i-models Kansas City Revit Users Group September, 2013
|
|
- Allen Powell
- 5 years ago
- Views:
Transcription
1 i-models Kansas City Revit Users Group September, 2013
2 Agenda i-model Definition Creation of i-models from Revit Reading an i-model Bentley Users collaborating with Revit Users Bentley View free Bentley Navigator Review Markup Clash Schedule Simulation Excel Access Transformation How to publish i-model Composer
3 i-models - Definition Bentley System s approach to addressing interoperability is based on a federated strategy and supports information exchange using an application-neutral container, i.e., i-models. Immutable, read-only, 2D or 3D Portable, Purpose Fit for Sharing and Distribution Support DRM and Digital Signatures Not a substitute for Industry Standards IFC, LandXML, ISO15296 but you can store those data types IN an i-model Print to PDF from an i-model
4 i-models - Definition Clash Resolution Dynamic Review Material Estimating Structural Analysis Schedule Simulation Precise Provenance Self-Describing Portable Geometrically & Geospatially Source No Application Knowledge to Interpret Lighter weight and available for mobile
5 i-models Where does one get the plug-in
6 i-models How does the Revit Plug-In Work WYSWIG per view What You See (in the Revit View) Is What You Get (in the i-model)
7 i-models What can one do with it? AECOSim Building Designer Reference / Review
8 i-models What can one do with it? AECOSim Building Designer Reference / Review
9 i-models What can one do with it? AECOSim Building Designer Coordinates
10 i-models What can one do with it? AECOSim Building Designer Coordinates Survey Point = Global Origin
11 i-models What can one do with it? Bentley View - Free
12 i-models What can one do with it? Bentley View
13 i-models What can one do with it? Bentley View Print i-model to 3D PDF via Bentley View with Property data included
14 i-models What can one do with it? Bentley Navigator View, Review/Markup, Clash, Animate
15 i-models Navigator View/Analyze Review the intelligence of all components All parameters come over
16 i-models Navigator View/Analyze Review the intelligence of all components View tools to highlight / zoom Grid view to see all items
17 i-models Navigator View/Analyze Search tools combined with Visual review tools (isolate, transparency, zoom)
18 i-models Navigator View/Analyze Search tools combined with Visual review tools (isolate, transparency, zoom)
19 i-models Navigator View / Render Full photo-realistic rendering using Luxology
20 i-models Navigator Markup Create mark-ups within the same environment
21 i-models Navigator Markup Create mark-ups within the same environment
22 i-models Navigator Markup Create markup with access for all Use the Marker to Open, View or Preview
23 i-models Navigator Clash Create the job from References, Levels, and/or Item Sets/Groups Apply Suppression Rules Review Results
24 i-models Navigator Clash Create the job from References, Levels, and/or Item Sets/Groups Apply Suppression Rules Review Results
25 i-models Navigator Clash Create the job from References, Levels, and/or Item Sets/Groups Apply Suppression Rules Review Results
26 i-models Navigator Clash Group clashes together from clashing items
27 i-models Navigator Clash Clearing the group or statusing the group affects all
28 i-models Navigator Clash Create Markups from Clashes
29 i-models Navigator Simulation Schedule Simulation apply time to elements
30 i-models Navigator Simulation Schedule Simulation file types from Help File
31 i-models iware for imodel usage in other Apps
32 i-models Excel Open / Pull data from an i-model to a spreadsheet
33 i-models Excel Open / Pull data from an i-model to a spreadsheet
34 i-models Excel Open / Pull data from an i-model to a spreadsheet
35 i-models Excel Open / Pull data from an i-model to a spreadsheet
36 i-models Access Open / Pull data from an i-model to a database
37 i-models Access Open / Pull data from an i-model to a database
38 i-models Access Open / Pull data from an i-model to a database
