RK 409. Parameters Conditions/remarks Min Nom Max Unit
|
|
|
- Mariah Moore
- 5 years ago
- Views:
Transcription
1 For this product, full and detailed specifications can be delivered on request. Specific request can be addressed to RAKON Product Description This stable oscillator is designed for Space Clocks, Navigation and Positioning Systems and is used in such applications as GNSS receivers, digital cards, board calculators, down and up converters, synthesizers. The AV (Allan Variance) variant of the RK409 has a short term stability of at 1 s. This frequency source is featured by remarkable overall frequency stability vs. temperature range up to ± 0.5 ppb under vacuum and ± 20 ppb per year. The RK409 is available with different packages, in a small format (50x50x30mm) and is manufactured following the guidelines of MIL PRF (Class 1, type 4 or type 6, level S or B). Features Frequency Range: 10 to 40 MHz Allan 1s: Supply Voltage: 12 or +15 V Warm up consumption: 7 Watt Steady state consumption: 3 W under vacuum and 4 W under atmospheric pressure Frequency stability vs. operating temperature range: ± 0.5 ppb under vacuum Out Output wave form: sine 50 Ω Ageing : ± 150 ppb over 15 years at 10 MHz Output level: from 2 to 10 dbm Component selected as per ECSS Q ST 60C Materials selected as per ECSS Q 70 Manufactured following the guidelines of: o MIL PRF (Class 1, type 4, level S or B) o ECSS Q ST 70 08C and ECSS Q ST 70 38C Weight: 125 g (GP variant)/170 g (AV variant) Applications Heritage Transponders GNSS receivers SPACEBUS 4000 SATCOM Specifications Navigation Converters HTV HIMAWARI 1. Environmental c onditions Parameters Conditions/remarks Min Nom Max Unit Option A C Operating Temperature Option B C Option C C Switch on Temperature TSo C Non Operating Temperature TNOp C Random Vibration Level as per MIL STD 202, Method 214, condition I J (46.30 Grms) Sine Vibration Level as per MIL STD 202, Method 214, condition D (20 G) Mechanical shock as per MIL STD 202, Method 213, Condition E (half sine with a Shocks peak acceleration of 1000g for duration of 0.5 msec) TID : 100 krad, low dose rate Radiation No SEL up to LET=60 MeV/mg/cm² 1 / 7
2 2. Electrical interface Parameters Conditions/remarks Min Nom Max Unit Option V Power supply Option V FLoad Impedance Reference voltage V Control voltage Vc 0 Vref V MHz 3.1. Allan Variance (AV) option Parameters Conditions/Remarks Min Typ Max Unit Nominal Frequency MHz Steady state input current power 20 C 4 W Warm up supply power 8 W Initial frequency accuracy Frequency pulling Option 2 ± 10 ppb Frequency adjustment Positive slope ± 500 ppb Frequency stability vs temperature supply voltage load Frequency variation vs Option A ± 0.5 ppb Option B ± 1 ppb Option C ± 5 ppb pressure ± 50 ppb Frequency ageing Over 1 year ± 20 ppb (10 MHz) Over 15 years ± 150 ppb 1s 6.E 13 Allan variance 10s 1.E 12 Frequency warm up 30 mn Output waveform Sine Output level EOL 2 10 dbm Harmonics level and subharmonics 30 dbc Non harmonics level 85 dbc Phase 10 MHz 1 Hz 110 dbc/hz 10 Hz 135 dbc/hz 100 Hz 145 dbc/hz 1kHz 150 dbc/hz 10 khz 155 dbc/hz 2 / 7
3 3.2. General Purpose (GP) option Space Oven Controlled Crystal Oscillator Parameters Conditions/Remarks Min Typ Max Unit Nominal Frequency MHz Steady state input current power 20 C 3 W Warm up supply power 7 W Initial frequency accuracy Frequency pulling Option 2 ± 10 ppb Frequency adjustment Positive slope ± 500 ppb Frequency stability vs temperature supply voltage load Frequency variation vs Option A ± 0.5 ppb Option B ± 1 ppb Option C ± 10 ppb pressure ± 50 ppb Frequency ageing Over 1 year ± 20 ppb (10 MHz) Over 15 years ± 150 ppb 1s 1.E 12 Allan variance 10s 2.E 12 Frequency warm up 30 mn Output waveform Sine Output level EOL 2 10 dbm Harmonics level and subharmonics 30 dbc Non harmonics level 85 dbc Phase noise 1 Hz 105 dbc/hz 10 Hz 135 dbc/hz 100 Hz 145 dbc/hz 1kHz 150 dbc/hz 10 khz 155 dbc/hz 4. Mechanical features Package name Description Dimensions Wheight PT1 Pin Through Hole 50x50x30 mm SS1 Sub D+SMA 50x55x30 mm 3 / 7
4 4.1. Package PT1 (Pin Through hole) Pin number Name Function 1 Alarm option 0 Not connected Alarm option 1 Oven alarm 2,6 GND Ground 3 Fout Frequency output 4 Vc Voltage control 5 Vref Reference voltage 7 Vcc Power supply 4 / 7
5 4.2. Package SS1 (Sub D+SMA) Pin number Name Function 1 Vc Voltage control 2,4,12 Not connected 3 Alarm option 0 Not connected Alarm option 1 Oven alarm 6,7,8,13,14,15 GND Ground 5,9,10 Vcc Power supply 11 Vref Reference voltage SMA connector Fout Frequency output 5 / 7
