Chapter 1: Mechanics and Dynamics, Applied Mechanics, Advanced Development in Manufacturing and Industry Engineering

Transcription

1 Table of Contents Preface Chapter 1: Mechanics and Dynamics, Applied Mechanics, Advanced Development in Manufacturing and Industry Engineering The Application of Derivative in the Field of Manufacturing and Mathematical Modeling Y.W. Yan 3 Rear Female Dummy Submarining Research Base on C-NCAP Regulation H.T. Zhu, Y.H. Zhong and Y. Ji 7 Effects of Ultrasonic Impact Treatment on Performance of Armor Steel Welded Joints G.Z. Li, X.Y. Zhou, Y. Wang, Y.F. Huang and W. Zhang 12 Truck Door Slam Fatigue Finite Element Analysis and Experimental Research S.Y. Liu, X.Z. Yu, H. Huang and X. Qiu 17 The Study on Continuous Braking of Heavy Vehicle P. Wang, L. Wei and W.F. Yuan 21 The Disfigurement Repairing of Centrifugal Foundry Cast Iron Roller Ring Face J.H. Yao, B. Shao and Y.F. Gao 25 The Nature and Design of No Quick Return Peculiarity of Crank Rocker Mechanism X. Ma and Y.F. Gao 29 Analysis on Stress State of Box-Girder Web under Prestressing B.J. Zhao, G.R. Zhu and L. Yin 33 Research on Friction Hot Forming Technology of Hydraulic Cylinder Y.M. Gao, J. Li and J.H. Yao 37 Manufacturing Enterprise Suppliers Selection Based on Improved TOPSIS Method Y. Liu, P.L. Zhang and H.G. Liu 41 The EBOM of Chemical Tower Based on UG J.C. Zhang and Q.G. Chen 45 Structural Analysis of Complex Aluminum Alloy Structural Component X.W. Yin, W.X. Qian and L.Y. Xie 49 Numerical Simulation and Experimental Study on Vibration-Decreasing Function of the Barrier Holes Z. Lei, Q. Kang, M.S. Zhao and E.A. Chi 53 Research on Spatially Statically Indeterminate Parallel Force System of Rigid-Flexible Coupling Structures X. Wang, S.J. Ming, D. Wu and Y.G. Liang 60 Numerical Simulation of Aluminum Extrusion Process Using Body-Fitted Grids Based Finite Volume Method Y.J. Zhang, X.F. Gong, R. Wang and X.Q. Feng 64 Rapid Design of Injection Molding of Plastic Buckle R.X. Li, Z. Wang, D.M. Su, X. Ye, Y.N. Xu, Z.J. Sun and X.L. Li 69 Long Voyage Vessel Data Warehouse Design and Application D.D. Chen and Z.G. Yao 73 Research on Underwater Vehicle and Tail Gas Mass Coupling Process Z.S. Li and X. Zhao 77 Study on Extraction Process of Technics of Litsea Cubeba Oil Z.R. Liu, Y.F. Zhang, Y.G. Bi and H.L. Li 81 FEA-Simulation of Automobile Sheet Metal Hemming Process J.G. Lin, G.R. Zhou, J.Q. Wang, Y.W. Huang and Q.H. Wang 86 The Experimental System Design on Heat Transfer and Flow Characteristics of Rotary Air Preheater J.Q. Gao and X.P. Gu 90

2 Analyzing the Effects of the Hollow Bars on Compression Experimental Setup Using Numerical Methods R.A. Javed, S.F. Zhu, C.H. Guo and F.C. Jiang 94 Numerical Investigation of the Stress Wave Propagation in the Incident Bar and the Specimen R.A. Javed, S.F. Zhu, C.H. Guo and F.C. Jiang 98 Numerical Investigation of Flexible Clamp Multi-Point Stretch Forming H.L. Peng, Z.Q. Li, Q.L. Cheng, Y. Yuan and M.Z. Li 102 Customer Data-Oriented Multi-Product Pricing Model F.C. Wan and M.H. Qiu 106 Research and Application of CAD/CAM Technology in NC Machining of Part with Complex Surface J.G. Wan and W. Ding 111 A Design and Research on GMM Precision Flow Pump D.H. Liu, L.W. Liu, G. Tang, H.M. Wen and Q.G. Lu 117 Kinematics Analysis of Double-Cutter & Double-Surface Symmetrical Machining Tool for Large-Scale Marine Propeller R. Wang, Y.Y. Ren and X.S. Huang 122 Non-Linear Analysis of a FGM Cantilever Beam Supported on a Winkler Elastic Foundation Q.L. Li and Q.H. Shao 131 Analysis of Shock Resistance on GWC6066 Marine Gearbox W. Liu, T.J. Lin and Z.Y. He 135 Topological Optimization of Plate Subjected to Linear Buckling Constraints Based on Independent Continuous Mapping Method H.L. Ye, N. Chen, P.Z. Shao and Y.K. Sui 139 Study on Cutting Parameters Optimization of Ball-End Cutters Milling for 2A70 Aluminum Alloy J.M. Xiao and J. Xie 144 The Tribology Design in Transport Machinery Design G.X. Zhang, M. Li and J.W. Cao 148 The Design on Automobile Elevator Sedan Frame H.F. Lai and X.M. Liu 151 The Reverse Modeling Analysis and Design on Compression Molding Bodies H.F. Lai and X.M. Liu 155 Processing Technology of Quartz Pendulous Reed by Chemical Etching Y.D. Zhang and J.P. Wang 159 Study on Dynamic Performance of a Flying Car Body Frame Based on ANSYS Y.F. Wang, T.X. Su and S.W. Yang 163 The Influence of Notch Geometric Size in the Fatigue Strength of Steel Y.Z. Yuan 167 CFD Investigation on the Flow Structure inside Cooling Roll Y.M. Song and Y. Yang 172 Analysis of Grinding Dynamic Based on Grind Teeth Vibration Model of Spiral Bevel Gears M.X. Xiao and J.J. Yang 176 Analysis and Optimization for Lead-Free Reflow Soldering Process Parameters of SMA Based on 6 σ Method X.J. Dai and H.Y. Huang 180 The Kinematics Analytical Method and Simulation with ADAMS Based on Bias Slider- Crank Mechanism T.X. Yan and X.X. Li 185 Application of Modern Design Method in the Design and Develop Process of Mechanical Product J.M. Huang, B.Y. Huang and J.F. Li 189 Research on the Short Steel Cooling Bed System Y.N. Wang, K.S. Yuan, S.L. Zhang and J.H. Zhao 193

