AF8403. Filterless 3W Class-D Stereo Audio Amplifier 1 / 5. Features. Applications. General Description AF-V3.0. Analog Future. Package Information
|
|
- Leon Hart
- 5 years ago
- Views:
Transcription
1 Filterless 3 Class-D Stereo Audio Amplifier Features 3 Output at 10% THD with a 4 Load and 5V Power Supply Filterless, Low Quiescent Current and Low EMI Low THD+N Superior Low Noise Efficiency up to 90% Short Circuit Protection Thermal Shutdown Few External Components to Save the Space and Cost Pb-Free Package General Description The AF8403 is a 3, class-d audio amplifier. It offers low THD+N, allowing it to achieve high quality sound reproduction. The new filterless architecture allows the device to drive the speaker, requiring no low-pass output filters, thus to save the and PCB area. ith the same numbers of external components, the efficiency of the AF8403 is much better than that of class-ab cousins. The AF8403 is available in a SOP-16 package. Applications LCD Monitors / TV Projectors Notebook Computers Portable Speakers Portable DVD Players, Game Machines Cellular Phones/Speaker Phones Package Information 1 / 5
2 PIN CONFIGURATION PIN ASSIGNMENT Pin Number Pin Name Description 1 +OUT_L Left Channel Positive Output 2 PGND Power GND 3 -OUT_L Left Channel Negative Output 4 PVDD Power VDD MUTE Mute Control Input(active low) 6 VDD Analog VDD 7 INL Left Channel Input 8 VREF Internal analog reference, connect a bypass capacitor from VREF to GND 9 NC No connect 10 INR Right Channel Input 11 GND Analog GND SHDN Shutdown Control Input(active low) 13 PVDD Power VDD 14 +OUT_R Right Channel Negative Output 15 PGND Power GND 16 -OUT_R Right Channel Positive Output Functional Block Diagram 2 / 5
3 Typical Application Absolute Maximum A = 25 C unless otherwise noted Supply Voltage...6.0V Operation Junction Temperature to 125 Operation Temperature Range to 85 Storage Temperature to 150 Maximum Junction Temperature Soldering Temperature ,5sec Electrical Characteristics (V =5V Gain=24dB, R =8Ω, T =25, unless otherwise noted.) Symbol Parameter Test Conditions MIN TYP MAX UNIT VIN Supply Power VDD=5.0V 2.84 THD+N=10%,, RL=4 Ω THD+N=1%,, RL=4 Ω VDD=3.6V 1.46 VDD=3.0V 1.02 VDD=5.0V 2.24 VDD=3.6V 1.13 Po Output Power VDD=3.0V 0.74 VDD=5.0V 1.69 THD+N=10%,, RL=8 Ω THD+N=1%,, RL=8 Ω VDD=3.6V 0.87 VDD=3.0V 0.56 VDD=5.0V 1.33 VDD=3.6V 0.68 VDD=3.0V 0.44 THD+N Total Harmonic Distortion Plus Noise VDD=5.0V,Po=0.5,RL=8 Ω 0.16 VDD=3.6V,Po=0.5,RL=8 Ω 0.18 VDD=5.0V,Po=1,RL=4 Ω 0.19 VDD=3.6V,Po=1,RL=4 Ω 0.30 % % Gv Gain 20 db PSRR Power Supply Ripple VDD=5.0V, Inputs ac-grounded with f=100hz -59 db 3 / 5
4 Rejection CIN=0.47μF -58 Cs Crosstalk VDD=5V,Po=0.5,RL=Ω,Gv=20dB F=1kHz -95 db SNR Signal-to-noise ratio VDD=5V, Vorms=1V,Gv=20dB 73 db Vn Output noise VDD=5V, Inputs ac-grounded with A-weighting 166 CIN=0.47μF No A-weighting 225 μv Dyn Dynamic range VDD=5.0V, THD=1% 83 db η Efficiency RL=8Ω, THD=10% 84.5 % RL=4Ω, THD=10% 75 VDD=5.0V 17 IQ Quiescent Current VDD=3.6V No load 8 ma VDD=3.0V 6 IMUTE Muting Current VDD=5.0V VMUTE=0.3V 3.5 ma ISD Shutdown Current VDD=2.5V to 5.5V Vsd=0.3V <1 μa Rdson Static Drain-to-source On-state Resistor IDS=500mA,Vgs=5V PMOS 180 NMOS 180 mω fsw Switching Frequency VDD=3V to 5V 287 khz Vos Output Offset Voltage Vin=0V, VDD=5V 10 mv VIH Enable Input High Voltage VDD=5.0V VIL Enable Input Low Voltage VDD=5.0V VIH MUTE Input High Voltage VDD=5.0V VIL MUTE Input Low Voltage VDD=5.0V V V OTP OTH Over Temperature Protection Over Temperature Hysterisis No Load, Junction Temperature VDD=5V Typical Performance Characteristics 1 THD+N vs Output Power 2 THD+N vs Output Power RL=4Ω,Gain=20dB, RL=8Ω,Gain=20dB, 4 / 5