6 5. Model philosophy Space Oven Controlled Crystal Oscillator Representativeness Engineering Engineering Qualification Flight Model Flight Model + Model Qualification Model Lot Acceptance Model test Options A B, C D E, F, G, H I Components Passive commercial parts, Active parts from the same manufacturer of HiRel parts Mil Grade parts procured from the same manufacturer of HiRel parts HiRel Parts HiRel Parts HiRel Parts Crystal material Mechanical interface Flight representative in form fit function Flight representative in form fit function ESCC3501 ESCC3501 ESCC3501 Flight design Flight design Flight design Electrical interface Flight design Flight design Flight design Flight design Flight design Tests Acceptance Qualification Qualification (including screening) Acceptance (including screening) Acceptance (including screening)+ LAT 6. Options for Engineering Qualification Model (EQM) Option B: production manufacturing, qualification flow including qualification mechanical tests Option C: production manufacturing, electrical tests only 7. Flight Model (FM) screened following the guidance of MIL PRF Option E: full level S Option F: level S with combined burn in aging of 480 hours Option G: full level B Option H: level B with combined burn in aging of 480 hours Option I: level S with 1 pc/batch Lot Acceptance test could be performed on all screening options 8. Deliverable documentation Test data Full specification Certificate of Conformity (CoC) 6 / 7
7 9. Ordering part number definition The part number breakdown is defined as follows: AV PT1 A A 10M Rakon Series OCXO (4xx) 10 9 stability class Performance AV = focus on Short Term stability GP = General Purpose Package PT1 = 50x50x30 Pin Through SS1 = 50x55x30 Sub D + SMA Temperature range/stability A = 5 C to +60 C, ± 0.5 ppb B = 20 C to +70 C, ± 1 ppb C = 40 C to +70 C, ± 5 ppb Supply voltage 12 = 12V 15 = 15V Frequency pulling 1 = internal calibration 2 = voltage controlled Oven Alarm 0 = No 1 = Yes Model Options A = EM B = EQM full environmental C = EQM reduced environmental D = QM E = FM level S F = FM level S with combined BI aging G = FM level B H = FM level B with combined BI aging I = FM + group C Frequency, Fnom 7 / 7
TE 300 TCXO Series 300
For this product, a full detailed specification can also be delivered on request. Specific request can be addressed to RAKON info@rakon.fr Product Description This High performance ITAR-Free Flat Pack
Space Xtal Oscillator TE 100 XO Series 100
For this product, a full detailed specification can also be delivered on request. Specific request can be addressed to RAKON info@rakon.fr Product Description This SMD Space XO is designed for space clock
Low Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different formats from 51x51x25 mm (2 x2 x1 ) till 25x25x12 mm
Low Noise Oscillator series LNO 100 OCXO LNO 100
Specific request can be addressed to RAKON info@rakon.fr Product Description This Low Noise Oven Controlled Crystal Oscillator available in different footprints from 38x38x22 mm (1.5 x1.5 x0.8 ) till 25x22x12
Flight Model (FM) Lot Acceptance Test Model (LAT) Quartz Crystal. Synthetic HiQ Quartz, SC-cut, HC-35/U 4-point
in Specification AXIOM75SH Rev.: 1 Date: 2018-02-16 Oscillator type: Low Phase Noise OCXO for Space Application (COTS version) Features: Lower cost Commercial Off-The-Shelf version (COTS) Qualified according
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)
O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM) Rev C The DFRM consists of 2 Ultra Low Phase Noise OCXO at 10 MHz and 100 MHz. The module is packaged
Low Noise Oscillator series LNO 4800 B MHz
Specific request can be addressed to RAKON hirel@rakon.com Product Description LNO 4800 B3 is a low noise oscillator generating an output signal at 4800 MHz. It is composed by an OCSO (Oven Controlled
Typical Applications Satellite and Deep Space Radiation Tolerance Required Severe Environmental Conditions. 10 MHz 40 MHz 10, 20 MHz
EX-209 Hi-Reliability Evacuated Miniature Crystal Oscillator EX-209 Features 16 pin Double Dip Package Ruggedized hybrid thick film construction Low Power Consumption Legacy Model: EX-245 Typical Applications
OX-249 Space Qualified Oven Controlled Crystal Oscillator (OCXO)
Common Characteristics [all frequencies and options] Supply voltage 4.75 5.0 5.25 VDC Power consumption (in air) Frequency vs. Temperature (ref. frequency at 60 minutes) Warm-up Accuracy @+25 C, (ref.