3 b Advanced Manufacturing and Information Engineering, Intelligent Instrumentation and Industry Development Flow Field Simulation Analysis of Three-Way Water Hydraulic Valve Based on Surface Micro Modelling C.L. Wang, G.X. Pan and H.S. Deng 197 Structure Design and Analysis of Variable Gear Pump H.S. Deng and W. Chen 201 Optimal Design of a Leveling System of the Piston Seal F. Li, N. Fang, R.Y. Xie and S.C. Tu 205 Air Conditioning Compressor Front Cover of Squeeze Casting Process Design and Numerical Simulation J.J. Tang, L.Q. Hou, L.J. Fei, Y.L. Li and X.Y. Jin 209 Comparative Research on Energy-Saving Performance of New Energy Vehicles X.Y. Wang and Y. Liu 214 Modeling and Stiffness Characteristic Analysis of the Semi-Active Interconnected Air Suspension L.Q. Sun and Z. Cui 220 Design and Analysis on the Vibration Piston Seal J. Yang 225 The Gear Tooth Profile Form of the Mining Truck Wheel Edges Reducer Based on RomaxDesigner R.H. Li and J. Yang 229 Optimization Design of Lifting Beam for Heavy Engine Compartment Based on Ansys Workbench B.J. Wang, Y. Tao, J.W. Li, R.C. Chang and L.Q. Zong 234 Modeling and Simulation of the Relationship of the Bearing Pressure and Area of Building Y.Q. Qi 239 Relationship Modeling for the Psychological Impact of Night Vision on Braking Distance C.S. Liu 242 Simulation of VFTO by ATP/EMTP with Various Arc Models H. Dai, X.F. Liu and W.D. Zhang 245 Flatness Error Analysis Produced by Carbide End Mill Milling Plane Method Z.R. Duan and J. Qi 250 Testing Research and Analysis on the Dynamic Characteristic of the Models of Tooth Surface Flake X.D. Mao, H.Q. Yuan and H.G. Sun 255 Cooling Parameters Optimization of H-Beam after Rolling with MOGA J.H. Ma, B. Tao and X.H. Yao 260 H-Beam Miscrostructure with Residual Stress J.H. Ma, B. Tao and X.H. Yao 264 Study on the Residual Stress in the Finishing Rolling Process of Large-Sized H-Beam J.H. Ma, B. Tao and X.H. Yao 268 Comprehensive Evaluation of Drill Wear Based on the Model of Projection Pursuit L.L. Zhao, Y.C. Dong, L. Liu, G.Y. Kou, M. Lin and C.M. Liu 272 Study of the Dynamic Characteristics of Piston Chamber Pressure and its Optimizing B.Q. Yan, S.M. Chen and C.M. Chen 277 The Higher Order Mechanical and Electric Fields for Arbitrarily Oriented Crack with the Physical Weak-Discontinuity Y. Dai and X. Chong 283 Parametric Design of Crankshaft Based on CATIA Secondary Development Platform H.G. Yang, S.J. Wang and Y.R. Xie 287 The Profile Analysis of Wheels and Rails of Different Wear Stages for Heavy-Haul Wagons T. Zhang, J. Zhang and C.X. Sun 291 Simulation of Drag Reduction Mechanism of the Wing Tip X.L. Liu, X.W. Liu, L.M. Song, D. Jin and Y.K. Li 295 Vibration Analysis of Shaft-Bladed System Undergoing both Global Motion and Elastic Deformation X.S. Yao 299 The Research about the Vibroacoustic Characteristics of the Surface Cracked Plate G.J. Liu, M.M. Li, Y.Q. Wang and Y.Z. Yuan 303

4 Applied Mechanics and Materials Vols c Casting Process and Simulation of K19 Cylinder Block Y. Chen, G. Yang, Y. Yang, K.S. Wang and C.G. Lu 311 Research on Algorithm to Improve Performance of Fluid-Assisted Polishing S.S. Wan, J. Cao and C. Yan 316 Research and Development on YCD4B54 Series Diesel Engine K.C. Tan and G.N. Xu 320 Numerical Simulation of Temperature and Effective Strain Distribution of Aluminum Alloy in the Whole Rough Rolling Process B. Zhang, X.P. Liang and J.F. Fu 326 Study on the Petri Net Model Decomposition of Metallurgical Process H. Bao and C.X. Guo 330 Field Distribution Adjacent to Apertures Located on Infinite Plates R. Xiong, B. Chen and Z.J. Wang 335 The Tooth Profile of Car Synchronous Belt Influencing on the Stress Distribution Y.C. Shi, Z.G. Li and X.G. Yang 339 Automotive Synchronous Belt Transmission Stationarity Simulation Analysis Based on the Rigid-Flexible Coupling Y.C. Shi, Z.G. Li and Q.L. Liu 342 A Horizontal Projection-Based Research on Cross Matching Method in Flight Trajectory of Airplane Model L.F. Zhu, K. Wang, L. Wang, W. Wei, B. Guo and Z.Y. Lu 345 Simulation Analysis of the Seal Plate in the Composite Slurry Valve Based on ANSYS J. Wu, J.Q. Wang and D.Z. Wang 349 Flow Structure Transition inside Contra-Rotating Disk Cavity S.X. Chen, X.J. Shi and X.M. Tan 353 Heat Transfer Boundary Conditions of Piston of Aviation Reciprocating Engine S.X. Chen, X. Meng, X.C. Guo and Y. Zhang 357 Experimental Study on Force of PDC Cutter Breaking Rock J.J. Wang and D.Y. Zou 361 A Mathematical Thermal Hydraulic-Mechanical Coupling Model for Unsaturated Porous Media J. Yan, Y.Q. Wei and H. Cai 365 An Effective Damage Evaluation Method for Crane Girder Based on SVI and LSSVM H.B. Xu and J.Y. Li 370 Theory of Cylindrical Gas Film Seal T. Chen and M.H. Liu 375 Slamming Strength Assessment Analysis of Large Container Ship C.H. Wang, F.L. Han, A.K. Hu and Y.C. Liu 379 Fatigue Strength Assessment Analysis of Large Container Ship F.L. Han, C.H. Wang, A.K. Hu and Y.C. Liu 385 Research on the Lubrication Problems of Driveline Gearbox Y.K. Zhang, T.H. Ju, T.J. Shi and Y.H. Lu 390 The Use of NURBS Modeling in the Ceramic Design S. Rao and J. Liu 394 Kinetic and Dynamic Characteristics Analysis of Timing Chain System for Diesel Engine J.X. Xi, Z.M. Feng, G.Q. Wang and H.T. Guo 398 Modal Analysis of the Dynamic Disc of New-Type Plate-Rolling Crusher D.J. Pei, C.L. Dai and D.C. Qin 404 Lightweight Design of Absorber Spring Plate Based on Topological Optimization Method J. Zhang, N. Sun, P. Zhang and S.B. Hu 408 A New Product Design for Fire Extinguishing Equipment Based on Quality Function Deployment Y.J. Li and J.M. Che 412 Research on Driving Comfort Evaluation of Lower Limb Based on Muscular Forces Z. Li, M.Y. Zhao and L. Zhou 416 Effects of NbC/VC Addition on Mechanical Properties of Ultrafine Grained Cemented Carbides A.M. Jiang, X.Q. Jiang, Z.P. Zhao, J. Yang and R. Yu 420

