AXTAL CONSULTING. Company Presentation. Feb
|
|
|
- Abel Day
- 5 years ago
- Views:
Transcription
1 AXTAL CONSULTING Company Presentation Feb
2 Personal Profile Bernd Neubig Establishment of AXTAL CONSULTING in April 2002 as a Company for Design and Consulting Services in the Field of Frequency Control Products and Piezoelectric Sensors. March 2004: Laboratory moved to the Ideenwerkstatt in Mosbach September 2011: Laboratory moved to Mosbach Diedesheim Prior to founding AXTAL: Vice President of Tele Quarz (later Corning Frequency Control, now Vectron) since Established the oscillator and filter product line at Tele Quarz, with full responsibility including R&D, operations and engineering. Since 1989 granted power of procuration. Prior to joining TQ: 7 years with KVG (Kristallverarbeitung Neckarbischofsheim), a manufacturer of frequency controlled products. Positions as crystal design engineer and later R&D manager for oscillators and filters. Feb
3 Personal Profile Bernd Neubig 1969 Graduation as Diplom Engineer (Dipl. Ing.) for Telecommunications at the University of Applied Sciences in Berlin. Study of Physics at the Technical University in Berlin, graduation as Diplom Physicist (Dipl. Phys.) in Chairman of the German Section of IEC TC 49 Standardization Committee, Member of the Scientific Committee of the European Time and Frequency Forum (EFTF). Member of the Technical Program Committee of the IEEE Frequency Control Symposium (FCS) More than 30 scientific and technical publications, Co author of a book on Frequency Control components ( Das Grosse Quarzkochbuch, 1997) Lecturer of seminars on quartz crystals, oscillators, filters and related frequency control components November 2004: Recipient of the IEC 1906 Award from the International Electrotechnical Commission (IEC) June 2006: Recipient of the David P. Larsen Award of the Piezoelectric Devices Association (PDA) USA April 2010: Recipient of the DKE Needle Award for long term voluntary engagement and for the contributions to the standardization in the field of Frequency Control Feb
4 Location AXTAL CONSULTING Administration, Headquarter: Buchfinkenweg 8 D Lobbach Lab Mosbach: Roemerring 9 D Mosbach Germany Phone: +49(6261) Fax: +49(6261) E Mail: consult@axtal.com Web: consulting.com. Frankfurt. Heidelberg. Lobbach. Mosbach Feb
5 AXTAL Consulting Business Independent Test House and Consulting Company for Services in the field of Quartz Crystal Products, Ceramic Resonators, and Piezo Sensors Feb
6 Company Profile AXTAL Consulting offers Consulting Services for application and design of Frequency Control Products (FCP), i.e. quartz crystal units, LGS and GaPO 4 crystal resonators, crystal oscillators, filters, and piezoelectric sensors AXTAL Consulting helps suppliers and users to optimise the match between product and application, and thus reduces the risk of failures in the volume application and in the field in an early stage. AXTAL Consulting provides failure analyses, suggests corrective actions, and assists its customers in process audits of manufacturing lines AXTAL Consulting is an independent test house for FCP, offering testing, screening and characterization of FCP according to acknowledged IEC, MIL, Automotive and ESA Standards, e.g. measurement of linear and non linear electrical parameters, temperature tests, phase noise and short term stability tests aging tests mechanical and environmental tests Feb
