Chapter 1: Virtual Manufacturing and Sustainable Manufacturing

Transcription

1 Table of Contents Preface and Organizing Committees Chapter 1: Virtual Manufacturing and Sustainable Manufacturing Method of Product Innovation Acquisition Based on Dynamic Response Particle Swarm Optimization Y.C. Yin and Y.Y. Huang 3 The Background Reconstruction Algorithm of Dynamic Updating Q.C. Bai, M.H. Wang, W. Ni and Y.L. Zhang 8 Chapter 2: Digital Manufacture and Quality Monitoring An Overview of Grid-Connected Photovoltaic Power Generating System X.S. Zhou, J.R. Wu and Y.J. Ma 15 The Review of Grid-Connected Photovoltaic Power System and its Nonlinear Behavior Y.J. Ma, Y.X. Cai and X.S. Zhou 19 The Research on Long-Term Monitoring and Controlling Effect of Scientific and Technological Innovation for Liaoning Equipment Manufacturing Industry H. Zou, Y. Zhang and A.R. Sun 23 Vibration Influence Analysis of the Reliability Test for an Undercarriagedoor Lock System T. Zhang, W.M. Cui, W. Guo and T.X. Yu 28 Study on Deformation Mechanism of Deep Soft Rock Roadway in Daqiang Coal Mine of Tiefa Coal Industry Z.B. Guo, E.Q. Li, J.W. Liu and J. Wang 34 The GLR Chart for Poisson Process with Individual Observations L. Li 42 Technology of Grid-Connected Wind Power Generation J. Li and Y.J. Zhang 47 Modal Analysis and Experiment on 2.0 MW Wind Turbine Gearbox G.Y. Wu, C.R. Jiang and Y.J. Liao 52 A Gas Detection System Based on the Micro Light Splitting Principle H.R. Wang, W. Zhang, D. Cen and M. Tian 57 Pulsating Flow Induced Vibration in a Rotor-Seal System N. Zhang 66 Application of Double-Used Absorption Heat Pump in Power Plants X.H. Cao, G. Zhang, X.L. Wang and Y.N. Zhang 70 Research on Heterogeneous Data Integration of Coal Mine Three-Dimensional Visualization Ventilation System X.Y. Wan and H. Yang 74 Selective Assembly for Components with Multiple Characteristics J. Chen, K.S. Dai and S.L. Xu 79 A Method Research to Obtain Quickly the Vibration Transmissibility of Cushioning Packaging Materials Y.H. Wang, L. Bao and H.M. Jin 87 Research of Ultrasonic Image Evaluation Based on Defect Dimension W. Dong and L. Yu 91 The Monitoring of CNC Machine Processing Condition Based on the BP Neural Network Z.Q. Sheng, J.Y. Wang, Z.P. Liu and L. Dong 95 Study of DQ Rotating Frame Control for Single-Phase Photovoltaic Grid-Connected System X.J. Zhou and Y. Ruan 99 Study on Guaranteed Measures of Construction Quality about Water-Proof and Screed- Coat of Roof Z.J. Wang 103

2 Equivalent Analysis of Elastic Constants and Stability Calculation of Corrugated-Arch Metal Roof L.T. Sun and L.S. Lin 106 The Review of Chaos Research in Power System X.S. Zhou, S.Y. Li and Y.J. Ma 111 Application of Contourlet in Research of Rough Surface Topography C. Zhou and C.H. Gao 115 Study and Analyse Hydraulic System of a Boat by Using Risk Analysis Method N. Li, Y. Gu, S.L. Xing and L. Li 119 Advanced Process Control Using Partial Least Squares S.K.S. Fan and Y.J. Chang 124 Aided Design of Precision Seeder Based on Case Based Reasoning Y. Yang 128 Real-Time Strain Monitoring and Control of Urban Bridge Cluster Monitoring System with FBG Sensor Y. Li, Y.Q. Xiang and H. Wei 132 Design and Implementation of a Remote Healthcare System Based on Wearable Body Sensor Network M.L. Qiu, C.L. Tu and X.S. Ye 138 Research on Temperature Control System with a Scaling Factor for Iron Ore Reduction Measuration D. Xie, J.L. Shi and Q.W. Yu 143 Multi-Mode Switching Control of Networked Control System Based on Hidden Semi- Markov Model Y. Yan, L.K. Wang and Y. Wang 147 Study on Application of PLC and Inverter in Blown Film Extrusion Production Line Control System X.Z. Li and Z.Y. Xie 151 Multifunctional Entire the Design Protecting the Water Supply Control Device X.L. Zhu and X.Q. Han 155 Application of Virtual Instrument on Condition Monitoring and Fault Diagnosis System of the Rotating Machinery Y.Y. Du, Y.N. Wang and M.A. Yin 161 Traffic Signal Lamp Control System Design Based on S7-200 M.R. Xing 165 A Adaptive Wireless Sensor Networks for Marine Monitoring D.H. Yang and J. Wang 169 Development of Air Flow Control System for Large-Scale Pre-Oxidation Furnace K. Yu and B. Zhu 179 On a Strengthened Hardy-Littlewood-Polya Inequality B.J. Sun 184 Existence of Extremal Solutions for Impulsive Delay Fuzzy Differential