Tall Corner Media Console [1]

Transcription

1 [1] Submitted by Ana White [2] on Tue, :49 Page 1 of 26

2 Page 2 of 26

3 [1] Additional Photos [3] [4] [5] [6] [7] I've had a hard time not sharing this project with you already! My friend Debbie [8] wrote me a long long while back about needing Page 3 of 26

4 help with her media center in her living room. Here's from Debbie: Hi there. My name is Debbie and I'm a crazy crafter/diyer. I've dabbled in the likes of cross-stitching, quilting, crocheting, print making, jewelry and sewing. I also do all the fun parts of home interior like tiling, putting down wood floors, painting, trim work, re-siding the house and decorating. But my love for building furniture came when I found Ana's site. And boy, have I taken advantage of all the plans. I am also a stay-at-home mom to two insane kids, certifiable, really. There is my 3-year old Haley. Need I say more -- she's three. She keeps me on my toes more than I care to mention, but it's all in good fun. Then there is Jack, my 6 year old boy who was born with Down syndrome (and now battling leukemia). Having a child with special needs truly puts parenting in a different category. Until Haley came along, I had no idea how much thought went into everything I planned with Jack. From managing visits to the grocery store, play dates with other children, to organizing my home. It's like having his IEP (Individualized Education Plan) at school, I need to create a "least restrictive environment" at home as well. Page 4 of 26

5 With that in mind, our TV set-up was just not working with Jack. If I had a nickel for every time I told Jack to stop standing in front of the TV, well, I'd be buzzing around in a 1965 Mustang convertible. It just wasn't fair to keep yelling at him and so we had to do something about it. We Page 5 of 26

6 ended up putting the TV on the wall, but aesthetically, it just wasn't the look I was going for. Page 6 of 26

7 Page 7 of 26

8 Enter Ana and her fabulous plans. After many discussions regarding my issue, we decided on a tall corner console with plenty of storage. It's a fabulous plan, easy to follow and provides one less headache in our lives. No more telling Jack, "You make a better door than a window." Now, if someone can just help me with his constant requests for the Wiggles. Is there a plan for that?!? Page 8 of 26

9 Page 9 of 26

10 Thank you Debbie for letting me work with you on this project. It has brought me great joy to know that I can help in some way to make your life a tiny bit more manageable. Page 10 of 26

11 Page 11 of 26

12 I cannot believe the room transformation as well!!!! You truly are an amazing woman! Page 12 of 26

13 If you'd like to go a meet Debbie, read more about her story - and get the details on those fabulous curtains - and see more photos and construction details - and the low down on that paint finish - PLEASE stop over and visit Debbie at Painted Therapy. [8] Thanks Debbie! Summary: Build a corner media stand! Free plans from Ana-White.com CategoriesProject Type: Media and Entertainment Centers [9] Room: living room [10] Skill Level: Advanced [11] Style: Cottage Style Furniture Plans [12] Dimensions: Page 13 of 26

14 1 sheet ¾ plywood cut into strips 15 ¾ wide by 8 feet long (referred to as 1x16 boards in this plan) 1 8 feet long (you can use scrap 1x16s ripped down if you have a tablesaw) 5 8 feet long 1 sheet ¼ plywood (for back and door backs) 2 8 feet long 1 6 feet long 5 ¼ base moulding (6 foot stick) 1x3s for door frame or other materials for doors 2 screws or 1 ¼ pocket hole screws 2 and 1 ¼ finish nails Wood glue Finishing supplies Page 14 of 26

15 Cut List: /2" (dividers) 1 20 (center shelf) 4 48 ends cut as shown in step 2 (shelves) /4" (sides) /4 (back supports) 1 1/4 24 1/2 x 47 1/4" (back middle) 2 1/4 13 x 47 1/4" (back middle) /4 (side face frame) /2" (shelf face frame trim) TOP /2" /2" (both ends cut at 45 degrees off square, ends NOT parallel, long point measurement) /2" (both ends cut at 45 degrees off square, ends NOT parallel, long point measurement) /2" (both ends cut at 45 degrees off square, ends NOT parallel, long point measurement) General Instructions: Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck! Step 1 Page 15 of 26

16 [13] Let's start by building those top shelves for the media controllers. I recommend using a Kreg Jig [14] as Debbie did, but if you don't have one, you can also countersink screws or use a finish nailer and glue. If you are using the Kreg Jig, go through the entire plan and mark out and drill all pocket holes now - it's easier to drill a pocket hole on a board rather than on a project! Step 2 Page 16 of 26

17 [15] Now we are going to add the top and bottom to the shelves. What I would do is attach the top from underside with 3/4" PHs and 1 1/4" PH screws, and then attach the bottom shelf from underside with 2" countersunk screws, as it will be very difficult to get your drill in there to drive a PH screw. Step 3 Page 17 of 26

18 [16] Now on the sides, mark out all shelf locations. PH users should drill 3/4" PHs along sides of all shelves. Attach with screws and glue. Step 4 Page 18 of 26

19 [17] And then add back pieces. Step 5 Page 19 of 26

20 [18] Fill in the back with 1/4" plywood. I'd cut these to fit so you get a perfect fit. TIP: Drill holes for cords at this step! Step 6 Page 20 of 26

21 [19] Now we do the face frame! You can build your face frame first with 3/4" PHs and 1 1/4" PH screws or attach each board with nails and glue. Step 7 Page 21 of 26

22 [20] Nail moulding on bottom mitering the corners. Step 8 Page 22 of 26

23 [21] And the decorative top isn't entirely necessary, but we wanted to add something pretty to the top. Nail down with 1 1/4" finish nails and glue. Step 9 Page 23 of 26

24 [22] Step 9 Instructions: Debbie ended up doing overlay doors, which is a great idea. For inset doors, you will want to measure your openings - just to be SURE of the opening - and then build to suit. I like to leave 1/8" gaps all the way around. For overlay doors, build your doors slightly larger than the opening and use overlay hinges. Overlay doors will be easier to install and open and close easier. Step 10 Page 24 of 26

25 [23] For more details on this beautiful finish, please visit Debbie at Painted Therapy [8]. Thanks Debbie! Finishing InstructionsPreparation Instructions: Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed. Source URL: Links [1] [2] [3] Page 25 of 26

26 46.jpg [4] 46.jpg [5] 46.jpg [6] 46.jpg [7] 46.png [8] [9] ntertainment-centers [10] [11] [12] [13] jpg [14] [15] jpg [16] jpg [17] jpg [18] jpg [19] jpg [20] jpg [21] jpg [22] jpg [23] JPG Page 26 of 26