SMAJ5.0 thru SMAJ188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor

Size: px
Start display at page:

Download "SMAJ5.0 thru SMAJ188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor"

Transcription

1 Surface Mount TRANSZORB Transient Voltage Suppressors DO-24AC (SMA) PRIMARY CHARACTERISTICS 5.0 V to 88 V P PPM 400 W, 300 W I FSM 40 A T J max. C DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional use C or CA suffix (e.g. SMAJC, SMAJCA). Electrical characteristics apply in both directions. FEATURES Low profile package Ideal for automated placement Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a /0 µs waveform, repetitive rate (duty cycle): 0.0 % (300 W above 78 V) Excellent clamping capability Very fast response time Low incremental surge resistance Meets MSL level, per J-STD-020, LF maximum peak of 260 C Solder dip 260 C, 40 s Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and telecommunication. MECHANICAL DATA Case: DO-24AC (SMA) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC Q qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B2 E3 suffix meets JESD 20 class A whisker test, HE3 suffix meets JESD 20 class 2 whisker test Polarity: For uni-directional types the band denotes cathode end, no marking on bi-directional types RATINGS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a /0 µs waveform ()(2) (Fig. ) P PPM 400 W Peak pulse current with a waveform () See next table A Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) I FSM 40 A Operating junction and storage temperature range T J, T STG - 55 to + C Notes: () Non-repetitive current pulse, per Fig. 3 and derated above T A = 25 C per Fig. 2. Rating is 300 W above 78 V (2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal

2 ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN V BR AT I T () UNI BI MIN. MAX. TEST I T (ma) STAND-OFF REVERSE LEAKAGE AT I D (µa) (3) PEAK PULSE SURGE (A) (2) CLAMPING AT V C SMAJ5.0 AD WD SMAJ5.0A (5) AE WE SMAJ6.0 AF WF SMAJ6.0A AG WG SMAJ6.5 AH WH SMAJ6.5A AK WK SMAJ7.0 AL WL SMAJ7.0A AM WM SMAJ7.5 AN WN SMAJ7.5A AP WP SMAJ8.0 AQ WQ SMAJ8.0A AR WR SMAJ8.5 AS WS SMAJ8.5A AT WT SMAJ9.0 AU WU SMAJ9.0A AV WV SMAJ AW WW SMAJA AX WX SMAJ AY WY SMAJA AZ WZ SMAJ2 BD XD SMAJ2A BE XE SMAJ3 BF XF SMAJ3A BG XG SMAJ4 BH XH SMAJ4A BK XK SMAJ5 BL XL SMAJ5A BM XM SMAJ6 BN XN SMAJ6A BP XP SMAJ7 BQ XQ SMAJ7A BR XR SMAJ8 BS XS SMAJ8A BT XT SMAJ20 BU XU SMAJ20A BV XV SMAJ22 BW XW SMAJ22A BX XX SMAJ24 BY XY SMAJ24A BZ XZ SMAJ26 CD YD SMAJ26A CE YE SMAJ28 CF YF SMAJ28A CG YG SMAJ30 CH YH SMAJ30A CK YK SMAJ33 CL YL SMAJ33A CM YM SMAJ36 CN YN SMAJ36A CP YP SMAJ40 CQ YQ

3 ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN V BR AT I () T UNI BI MIN. MAX. TEST I T (ma) SMAJ40A CR YR SMAJ43 CS YS SMAJ43A CT YT SMAJ45 CU YU SMAJ45A CV YV SMAJ48 CW YW SMAJ48A CX YX SMAJ5 CY YY SMAJ5A CZ YZ SMAJ54 RD ZD SMAJ54A RE ZE SMAJ58 RF ZF SMAJ58A RG ZG SMAJ60 RH ZH SMAJ60A RK ZK SMAJ64 RL ZL SMAJ64A RM ZM SMAJ70 RN ZN SMAJ70A RP ZP SMAJ75 RQ ZQ SMAJ75A RR ZR SMAJ78 RS ZS SMAJ78A RT ZT SMAJ85 RU ZU SMAJ85A RV ZV SMAJ90 RW ZW SMAJ90A RX ZX SMAJ RY ZY SMAJA RZ ZZ SMAJ VD VD SMAJA SE VE SMAJ20 SF VF SMAJ20A VG VG SMAJ30 SH VH SMAJ30A VK VK SMAJ SL VL SMAJA VM VM SMAJ60 SN VN SMAJ60A SP VP SMAJ70 SQ VQ SMAJ70A SR VR SMAJ88 ST VT SMAJ88A SS VS Notes: () Pulse test: t p ms (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) For bi-directional types having of V and less, the I D limit is doubled (4) All terms and symbols are consistent with ANSI/IEEE C62.35 (5) For the bi-directional SMAJ5.0CA, the maximum V BR is 7.25 V (6) V F = 3.5 V at I F = 25 A (uni-directional only) STAND-OFF REVERSE LEAKAGE AT I D (µa) (3) PEAK PULSE SURGE (A) (2) CLAMPING AT V C 3