5 3 THD+N vs Frequency 4 THD+N vs Frequency Vdd=5V,RL=4Ω,Gain=20dB,Cin=0.47uF 5 Frequency response Vdd=5V,RL=8Ω,Gain=20dB,Cin=0.47uF Vdd=5V,RL=8Ω,Gain=20dB,Cin=0.47uF DISCLAIMER ANALOG FUTURE COMPANY RESERVES THE RIGHT TO MAKE CHANGES ITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. ANALOG FUTURE DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICIENCE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THE GRAPHS PROVIDED IN THIS DOCUMENT ARE A STATISTICAL SUMMARY BASED ON A LIMITED NUMBER OF SAMPLES AND ARE PROVIDE FOR INFORMATIONAL PURPOSE ONLY. THE PERFORMANCE CHARACTERISTICS LISTED IN THEM ARE NOT TESTED OR GUARANTEED. IN SOME GRAPHS, THE DATA PRESENTED MAY BE OUTSIDE THE SPECIFIED OPERATING RANGE (E.G,. OUTSIDE SPECIFIED POER SUPPLY RANGE ) AND THEREFORE OUTSIDE THE ARRANTED RANGE. 5 / 5
EUA W/CH Stereo Filter-less Class-D Audio Power Amplifier with Auto-Recovery
3-W/CH Stereo Filter-less Class-D Audio Power Amplifier with Auto-Recovery DESCRIPTION The is a high efficiency, 3W/channel stereo class-d audio power amplifier. A low noise, filterless PWM architecture
More informationFilterless 3W Class-D Stereo Audio Amplifier
Attenuation Decoder Interface C ontrol General Description The is a class-d audio amplifier. It can provide 3W output power and low THD+N, allow- ing it to achieve high-quality sound reproduction. The
More informationPAM8403. Filterless 3W Class-D Stereo Audio Amplifier. Key Features. General Description. Applications. Typical Application
Key Features 3W Output at THD with a 4Ω oad and Power Supply Filterless, ow Quiescent Current and ow EMI ow THD+N Superior ow Noise Efficiency up to 90 Short Circuit Protection Thermal Shutdown Few External
More informationPAM8603M. Pin Assignments. Description. Features. Applications. A Product Line of. Diodes Incorporated
3W FILTERLESS STEREO CLASS-D AUDIO AMPLIFIER WITH DC VOLUME CONTROL Description Pin Assignments The is a 3W, sterero, Class-D audio amplifier with DC volume control. It offers low THD+N, allowing it to
More informationMIX3001 2X3W FM Non-Interference Class-D Amplifier. Features. Description. Applications
Description The MIX3001 is a high efficiency, 3/channel stereo class-d audio power amplifier. A Low noise, filterless architecture eliminates the out filter, it required few external components for operation
More informationPAM8304. Pin Assignments. Description NEW PRODUCT. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
3 MONO CLASS D AUDIO AMPLIFIER Description Pin Assignments The is a mono filter-less Class-D amplifier with high SNR and differential input that helps eliminate noise. The supports 2.8V to 6V operation
More informationAF Watt CLASS-AB Audio Power Amplifier 1 / 11. Features. General Description. Applications AF-V3.0. Analog Future. Package Information
1 Watt CLASS-AB Audio Power Amplifier Features PSRR at 217Hz, VDD = 5V (Fig. 1) 62dB(typ.) Power Output at 5.0V & 1% THD 1W(typ.) Power Output at 3.3V & 1% THD 400mW(typ.) Shutdown Current 0.1μA(typ.)