Specification AXIOM210 Rev.: 3 Date: Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package
in Specification AXIOM210 Rev.: 3 Date: 2015-02-17 Oscillator type: Ultra-Low Phase Noise OCXO in Vibration-isolated Package Parameter min. typ. max. Unit Condition Frequency range 50 130 MHz Standard
O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2
Product Data Sheet Rev K O-CXM-XXYZXX-X-X-XX-X Precision Ultra Low Phase Noise OCXO in 36x27 mm Europack with optional Adapter to 2 x2 Description O-CX Series is based on Ultra Low Noise 10 MHz reference
O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package
O-CS22-HH-0XYZXX-X-X-X-X Series Precision Ultra Low Phase Noise OCXO in Low Profile 22x25x10 mm SMD package Product Data Sheet Rev E Features SC-cut crystal High Stability Low Profile (10 mm) SMD package
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-304 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-304 The OX-304 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -173 dbc/hz in a compact
Stability as AXIOM9000 plus low noise high isolation frequency distribution amplifier with 4 to 16 outputs
in Specification AXIOM9000 Rev.: 1 Date: 2016-07-01 Oscillator type: Very High Stability Ultra-Low Noise Reference (D)OCXO in 19 rack (1 HU) with up to 3 outputs Features: Very High Frequency Stability
Low-G 222 Series OCXO
Low-G 222 Series OCXO The 222 Series is a rugged Oven Controlled Crystal Oscillator ideal for demanding military applications such as UAVs, rotorcraft, and tracked vehicles as well as harsh industrial
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
OCXO 8600 BVA Oven Controlled Crystal Oscillator
BVA Oven Controlled Crystal Oscillator The 8600-B series is based on the technique of housing a state-of-the-art BVA crystal resonator and its associated oscillator components in double oven technology.
MX-041 Oven Controlled Crystal Oscillator
MX-041 Oven Controlled Crystal Oscillator MX-041 Features Applications SC-Cut resonator Frequency Range: 5 MHZ to 20 MHZ Low Package Height Temperature stability to 0.4 Aging rate 0.1 /day Frequency range
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator
OX-204 at 10 MHz Ultra Low Phase Noise Oven Controlled Crystal Oscillator OX-204 OX-204 The OX-204 is an Ultra Low Phase Noise Ovenized Crystal Oscillator with a noise floor as low as -175 dbc/hz. Designed
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator
OX-043 Low g-sensitivity Oven Controlled Crystal Oscillator OX-043 Features Applications Ultra Low g-sensitivity Low Phase Noise High Stability Frequency Range: 8 MHZ to 15 MHZ Standard Frequency 10 MHz
2.0 FREQUENCY CHARACTERISTICS Line Parameter Test Condition Value Unit 2.1 Nominal frequency range
CFPT9000 -- SMD Temperature Compensated Crystal Oscillator (PLUTO) -- -- A series of surface mountable 7.0x5.0mm Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXOs) for medium to high
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator
OX-046 VHF low g-sensitivity Oven Controlled Crystal Oscillator OX-046 Features Ultra Low G-Sensitivity Low Phase Noise Very High Frequency Frequency Range: 50 MHZ to 250 MHZ Standard Frequency: 100 MHz
Oven Controlled Crystal Oscillator OCXO SERIES 8100
FEATURES IEEE 1588 compatible Frequencies up to 100 MHz ELECTRICAL SPECIFICATIONS Frequency Range* fo 5.000 100.000 MHz Supply Voltage Vs Vs ±5% Power Consumption Warm-up Time Frequency Calibration Frequency
RFPT Specifications. SMD Low Acceleration Sensitivity TCXO / TCVCXO. Product description. Applications
