VRD Series. AnaSem. High speed, Low dropout, ±1% High output accuracy CMOS Voltage Regulator with Dual output. Analog Semiconductor IC.
|
|
|
- Silvester Walker
- 5 years ago
- Views:
Transcription
1 安纳森 Analog Semiconductor IC High speed, Low dropout, ±% High output accuracy CMOS Voltage Regulator with Dual output (IMPORTANT: Please check the last page for Genuine Product Labeling) Rev. E- Website: Tel:
2 Rev. E- Products Data Sheet Analog Semiconductor IC High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator GENERAL DESCRIPTIONS The VRD series are dual positive voltage regulators with high speed, low voltage dropout and high accuracy output achieved by low current consumption. Because each regulator is completely separated, the crosstalk between each regulator can be reduced. The output voltage is guaranteed within ±% within the given temperature range by Vref controlling the temperature characteristic. It corresponds to the low ESR capacitor as an output stabilization capacitor. The charged ESR capacitor can be discharged with an internal switch by making the CE=VSS, as a result the VOUT quickly returns to the VSS level. To make the current capacity of the output transistor not exceeded, the over-current protection circuit is built in. HALOGEN RoHS COMPLIANCE FEATURES Output voltage range.8v~.v (selectable with a step of.v) Operating voltage range.v~.v High accuracy output voltage ±% (Vout=.9V~.V) / ±mv (Vout=.8V~.9V) Maximum output current ma / Channel Dropout voltage Typ.9mV (output=.v, IOUT=mA) Low current consumption Typ. µa / Channel High ripple rejection Typ. db at KHz Low ESR capacitor. µf ceramic capacitor Operating temperature range C ~ +8 C Built-in over-current protector Limit current : ma CL high-speed auto-discharge Built-in On/Off circuit Small package SOT- (.9.8.mm), LLP- (.8..mm) APPLICATIONS Battery powered devices Cellular phone Digital / Video cameras Portable games Handheld instruments
3 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator PRODUCTS NUMBERING GUIDE VRD Discharge function Package form Function specification Output voltage Ch- Output voltage Ch- X : Auto discharge T : SOT- L : LLP- L / M / N / P * Refer to the following selection table. 8 ~ : Selectable with a step of.v in the range of.8v ~.V e.g.) J :.8V, :.V * Refer to the following selection table. Function specification selection table Symbol VR VR Function Specification L ±mv ±mv VOUT=.8V~.9V / VOUT=.8V~.9V M ±mv ±% VOUT=.8V~.9V / VOUT=.9V~.V N ±% ±mv VOUT=.9V~.V / VOUT=.8V~.9V P ±% ±% VOUT=.9V~.V / VOUT=.9V~.V Output voltage selection table Symbol Voltage Symbol Voltage Symbol Voltage Symbol Voltage Symbol Voltage A. A. A. A..... B. B. B. B..... C. C. C. C..... D. D. D. D..... E. E. E. E..... F. F. F. F..... G. G. G. G..... H. H. H. H J.8 J.8 J.8 J.8 J K.9 K.9 K.9 K.9 K
4 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator PIN CONFIGURATION / MARKING SPECIFICATION (SOT-) - Vout Vss Vout A B C D E F G G G G EN Vin EN (Top view) Pin Configuration No. Symbol Descriptions EN -Channel enable VIN Voltage input EN -Channel enable VOUT -Channel output VSS Power ground VOUT -Channel output Marking Specification Code Mark Contents A D Products series name BC 8~ -Ch output voltage DE 8~ -Ch output voltage F X Discharge function G Internal rule Lot number PIN CONFIGURATION / MARKING SPECIFICATION (SOT-) - Vout Vss Vout A B C D E F F F F EN Vin EN (Top view) Pin Configuration No. Symbol Descriptions EN -Channel enable VIN Voltage input EN -Channel enable VOUT -Channel output VSS Power ground VOUT -Channel output Marking Specification Code Mark Contents A D Products series name BC 8~ -Ch output voltage DE 8~ -Ch output voltage F Internal rule Lot number
5 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator PIN CONFIGURATION / MARKING SPECIFICATION (LLP-) Vout Vout Vss A B C D E F G G G G EN Vin EN (Top view) Pin Configuration No. Symbol Descriptions EN -Channel enable VIN Voltage input EN -Channel enable VSS Power ground VOUT -Channel output VOUT -Channel output Marking Specification Code Mark Contents A D Products series name BC 8~ -Ch output voltage DE 8~ -Ch output voltage F X Discharge function G Internal rule Lot number
6 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator BLOCK DIAGRAM VIN VOUT VOUT Over-current Protector Over-current Protector Voltage Reference + _ Voltage Reference + _ Vss EN EN ABSOLUTE MAXIMUM RATINGS Note : Items Symbol Ratings Unit Input voltage range VIN. ~ +. V Output current IOUT ma Output voltage range VOUT VSS. ~ VIN +. V SOT- PD mw Power dissipation ) LLP- PD mw Operating temperature range TOPR ~ +8 C Storage temperature range TSTG ~ + C ) Power dissipation depends on conditions of mounting on boards. PCB dimension is mm mm.mm. TYPICAL APPLICATION CIRCUITS EN VOUT CL = µf EN VSS VOUT VIN CL = µf CIN = µf
7 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator ELECTRICAL CHARACTERISTICS (Ta= C unless otherwise specified) Items Symbol Conditions Min. Typ. Max. Unit Test circuit Output voltage VOUT VOUT+.V VIN.V IOUT=mA Ta= C ~ +8 C VOUT.9V VOUT.99 VOUT VOUT. VOUT.9V - + mv V.9V VOUT.V - - ma.v VOUT.V - - ma.v VOUT.V - - ma Output current IOUT VIN VOUT+.V.V VOUT.8V - - ma.9v VOUT.V - - ma.v VOUT.V - - ma.v VOUT.V - - ma.9v VOUT.V mv.v VOUT.V - mv.v VOUT.V - mv Dropout voltage VDROP IOUT=mA.V VOUT.8V - mv.9v VOUT.V - 9 mv.v VOUT.V - 8 mv.v VOUT.V - 8 mv
8 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator ELECTRICAL CHARACTERISTICS (CONTINUED) (Ta= C unless otherwise specified) Items Symbol Conditions Min. Typ. Max. Unit Test circuit Current consumption IDD VIN=VOUT+.V, VOUT=Open, IOUT=mA - 8 µa Standby current ISTB EN=VSS -.. µa Input voltage VIN. -. V Load regulation VOUT VIN=VOUT+.V, IOUT=.mA ~ma - mv Line regulation VOUT / VIN VOUT VOUT+.V VIN.V, IOUT=mA -.. %/V Ripple rejection Rr VIN=VOUT+.V, f=khz, VRIP=.VP-P, IOUT=mA - - db Limit current ILIMIT EN=VIN - - ma Short circuit current ISHORT VIN=VOUT+.V, VOUT=V - - ma Output voltage temperature coefficient VOUT / Ta VOUT VEN=VIN, IOUT=mA Ta= C ~ +8 C ± ppm / C EN high level voltage VENH. -. V EN low level voltage VENL - -. V EN high level current IENH VEN= VIN. -. µa EN low level current IENL VEN= VSS. -. µa CL auto-discharge resistance RDIS VIN=.V, VOUT=.V, VEN= VSS - - Ω