Equations in n- Dimensional Fuzzy Vector Space Y.C. Kwun, H.E. Youm, J.H. Koo, J.H. Park and J.J. Seo 188 Design of Trash Rack Water Level Measurement and Control System Based on Ultrasonic H.Y. Cheng and H. Wang 194 An Approach Based on Power Generalized Aggregation Operator to Decision Making J.H. Park, J.J. Seo, Y.C. Kwun and J.H. Koo 198 The Control Strategy of the Rotor-Side PWM Converter Based on Doubly-Fed Induction Generator M.H. Zhao, M. Fan and X.X. Wu 204 Measurement and Control System for Traction Motor Based on OPC Technology Y.S. Yang, G.S. Ren and X.Q. Yin 208 Design of Granary Temperature Monitoring System Based on Virtual Instrument Technology J. Liu 212 The Fuzzy-PID Algorithm Apply to the Constant Gas Flow Control of the Dust Sampler R.J. Li, T. Wang and C.X. Sun 217

3 b Automatic Manufacturing Systems II Sensitivity Function Based Active Disturbance Rejection Control for the Plant with Unknown Order and Uncertain Relative Degree C.Z. Zhao, R. Xu, J. Xiong and X.R. Lin 223 Using Spectrum Correction to Diagnose Mechanical Fault H.H. Qin 228 Gearbox Fault Diagnosis Based on EMD and Coefficient-Energy Value P. Wang, D.X. Zhang and Y.L. Liu 234 Gearbox Fault Diagnosis Based on Empirical Mode Decomposition and Hilbert Transform Y.L. Liu, D.X. Zhang and M.W. Ji 238 Chapter 3: System Analysis and Industrial Engineering Research on the Algorithm of Post-Processing with Space Tool Compensation Vector in Five-Axis CNC Machine W.Q. Gao, X.W. Huang, Z.H. Hu, J. Zhang, J.H. Song and H.X. Xu 245 Description Logics in Information Semantic Integration for Product Design and Manufacturing Z.M. Hu, Z.Q. Wang, N. Li and H.P. Wang 251 Resource Conflict Resolution Strategy in Collaborative Design Environment H.T. Li, B. Yang, W. Wang and C.Q. Gao 255 The Exploration of Recycling of Industrial Products Based on Modularization L. Liu 261 The Status of the Mold and Green Manufacturing in China M. Han, H.G. Zhou and D. Zhou 267 The Recycling of Plastics from ELVs - Background, Practices and Potentials F. Gu, P. Hall and T. Wu 271 Evaluation Model of Product Manufacturability for Rapid Response Design T.J. Shu and X.Q. Zhong 281 Research of Engineering Change Analysis Y.Z. Fang, X.X. Guo and J.H. Chen 285 The Impact Analysis of University R&D on High-Tech Industry Development Based on PLS Method X.P. Ma and J. Zhou 289 An Effective Dynamic Evolutionary Algorithm for Engineering Problems Q. Zhang, S.Y. Zeng, H.Q. Ye, Z.J. Li and H.Y. Jing 294 Implementation of the Lean Model for Carrying out Value Stream Mapping and SMED in the Aerospace Engine Case Production C.H. Wang, J.H. Kao and S. Kumar Thakur 302 Disclosure of Internal Control Based on XBRL H.M. Chen and F.G. Li 311 Research on Manufacturing Execution System W.Z. Gao, Y.L. Zhu and Y.S. Gu 315 Based on Industrial Engineering Production System Analysis and Improvement Research L. Zhao 320 Performance Analysis of in-out System of Railway Container Terminal Based on Fuzzy Queuing Model B.K. Lin and W.M. Cheng 324 Survey of Development and Technology of Smart Grid X.S. Zhou, B. Shang and Y.J. Ma 328 Application of Electronic Display Systems for Visual Management in SMEs X.F. Chang 331 A Study of Knowledge Transfer on Flexible Manufacturing Capability and Manufacturing Performance J. Zhou and Y. Liu 335 The Facilities Plan and Project Management Based on the Optimize Correlation of Logistics and Production Construction T.X. Yang 339

4 Advanced Materials Research Vols c RFID Technology in Garment Production Line Management Application C.N. Li and Q. Zhao 344 Optimization Retrieval for Manufacturing Resources Based on Interval Number Z.M. Zhao and A.H. Peng 349 Application of HAZOP Method in the Design of Shallow Water Catheter Frame Platform Y. Wang, Q. Zhao, B.Y. Huo and Z.W. Cai 353 Two-Stage Supply Chain Inventory Coordination Strategy with Supply-Hub Operation Mode S.Y. Li, D.Z. Zhang and F.P. Jin 358 Manufacturer Technology of Dense Chinese Fir Laminated Veneer Lumber (LVL) C.Q. Yao, L. Yu, Y.J. Li, S.K. Xu and L.X. Du 363 Approach for Flow Shop Scheduling Based on Petri Net B.Y. Yan and P.J. Li 367 Innovating the Mode of Engineer Training and Promoting the Training Program of Excellent Engineers X.W. Miao, Y.Q. Gu and K.R. Zhang 371 A Cutter Production Management System Based on the Hybrid Architecture