39 i-models Transformation Transform Description Aggregate Items Performs aggregate operations like: AVERAGE, SUM, COUNT Associate Items Generate relationships between items in an i-model Export an i-model to a DGN file (if export rights are granted in Export to Dgn source i-model) Export to Excel Export an i-model to an Excel spreadsheet Filter Items Filter items in an i-model Import from Excel Generate an i-model from an Excel Spreadsheet Infer Properties Populate property values on items in an i-model Import Items Import the items from one i-model into another i-model Map Schemas Transform the data in an i-model based on schema mappings Import Schema Import a schema from one i-model into another i-model Transform the data in an i-model based on an updated Update Schema revision of its schema The process to modify, augment, and republish i-models
40 i-models Transformation Filter Remove intelligence for purpose built i-models / purpose delivered
41 i-models Transformation Augment Add intelligence for purpose built i-models / purpose delivered
42 i-models i-model Composer Assemble and publish multiple file types
43 i-models i-model Composer Keep files referenced together for easy update of individual files OR Package as one single file, with Protection, Rights, and Expiration Date Assemble and publish multiple file types
44 i-models i-model Composer Filter and rename properties on publish
45 i-models i-model Composer Assemble and publish multiple file types package as a whole
46 RFA Interpreter The ability to pull RFA content into ABD without using Revit The RFA Interpreter in AECOsim Building Designer WILL allow the RFA to: Access and select the types defined within the RFA Retain its native parametric behaviors and properties, which will be exercisable in AECOsim Building Designer (such as lengths and angles) Retain its business properties (Such as manufacturer, catalog number, and fire rating) Retain its perforator, to allow content to cut openings (such as doors and windows) Retain its mechanical & plumbing connection points (for air handlers, plumbing fixtures, etc.) Retain its 2D plan and elevation symbols Register itself with the DataGroup Catalog, mapping its business and parametric properties to counterparts in AECOsim Building Designer Map RFA attributes to ABD symbology and/or Part & Family Behave like a native ABD element (similar to BXF or PAZ) Support RFA content versions
47 RFA Interpreter The RFA interpreter in AECOsim Building Designer WILL NOT support: Revit system types (walls, curtain wall, stairs, etc..) 2D only RFAs (title blocks tags, profiles, etc..) Embedded formats (DWG, SKP, etc. placed inside the RFA) Changing the original RFA definition The ability to pull RFA content into ABD without using Revit
48 Navigator Mobile Review i-models and docs from your mobile device
49 i-models Contact Info Shawn Foster Black and Veatch, Energy
Programme TOC. CONNECT Platform CONNECTION Client MicroStation CONNECT Edition i-models what is comming
Bentley CONNECT CONNECT Platform MicroStation CONNECT Edition 1 WWW.BENTLEY.COM 2016 Bentley Systems, Incorporated 2016 Bentley Systems, Incorporated Programme TOC CONNECT Platform CONNECTION Client MicroStation
More informationAECOsim Building Designer. Quick Start Guide. Chapter 2 Making the Mass Model Intelligent Bentley Systems, Incorporated.
AECOsim Building Designer Quick Start Guide Chapter 2 Making the Mass Model Intelligent 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Making the Mass Model Intelligent...3
More informationAECOsim Building Designer. Quick Start Guide. Chapter A08 Space Planning Bentley Systems, Incorporated
AECOsim Building Designer Quick Start Guide Chapter A08 Space Planning 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Space Planning...3 Sketches... 3 SpacePlanner... 4 Create
More informationOpenPlant. Hayley Brown Industry Consultant, Bentley Plant Bentley Systems, In
OpenPlant Hayley Brown Industry Consultant, Bentley Plant tley Systems, In co Introduction What is OpenPlant? OpenPlant is the branding for the next generation of applications and tools based on ISO 15926
More informationSamuel Hudson BIM Support Specialist. Jeff Owens AIA, LEED AP
BIM Preparation for the USACE Lessons Learned in Conversion from REVIT to BENTLEY BIM Presenters: Samuel Hudson BIM Support Specialist Jeff Owens AIA, LEED AP L E ll Lee Ezell Consulting BIM Specialist
More informationAutoPLANT Product Update
AutoPLANT Product Update DK User Meeting 15 th November 2011 Chris Binns AutoPLANT Product Manager Agenda Introduction to me... Where we are today... AutoPLANT V8i (SELECTseries 3) Where we are going...