RFPT705 -- SMD Low Acceleration Sensitivity TCXO / TCVCXO. -- -- A series of surface mountable Temperature Compensated Voltage Controlled Crystal Oscillators (TCVCXO) for applications where phase noise
Performance Specifications
OX-208 Oven Controlled Crystal Oscillator OX-208 OX-208 The OX-208 is a high stability ovenized crystal oscillator in a 25 x 25 mm package, capable of aging rates of 0.15 /day and temperature stabilities
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator
OX-175 Ultra Low Noise Oven Controlled Crystal Oscillator OX-175 The OX-175 is a low phase noise, high-frequency ovenized crystal oscillator in a 28 x 38 mm package. The oscillator has a noise floor of
PRELIMINARY. Logic: C = CMOS S = Sine Wave
Description Q-Tech s microcomputer compensated crystal oscillator, MCXO, uses a high stability overtone SC-cut crystal with microprocessor controlled compensation. The self-temperature sensing resonator,
OX-171 Oven Controlled Crystal Oscillator
OX-171 Oven Controlled Crystal Oscillator OX-171 The OX-171 is a high stability ovenized crystal oscillator in a 28 x 38 mm package, capable of aging rates of 0.06 /day and temperature stabilities of 1
Model 865-M Wideband Synthesizer
Model 865-M Wideband Synthesizer Features Wideband Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator
MD-173 High Stability Coefficient Oscillator I C interface Oven Controlled Crystal Oscillator 2 MD-173 The MD-173 is a Microsemi Coefficient Oscillator (CCXO) that contains a high-stability ovenized crystal
SPACE PASSIVE COMPONENT DAYS 2 nd SPCD Edition
SPACE PASSIVE COMPONENT DAYS 2 nd SPCD Edition 10150 JEFFERSON BLVD, CULVER CITY, CA 90232 USA 2 nd 0 2 nd INTERNATIONAL SYMPOSIUM SPACE PASSIVE COMPONENT DAYS ULTRA 3 ULTRA MINIATURE, ULTRA RUGGED, ULTRA
OD100LP-Series Low Phase Noise
OD100LP-Series Low Phase Noise VCOCXO1 Description: The Connor-Winfield OD100LP-series is a low phase noise VCOCXO in a 1x1 inch metal package. The OD100LP-series is designed for those applications that
HELLAS INDUSTRIES. for custom designs since 1980 in. Custom RF Filter & Frequency Control Solutions. Defence Avionics Medical Telecom
HELLAS Custom RF Filter & Control Solutions The Choice for custom designs since 1980 in Monolithic Crystal Filters Discrete Crystal Filters LC Filters Switch Filter assemblies Oscillators INDUSTRIES Defence
Package Type: 0 Through Hole Supply Voltage: V V V Logic: HCMOS Sine Wave
Description Q-Tech s High Stability OCXO is a high reliability signal generator that provides an HCMOS or Sine Wave output. The OCXO is available in a Through hole package. A flexible design allows Q-Tech
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
50W Broadband High Power Amplifier Module 500 2500MHz Electrical Specifications, T A = +25⁰C, Vdd = +28V Features Ultra-broadband Amplifier Module Small and lightweight Supply Voltage: +28V Parameter Min.
Model 845-M Low Noise Synthesizer
Model 845-M Low Noise Synthesizer Features Low phase noise Fast switching down to 20 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency converters
O C X O Oven Controlled Crystal Oscillators
What is an OCXO? Relatively speaking, an OCXO performs in the ±0.01~±0.1 ppm range, a TCXO performs in the ±1~±3 ppm range while a non-compensated clock oscillator performs in the ±25, ±50 ppm range. A
Oven Controlled Crystal Oscillator OCXO SERIES IEEE 1100
ELECTRICAL SPECIFICATIONS Min. Typ. Max. Frequency Range* fo 10.000 50.000 MHz Supply Voltage Vs Vs ±5% Power Consumption Warm-up Time Frequency Calibration Frequency Stability vs. Temperature* 3.135 3.3
STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO
Available at Digi-Key** www.digikey.com STRATUM 3E High Stability Oven Stabilized Oscillator OH300 Series OCXO / VCOCXO US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Description Connor-Winfield
MORION, Inc. Quartz Frequency Control Products: quartz oscillators. Product Catalogue. September 2010
ОАО «МОРИОН» (С-Петербург) ISO9001:2000 Q 29.07.28 MORION, Inc. (St. Petersburg) СВС.01.431.0072.05 MORION, Inc. Quartz Frequency Control Products: quartz oscillators. Product Catalogue September 2010
Rubidium Frequency Standard Model AR133A Ruggedized Low Profile
Rubidium Frequency Ruggedized Low Profile Key Features Long-term-stability: 5E-11/month Short term stability: 2E-12 @ 1000s (Typ.) Phase noise: -158 dbc/hz @10kHz Spurious: < -110 dbc Time Accuracy (1PPS):
OCXO AND CLOCK DISTRIBUTION SYSTEM. As used with VE2ZAZ Controller
OCXO AND CLOCK DISTRIBUTION SYSTEM As used with VE2ZAZ Controller Jacques Audet VE2AZX June 2011 Rev. Jan 2013 REAR BLOCK DIAGRAM MV89A OSCILLATOR MODULE FRONT 12 +12 dbm +15V ZFSC-8-1 +12 dbm +12 dbm
Model 865-M Wideband Synthesizer
Model 865-M Wideband Synthesizer Features Wideband Low phase noise Fast switching down to 15 µs FM, Chirps, Pulse Internal OCXO, external variable reference Single DC supply Applications ATE LO for frequency
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
80W Broadband High Power Amplifier Module 20-1000MHz Electrical Specifications, T A = +25⁰C, VDD = +28V Features Broadband High Power High Efficiency Great Linearity Small Size & Light Weight Low Distortion
EXPERTS FOR CUSTOMIZED FREQUENCY CONTROL PRODUCTS. Flexible TCXO Line. Ultra Low Noise OCXO
CATALOG EXPERTS FOR CUSTOMIZED FREQUENCY CONTROL PRODUCTS Flexible OCXO Line Ultra Low Noise OCXO Low Power Fast Warm up OCXO Vibration Insensitive OCXO Oscillators for Space GHz Crystal Controlled Sources
FTTC05 Series LVDS TCXO/VCTCXO FOR SPACE APPLICATIONS 10M Hz to 1400MHz. ( 5 x 7 mm, SMD, 2.5 V )
REV LTR DESCRIPTION DATE APPVD. - Orig. Release 01/16/10 JSN A Revised per ECN 2012-1 11/09/12 JSN B Revised per ECN 2014-1 03/26/14 JSN C Revised per ECN 2016-2 10/21/16 JSN FTTC05 Series LVDS TCXO/VCTCXO
Rubidium Frequency Standard Model AR133A Ruggedized Low Profile
Ruggedized Low Profile Key Features Long-term-stability: 5E-11/month 2E-12 frequency accuracy & 100nSec 1PPS accuracy relative to 1PPS input when disciplined Short term stability: 5E-12 @ 100s Phase noise:
2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit.
RFPO45 G.8263 1.0 Specification References a. Rakon part number (Doc ID) M6635LF (514241) b. 25.0MHz MERC 9x7 HOT CMOS 3.3V c. Version 1 (2014-04-01) d. Package 9.7 x 7.5 x 4.3 mm max. 2.0 Absolute Maximum
Performance Specifications. Frequency Stabilities Supply Voltage (Vs) ma ma. RF Output
TX-309 Hi-Rel Temperature Compensated Crystal Oscillator TX-309 Features Radiation Tolerant Small footprint Frequency Range: 0.3 MHZ to 150 MHZ Previous Model: C2501 Applications Reference clock for space
GPS-Disciplined-Rubidium Clock AR70A-00
GPS-Disciplined-Rubidium Clock Miniature GPS-Rubidium Main Features Rubidium clock disciplined to GPS Outputs: 10MHz, 1PPS Inputs: External 1PPS, GPS antenna Time Accuracy: 100ns relative to GPS Frequency
CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. 3.3, 5.0, 12.0 or 15.0Vdc. CMOS Sine. CMOS Sine. 3.3, 5.0, 12.0 or 15.0Vdc. LVDS (1 to 4 pairs) 3.