4 Peak Pulse Power (P PP ) or Current (I PP ) Derating in Percentage, % P PPM - Peak Pulse Power (kw) SMAJ5.0 thru SMAJ88CA THERMAL CHARACTERISTICS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Typical thermal resistance, junction to ambient () R θja 20 C/W Typical thermal resistance, junction to lead R θjl 30 C/W Note: () Mounted on minimum recommended pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SMAJ5.0A-E3/ " diameter plastic tape and reel SMAJ5.0A-E3/5A A 70 3" diameter plastic tape and reel SMAJ5.0AHE3/6 () " diameter plastic tape and reel SMAJ5.0AHE3/5A () A 70 3" diameter plastic tape and reel Note: () Automotive grade AEC Q qualified RATINGS AND CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) SMAJ85 - SMAJ88 Non-Repetitive Pulse Waveform shown in Fig. 3 T A = 25 C SMAJ5.0 - SMAJ x 0.2" (5.0 x 5.0 mm) Copper Pad Areas µs.0 µs µs µs.0 ms ms t d - Pulse Width (s) Figure. Peak Pulse Power Rating Curve - Peak Pulse Current, % I RSM t r = µs Peak Value Half Value - t d t - Time (ms) T J = 25 C Pulse Width (t d ) is defined as the Point where the Peak Current decays to % of I PP 2 /0 µs Waveform as defined by R.E.A. Figure 3. Pulse Waveform C J - Junction Capacitance (pf) Bi-Directional T J = 25 C f =.0 MHz V sig = mvp-p Measured at Stand-Off Voltage Uni-Directional T J - Initial Temperature ( C) Figure 2. Pulse Power or Current vs. Initial Junction Temperature Reverse Stand-Off Voltage Figure 4. Typical Junction Capacitance 4

5 Transient Thermal Impedance ( C/W) SMAJ5.0 thru SMAJ88CA 0 Peak Forward Surge Current (A) 200 T J = T J max. 8.3 ms Single Half Sine-Wave t p - Pulse Duration (s) Figure 5. Typical Transient Thermal Impedance 5 Number of Cycles at 60 Hz Figure 6. Maximum Non-Repetitive Forward Surge Current Uni-Directional Only PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-24AC (SMA) Cathode Band Mounting Pad Layout (.65) (.25) 0. (2.79) 0. (2.54) (.68) MIN (.88) MAX (4.) 0.57 (3.99) 0.02 (0.305) (0.52) (.52) MIN (2.29) (.98) (5.28) REF (.52) (0.76) (0.203) 0 (0) (5.28) 0.94 (4.93) 5

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR uni-directional 6.40 V to 231 V V BR bi-directional 6.40 V to 231 V V WM 5.0 V to 188 V P PPM 400 W, 300 W I FSM 40 A

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AC (SMA) PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V P PPM 400 W, 300 W I FSM 40 A T J max. 1 C DEVICES FOR BI-DIRECTION APPLICATIONS For bi-directional

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR (bi-directional) 6.4 V to 231 V V BR (uni-directional) 6.4 V to 231 V V WM 5.0 V to 188 V P PPM 400 W, 300 W I FSM 40

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Glass passivated junction Low inductance Excellent clamping capability

