Spare part list. Trolleys Push trolley- and Electric trolley
|
|
- Timothy Powell
- 5 years ago
- Views:
Transcription
1 Spare part list Trolleys Push trolley- and Electric trolley
2 LIFTKET Hoffmann GmbH Dresdener Straße Wurzen / Germany sales@liftket.de Ho 01/2018 englisch
3 Overview Code Description Page U Push trolley 4 V Electric trolley 6 W Tandem trolley 11 Order form spare parts 13 3
4 U Push trolley One suspension bolt - push trolley U0101 U0102 U0103 to 1000 kg Code Description Version U0101 side plate cpl H 001/1 U0102 wheel cpl A 010/1 U0103 set of suspension bolts N ( mm) H 014/0 S1 ( mm) H 014.1/0 S2 ( mm) H 014.2/0 to 2000 kg Code Description Version U0101 side plate cpl J 001/1 U0102 wheel cpl A 010/1 U0103 set of suspension bolts N ( mm) J 014/0 S1 ( mm) J 014.1/0 S2 ( mm) J 014.2/0 to 3200 kg Code Description Version U0101 side plate cpl L 001/1 U0102 wheel cpl L 010/1 U0103 set of suspension bolts N ( mm) L 014/0 S1 ( mm) L 014.1/0 S2 ( mm) L 014.2/0 to 6300 kg Code Description Version U0101 side plate cpl R 001/0 U0102 wheel cpl R 010/1 U0103 set of suspension bolts N ( mm) R 014/0 S1 ( mm) R 014.1/0 S2 ( mm) R 014.2/0 4
5 Two suspension bolts push trolley U0201 U0202 U0203 to 500 kg U0201 side plate cpl A 001/1 U0202 wheel cpl A 010/1 U0203 set of suspension bolts N ( mm) A 014/1 S1 ( mm) A 014.1/1 S2 ( mm) A 014.2/1 to 2000 kg U0201 side plate cpl H 001/1 U0202 wheel cpl A 010/1 U0203 set of suspension bolts N ( mm) H 014/2 S1 ( mm) H 014.1/2 S2 ( mm) H 014.2/2 to 3200 kg U0201 side plate cpl L 001/1 U0202 wheel cpl L 010/1 U0203 set of suspension bolts N ( mm) L 014/2 S1 ( mm) L 014.1/2 S2 ( mm) L 014.2/1 bis 6300 kg U0201 side plate cpl R 001/1 U0202 wheel cpl R 010/1 U0203 set of suspension bolts N ( mm) R 014/0 S1 ( mm) R 014.1/1 S2 ( mm) R 014.2/0 5
6 V Electric trolley Components V01051 rectifier one traveling speed two traveling speeds E2 V0106 low voltage control for trolley one traveling speed A 000/0 two traveling speeds G 000/0 V01061 contactor K5 / K6 74 3LC2K contactor K7 sec. traveling speed 74 3LC1K
7 One suspension bolts electric trolley V0105 V0101 V0102 V0103 V0104 to 1000 kg V0101 motor side plate cpl. one traveling speed H 023/1 two traveling speeds H 020/1 V0102 side plate cpl. undriven H 001/1 V0103 wheel cpl. geared H 011/1 ungeared A 010/1 V0104 suspension bolt N ( mm) H 014/0 S1 ( mm) H 014.1/0 S2 ( mm) H 014.2/0 V0105 traveling motor cpl. 16 m/min A 000/0 25 m/min A 000/ m/min A 000/0 to 2000 kg V0101 motor side plate cpl. one traveling speed J 023/1 two traveling speeds J 020/1 V0102 side plate cpl. undriven J 001/1 V0103 wheel cpl. geared H 011/1 ungeared A 010/1 V0104 suspension bolt N ( mm) J 014/0 S1 ( mm) J 014.1/0 S2 ( mm) J 014.2/0 V0105 traveling motor cpl. 16 m/min A 000/0 25 m/min A 000/ m/min A 000/0 7
8 to 3200 kg V0101 motor side plate cpl. two traveling speeds L 006/1 V0102 side plate cpl. undriven L 001/1 V0103 wheel cpl. geared L 011/1 ungeared L 010/1 V0104 suspension bolt N ( mm) L 014/0 S1 ( mm) L 014.1/0 S2 ( mm) L 014.2/0 V0105 traveling motor cpl m/min L 000/0 to 6300 kg V0101 motor side plate cpl. two traveling speeds R 006/1 V0102 side plate cpl. undriven R 001/0 V0103 wheel cpl. geared R 011/1 ungeared R 010/1 V0104 suspension bolt N ( mm) R 014/0 S1 ( mm) R 014.1/0 S2 ( mm) R 014.2/0 V0105 traveling motor cpl m/min R 000/0 8