More information3D Modeling Demonstration
2014 Bentley Systems, Incorporated 3D Modeling Demonstration Derricke Gray, Product Manager Bentley Civil Americas ESS Statewide Rollouts: 3D Modeling Engineering Content Management (ProjectWise) 2 WWW.BENTLEY.COM
More informationBentleyuser.dk ÅRSMØDE 2011 Vejle,
2011 Bentley Systems, Incorporated Bentleyuser.dk ÅRSMØDE 2011 Vejle, 14.+15.11.2011 Bentley OpenPlant Update Carsten Gerke Senior Sales Director Bentley Plant EMEA Today s Agenda 2010 Bentley Systems,
More informationPlant & Process Electrical Design Introduction to I&W, promis e & BRCM
2014 Bentley Systems, Incorporated Plant & Process Electrical Design Introduction to I&W, promis e & BRCM Rick Black- Industry Sales Director - Electrical Group EMEA 3 WWW.BENTLEY.COM 2014 Bentley Systems,
More informationBentley's AECOsim Energy Simulator and What Next for Energy Simulation
Bentley's AECOsim Energy Simulator and What Next for Energy Simulation Drury B. Crawley, Ph.D., FASHRAE, BEMP, FIBPSA 26 January 2013 1 WWW.BENTLEY.COM 2013 Bentley Systems, Incorporated AECOsim Energy
More informationAECOsim Building Designer. Quick Start Guide. Chapter A06 Creating a Master Model Bentley Systems, Incorporated.
AECOsim Building Designer Quick Start Guide Chapter A06 Creating a Master Model 2012 Bentley Systems, Incorporated www.bentley.com/aecosim Table of Contents Creating a Master Model...3 References... 4
More informationAutodesk Revit Architecture 2014
CADLearning for Autodesk Revit Architecture 2014 Course Details 52+ hours of training 534 video tutorials Exercise files included Instructor: Jason Boehning Course Description CADLearning for Autodesk
More informationOpenBridge Modeler: What is it and how can I use it today?
2015 Bentley Systems, Incorporated OpenBridge Modeler: What is it and how can I use it today? Steve Willoughby, Senior Application Engineer Agenda: Introducing OpenBridge Modeler OpenBridge Modeler Features
More informationBIM. e Submission Guideline Structural. Annex 1a. Recommended Process Revit 2010
BIM e Submission Guideline Structural Annex 1a Recommended Process Revit 2010 Building and Construction Authority 5 Maxwell Road #16-00 Tower Block MND Complex Singapore 069110 www.bca.gov.sg Revision
More informationAGENDA: BIM Introduction. Large-Scale Value. Value for Architects. Conceptual BIM / Small BIM. All-Out BIM. BIM Introduction
From Conceptual BIM to All-Out BIM Brent Mauti, Architect BARCH, OAA, MAA, SAA, AAA, MRAIC, NCARB, AIA, LEED-AP CH2M HILL CANADA ARCHITECTS INC. brent.mauti@ch2m.com Member of the Manitoba Association
More informationMastering AutoCAD 2D
Course description: Mastering AutoCAD 2D Design and shape the world around you with the powerful, flexible features found in AutoCAD software, one of the world s leading 2D design applications. With robust
More informationMODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS
MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS WHAT S INSIDE INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 1 OVERVIEW 1 SETTING UP LAYERS AND CLASSES 1 CREATING OBJECT
More informationW H I T E P A P E R. Smart 3D Interop. Intelligent Referencing
W H I T E P A P E R Smart 3D Interop Intelligent Referencing Contents 1. Introduction... 1 2. Key Business Drivers... 3 2.1. Business Processes... 3 2.1.1. Disconnected Workshare... 3 2.1.2. Intellectual
More informationSection 4: Ontario Realty Corporation CAD Standards and Guidelines
Section 4: Ontario Realty Corporation CAD Standards and Guidelines Ontario Realty Corporation 11 th Floor, Ferguson Block 77 Wellesley Street West Queen s Park Toronto, ON, M7A 2G3 August 10, 2007 Version
More informationAutodesk Revit Architecture 2014
ISI ACADEMY Autodesk Revit Architecture 2014 Getting Started Starting Revit Starting Revit for the First Time Opening a Project File Identifying the User Interface Managing User Interface Understanding
More informationISO INTERNATIONAL STANDARD. Geographic information Positioning services. Information géographique Services de positionnement
INTERNATIONAL STANDARD ISO 19116 First edition 2004-07-01 Geographic information Positioning services Information géographique Services de positionnement Reference number ISO 19116:2004(E) ISO 2004 PDF
More information6/12/2012. ADVANCED BIM PART I Setting up Navisworks Files & Working with Clash Reports Presenter: Steve Hunt Dee Cramer, Inc.