of C/S and B/S Z.Y. Wu, X.P. Wu, L. Li and N.B. Liu 377 The Research of Automation Management Based on Configuration Technology Y.L. Luo, Y. Guo and X. Qiu 381 VaR-Based Job Shop Scheduling Model and Algorithm Y. Yu, C.W. Wang and J. Zhu 386 Production Efficiency Promotion Model of Multi-Product and Small-Batch Machinery Manufacturing Enterprises Y.F. Chao 390 Intelligent Inspection System on Information Equipment in Smart Grids Based on IOT P.P. Fu, X.W. Chen, Z. Liu, Y.Q. Chen and L. Zhu 394 Assembly Process Modeling Based on Hierarchical Tree Z.H. Rao, J.Z. Gong, G.X. Li and B.Z. Wu 398 Study of Assessment Model of Packaging via AHP Method G.F. Gong, K. Yin and M. Lan 403 Approach for Multi-Objective Flexible Job Shop Scheduling H.J. Hui 407 The Quality Prediction in Small-Batch Producing Process Based on Weighted Least Squares Support Vector Regression C.Y. Yan and Y.J. Yu 411 A 16Kb SRAM with Programmable Replica Bitlines for Dynamic Voltage Scaling Systems M.Q. Qiu, N. Bai, J. Meng and J.N. Chen 416 Dynamic Investment Risk Assessment Model for Intelligent Control Firms Y.J. Kiang 423 Study on Planning and Design of Production Facility for Bearing Manufacturing Industry Based on SLP Z.X. Huang and H. Luo 428 Chapter 4: Supply Chain and E-Commerce System M&A: A Management Method of Supply Chain W.P. Huang 435 Study for Inventory of Supply Chain on the Basis of Newsboy Model D. Li, S.C. Lu and S.W. Liu 439 Research on the Data Integration Technology Based on RFID of Supply Chain D.G. Chen and S. Yin 444 The Technology Structure Study on E-Commerce and Logistics System Integration of Household Appliance Manufacturers S.W. Ji, K. Wang and W.L. Wu 448 Research on Layering Model in the Service-Oriented Network Management Architecture H. Yan and P. Yu 452

5 d Automatic Manufacturing Systems II Optimization of E-Commerce Logistics Process of Automobile Manufacturing Enterprise Based on ARIS S.W. Ji, C. Chen and W.L. Wu 457 Research on the Framework of High Performance the Internet of Things Based on Multilevel Disaster Recovery H.Y. Ju 462 The E-Commerce System and its Evaluation of Manufacturing H. Liu and C.M. Wang 469 The Design and Implementation of Web Service Based on Axis2 Z.M. Zhang, M. Yu and X.Y. Xiong 473 Chapter 5: Computer Aided Manufacturing Engineering Use PLC to Optimize Electrical Control System of Gear Processing Machine S.L. Zheng and G.H. Li 481 Research on Network Manufacturing Resources Optimization Deployment X.N. Song, S.A. Sun and H.C. Liu 485 A Direct Approach for Loop Subdivision Surface Offset Approximation T.T. Chen, W. Wang and G. Zhao 495 An Overview of STL Model Offset H. Zhu, X.Y. Jing and P. Zhang 499 Calling Method of Process Sheet in Interactive Round-Hole Broach CAPP System Y. Wang and M. Wang 503 An Online Prediction Model for BFG Output in Steel Industry X. Zhang and J. Zhao 507 Discussion on Equipment Acquisition System Modeling Y.M. Wu and K. Guo 513 Finite Element Analysis of Deformation of the Multipoint Flexible Clamped Thin-Wall Component during Machining G.Q. Cao and Y.Y. Sun 519 The Research of Machining Process Design Based on Manufacturing Resources in MBD Mode Y. Yang, M. Rong and W. Neng 523 Application of Proteus Simulation for the Stepper Motor Control in Experimental Teaching W. Wan 528 Achieve of Torpedo Shell Parameter Model Based on Secondary Development of UG N. Li and Y.P. Zhao 532 Computing Offsets of NURBS Curve and Surface Y. Yue and J. Jia 537 Adaptive Sampling Strategy for Free-Form Surface Based on CAD Model G.Y. He, H.Y. Jia, L.Z. Guo and P.P. Liu 541 Chapter 6: Mechatronics Design of High Dimensional Nonseparable Compactly Supported Wavelets with Special Dilation Matrix L. Li 547 Method for Feed-Rate Optimization Based on S Curve Acceleration and Deceleration Control of Piecewise Tool Path X.B. Chen and W.H. Liao 551 Application of Full-Digital Servo Valve in Auto-Discharge Control System for the Jig Q.M. Jia, J.J. Tai and B. Xu 555 Application of Straightness Error Based on Virtual Instrument in Experiment Teaching W. Wan 559 Application of Single Neuron Adaptive PID Control in Electro-Hydraulic Position Servo System C.Y. Yan and Y.J. Yu 563