7 Company Profile AXTAL Consulting executes qualification approvals of Frequency Control Products based on IEC and IEC and 3 (crystals), IEC (filters) IEC (oscillators), AEC Q200 (automotive), and MIL PRF 3098 (crystals) and MIL PRF (oscillators) IPC 610 for workmanship AXTAL Consulting organises training courses and seminars on Frequency Control Products and their application Feb
8 Markets served AXTAL CONSULTING: Users of Frequency Control Products, mainly suppliers of Automotive high reliability, e.g. downhole, off shore telecommunication, industrial electronics, and military electronics Electronic Manufacturing Services Distributors and Re sellers of Frequency Control Products Manufacturers of Frequency Control Products Sensor Applications Feb
9 Consulting: Crystal Units Qualification testing based on IEC & 3, AEC Q200 and MIL PRF 3098 Leak test Isolation resistance High temperature storage Temperature cycling Other environmental tests on request Test and measurement compliant to IEC x Frequency, resistance, motional parameters, load resonance, pullability Start up behaviour (Drive Level Dependence DLD) Temperature tests 55 C ~ +125 C, Hysteresis Frequency Dips and Activity Dips (band breaks) over load & over temperature Spurious resonances Aging tests, passive and active Feb
10 Consulting: Crystal Units Application & Design Support Oscillator circuit characterization Failure Analysis, electrical and visual Application of Piezoelectric Resonators based on new materials Langasite (LGS), Langatate (LGT), and Gallium Phosphate (GaPO 4 ) Feb
11 Consulting: Oscillators Qualification testing based on IEC and MIL PRF Frequency, frequency/load and frequency/voltage coefficient Waveform & Output spectrum Pulling range, AM and FM modulation response Start up behaviour, start up time, Stabilization time, re trace, time domain behaviour Phase noise, short term stability (Allan variance) Temperature tests 55 C ~ +125 C, hysteresis, activity dips (band breaks), Aging tests Temperature cycling, Leak test, environmental tests (on request) Feb
12 Consulting: Filters Qualification testing based on IEC Frequency response of attenuation, phase, group delay Bandwidth, ripple, insertion attenuation, selectivity, shape factor, ultimate attenuation, spurious attenuation Reflection attenuation, VSWR Intermodulation Temperature tests 55 C ~ +125 C Temperature cycling Leak test Environmental tests (on request) Feb
13 Consulting: Piezo Sensors Bulk Acoustic Wave (BAW) Piezoelectric Sensors and Substrates Surface Acoustic Wave (SAW) Sensors Sensors for High Temperature environment based on Langasite (LGS), Langatate (LGT), and Gallium Phosphate (GaPO 4 ) Piezo transducer modules Feb
14 AXTAL Test Equipment OSCILLATORS: Automatic Temperature Test System for VCXO and TCXO Automatic Temperature Test System for OCXO Automatic OCXO Test System Automatic Aging Test System Cyclic Power oscillator Stress Test System Automatic Oscillator Final Test System Phase Noise Test system (Agilent & Aeroflex) Frequency & Time Interval Analyser Short Term Frequency Stability Test System Modulation Analyzer (R&S) Oscilloscopes (HP/Agilent & Tektronix) Spectrum Analyzers (R&S, Tektronix) Frequency Counters (HP/Agilent, Philips) Network Analyzers (HP5100A, HP3577A) Low Noise Frequency Synthesizers (R&S) Rubidium and Caesium Frequency Standards, GPS Disciplined Rubidium CRYSTALS: Automatic Temperature Test system for crystals (THD and SMD) with NWA Automatic & Manual RT Test system for crystals (THD and SMD) with NWA Automatic Crystal Test System (Kolinker) Crystal Test System 8 khz~200 MHz (Saunders) Active Crystal Aging System (PRA) GENERAL: Leak test system (Trio Tech) Burn In System Vacuum Bake Out (Heraeus) Vibration & Shock test System (TIRA) Temperature Shock Test System (Thermostream) Inspection systems (Vision Engineering), Stereo Microscope with camera Feb