5 d Advanced Manufacturing and Information Engineering, Intelligent Instrumentation and Industry Development Studies of Large Hydraulic Excavator Boom Energy Recovery Technology Z.M. Meng, Y.C. He and T. Zheng 424 Study on Helical Cylindrical Spring and Presentment of a New Design Method W.X. Li, Y.K. Xu, J. Cai, C.C. Zhang and J.F. Ke 428 Numerical Study of CFRP-Bonded Pressure Pipes Subject to Impact Load Y. Zhao, Z.Y. Wang and Z.G. He 432 Under Pressure Compensation for Wheel Radius Based on Wheel Speed H.E. Gao, L. Chu, J. Chen and W.H. Li 438 Investigation of Size Effect on Micro Hardness of Machined Surface in Micro Cutting T. Zhang, Z.Y. Shi, B. Yan and H.J. Qi 443 Application of Layer Isolation Technique on Plotting AutoCAD Assembling Drawings J.C. Tang 447 Research on Vibration Drilling the Inclined Hole P. Zhang, X.Y. Guo and Z.G. Guan 451 Research on the Micro-Injection of UV Curing J.Y. He, Y. Yu, R.Y. Wang, L. Chang, Q. Wang, L.C. He and W.M. Yang 455 Analysis of Vortex-Induced Vibration and Heat Transfer of an Elastic Cylinder at Low Reynolds Numbers W. Lin, Z.B. Chen, J.Y. Yu and X.T. Zheng 458 The Study on Maintainability Design of the Air Bus A380 M.T. Zhao and W.Q. Song 465 The Modal Analysis of Vehicle Steering System Based on ANASYS S.F. Wang, L.N. Wang, Y.G. Li and J. Dond 469 Design on Groove Curve in Typical Section for 3D Complex Groove Turning Inserts X.M. Feng, G.Y. Tan, M.Y. Wu, Y.N. Cheng and F. Liu 473 Aerodynamic Drag Reduction of SUV Based on Underbody Cover Board J.Y. Wang, B.Y. Wang, X.J. Hu and L. Liao 477 Driving Position Comfortability Design of a Low Aerodynamic Drag Energy Saving Car N. Ding, Y.T. Chen, C.H. Li, J.N. Lei, J.H. Qian and B. Yang 481 Study on the Preparation Technology of Fixed Abrasive Polishing Pad in Chemical Mechanical Polishing Z.X. Liu, J.G. Yao, S.Z. Fan and J.X. Su 485 Study of Vehicle Handling Stability Based on MATLAB Y.G. Li, C.F. Liang and S.F. Wang 489 Optimization of Rotor Mechanical Properties Parameters Based on Particle Swarm Algorithm M.H. Jia, C.L. Wang, X.J. Li and T. Gao 493 Design of Drawer-Combined Condiment Container Y. Yuan and L. Cao 499 The Research of Quantitative Analysis Methods of Composite Structure Repair Tolerance T.J. Liu, W.F. Zhang and X.L. Fang 503 Research of the Punching Mechanism and Design of the Punching Device of the Peanut Mulching Film and Punching Planter X.L. Lü, W. Wang, X.R. Lü and W.M. Wu 507 Design and Analysis of Timing Screw Based on B-Spline Curve C.Q. Zhong and Y.L. Zhang 511 Parameteric Design of the Hydraulic Scissor Lift Platform Based on Secondary Development of Pro / Toolkit X.X. Li, R.R. Wang and L.B. Sun 517 Investigation on the Punching Quality of Hybrid Impact Hydroforming S.H. Wang, L.H. Lang and L.J. Lin 520 Effect of Modified Atmosphere Packaging on Hypomesus Olidus Fresh Quality Q.L. Huang, L.L. Cui, Y.K. Li, J. Gao, N. Lin, J.T. Chang, D.D. Wang and Q.L. Zhang 524 Effect of Sintering Temperature and Time in Nickel Wick for Loop Heat Pipe with Flat Evaporator S.C. Wu, C.Y. Wu, W.J. Lin, J.R. Chen and Y.M. Chen 528 Entity Analysis of Shear Lag about Grooved Beam M. Chen, J.H. Xue and N. Gan 533

6 Applied Mechanics and Materials Vols e Calculation and Analysis of J-Integral Using ANSYS S.Y. Jiang and J.C. Xu 536 Performances of Water Jet Propulsion with PD Pump Y.S. Yang, P. Sun, Y. Fu and C.C. Zhao 539 Hydraulic Model Experiment and Numerical Simulation of Bottom-Blowing Copper Smelting Furnace Y. Yu, Z. Wen, X.L. Liu, F.Y. Su, H.P. Lan and X.H. Hao 546 Modeling and Simulation of Reducer s Production Process Based on Object-Oriented Petri Net H. Dong and H.B. Xin 554 Simulation of Piping Process Based on Coupling Seepage and Erosion J. Zhang 558 Numerical Simulation of Multi-Angle Incidence Aluminum Composite Targets with 7.62mm Piercing Armor Y.L. Li, J.J. Tang, X.Y. Jin, Q. Wang and Z. Ren 562 Leakage and Dispersion Modeling of Hydrogen in the Docking Process of Docking Mechanism and Exhaust Pipe of Rocket Tank Y. Li, J.P. Chen, C.Y. Cui, Y.C. Jiang, X.Y. Li and X. Li 566 Simulation on Rationalization Process Scheduling in Large-Scale Civil Engineering M. Liu 571 Cluster Analysis of Optimization Algorithm Based on the Athletics Mechanics Simulation Model of SimMechanics G. Peng 575 Numerical Simulation of Tire Hydroplaning and its Influencing Factors H.C. Zhou, G.L. Wang, J. Yang and K.X. Xue 580 Dynamic Response of the Surface Building under the Blasting Seismic Waves Y.S. Xu, Q. Sun, D.X. Shi, X.J. Zhang, Y.F. Hu and L. Zhu 586 Study on the Stability of Tunnel with Large Cross Section Based on the Ultimate Strength Reduction Method H.C. Zhou and R.J. Liu 590 Failure Mode Analysis of Bedding Rock Slope Affected by Rock Mass Structural Plane E.A. Chi, T.J. Tao, M.S. Zhao and Q. Kang 594 Stability Analysis of Soil Slope under Strong Earthquake T.J. Tao, E.A. Chi, M.S. Zhao and Q. Kang 598 Vertical and Horizontal Seismic Response Analyses of Long-Span and Single-Layer Spherical Lattice Shell Structure J.S. He and S.L. Wang 602 The Design of Driver s Seat Vibration System of the Road Roller Based on MATLAB J.J. Xia, J.Y. Xu and Y. Chen 606 Thermal Stress Analysis of the 1015 Engine Cylinder X.Y. Jin, J.J. Tang, L.Q. Hou, Y.L. Li and Q. Wang 610 Integrated Design on CAD/CAM/CAPP/CNC for Cam Mechanism H.Q. Gao 614 Structure Design and Simulation Analysis of Decladding Plant for Sunflower Seeds Based on Bionic Principle K.B. Wang, X.F. Wang, C. Yue, R.F. Wang and Z.H. Zhao 619 Self-Evolution of an Assembly Workshop in Knowledgeable Manufacturing Environment T.H. Jiang and H.S. Yan 623 Finite Element Analysis and Parameter Optimization for Mirror EDM without Mixed- Powder X.W. Sui, B.X. Fan, D. Zhou, G.P. Liu and T. Hu 629 Numerical Simulation of Deformations of Rotary and Stationary Rings of Contact Mechanical Seal Based on ANSYS Workbench P.G. Zhang, L. Wei and X. Feng 633 The Analysis on the Scheme of the Flue Gas Compressor of a 300 MW Oxy-Fuel Pulverized Coal Fired Boiler J.Q. Gao, S.D. Sun, L.K. Wang and N. Wang 638 Pulsating Flow Induced Vibration in the Seal System N. Zhang 642

7 f Advanced Manufacturing and Information Engineering, Intelligent Instrumentation and Industry Development Theoretical Error Analysis of the CNC Lens Cutting Machine C. Chen and R.J. Li 646 3D Numerical Simulation of Inner Flow in a Mixed-Flow Stirred Reactor H. Li and R.L. Wang 650 Kinematic Calibration of Hybrid Machine Tool for Marine Propellers Processing Y.Y. Ren, R. Wang, S.S. Zhong and J.M. Wen 653 Study and Development of Network Manufacturing System Based on Open CNC J.F. Pan and Y. Fang 662 Structural Analysis of Servo Put Thread Machine J.Q. Wu, Q. Zou, L.Z. sun, X.Y. Cheng and Q.C. Zhang 666 Analysis of III-Conditioned Characteristics about Weight Location of Rotor Dynamic Balancing K. Wang, Z. Dong, L.T. Cong, X.W. Sun and M.N. Sun 670 Three Dimensional Dynamic Analysis of Crack Growth in Unreinforced Baked Brick Shear Wall H. Chen and L.L. Xie 674 Deep-Hole Drilling Negative Pressure Device Injection Process Simulation Analysis Based on Fluent Z.Y. Chen, X.Q. Shen and Z.J. Xin 680 Study on the Method of Online Adaptive Adjustment Method for Torsional Vibration Model of Turbine Shafting X. He and Y.J. Gu 684 Research Method of Aerodynamic Characteristics of Heavy Duty Truck in Crosswind Z. Zhang, L.L. Ren and J. Li 689 Numerical Simulation of Cylindrical Hollow Steel Specimen in Quenching T. Wen, L. Zhu and L. Sun 693 Using Inverter Frequency in Continuous Caster Length Cutting System of the Cutting Scale Calculation X.R. Deng, J.Q. Mu, S. Zhan and N. Ma 697 Optimal Design of Hot Rolling Strip Mill Housing with Improved GA J.H. Ma, B. Tao and X.H. Yao 701 Study on Metal Flow in the Finish Rolling Process of Large-Sized H-Beam J.H. Ma, B. Tao and X.H. Yao 705 The Simulation of Rolling Process of Wire with Y-Type Roller J.H. Ma, B. Tao and X.H. Yao 709 Simulation Modeling and Analysis of Hydraulic Steering System with Flow Amplification Based on AMESim Q.Q. Lu, W. Shao and J.H. Wei 713 Research on Application of Polynomial Regression Analysis for Computer Color Matching in Textile Dyeing M. Yan, B.S. Zhang and D.M. Wang 719 Design of Fruit Sorting Machine of Weighing Type Based on Solid Works Q. Fang 723 Dynamic Scheduling System of Human-Computer Interaction for Steelmaking-Continuous Casting Process Based on Gantt Chart and Optimization Model Y.L. Zhou, J.C. Zhang, X. Wang and S.P. Yu 727 Optimization Design of Limestone Conveyor System in Circulating Fluidized Bed Boiler Y.W. Liang, H. Song and Y.X. Li 731 The Design of the Horizontal Cross-Flow Scrubbing Tower L.G. Ou Yang, M. Zhang, S.T. Zhou and C.C. Tan 734 Study of Fluid Type Smart Spiral Flatting Machine J.M. Yuan, Y.L. Wang and G.X. Wang 738 The Research of System Design on a Turbine Based on CATIA D.D. Xu and T. Wang 743 Computerized Simulation on Energy Saving Characteristics of Variable Displacement of Double Action Vane Pump P. Zhang and L. Chen 747