Q-TECH Q-Tech is the leading supplier of crystal controlled oscillators for space applications. Q-Tech has 40 years space heritage, is AS9100 certified, is the leading QPL supplier to MIL-PRF-55310 class
Advancements in Quartz Based Oscillator Technologies Advanced Timing for High Speed Connectivity
Advancements in Quartz Based Oscillator Technologies Advanced Timing for High Speed Connectivity 2015 2017 Rakon Limited 0 CONFIDENTIAL INFORMATION Topics Background Resonator Improvements Profile, Power
DS H01 DIGITAL SYNTHESIZER MODULE SYSTEM SOLUTIONS. Features Applications 174 x 131 x 54 mm. Technical Description
DS H01 The DS H01 is a high performance dual digital synthesizer with wide output bandwidth specially designed for Defense applications where generation of wideband ultra-low noise signals along with very
Rakon Product Proposal
IT2200A -- SMD Temperature Compensated Crystal Oscillators -- -- Low cost SMD TCXO with voltage control option using an analogue IC for compensation. Frequencies ranging from 10MHz to 52MHz. -- Product
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator
VS-701 High Shock Discrete Voltage Controlled SAW Oscillator VS-701 The VS-701 VCSO (Voltage Controlled Saw Oscillator from Vectron is a high frequency, ultra low phase noise oscillator designed to support
Lead Finish: T = Standard S = Solder Dip (**) Package Type: 0 = DIP-14 1 = SMD 2 = Gull Wing Supply Voltage: 3 = +3.3V 5 = +5.0V
Description The Q-Tech Analog TCXO encompasses state-of-the-art oscillators with low phase noise, jitter, and tight temperature stability. The TCXO is available in a DIP (QT3003), SMD (QT3013) or Gull
CMOS/LVCMOS HF VCXO AE-X32BXX-X Series
CMOS/LVCMOS HF VCXO Description The AE-X32BXX Series of voltage controlled crystal oscillators (VCXO) provides high frequency with CMOS/LVCMOS output. The device does not use any frequency multiplication,
Microsemi Space Time and Frequency Products
Power Matters. TM Microsemi Space Time and Frequency Products Microsemi Space Forum 2015 Peter Cash, Director of Space Defense and Advanced Technology Ashley Pollock, Business Development Manager 1 Agenda
FTTC15 Series CMOS/Clipped sinewave Output TCXO/VCTCXO. FOR SPACE APPLICATIONS 2M Hz to 100 MHz. ( 7x5 mm, 3.3 V )
REV LTR DESCRIPTION DATE APPVD. - Orig. Release 01/16/10 JSN A Revised per ECN 2012-1 11/09/12 JSN B Revised per ECN 2014-1 03/26/14 JSN C Revised per ECN 2016-2 10/21/16 JSN FTTC15 Series CMOS/Clipped
Model 865 RF / Ultra Low Noise Microwave Signal Generator
Model 865 RF / Ultra Low Noise Microwave Signal Generator Features Excellent signal purity: ultra-low phase noise and low spurious Combination of highest output power and fastest switching Powerful touch-display
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity
VX-990 Voltage Controlled Crystal Oscillator Ultra Low Noise and G-Sensitivity VX-990 Ultra low Phase Noise Ultra low G-Sensitivity Vibration hardened Tight Tolerances Frequency Range Standard Frequency
Rakon Product Proposal
RTX5032A -- SMD Temperature Compensated Crystal Oscillator -- -- High performance TCXO offering excellent Phase Noise, Frequency Stability and VCO tilt compensation. -- Product description -- The RTX5032A
CATALOG Issue 01/2018
CATALOG Issue 01/2018 EXPERTS FOR CUSTOMIZED FREQUENCY CONTROL PRODUCTS Flexible OCXO Line Ultra Low Noise OCXO Low Power Fast Warm up OCXO Vibration Insensitive OCXO Oscillators for Space GHz Crystal
OX-200 Oven Controlled Crystal Oscillator
OX-200 Oven Controlled Crystal Oscillator OX-200 Features Reflow Process Compatible AT-Cut and SC-Cut Crystal Options Low Profile Compact Package Applications Base Stations Test Equipment Synthesizers
AOM Driver A35-Series
AOM Driver A35-Series 5 Watt RF Drivers for Acousto-Optic Modulators The A35xxx RF driver series provides up to 5 Watt output power. Various types cover a frequency range from 40 to 350 MHz. The maximum
HIGH-VALUE PHASE-LOCKED COAXIAL RESONATOR OSCILLATOR
OSCILLATOR SECTION HIGH-VALUE PHASE-LOCKED COAXIAL RESONATOR OSCILLATOR BCO SERIES: 0.20 4 GHz (Fundamental) 4 16 GHz (Multiplied) FEATURES Low cost Phase locked to external standard or internal crystal
INC. MICROWAVE. A Spectrum Control Business
DRO Selection Guide DIELECTRIC RESONATOR OSCILLATORS Model Number Frequency Free Running, Mechanically Tuned Mechanical Tuning BW (MHz) +10 MDR2100 2.5-6.0 +10 6.0-21.0 +20 Free Running, Mechanically Tuned,