9 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TEST CIRCUITS Circuit () - Output voltage, Output current, Dropout voltage, Input voltage, Load regulation, Line regulation, Limit current, Short circuit current, Output voltage temperature coefficient, CL auto-discharge resistance, EN high level voltage, EN low level voltage, EN high level current, EN low level current VIN VOUT A CL V IOUT V A EN VIN CIN VOUT A IOUT A EN VSS CL V A Circuit () - Current consumption, Standby current VIN VOUT CL VIN V CIN EN VOUT EN VSS CL Circuit () - Ripple rejection VIN VOUT A CL V IOUT V EN VOUT A IOUT EN VSS CL V 8
10 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator DESCRIPTION OF OPERATION General operation In reference to following a part of the block diagram of output voltage control of the VRD series ; *) VIN VOUT Over-current Protector R R DIS V FEEDBACK Voltage Reference V REF + _ Error Amp. R VSS EN By the error amplifier, the reference voltage (V REF ) is compared with V FEEDBACK which is divided by feedback resistors R and R. It supplies the output transistor (see note *) to keep a stabilized output voltage against with any fluctuation of input voltage by negative feedback system. Note *) The VRD series has P-channel MOSFET which is connected to the VOUT terminal as the output transistor. To prevent the VRD series from being damaged due to inverse current from VOUT terminal to VIN terminal through a parasitic diode, VOUT should not be exceeded VIN+.V. EN terminal (shutdown function) & CL auto-discharge The VRD series can be shutdown through EN terminal. The P-channel MOSFET is turned off and operation of all internal circuits stops to reduce the current consumption when the signal of EN terminal is set to the shutdown level. In shutdown mode, the VRD series enables the electric charge at the CL to be discharged via the auto-discharge resistance (R DIS ; Ω), and the VOUT terminal can be rapidly returned to the VSS level as a result. Output capacitor (CL) For phase compensation, an output capacitor (CL) is required to connected between VOUT terminal and VSS terminal as close as possible. A ceramic capacitor with capacitance value of at least.µf is recommended. Of course, the suitable capacitance value should be different by the condition of each application. In addition, an input capacitor (CIN) with capacitance value of at least.µf is also recommended between VIN terminal and VSS terminal for stable input power. Over current protection and short circuit protection Built-in over current protection circuit performs circuit protection from over current as a current limiter. When the load current reaches the limit level, the output voltage drops and output current also decreases accordingly. A current of typ. ma will flow when output terminal is shorted. 9
11 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS vs. Output Current VRD (VOUT=.V) VRD (VOUT=.V) EN=VIN, Ta= C, CIN=CL=.µF Out Current : IOUT (ma) VIN=EN=VOUT+.V, CIN=CL=.µF. VIN=.V Ta=+ C VIN=.V. Ta= C VIN=.V Ta=+8 C Out Current : IOUT (ma) VRD (VOUT=.8V) VRD (VOUT=.8V). EN=VIN, Ta= C, CIN=CL=.µF. VIN=EN=VOUT+.V, CIN=CL=.µF.8.. VIN=.8V VIN=.9V VIN=.V VIN=.V. Ta=+ C Ta= C Ta=+8 C Out Current : IOUT (ma).8. Out Current : IOUT (ma)
12 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS vs. Output Current (continued) VRD (VOUT=.8V) VRD (VOUT=.8V). EN=VIN, Ta= C, CIN=CL=.µF. VIN=EN=VOUT+.V, CIN=CL=.µF..... VIN=.8V Ta=+ C VIN=.9V. Ta= C VIN=.V Ta=+8 C Out Current : IOUT (ma).... Out Current : IOUT (ma) VRD (VOUT=.V) VRD (VOUT=.V). EN=VIN, Ta= C, CIN=CL=.µF. VIN=EN=VOUT+.V, CIN=CL=.µF Out Current : IOUT (ma) VIN=.V VIN=.V VIN=.V Out Current : IOUT (ma) Ta=+ C Ta= C Ta=+8 C
13 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS vs. VRD (VOUT=.V) VRD (VOUT=.). EN=VIN, Ta= C, CIN=CL=.µF. EN=VIN, Ta= C, CIN=CL=.µF ma. ma ma ma ma ma VRD (VOUT=.8V) VRD (VOUT=.8V). EN=VIN, Ta= C, CIN=CL=.µF. EN=VIN, Ta= C, CIN=CL=.µF ma ma ma ma ma ma
14 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS vs. (continued) VRD (VOUT=.8V) VRD (VOUT=.8V). EN=VIN, Ta= C, CIN=CL=.µF. EN=VIN, Ta= C, CIN=CL=.µF.9... ma ma ma ma ma ma VRD (VOUT=.V) VRD (VOUT=.V). EN=VIN, Ta= C, CIN=CL=.µF. EN=VIN, Ta= C, CIN=CL=.µF ma ma ma..... ma. ma ma
15 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Dropout Voltage vs. Output Current VRD (VOUT=.V) VRD (VOUT=.8V). EN=VIN, CIN=CL=.µF. EN=VIN, CIN=CL=.µF Dropout Voltage : VDROP (V) Output Current : IOUT (ma) Ta=+ C Ta= C Ta=+8 C Dropout Voltage : VDROP (V) Output Current : IOUT (ma) Ta=+ C Ta= C Ta=+8 C VRD (VOUT=.8V) VRD (VOUT=.V) Dropout Voltage : VDROP (V) EN=VIN, CIN=CL=.µF Ta=+ C Ta= C Ta=+8 C Dropout Voltage : VDROP (V) EN=VIN, CIN=CL=.µF Ta=+ C Ta= C Ta=+8 C Output Current : IOUT (ma) Output Current : IOUT (ma)
16 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS vs. Ambient Temperature VRD (VOUT=.V) VRD (VOUT=.8V). VIN=EN=VOUT+.V, IOUT=mA, CIN=CL=.µF.9 VIN=EN=VOUT+.V, IOUT=mA, CIN=CL=.µF Ambient Temperature : Ta ( C). - - Ambient Temperature : Ta ( C) VRD (VOUT=.8V) VRD (VOUT=.V).9 VIN=EN=VOUT+.V, IOUT=mA, CIN=CL=.µF. VIN=EN=VOUT+.V, IOUT=mA, CIN=CL=.µF Ambient Temperature : Ta ( C) Ambient Temperature : Ta ( C)
17 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Supply Current vs. Ambient Temperature (Total value of VR & VR) VIN=EN=VOUT+.V Supply Current : IDD (µa) Ambient Temperature : Ta ( C) VR=.V / VR=.V VR=.V / VR=.V VR=.8V / VR=.V VR=.V / VR=.8V TYPICAL CHARACTERISTICS Cross Talk. VOUT=.V, VOUT=.V Ch Ch VIN=.V, IOUT=. ma, IOUT=mA Tr/Tf=µs, Ta= C, CIN=CL=. µf... (VR) : VOUT (V)..... (VR) (VR)..... (VR) : VOUT (V)... Time (ms/div).