8 Applied Mechanics and Materials Vols g Simulation Analysis and Design of Intake Restrictor of FSAE Race Car C.W. Chen, W. Du, J.Q. Sun, W. Liu, Y. Chang and W. Dong 751 Study on Discharge Parameters of Surface Strengthening with Powder Mixed Near Dry EDM for H13 Steel J.L. Wang, H. Yang and M. Li 757 Finite Element Analysis on the Redistribution of Reaction at Support M. Chen, J.H. Xue and N. Gan 761 Study on the Identification Method of Tool Wear State Based on SLLE and SVM in NC Machining R. Pan, Z.Q. Li and P. Nie 765 Research on Prediction Model of End-Point Phosphorus Content for AOD Furnace Smelting Ferrochrome Based on RBF Neural Network D. Qiu and W.J. Dai 769 The Resistivity Logging Response through Casing of Nine-Layer Formations with Crude Oil A.L. Wang and F.P. Liu 773 The Logging Response of Step Conductivity Formations with Crude Oil Emulsion Both in Axial and in Radial A.L. Wang and F.P. Liu 776 Corn-Seed Modeling and Simulation Analysis Based on Shape Features H. Yan and D. Long 779 The Establishment of DEM and its Application in Road Surveying and Designing S.H. Liu and J.H. Zhang 783 Numerical Analyses to Investigate the Impact of External Sun Visor on Aerodynamic Drag of Heavy-Duty Commercial Truck H.B. Yang, X.J. Hu and T.F. Li 787 Luminance Determination of CPA and PBAs in Aircraft Cockpits Based on Ergonomic Research Y.H. Liu, Y.D. Lin, Y.J. Sun, W.Q. Yang and F. Xiong 791 Analysis of the Reasons of Driving Wandering and Research of Solution Methods X.J. Xu and X.X. Guo 795 Waterproofing and Drainage System Design of YUN-GUI Express Railway Cutting Sub- Grade in Expansive Soil Area X. Yang and G.L. Yang 799 Research of Water-Rich Marl Grouting Technology of DongQu Roadway Q. Sun, Y.S. Xu, X.J. Zhang, M.X. Wang and D.X. Shi 806 Chapter 2: Mechatronics, Automation and Control, Intelligent Algorithms for Automation and Control Development and Design of Smart-Robot Image Transmission and Processing System Based on On-Line Control L. Cai 813 Research on Networked Control System Development Based on Agent Visualization Technology J.Q. Song 817 Modeling and Optimizing of Random Gyro Drift Based on AR and GP L. Lv and W. Quan 821 A New Rapid Neural Network Algorithm and Simulation Research for 6-DOF Parallel Platform Y.H. Liu and C. Chang 826 Design of Incremental PID Controller Based on FPGA X. Yun, Z.H. Deng, X.W. Wang and C. Yang 830 Adaptive Control for Steering Engine Fault of Ducted Fan UAV A. Huang and Z.X. Hou 834 Visual Servo Robotic Arm Control System Based on LabVIEW Y.H. Liu and H.Y. Yu 844

9 h Advanced Manufacturing and Information Engineering, Intelligent Instrumentation and Industry Development Kinematics Simulation Analysis of a Kind of Pedal Rehabilitation Robot W.L. Wang and J.R. Wang 848 The Application of Polling in Intelligent Transportation System M.Y. Wang, H.W. Ding, Q.L. Liu and Z.J. Yang 853 Application of Fuzzy Fault Tree Analysis in Aero-Engine F. Ding, J.Q. Dang and J.C. Yin 857 Analysis on the Influence Factors of Smart Meters Reliability Prediction J. Ji, X.Z. Hou, J. Tian, Y. Wang, F.P. Zhao and X.M. Cheng 862 Design and Simulation of Permanent Magnet Synchronous Motor Servo System Y.Q. Liu 866 Internet of Things Intelligent Gas Meter and Control System C.S. Wu, Y.Q. Shi, F.H. Liu and S.C. Zhao 870 Research on Elevator Group Control Uncertainty D.M. Yan and L. Liu 874 Research on Application of Controlling Variables in Computer Color Matching for Textile Dyeing D.M. Wang, B.S. Zhang, M. Yan and D.F. Hong 878 The Development of Marine Autopilot Simulator C.Q. Sun, L.J. Zhang and J.B. Sun 882 Application of CAN Bus and the Layered A* Algorithm in the Parking Guidance System L.P. Cheng, B. Yan and Y.H. Tan 887 Research on MEMS Gyroscope Random Error Compensation Algorithm Based on ARMA Model M.M. Chen and G.W. Gao 891 Intelligent Life-Improvement of TV Controller M.K. Yeh and Z.P. Ho 895 Optimization and Control of Ladle Operation for Special Steel Plants B. Wang, B. Wang, Y.Q. Mu, Q. Liu and X.C. Lu 899 Error Analysis on Cartesian Serial-Parallel Manipulator with Redundant Drive J.G. Luo and M.Y. He 903 Parameter Optimization of Cartesian Serial-Parallel Manipulator with Redundant Actuation Based on BP Neural Networks J.G. Luo and M.Y. He 908 Research on Experimental Car Trajectory Tracking Control Based on the DSP M.Y. Li, X.D. Li, J.P. Guo, J. Xue and Y.T. Liu 912 Application of Improved Back Propagation Neural Network in Mowing Robot s Path Planning Y. Deng, G.W. Yang, X.M. Cui and S.L. Wu 916 Modeling and Fuzzy Control for Complex Flexible Nonlinear Systems with Time-Delay J.X. Chen 920 Studies on Bilateral Impedance Control Method for Teleoperation Robot M. Ying, X. Gao, S.Y. Han, H.X. Sun and Q.X. Jia 924 Research on Intelligent Air Conditioning System of Data Center M. Li, Y. Wang, Z.Q. Feng and W. Li 928 FPGA-Based Design of P-Detection 1-Persistent CSMA Control System Z.G. Liu, H.W. Ding, J.L. Xiong, Q.L. Liu and X.H. Ma 933 Using Heuristic Searching Algorithm for Optimizing Intelligent Transportation Controls H. Tao and L.W. Zhu 937 Simulation on Trajectory Planning of 6R Manipulator Based on the Shortest Distance Criterion Q.Q. Huang, G.F. Chen, J.H. Li and X. Wei 942 Synchronization of Incommensurate Fractional-Order Chaotic System Using Adaptive Control J. Fang and R.X. Zhang 946 Process Parameters Study on Robot Rope Hemming of the Hood J.Q. Wang, Y.W. Huang, G.R. Zhou, Z.L. Niu and Z.W. Cheng 950