15 Crystal Measurement Systems Feb
16 Oscillator Reliability & Failure Analysis Feb
17 Oscillator Test Bench 1 Feb
18 Oscillator Test Bench 2 Feb
19 Spectrum Analyzer/Synthesizer Modulation Analyzer Feb
20 Test Systems for Phase Noise and Short Term Stability (Allan Deviation) Feb
21 Oscillator Test Bench 3 Precision RLC Meter Feb
22 Oscillator Test Systems Feb
23 Visual Inspection Feb
24 Frequency Standards: Cesium Primary Standard Rubidium and GPSDO Feb
25 Oscillator Aging Test System Feb
26 Accelerated Aging, Vacuum Bake Feb
27 Temperature Test SMD Crystals Feb
28 Temperature Test Through Hole Crystals & Oscillators Feb
29 Temperature Test System (Oscillators) Feb
30 Temperature Test Equipment & Control Feb
31 Temperature Shock Test System Leak Test (Bubble Tester) Feb
32 Shock and Vibration Test System Feb
33 Bag Sealing (Vacuum or N 2 ) Feb
34 Tape & Real Machine Feb
35 Screening Documents Feb
36 Laminar Flow Clean Work Bench Feb
37 SMD Manufacturing Line Stencil Printing, Pick & Place Reflow Soldering Feb
AXTAL CONSULTING Upscreening Services for. Sept
AXTAL CONSULTING Upscreening Services for Frequency Control Products Sept 2016 1 Location AXTAL CONSULTING Administration, Headquarter: Buchfinkenweg 8 D 74931 Lobbach Laboratory Mosbach: Roemerring 9
AXTAL GmbH & Co. KG. May 2017
Company Presentation AXTAL GmbH & Co. KG 1 About AXTAL AXTAL stands for Advanced XTAL Products, where "XTAL" is a common abbreviation of "crystal" AXTAL GmbH & Co. KG is a fully privately owned company,
for Space Applications
AXTAL Oscillators for Space Applications 1 Oscillators for Space Oscillators (PXO, VCXO, TCXO and OCXO) for Space Applications Packaged Crystal Oscillators (SPXO, Clocks) Voltage Controlled Crystal Oscillators
Comparison Of The Characteristics Of Quartz, Langasite and Gallium Phosphate Bulk Acoustic Wave Resonators
Comparison Of The Characteristics Of Quartz, Langasite and Gallium Phosphate Bulk Acoustic Wave Resonators Bernd Neubig* *AXTAL, Buchfinkenweg 8, D-74931 Lobbach, E-Mail: BNeubig@axtal.com 1 Content Scope
EXPERTS FOR CUSTOMIZED FREQUENCY CONTROL PRODUCTS. Flexible TCXO Line. Ultra Low Noise OCXO
CATALOG EXPERTS FOR CUSTOMIZED FREQUENCY CONTROL PRODUCTS Flexible OCXO Line Ultra Low Noise OCXO Low Power Fast Warm up OCXO Vibration Insensitive OCXO Oscillators for Space GHz Crystal Controlled Sources
Flight Model (FM) Lot Acceptance Test Model (LAT) Quartz Crystal. Synthetic HiQ Quartz, SC-cut, HC-35/U 4-point
in Specification AXIOM75SH Rev.: 1 Date: 2018-02-16 Oscillator type: Low Phase Noise OCXO for Space Application (COTS version) Features: Lower cost Commercial Off-The-Shelf version (COTS) Qualified according
CATALOG Issue 01/2018
CATALOG Issue 01/2018 EXPERTS FOR CUSTOMIZED FREQUENCY CONTROL PRODUCTS Flexible OCXO Line Ultra Low Noise OCXO Low Power Fast Warm up OCXO Vibration Insensitive OCXO Oscillators for Space GHz Crystal
VCXOs with wide pull-in range using alternatives to quartz
Bernd Neubig, DK1AG VCXOs with wide pull-in range using alternatives to quartz Frequency generation using a quartz crystal oscillator offers a high degree of stability over a relatively wide range of temperature.
Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
Technical Introduction Crystal Oscillators. Oscillator. Figure 1 Block diagram crystal oscillator
Technical Introduction Crystal s Crystals and Crystal s are the most important components for frequency applications like telecommunication and data transmission. The reasons are high frequency stability,
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC4 series Voltage Controlled Temperature Compensated Crystal Oscillator Features Clipped Sine Wave Output Output Frequencies to 27 MHz Fundamental Crystal Design Optional VCXO Function available Gold
High Temperature Electronics
High Temperature Electronics High Temperature Electronics Crystal Oscillators Packaged Quartz Crystals Real Time Clocks Electronic Module Products www.vectron.com Our Heritage With over 50 years experience
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator
VTC2 Series Voltage Controlled Temperature Compensated Crystal Oscillator Features CMOS Square Wave Output Enable Disable Feature Output Frequencies to 30 MHz Fundamental Crystal Design Optional VCXO function
Lead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V
Description The Q-Tech Analog TCXO encompasses state-of-the-art oscillators with low phase noise, jitter, and tight temperature stability. The TCXO is available in a DIP (QT3003), SMD (QT3013) or Gull
Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output
TX-309 Hi-Rel Temperature Compensated Crystal Oscillator TX-309 Features Radiation Tolerant Small footprint Frequency Range: 0.3 MHZ to 150 MHZ Previous Model: C2501 Applications Reference clock for space
VT-841 VT-841. Temperature Compensated Crystal Oscillator. Description. Applications. Features. Block Diagram. Output V DD.
VT-841 Temperature Compensated Crystal Oscillator VT-841 Description Vectron s VT-841 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output, analog temperature
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4
VT-800 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC4 VT-800 Description Vectron s VT-800 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine
VVC1 VVC2 Voltage Controlled Crystal Oscillator
VVC1 VVC2 Voltage Controlled Crystal Oscillator Features The VVC1 Voltage Controlled Crystal Oscillator VCXO with a CMOS output Small 5.0 X 7.0 X 1.9 mm package Output frequencies to 66 MHz 5.0 or 3.3
Publication II by authors
II Publication II Mikko Puranen and Pekka Eskelinen. Measurement of short-term frequency stability of controlled oscillators. Proceedings of the 20 th European Frequency and Time Forum (EFTF 2006), Braunschweig,
Networks International Corp. NIC Overview NETWORKS INTERNATIONAL CORPORATION. P: (913) F: (913)
Networks International Corp. NIC Overview Company Profile Mission: To develop strategic partnerships with our customers to transfer value and innovation through engineering, design, production and continuous
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
PX-570 High Temperature Crystal Oscillator
PX-570 High Temperature Crystal Oscillator PX-570 Vectron offers a High Temperature Crystal Oscillator (PX-570) product platform for extreme environment applications. In addition to its wide operating
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
VT-840 VT-840. Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator.
VT-840 Temperature Compensated Crystal Oscillator, Voltage Controlled Temperature Compensated Crystal Oscillator VT-840 Description Vectron s VT-840 Temperature Compensated Crystal Oscillator (TCXO) is
Package Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave
Description Q-Tech s High Stability OCXO is a high reliability signal generator that provides an HCMOS or Sine Wave output. The OCXO is available in a Through hole package. A flexible design allows Q-Tech
VX-503 Voltage Controlled Crystal Oscillator
VX3 Voltage Controlled Crystal Oscillator VX3 Features Description The VX3 voltage controlled crystal oscillator expands VI s advanced VCXO performance capabilities while adhering to a package footprint
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator
VSS4 series 3.3 Volt Spread Spectrum CMOS Oscillator Features CMOS output Output frequencies to 168 MHz Tri-state output for board test and debug -10/70 or 40/85 C operating temperature Gold over nickel
Low Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different footprints from 38x38x22 mm (1.5 x1.5 x0.8 ) till 25x22x12
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small
VX-805 Voltage Controlled Crystal Oscillator
VX-805 Voltage Controlled Crystal Oscillator VX-805 Description The VX-805 is a Voltage Control Crystal Oscillator that operates at the fundamental frequency of the internal crystal. The crystal is a high-q
VT-860 Temperature Compensated Crystal Oscillator
VT-860 Temperature Compensated Crystal Oscillator VT-860 Description Vectron s VT-860 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, Clipped sine wave output, analog temperature
Solder Dip Options T = Standard S = Sn60Pb40 G=SAC305. Package 86 =Leaded 80 = Formed Leads 85=SMT. VCXO model
Description Q-Tech s 5x7mm LVCMOS Voltage Controlled Crystal Oscillators consist of an IC operating at a supply voltage 3.3Vdc and a miniature strip quartz crystal that operates at the fundamental frequency.