18 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Supply Current vs. VRD (VOUT=.V) VRD (VOUT=.8V) Supply Current : IDD (µa) EN=VIN, EN=GND, CIN=CL=.µF Ta=+ C Ta= C Ta=+8 C Supply Current : IDD (µa) EN=VIN, EN=GND, CIN=CL=.µF Ta=+ C Ta= C Ta=+8 C VRD (VOUT=.8V) VRD (VOUT=.V) Supply Current : IDD (µa) EN=VIN, EN=GND, CIN=CL=.µF Ta=+ C Ta= C Ta=+8 C Supply Current : IDD (µa) EN=VIN, EN=GND, CIN=CL=.µF Ta=+ C Ta= C Ta=+8 C
19 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Load Transient Response VRD (VOUT=.V) VRD (VOUT=.8V). VIN=EN=VOUT+.V Tr=Tf=µs, Ta= C, CIN=CL=.µF.9 VIN=EN=VOUT+.V Tr=Tf=µs, Ta= C, CIN=CL=.µF Output Current Output Current : IOUT (ma) Output Current Output Current : IOUT (ma). Time (µs/div). Time (µs/div) VRD (VOUT=.8V) VRD (VOUT=.V).9 VIN=EN=VOUT+.V Tr=Tf=µs, Ta= C, CIN=CL=.µF. VIN=EN=VOUT+.V Tr=Tf=µs, Ta= C, CIN=CL=.µF Output Current Output Current : IOUT (ma) Output Current Output Current : IOUT (ma). Time (µs/div). Time (µs/div) 8
20 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Input Transient Response (Iout=mA) VRD (VOUT=.V) VRD (VOUT=.8V) VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF. VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF Time (µs/div). - Time (µs/div). VRD (VOUT=.8V) VRD (VOUT=.V) VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF Time (µs/div). Time (µs/div). 9
21 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Input Transient Response (Iout=mA) VRD (VOUT=.V) VRD (VOUT=.8V) VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF. VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF Time (µs/div). - Time (µs/div). VRD (VOUT=.8V) VRD (VOUT=.V) VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF. VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF Time (µs/div). Time (µs/div).
22 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Input Transient Response (Iout=mA) VRD (VOUT=.V) VRD (VOUT=.8V) VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF. VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF Time (µs/div). - Time (µs/div). VRD (VOUT=.8V) VRD (VOUT=.V) VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF. VIN=EN, Tr=Tf=µs, Ta= C, CIN=CL=.µF Time (µs/div). Time (µs/div).
23 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Input Rise Time (Iout=mA) VRD (VOUT=.V) VRD (VOUT=.8V) VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF. VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF Time (µs/div) - Time (µs/div) VRD (VOUT=.8V) VRD (VOUT=.V) VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF 9 8 Time (µs/div) Time (µs/div)
24 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Input Rise Time (Iout=mA) VRD (VOUT=.V) VRD (VOUT=.8V) VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF. VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF Time (µs/div) - Time (µs/div) VRD (VOUT=.8V) VRD (VOUT=.V) - - VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF Time (µs/div) - Time (µs/div)
25 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Input Rise Time (Iout=mA) VRD (VOUT=.V) VRD (VOUT=.8V) VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF. VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF Time (µs/div) - Time (µs/div) VRD (VOUT=.8V) VRD (VOUT=.V) VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF VIN=EN, Tr=µs, Ta= C, CIN=CL=.µF 9 8 Time (µs/div) Time (µs/div)
26 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS EN Rise Time (Iout=mA) VRD (VOUT=.V) VRD (VOUT=.8V) VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF. VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF EN EN - Time (µs/div) - Time (µs/div) VRD (VOUT=.8V) VRD (VOUT=.V) VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF 8 VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF EN EN 8 Time (µs/div) Time (µs/div)
27 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS EN Rise Time (Iout=mA) VRD (VOUT=.V) VRD (VOUT=.8V) VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF. VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF EN EN - Time (µs/div) - Time (µs/div) VRD (VOUT=.8V) VRD (VOUT=.V) VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF 8 VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF EN EN 8 Time (µs/div) Time (µs/div)
28 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS EN Rise Time (Iout=mA) VRD (VOUT=.V) VRD (VOUT=.8V) VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF. VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF EN EN - Time (µs/div) - Time (µs/div) VRD (VOUT=.8V) VRD (VOUT=.V) VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF 8 VIN=VOUT+.V Tr=µs, Ta= C, CIN=CL=.µF EN EN 8 Time (µs/div) Time (µs/div)
29 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TYPICAL CHARACTERISTICS Ripple Rejection Rate VRD (VOUT=.V) VIN=EN=(VOUT+.)Vdc+.Vp-pac IOUT=mA, Ta= C, CIN=CL=.µF VRD (VOUT=.8V) VIN=EN=(VOUT+.)Vdc +.Vp-pac IOUT=mA, Ta= C, CIN=CL=.µF Ripple Rejection Rate : RR (db) 9 8 Ripple Rejection Rate : RR (db) Ripple Frequency : f (KHz) Ripple Frequency : f (KHz) VRD (VOUT=.8V) VIN=EN=(VOUT+.)Vdc +.Vp-pac IOUT=mA, Ta= C, CIN=CL=.µF VRD (VOUT=.V) VIN=EN=(VOUT+.)Vdc +.Vp-pac IOUT=mA, Ta= C, CIN=CL=.µF Ripple Rejection Rate : RR (db) 9 8 Ripple Rejection Rate : RR (db) Ripple Frequency : f (KHz) Ripple Frequency : f (KHz) 8
30 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator PACKAGE DIMENSIONS (SOT-).9±..~. (Unit : mm).8±. a a a (Marked Side) a a a ± ~ Min. ~..9±. a =. +.. Flat length =. min. Recommended land pattern ±..~ ~
31 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TAPING AND LOADING SPECIFICATIONS (SOT-) (Unit : mm).±..±. Mark ø. +. Mark.±..±. REEL DIMENSIONS (SOT-) (Unit : mm) 9.±. ø±. ø±.±..±..±. Taping direction ø8± 8.±..±.. Max..8±. (, pcs / reel) 9.±.