10 Applied Mechanics and Materials Vols i Condition Analysis of Steam Turbine Digital Electro-Hydraulic Control System Based on Data Fusion Z.H. Wang 954 The Braking Spray System of Heavy Truck Based on PLC Control Z.J. Song 958 Simulation Analysis and Study of Energy Control Strategy for an Extended-Range Electric Vehicle J.G. Niu and C.H. Xu 962 Design of Wireless Sensor Network Node Based on RFID Technology D.W. Xu, S. Ren and C.J. Yu 966 Feedforward and Feedback Optimal Control of Autonomous Profiling Monitoring Underwater Vehicle with Disturbance H. Mu and J. Yuan 970 Research on the Loading Method of Motors Based on the AC Synchronous Generator D. Han and L.M. Wang 974 The Study on the Control of Open CNC System Accuracy Z.F. Niu and X.H. Wang 979 Modeling and Simulation of PMSM Double-Loop Control System Based on Matlab/Simulink W. Liu 983 Software Design of Micromouse Motion Control H.M. Zhang, L.S. Peh and Y.H. Wang 989 Observer-Based Synchronization of Switched Chaotic Systems L.M. Du, F.Y. Wang and Z.Y. Han 993 Design and Simulation of the Robot Flexible Roller Hemming System Z.G. Wan 997 Control System Design and Trajectory Planning for SCARA Robots N.N. Gao, D.Q. Wang, M.W. Ding, P.X. Yao and L.Y. Fan 1001 Design and Development of an Omni-Directional Mobile Robot for Logistics Z.Q. Gao, H.B. Chen, Y.P. Du and L. Wei 1006 A Survey on the Intelligence Radar Automation System Application D.B. Li and D.P. Xu 1011 Switching Control Blending Methodology with Single Parameter Dependent and its Application to Tiltrotor Q. Wang, W.H. Wu, B.T. Wang and S.Z.Y. Zhang 1015 Preparation of Control Programs for Material Handling Robot L.P. Xu and C.D. Wang 1019 Study on Stability and Robust Control of Stochastic Network Control System C. Wang and C.J. Rao 1023 The Study on Accuracy Control System with the Three Datum Planes in Fixture Design X.D. Shen 1027 Application and Research on Fixture Accuracy Control with the Three Datum Planes X.D. Shen 1031 Developing of High-Power Sandwich Type Piezoelectric Transducer Automatic Assembly Machine Y.D. Zhang and P. Wang 1034 Design and Research of Ignition System for Small Gasoline Engine Electronic Control J.H. Li, L.S. Ding, G.W. Shi, D.W. Liu and G.Y. Zhong 1039 Speed Processing Program Design for Electronic Control Engine J.H. Li, G.Y. Zhong, G.W. Shi, L.S. Ding and D.W. Liu 1043 Research and Implementation of Small Mobile Robot Technology J. Lei and S. Bo 1047 Application of Single Neuron Adaptive PID Controller in Flow Control System Z. Kang, C.Q. Yin and S.M. Teng 1052 Radiate Source Target Localization Techniques Using Airborne ESM Sensor J.H. Li and H.W. Quan 1056 Car Wireless Charging Device W. Lei, X.Y. Xiong and W. Wang 1060

11 j Advanced Manufacturing and Information Engineering, Intelligent Instrumentation and Industry Development Performance Research on the Secondary Hydraulic Transmission System under Variable Pressure Rail F.Y. Zang and Y. Wang 1064 Design of Intelligent Street Lamp - Control System Abstract H.Y. Zheng 1069 Research on the Static Mechanics of the Hybrid Robot J.M. Luo, X.W. Sun, Q.Z. Lin and S.L. He 1073 Three-Motor Synchronization Control Strategy Based on the New Speed Sensorless Active Disturbance Rejection Control H. Li, X.Q. Liu and J. Li 1078 Design and Analysis of an Under-Actuated Self-Adaptive Mechanical Hand Y. Xia, R.Q. Liu, H.W. Guo and Z.Q. Deng 1083 Majorization about Fire Extinguishing Robot of AS-MF09 W. Chen and H.S. Deng 1090 A Wireless Control System for an Expanding-Extending Robotic Endoscope S. He, G.Z. Yan and W.W. Chen 1094 Research on Control by Sliding Form of Variable Structure in Follow-Up System N. Fang, H.L. Huang, F. Li and Z.M. Deng 1099 Controlling Chaos in Automobile Suspension System with Nonlinear Feedback Controller L.J. Chen 1103 Design and Implementation on PC Control Interface of Robot Based on VxWorks Operating System T.Y. Guo, P. Liu, H.C. Wang and S.J. Liu 1109 Position and Attitude Tracking Control Law Design Using Geometric Algebra D.M. Wu, Z.J. Li, B. Li, Y.X. Chen and L. Li 1113 Research on Speed Control Problem of Industrial Sewing Machine System J.F. Zhu, P.X. Hua, J.B. Liu, X. Wang and D.M. Wu 1117 A Study on Regenerative Braking Control Strategy for an Extended-Range Electric Vehicle J.G. Niu and C.H. Xu 1122 Research on Smart Home Controlling System Based on Fuzzy Data Fusion Theory C. Wang, T. Tan, X. Yin, N. Chen and T.X. Xiao 1127 The Method Research of Grey Neural Network Control Based on Data Y.W. Li, Z.G. Ye and C.C. Huo 1131 The Brazing Furnace Intelligent Control Scheme Research of Application C.H. Yao and X.J. Jiang 1135 Study on Maximum Power Point Tracking for Photovoltaic Arrays Based on Fuzzy-Control Strategy X.Z. Meng, T. Yin, C.H. Lin and Z.Q. Wang 1139 Circular Track Crane of Blast Furnace Control System Design and Implementation F.J. Chang, H.Q. Ma, C. Cui, J. Zhang and C.Y. Wang 1144 Control and HIL Simulation of Series Hybrid Electric Vehicles Based on Dynamic Programming Algorithm L. Zhang, B. Jiao and X.H. Guo 1149 Matching Study of Hydraulic Torque Converter and Engine Based on Genetic Algorithm T. Wang, F.F. Liu and J. Wu 1153 The Design of Spraying Manipulator Control System in Mines M. Yu, G.W. Liu and B. Kong 1157 Research on Ink Key Remote Control System of Large Printer P. An and Y.C. Li 1161 One Automatic Control Equipment IETM Making Research Based on GJB6600 D.J. Duan, L. Qiu, Z.T. Zhu, D.P. Wang and R.Y. Xie 1165 Design and Implementation of the System of High Speed Dynamic Balance of Rotor X.Y. Lv, X.L. Jiang, M. Zhao and X.L. Quan 1169 Analysis on Aeroengine Digital Electronic Control X.L. Jiang, X.L. Wei and X.Y. Lv 1173 Research on Cognition of a Soft Robot Based on Amorphous Computational Material J.Q. Wang, S.Q. Yang and J. Wu 1177