OX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity
PX-990 Crystal Oscillator Ultra Low Noise and G-Sensitivity PX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency Features 60-120MHz
Vectron International Temperatur sensor specification TFSS433D 1/6
Vectron International Temperatur sensor specification TFSS433D 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Output: 50 Characteristics Remark:
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity VX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator
VCC6-L/V 2.5 or 3.3 volt LVDS Oscillator Features 2.5 or 3.3 V LVDS 3rd Overtone Crystal for best jitter performance Output frequencies to 270 MHz Low Jitter < 1 ps rms, 12kHz to 20MHz Enable/Disable output
TE 300 TCXO Series 300
For this product, a full detailed specification can also be delivered on request. Specific request can be addressed to RAKON info@rakon.fr Product Description This High performance ITAR-Free Flat Pack
STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO
Available at Digi-Key** www.digikey.com STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description Connor-Winfield
Vectron International Filter specification TFS 243E 1/5
Vectron International Filter specification TFS 243E /5 Measurement condition Ambient temperature T A: 23 C Input power level: 0 dbm Terminating impedance: * Input: 350 Ω -3.8 pf Output: 350 Ω -3.8 pf Characteristics
Vectron International Temperatur sensor specification TFSS434B 1/6
Vectron International Temperatur sensor specification TFSS434B 1/6 Measurement condition Ambient temperature: 85 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics
VT-701 Temperature Compensated Crystal Oscillator Previous Vectron Model VTC2
T-701 Temperature Compensated Crystal Oscillator Previous ectron Model TC2 T-701 Description ectron s T-701 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, clipped sine wave output,
Vectron International Filter specification TFS1255A 1/5
Vectron International Filter specification TFS1255A 1/5 Measurement condition Ambient temperature T A: 23 C Input power level: m Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
Vectron International Filter specification TFS246R 1/5
Vectron International Filter specification TFS26R 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedances*): input: 695 Ω -1.9 pf output: 695 Ω -1.9 pf Characteristics
Series T7250-T7258, T9250-T9258, T7001-T7013, T9301-T9313 Extended Temperature/COTS XO, 3.3V
Features 20kHz to 100MHz frequency range 5X7 SMD form factor Hermetically sealed for rugged environmental conditions Extremely wide operating temperature range accommodates harsh environments Crystals
QT93W and QT93P SERIES HIGH-RELIABILITY LVPECL OR LVDS MINIATURE CLOCK OSCILLATORS 2.5 to 3.3Vdc - 40MHz to 250MHz Description
-TECH T9W and T9P SERIES Description -Tech s surface-mount T9 series oscillators consist of a 2.5Vdc and.vdc differential PECL or LVDS output oscillator IC and a round AT high-precision quartz crystal
VS-751 VS-751. Dual Frequency VCSO. Description. Features. Applications. Block Diagram. Vcc COutput Output SAW 1 SAW 2. Vc FS Gnd
VS-751 Dual Frequency VCSO VS-751 The VS-751 is a SAW based voltage controlled oscillator that operates at the fundamental frequencies of the internal SAW filters. These SAW filters are high-q quartz devices
Stability as AXIOM9000 plus low noise high isolation frequency distribution amplifier with 4 to 16 outputs
in Specification AXIOM9000 Rev.: 1 Date: 2016-07-01 Oscillator type: Very High Stability Ultra-Low Noise Reference (D)OCXO in 19 rack (1 HU) with up to 3 outputs Features: Very High Frequency Stability
FTM2 Series HCMOS/TTL OSCILLATORS FOR SPACE APPLICATIONS 0.5MHz to 160 MHz. ( 5 x 3.2 mm, SMD, 2.5 V )
REV LTR DESCRIPTION DATE APPVD. - Orig. Release 6/22/09 RBT A Corrected P/N on Pages 1 and 2 5/08/14 RBT B Revised per ECN 2015-1 9/12/15 RBT C Revised per ECN 2016-1 9/18/16 RBT FTM2 Series HCMOS/TTL