More informationPAM8406. Pin Assignments. Description. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
ALTERNATIVE 5W STEREO AUDIO AMPLIFIER Description The is a 5W audio amplifier with an alternative option between Class-D and Class-AB output which makes very ideally for the applications efficiency-emi
More informationApplications. Part Number Part Marking Package Type Standard Package PAM8003DR PAM8003 XATYWWLL
FILTERLESS 2.5W CLASS-D STEREO AUDIO AMPLIFIER Description Pin Assignments The is a 2.5W, Class-D audio amplifier. It offers low THD+N, allowing it to achieve high-quality sound reproduction. The new filterless
More informationPAM8402. General Description. Key Features. Applications. Typical Application Vdd. 2 W Class-D Stereo Audio Amplifier with Enable
Key Features 2W@0 THD per Channel Output into a 4Ω oad at V Support Speakers or Earphones(4Ω to 32 Ω) ow THD+N Superior ow Noise without Input Efficiency up to 8 Short Circuit Protection Space Saving Package:
More informationA2327. AiT Semiconductor Inc. ORDERING INFORMATION APPLICATION
DESCRIPTION The is a 2.6W high efficiency filter-free class-d audio power amplifier that requires only three external components. Features like 88% efficiency, 75dB PSRR, and improved RF-rectification
More informationPAM8302A. Pin Assignments. Description. Features. Applications. A Product Line of. Diodes Incorporated 2.5W FILTERLESS CLASS-D MONO AUDIO AMPLIFIER
2.5W FILTERLESS CLASS-D MONO AUDIO AMPLIFIER Description Pin Assignments The is a 2.5W Class-D mono audio amplifier. Its low THD+N feature offers high quality sound reproduction. The new filterless architecture
More informationPAM8603A. Pin Assignments. Description. Features. Applications. A Product Line of. Diodes Incorporated
ANTI-SATURATION FILTERLESS 3W CLASS-D STEREO AMPLIFIER WITH DC VOLUME CONTROL AND HEADPHONE OUTPUT Description Pin Assignments The is a 3W, Class-D audio amplifier with headphone amplifier. Advanced 64-Step
More informationBA Features. General Description. Applications. Marking Information. 3W Mono Filterless Class D Audio Power Amplifier
3W Mono Filterless Class D Audio Power Amplifier General Description The BA16853 is a cost-effective mono Class D audio power amplifier that assembles in Dual Flat No-Lead Plastic Package (DFN-8). Only
More informationPAM8010. Pin Assignments. Description. Features. Applications. A Product Line of. Diodes Incorporated
3W STEREO CLASS-D with DC VOLUME, HEADPHONE and POWER LIMIT Description Pin Assignments The is a 3W, Class-D audio amplifier with headphone amplifier. Advanced 64-step DC volume control minimizes external
More informationPAM8908. Description. Pin Assignments. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
25mW TRUE CAP FREE STEREO HEADPHONE AMPLIFIER Description The stereo headphone driver is designed for portable equipment where board space is at a premium. The uses a unique, patent pending architecture
More information2.5W/CH Stereo Filter-less Class-D Audio Amplifier. Description. Product ID Package Comments Packing
2.5W/CH Stereo Filterless ClassD Audio Amplifier Features Supply voltage range: 2.8 V to 5.5 V Support singleended or differential analog input Low static operation current Low shutdown current Short poweron