32 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator PACKAGE DIMENSIONS (LLP-) (Unit : mm).8±..±..±..±..±. (Marked Side) (.) (.)..±..±. (.).±. *.±. (.) (.) (.) Max.. (Typ..).±. Recommended land pattern
33 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator TAPING AND LOADING SPECIFICATIONS (LLP-) (Unit : mm).±..±. Mark ø. +. Mark.±..±. REEL DIMENSIONS (LLP-) (Unit : mm) 9.±. ø±. ø±.±..±. ø.±..±..±. ø8± 8.±..±. Taping direction (, pcs / reel) 9.±.
34 may change the products described in this data sheet, or may discontinue production or services without any notice in order to supply the best products through improve the design and performance. Customers are recommended to obtain the latest data or information before placing orders in order to make sure the data or information required is the newest. It is necessary for customers to fully understand the products described in this data sheet and to use it in accordance with its specifications. The products described in this data sheet are not intended to use for the apparatus which have influence on human lives due to the failure or malfunction of the products. Corp. is not responsible for any support to customer s application, product design, software performance, patent infringement or service. Corp. does not disclose or imply a guarantee or description about being licensed based on patents, copy-rights, circuit location license, or other intellectual properties associated with the devices or combinations in which the products or service of Corp. are used or can be used, or which cover the methods. Customers should not export, directly or indirectly, any products without obtaining required licenses and approvals in advance from appropriate government agencies.
35 Rev. E- High speed, Low dropout, ±% High output accuracy Dual CMOS Voltage Regulator GENUINE PRODUCT LEGITIMATE LABEL DEFINITION Green colored Circle RoHS Label Other specific customized Labels Ordinary Product Information Bar Our internal Outgoing Check Code Code Our Internal QR Check Code Logo and Brand Name (Black color Logo) Our Internal Product Check Code Genuine labels MUST include our correct contact information as shown
VRH Series. AnaSem. High speed, Low dropout, ±1% High output accuracy CMOS Voltage Regulator with On/Off circuit. Analog Semiconductor IC.
安纳森 Analog Semiconductor IC High speed, Low dropout, ±% High output accuracy CMOS Voltage Regulator with On/Off circuit (IMPORTANT: Please check the last page for Genuine Product Labeling) Rev. E- Website:
VRR Series. AnaSem. High speed, Low dropout, ±1% High output accuracy CMOS Voltage Regulator with On/Off circuit. Analog Semiconductor IC. AnaSem Inc.
AnaSem Analog Semiconductor IC High speed, Low dropout, ±% High output accuracy CMOS Voltage Regulator with On/Off circuit Rev. E9- Rev. E9- AnaSem Products Data Sheet Analog Semiconductor IC High speed,
VDD Series. AnaSem. Low voltage, Low power, ±1% High detect accuracy CMOS Voltage Detector with Delay circuit. Analog Semiconductor IC.
安纳森 Analog Semiconductor IC Low voltage, Low power, ±1% High detect accuracy CMOS Voltage Detector with Delay circuit (IMPORTANT: Please check the last page for Genuine Product Labeling) Rev. E13-1 Website:
XC6401 Series FEATURES
XC1 Series ETR9_7 Dual LDO Regulators, Low ESR Cap. Compatible GENERAL DESCRIPTION The XC1 series are highly accurate, Dual, low noise, CMOS LDO voltage regulators. Performance features of the series includes
APPLICATIONS Mobile Phones Cordless phones and radio communication equipment Portable games Cameras, Video recorders Portable Audio Equipment PDAs
Low Power Consumption : μa (TYP.) Dropout Voltage : mv @ ma : mv @ma Range :.8V to.v Output Current : More than ma (ma limit) Low Output Noise High Ripple Rejection Rate Low ESR capacitor compatible GENERAL
XC6401 Series FEATURES. TYPICAL PERFORMANCE CHARACTERISTICS Interactive Load Transient Response TYPICAL APPLICATION CIRCUITS
XC Series ETR9_ Dual LDO Regulators, Low ESR Cap. Compatible GENERAL DESCRIPTION The XC series are highly accurate, Dual, low noise, CMOS LDO voltage regulators. Performance features of the series includes
XC6214 Series. FEATURES Maximum Output Current APPLICATIONS. TYPICAL PERFORMANCE CHARACTERISTICS Dropout Voltage vs. Output Current XC6214P332
XC6 Series ETR8_ ma Output Current, High Speed LDO Regulators, Thermal Shutdown Function, Ceramic Capacitor Compatible GENERAL DESCRIPTION The XC6 series are highly precise, low noise, high current, positive
*1. Attention should be paid to the power dissipation of the package when the load is large.
Rev.3._ HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR Features The S-L298 series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy, and low current consumption
A6304A. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION TYPICAL APPLICATION
DESCRIPTION The series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard
*1. Attention should be paid to the power dissipation of the package when the load is large. *2. Refer to Product Name Structure for details.
www.sii-ic.com HIGH RIPPLE-REJECTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Seiko Instruments Inc., 21-21 Rev.5._ The S-L298 series is a positive voltage regulator with a low dropout voltage, high output
XC6234 Series APPLICATIONS TYPICAL APPLICATION CIRCUIT TYPICAL PERFORMANCE CHARACTERISTICS. 200mA High Speed LDO Regulator with ON/OFF Switch 1/23
ETR367-2 ma High Speed LDO Regulator with ON/OFF Switch GENERAL DESCRIPTION The series is a ma high speed LDO regulator that features high accurate, high ripple rejection and low dropout. The series consists
MRY1518E Series. AnaSem. 12.5msec High speed detection, 1.5mT High sensitivity CMOS MR Magnetic Sensor Switch. Analog Semiconductor IC.
安纳森 Analog Semiconductor IC 1.5msec High speed detection, 1.5mT High sensitivity CMOS MR Magnetic Sensor Switch (IMPORTANT: Please check the last page for Genuine Product Labeling) Rev. E13-1 Website:
HMX3033H Series. AnaSem. Low current consumption, 3.0mT High sensitivity CMOS Hall Magnetic Sensor Switch. Analog Semiconductor IC.