12 Applied Mechanics and Materials Vols k Research on Control System of 6-DOF Parallel Machine H.M. Fan 1181 Smith Prediction Based on Genetic Algorithm Self-Tuning PID Control D.S. Wu and Q. Yang 1186 Simulation on the Energy Saving Control Model of Large-Scale Power Control R.X. Fan, W. Xia and B. Liu 1190 Analysis of Kinematics and Dynamic Model and Structure Optimization of Wheeled Robot Y. Du 1194 The Research and Simulation of PID Algorithm Optimization for Concrete Mixing M. Liu 1198 Automatic Control Model for Large-Scale Mechanical Arm Angle T. Yong 1202 Research on the Temperature Control Algorithm of the Poultry Farm X.J. Niu 1206 LED Lights Wireless Intelligent Control System Based on LabVIEW X.Q. Li and P. Qian 1210 Research on Multilevel Mobile Sensor Network Control Based on Probability Coverage Model X.L. Zeng and L. Zhang 1214 Technology Research Vehicle Braking Stability Control Y.R. Liu 1219 The Study and Analysis of Condensate System of Control Strategy Based on Automatic Startup and Shutdown Control System in Supercritical Unit R.H. Du, L.H. Wang, G.B. Zhang, P.T. Zhang and J.H. Yin 1223 Research and Analysis of Discrete PID Controller Parameters Optimization Based on Particle Swarm Optimization Algorithm Z.J. Huang, A.N. Wang and C. Lei 1228 Design of Intelligent Obstacle Avoidance Car Based on FPGA M. Jiang and J.M. Zhang 1233 Study on Greenhouse System Modeling Based on Adaptive Fuzzy Predictive Control Z.F. Wang and C. Liu 1237 Development of an Automotive Electric Window Control System Based on CAN Bus X. Chen, X.F. Yin, Q.C. Yang and H. Lu 1240 Design of PID Temperature Control System Based on BP Neural Network Z.Y. Meng, G.Q. Yu and R. Jin mm Five-Stand Tandem Cold Mill Process Control System H.N. Bu, Z.W. Yan, W. Peng, S.Z. Chen and D.H. Zhang 1248 Bending Force Preset Model Based on Optimal Algorithm H.A. Bu, Z.W. Yan, S.Z. Chen, G.S. Ma, F.C. Yin and D.H. Zhang 1252 Study of Ethernet Control System Based on EPA C.P. Pu, J. Ren, W.J. Feng and S.W. Zhang 1256 Lighting Control System Based on Smart Phone and Bluetooth Y. Peng, K. Xia and J.Y. Wang 1260 Adaptive Output Tracking Control for a Class of MIMO Nonlinear Systems with Time- Delay Y.L. Song and H.Y. Zeng 1264 Research on Wheeled Robot Path Tracking Based on Fuzzy Neural Network S. Yang, B.Q. Zhang and M.Y. Jia 1270 Design of Simulation for Arc Welding Robot Based on OpenGL S.L. Chen 1275 Simulation of a Piezoelectric Motor Controlled by Synchronized Switch L.P. Zou, Q. Zhang, B. Zheng and Z.C. Qiu 1279 Optimization Control of the Ball Mill Mechanical Equipment X.H. Cheng and Q. Li 1283 Simulation Research of the Direct Driving Active Mass Driver System J.L. Liu and J.H. Dai 1287 Aircraft Controller Flight Control System Design H.C. Zhou and D.B. Wang 1291

13 l Advanced Manufacturing and Information Engineering, Intelligent Instrumentation and Industry Development Research on Application of Fuzzy Controller Based on Dual-Thumb Pneumatic Flexible Robot Hand S.S. Wan, J. Cao and C. Yan 1295 A Feature Fast Matching Technique Using Improved Self-Organizing Map for Stereo Vision X.P. Meng, L. Wang, Q.D. Yuan and X. Ji 1299 Aircraft Sequencing Method for Staggered Parallel Runways Approach W.J. Pan, X. Wang and C.Y. Huang 1303 Study on High Performance Power Amplifier for Maglev Flywheel X.Y. Xiong, K. Zhang, M.X. Liu and Y.F. Hu 1307 Fuzzy Control of Tracked Vehicle s Semi-Active Suspension System Based on LMS X.D. Gao, L. Gu, J.F. Guan and J.F. Gao 1313 The Design of a Novel High Frequency Digital Valve Based on Rotating and Differentially Parallel Control H. Du, J.X. Lin, F. Guo and C. Ma 1317 Application of Executable UML Technology for Verification of Armored Vehicle Information System Model F. Lu, K.W. Yang, S.T. Zhang and G.X. Zhan 1324 The Application of Fuzzy Neural Network Generalized Predictive Control in Unit Plant Coordinated Control System S. Zhang, H.J. Ling, Z.L. Zhang, M.J. Hu and Y. Pang 1329 Study on Welding Path Planning of Welding Position Flock for Welding Robot Based on Improved Genetic Algorithm H.W. Lv 1332 Loading and Unloading Schedule of Automatic Storage/Retrieval System H.W. Lv 1336 The Application of Vacuum Power for Drill Automatic Welding Device Z.H. Zheng, D.H. Yang and Y.S. Wang 1340 The Design of Rudder System Simulation Device Z.L. Zhang, Y. Liu, D.D. Liu and H.B. Wang 1344 A Route Planning s Method for Micro UAV Based on Improved Genetic Algorithm L. Lu and H. Zhang 1348 A New Method of 6-DOF Serial Robot s Trajectory Planning under Multi-Constraints Y.T. Zhao, B. Zheng and H.L. Ma 1352 A Research on Thermostatic Control Method of Intelligent Sand Casting and Gas Forming Tester L.F. Zhu, K. Wang, Z. Kang and S. Li 1358 Adaptive Controller Design for SISO Switched Nonlinear Systems with Linear Uncertain Parameters X.P. Zong, M. Zhang and P.G. Wang 1362 Reconfiguration for Sensor Failure of Aero-Engine Electronic Control System Based on the MRAC Z.B. Shi, T. Liu and D. Sun 1367 Study on Control Technology of Active Suspension Based on ADAMS and MATLAB Y. Zhang and L.L. Sun 1372 An Intelligent Traffic Signal Control System Based on ARM Cortex-M3 S.Y. Cheng, X.M. Zhou and Q. Jiang 1378 The Smith Predictor Control of Argon-Bottom-Blowing Supply System with Time-Delay L.H. Chen, Z.P. Huang, W.X. Du and Y.R. Du 1383 Control Strategy Research on Controllable Pendulum in Step Perturbation G.B. Shen, F. Li, Z.C. Zhang and J.H. Zhao 1387 Optimized Simulation of Automatic Gate System of Beijing Tianjin Intercity Line on Beijing South Railway Station S.G. Chen and X. Zhang 1391 Design of Water Level Intelligent Control System Based on SCM M. Zhang 1395 A Biological Inspired Neural Network Approach to Robot Path Planning in Unknown Environment B. Zhu, Z.M. Wang and Z.L. Liu 1399

14 Applied Mechanics and Materials Vols m The Design of the Injection Molding Machine Control System Based on PLC Controller L. Kang and W.T. Jiao 1403 The Design of Wheel-Propeller Amphibious Robot and the Research of its Control System Z.Y. Wu, J. Qi and K. Gao 1407 A Flywheel Energy Storage System Suspended by Active Magnetic Bearings Using an Online Trained Adaptive Neural Network Controller S.C. Chen, V.S. Nguyen, D.K. Le and N.T. Hoai-Nam 1411 The Determination and Analysis of the Variable Filtration Ratio Model for Hydraulic System Filter G.Y. Ma, J. Gao and Y.L. Hu 1417 The Motion Simulation of Small Robot Walking Mechanism C.L. Zhao 1421 A Novel Computing Method of Spatial Arc Trajectories of Manipulator P.C. Ye, Q.X. Jia, G. Chen and H.X. Sun 1425 Application Research of Automatic Aiming Control of Certain Equipment R.X. Qiu, Y.Z. Sun, J. Du and Q. Zhang 1430 Research on the Simulation and Experiment of Self-Synchronization for Vibrating System by Two-Motor Driven with Isolation Frame D. Yang 1434 Multiple Objects Tracking Based on Linear Fitting D.M. Li, T. Li, T. Xiang and W. Xu 1438 Relative Position Algorithm for Optimal Camera Placement of Large Scale Volume Localization System H.F. Tian, H. Yan and Y.F. Wu 1442 Design of a Five Car Stereo Garage Control System H.Y. Yang 1447 Multiple Information Fusion of Intelligent Wireless Agricultural Greenhouse Control System Research Q. Liu, J. Wang and S.C. Yang 1451 Design and Implementation of Intelligent Personnel Management System X.J. Xu, L. Yue and K. Zhu 1455 Research on New Automotive Drum Bench and Control System Q.Q. Chen, X.Q. Wu, T.L. Sun and T.T. Liu 1459 The Design Research of Inductance Sensor in the AMB Rotor System W.T. Yu, H.W. Li and S.Q. Liu 1463 Research and Application on Central Air Conditioning Control System X.J. Sun 1468 Design of Central Air Conditioning Control System L.M. Wei and C. Li 1472 Kinematic Research of the Multi-Motion Pattern Bionic Mechanism M.J. Song, C.J. Ding, X.L. Wang, H.S. Zhou, Y. Zhou and M.L. Zhang 1476 Design Analysis of Electrical Control System for the Gear Teaching Simulator M. Shang, G.M. Lin, W.G. Zhang and F. Zhou 1481 Robot Vision System Based on Image Model Feature Extraction Y. Zhao 1485 The Self-Synchronization Theory of a Vibrating System by Two-Motor Driven with Isolation Frame D. Yang 1490 Auto Parts Welding Line Based on Failsafe PLC T. Sun and T.T. Meng 1495 Research of Test Method for the Robustness of Large-Scale Network Control Software X.R. Jian 1499 Bionic Research and it s Application of Artificial Lateral Line System G.J. Liu, H.Y. Gong, R. Yan and W.F. Gao 1503 A LabVIEW-Based Design on Control System of Sand Casting and Gas Forming Tester L.F. Zhu, K. Wang, L. Wang, Z. Kang, S. Li and W. Wei 1508 Development and Optimization System of Vehicle Electronic Fuel Injection K.C. Tan and G.N. Xu 1512