6 Advanced Materials Research Vols e The Applied Research of Four Polynomial Acceleration and Deceleration Control Method in Multi-Axis DSP Motion Controller J. Zhang, W.Q. Gao, Z.H. Hu, X.W. Huang and J.H. Song 567 Space Arc Trajectory Planning Based on PCI Motion Control System J.Z. Zhao, M. Xu and W. Fu 573 The Residual Life of Shipboard Cable Forecasting Based on PSO and GM(1, 1) Y. Wei, Y.C. Liu, C. Wang and G. Chen 578 Multi-Signal Generator Design X.Q. Han and X.L. Zhu 584 Improvement of Wind Speed Measurement Model by Meteorological UAV and System Design S.D. Zhou, Y.Q. Jin, Y.Q. Wang and M. Wang 591 The Designation of Programmable Direct-Current Voltage-Stabilized Source Based on Micro Controller Unit Z.H. Feng 595 CSDA a Routing Protocol Based on Secure Data Fusion for Wireless Sensor Network Y.Z. Jiang, Z.M. Yao, Y. Zhang, D. Wu and J. Dong 600 Development of a GUI Application for the Safety Performance Test of Outdoor Fitness Equipment Using C# F. Zhang, L.P. Zhang and T.J. Wang 604 Monitoring System Design of High-Speed Carton Packaging Machine Based on PCC and Servo Control H.M. Wang, J.R. Ye, M. Liu, F.W. Lin, W. Chen and F. Chen 609 The Segmentation Method Based on Fusion Algorithm of Transition Region Extraction for Coronary Angiograms W.W. Kang, X.T. Kang and B. Liu 616 Preparation and Properties of Sensing Membrane for Fiber Optic DNA Sensor H. Fang and Y.R. Wang 620 Research of Ballistic Missile early Warning System M.H. Zhang and Y.Y. Zhang 625 Research on Nozzle Array Structure Fluidic Gyroscope Zero Temperature Compensation X. Wang, L.H. Piao and Q.G. Yu 631 Precision Comparison of 3D Measurement System Based on Stereo Vision K. Zhang and Z. Gao 635 A Method of Detecting Circle by Improved Hough Transform X.F. Wu and Y. Fan 639 An Improved Clustering Algorithm Based on Coverage Area for Wireless Sensor Networks L.J. Chen 643 Development and Application of CISDI Online Slab Quality Diagnosis & Analysis System S.G. Wang, K. Feng, Z.W. Han, Y.W. Kong and J.F. Cao 647 Crosstalk between Nb Superconducting Coplanar Waveguide Resonators N. Zhao, J.S. Liu, H. Zhao, H. Li, T.F. Li and W. Chen 653 Study on Infrared Thermal Wave Inspection Technology Using Linear Frequency Modulated (LFM) Light Excitation L.Q. Liu, J.Y. Liu and Y. Wang 659 Dynamic Analysis on the H-Type Stage Using Largrange Method K. Kim, D. Gweon, D. Hong and B. Lee 663 Research on High Precision Testing System for Roller Gear Cam Indexing Driven W. He 667 Stress Amplification Sensing Effect of Holes on Cross-Fiber Composite Simplified from Chafer Cuticle G.Z. Quan, Y. Tong and Y.Y. Liu 671 Dynamic Performance Experiment and Fuzzy PID Control Method Study on MRF Engine Mount S.J. Hou, W.K. Shi, M. Yang and H.S. Li 675 Implementation of LabVIEW Based Embedded Control System for FAIMS on a Single Chip ARM D.L. Wang, C.L. Chen, C. Zhao, Y.J. Liu, R. Chen, D.Y. Kong and H. You 679

7 f Automatic Manufacturing Systems II Global Calibration Method for a Multi-Sensor Measurement System Based on Structured Light Stereo Vision J.Y. Lin, K.Y. Jiang, C.B. Huang and B. Liu 684 A Study on the Recognition of Low-Resolution Motion Visual Image J.C. Zhang, H.B. Song, X.Y. Li and C.H. Lu 690 Error Analysis of a Novel Resolver-to-Digital Converter W.J. He, X.W. Xu and Z.K. Shi 695 A Clock Soft Synchronization Method Based on CAN Bus and Synchronization Error Analysis J. Jiao and F.F. Chen 699 Airborne Precision Image Stabilizing Method Based on Dual-Mode Stabilization Mechanism B. Ren, L. Guo and T.Y. Zhao 705 ISP Technology s Application in Remote Upgrade for the Intelligent Instruments J.Y. Wang and S.Z. Li 711 The Design of High-Speed Synchronization Data Collection Node Machine for Multi-Chip CCD Measurement K.F. Xiang and L. Li 717 Resistance Measurement Design of the Battery Based on LabVIEW G. Li, Y.C. Xie, G.S. Li and N. Wei 723 Study on Nozzle Array Structure Fluidic Gyroscope C.Z. Mei, L.H. Piao, Q.G. Yu, B.L. Zhang, X. Ding and X. Wang 727 Study on Improving Resolution of Fluidic Gyroscope C.Z. Mei, L.H. Piao, Q.G. Yu, B.L. Zhang, X. Ding and X. Wang 731 Uncertainty Analysis and Simulation of Coordinate Measuring Definition W. Wan, B.Z. Wu, J.Z. Yang, G.X. Li and P. Zhang 735 Review of Acupoints Positioning and Tracking Technology for Chinese Massage Robot C.Z. Hao and F. Han 741 Training Multi-Layer Perceptrons with the Unscented Kalman Particle Filter Y.H. Xi and H. Peng 745 Research on the Vessels' Routeing System and Ship