安纳森 Analog Semiconductor IC Low current consumption, 3.0mT High sensitivity CMOS Hall Magnetic Sensor Switch (IMPORTANT: Please check the last page for Genuine Product Labeling) Rev. E13-01 Website: www.anasemi.com
HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR
Rev.3.2_ HIGH RIPPLE-REJECTION LOW DROPOUT LOW INPUT-AND-OUTPUT CAPACITANCE CMOS VOLTAGE REGULATOR S-12 Series The S-12 Series is a positive voltage regulator with a low dropout voltage, high output voltage
APPLICATIONS Mobile phones Cordless phones Cameras, video recorders Portable games Portable AV equipment Reference voltage Battery powered equipment
CMOS Low Power Consumption Dropout Voltage : 60mV @ 30mA 200mV @ 100mA Maximum Output Current : 150mA (300mA=XC6204 E to H Type) Highly Accurate : ±2% Output Voltage Range : 1.8V ~ 6.0V (XC6204) 0.9V ~
XC6201 Series GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL PERFORMANCE CHARACTERISTICS TYPICAL APPLICATION CIRCUIT. Positive Voltage Regulators
ETR0301_004 Positive Voltage Regulators GENERAL DESCRIPTION The XC6201 series are highly precise, low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies.
Dual, High-PSRR, Low-Noise, Low-Dropout, 300mA CMOS Linear Regulator. Features. PSRR (db)
Dual, High-PSRR, Low-Noise, Low-Dropout, 300mA CMOS Linear Regulator General Description The series is a family of dual-channel CMOS linear regulators featuring ultra-high power supply rejection ratio
XC6210 Series APPLICATIONS. TYPICAL PERFORMANCE CHARACTERISTICS Dropout Voltage vs. Output Current TYPICAL APPLICATION CIRCUIT
ETR0317_004 High Current, High Speed LDO Regulators GENERAL DESCRIPTION The XC6210 series are precise, low noise, high current, positive voltage low dropout regulators. They are fabricated using Torex
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2.3_ HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR S-1131 Series The S-1131 Series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy,
High Ripple-Rejection Low Dropout CMOS Voltage Regulator
High Ripple-Rejection Low Dropout CMOS Voltage Regulator General Description The Series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy, and low current consumption
SOT-23-5, 5-Pin SON(A) *1. Attention should be paid to the power dissipation of the package when the output current is large.
Rev.2.2_ HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR The is a positive voltage regulator with a low dropout voltage, high output voltage accuracy, and low current consumption developed based
300mA Low Dropout Programmable output CMOS Voltage Regulators. Designator Symbol Description Designator Symbol Description CE Pin Logic :
300mA Low Dropout Programmable output CMOS Voltage Regulators General Description The series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series
High Speed Low Dropout Middle Current Voltage Regulators. Designator Symbol Description Designator Symbol Description CE Pin Logic :
High Speed Low Dropout Middle Current Voltage Regulators General Description The series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves
High Speed LDO Regulators Low ESR Cap.Compatible,Output ON/OFFControl
ETR0306_005 High Speed LDO Regulators Low ESR Cap.Compatible,Output ON/OFFControl GENERAL DESCRIPTION The XC6209/XC6212 series are highly precise, low noise, positive voltage LDO regulators manufactured
S-L2980 Series HIGH RIPPLE-REJECTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR. Features. Applications. Package
www.ablicinc.com HIGH RIPPLE-REJECTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR ABLIC Inc., 21-212 Rev.5.1_2 The is a positive voltage regulator with a low dropout voltage, high output voltage accuracy,
Ultra High-PSRR, Low-Noise, 300mA CMOS Linear Regulator. Applications. g g g g g g. Features
Ultra High-PSRR, Low-Noise, 300mA CMOS Linear Regulator General Description Applications The features ultra-high power supply rejection ratio, low output voltage noise, low dropout voltage, low quiescent
PIN CONFIGURATION *The dissipation pad for the USP-6B package should be solder-plated in recommended mount pattern and metal masking so as to enhance
ETR0305_004a GENERAL DESCRIPTION The XC6206 series are highly precise, low power consumption, 3 terminal, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series
XC6206 Series GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL PERFORMANCE CHARACTERISTICS TYPICAL APPLICATION CIRCUIT 1/17
ETR0305_004a GENERAL DESCRIPTION The XC6206 series are highly precise, low power consumption, 3 terminal, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series
Fast Ultra High-PSRR, Low-Noise, 300mA CMOS Linear Regulator
Fast Ultra High-PSRR, Low-Noise, 300mA CMOS Linear Regulator General Description The features ultra-high power supply rejection ratio, low output voltage noise, low dropout voltage, low quiescent current
GPS,DSC,MP4,PDA,DVD Camera Notebook Data communication GND COUT. SOT23-5L ACP1217A ACP1217B Name Descriptions. 1 3 VIN Input voltage.
GENERAL DESCRIPTION The series are positive voltage regulator fabricated by CMOS process. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for setting output voltage,
APPLICATIONS. FEATURES Maximum Output Current : 200mA (300mA Limit, TYP.)
Low Power Consumption:.8µA (TYP.) Range :.V ~.V Range :.9V ~.V Maximum Output Current: ma (ma Limit, TYP.) @ VOUT=.V, VIN=.V Current Limiter Circuit Built-In Ceramic Capacitor Compatible Small Packages
XC6202 Series GENERAL DESCRIPTION APPLICATIONS. FEATURES Maximum Output Current : 150mA (within Pd) Maximum Operational Voltage : 20V
XC6 Series High Voltage Positive Voltage Regulators ETR3_7 GENERAL DESCRIPTION The XC6 series are highly precise, low power consumption, high voltage input, positive voltage regulators manufactured using
Dual LDO Regulator (ch1: 300mA, ch2: 100mA) with ON/OFF Switch
XC6419 Series ETR338-5 Dual LDO Regulator (ch1: 3mA, ch2: 1mA) with ON/OFF Switch GENERAL DESCRIPTION The XC6419 series is a dual CMOS LDO regulator. The series features high accuracy, low output noise,
High-PSRR, Low-Noise, Low-Dropout, 300mA CMOS Linear Regulator. Features. Typical Application Diagram Typical Performance Characteristics.