9 Two suspension bolts - electric trolley V0205 V0201 V0202 V0203 V0204 to 500 kg V0201 motor side plate cpl. one traveling speed A 006/0 two traveling speeds A 020/1 V0202 side plate cpl. undriven A 001/1 V0203 wheel cpl. geared A 011/1 ungeared A 010/1 V0204 set of suspension bolts N ( mm) A 014/1 S1 ( mm) A 014.1/1 S2 ( mm) A 014.2/1 V0205 traveling motor cpl. 16 m/min A 000/0 25 m/min A 000/ m/min A 000/0 to 2000 kg V0201 motor side plate cpl. one traveling speed H 006/0 two traveling speeds H 020/1 V0202 side plate cpl. undriven H 001/1 V0203 wheel cpl. geared H 011/1 ungeared A 010/1 V0204 set of suspension bolts N ( mm) H 014/2 S1 ( mm) H 014.1/2 S2 ( mm) H 014.2/2 V0205 traveling motor cpl. 16 m/min A 000/0 25 m/min A 000/ m/min A 000/0 9
10 to 3200 kg V0201 motor side plate cpl. one traveling speed L 002/1 two traveling speeds L 006/1 V0202 side plate cpl. undriven L 001/1 V0203 wheel cpl. geared L 011/1 ungeared L 010/1 V0204 set of suspension bolts N ( mm) L 014/2 S1 ( mm) L 014.1/2 S2 ( mm) L 014.2/1 V0205 traveling motor cpl. 8 m/min A 000/0 to 6300 kg 12 m/min A 000/ m/min L 000/0 V0201 motor side plate cpl. two traveling speeds R 006/1 V0202 side plate cpl. undriven R 001/1 V0203 wheel cpl. geared R 011/1 ungeared R 010/1 V0204 set of suspension bolts N ( mm) R 014/0 S1 ( mm) R 014.1/1 S2 ( mm) R 014.2/0 V0205 traveling motor cpl m/min R 000/0 10
11 W Tandem trolley W01 W02 W01 tandem trolley cpl kg N ( mm) D 000/0 S1 ( mm) D 000/0 S2 ( mm) D 000/ kg N ( mm) L 000/0 S1 ( mm) L 000/0 S2 ( mm) L 000/ kg N ( mm) R 000/0 S1 ( mm) R 000/0 S2 ( mm) R 000/0 W02 set of suspension bolts cpl kg N ( mm) D 012/0 S1 ( mm) D 012.1/1 S2 ( mm) D 012.2/ kg N ( mm) D 012/0 S1 ( mm) D 012.1/1 S2 ( mm) D 012.2/ kg N ( mm) D 012/0 S1 ( mm) D 012.1/1 S2 ( mm) D 012.2/1 11
12 12
13 Order form spare parts Customer-No. Address: LIFTKET Hoffmann GmbH Dresdener Straße Wurzen / Germany sales@liftket.de Electric chain hoist Type: Voltage: V Hz ph Serial-No.: Control: V Pieces / Meter Place / Date Signature Stamp 13
14 This catalog supersedes all previous editions, which thereby become invalid. Subject to change 14
Spare parts list. Type 13 / Type 15 ELECTRIC CHAIN HOIST
Spare parts list Type 13 / Type 15 ELECTRIC CHAIN HOIST LIFTKET Hoffmann GmbH Dresdener Straße 64-68 04808 Wurzen / Germany +49-3425-89 24-0 +49-3425-89 24-99 sales@liftket.de www.liftket.de Ho 08/2017
More informationSpare part list LIFTKET ELECTRIC CHAIN HOIST
Spare part list LIFTKET ELECTRIC CHAIN HOIST LIFTKET Hoffmann GmbH Dresdener Straße 64-68 04808 Wurzen / Germany +49-3425-89 24-0 +49-3425-89 24-99 sales@liftket.de www.liftket.de Ho 01/2018 englisch 2018
More informationSubArc Digital Series
Digital Series Issued Sept. 01 Index No. ADM/10.0 UK Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy Fabrication Pipe Manufacturing Pressure Vessel
More informationProduct Information. ECA 4000 V Absolute Modular Angle Encoder for Application in High Vacuum
Product Information ECA 4000 V Absolute Modular Angle Encoder for Application in High Vacuum December 2016 ECA 4412 V, ECA 4492 V Absolute angle encoder with high accuracy for use in high vacuum Steel
More informationSECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08)
SECTION 9: PARTS Main Breakdown 105 137 136 113-1 113 141 140 113-2 113-3 111 113-4 114 135 143 144 101 121-1 -1 116 147-1 121-2 115 120 121 107 108 164 162 160 158 138 109 127 126 160 158 123 127 123
More informationIndustrial Solutions. Movement Technology. Precise Robust Reliable
Industrial Solutions Movement Technology Accurate and Economical Coating Precise obust eliable Movement technology for all coating tasks Electric reciprocators The automatic electric reciprocators are