PXI MICROWAVE LOCAL OSCILLATOR MODULE
The PXI-1450B Local Oscillator Module is a PXI 3U, 2-slot synthesizer module intended for frequency down conversion applications. The PXI-1450B is a VCO-based, 3 to 9 GHz synthesizer that uses QuickSyn
RFPT Specifications. The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. Product description
RFPT200 -- The CHARON is a SPI controlled high accuracy TCXO with embedded timer and alarm function. -- -- The Charon is a high stability 7x5 SMD Digitally Controlled Temperature Controlled Crystal Oscillator
Performance Specifications
OX-280 Oven Controlled Crystal Oscillator OX-280 Features Surface Mount Package AT-CUT and SC_CUT Crystal Options Low Profile Compact Package Compact Package Applications Base stations Test equipment Synthesizers
Radar transponders. WORK Microwave GmbH Raiffeisenstrasse Holzkirchen Germany
Radar transponders WORK Microwave GmbH Raiffeisenstrasse 12 83607 Holzkirchen Germany Tel. Fax E-Mail +49 8024 6408 0 +49 8024 6408 40 sales@work-microwave.com Table of Contents 1 Introduction... 3 1.1
QTCT570 SERIES 5 x 7mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to MHz Description
Description Q-Tech s surface-mount QTCT570 oscillators consist of an IC 2.8Vdc, 3.3Vdc clock TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range
RF, COAXIAL. HYBRID COUPLERS POWER DIVIDERS and DIRECTIONAL COUPLERS GENERIC SPECIFICATION
1/ 23 Titre / Title RF, COAXIAL HYBRID COUPLERS POWER DIVIDERS and DIRECTIONAL COUPLERS GENERIC SPECIFICATION Written by Responsibility Date Signature P. THIBAUD Space Project manager 29/01/10 Verified
Package (**) 0 = 24 Pin Double DIP 1 = 24 Pin Flatpack 2 = 32 Pin Flatpack
Description Q-Tech Space Qualified, 00kRad(Si) Tolerant Hybrid Oscillators are Class 2 Hybrids per MIL-PRF-5530. These CMOS and Wave TCXOs are hermetically sealed in a 24 pin Double Dual In-Line, 24 pin
QTCT220 SERIES 2.0 x 2.5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 3.3Vdc MHz to 52.
5PeNdTbfTaY Q-Tech s surface-mount QTCT220 oscillators consist of an IC 3.3Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from 10.000MHz
for Space Applications
AXTAL Oscillators for Space Applications 1 Oscillators for Space Oscillators (PXO, VCXO, TCXO and OCXO) for Space Applications Packaged Crystal Oscillators (SPXO, Clocks) Voltage Controlled Crystal Oscillators
Frequency Synthesizer
50Ω 3700 MHz (fixed) The Big Deal Low phase noise and spurious Fixed frequency without external programming Integrated microcontroller Robust design and construction Case size 2.75" x 1.96" x 0.62" CASE
2.0 Absolute Maximum Ratings 1 Parameter Min. Max. Unit. a. Storage temperature C b. Supply voltage (VDD) V
E7157LF 1.0 Specification References a. Rakon part number E7157LF b. 100.0MHz RHT1490A TCVCXO c. Version D (2016-12-12) PROVISIONAL d. Package 14.4 x 9.2 x 4.7 mm max. 2.0 Absolute Maximum Ratings 1 Min.
00136 A DOC F. Specification, Hybrid TCXO REV DESCRIPTION DATE PREP APPD F CO /8/17 DF/SM HW. Hi-Rel Standard
REV DESCRIPTION DATE PREP APPD F CO-28470 11/8/17 DF/SM HW Specification, Hybrid TCXO MOUNT HOLLY SPRINGS, PA 17065 THE RECORD OF APPROVAL FOR THIS DOCUMENT IS MAINTAINED ELECTRONICALLY WITHIN THE ERP
VXIbus Local Oscillator
20309 Phase Matrix, Inc ṬM Instruments You Can Count On VXIbus Local Oscillator High-Performance Microwave Local Oscillator Generation for VXIbus Systems 3 to 9 GHz Frequency Range Multi-Stage Downconversion
+Vin. Input Return. +Vin. Input Return
PD-97874A SF461 SERIES EMI FILTER HYBRID-HIGH RELIABILITY Description SF461 Series is part of the International Rectifier HiRel family of products. The SF461 Series EMI filter is designed to provide full
Trusted in High-Reliability Timing and Frequency Control
Frequency and Timing Space Products Trusted in High-Reliability Timing and Frequency Control Strong Space Heritage Superior Reliability and Precision Frequency and Timing Solutions Trusted in High Reliability
GPS Time and Frequency Reference Receiver
$ GPS Time and Frequency Reference Receiver Symmetricom s 58540A GPS time and frequency reference receiver features: Eight-channel, parallel tracking GPS engine C/A Code, L1 Carrier GPS T-RAIM satellite
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module. Datasheet SignalCore, Inc.