ADVANCED BIM PART I Setting up Navisworks Files & Working with Clash Reports Presenter: Steve Hunt Dee Cramer, Inc. 1 Presenter BIO Steven M. Hunt BIM/CAD Manager - Dee Cramer, Inc. in Holly, Michigan.
More information6/12/2012. ADVANCED BIM PART I Setting up Navisworks Files & Working with Clash Reports Presenter: Steve Hunt Dee Cramer, Inc. Presenter BIO.
ADVANCED BIM PART I Setting up Navisworks Files & Working with Clash Reports Presenter: Steve Hunt Dee Cramer, Inc. Presenter BIO Steven M. Hunt BIM/CAD Manager - Dee Cramer, Inc. in Holly, Michigan. Estimating
More informationStream Design: From GEOPAK to HEC-Ras
10 Stream Design: From GEOPAK to HEC-Ras OBJECTIVES Provide you with a general understanding of GEOPAK Cross Section Reports and their capability to generate geometric information for the HecRas program.
More informationAutodesk Revit MEP Fundamentals
Autodesk Revit MEP Fundamentals Course Length: 4 days To take full advantage of Building Information Modeling, the Autodesk Revit MEP: Fundamentals training course has been designed to teach the concepts
More informationMODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS
MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS TABLE OF CONTENTS INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 2 OVERVIEW 2 SETTING UP LAYERS AND CLASSES 2 CREATING
More informationAUGI Tips and Tricks: The Reunion Tour Autodesk Revit Style
AUGI Tips and Tricks: The Reunion Tour Autodesk Revit Style Donnia Tabor-Hanson Cope Architecture AB3279 After many years of having a successful Autodesk University class on AUGI tips and tricks featuring
More informationFull Contents. Survey V8.08 Essentials
Section 1: Overview Essentials 1.1 Introduction... 3 Learning InRoads Survey... 3 Basic Rules... 3 How to Use This Guide... 4 Section Breakdown... 5 Section 1: Overview Essentials... 5 Section 2: Production
More informationIntroducing Bentley Map VBA Development
Introducing Bentley Map VBA Development Jeff Bielefeld Session Overview Introducing Bentley Map VBA Development - In this session attendees will be provided an introductory look at what is required to
More informationGetting Started with Revit
AUTODESK Autodesk REVIT Revit TRAINING Training TUTORIAL Tutorial Getting Started with Revit FOCUS Focus KUWAIT Kuwait CAD Cad Team 2012-13 Step 01 02 Grid & levels Grid create 5 vertical grid lines grid
More informationProConcrete. Gernot Jeromin Product Manager Bentley Systems, Incorporated
ProConcrete Gernot Jeromin Product Manager ProConcrete 3D CAD Software for Concrete and Reinforcement 2 WWW.BENTLEY.COM What is ProConcrete AutoCAD Application MicroStation V8i version will be available
More informationA Quick Spin on Autodesk Revit Building
11/28/2005-3:00 pm - 4:30 pm Room:Americas Seminar [Lab] (Dolphin) Walt Disney World Swan and Dolphin Resort Orlando, Florida A Quick Spin on Autodesk Revit Building Amy Fietkau - Autodesk and John Jansen;
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10303-511 First edition 2001-04-15 Industrial automation systems and integration Product data representation and exchange Part 511: Application interpreted construct: Topologically
More informationSession 3 _ Part A Effective Coordination with Revit Models
Session 3 _ Part A Effective Coordination with Revit Models Class Description Effective coordination relies upon a measured strategic approach to using clash detection software. This class will share best
More informationDrawing Management Brain Dump
Drawing Management Brain Dump Paul McArdle Autodesk, Inc. April 11, 2003 This brain dump is intended to shed some light on the high level design philosophy behind the Drawing Management feature and how
More informationAutodesk Revit Building. Getting Started with
Autodesk Revit Building Getting Started with Autodesk Revit Building April 2006 Copyright 2006 Autodesk, Inc. All Rights Reserved This publication, or parts thereof, may not be reproduced in any form,
More informationCONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT...