More information

Transient Voltage Suppression Diodes: SMAJ Series SMD Type 400 W

Transient Voltage Suppression Diodes: SMAJ Series SMD Type 400 W Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional

More information

400W, 5V - 188V Surface Mount Transient Voltage Suppressor

400W, 5V - 188V Surface Mount Transient Voltage Suppressor 400W, 5V - 188V Surface Mount Transient Voltage Suppressor FEATURES Low profile package Ideal for automated placement Glass passivated junction Built-in strain relief Excellent clamping capability Fast

More information

SMAJ Transient Voltage Suppressor Diode Series

SMAJ Transient Voltage Suppressor Diode Series SMAJ Transient Voltage Suppressor Diode Series General Information The SMA series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping

More information

High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors

High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity

More information

ASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF

ASMAJ5.0(C)A-HF Thru. ASMAJ440(C)A-HF SMJ.0(C)-HF Thru. SMJ440(C)-HF Working Peak :.0 to 440 Volts Power Dissipation: 400 Watts RoHS Device Halogen Free Features - 400W peak pulse power capability with a 0/000µs waveform, repetitive rate (duty

More information

Transient Voltage Suppression Diodes: SMAF Series SMD Low Profile Type 400 W

Transient Voltage Suppression Diodes: SMAF Series SMD Low Profile Type 400 W Features 1. Low profile and space saving 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional

More information

SMAJ Series. Transient Voltage Suppressors DO-214AC/SMA Package FEATURE ELECTRICAL CHARACTERISTICS DIMENSIONS SOLDERING PAD LAYOUT

SMAJ Series. Transient Voltage Suppressors DO-214AC/SMA Package FEATURE ELECTRICAL CHARACTERISTICS DIMENSIONS SOLDERING PAD LAYOUT Transient Suppressors FEATURE Breakdown from 5.0 to 440V 400W peak power dissipation with a 10/1000μs waveform, repetitive rate (duty cycle): 0.01% Glass passivated chip Excellent clamping capability;

More information

Transient Voltage Suppression Diodes Surface Mount 400W > SMAJ series. SMAJ Series. SMAJ Series

Transient Voltage Suppression Diodes Surface Mount 400W > SMAJ series. SMAJ Series. SMAJ Series Surface Mount 4W > SMAJ series RoHS Agency Approvals AGENCY AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics ( =25 O C unless otherwise noted Parameter Symbol Value Unit Peak Pulse Power Dissipation

More information

SMAJ Series SMA/DO-214AC. Mechanical Data. Page <1> 29/01/10 V1.1. : Moulded plastic. : Pure tin plated lead free. : Indicated by cathode band.

SMAJ Series SMA/DO-214AC. Mechanical Data. Page <1> 29/01/10 V1.1. : Moulded plastic. : Pure tin plated lead free. : Indicated by cathode band. SMA/DO-214AC Features: For surface mounted application. Low profile package. Built-in strain relief. Glass passivated junction. Excellent clamping capability. Fast response time : typically less than 1.0ps

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional

More information

Surface Mount Transient Voltage Suppressor Stand-Off Voltage to 180 Volts 200 Watt Peak Pulse Power

Surface Mount Transient Voltage Suppressor Stand-Off Voltage to 180 Volts 200 Watt Peak Pulse Power Features Surface Mount Transient Suppressor Stand-Off - 5.0 to 80 olts 0 Watt Peak Pulse Power For surface mounted applications in order to optimize board space Low profile package Built-in strain relief

More information

High Temperature Stability and High Reliability Conditions FEATURES

High Temperature Stability and High Reliability Conditions FEATURES Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T

More information

SMAJ SERIES 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS

SMAJ SERIES 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS 400 WATT TVS COMPONENT APPLICATIONS Power Supply AC/DC Applications Telecom DO-214AC PACKAGE FEATURES UL File Recognition #E208219 IEC 61000-4-2 (ESD): Level 4 - Air 15kV, Contact 8kV IEC 61000-4-4 (EFT):

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional

More information

SMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional

SMF Series. Transient Voltage Suppression Diodes. Surface Mount 200W > SMF Series. Description. Uni-directional SMF Series RoHS Pb e3 Uni-directional Description The SMF series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage

More information

New Product. High Temperature Stability and High Reliability Conditions FEATURES

New Product. High Temperature Stability and High Reliability Conditions FEATURES Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 43 V V BR 11.1 V to 52.8 V P PPM 3 W P D 6. W I FSM 2 A T

More information

MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product

MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical

More information

Surface Mount TRANSZORB Transient Voltage Suppressors

Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,

More information

Surface Mount Transient Voltage Suppressors (TVS)

Surface Mount Transient Voltage Suppressors (TVS) Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Uni-directional

More information

TV04A5V0-HF Thru. TV04A441-HF

TV04A5V0-HF Thru. TV04A441-HF TV45V-HF Thru. TV444-HF Working Peak : 5. to 44 Volts Power Dissipation: 4 Watts RoHS Device Halogen Free Features - Glass passivated chip. - 4W peak pulse power capability with a / µs waveform, repetitive

More information

Data Sheet PT7M (CL/CH /NL /CLL/NLL) Voltage Detector. Features. Ordering Information. Description

Data Sheet PT7M (CL/CH /NL /CLL/NLL) Voltage Detector. Features. Ordering Information. Description Features Highly accurate: ±1.5% (25 C) Low power consumption: 0.9uA @ 3V Vcc Detect voltage range: 1.8 to 5V in 100mV increments Operating voltage range: 1.2V ~ 5.5V Operating temperature range: -40 C

More information

Peak Pulse Power Dissipation on 10/1000us waveform (Note1,Note2, Fig.1). PPPM Minimum 400 Watts

Peak Pulse Power Dissipation on 10/1000us waveform (Note1,Note2, Fig.1). PPPM Minimum 400 Watts DESCRIPTION The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. FEATURES For surface mounted

More information

P4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

P4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.   FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)

More information

SMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series

SMA6L Series. Transient Voltage Suppression Diodes. Surface Mount 600W > SMA6L series SMA6L Series RoHS Pb e3 Uni-directional Description The SMA6L series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient

More information

SMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.

SMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional

More information

5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS

5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.  FEATURES TYPICAL APPLICATIONS TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass

More information

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.  FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional

More information

MSP3V3, MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES. Series.

MSP3V3, MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.  FEATURES. Series. Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series Top View Bottom View PRIMARY CHARACTERISTICS V WM 3.3 V to 5. V V BR 4.1 V to 7.7 V P PPM 15 W T J max. 15 C Polarity Uni-directional Package

More information

ICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.

ICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM

More information

Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions

Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Patented* *Patent #'s 4,980,315 5,166,769 5,278,094 DO-214AA (SMB) FEATURES Patented PAR

More information

S M A J x x x C A. Reverse Stand-Off Voltage

S M A J x x x C A. Reverse Stand-Off Voltage Description The SMAJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features Fast response time

More information

Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions

Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Patented* *Patent #'s 4,980,315 5,166,769 5,278,094 DO-214AA (SMB) FEATURES Patented PAR

More information

SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.   FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V V BR (uni-directional) 6.4 V to 209 V V BR (bi-directional) 6.4 V to 209 V P PPM 500 W P D 3.0 W I FSM

More information

400 W Surface Mount Transient Voltage Suppressor

400 W Surface Mount Transient Voltage Suppressor DO-AC (SMA) Voltage 6.8 V to 540 V (Uni) 6.8 V to 260 V (Bid) Power 400 W /ms (0W above 2 V) R Maximun Ratings and Electrical Characteristics at 25 C FEATURES Low profile package Ideal for automated placement

More information

High Temperature Stability and High Reliability Conditions FEATURES

High Temperature Stability and High Reliability Conditions FEATURES Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions SMB (DO-214AA) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM 600 W I FSM

More information

SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS

SA5.0A thru SA170CA. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.   FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.0 V to 170 V P PPM 500 W P D 3.0 W I FSM (uni-directional only) 70 A T J max. 175 C DEVICES FOR BI-DIRECTION APPLICATIONS

More information

General Purpose Plastic Rectifier

General Purpose Plastic Rectifier General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0 µa T J

