ALUMIG-250P/300P. Compact Synergic Pulse MIG. Strong power, Multi-functions, Superb performance and Economical choice. Features: Application:

Transcription

1 Features: Process: MMA, CO/MAG, Pulse MIG, Double Pulse MIG Soft-switching IGBT inverter system Full digitalized control system, friendly operation interface Synergic operation Precise, clean arc ignition and arc ending Embedded welding expert database, flexible parameters adjustment 0 channels memory capacity Self-diagnostic and self-protection functions Application: Thin sheet metal fabrication workshops Shipyards and offshore industry Chemical and process industry Car repairs Installation and set-up Repair and maintenance Strong power, Multi-functions, Superb performance and Economical choice is a synergic, pulsed and double-pulsed MIG/MAG welding machine, suitable for a variety of materials including Fe, FeMc, FeFc, St/St, Alu, CuSi, CuAl8 fillers wires. Simply select the filler wire type and size, then go welding. For those regular welding jobs there s even a 0 channel memory function. Tel: ( 86) Fax:(86) robin@broad.hk BROAD INDUSTRIAL GROUP

2 Technical specifications Item No Rated Input Voltage Max. Load Power Capacity Rated Duty Cycle(0oC) 60% 00% Welding Current/Voltage Range Open Circuit Voltage Power Factor Efficiency Pre-Gas Time Flow-Gas Time Wire-feed Mechanism Wire-feed Speed Range Wire Spool Capacity Filler Wires Ø (mm) Fe, Ss: FLUX CORED: Al: Dimension Weight ALUMIG-50P ALUMIG-00P PH ~ 0V -+5% PH ~ 00V -+5% 9.KVA 0.6KVA MIG: 50A/6.5V MIG: 00A/9V MMA: 50A/0V MMA: 00A/V MIG: 00A/V MIG: 50A/6.5V MMA: 00A/8V MMA: 50A/0V MIG: 0A/5.5V~50A/6.5V MIG: 0A/5.5V~00A/9V MMA:0A/.V~50A/0V MMA:0A/.V~00A/V MIG: 70V MIG: 70V MMA: 70V MMA: 70V % 80% 0-5S 0-5S 0-5S 0-5S Rollers Rollers -8 m/min m/min 00mm (5kg) 00mm (5kg) 0.6~. mm 0.6~.6 mm 0.9~. mm 0.9~.6 mm 0.8~. mm.0~.6 mm 770X50X650mm 770X50X650mm KG KG Tel: ( 86) Fax:(86) robin@broad.hk BROAD INDUSTRIAL GROUP

3 Parameter & Settings: -Rolls wire-feeder with strong feeding motor. Tel:(86) Fax:(86) BROAD INDUSTRIAL GROUP

4 General View of Control Panel Displays #, #, # Memory Settings Check Gas Synchronization Settings 5 Encoder # 6 T/T Torch Holding Mode 7 Welding Process 8 Dia. of Welding Wire 9 Wire Type 0 Process Selector Encoder # Welding process & status SELECT the Memory channel OPEN the parameter of selected memory channel 8 9 STORE the settings to Memory channel Push to Check Gas Push to select the Wire Type: Fe - AlSi - AlMg - CrNi - Cu Push to select the wire size: 0,8mm -.6mm 6 Push to select the torch handling type: ) T ) T ) S (only valid for Pulse MIG) ) "" - MMA 7 Push to select: ) Welding process: MMA, MIG/MAG/CO Pulse MIG, Double Pulse MIG. ) SETUP : push 5 seconds to clear all the memories. Tel: ( 86) Fax:(86) robin@broad.hk BROAD INDUSTRIAL GROUP

5 Displays: to show the parameters and settings DISP.: Memory of parameter records number DISP.: ) Volts: (V) ) Frequency: (Hz) ) Time: (S, 0s) ) Balance: (%) DISP.: Currents (AMP) Synergic control panel can offer large, clear meter displays and logical,useful functions that make welding easy in any situation. The simplify weld process control including selections for Fe, St/St, Al, CuSi, CuAl8 filler wires in a range of diameters. Memory channels add usability It s includes 0 memory channels to store welding values for later use. This makes it quick and easy to start welding without needing to adjust the settings once more. Best arc characteristics have superb arc performance. Excellent arc ignition as- sisted by burn back time technology guarantee satisfaction. Electronic arc dynamics control offers the best arc performance in all situations. 5 Tel: ( 86) Fax:(86) robin@broad.hk BROAD INDUSTRIAL GROUP

6 Standard accessories: MIG torch: MBKD/6KD with PA liner Duty 60%DC:50AMP CO Duty 60%AC:0AMP Electrode holder with cable M Earth clamp with cable M Optional accessories: Argon/CO gas regular with heater Output meter :-0LPM Inlet pressure gauge:80kg/000psi Out thread :M-.ORH(M) Water-cooling unit: WC-00 Operating Voltage: 0V 50/60Hz Rated Power: 60W Cooling Power:.5KW(L/MIN) Tank Volume: 6.5L Water-cooling torch: MB0D PP torch: QTLB-D/8M Carbon dioxide: 00A/50A Mixed gas: 60A/00A Duty cycle: 60% Interface style: European Interface PP torch: QTLB-6D/8M Carbon dioxide: 50A Mixed gas: 00A Duty cycle: 60% Interface style: European Interface Trolley: WT-00 6 Tel: ( 86) Fax:(86) robin@broad.hk BROAD INDUSTRIAL GROUP