CONTENTS CHAPTER 1 WHAT THIS IS ALL ABOUT... 17 INTRODUCTION... 17 Terminology... 18 MACINTOSH AND WINDOWS... 20 CONVENTIONS USED IN THIS TUTORIAL... 21 Command Menu Title And Pull-Down Menu... 22 Commands,
More informationAutoCAD Architecture 2014
CADLearning for AutoCAD Architecture 2014 Course Details 19+ hours of training 325 video tutorials Exercise files included Instructor: Reid Addis Course Description CADLearning for AutoCAD Architecture
More informationService Release PLANBAR
Service Release PLANBAR 2016-1-2 You can only use this version if you have installed DVD number 03-02-02-16-FTW (PLANBAR 2016-1-1 Release) or DVD number 02-02-11-15-FTW (PLANBAR 2016-1 Release) and the
More information2014 NCLUG Summer Conference. Workshops
Workshops [CM Workshop] NCDOT Corridor Modeler (CM) Delta Training (3 Day) [SS2] Oak Thammavong, NCDOT Creating & Customizing templates presented by NCDOT, Oak Thammavong. The Advanced OpenRoads Technology
More informationbentleyuser.se Användardagar Bentley Plant Directions
bentleyuser.se Användardagar 8-9.11.2012 Bentley Plant Directions Inge-Magnar Olerud Agenda Plant Design recent history Current status OpenPlant (details in MP2 and MP3, today 14:00-16:10) AutoPLANT (details
More informationAutodesk Revit MEP 2014
ISI ACADEMY Autodesk Revit MEP 2014 Getting Started Starting Revit Starting Revit for the First Time Opening a Project File Identifying the User Interface Components Managing User Interface Components
More informationMary Gainer NASA Langley Research Center Hampton, VA ESRI Federal User Conference 2005
Mapping Drains from Inside-Out Mary Gainer NASA Langley Research Center Hampton, VA 757-864-7762 ESRI Federal User Conference 2005 Agenda Developing orthographic floor plans that map to geographic space
More informationPiping Workflow for MEP AutoCAD Piping Phil Nower Hazen and Sawyer
Piping Workflow for MEP AutoCAD Piping Phil Nower Hazen and Sawyer MP3512-L: In this class we will harness the power of MEP Data in AutoCAD. We will review the workflow to fully utilize this Data throughout
More informationAutodesk Revit MEP Learning Essentials Training Course Outline
Module 00 Revit in a Nutshell Interactive exercise on creating and documenting a basic building Module 01 Introduction to the Principles of BIM Simple Truths Behind the hype The benefits of BIM What will
More informationOpenBridge Designer Interoperability
OpenBridge Designer Interoperability Steve Willoughby, Senior Application Engineer 1 WWW.BENTLEY.COM 2018 Bentley Systems, Incorporated 2018 Bentley Systems, Incorporated Agenda: OBM to LBC and Back OBM
More informationWhat s New in Autodesk Inventor 2018
What s New in Autodesk Inventor 2018 Welcome & Agenda Introduction to Inventor 2018 Professional- Grade Design Enhancements Expanded I nteroperability The I nventor Experience Autodesk Inventor 2018 I
More informationAutodesk Inventor LT. Easy as 1, 2, 3D.
Autodesk Inventor LT Easy as 1, 2, 3D. Model Your Part Designs in 3D With parametric 3D solid part modeling in Autodesk Inventor LT software, you can model your part designs in 3D instead of simply drawing
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10303-508 First edition 2001-04-15 Industrial automation systems and integration Product data representation and exchange Part 508: Application interpreted construct: Non-manifold
More informationAutodesk Navisworks: Using Autodesk Navisworks in a BIM Workflow
Autodesk Navisworks: Using Autodesk Navisworks in a BIM Workflow Course Length: 2 days The Autodesk Navisworks Using Autodesk Navisworks in a BIM Workflow learning guide teaches you how to better predict
More information***************************************************************************** DRAFT UFGS- 01 XX XX (FEB 2014)
DRAFT UFGS- 01 XX XX (FEB 2014) ------------------------ Drafting Activity: USACE UNIFIED FACILITIES GUIDE SPECIFICATION SECTION TABLE OF CONTENTS DIVISION 01 GENERAL REQUIREMENTS SECTION 01 XX XX (FEB
More informationDRAWING FROM WITHIN USING ART TO TREAT EATING DISORDERS
page 1 / 5 page 2 / 5 drawing from within using pdf This post was guest authored and contributed by Suresh Mohan. Suresh is the Product Manager for PDF Viewer at Syncfusion Software where he specializes
More informationWhat s New in Bentley Civil SELECTseries 3