More information

Surface Mount Ultrafast Plastic Rectifier

Surface Mount Ultrafast Plastic Rectifier Surface Mount Ultrafast Plastic Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV). A V RRM 5 V, V, 5 V, 2 V I FSM 3 A t rr 5 ns V F at I F.92 V T J max. 5 C Package SMA (DO-24AC) Diode variations

More information

High Temperature Stability and High Reliability Conditions FEATURES

High Temperature Stability and High Reliability Conditions FEATURES Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x

More information

Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions

Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Surface Mount Automotive Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Patented* * Patent #'s 4,980,315 5,166,769 DO-214AB (SMC) 5,278,094 PRIMARY CHARACTERISTICS

More information

High Power Density Surface Mount PAR Transient Voltage Suppressors

High Power Density Surface Mount PAR Transient Voltage Suppressors High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR

More information

Transient Voltage Suppressors. SMAJ Series. Circuit Protection System

Transient Voltage Suppressors. SMAJ Series. Circuit Protection System Transient Suppressors SMAJ Series Features UNI Fast response time Low incremental surge resistance Matte tin lead free Plated Halogen ree and RoHS compliant Typical IR less than 1µA above 10V Compatible

More information

General Purpose Plastic Rectifier

General Purpose Plastic Rectifier General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0

More information

Ultrafast Avalanche SMD Rectifier

Ultrafast Avalanche SMD Rectifier Ultrafast Avalanche SMD Rectifier BYG2D thru BYG2J FEATURES Low profile package Ideal for automated placement Glass passivated junction Low reverse current Soft recovery characteristics DO-24AC (SMA) Ultrafast

More information

High Temperature Stability and High Reliability Conditions FEATURES

High Temperature Stability and High Reliability Conditions FEATURES Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.50 V to 36.8 V P PPM 600 W I FSM 75 A T J max.

More information

Surface Mount Ultrafast Plastic Rectifier

Surface Mount Ultrafast Plastic Rectifier Surface Mount Ultrafast Plastic Rectifier PRIMARY CHARACTERISTICS I F(AV) 3. A V RRM 5 V, V, 15 V, 2 V I FSM A t rr 2 ns V F.9 V T J max. 15 C Package Diode variations Single FEATURES Glass passivated

More information

Bi-directional 1500 W TVS in TO-277 (SMPC) Package FEATURES

Bi-directional 1500 W TVS in TO-277 (SMPC) Package FEATURES Surface Mount PAR Transient Voltage Suppressors Bi-directional 1500 W TVS in TO-277 (SMPC) Package esmp Series Terminal 1 Terminal 2 FEATURES Junction passivation optimized PAR design T J = 185 C capability

More information

Surface Mount Ultra Fast Rectifier

Surface Mount Ultra Fast Rectifier USA, USB, USD, USG, USJ, USK, USM Surface Mount Ultra Fast Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV).0 A 50 V, 0 V, 200 V, 400 V, 600 V, V RRM 800 V, 00 V I FSM 30 A t rr 50 ns, 75 ns V F

More information

Ultrafast Avalanche SMD Rectifier

Ultrafast Avalanche SMD Rectifier Ultrafast Avalanche SMD Rectifier FEATURES Low profile package Ideal for automated placement Glass passivated junction Low reverse current Low forward voltage DO-24AC (SMA) MAJOR RATINGS AND CHARACTERISTICS

More information

6600W, 10V 43V Surface Mount Transient Voltage Suppressor

6600W, 10V 43V Surface Mount Transient Voltage Suppressor 66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement

More information

Ultrafast Avalanche SMD Rectifier

Ultrafast Avalanche SMD Rectifier Ultrafast Avalanche SMD Rectifier FEATURES Low profile package Ideal for automated placement Glass passivated junction Low reverse current Low forward voltage DO-24AC (SMA) MAJOR RATINGS AND CHARACTERISTICS

More information

High Temperature Stability and High Reliability Conditions FEATURES

High Temperature Stability and High Reliability Conditions FEATURES Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-28AB PRIMARY CHARACTERISTICS V BR 27 V P PPM ( x μs) 36 W P D 5 W V WM 22 V I RSM 7 A I FSM

More information

High Temperature Stability and High Reliability Conditions FEATURES

High Temperature Stability and High Reliability Conditions FEATURES Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V BR 6.8 V to 47 V V WM 5. V to 40.2 V P PPM 10 W I FSM 200 A T J max.