Reporting System off Cheng Shanjiao Z.Z. Fan, Z.L. Zhao and C. Zhang 749 Chapter 6: Mechatronics Study on the Speed Control System of Hydraulic Pump-Motor Based on PID Neural Network D. Wu, J. Yao and Y.J. Huang 759 A Study of the Effect of Absorbing Materials in the UHF Sensor H.F. Guo, M. Fu, J.F. Tang and C.X. Xu 765 An Offset Reduction Technique for Latch Type Sense Amplifier in High Performance and High Density SRAM Q.L. Yu, N. Bai, Y. Zhou, R.X. Li, J.N. Chen and Z.P. Li 769 Research on Safety Monitoring System of Mine Hoist Based on VB X.S. Zhang and M. Hu 775 Person Following of a Mobile Robot Using Kinect through Features Detection Based on SURF W.M. Chen and S. Guo 779 Development of Vehicle Airbag Ignition Algorithm Based on Power-Rate Method Z.H. Bai, P.P. Xu, Y.L. Wang and X.G. Zhou 785 Motion Control of Welding Robot Based on ADAMS and ACR-9000 Y.Z. Du, X.L. Ping, L.G. Chen and W.B. Xu 789 A High Resolution Vernier Ring Oscillator with Ultra-Low Temperature Drift R.H. Liu and C.H. Shen 795 Weighted Multi-Sensor Data Fusion Based on Fuzzy Kalman Filter for Seam Tracking of the Welding Robots J. Du, M. Sun, L. Hua, J.S. Ge and J.P. Gu 800

8 Advanced Materials Research Vols g Research on Nozzle Array Structure Fluidic Gyroscope Sensitivity-Temperature Compensation X. Wang, L.H. Piao and Q.G. Yu 806 The Movement Interference Research of Connecting Rod Manipulator Based on Virtual Assembly Technology Y.Y. Yao and C.J. Lv 810 Review on Key Technologies of Infrared Thermal Wave Detection Technology in Parts Defects J.M. Zhou, L.J. Fan and R.F. Zhang 814 Based on the LabVIEW Frequency Modulation Continuous Wave Radar Signal Acquisition and Processing H. Wang, Q. Li, H. Li, Q. Zeng and W. Liu 818 Analysis and Control on Winch Rope-Aligning Motion of Well Testing Truck Y. Yang, Y.C. Xiong and R.Q. Yang 822 Research on Calibration Method of Tire Dynamic Balance Detection System J.F. Yang, X.Y. Feng, H.J. Fu and L.F. Zhao 828 Research of Feature Extraction in Mongolian Speech Based on an Improved Algorithm of MFCC Parameter Chomorlig, Z. Zhang and Y.L. Xiang 833 Design and Analyze Device QCM-DEP Chip Seprarating Nano Particles Y.C. Chen, C.H. Chien and Y.S. Lin 838 Research on Nozzle Array Structure Fluidic Gyroscope Signal Compensation Circuit X. Wang, L.H. Piao and Q.G. Yu 842 Design of Embedded and Miniaturized Multilayer LTCC Hairpin Bandpass Filters X.W. Gu, X.A. Bao, C.H. Yu, X.W. Li and L. Cao 846 Study of Edge Detection of Printed Circuit Board Photoelectric Image Based on Multi-Scale Wavelet Transform N.S. Qiao and J. Tang 850 Research on Vector Control of PMSM Based on Three-Level NPC Inverter-Fed C. Chen and Y.Z. Ye 854 Design of Automatic Test Software for Electromagnetic Radiation Safety Margin H.Y. Liu, Z.Y. Mao and H. Xu 859 Design of Embedded MRFD Controller W. Xiong, Z.H. Kong and G.H. Sun 865 QoS Routing Algorithm Based on Multi-Parameter Constraints for Wireless Sensor Networks L. Lin and Y. Nian 869 Controllability Analysis of Flexible Variable Sweep Control Wing L.B. Xu, S.X. Yang and B. Mo 873 Research on Nozzle Array Structure Fluidic Gyroscope Signal Extraction Circuit X. Wang, L.H. Piao and Q.G. Yu 878 Differential Translational Gripper with Double-Claw of Manipulator Driven by Combined Cylinder X.M. Sheng and F.J. Sun 882 Analysis of Workspace for the 4-PUU Parallel Manipulator C.S. Zhang 886 Research Progress of Materials and Fabrication Technologies of Microfluidic Chip Y.Q. Cheng, L. Yang, C.L. Guo, Y. Zhou and Y. Yang 891 A Simplified Model of Inertial Navigation System for Underground Pipeline Track Instrument Y.Q. Zhang, G.Y. Lu and X.M. Wu 895 High-Sensitivity Refractive Index Sensor Based on Simply Fabricated Single Mode Fiber Tapers Y.W. Zhou 901 The Detection and Control of Tape Deviation in Winding Process L. Yan, Y.Y. Shi and R. Mo 905 Design of the Automatic Sorting and Palletizing Manipulator for Passenger Car Tire after Be Tested H.M. Cai and L.F. Zhao 910