What s New in Bentley Civil SELECTseries 3 Introducing OpenRoads Technology Ian Rosam Product Manger, Bentley Civil 1 WWW.BENTLEY.COM 2013 2013 Bentley Bentley Systems, Incorporated Bentley Civil/Transportation
More informationEasternGraphics GmbH New Features in pcon.planner 7.7 1/9
EasternGraphics GmbH New Features in pcon.planner 7.7 1/9 Inhalt 1 Working with Articles (pcon.planner PRO)... 3 1.1 Article functions on the Quick Access Toolbar (pcon.planner PRO)... 3 1.2 OFML Aided
More informationService Release for PLANBAR
Service Release for PLANBAR 2017-1-4 You can only use this version if you have installed one of the following versions: DVD number 05-02-05-17-FTW (PLANBAR 2017-1-3 Release) DVD number 04-02-02-17-FTW
More informationServices Overview. Northeast Blueprint
Services Overview 2D CAD Conversions Paper to CAD 2D CAD Conversions Construction Engineering / CAD Services Construction Markups Consultant Drawings Coordinated Drawings As -Builts Steel Structural Detailing
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10303-109 First edition 2004-12-01 Industrial automation systems and integration Product data representation and exchange Part 109: Integrated application resource: Kinematic
More information2010 Bentley Systems, Incorporated
BentleyUser.dk 2010 AutoPLANT Product Update, 8 th November Chris Binns AutoPLANT Product Manager Agenda Introduction to me Who I am, my background etc. Latest AutoPLANT Release Current AutoPLANT Development
More informationContour Module for MountainsMap
All the essential tools for geometric dimensioning & tolerancing of profiles Calculate dimensions of profiles using interactive tools Define & display pass/fail criteria with tolerances for any dimension
More informationComputer Aided Design and Engineering (CAD)
Oakland Community College 2017-2018 Catalog 1 Computer Aided Design and Engineering (CAD) CAD 1050 Geometric Dimensioning and Tolerancing (GD&T) This course is designed to cover the fundamentals as well
More informationHow technology is changing the way we deliver Structural Steelwork. Brenden Picton Phil Shanks
How technology is changing the way we deliver Structural Steelwork Brenden Picton Phil Shanks Presentation Outline Project Introduction & Process Description From the Engineers Perspective From the Detailers
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10303-519 First edition 2000-03-01 Industrial automation systems and integration Product data representation and exchange Part 519: Application interpreted construct: Geometric
More informationAdvance Concrete 2014 Service Pack 1
Advance Concrete 2014 Service Pack 1 This document describes the improvements in Service Pack 1 for Advance Concrete 2014. GENERAL Interaction between Advance Concrete and Advance Steel. Advance Steel
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10303-232 First edition 2002-06-01 Industrial automation systems and integration Product data representation and exchange Part 232: Application protocol: Technical data packaging
More informationAR Glossary. Terms. AR Glossary 1
AR Glossary Every domain has specialized terms to express domain- specific meaning and concepts. Many misunderstandings and errors can be attributed to improper use or poorly defined terminology. The Augmented
More informationTCC/SHORE TRANSIT BUS MAINTENANCE FACILITY - PHASE II
SECTION 013300 - SUBMITTAL PROCEDURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification
More informationMastering Autodesk Navisworks 2013
Mastering Autodesk Navisworks 2013 Dodds, J ISBN-13: 9781118281710 Table of Contents Foreword xvii Introduction xix Part 1 Navisworks Basics 1 Chapter 1 Getting to Know Autodesk Navisworks 3 Interface
More informationREVIT - RENDERING & DRAWINGS
TUTORIAL L-15: REVIT - RENDERING & DRAWINGS This Tutorial explains how to complete renderings and drawings of the bridge project within the School of Architecture model built during previous tutorials.
More informationPreview Guide. Contents. AUTOCAD Raster Design 2008
AUTOCAD Raster Design 2008 Preview Guide AutoCAD Raster Design 2008 software is the leading raster application for design professionals in any industry who need to use or reuse scanned paper drawings or
More informationATHENA2014. Drawing, planning, designing be even more productive with the new upgrade! Really fast! Really good!