PX-421 Crystal Oscillator
PX-421 Crystal Oscillator PX-421 PX-421 PX-421 PX-421 Features Frequency: 10 KHz to 125 MHz 4 Pin 1/2 DIP Package with Through Hole and SMD lead optio Fully RoHS Compliant * No pure tin is used in this
VX-500 Voltage Controlled Crystal Oscillator
VX-00 Voltage Controlled Crystal Oscillator VX-00 Features 9x14 J-Leaded Surface Mount Package ACMOS, TTL and LVPECL Available with 4 point crystal mount for Harsh Environment Applicatio Military Temperature
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
VT-501 Temperature Compensated Crystal Oscillator Previous Vectron Model VTD3
T-501 Temperature Compensated Crystal Oscillator Previous ectron Model TD3 T-501 Description ectron s T-501 Temperature Compensated Crystal Oscillator (TCXO) is a quartz stabilized, CMOS output, analog
RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications
RFPT705 -- SMD Low Acceleration Sensitivity TCXO / TCVCXO. -- -- A series of surface mountable Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXO) for applications where phase noise
Vectron International Filter specification TFS 125P 1/5
Vectron International Filter specification TFS 125P 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 115 Ω -21 pf Output: 110 Ω -35 pf Characteristics
MD-403 I2C InterfaceOven Controlled Crystal Oscillator
MD-43 I2C InterfaceOven Controlled Crystal Oscillator MD-43 The MD-43 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
Q-TECH CORPORATION khz QT381 AND QT386 SERIES ULTRA-LOW CURRENT, HIGH-TEMPERATURE REAL TIME CLOCK OSCILLATORS 2.5Vdc and 3.3Vdc - 32.
Description Q-Tech s high temperature real time clock oscillators consist of a source clock square wave generator and a miniature strip quartz crystal built in a low profile hermetically ceramic package
Low-G 222 Series OCXO
Low-G 222 Series OCXO The 222 Series is a rugged Oven Controlled Crystal Oscillator ideal for demanding military applications such as UAVs, rotorcraft, and tracked vehicles as well as harsh industrial
Vectron International Filter specification TFS 1575AA 1/5
Vectron International Filter specification TFS 1575AA 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
Low Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different formats from 51x51x25 mm (2 x2 x1 ) till 25x25x12 mm
Performance Specifications. Parameter Min Typ Max Units Condition. ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm
PX-360 Precision Crystal Oscillator PX-360 Features Frequency: 1MHz to 80 MHz 20 Lead Flatpack package Package equivalent of MIL-PRF-55310/21 4-Point resonator mount for high shock & vibration performance
QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
Q-TECH CORPORATION. Description. Features. Applications
Description Q-Tech s high temperature real time clock oscillators consist of a source clock square wave generator and a miniature round or strip quartz crystal built in a low profile hermetically ceramic
VVC4 Voltage Controlled Crystal Oscillator
C4 oltage Controlled Crystal Oscillator Features ectron s Smallest CXO, 5.0 X 3.2 X 1.2 mm High Frequencies to 77.70 MHz 5.0 or 3.3 operation Linearity 10% Tri-State Output for testing Low jitter < 1ps
RK 409. Parameters Conditions/remarks Min Nom Max Unit
For this product, full and detailed specifications can be delivered on request. Specific request can be addressed to RAKON hirel@rakon.com Product Description This stable oscillator is designed for Space
FTTC05 Series LVDS TCXO/VCTCXO FOR SPACE APPLICATIONS 10M Hz to 1400MHz. ( 5 x 7 mm, SMD, 2.5 V )
REV LTR DESCRIPTION DATE APPVD. - Orig. Release 01/16/10 JSN A Revised per ECN 2012-1 11/09/12 JSN B Revised per ECN 2014-1 03/26/14 JSN C Revised per ECN 2016-2 10/21/16 JSN FTTC05 Series LVDS TCXO/VCTCXO
PRODUCT SELECTION GUIDE