More information

High Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation

High Temperature Stability and High Reliability Conditions FEATURES. PARAMETER SYMBOL VALUE UNIT with 10/1000 μs waveform Peak pulse power dissipation Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions PRIMARY CHARACTERISTICS V WM 1 V to 36 V V BR 11.1 V to 44.2 V P PPM (1 x 1 μs) 36 W P PPM (1

More information

High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier

High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier High Current Density Surface Mount Dual Common-Cathode Schottky Rectifier esmp TM Series TO-77A (SMPC) Cathode Anode Anode PRIMARY CHARACTERISTICS I F(AV) x 4.0 A V RRM 50 V, 60 V I FSM 0 A E AS 0 mj V

More information

High Temperature Stability and High Reliability Conditions FEATURES

High Temperature Stability and High Reliability Conditions FEATURES Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS

More information

High Temperature Stability and High Reliability Conditions FEATURES

High Temperature Stability and High Reliability Conditions FEATURES Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions Top View SlimSMA TM DO-22AC PRIMARY CHARACTERISTICS V BR 6.8 V to 5 V 5.8 V to 43.6 V P PPM (

More information

200W, 5V - 100V Surface Mount Transient Voltage Suppressor

200W, 5V - 100V Surface Mount Transient Voltage Suppressor 200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I

More information

High Temperature Stability and High Reliability Conditions FEATURES

High Temperature Stability and High Reliability Conditions FEATURES Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS

More information

Transient Voltage Suppressors (TVS) Data Sheet

Transient Voltage Suppressors (TVS) Data Sheet Transient Suppressors (TVS) Data Sheet Features For surface mounted applications in order to optimize board space Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent

More information

Ultrafast Avalanche SMD Rectifier

Ultrafast Avalanche SMD Rectifier Ultrafast Avalanche SMD Rectifier PRIMARY CHARACTERISTICS I F(AV) 1.5 A V RRM V I FSM 3 A I R 5. μa t rr 75 ns V F 1.7 V E R 2 mj T J max. 15 C Package Diode variations Single FEATURES Low profile package

More information

PAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications

PAM28DOAC Series 400 WATT TVS COMPONENT APPLICATIONS DO-214AC PACKAGE MECHANICAL CHARACTERISTICS FEATURES PIN CONFIGURATIONS. Automotive Applications 4 WATT TVS COMPONENT APPLICATIONS Automotive Applications DO-214AC PACKAGE FEATURES AEC-Q11 Qualified ISO 7637-2 Pulse 1, 2a, 2b, 3a, 3b Compliant UL File Recognition #E28219 IEC 6-4-2 (ESD): Level 4 -

More information

SMC5K10A thru SMC5K85A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.

SMC5K10A thru SMC5K85A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 11.1 V to 104 V V WM 10 V to 85 V P PPM 5000 W T J max. 150 C Polarity Uni-directional Package TYPICAL APPLICATIONS Use

More information

Transient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W

Transient Voltage Suppression Diodes Axial Leaded 1500W > TP1.5KE series. Features 1500 W 6.5 W 200 A 3.5 V. -55 to 150 C. -55 to 175 C 15 C/W 75 C/W TP.5KE Series RoHS Pb e3 Description The TP.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

P4SMAJ SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified

P4SMAJ SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified 4W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 4W Peak Pulse Power Dissipation B 5.V 44V Standoff Voltage Uni- and Bi- Versions Available D Excellent Clamping

More information

SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN Surface Mount TRANSZORB Transient Voltage Suppressors

SMPC5.0A thru SMPC36A, SMPC22AN thru SMPC85AN   Surface Mount TRANSZORB Transient Voltage Suppressors Surface Mount TRANSZORB Transient Voltage Suppressors DESIGN SUPPORT TOOLS Models Available SMPCxxA SMPCxxAN esmp Series 2 SMPC (TO-277A) A Anode K Cathode 1 Cathode 1 Cathode 2 Anode 1 Anode 2 click logo