ATHENA2014 Drawing, planning, designing be even more productive with the new upgrade! Really fast! Really good! With the development of the ATHENA 2014 Upgrade the emphasis this time is on increasing productivity.
More informationChief Architect New Feature List
SYSTEM / PERFORMANCE Chief Architect Premier X4 is available in 64 bit and 32 bit versions. The 64 bit version is more efficient in managing memory and you will see better performance on larger plan files
More informationUsing Dynamic Views. Module Overview. Module Prerequisites. Module Objectives
Using Dynamic Views Module Overview The term dynamic views refers to a method of composing drawings that is a new approach to managing projects. Dynamic views can help you to: automate sheet creation;
More informationMick Hodgson. Tekla Structures, Tekla Versions And Software Evolution
Mick Hodgson 2018 Tekla Structures, Tekla Versions And Software Evolution Tekla Version 15 Main Points Unlimited Models Quick modelling tools Fast drawing production Tube CNC Tekla Version 15 Main Points
More informationRevit Architecture Student Workbook
Revit Architecture Student Workbook Building Information Modeling with Revit Architecture Contents Introduction... 5 Unit 1... 9 Theory: CAD Versus BIM... 9 Revit Architecture: Introduction, Interface,
More informationFACADE: Future-proofing Architectural Computer-Aided DEsign
FACADE: Future-proofing Architectural Computer-Aided DEsign MacKenzie Smith Associate Director for Technology, MIT Libraries Principal Investigator, MIT FACADE Project MIT FACADE Project Develop Long-Term
More informationWELCOME TO CHEMIONIX. Chemionix e-solutions Pvt Ltd Mumbai India
WELCOME TO CHEMIONIX Mumbai CHEMIONIX: YOUR OUTSOURCING PATNER Companies have been outsourcing since time began. It is only recently that business processes can be outsourced across countries and continents.
More informationOptimizing Digital Drawing Files and BIM Models for Measurement and Estimating
Optimizing Digital Drawing Files and BIM Models for Measurement and Estimating Simon Lovegrove MRICS, AAIQS - Exactal CM4228 Drawing file formats issued for measurement and estimating purposes range from
More informationIntegrating Design using BIM and IFC
Integrating Design using BIM and IFC Thomas Liebich AEC3, Munich, Germany tl@aec3.de www.aec3.com Company overview Founded 1997 7 employees established in 2 countries Main activities information modeling
More informationComputer-Aided Drafting and Design Technology, A.A.S.
Johnson County Community College 1 Computer-Aided Drafting and Design Technology, A.A.S. Drafting technicians are engineering communication specialists who apply mathematics, computer applications and
More informationCivil Product Update. Derricke Gray, Product Manager Bentley Civil Americas
Civil Product Update Derricke Gray, Product Manager Bentley Civil Americas 1 WWW.BENTLEY.COM 2016 Bentley Systems, Incorporated 2016 Bentley Systems, Incorporated Agenda Civil Update o Where we are at
More informationSharing Data Between CAD and GIS Systems. Lien Alpert Phil Sanchez
Sharing Data Between CAD and GIS Systems Lien Alpert Phil Sanchez Session Overview Discuss current CAD strategies Outline ESRI s CAD support Demonstrate techniques for working with CAD data CAD Strategies
More informationDOTD Plan Delivery. Baton Rouge, LA February 10, 2009 Presented by Hollis Ward DOTD Design Automation Manager
DOTD Plan Delivery Moving Ahead Louisiana Transportation Conference 2009 Baton Rouge, LA February 10, 2009 Presented by Hollis Ward DOTD Design Automation Manager Design Automation Manager Role in Plan
More informationUnit 15: Using Symbols and Attributes
Unit 15: Using Symbols and Attributes Overview Many mechanical drawings use the same geometry over and over. The SI symbol, commonly found on Metric drawings, is one example. AutoCAD allows you create
More informationBIM/VDC on TAA Projects:
2018 Logan International Airport BIM/VDC on TAA Projects: Direct Tenant TAA Projects Third Party Development Properties Massachusetts Port Authority Capital Programs & Environmental Affairs Preface Massport
More information1 Introduction. M.Rajabi a, T.Bigga b and M.A.Bartl c.