More informationProduct Information. AK ERM 2xx0 TTR ERM 2x00 Modular Angle Encoders with Magnetic Scanning and Mechanical Fault Exclusion
Product Information AK ERM 2xx0 TTR ERM 2x00 Modular Angle Encoders with Magnetic Scanning and Mechanical Fault Exclusion February 2017 ERM 2200 series Consisting of AK ERM 2280 and TTR ERM 2200 or TTR
More informationProduct Information. ECN 413 ECN 425 ERN 487 Rotary Encoders for Elevator Drive Control (IP64 Degree of Protection)
Product Information ECN 413 ECN 425 ERN 487 Rotary Encoders for Elevator Drive Control (IP64 Degree of Protection) June 2017 ECN/ERN 400 series Rotary encoders with integral bearings for elevator technology
More informationMotorhome Entrance Door CaraD-R With Aluminium Door Panel Art. 1389
CaraD-R 1/10 61.1 Content.DOC Motorhome Entrance Door CaraD-R With Aluminium Door Panel Art. 1389 Ordering Details Technical Drawing without Fly Net Door Technical Drawing with Fly Net Door Technical Drawing
More informationINTERPLANT STANDARD - STEEL INDUSTRY
INTERPLANT STANDARD - STEEL INDUSTRY IPSS GUIDELINES FOR ARRANGEMENT DRAWINGS AND DOCUMENTS TO BE SUBMITTED TO AN EOT CRANE CUSTOMER FOR APPROVAL No corresponding Indian Standard exits IPSS:2-02-011-02
More informationEdge banding machines Ambition KDF 440 edition
04/13 creativ design Edge banding machines Ambition 1430-1440 KDF 440 edition A member of the Homag Group of Companies BRANDT Kantentechnik GmbH Weststraße 2 32657 Lemgo Germany Tel. +49 5261/974-0 Fax
More informationProduct Information. EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface
Product Information EQN 1337 F Absolute Rotary Encoder with Tapered Shaft for Fanuc Controls with i Interface 11/2017 EQN 1337 F Rotary encoders for absolute position values Installation diameter 65 mm
More information0,25T Hoist and Trolley TCR 250 AT2S DRG /01/ / 1. If In Doubt Ask REVISION HISTORY. Part Number. 32kg Weight REV.
D-AHT REV REVISION HISTORY REV. DATE APPROVED Scale not to scale Part Number DRG Designed By Drawn By Checked By Approved By Sheet Size A Material Surname T. Mikolajewski T. Mikolajewski B. Aitken Title
More informationProduct Parts Information. Lever Chain Hoists. KL Series. Save These Instructions. Form Edition 2 December Ingersoll-Rand
Product Parts Information Lever Chain Hoists KL Series (Dwg MHP3278) Save These Instructions R Form 48489009 Edition 2 December 2013 2013 Ingersoll-Rand Only allow Ingersoll Rand trained technicians to
More informationPRINT MAY BE REDUCED - DO NOT SCALE. No Compression Load on Ceiling Possible Lateral Load of 8kg 2 Fixed Pins in Shear with Ceiling
Date 05/207 By No Compression Load on Ceiling Possible Lateral Load of 8kg 2 Fixed Pins in Shear with Ceiling Technical Information: 2x Bugle Screw Guide Fixing Optional Non-penetrating Fixingss to Ground
More informationdrive 4X The perfect feeder wire feeder /// simply more /// Perfection is the principle
drive 4X wire feeder The perfect feeder / Perfection is the principle www.multimatrix.info / simply more MULTIMATRIX /drive 4X wire feeder Universal use drive 4X wire feeder With rapid set-up times and
More informationLA-5000 SERIES LINEAR VALVE ACTUATORS
LA-5000 SERIES LINEAR VALVE ACTUATORS GENERAL DESCRIPTION The LA-5000 Series are bi-directional, linear actuators internally geared to produce up to 6,500 lbs. (28,913 N) of thrust, and offer continuous
More informationSignature. Date. Surname. 30 max.
