL) Protects during cutting. Wire Stuffing Tool (ATH-35-UNGL) ATH-55-XNGL FUSE PULLER: tool is used for physical fuse removal to avoid damaging fuse body. Wire Pulling Tool (ATH-36-UNGL) Panel Opener Tool (ATH-26-UNGL) ATH-26-XNGL FUSE PANEL ACCESS TOOL: tool is used to remove panels and covers. ITH-CGW-24MM-XNGL* ITH-10MM-XNGL* WI XNGL* CABLE GLAND WRENCH TOOL: tool is used to loosen/tighten cable glands without marring. NON-CONDUCTING WRENCH TOOL: tool is used to remove nuts and battery connections safely. SOCKET REDUCER INSERTS: tool is used to reduce a standard socket while eliminating marring. Non-Conducting Wrenches (ITH-10MM-XNGL) *Additional Sizes at Cable Gland Wrench (ITH-CGW-24MM-XNGL) Widely used in high-end automotive and electronics production, have found many applications in cockpit avionics installation, cabling assembly, overhaul and engine system maintenance. preventing damage to cables and controls, the non-conducting tools assist in manipulation and precise placement of components. (Page 6)

8 Unique Cabin Overhaul Tools ATH-53-XNGL ATH-57-XNGL SEAT RAIL TRACK CLEAER: tool is used to clean seating tracks after seats are removed. PANEL RELEASE TOOL: tool is used to remove panels and covers ATH-54-XNGL AHS-61-XNGL AHS-60-XNGL ATH-56-XNGL ATH-29-XNGL CHANNEL CLEANING TOOL: tool is used to remove debris from channels. MEDIUM HEAVY DUTY CHISEL: tool is used to clean adhesives on large panels. WIDE HEAVY DUTY CHISEL: tool is used to clean adhesives on large panels. blade easily honed. PANEL ACCESS TOOL: tool is used to remove panels and covers to access screws MEDIUM SCRAPER TOOL: tool is used to help remove carpeting. ITH-12-XNGL LTF-1-UNGL LTF-2-UNGL WIDE SCRAPER TOOL: tool is used to help remove carpeting. LARGE FLAT PRY TOOL: tool is used to pry large panels, cargo door seals for repair. LARGE ANGLED PRY TOOL: tool is used to pry up composite floor panels. X (Page 7)

9 Additional Work Shop Tools ATH-1-XNGL ATH-2-XNGL ATH-9-XNGL ATH-13-XNGL ATH-15-XNGL ATH-20-XNGL ATH-20A-XNGL ATH-21-XNGL ITH-119-XNGL LTF-1-UNGL NARROW WEDGE TOOL: Tool for splitting soft plastic parts that are thin and fragile. WIDE WEDGE TOOL: Tool for splitting soft plastic parts that are thin and fragile. ANGLED BLADE SCRAPER: tool is used to clean sealant on delicate scraping requiring a low TUBE SCRAPER: tool is used to clean sealant material from outside radiuses surfaces. RADIUS SCRAPER: tool is used to clean sealant material from inside radiuses surfaces. NARROW FLAT SCRAPER: tool is used to wedge parts open in very tight areas. NARROW FLAT SCRAPER: tool is used to wedge parts open in very tight areas with hammer point. NARROW ANGLED SCRAPER: tool is used to wedge parts open in very tight areas. NARROW ANGLED PADDLE: tool is used to wedge parts open in very tight areas. LARGE FLAT PRY TOOL: tool is used to wedge parts open in very heavy duty conditions. now offer a comprehensive range of sealant removal small scraper tools to complement the scraper systems supplied for aerospace and general industrial applications. Industry standard profiles and unique Bojo designed tips ensure economical, consistent and aesthetic removal of all standard sealant types. (Page 8)

10 Mechanical Assembly Work Shop Tools ATH-19-XNGL ATH-6-XNGL ATH-4-XNGL MST XNGL MST XNGL ORT XNGL ORT XNGL SEALED PLATE PRY TOOL: Tool for any prying or splitting that requires some leverage. POWER WEDGE TOOL: Tool for any prying or splitting that requires some force. 90 DEGREE PRY TOOL: Tool for any prying or splitting in hard to reach locations. O-RING CHANNEL TOOL: Tool for cleaning O-Rings and seal channels. O-RING CHANNEL TOOL: Tool for cleaning O-Rings and seal channels. O-RING REMOVAL TOOL: Tool for removing O-Rings that are thin and fragile. O-RING REMOVAL TOOL: Tool for removing O-Rings that are thin and fragile. ORT XNGL SAT XNGL SAT XNGL O-RING REMOVAL TOOL: Tool for removing O-Rings that are thin and fragile. O-RING/SEAL APPLICATION TOOL: Tool for installing O-Rings that are thin and fragile. O-RING/SEAL APPLICATION TOOL: Tool for installing O-Rings that are thin and fragile. Critically machined mating surfaces are the most vulnerable to tooling damage. The avoidance of metal picks, scrapers and prys is vital if seal integrity and performance is to be maintained. Within our range of tools particularly suited to these applications, Bojo offers several narrow and sharp pry/scraper options manufactured in our strongest plastic composite material. (Page 9)