PRODUCT SELECTION GUIDE Crystals Tuning Fork Crystals Clock Oscillators VCXO, VCSO TCXO, OCXO GPS Synchronization VCO, PLL SAW Devices Ceramic Resonators Microwave Filters RALTRON MIAMI R&D and Manufacturing
Vectron International Filter specification TFS 1632A 1/5
Vectron International Filter specification TFS 1632A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 183 Ω -0,42 pf Output: 45 Ω -0,47 pf Characteristics
MX-600 Microprocessor Controlled Crystal Oscillator High Precision
MX-600 Microprocessor Controlled Crystal Oscillator High Precision MX-600 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-40
TELEFILTER Filter Specification TFS 141 C 1/5
TELEFILTER Filter Specification TFS 4 C /5 Measurement condition Ambient Temperature: 23 C Input Power Level: 0 dbm Terminating Impedance at fc*: input:,25 kω // -9,4 pf output:,36 kω // -9,9 pf Characteristics
Performance Specifications. Frequency Stabilities 1 ( MHz) -20 to +70 C -40 to +85 C -40 to +95 C Residual error compare to fit curve
MD-403 I2C InterfaceOven Controlled Crystal Oscillator MD-403 The MD-403 is a Vectron module that contains a medium size ovenized crystal oscillator and an I 2 C interface that communicates with an onboard
EMI Reduction Spread Spectrum Clock Oscillators 3HM572 Series Group R
The most efficient way to reduce EMI (Electromagnetic Interference) is to reduce it from its principle source the clock oscillator. Mercury 3HM572, an integrated clock module composed of a spread spectrum
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
Vectron International Filter specification TFS 867A 1/5
Vectron International Filter specification TFS 867A 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
Surface Acoustic Wave Components
Overview 2006 Surface Acoustic Wave Components for RF Control Systems just everywhere... www.epcos.com Applications Automotive n Remote keyless entry n Tire-pressure monitoring n Automotive telematics
FILTRONETICS INC. Quality Technology by Quality People
FILTRONETICS INC. www.filtro.net Quality Technology by Quality People INTRODUCTION Filtronetics, Inc offers a broad line of frequency control products for diverse applications. We have been in business
Solder Dip Option: T = Standard S = Solder Dip (*) Package: 81 = Thru-Hole 82 = Formed Lead 83 = Gull Wing
Description Q-Tech s surface mount 7 x 5 mm oscillator series consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc clock square wave generator and a miniature stripat quartz crystal built in a low profile ceramic
Welcome to the Epson SAW oscillator product training module. Epson has been providing their unique SAW oscillators that exhibit outstanding
Welcome to the Epson SAW oscillator product training module. Epson has been providing their unique SAW oscillators that exhibit outstanding stability, ultra low jitter and the ability to oscillate at a
V-Type Voltage Controlled Crystal Oscillator (VCXO)
Product Data Sheet V-Type Voltage Controlled Crystal Oscillator (VCXO) Features Output Frequencies to 77.760 MHz 5.0 or 3.3 volt operation Tri-State Output Jitter Performance 12MHz) VCXO
MX-503 High Precision Microprocessor Controlled Crystal Oscillator
MX-503 High Precision Microprocessor Controlled Crystal Oscillator MX-503 Features Ultra High Stability MCXO Low Power Consumption Meets Stratum 3 acc. GR-1244 ROHS 6 Compliant Frequency Range 1 : 8-50
Vectron International Filter specification TFS 942G 1/5
Vectron International Filter specification TFS 942G 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM
3HM57 Group R A DROP-IN REPLACEMENT SOLUTION FOR YOUR EMI / EMC COMPLIANCE PROBLEM The principle sources of the EMI problem come from the system clocks. Therefore, rather than patch the problem with ferrite
Vectron International Resonator Specification TFR 832 1/5