ITEM QTY PART NUMBER DRG - DRG - DRG - DRG 9- TCR DESCRIPTION Trolley Low Headroom Frame TCR / TCR Link Plate Spacer Air Hoist Title of project Date Material Weight Designed by Approved by Surname Date
More informationProduct Information. ECA 4000 V Absolute Modular Angle Encoder for Application in High Vacuum
Product Information ECA 4000 V Absolute Modular Angle Encoder for Application in High Vacuum 10/2017 ECA 4412 V, ECA 4492 V Absolute angle encoder with high accuracy for use in high vacuum Steel scale
More informationSubArc Digital Series
Digital Series Issued Oct. 016 Index No. AD/7. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes
More information15T Hoist and Trolley TMH15000/5 AT15S DRG /02/ ,50 1 / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT28 REV0.
REVISION HISTORY REV. DATE APPROVED D-AHT REV Part Number DRG Title of Part Title of Project Scale not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken
More informationTRANSLATION OF THE SPECIAL MODELS OPTIONS ELECTRIC CHAIN HOIST TYPE GP
TRANSLATION OF THE SPECIAL MODELS OPTIONS ELECTRIC CHAIN HOIST TYPE GP The instruction manual of the GPmodels (9.900.) is the basis for the special models. This attachment is part of the instruction manual.
More information12T Hoist and Trolley TMH12000/4 AT10S DRG /02/ / 1. If In Doubt Ask REVISION HISTORY. Part Number D01-AHT27 REV0.
D-AHT REV REVISION HISTORY REV. DATE APPROVED Part Number DRG Title of Project Scale Not to scale Designed By Drawn By Checked By Approved By Surname T. Mikolajewski T. Mikolajewski B. Aitken Title of
More informationcut technologies foam cutting solutions by sitola foam cutting solutions by sitola learn more at sitola.com
foam cutting solutions by sitola band knives / band saws / cutting wires/ spare parts for foam cutting machines / machine modernisation / machine maintenance / programming software / used foam cutting
More informationWaste Xpress Parts List
Waste Xpress Parts List Year Full Warranty F60-08H--0 Rev. /08 Ordering Parts Order by part number, not by code number Include information from nameplate specification (see figures at right) Complete model
More informationCM-1258Y-SD Concrete Mixer
Form No. 3421-382 Rev A CM-1258Y-SD Concrete Mixer Model No. 68011 Serial No. 402000000 and Up Register at www.toro.com. Original Instructions (EN) *3421-382* A Ordering Replacement Parts To order replacement
More informationEdge banding machines Ambition
05/11 creativ design Edge banding machines Ambition 1650-1680 A member of the Homag Group of Companies BRANDT Kantentechnik GmbH Weststraße 2 32657 Lemgo Germany Tel. +49 5261/974-0 Fax +49 5261/6486 info@brandt.de
More informationMOTORCYCLE DOLLY MODEL NO: MCD1 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS0112
MOTORCYCLE DOLLY MODEL NO: MCD1 PART NO: 7610139 OPERATION & MAINTENANCE INSTRUCTIONS LS0112 INTRODUCTION Thank you for purchasing this CLARKE Motorcycle Dolly. Before attempting to operate this product,
More informationCutting, Drilling and Beveling
Pipe Hole Cutter JK150 The Hongli Model JK150 pipe hole cutter is designed to cut holes up to 152mm into steel pipe. The multiple hole sizes allow the use of Mechanical fittings for branching unpressurized
More informationMoving Test - MT3000
Moving Test - MT3000 Three-Phase Portable Test System Keep ahead with Modular Design The Modular Concept The MT3000 is based on a real modular design concept to provide the greatest possible flexibility
More informationEdge banding machines Ambition
04/13 creativ design Edge banding machines Ambition 1650-1670 A member of the Homag Group of Companies BRANDT Kantentechnik GmbH Weststraße 2 32657 Lemgo Germany Tel. +49 5261/974-0 Fax +49 5261/6486 info@brandt.de
More informationMaster-Feeder-System MFS V2
T E C H N O L O g y F O R T H E W E L d E R S W O R L d. Master-Feeder-System MFS V2 High precision... Constant & precise! MFS V2 the wire feeder system for highly automated laser welding and brazing equipment.