More information

Ultrafast Avalanche SMD Rectifier

Ultrafast Avalanche SMD Rectifier Ultrafast Avalanche SMD Rectifier PRIMARY CHARACTERISTICS I F(AV) 1.5 A V RRM 1 V I FSM 3 A I R 5. μa t rr 75 ns V F 1.7 V E R 2 mj T J max. 15 C Package Circuit configuration Single FEATURES Low profile

More information

P4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional

P4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

Surface Mount Glass Passivated Rectifier

Surface Mount Glass Passivated Rectifier Surface Mount Glass Passivated Rectifier DO-24AC (SMA) PRIMARY CHARACTERISTICS I F(AV) 2.0 A V RRM 200 V, 400 V, 600 V, 800 V, 00 V I FSM 50 A I R 5.0 μa V F at I F = 2.0 A (T A = 25 C) 0.90 V T J max.

More information

Surface Mount Ultrafast Plastic Rectifier

Surface Mount Ultrafast Plastic Rectifier Surface Mount Ultrafast Plastic Rectifier PRIMARY CHARACTERISTICS I F(AV) 1.0 A V RRM 200 V I FSM 40 A t rr 25 ns V F 0.71 V T J max. 175 C Package Diode variations Single die FEATURES Glass passivated

More information

General Purpose Plastic Rectifier

General Purpose Plastic Rectifier General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to

More information

High Power Density Surface Mount PAR Transient Voltage Suppressors

High Power Density Surface Mount PAR Transient Voltage Suppressors High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR 7.5 V to 12 V) 3 W P

More information

Schottky Barrier Rectifiers

Schottky Barrier Rectifiers Schottky Barrier Rectifiers FEATURES Guardring for overvoltage protection Very small conduction losses Extremely fast switching Low forward voltage drop DO-204AL (DO-4) High frequency operation Solder

More information

Transient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C.

Transient Voltage Suppression Diodes Axial Leaded 5000W > TP5KP series. Features. Bi-directional 5000 W 8.0 W 400 A 3.5 V. -55 to 150 C. TP5KP Series RoHS Pb e3 Description The TP5KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

200W, 5V - 100V Surface Mount Transient Voltage Suppressor

200W, 5V - 100V Surface Mount Transient Voltage Suppressor 200W, 5V - 100V Surface Mount Transient Voltage Suppressor FEATURES Photo Glass passivated junction Low power loss, high efficiency Ideal for automated placement Excellent clamping capability Typical I

More information

Surface Mount Glass Passivated Junction Rectifier

Surface Mount Glass Passivated Junction Rectifier -xxx, GL4x Surface Mount Glass Passivated Junction Rectifier SUPERECTIFIER DO-23AB PRIMARY CHARACTERISTICS I F(AV).0 A V RRM (-xxx, GL4x) 50 V to 00 V, 50 V to 600 V I FSM 30 A I R μa E AS 5 mj V F. V,.2

More information

1SMA5.0AT3G Series. TVS Diodes. Surface Mount > 400W > 1SMA5.0AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.

1SMA5.0AT3G Series. TVS Diodes. Surface Mount > 400W > 1SMA5.0AT3G Series. Bi-directional. Cathode. Anode. Uni-directional. SMA5.0AT3G Series Pb Description The SMA5.0AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge

More information

Fast Avalanche SMD Rectifier

Fast Avalanche SMD Rectifier BYG2K-E3/HE3, BYG2M-E3/HE3 Fast Avalanche SMD Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV).5 A V RRM 8 V, V I FSM 3 A I R. μa V F.6 V t rr 2 ns E R 2 mj T J max. 5 C Package SMA (DO-24AC) Diode

More information

Surface Mount Power Voltage-Regulating Diodes

Surface Mount Power Voltage-Regulating Diodes Surface Mount Power Voltage-Regulating Diodes DO-24AC (SMA) FEATURES Low profile package Ideal for automated placement Low Zener impedance Low regulation factor Meets MSL level, per J-STD-2, if maximum