Optimization of the quantity take-off (QTO) process for Mechanical, Electrical and plumbing (MEP) trades in tender estimation phase of the construction projects M.Rajabi a, T.Bigga b and M.A.Bartl c a
More informationGOSYSTEM TAX 2016 RS E-FILE GUIDE LAST UPDATED: DECEMBER 22, 2016 TAX.THOMSONREUTERS.COM
GOSYSTEM TAX 2016 RS E-FILE GUIDE LAST UPDATED: DECEMBER 22, 2016 TAX.THOMSONREUTERS.COM Note: Please note that all screen images are valid as of December 22, 2016 and are subject to change at Thomson
More informationIFC ALIGNMENT. Common resource for road and rail construction, bridges, tunnels First IFC extension project to address infrastructure works
IFC ALIGNMENT Common resource for road and rail construction, bridges, tunnels First IFC extension project to address infrastructure works Alignment and linear referencing as common resource Alignment
More informationTable of contents. User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7
Table of contents WELCOME TO ADVANCE CONCRETE 2014... 5 USER INTERFACE ENHANCEMENTS... 6 User interface 1: Customizable tool palette... 6 User interface 2: General GUI improvements... 7 MODELING... 10
More information3D Cadastre - Bentley Systems Perspective on Today's Motivations and Opportunities
2015 Bentley Systems, Incorporated 3D Cadastre - Bentley Systems Perspective on Today's Motivations and Opportunities Benoit Fredericque, PhD. Senior Product Line Manager Infrastructure Serving People
More informationVisualizing Construction: A Course in Digital Graphics for Construction Management Students
Visualizing Construction: A Course in Digital Graphics for Construction Management Students Junshan Liu, MBC Auburn University Auburn, Alabama Michael F. Hein, PE Auburn University Auburn, Alabama Constructors
More informationRemote Sensing in an
Chapter 20: Accuracy Assessment Remote Sensing in an ArcMap Environment Remote Sensing Analysis in an ArcMap Environment Tammy E. Parece Image source: landsat.usgs.gov Tammy Parece James Campbell John
More informationBuilding BIM in Australia: A Retrospective and Prospective Analysis
Building BIM in Australia: A Retrospective and Prospective Analysis Professor Keith Hampson Sustainable Built Environment National Research Centre, Australia Co-author: Professor Robin Drogemuller Professor
More informationGetting Started. Chapter. Objectives
Chapter 1 Getting Started Autodesk Inventor has a context-sensitive user interface that provides you with the tools relevant to the tasks being performed. A comprehensive online help and tutorial system
More informationMaterials Tutorial. Chapter 6: Setting Materials Defaults
Setting Materials Defaults Chapter 6: Materials Tutorial Materials display on the surfaces of objects in 3D views and can make a 3D view appear highly realistic. When applied to most objects, material
More informationState of Florida Department of Transportation. FDOT Traffic Plans. Signing & Pavement Markings (CE ) Signalization (CE ) Lighting
State of Florida Department of Transportation FDOT Traffic Plans Signing & Pavement Markings (CE-11-0117) Signalization (CE-11-0119) Lighting (CE-11-0118) User Training Manual October 2017 PRODUCTION SUPPORT
More informationComputer Aided Design Parametric Modelling
Level: 2 Credit value: 10 Unit aim The use of computer aide design (CAD) systems in industry has become an essential part of the modern working environment. It is used at all stages of the design period,
More informationCMI User Day - Product Strategy
CMI User Day - Product Strategy CMI User Day 2003 New Orleans, USA CMI User Day 2003 New Orleans, USA Tino Schlitt T-Systems PLM Solutions CATIA Metaphase Interface - Overview Integration of CATIA V4 /
More informationPlant Design work flow Using Autodesk Plant Design Suite Ultimate. Carlos Caminos CAD Manager - Venture Engineering & Construction, Inc.
Plant Design work flow Using Autodesk Plant Design Suite Ultimate Carlos Caminos CAD Manager - Venture Engineering & Construction, Inc. Class Summary In this class, you will learn about a proven oil and
More informationReference Project. Chapter
Chapter 1 Reference Project For many companies, the default standard may not be sufficient. It is a good base for starting a drawing, but there are always specific company symbols and settings that require
More informationAn Introduction to SITEOPS
2015 Bentley Systems, Incorporated An Introduction to SITEOPS Bob Rolle, P.E Civil Application Engineer Today we ll cover how to: What our Clients want SITEOPS OPTIONEERING SITEOPS Workflow Blow your mind!
More information