More informationPARTS LIST: Air Control Assembly (1632 Sander)
PARTS LIST: Air Control Assembly (1632 Sander) 1 6293482 Filter... 1 2 6293483 Solenoid Valve... 1 3 6293484 Brake Cylinder... 1 4 6293485 Multi-Hole Connector... 1 5 6293486 Air Valve... 1 6 6293487 Air
More informationRepair Parts List WASHER MODEL NUMBER MAF18PC2. When requesting service or ordering parts, always provide the following information:
Repair Parts List WASHER MODEL NUMBER MAF18PC2 When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005 Maytag
More informationSubArc Digital Series
Series Issued Feb. 0 Index No. AD/. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy fabrication Pipe manufacturing Pressure vessel Processes Submerged
More informationinstallation guide
JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000
More informationDigital Indicator DS 96/48 PK
Data Sheet 10/33-2.1-EN Digital Indicator DS 9/48 P Digital Indicator DS 9/48 PK Inputs Direct current, direct voltage Thermocouple Resistance thermometer Programmable via front keys or PC software Limit
More informationHD installation guide
JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling
More informationPhotometric Report. Internet:
Photometric Report e-mail: service@glp.de Internet: http://www.glp.de Impression Spot One Photometric Report Manufacturer: GLP German Light Products GmbH, Im Stöckmädle 13, 76307 Karlsbad, Germany Product:
More informationInstruction manual for STA 1 sectional door operator
Instruction manual for STA 1 sectional door operator Sectional door operator STA 1 / Rev. 0.3 1 GB 1. Contents 3. General safety instructions 1. Contents 2 2. Key to symbols 2 3. General safety instructions
More information2-channel speed sensor GEL 248 Compact sensor with HTL-/TTL-output signals
2-channel speed sensor GEL 248 Compact sensor with HTL-/TTL-output signals Technical information Version 08.09 General information Application approved speed sensor based on magnetic measurement principle
More informationDemagnetizing. Clamping Chucks. Clamping Plates. Lifting Magnets. Holding Magnets. Demagnetizing. Units. Control Electronics. Non-Ferrous Separators
Wagner Magnete GmbH & Co. KG Obere Straße 15 D-87751 Heimertingen Phone: +49 (0) 8335 980-0 Fax: +49 (0) 8335 980-270 www.wagner-magnete.de e-mail: info@wagner-magnete.de Technology Full of Attraction
More informationprecision SPEED power Efficiency
precision SPEED power Efficiency ASCHERSLEBEN SMART Principle ASCHERSLEBEN RESEARCH & DEVELOPMENT Portal Milling Machine for 5-Side Machining The highly stable machine concept of the ASCAMILL with its
More informationParts List: VBS-3612 Band Saw
Parts List: VBS-3612 Band Saw (refer to breakdowns on pages 35 and 36) Index No. Part No. Description Size Qty 1... VBS3612-101...Gear Box... 1 2... TS-0209101...Socket Head Cap Screw...3/8-16 x 2-1/4...
More informationTransport system without WP carriers designed for interlinking steps within machining production
The reliable and economic solution for conveying large, sensitive parts not placed in a workpiece carrier Transport system without WP carriers designed for interlinking steps within machining production
More informationOrbital Milling. A Buyers Guide.
A Buyers Guide www.miragemachines.com About Mirage Machines Mirage portable machine tools optimise the performance of on-site assets by achieving operational excellence, maximising uptime and improving
More informationExploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
More informationSANDING Sanding machines for sanding of solid wood and veneer
WOOD PROCESSING TECHNOLOGY SANDING Sanding machines for sanding of solid wood and veneer 2 SANDING Sanding machines for sanding of solid wood and veneer Precision, reliability, speed and convenience WEGOMA
More informationBrake Gears Suspension Body - TCS
Brake Gears Suspension Body - TCS-980 Brake Gears Suspension Body - TCS-980 100 426230A00 CENTRE HOUSING 1 101 426230A50 LOAD SHEAVE 1 102 426230200 COUPLING 1 103 426230350 CHAIN GUIDE 1 104 426230360
More informationMCX103A Non-Contact Rotary Position Sensor. Technical Information
MCX103A Non-Contact Rotary Position Sensor Technical Information Revisions Revision History Table of Revisions Date Page Changed Rev 07 Dec 2010 Cover PLUS+1 Compliant logo AB 28 Sep 2010 Replaces BLN-95-8991
More informationMINI-PROF Profiling machine
MINI-PROF Profiling machine Profile technology for all roofs of the world The ideal profiling machine for parallel and conical panels The purpose of the profiling machine MI- NI-PROF is to produce double
More informationTurntable TT 0.8 PF. Rotating speed adjustable between Positioning accuracy better +/- 1 Rotating angle +/- 200
GmbH o Bahnhofstr. 26 o 92536 Pfreimd o Germany Turntable TT 0.8 PF 0.8 m 100 kg Height min. 180 mm Material cover plate Integral skin-foam sheets made of PVC Rotating angle +/- 200 Belt drive Temperature
More informationCrane Control Class 7001
Catalog 17 CONTENTS Description.....................................................Page.................................................. 0 ST DC Static Timer............................................