High-PSRR, Low-Noise, Low-Dropout, 300mA CMOS Linear Regulator General Description The series is a family of dual-channel CMOS linear regulators featuring ultra-high power supply rejection ratio (PSRR),
XC6210 Series APPLICATIONS. TYPICAL PERFORMANCE CHARACTERISTICS Dropout Voltage vs. Output Current TYPICAL APPLICATION CIRCUIT
ETR317_6 High Current, High Speed LDO Regulators GENERAL DESCRIPTION The XC621 series are precise, low noise, high current, positive voltage low dropout regulators. They are fabricated using Torex s CMOS
150 ma output is possible (at V IN V OUT(S) V) *1 (Per circuit)
S-1711 Series www.sii-ic.com SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR Seiko Instruments Inc., 24-21 Rev.3._ The S-1711 Series is a 2-channel positive voltage
1.5 V to 5.5 V, selectable in 0.1 V step Output voltage accuracy: ±1.0% Dropout voltage:
www.sii-ic.com HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR Seiko Instruments Inc., 22-215 Rev.5.1_ The is a positive voltage regulator with a low dropout voltage, high-accuracy output voltage,
RP103x SERIES. LOW NOISE 150mA LDO REGULATOR OUTLINE FEATURES APPLICATIONS NO.EA
RPx SERIES LOW NOISE 5mA LDO REGULATOR OUTLINE NO.EA-9- The RPx Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance, and high
High Speed LDO Regulators Low ESR Cap.Compatible,Output ON/OFFControl
ETR0306_006 High Speed LDO Regulators Low ESR Cap.Compatible,Output ON/OFFControl GENERAL DESCRIPTION The XC6209/XC6212 series are highly precise, low noise, positive voltage LDO regulators manufactured
1.5 V to 5.5 V, selectable in 0.1 V step Output voltage accuracy:
www.ablicinc.com HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR ABLIC Inc., 23-215 Rev.3.1_2 The is a positive voltage regulator with a low dropout voltage, high-accuracy output voltage, and
Fast Ultra High-PSRR, Low-Noise, 300mA CMOS Linear Regulator. Features
Fast Ultra High-PSRR, Low-Noise, 300mA CMOS Linear Regulator General Description The features ultra-high power supply rejection ratio, low output voltage noise, low dropout voltage, low quiescent current
GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL PERFORMANCE CHARACTERISTICS TYPICAL APPLICATION CIRCUIT 1/17
ETR0305_002 GENERAL DESCRIPTION The XC6206 series are highly precise, low power consumption, high voltage, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series
FEATURES Maximum Output Current APPLICATIONS. TYPICAL PERFORMANCE CHARACTERISTICS Supply Current vs. Input Voltage TYPICAL APPLICATION CIRCUIT 1/22
ETR0329-005 GENERAL DESCRIPTION XC6218 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves very low supply current, 1.0A (TYP.)
PT7M mA, High PSRR, LDO Regulator Description. Features. Applications. Pin Assignment. Pin Description Pin No I/O Pin Name Description 1 I VIN
Features Input Voltage Range:.7V to 5.5V 3mA Guaranteed Output Current Stable with.47f Ceramic Output Capacitors Low Dropout Voltage 5mV@5mA (Vout=2.8V) Low Quiescent Current 36A High PSRR 75dB@kHz Auto
GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL PERFORMANCE CHARACTERISTICS TYPICAL APPLICATION CIRCUIT 1/17. Battery powered equipment
ETR0305_003a GENERAL DESCRIPTION The XC6206 series are highly precise, low power consumption, high voltage, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series
ACP1216. Low Dropout Positive Voltage Regulator GENERAL DESCRIPTION FEATURES APPLICATION CIRCUIT APPLICATION PIN CONFIGURATION ACP1216
GENERAL DESCRIPTION The series are positive voltage regulator ICs fabricated by CMOS process. Each of these ICs consists of a voltage reference, an error amplifier, a resistor network for setting output
200mA Low Power Consumption CMOS LDO Regulator CLZ6821/22
General Description The CLZ6821 is a positive LDO regulator designed on patent pending CMOS circuit technologies. The device attains high ripple rejection ratio and superior line and load transient response
LOW DROPOUT CMOS VOLTAGE REGULATOR S-818 Series
Rev.1.2 LOW DROPOUT CMOS VOLTAGE REGULATOR The is a positive voltage regulator developed utilizing CMOS technology featured by low dropout voltage, high output voltage accuracy and low current consumption.
Low Quiescent Current_Low Dropout CMOS Voltage Regulator
Low Quiescent _Low Dropout CMOS Voltage Regulator HM53XX Series 500mA Ferture: high output accuracy ±2% low dropout 1.5mV Iout=1mA low quiescent current Max input Output current Applications ⒈2uA 10V 500mA
XC62H Series GENERAL DESCRIPTION APPLICATIONS FEATURES TYPICAL PERFORMANCE CHARACTERISTICS TYPICAL APPLICATION CIRCUIT
ETR0312_006 Positive Voltage Regulator with (Output ON/OFF) GENERAL DESCRIPTION The XC62H series are highly precise, low power consumption, positive voltage regulators, manufactured using CMOS and laser
0.6% ACCURACY LOW NOISE 200mA LDO REGULATOR
RPx SERIES.% ACCURACY LOW NOISE ma LDO REGULATOR OUTLINE NO.EA-- The RPx Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low supply current, low ON-resistance,
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.3._1 HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR S-1131 Series The S-1131 Series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy,
PT7M8205 LDO Regulator
Features Output Current: 300mA or more Dropout Voltage: 270mV @ 300mA for 3.3V Operating Voltage Range: 1.8 to 5.5V Output Voltage Range: 1.2 to 3.3V (100mV Step) Low Power Consumption: 65µA High Ripple
Limited. R5324x SERIES. Limited TRIPLE LDO OUTLINE FEATURES APPLICATIONS NO. EA
TRIPLE LDO R5324x SERIES NO. EA-99-1244 OUTLINE The R5324x Series are CMOS-based multi positive voltage regulator ICs with high output voltage accuracy, low supply current, low noise, low dropout and high
28 V Input High Speed Voltage Regulator
28 V Input High Speed Voltage Regulator FEATURES Operating Voltage Range 2.0 V 28.0 V Output Voltage Range from 1.8 V to 18.0 V with 0.1 V increments Output Voltage Accuracy ± 2% Temperature Stability
1.5 V to 5.5 V, selectable in 0.1 V steps. High-accuracy output voltage: ±1.0%
Rev.5._ HIGH RIPPLE-REJECTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR The is a positive voltage regulator with a low dropout voltage, high output voltage accuracy, and low current consumption developed
1.5 V to 5.5 V, selectable in 0.1 V step
S-1167 Series www.ablicinc.com ULTRA LOW CURRENT CONSUMPTION, HIGH RIPPLE REJECTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR ABLIC Inc., 24-215 Rev.3.2_2 The S-1167 Series is a positive voltage regulator