More information

BYG10D, BYG10G, BYG10J, BYG10K, BYG10M, BYG10Y Standard Avalanche SMD Rectifier

BYG10D, BYG10G, BYG10J, BYG10K, BYG10M, BYG10Y   Standard Avalanche SMD Rectifier BYGD, BYGG, BYGJ, BYGK, BYGM, BYGY Standard Avalanche SMD Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV).5 A 2 V, 4 V, 6 V, 8 V, V RRM V, 6 V I FSM 3 A I R. μa V F.5 V E R 2 mj T J max. 5 C Package

More information

P6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional

P6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

More information

CREAT BY ART 1A, 30V - 60V Surface Mount Schottky Barrier Rectifiers V RRM I F(AV)

CREAT BY ART 1A, 30V - 60V Surface Mount Schottky Barrier Rectifiers V RRM I F(AV) A, 30V - 60V Surface Mount Schottky Barrier Rectifiers SS3M - SS6M FEATURES - Very low profile - typical height of 0.68mm - Low power loss, high efficiency - Ideal for automated placement - Compliant to

More information

Ultrafast Avalanche SMD Rectifier

Ultrafast Avalanche SMD Rectifier Ultrafast Avalanche SMD Rectifier SMA (DO-24AC) PRIMARY CHARACTERISTICS I F(AV) 2. A V RRM 5 V, V, 2 V I FSM 35 A I R. μa V F at I F. V t rr 25 ns E R 2 mj T J max. 5 C Package SMA (DO-24AC) Diode variations

More information

TP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series

TP6KE Series. TVS Diodes Axial Leaded 600W > TP6KE series TP6KE Series RoHS Pb e3 AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Parameter Symbol Value Unit Peak Pulse Power Dissipation by /μs Test Waveform (Fig.2) (Note ) 6 W Steady State Power Dissipation

More information

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion

Transient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other

More information

Surface Mount ESD Protection Diodes

Surface Mount ESD Protection Diodes Surface Mount ESD Protection Diodes 1 2 MARKING (example only) 20278 17249 XX YY Bar = cathode marking YY = type code (see table below) XX = date code 22623 DESIGN SUPPORT TOOLS click logo to get started

More information

SLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description

SLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power

More information

High Current Density Surface Mount Ultrafast Rectifiers

High Current Density Surface Mount Ultrafast Rectifiers High Current Density Surface Mount Ultrafast Rectifiers esmp Series PRIMARY CHARACTERISTICS I F(AV).0 A V RRM 0 V, 50 V, 200 V t rr 25 ns V F 0.90 V T J max. 75 C Package Diode variations Single die FEATURES

More information

Glass Passivated Ultrafast Plastic Rectifier

Glass Passivated Ultrafast Plastic Rectifier Glass Passivated Ultrafast Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability condition Cavity-free glass-passivated junction Ideal for printed circuit

More information

Ultrafast Avalanche SMD Rectifier

Ultrafast Avalanche SMD Rectifier Ultrafast Avalanche SMD Rectifier DO-24AC (SMA) FEATURES Low profile package Ideal for automated placement Glass passivated pallet chip junction Low reverse current Low forward voltage Soft recovery characteristic

More information

Fast Switching Plastic Rectifier

Fast Switching Plastic Rectifier Fast Switching Plastic Rectifier TO-0AC ITO-0AC FEATURES Glass passivated chip junction Superfast recovery time for high efficiency Low leakage current High forward surge capability BY9 Series CASE TO-63AB

More information

Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. SMBJ5.(C)A - SMBJ17(C)A 6W SURFACE MOUNT TRANSIENT OLTAGE SUPPRESSOR Features

More information

Fast Avalanche SMD Rectifier

Fast Avalanche SMD Rectifier BYG2K-E3/HE3, BYG2M-E3/HE3 Fast Avalanche SMD Rectifier DO-24AC (SMA) FEATURES Low profile package Ideal for automated placement Glass passivated pallet chip junction Low reverse current Soft recovery

More information

Surface Mount Ultrafast Plastic Rectifier

Surface Mount Ultrafast Plastic Rectifier Surface Mount Ultrafast Plastic Rectifier SMC (DO-24AB) PRIMARY CHARACTERISTICS I F(AV) 3. A V RRM 4 V, 6 V I FSM 25 A t rr 5 ns V F.5 V T J max. 75 C Package SMC (DO-24AB) Diode variation Single FEATURES

More information