More informationLASAL A/S. Mobilia MobiBed Spare parts list, specifications and annual servicing. Distributor guide
LASAL A/S Industrivej 15, DK-8881 Thorsoe Phone.: +45 8696 6666 VAT No. 1437 8677 Mobilia MobiBed Spare parts list, specifications and annual servicing Distributor guide Revised in June 2016 Specifications
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
More informationAngle Encoder Modules
Angle Encoder Modules May 2015 Angle encoder modules Angle encoder modules from HEIDENHAIN are combinations of angle encoders and high-precision bearings that are optimally adjusted to each other. They
More informationSECTION 9: PARTS G0453Z
parts breakdown SECTION 9: PARTS G0453Z Headstock Breakdown 4 3 2 20 26 104 21 19 23 22 24 99 97 98 25 94 95 93 14 15 39 40 107 86 41 42 45 62 30 66 61 60 13 9 10 12 11 27 31 33 34 35 73 77-1 77 36 3738
More informationThe Machine Concept with a new Dimension
VerticalLine V100 The Machine Concept with a new Dimension Parallel kinematics increases efficiency and precision By using the V100, premachined blanks can be machined in even shorter times. Cut slugs,
More informationProduct Information. ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control
Product Information ECN 1313 ECN 1325 ERN 1387 Rotary Encoders with Plane-Surface Coupling for Elevator Servo Drive Control July 2017 ECN/ERN 1300 series Rotary encoders with integral bearings for elevator
More informationDynamic Generation of DC Displacement AN 13
Dynamic Generation of DC Displacement AN 13 Application Note to the R&D SYSTEM Nonlinearities inherent in the transducer produce a DC component in the voice coil displacement by rectifying the AC signal.
More informationProduct Information. ERN 1085 Incremental Rotary Encoder with Z1 Track
Product Information ERN 1085 Incremental Rotary Encoder with Z1 Track 02/2018 ERN 1085 Rotary encoder with mounted stator coupling Compact dimensions Blind hollow shaft 6 mm Z1 track for sine commutation
More informationPRODUCTION LINE 1 PALLET/MINUTE HYDRAULIC NAILING MACHINERY MOD. GSI 150 AL 2 WITH TRANSPORT UNIT, MANUF. STORTI, ITALY, 2007.
PRODUCTION LINE 1 PALLET/MINUTE HYDRAULIC NAILING MACHINERY MOD. GSI 150 AL 2 WITH TRANSPORT UNIT, MANUF. STORTI, ITALY, 2007. 2 feeders, 12 nails each = 24 nails 24 захвата с механическим закрытием; Set
More informationKM3000 PORTABLE KEY MILL
KM3000 PORTABLE KEY MILL FEATURES SETUP & OPERATION COMPONENTS & ACCESSORIES TECHNICAL DATA Cut a new, full-depth, 6 inch (152 mm) keyway in less than 4 minutes.* The KM3000 Portable Key Mill is a simple,
More informationTPM + Lenze ECS. Quick Startup Guide D Revision: 02
4091-D012345 00 TPM + Lenze ECS Quick Startup Guide 4091-D032121 Revision: 02 Quick Startup Guide TPM + Revision history Revision Date Comment Chapter 01 27 th July 2012 First release All 02 27 th March
More informationHow to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun
More informationMÖSSNER BANDSAW MACHINES 100 YEARS EXPERIENCE IN CUTTING
MÖSSNER BANDSAW MACHINES 100 YEARS EXPERIENCE IN CUTTING For good reason Mössner Bandsaw Machines are used in all sectors of industry, mainly in the metal processing industry, for a wide range of cutting
More informationred rooster REV. TCR500 / TCR 1000 Link Plate 2TE Air Trolley (2TE/AT/4) DESCRIPTION Air Hoist PART NUMBER DRG TCR 1000 DRG
ITEM QTY PART NUMBER DRG 5- TCR DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) Air TCR5 / TCR Link Plate TE and Trolley 6/6/ - 6kg Title of project Material Weight REV. Designed by Checked by Approved by B.