9 h Automatic Manufacturing Systems II Control System Design of the Automatic Sorting and Palletizing Manipulator for Passenger Car Tire X.D. Sun, L.F. Zhao, T.T. Niu and H.M. Cai 914 Automobile Controller Development Based on dspace Y.X. Wang and B. Zhang 919 Research on Fluidic Gyroscope Signal Processing Circuit X. Wang, L.H. Piao and Q.G. Yu 924 Design and Application of Time-Domain Transmission Moisture Content of Crude Oil Sensor C.Y. Xiong 928 Detection Research on Weak Stress Wave in Rock-Soil Based on Quasi Distributed Optical Fiber Sensing Technology C.F. Sun, Z.H. Li, S.M. Jiao, X.M. Wang, C.H. Wang and X.G. Xu 933 Pedestrian Detection Based on Histograms of Oriented Gradients in ROI P.S. Ge, G.K. Xu, X.C. Zhao, P. Song and L. Guo 937 Fault Detection System and Reliability Analysis for Chain-Type Tool Magazine Y. Hu, Z.J. Yang, X.M. Zeng, P.F. Song, Y.P. Ma, Y. Wang and Q. Lou 941 Study of Silicon Substrate Microspheres Reactive Ion Etching Technique D.S. Peng, Z.G. Chen and C.C. Tan 945 Design of Servo System Intelligent Control Chip Based on FPGA H. Zhu, M.L. Wang, W. Su and H.J. Liu 949 Research on the Electronic Tunneling in Asymmetric Dual-Quantum-Well X.Z. Bu, J. Wang, J.L. Shi and H. Zhao 953 Determination of DMMP Using a Polymer Coated QCM Sensor W. Li, X.Y. Wen, S.M. Li, X. Wang, J.Z. Wang and H. Tang 959 Study on Track Control to the Multiple Degrees of Freedom Mechanical Arm of the Sampling Machine for Coal at Railway Carriage Z.X. Tong, L.C. Shi, J. Yang and L.G. Zhang 963 Design of an Authentication System Based on Face Recognition and the Second Generation ID Detection P.W. Han, C. Ji, S.M. Wang, D.X. Zhang and D. Yang 968 Logical Structure Analysis of Intelligent Measurement and Control System Basic on Personification Theory X.D. Liu, Y.R. Li and B.Q. Yang 972 The Optimization of Wire Bonding Parameters and Quality Prediction Model Based on Neural Network X.D. Guan, G. Chen and W.L. Liang 976 Improvement of Two-Stage Camera Calibration X.M. Zhang, S.W. Song and Q.J. Pan 981 Optimal Design of a 6-DOF Motion Simulator Based on Formulating Dynamic Index G.J. Liu, S.T. Zheng, X.C. Liu and J.W. Han 985 The Device Design of Driving Cars Astern Based on the Wireless Sensor Networks Node Z.H. Xin, H.M. Lu, L.Y. Hu and J. Zhou 989 Research on Nozzle Array Structure Fluidic Gyroscope Sensitive Principle X. Wang, L.H. Piao and Q.G. Yu 993 A Novel Single-Ended Flyback High Frequency Regulated LED Driver Power Supply J.J. Zhang, X.S. Fu, P.J. Niu and Y.L. Liu 997 A Circuit for Robustness Enhancement of the Subthreshold SRAM Bitcell in 65nm Technology B.T. Lv, R.X. Li, J. Zhu, N. Bai and X.L. Wu 1001 Control System Modeling for Automotive Brake Test-Bench Based on Improved PID Algorithm J.X. Du, H. Shen and Y. Feng 1007 A New Multi-Focus Image Fusion Algorithm Based on Contrast Ratio and Discrete Wavelet Frame Transform Z.H. Deng, M.J. Wang and X.P. Bai 1011 A New Iterative Method with Sixth-Order Convergence for Solving Nonlinear Equations H. Li 1019

10 Advanced Materials Research Vols i Driver Study of Touch Screen Based on S3C2440 and Embedded Linux C. Guo, J. Zhang and Y.F. Zhi 1023 A Novel Design of the Device for Measuring Draw and Plug Forces Y. Hu, Z.J. Yang, M.J. Xiang, Z.C. Qiu, C.G. Yang, P.F. Song and X. Qiu 1029 Lightning Flash and Lightning Performance of Transmission Lines J. Li 1033 Development and Design of LonWorks Intelligent Nodes S.Y. Zhi and A.B. Gao 1037 Generating the New Chaotic Attractors of the Lorenz System Family via Anti-Controlling Method X. Deng 1042 Study Surveys on Image Segmentation of Plant Disease Spot Z.H. Diao, Y.M. Song, H. Wang and Y.P. Wang 1047 Chapter 7: Transmission and Control of Fluid Numerical Study on the Flow Structure of a Steam-Jet Vacuum Pump at Different Throat Length X.C. Dai 1053 Storehouse Seepage Analysis during the Construction and Operation Period B.R. Huo and C. Yu 1057 A Study on Three-Dimensional Seepage of Dam on the Deep Pervious Fracture Rock Foundation H.T. Mao and X.J. Wang 1061 Study on the Improvement of Measurement Range of Fluidic Gyroscope B.L. Zhang, L.H. Piao, Q.G. Yu, C.Z. Mei, X. Ding and X. Wang 1065 Numerical Modeling of Fluid Flow in RH Vacuum Refining Process J. Yuan, Q.M. Chang, X.L. Chen and Y.K. Yang 1069 Frost Growth Simulation in Cryogenic Vertical Pipe Flow K.B. Lee, Y.H. Kim, H.Y. Kim, W.G. Lee, K.I. Chai, S.H. Rhi, N.K. Kim and D.R. Shin 1074 The Numerical Simulation of Flow Characteristics in T-Type Pipe Y.Q. Zhu 1079 Study on Drilling Fluid Technology of Eliminating Bit Balling by Changing Wettability C. Ma, Y.P. Yang and L. Li 1083 Solid-Liquid Coupling Mechanism Research in Seepage Field and Stress