15 n Advanced Manufacturing and Information Engineering, Intelligent Instrumentation and Industry Development Chapter 3: Measurement and Instrumentation, Monitoring, Testing, Detection, Recognition and Identification Technologies Design of a Robust H Fault-Detection Filter for Uncertain Disturbance System Z.J. Zhu, Z. Liu and W.C. Xu 1521 Development and Design of Intelligent Intrusion Detection System Based on Data Mining H.Y. Chen 1526 Designing of People's Position System under Mine with ZigBee and LabVIEW M.T. Huang and L. Wei 1530 Rapid Quantification of Vitamin C in Navel Oranges by Near-Infrared Diffuse Reflectance Spectroscopy Y.B. Liao, L.S. Huang, X.L. Chen and L. Liao 1534 Analysis and Design of Autonomous Remote Monitoring System for Underwater Targets P.F. Peng, L. Huang and J.Q. Zhang 1538 The Design of Intelligent Monitoring System on Swimming Pool Based on WSN and GPRS J.Y. Sun and S.Y. Qi 1542 The Design of Ultrasonic Distance Measurement System for Auto Reversing Anti-Collision H.Q. Feng 1546 Research on Remote Wireless Pulse Monitoring and Analysis System H. Tian, C.Q. Chu and X.F. Piao 1550 Measurement and Validation of the Young s Modulus of Loudspeaker Spider K. Meng and Z.L. Zhao 1555 The Analysis and Discussion of Infrared Image Metrics X. Zheng, B. Tian and Y. Xing 1559 Study on Demand Design and its Value Measurement of Automobile Customer C. Lv 1563 The Improvement Design for Vehicle Speed Detection System L.C. Xu 1567 An Improved Tracking Architecture for Weak GNSS Signal Based on Moving Average Method J.L. Liu, H.B. Wu, Z.M. He and Y.H. Hu 1571 Research on Reliability Test Technique for Smart Meter Embedded Software J. Ji, K. Zheng, H.F. Chen, J. Tian, X.M. Cheng and K.X. Sun 1576 Mechanical Design of Scientific Instrument Interface Module in Seafloor Observation System Z.N. Mi, B. Yang, L. Jin and R.Z. Wu 1582 Research of Interference Field Measurement and Error Compensation for Geomagnetic Navigation G.S. Liu and Z.Z. Guan 1586 Simulation of Ultrasonic Detection of Natural Defects in Weld with Finite Element Analysis H.X. Chen and S.Q. Yang 1590 Ultrasonic TOFD Detection by Finite Element Simulation Method H.X. Chen and S.Q. Yang 1594 Gesture Recognition Based on Acceleration Sensor Z.G. Wu and H.B. Dai 1598 Implementation of a Face Recognition System Based on the Video Stream Y.H. Yin, Q.Y. Zhu and Y.Y. Yan 1602 Intrusion Detection Method Based on Sparse Expression for SVM X.P. Yu, S. Wu and H.L. Xiong 1606 Iris Recognition Method Based on Feature Discrimination and Category Correlation M.H. Yao, N. Wang and J.S. Li 1610 The Recognition Method for the Supersecondary Structure of DNA-Binding Protein M.H. Yao and N. Wang 1614 Database Design on Physical Function Monitoring System for Sports Training X.Y. Zhang and L.H. Chen 1618

16 Applied Mechanics and Materials Vols o Data Persistence on Physical Function Monitoring System for Athletes X.Y. Zhang and K. Su 1622 New Words Identification Based on Ensemble Methods C. Zhang and Y.Q. Chen 1626 Research on Technical Conditions Testing Line of Certain Tank Gun Weapon System Z.H. Xu, L. Xu, S.H. Zhou and Z.J. Yang 1630 Network Intrusion Detection Method Based on RS-LSSVM F.N. Wang, S.S. Wang, W.F. Che and Y. Bai 1634 A Moving Object Detection Algorithm Based on ORB under Dynamic Scene W.H. Luo 1638 Exploring Data Mining and Aided Diagnosis System of Hepatopathy Y. Yang, L. Li, L. Yang and X.J. Zhang 1642 Acid Emission Automatic Real-Time Sampling Monitoring System Q. Zhang, L. Dai and X. Chen 1646 Abnormal Event Detection of Traffic Intersection Based on SAT Algorithm F.C. Wan, C.X. Yin and X.W. Han 1650 An Improved Particle Image Velocimetry Algorithm for Velocity Measurement of Oil- Water Two-Phase Flow L.F. Kong, W.H. Kong, Y.W. Li, C. Zhang and S.X. Du 1654 A Sparse Representation-Based Face Recognition Using Mixed Group Sparsity T.J. Cai, X.P. Fan and J. Xu 1660 A Pedestrian Recognition and Locating Method under the Condition of Surveillance X.Q. Wu, X. Long and X. Yang 1666 Automatic Detection of Operator without Safety Helmet Y. Fan, K.X. Yu, X.Q. Tang, H.P. Zheng, L. Yu and X. Zhou 1670 Wireless Concrete Construction Monitoring System Based on Mobile-Agent and GPRS A.L. Yu and P. Ji 1675 Shadow Detection Using Multi-Features in SVM Classifier Z.P. Wang, J.D. Tian, Y.D. Tang, Y.Z. Zhang, Y. Xia and L. Wang 1680 Application of BN in the Fault Diagnosis of Brake Failure System J.H. Liu, J.L. Zhang and M.D. Jin 1684 Visual Object Tracking Using Fast Three-Dimensional Discrete Cosine Transform C. Lin and C.M. Pun 1689 An Immediate Error Compensation Method for PCB Alignment Based on Image Measurement Q. Zhang, H.L. Ma, Y.T. Zhao, J. Yang and B. Zheng 1693 Roller Bearing Fault Diagnosis Based on ELMD and Fuzzy C-Means Clustering Algorithm C.L. Liu, X.M. Huang and X.J. Luo 1698 Real-Time BER Test for Real-Time Optical OFDM Transmission System H. Dun, Z.W. Xue, C.X. Xu and Y.C. Li 1701 A Combined Malicious Documents Detecting Method Based on Emulators X. Gao, M. Yu, J.G. Jiang, X.L. Qiu and C. Liu 1707 Object Tracking across Non-Overlapping Cameras Based on Improved TLD and Multi- Feathers Object Matching R.P. Lv, H.G. Sui, J.H. Tu, X.Y. Cai and L. Dong 1713 Nondestructive Detection of Vitamin C Content in Navel Orange Based on GA and GEP Algorithm L.S. Huang, Y.B. Liao and Q. Zhong 1718 Research on Grain Storage Insect Image for Automatic Identification Y. Hou and G.C. Wang 1723 Research on Tailings Pond Online Safety Monitoring System Based on Zigbee Sensor Network D. Zhang, L.G. Wang and X.C. Yang 1728 Research on the Vehicle Detection Technology Based on Improved Burendra Algorithm Q. Li, D. Shen and X.K. Wu 1733 Research on Fault Diagnosis Based on Neural Network Training by Case Injected GA Algorithm for Rotating Machinery X.S. Gan and H.P. Li 1737