1.5 V to 5.5 V, selectable in 0.1 V step Output voltage accuracy: 140 mv typ. (3.0 V output product, I OUT = 200 ma)
S-1165 Series www.ablicinc.com HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR ABLIC Inc., -15 Rev.4.1_ The S-1165 Series is a positive voltage regulator with a low dropout voltage, high-accuracy
id9309 Ultra-Low Noise Ultra-Fast 300mA LDO Regulator Features
Ultra-Low Noise Ultra-Fast 300mA LDO Regulator General Description The id9309 is a 300mA, low dropout and low noise linear regulator with high ripple rejection ratio and fast turn-on time. It has fixed
ESMT Preliminary EMP8731
High-PSRR, Low-Noise, 300mA CMOS Linear Regulator with 3 Types of Output Select General Description The EMP8731 features ultra-high power supply rejection ratio, low output voltage noise, low dropout voltage,
Low Noise 300mA LDO Regulator General Description. Features
Low Noise 300mA LDO Regulator General Description The id9301 is a 300mA with fixed output voltage options ranging from 1.5V, low dropout and low noise linear regulator with high ripple rejection ratio
1.5 V to 5.5 V, selectable in 0.1 V step Output voltage accuracy:
S-117 Series www.ablicinc.com HIGH RIPPLE-REJECTION AND LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR ABLIC Inc., 23-215 Rev.4.1_2 The S-117 Series is a positive voltage regulator with a low dropout
PT7M8206 LDO Regulator
Features Output Current: 300mA or more Dropout Voltage: 270mV @ 300mA for 3.3V Operating Voltage Range: 1.8 to 5.5V Output Voltage Range: 1.2 to 3.3V (100mV Step) Low Power Consumption: 65µA Standby Current:
PT7M8205 LDO Regulator
PT7M8205 Features Output Current: 300mA or more Dropout Voltage: 270mV @ 300mA for 3.3V Operating Voltage Range: 1.8 to 5.5V Output Voltage Range: 1.2 to 3.3V (100mV Step) Low Power Consumption: 65A High
A6318. AiT Semiconductor Inc. APPLICATION ORDERING INFORMATION
DESCRIPTION The is designed for portable RF and wireless applications with demanding performance and space requirements. The performance is optimized for battery-powered systems to deliver ultra low noise
I/O Name Descriptions
Features Output Current: 300mA or more Dropout Voltage: 270mV @ 300mA for 3.3V Operating Voltage Range: 1.8V to 5.5V Output Voltage Range: 1.2V to 3.3V (100mV Step) Low Power Consumption: 65 A Standby
60 db typ. (1.25 V output product, f = 1.0 khz) Built-in overcurrent protection circuit: Limits overcurrent of output transistor.
www.ablicinc.com S-11L1 Series 3.65 V INPUT, 15 ma, LOW OUTPUT VOLTAGE (.8 V) VOLTAGE REGULATOR ABLIC Inc., 29-217 Rev.2.3_1 The S-11L1 Series, developed by using the CMOS technology, is a positive voltage
Ultra-Low Noise Ultra-Fast 300mA LDO Regulator. Features
Ultra-Low Noise Ultra-Fast 300mA LDO Regulator General Description The is a 300mA, low dropout and low noise linear regulator with high ripple rejection ratio and fast turn-on time. It offers 1% initial
S-1132 Series HIGH RIPPLE-REJECTION AND LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR. Features. Applications. Packages.
S-1132 Series www.ablicinc.com HIGH RIPPLE-REJECTION AND LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR ABLIC Inc., 24-215 Rev.4.2_2 The S-1132 Series is a positive voltage regulator with a low
28 V, 150 ma Voltage Regulator with Stand-by Mode
28 V, 150 ma Voltage Regulator with Stand-by Mode FEATURES Operating Voltage Range 2.0 V 28.0 V Output Voltage Range from 2.0 V to 12.0 V with 0.1 V increments (B series) or 2.0 V 23 V with external resistors
RT9187B. 600mA, Ultra-Low Dropout, Ultra-Fast CMOS LDO Regulator. General Description. Features. Applications. Ordering Information RT9187B
6mA, Ultra-Low Dropout, Ultra-Fast CMOS LDO Regulator General Description The is a high-performance, 6mA LDO regulator, offering extremely high PSRR and ultra-low dropout. This chip is ideal for portable
High Input Voltage, Low Quiescent Current, Low-Dropout Linear Regulator. Applications
High Input Voltage, Low Quiescent Current, Low-Dropout Linear Regulator General Description The is a high voltage, low quiescent current, low dropout regulator with 150mA output driving capacity. The,
200mA Regulator IC Monolithic IC MM3404 Series
2mA Regulator IC Monolithic IC MM344 Series 2mA Regulator IC MM344 Series Outline This IC is a high speed response 2mA regulator IC with low quiescent current and high ripple rejection. No load input current
R1182x SERIES. Low Voltage 150mA LDO REGULATOR OUTLINE FEATURES APPLICATIONS NO.EA
R8x SERIES Low Voltage 5mA LDO REGULATOR NO.EA--7 OUTLINE The R8x Series are CMOS-based positive voltage regulator ICs with high output voltage accuracy and low supply current. Each of these ICs consists
CMOS Regulator Monolithic IC MM303X Series
CMOS Regulator Monolithic IC MM33X Series CMOS Regulator MM33X Series Outline This IC is a voltage regulator IC developed using the CMOS process. Super low consumption current of µa typ. (MM33X) (when
TX6221 Series High PSRR LDO
Features Low power consumption:8ua (Typ.) Low voltage drop:0.4v@100ma(typ.) Standby Mode: 0.1uA Low temperature coefficient Output Voltage Range: 0.9V~5V Good line Regulation:0.05%/V High Ripple Rejection:
XC6504 Series. APPLICATIONS Mobile devices / terminals Wireless LAN Modules (wireless, cameras, etc.) TYPICAL PERFORMANCE CHARACTERISTICS
XC654 Series ETR47-7.6μA Ultra Low Power Consumption Small Voltage Regulator (CL Capacitor-Less) GENERAL DESCRIPTION The XC654 series is a highly accurate CMOS voltage regulator that achieves very low
Low Power/Fast MODE alternative 200mA LDO REGULATOR
RPx SERIES Low Power/Fast MODE alternative ma LDO REGULATOR OUTLINE NO.EA-79- The RPx Series consist of CMOS-based voltage regulator ICs with high output voltage accuracy, low dropout voltage and low supply
TX mA Low Power LDO
Features Low power consumption Low Quiescent Current: 5.5uA at 6V Low voltage drop Output voltage accuracy: tolerance ±2% Low temperature coefficient Applications Battery-powered equipment Portable AV
200mA LDO Monolithic IC MM1836 Series
2mA LDO Monolithic IC MM1836 Series Outline This IC is a 2mA Low dropout regulator IC with ON/OFF control. The IC applies to a standard home equipments, for a maximum operating voltage is 14V. Package
VIN VOUT GND SHDN V SHDN AIC1730. Low Noise Low Dropout Linear Regulator
150mA, Low Noise, Low Dropout Linear Regulator FEATURES Available in ±2% Output Tolerance. 1.8V to 3.3V Output Voltage with 0.1V Increment. Active Low Shutdown Control. Very Low Quiescent Current. Very
S-1711 Series SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR. Features. Applications.