Field of Fractured Rock Mass H.T. Mao and X.J. Wang 1087 Simulation Analysis for Hydraulic Clamping Force of Bidirectional Hydraulic Lock' Valve Spool Based on Fluent Q.L. Zeng, J. Cui and W.M. Zhao 1091 Influence of the Outlet Aperture of Sensitive Chamber on the Stability of Fluidic Gyroscope B.L. Zhang, L.H. Piao, Q.G. Yu, C.Z. Mei, X. Ding and X. Wang 1096 Design of the Dry-Mixed Mortar Truck in Avoiding Segregation L. Zheng, L.N. Guo, H.C. Ji and Y.G. Li 1100 Research on Pressure Drop Transfer Standard Based on CFD Z.C. Jiang, X. Ding, H. Zhao and Z.D. Su 1105 Initial Seepage Field FM Analysis B.R. Huo and C. Yu 1109 Numerical Study of Fluid Mixing in a Microchannel with a Circular Chamber on a Rotating Disk H.C. Chiu and J.M. Chen 1113 Study on the Pendulum Characteristic of Nature Convection in Dimensional Enclosure C.Z. Mei, L.H. Piao, Q.G. Yu, B.L. Zhang, X. Ding and X. Wang 1120 Establishment of Valve Control Mathematical Model of Hydraulic Differential Cylinder Y. Xin, Y. Yao, M. Liu and W.Y. Zhang 1124 Research on Optimization of Tundish Flow Distrbution W.F. Gao, J.J. Zhang, Z.G. Peng, W. Li, J.P. Wu, J.P. Wang and Y.H. Pan 1132

11 j Automatic Manufacturing Systems II Chapter 8: Mechanical Control and Information Processing Technology Fuzzy Fractal Interpolation Surface and its Applications X.P. Xiao, Z.S. Li and W. Gong 1141 A Comparison between Vector Control and Direct Torque Control for the Marine PMSM Y.T. Zhao, Y.C. Liu and J.J. Ren 1145 AUV Rolling Motion Control in Inland Rivers Based on Sliding Mode Control Improved by Artificial Immunity Algorithm Q.M. Li, S.R. Xie, J. Luo and J.F. Shi 1150 Chapter 9: Micro-Electronic Packaging Technology and Equipment CNC Machine Model of Epicycloid Bevel Gear and Cutting Experiment Based on Formate Method S.W. Nie, X.Z. Deng and J.X. Su 1157 Development and Application of Open CNC System Based on DMC Motion Controller Z.W. Ren, M. Song and L. Yang 1163 A Line and Arc Transition Tool Radius Compensation Algorithm for Convex Contour C. Wang, S. Lin and Q.H. Peng 1167 Research of Embedded Open Soft-CNC System Based on Omponent O. Xie, Y.S. Liu and Z.Y. Cao 1172 The Working Methods of the Servo Cam Grinder and its Accuracy Compensation Strategy X. Wu, X.H. Huang, W.G. Huang and X.H. Pan 1176 A Brief Analysis of NC Machine Tools Networking Z.F. Li and J. Xu 1182 Development of STEP-NC Based Manufacturability Evaluation System Q.L. Shu and S.T. Li 1185 Approach to Machining Setup Process Planning of NC Machine Tools Based on Graph Theory G.Z. Zhang, J. Han and Y.Y. Liu 1190 Design and Application of NC Machining Template under NX/CAM Environment Q. Chen and L.Z. Liao 1196 Log-Linear Process Modeling of Reliability Assessment for Numerical Control Machine Tools Z.M. Wang 1200 Research and Simulation of an Efficient Circular Interpolation Algorithm X.L. Yan, W.L. Wang and N. Xue 1204 New Numerical Control System for Machining Based on Dual MCU X.H. Zhang 1209 Adaptive NURBS Interpolation with S-Shape ACC/DEC Control J.F. Tian, H. Lin, Z. Yao and J. Li 1213 Reliability Assessment Test Design for Numerical Control Machine Tools Z.M. Wang 1218 Smart Charge/Discharge Management System of a Portable Computer with Dual Batteries Y.B. Lv, B.Z. Xia and W.W. Zheng 1222 Compensation Strategy Research in Dynamic Voltage Restore Y.J. Ma, Z.H. Sun and X.S. Zhou 1227 Single-Phase Double-Stage PV Grid-Connected System Based on Multi-Carrier PWM G.S. Zhou, Y.J. Lin, Y.C. Liu and Q.J. Zhang 1231 Research on Identification of Narrow Bandwidth Q. Qiao, W. Tang, B. Bao and Y.X. Cheng 1238 Calculation of Single Conductor Capacitance by Estimating the Electrostatic Field Y. Chen and J.S. Yuan 1242