17 p Advanced Manufacturing and Information Engineering, Intelligent Instrumentation and Industry Development Wavelet Neural Network Based on EKF Algorithm and its Application in Fault Diagnosis for Rotating Machinery X.S. Gan, H.P. Li and H.L. Gao 1741 Foam Identification Based on Morphological Algorithm and Hough Transform L. Kang 1745 The Research and Application of the Variant Fuzz Testing Framework for Log Based on the Structured Data L.Y. Sun and Y.M. Zhang 1749 Realization and Design of Mobile Video Surveillance Client Platform Based on Smart Phone W.B. Chen, G.L. Zhang and L. Feng 1753 Study on Tunnel Seismic Detection Applied in Coal Mine Y.B. Hu, Y. Wang, Y.Q. Wu, Z.X. Liu and P.H. Xian 1757 Research on Burning Zone Detection Method Based on Flame Image Recognition for Ceramic Roller Kiln Y.H. Zhu and P. Li 1761 The Performance Correlation Hilbert Time-Delay Estimation for Passive Detection F. Wang, M.Q. Liu and J.W. Fan 1768 Complex System Testability Analysis Based on Bayesian Networks under Small Sample X.S. Zhang, K.L. Huang, P.C. Yan and G.Y. Lian 1772 Motion Shadow Detection Method Based on Bagging Algorithm H.C. Zhou and Z.P. Jiang 1778 The Design of Yield Monitor Device of Tomato Harvester M.C. Chen and H.W. Zhang 1782 Summary of Remote Monitoring System for CNC Machines Z.W. Wang, P. Tang and X.S. Zheng 1787 The Research of the Grass-Roots Level Radar Equipment Maintenance and Detecting Expert System Model D.H. Peng, F. Ye, X. Wang and C.H. Jiao 1793 Study of Intrusion Detection Based on Genetic Algorithm and Rule L.W. Xu, L.J. Qiao, X.Y. Ou and K. Zhang 1797 A New Signal Classification Method Based on EEMD and FCM and its Application in Bearing Fault Diagnosis C.J. Wang, H.Y. Li, W. Xiang and D. Zhao 1803 Fast Computation of Sample Entropy in Forced Oscillation Detection Z.S. Zhu, D.C. Liu and Q.F. Liao 1807 Spatial Distorted Target Recognition Based on Improved Maximum Average Correlation Height Algorithm H.Z. Liu, Y. Chen and L.Q. Zheng 1811 Studying on the Application of Using Audible Sound to Detect Cavitation Phenomenon in a Centrifugal Pump H.P. Guo, S.L. Zhao, N. Li and C. Tian 1815 Temperature Measurement System of Roller Kiln Based on Colorimetry H. Jia, X.Y. Guo, Y.C. Dai and J.S. Wu 1818 Primary Establishment of LAMP Method for Cyprinid Herpesvirus 2 Detection Z.X. Yang, G.L. Li, Y. Wang, X.P. Yao, K.Y. Wang, S.Z. Peng, B. Wang, H.X. Ya and R.Y. Ren 1823 Design and Implementation of a Portable Pulse Wave Velocity Measuring Prototype C.H. Guo, H.Y. Wang, Y. Li, Z.B. Chen and S.Y. Li 1829 Character Recognition Based on Wavelet Neural Network Optimized with PSO Algorithm S. Chi 1834 The Design of Three-Dimensional Computer Room Monitoring System Based on Unity3D K. Jiang, F.Y. Zheng and H.K. Teng 1838 Constrained Least Square Estimation Algorithm for Multisensor Bearings-Only Passive Target Tracking Z.W. Xuan and K. Nie 1842 Accuracy Analysis of Highly Kinematical Positioning of GPS J. Zhan, L. Yuan and Y.L. Wu 1847

18 Applied Mechanics and Materials Vols q Application of SVD-TLS Based Parameter Estimation Method in Aircraft Structural Modal Parameter Identification L. Gong 1851 Targets Detection Based on Time Reversal Operator with Uniform Circular Array W. Liu, Y.Q. Fu and D. Xu 1855 Research on a New Radar Antenna Pattern Measurement Method J.C. Li, Y.H. Ma, Y.W. Yin, Y. Song and Z.H. Xie 1859 A Novel Coastline Detection Algorithm Based on Modified Iterative Selection Method H.Y. Chen, X.F. Shi, L. Feng, Y.L. Zhang and Y.H. Li 1864 Testing Method Discussion of FM Simulcast System F.Y. She, J.H. Kang, F.Z. Yang and C. Xu 1868 Navigation System Failure Detection Based on FM Gauss Wavelet Transforms D.F. Ding and X.M. Zhao 1874 Impact of Multipath Effect on Low-Altitude Elevation Measurement of Radar L.J. Meng, D. Li and H.B. Liu 1879 Carbon Brush Wear of Radar Tachometer Identification Technology Based on Eigen Value Analysis in Time Domain H.F. Liu, Y.M. Nie, K. Chen, F. Sun and H. Zhu 1883 A Novel Testing Approach for AM Tracking Error of GCS DEWE2010 Based C. He, G.L. Dong, L. Yang, D.F. Han, Q. Li and H.Q. Wei 1887 Tool Wear Detection Based on Visual Saliency Mechanism C.C. Wei, S.Q. Guan, F.J. Wu and S.H. Xu 1891 Research on Real Time Automatic Acquisition System of Parameter Detectionequipment Department Component Based on WCF D.Q. Deng, Y.H. Liu, X.J. Song and S.M. Wei 1895 Study on Light Scattering Method to Monitor Vehicle Lubricant Performance X.W. Li and B. Xu 1899 The Design of Plant Growth Detection System Based on Spectroscopy Y.X. Liu 1903 Research on Openflow Application in Intrusion Detection Evaluation Q. Tian and J.L. Zhu 1908 Recognition of Airport Runways in SAR Imagery T.W. Luo, D.J. Li, G. Yang and H.N. Wu 1912 Design of Underground Displacement Monitoring Circuit Based on STC89C58 K.G. Hu, Y.L. Zhou and Q. Li 1916 Research on Nonlinear Identification Model of Wavelet Neural Network Trained by Artificial Fish Swarm Algorithm X.S. Gan and H.L. Gao 1920 Technology Research of Infrasonic Signal Acquisition and Pretreatment for Identification of Nuclear Explosion X.L. Pang, Y. Wang, H.W. Zhao and X.Y. Cheng 1924 Study on Calibration Method for Explosion Pressure Test System G.R. Liu, X.G. Zhang and X. Zhao 1928 A Method for P2P Traffic Identification Based on Semi-Supervised Learning L.F. Wu 1933 Research on Intelligent Monitoring and Warning System of Expressway Fog Based on ZigBee Z.G. Guan, J. Liang and K.Q. Fan 1938 Research on Intelligent Monitoring and Warning System of Highway Express Fog J. Liang, Z.G. Guan and K.Q. Fan 1942 Research on the GUI Testing Based on the Bayesian Network Model Z.F. Yang, S.X. Yang, B.B. Yin and C.G. Bai 1946 A New Multi-Scale Harris Interesting Point Detector G.X. Wang, Y.C. Liu and H. He 1950 Design and Implementation of Portable Detection System for Geodetic Survey Vehicle C.F. Zhao, X. Huo, H.L. Tian and Q.B. Kong 1956