More information25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
More informationred rooster 2TE Air Trolley (2TE/AT/4) 2TE Air Hoist DESCRIPTION 3 1 DRG TCR 2000C2 2TE Hoist and Trolley 17/07/ kg
ITEMQTYPART NUMBER DRG 5- TCR C 3 DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) TE Air Top Eye TE and Trolley 7/7/3-65kg Title of project Material Weight REV. Designed by Checked by Approved by B. Aitken
More informationMATHEMATICAL MODELS OF GEAR TOOTH SPEED SENSORS WITH DUAL OUTPUTS
MATHEMATICAL MODELS OF GEAR TOOTH SPEED SENSORS WITH DUAL OUTPUTS Ji-Gou Liu 1 and Zhe Zheng 2 1 ChenYang Technologies GmbH & Co. KG., Finsing, Germany 2 University of Shanghai for Science and Technology,
More informationinstallation guide
2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000 SHOWN 3000 MODEL A rolling d oor is a la rge heavy obje ct that moves
More informationPowermax portable automation reference guide
Powermax portable automation reference guide Contents 1 Introduction 4 Track burners 8 Pipe cutters 12 Shape cutters 14 Portable CNC Industrial duty cycles, low operating costs and Hypertherm reliability
More information241 Winch 10 Users Manual
241 Winch 10 Users Manual WWW.WAHLBERG.DK TELEPHONE +45 86 18 14 20 EMAIL: sales@wahlberg.dk Index: TECHNICAL SPECIFICATIONS: 3 GENERAL: 4 PRODUCT CONTENT: 4 DESCRIPTION: 4 AREA OF USE:... 5 OVERVIEW:
More informationParts List: Column Assembly
Column Assembly 39 Parts List: Column Assembly Index No. Part No. Description Size Qty 1... WP2510-401...Idler Support Base... 1 2... TS-1540071...Hex Nut...M10... 2 3... TS-1550061...Flat Washer...M8...
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at
More informationLaser Safety Curtains Page 1 of 5
Laser Safety Curtains Page 1 of 5 Overview For any laser curtain intallation and or hardware questions please do not hesitate to contact Laservision USA at 1-800-393-5565 or chat with our Certified Laser
More informationManual for Propeller Type H40F
Manual for Propeller Type H40F Propeller Type: Propeller Serial No.: Date of Sale: Seal and signature of Manufacturer: Index 1 List of Modifications... 3 2 Description... 4 3 Specification of Helix Propeller
More informationOperating manual. TruTool N 500 (1A1) english
Operating manual TruTool N 500 (1A1) english Table of Contents 1. Safety...4 1.1 General safety information...4 1.2 Specific safety information...5 2. Description...6 2.1 Correct use...7 2.2 Technical
More informationDesign and analysis of Power hack Saw attachment to a Center Lathe
Design and analysis of Power hack Saw attachment to a Center Lathe Parvataneni Chaitanya Vasavi College of Engineering, Email: pchaitanya9@outlook.com and Ph. No: 8019760145. Abstract This work provides
More informationDaily Maintenance. 2. Insert bobbin cases in to rotary hooks. Make sure bobbin thread is not over 2 inches long. Close bobbin case covers.
Rotary hook 1. Open bobbin case covers and remove bobbin cases. Use brush to remove lint build up in and around rotary hooks. Compressed air may also be used. Daily Maintenance Cle aning Oiling Rotary
More information94MB Geared Machine Survey Form Motion Control Engineering, Inc. Phone: Fax:
Page 1 of 8 MCE TO COMPLETE THIS INFORMATION Drawing Number: Installation Date: Engineer Name: Delivery Date: Comments: CUSTOMER INFORMATION Customer Name: Job Name: Customer Address: Contact Name: Contact
More informationIR-2012, IR-2022 studio rack
IR-2012, IR-2022 studio rack assembly instructions Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de
More informationValves with a difference. Electrical Actuators DVC INTERNATIONAL
Valves with a difference Electrical Actuators DVC INTERNATIONAL With DVC International as your business partner, you are always guaranteed a wide, well sorted product range and a unique technical know-how
More informationINSTRUCTION MANUAL VIBRATION SWITCH CVS 100 LC
INSTRUCTION MANUAL VIBRATION SWITCH Meggitt GmbH Kaiserleistraße 51 63067 Offenbach am Main Deutschland / Germany Tel.: +49 69 97 99 05-0 Fax: +49 69 97 99 05-26 E-Mail: Web: info@meggitt.de www.meggitt.de
More informationThree Phase & Single Phase Servo Controlled Voltage Stabilizers
Three Phase & Single Phase Servo Controlled Voltage Stabilizers All components sourced from reputed manufacturers, with confirmation to International standards as minimum prerequisite. 100% raw material