S-1711 Series www.ablic.com www.ablicinc.com SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW DROPOUT CMOS VOLTAGE REGULATOR ABLIC Inc., 24-215 Rev.3.1_2 The S-1711 Series is a 2-channel positive
R1190x SERIES. 1A REGULATOR (Operating Voltage up to 16V) OUTLINE FEATURES APPLICATIONS. Rev Built-in functions. Others. No.
R9x SERIES A REGULATOR (Operating Voltage up to V) No.EA-83-92 OUTLINE The R9x series are a low supply current voltage regulator with high output voltage accuracy. The maximum operating voltage is V. Each
A6303A CMOS LOW DROPOUT REGULATOR (LDO) 300mA ULTRA-LOW NOISE, ULTRA-FAST RESPONSE
DESCRIPTION The is designed for portable RF and wireless applications with demanding performance and space requirements. The performance is optimized for battery powered systems to deliver ultra low noise
RP114x SERIES. 300mA LDO REGULATOR OUTLINE FEATURES APPLICATIONS NO. EA
SERIES 3mA LDO REGULATOR NO. EA-36-63 OUTLINE The RPx Series are CMOS-based voltage regulator ICs with high output voltage accuracy, low supply current, low dropout, and high ripple rejection. Each of
XB1086 Series GENERAL DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION CIRCUITS TYPICAL PERFORMANCE CHARACTERISTICS
XB086 Series ETR0325-008.5A Positive Voltage Regulator GENERAL DESCRIPTION The XB086 is a series of low dropout positive voltage regulators with a high output current capability of.5a. Stable output can
HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.2._ HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR S-117 Series The S-117 Series is a positive voltage regulator with a low dropout voltage, high output voltage accuracy,
300mA/150mA High Speed LDO Regulators with ON-OFF Control
ETR03004-010 300mA/150mA High Speed LDO Regulators with ON-OFF Control GENERAL DESCRIPTION The XC6204/XC6205 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS
70 db typ. (1.0 V output product, f = 1.0 khz) Built-in overcurrent protection circuit: Limits overcurrent of output transistor.
S-1155 Series www.ablicinc.com HIGH RIPPLE-REJECTION LOW DROPOUT HIGH OUTPUT CURRENT CMOS VOLTAGE REGULATOR ABLIC Inc., 7-15 Rev..1_3 The S-1155 Series, developed by using CMOS technology, is a positive
Fast Ultra High-PSRR, Low-Noise, Low-Dropout, 600mA Micropower CMOS Linear Regulator. Features
Fast Ultra High-PSRR, Low-Noise, Low-Dropout, 600mA Micropower CMOS Linear Regulator General Description The low-dropout (LDO) CMOS linear regulators, feature ultra-high power supply rejection ratio (75dB
S-1721 Series SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR. Features.
S-1721 Series www.ablicinc.com SUPER-SMALL PACKAGE 2-CIRCUIT HIGH RIPPLE-REJECTION LOW CURRENT CONSUMPTION LOW DROPOUT CMOS VOLTAGE REGULATOR ABLIC Inc., 27-215 Rev.2.1_2 The S-1721 Series, developed using
ELM86xxxxBxA CMOS Dual 400mA LDO Regulator
ELM86xxxxBxA CMOS Dual ma LDO Regulator General description ELM86xxxxBxA is dual CMOS Voltage Regulator which consists of large current LDOs. With the chip enable function of each channel, it is possible
SPX mA Low-Noise LDO Voltage Regulator GENERAL DESCRIPTION APPLICATIONS FEATURES TYPICAL APPLICATION DIAGRAM
July 2018 Rev. 2.0.4 GENERAL DESCRIPTION The is a positive voltage regulator with a low dropout voltage and low noise output. In addition, this device offers a very low ground current of 800μA at 100mA
A1117A 15V, 1A BIPOLAR LINEAR REGULATOR CURRENT LIMIT AND THERMAL PROTECTION
DESCRIPTION is a series of low dropout three-terminal regulators with a dropout of 1.3V at 1A load current. features a very low standby current 2mA compared to 5mA of competitor. Other than a fixed version,
Built-in Inrush Current Protection, 300mA High Speed LDO Voltage Regulator
XC6223 Series ETR339-5 Built-in Inrush Current Protection, 3mA High Speed LDO Voltage Regulator GENERAL DESCRIPTION The XC6223 series is a high speed LDO regulator that features high accurate, low noise,
R1501x SERIES. 1A LDO REGULATOR (Operating Voltage up to 24V) OUTLINE FEATURES APPLICATIONS NO.EA
R5x SERIES A LDO REGULATOR (Operating Voltage up to 24V) NO.EA-84-89 OUTLINE The R5x series are CMOS-based positive voltage regulator (VR) ICs. The R5xxxxB has features of high input voltage operating,
LOW NOISE 150mA L.D.O REGULATOR
LOW NOISE ma L.D.O REGULATOR RN SERIES APPLICATION MANUAL ELECTRONIC DEVICES DIVISION NO. EA-46-983 NOTICE. The products and the product specifications described in this application manual are subject
A1117A BIPOLAR LDO REGULATOR 1A CURRENT LIMIT AND THERMAL PROTECTION
DESCRIPTION is a series of low dropout three-terminal regulators with a typical dropout of 1.3V at 1A load current. Besides fixed voltage version (VOUT = 1.2V, 1.5, 1.8V, 2.5V, 3.3V, 5V), has an adjustable
RT9187C. 600mA, Ultra-Low Dropout, CMOS Regulator. General Description. Features. Applications. Ordering Information. Pin Configurations (TOP VIEW)
600mA, Ultra-Low Dropout, CMOS Regulator General Description The is a high-performance, 600mA LDO regulator, offering extremely high PSRR and ultra-low dropout. This chip is ideal for portable RF and wireless
*1. Attention should be paid to the power dissipation of the package when the output current is large.
Rev.1.5_ LOW DROPOUT CMOS VOLTAGE REGULATOR Features The is a low dropout voltage, high output voltage accuracy and low current consumption positive voltage regulator developed utilizing CMOS technology.