Vectron International Resonator Specification TFR 832 1/5 Measurement condition Ambient temperature: 25 C Input power level: 0 dbm Terminating impedance: Input: 50 Ω Output: 50 Ω Characteristics Remark:
ATS/ATS-SM Leaded or Surface Mount Quartz Crystal
Leaded or Surface Mount Quartz Crystal FEATURES Standard HC-49/US or HC-49/US SM Low Profile Package Options Stable Frequency Over Temperature and Drive Level Fundamental and 3 rd Overtone Crystals Frequency
VM2000. Low-Noise Bottom Port Piezoelectric MEMS Microphone Data Sheet Vesper Technologies Inc. Differential Analog Output
VM2000 2017 Data Sheet Vesper Technologies Inc. Low-Noise Bottom Port Piezoelectric MEMS Microphone VM2000 Vesper offers the world s first differential analog piezoelectric MEMS microphone. VM2000 provides
Solder Dip Option: T = Standard S = Solder Dip (*) Package
Description Q-Tech s surface mount 7 x 5 mm oscillator series consist of an IC 5Vdc, 3.3Vdc, 2.5Vdc, 1.8Vdc clock square wave generator and a miniature strip AT quartz crystal built in a low profile ceramic
CXOQ CXOQ 1.8V CXOQ 2.5V CXOQ 3.0V CXOQ 3.3V
CXOQ Statek s ultra miniature and ultra low profile CXOQ oscillators consist of a CMOS/TTL compatible hybrid circuit and a state-ofthe-art, miniature, fundamental-mode crystal. Model Name Description CXOQ
Vectron International Filter specification TFS 600 1/5
Vectron International Filter specification TFS 600 /5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 270 Ω -0,8 pf Output: 285 Ω -0,8 pf Characteristics
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 2096 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 200 Ω -0.38 pf Output: 75 Ω Characteristics
Vectron International Filter specification TFS 121 1/5
Vectron International Filter specification TFS 121 1/ Measurement condition Ambient temperature: 23 Input power level: 0 dbm Terminating impedance: * Input: 130 Ω II 1,7 pf Output: 130 Ω II 1,7 pf Characteristics
VS-708 Single Frequency VCSO
VS-708 Single Frequency VCSO VS-708 Description The VS-708 is a Voltage Controlled SAW Oscillator that operates at the fundamental or a fraction of the internal SAW filter frequency. The SAW component
MORION, Inc. Quartz Frequency Control Products: quartz oscillators. Product Catalogue. September 2010
ОАО «МОРИОН» (С-Петербург) ISO9001:2000 Q 29.07.28 MORION, Inc. (St. Petersburg) СВС.01.431.0072.05 MORION, Inc. Quartz Frequency Control Products: quartz oscillators. Product Catalogue September 2010
QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
FTTC15 Series CMOS/Clipped sinewave Output TCXO/VCTCXO. FOR SPACE APPLICATIONS 2M Hz to 100 MHz. ( 7x5 mm, 3.3 V )
REV LTR DESCRIPTION DATE APPVD. - Orig. Release 01/16/10 JSN A Revised per ECN 2012-1 11/09/12 JSN B Revised per ECN 2014-1 03/26/14 JSN C Revised per ECN 2016-2 10/21/16 JSN FTTC15 Series CMOS/Clipped
VS-800 Ultra-Low Jitter High Frequency VCSO
VS-800 Ultra-Low Jitter High Frequency VCSO VS-800 Description The VS-800 is a Voltage Controlled SAW Oscillator that operates at the fundamental frequency of the internal SAW resonator. The SAW resonator
Vectron International Filter specification TFS1220 1/5
Vectron International Filter specification TFS1220 1/5 Measurement condition Ambient temperature: 23 C Input power level: 0 dbm Terminating impedance: * Input: 146 Ω -0.9 pf Output: 146 Ω -0.9 pf Characteristics
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
Vectron International Filter specification TFS /5
Vectron International Filter specification TFS 1575 1/5 Measurement condition Ambient temperature: 23 C Input power level: dbm Terminating impedance: Input: 5 Ω Output: 5 Ω Characteristics Remark: The
AXTAL Application Note AXAN 101
AXTAL Application Note AXAN 101 Miniature Temperature Sensor Crystals RKTV206 The miniature temperature sensor crystals RKTV206 with a diameter of only 2 mm allows the high resolution precision measurements