More information7. Operating instructions: EFL 300
7. Operating instructions: EFL 300 Copyright 2015 by Endecotts Ltd. 59 1. Setting up Technical specifications SIEVE SHAKER MODEL: EFL 300 General Information The new EFL 300 combines the best features
More information6-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT set by
6-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT set by R1 Y1 Y2 698 960 1710 2690 1710 2690 X X X 65 65 65 1 10 2.5 12 2.5 12 6-Port Antenna 698 960/1710 2690/1710 2690 65 /65
More informationAssembly Number. Series 700 / / Valves
Page 6100-A/P-1 700 / 20 / Valves Normally closed, swinging gate, electrically actuated, manual reset, trip close MOPD (psi) 0 0 Sanctioned Valves ( for clean fuel oils and heavy oils) Valve Size & Factor
More information+ - 1a. 1b. c. 1d. 1e. Runway Suspended / Surface Cont. Run Installation. 2.0mm DIL DIL Revision - M 23/11/2018 Page 1
230-240V / 50-60Hz IP20 IK00 + - 2.0mm WARNING - THIS LUMINAIRE MUST BE EARTHED This luminaire has been tested and is manufactured to comply with BS EN 60598 : specification for general requirements and
More informationStatic Eliminator Blowers
HDC-AC with built-in high-voltage power supply Replacable Emitter unit Straight louver panel static elimination features and static elimination area Straight louver panel Static elimination time (sec)
More informationV700 HIGH SPEED MACHINING CENTER LONG CHANG MACHINERY CO., LTD. Roller Guide System
Roller Guide System V700 HIGH SPEED MACHINING CENTER LONG CHANG MACHINERY CO., LTD. 01 FIRST V700 SPEED & ACCURACY HIGH SPEED MACHINING CENTER 3-axes high rigidity & precision roller guide ways. Direct
More informationIBV 100/EXE 100 Interpolation and Digitizing Electronics
Linear Encoders Angle Encoders IBV 1/EXE 1 Interpolation and Digitizing Electronics Rotary Encoders 3-D Touch Probes Position Display Units Numerical Controls HEIDENHAIN linear, rotary and angle encoders
More informationALUMIG-250P/300P. Compact Synergic Pulse MIG. Strong power, Multi-functions, Superb performance and Economical choice. Features: Application:
Features: Process: MMA, CO/MAG, Pulse MIG, Double Pulse MIG Soft-switching IGBT inverter system Full digitalized control system, friendly operation interface Synergic operation Precise, clean arc ignition
More informationLSU Duct Liner Sizer. LSU Duc DUCT LINER SIZER MACHINERY DIVISION OWNER S MANUAL
LSU Duct Liner Sizer LSU Duc DUCT LINER SIZER OWNER S MANUAL MACHINERY DIVISION ASSEMBLY INSTRUCTIONS IMPORTANT: DO NOT TIGHTEN THE NUTS UNTIL THE UNIT IS COMPLETELY ASSEMBLED. A) Assemble the cutting
More informationOPTIMUM MASCHINEN - GERMANY
Operating manual Version 1.3.4 Bench Drill OPTI B17 PRO OPTI B23 PRO Pillar Drill OPTI B26 PRO OPTI B33 PRO Illustration: OPTI B23 PRO 2008 Keep for future reference! GB 16 / 10 2008 Version 1.3.4 B17
More informationOperating Manual Rotary Plate DT1600
Operating Manual Rotary Plate DT1600 Manufacturer ULMER GmbH Auf den Lüppen 35745 Herborn Hörbach Germany Telephone: +49(0)2772/51000 Fax: +49(0)2772/51677 Email: info@ulmer-gmbh.de Homepage: www.ulmer-gmbh.de
More informationHIGH-SPEED GUILLOTINE 92, 115, 132, 168, 225
HIGH-SPEED GUILLOTINE 92, 115, 132, 168, 225 THE NEW TOUCH CONTROL IN WIDE-SCREEN FORMAT 16:10 Interactive user interface Basic principle of the control is the manual input via the large 18,4 inch touch
More informationCookie great Variety. Best systems for your products. Niederrheinische Formenfabrik Gerh. Janssen & Sohn KG
Cookie great Variety Best systems for your products Niederrheinische Formenfabrik Gerh. Janssen & Sohn KG Cookies Great variety The Company Niederrheinische Formenfabrik GERH. JANSSEN & SOHN was founded
More informationLSU Duct Liner Sizer. LSU Duct UCT LINER SIZER MACHINERY DIVISION OWNER S MANUAL
LSU Duct Liner Sizer LSU Duct LDUC UCT LINER SIZER OWNER S MANUAL MACHINERY DIVISION assembly Instructions IMPORTANT: DO NOT TIGHTEN THE NUTS UNTIL THE UNIT IS COMPLETELY ASSEMBLED. A) Assemble the cutting
More informationTURNING WITH HIGHEST EFFICENCY. FTC 160 Flexible Turning Center
TURNING WITH HIGHEST EFFICENCY FTC 160 Flexible Turning Center Precision hard turning of hardened gears Ultra rapid machine loader with double gripper FTC 160 Flexible Turning Center The self loading machine
More information