SC5306B 1 MHz to 3.9 GHz RF Downconverter Core Module Datasheet 2015 SignalCore, Inc. support@signalcore.com SC5306B S PECIFICATIONS Definition of Terms The following terms are used throughout this datasheet
EX-421 Evacuated Miniature Crystal Oscillator
EX-421 Evacuated Miniature Crystal Oscillator EX-421 Description The EX-421 provides exceptionally low aging rates and tight temperature stabilities in an extremely small package over a wide range of environmental
125 Series FTS375 Disciplined Reference and Synchronous Clock Generator
Available at Digi-Key www.digikey.com 125 Series FTS375 Disciplined Reference and Synchronous Clock Generator 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851- 4722 Fax: 630-851- 5040 www.conwin.com
Parameter Conditions & Remarks Min Typical Max Unit. Warm up Steady 25 C Load Output to Ground pf
Model 1380100XXX Features Industry standard 20 x 12.7 mm SMT package Stratum 3E per GR1244CORE 3.3V operation Low Phase Noise Tape and Reel packaging Applications Telecom Switching Wireless Communication
RF-LAMBDA LEADER OF RF BROADBAND SOLUTIONS
100W Coaxial Microwave Power Amplifier 20MHz~520MHz Features Small signal open loop gain: 50dB Output power 100W typical Electrical Specifications, T A = +25 C Typical Applications Suitable for RFI, EMC
SPACE COAXIAL SWITCHES
SPace SECTION CONTENTS SECTION 6 GENERAL INFORMATION... 6-1 low power models... 6-2 to 6-9 HIGH power models... 6-10 to 6-15 RADIALL SPECIFICATIONS... 6-16 GENERAL INFORMATION / SPECIFICATIONS Radiall
QTCT350 SERIES 3.2 x 5mm MINIATURE SMD TEMPERATURE CONTROLLED CRYSTAL OSCILLATORS 2.8 to 5.0Vdc MHz to 52.
Description Q-Tech s surface-mount QTCT350 oscillators consist of an IC 3.3Vdc, 5.0Vdc TCXO built in a low profile ceramic package with gold plated contact pads. Features ECCN: EAR99 Frequency range from
Model 855 RF / Microwave Signal Generator
Features Very low phase noise Fast switching Phase coherent switching option 2 to 8 phase coherent outputs USB, LAN, GPIB interfaces Applications Radar simulation Quantum computing High volume automated
QuickSyn Frequency Synthesizers
QuickSyn Frequency Synthesizers FSL mmw Series This series offers models FSL-2740, FSL-5067, and FSL-7682, which extend QuickSyn Lite synthesizers into the millimeterwave range. The three available models
Model 149 Stratum 3E, 9x14 mm OCXO
Features 10 to 50 MHz Frequency Range Compliant to Stratum 3E of GR1244CORE Surface Mount 3.3V or 5.0V operation Low Jitter/Phase Noise Tape and Reel Packaging Applications Telecom Switching Wireless Communication
Vector Network Analyzers ZVB
Specifications Version 05.00 Vector Network Analyzers ZVB September 2005 Specifications MEASUREMENT RANGE...3 MEASUREMENT SPEED...5 MEASUREMENT ACCURACY...6 EFFECTIVE SYSTEM DATA...8 TEST PORT OUTPUT...8
Ultra-Low Phase Noise OCXO
APPLICATIONS: COTS Military & Industrial Radios & Timing Circuits Cellular Infrastructure Radar Systems Test & Measurement Equipment GPS Tracking with precision hold-over accuracy WiMax / WLAN Precision
FTM2 Series HCMOS/TTL OSCILLATORS FOR SPACE APPLICATIONS 0.5MHz to 160 MHz. ( 5 x 3.2 mm, SMD, 2.5 V )
REV LTR DESCRIPTION DATE APPVD. - Orig. Release 6/22/09 RBT A Corrected P/N on Pages 1 and 2 5/08/14 RBT B Revised per ECN 2015-1 9/12/15 RBT C Revised per ECN 2016-1 9/18/16 RBT FTM2 Series HCMOS/TTL
IQXT IQXT is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package.
IQXT-205-2 IQXT-205-2 is a 2.0 x 1.6mm SMD Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO) in a hermetically sealed package. Model Name IQXT-205-2-18 IQXT-205-2-25 IQXT-205-2-28
±0.1 ppm ±5 % ±0.1 ppm ±10 % 10 kω // 10 pf
Nominal frequency Fo Frequency stability: vs. temperature reference to (FMAX+FMIN)/2 vs. supply voltage changes reference to frequency at nominal supply vs. load changes reference to frequency at nominal
C
Typical Applications Base Stations Test Equipment Synthesizers Digital Switching Features Surface Mount Package Optional Reflow Process Compatible Optional AT-Cut and SC-Cut Crystal Options Low Profile
TX-705 Temperature Compensated Crystal Oscillator
TX-705 Temperature Compensated Crystal Oscillator TX-705 Features Applications The TX-705 is a TCXO family designed for applications where superior g-sensitivity and good phase noise together with small