12 Advanced Materials Research Vols k Chapter 10: Computer Application Technology The Effect of Crossover and Mutation Operators on Genetic Algorithm for Job Shop Scheduling Problem L. Xu and W.B. Hu 1251 Automobile Braking Simulation Applied Research Based on ADAMS Y. Wang and H.T. Zhu 1260 Virtual Manufacturing Technology and its Application in Furniture Manufacturing Enterprises W.M. Zhang 1264 The Digital Protection of Minority Architectural Culture Heritage J. Song and H.M. Huang 1268 Enterprise Asset Management Platform under Cloud Computing Mode Y.B. Song and Z.Y. Jiang 1271 ASTVA: DDoS-Limiting Architecture for Next Generation Internet W. Wei, Y.J. Xia and Y.B. Dong 1275 Design of WebGIS Application Based on Ajax X.J. Chen, X.Y. Li and Y.S. Zhan 1282 Component Based WebGIS Development Framework X.J. Chen, X.Y. Li and Y.S. Zhan 1286 An Improved Orphan Nodes-Reduced Mechanism in ZigBee Network D. Liu, Y.L. Gao and Y. Liu 1290 The Network Management Data Model s Design and Implementation in Communication Field Y.G. Chen 1298 Rice Edges Detection Based on Canny Operator Y.J. Qian and Y. Fan 1302 Pulmonary Nodules Detection in CT Scanned Images Based on Optimization Region Growing and MCSVMs J.R. Zhao, Q.Z. Wang, X.G. Wang and J. Zhou 1306 Wireless Communication Technique Applied to Coal-Transport System W.P. Liang and Z.G. Zheng 1311 Segmentation Algorithm of Traffic Prohibited Area Based on Wavelet W.D. Zhao, H. Qi and H.Y. Zhou 1316 Study on the Reconstruction of Three-Dimensional Bed Model and Visualization S.H. Liu, X.H. Wang and H.Q. Ji 1320 Chinese Connected Word Speech Recognition Based on Derivative Dynamic Time Warping Z.G. He and Z.M. Liu 1324 Design and Development of Web-Learning Platform Based on Multimedia Technology X.L. Zhu, J.H. Zhang, K.Y. Xiao and Z.M. He 1330 Urban Water Consumption Forecasting Based on Projection Pursuit Z.H. Wang, C.G. Xuan and Q. Fu 1334 The Design of Fingerprint Identification System Based on TMS320VC5402 X.H. Su, L.Q. Yin, L. Gao and Z.X. Zhang 1339 Two-Dimensional Orthogonal Unsupervised Discriminant Projection X.Z. Liang, Y.E. Lin and J.Z. Li 1343 Using a Multilayer Perceptrons Neural Network and Genetic Algorithm to Predict the NTD/USD Exchange Rate H.C. Huang 1347 Domain Decomposition Method for the Variational Inequality of the Second Kind J.H. Zhu and C.R. Cheng 1353 Analysis Artistic and Performance Applications of Oracle J.Q. Guan and J. Hu 1357 DOA Estimation of Surface Vessel under Correlated Noises Using Vector Hydrophone Array G.J. He, J.F. Cheng and J. Xu 1362

13 l Automatic Manufacturing Systems II Wind-Wave Numerical Prediction Model in East China Sea X.S. Pan, R.J. Li, Y. Li, C.H. Li and W.Y. Zhang 1366 Infinite Matrix Transformation of a Class of Operator J. Gu 1371 Supervised Clustering Algorithm for University Student Learning Algebra J.M. Yih 1376 Summary on Research of Agent and Multi-Agent System Y.J. Ma, F.T. Kong and X.S. Zhou 1380 Based on the Visual Modflow Surge Water Numerical Simulation Study L. Wang and Y. Liu 1384 Research on Queue Scheduling Algorithm Modeling and Analysis H.H. Shi, X. Xu, Y.J. Wang and Y.Y. Yang 1390 Application of Neural Network Based on Genetic Algorithm to Predict Hypotension Events during Spinal Anesthesia Y. Qiu and H.J. Dai 1394 Neural Network Algorithm for Solving Large Scale Travelling Salesman Problems G.Z. Cheng, W. Feng, F.S. Cui and S.L. Zhang 1398 Some Extensions of Hilbert-Type Inequalities B.J. Sun 1403 Research and Development of Automatically Generating and Editing Software for Ventilation Network Drawings F.B. Liu 1407 The Teaching Application of Systemview in Error-Controlling X.H. Su, Z.X. Zhang, L.Q. Yin and L. Gao 1413 A Density Functional Theory Study of Gd 8 O 12 Cluster Q.X. Gao, L. Xu and B. Wu 1418 Research on Automatic Generation Technology of Structural Net and Speed Diagram L. Li and Z.Y. Wu 1422 The Implement of a Flooding Information System C.C. Cheng, Q. Qiu and G.T. Lee 1426 Research and Application on the Visualization Algorithm of Wheel-Rail Contact W.L. Xiang, X.G. Luo and Y.B. Bi 1430 Rendering and Comparing Research of 3D Julia Sets Based on CPU/GPU X.P. Xiao, Z.S. Li and W. Gong 1434 Multiclass Kernel Function Evaluation T.H. Wang, C.Y. Cai and Y. Liao 1438 Neural Network Computing Based Text Mining and its Application Y. Hu 1443 The Research of Dynamic Encryption Algorithm H.W. Xue, S.Q. Shen, L.N. Zhu and Z. Guo 1447 Dynamic Encryption Algorithm Based on Ergodic Matrix Q. Wang, Z. Guo, J.R. Zhang and Q.G. Zang 1451 Clustering Methods Evaluation as Well as its Application to Highway Traffic Research L.F. Chen, Y.B. Zhang, G. Wu and J.Q. Chen 1455 Ontology-Driven Requirements Elicitation Based on Scenario Z.J. Fan and Z.L. Jiang 1459 Random Censored Data MLE of Weibull Distribution Based on Simulink J.Z. Shi, R.N. Shao and X.F. Li 1463 Heterogeneous Strategy and its Application in an Improved Micro-Genetic Algorithm L.W. Yan and Y.Y. Chen 1467