More informationPAM8406. Alternative 5W Stereo Audio Amplifier. Key Features. General Description. Applications. Typical Application
Key Features Alternative Output: Class-D or Class-AB Output at THD with a oad and Power Supply at Class D mode 3 Output at THD with a 4 oad and Power Supply Filterless, ow Quiescent Current and No EMI
More informationA W STEREO CLASS-D AUDIO POWER AMPLIFIER WITH DC VOLUME CONTROL
DESCRIPTION The is a stereo Class-D audio amplifier with volume control. It delivers up to 2.5W for each channel (5W in all) into a 3Ω load or 2W for each channel (4W in all) into a 4Ω load or 1.25W for
More informationPAM8016. Description. Pin Assignments. Applications. Features. Typical Applications Circuit HAPTIC DRIVER FOR ERM AND LRA PAM8016
HAPTIC DRIVER FOR ERM AND LRA Description Pin Assignments The is a haptic driver designed with low-latency, highefficiency, and more drive strength capable of driving Linear Resonance Actuator (LRA) and
More informationFigure 1 Typical Application Circuit
STEREO HEADPHONE DRIVER January 206 GENERAL DESCRIPTION The IS3AP492 is stereo headphone drivers designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost.
More informationAP4890B --- 1W AUDIO POWER AMPLIFIER
AP4890B --- 1W AUDIO POWER AMPLIFIER 1. DESCRIPTION : The AP4890B is an audio power amplifier designed for portable communication device applications such as mobile phone applications. The AP4890B is capable
More informationA W CLASS AB BTL AUDIO POWER AMPLIFIER EXTERNAL GAIN CONFIGURATION CAPABILITY
DESCRIPTION The is a Class-AB audio power amplifier designed for mobile phones and other portable communication devices. It is capable of delivering 1.28 watts of continuous average power to an 8Ω BTL
More informationShenZhen Nsiway Technology Co., Ltd 2010,11. Nsiway 1
NS4148 Data Sheet V1.1 ShenZhen Nsiway Technology Co., Ltd 2010,11 Nsiway 1 Change History DATA VERSION AUTHOR CHAGE EXPLAIN Nsiway 2 CONTENTS CHANGE HISTORY... 2 GENERAL DESCRIPTION... 5 FEATURES... 5
More informationLY W Mono Filterless Class D Audio power Amplifier
FEATURES 3.3 W Into 4Ω from 5.5V power supply at THD+N = % (Typ.). 2. W Into 8Ω from 5.5V power supply at THD+N = % (Typ.). 2.5V~5.5V Power supply. Low shutdown current. Low quiescent current. Minimum
More informationMONAURAL 4.5W Non-Clip DIGITAL AUDIO POWER AMPLIFIER. ShenZhen Nsiway Technology Co., Ltd 2012,10. Nsiway 1
NS4158 Data Sheet V1.0 ShenZhen Nsiway Technology Co., Ltd 2012,10 Nsiway 1 General Description NS4158 is a class D can switch work mode, with the function of preventing distortion, low EMI, no filter,
More informationPAM8009. Pin Assignments. Description ADVANCED INFORMATION XXXYWWLL PAM8009. Features. Applications
3W STEREO CLASS-D Audio Amplifier and Class AB Headphone Driver (DC VOLUME, UVP and AGC Function) Description Pin Assignments The is a 3W, Class D audio-power amplifier for driving bridged-tied stereo
More informationPAM8403H EVB User Guide
-EV Board User Guide AE Department 1. Revision Information PAM8403H Date Revision Description Comment 2008/03/24 V1.0 Initial Release 2012/07/31 V1.1 Update PCB 2. PAM8403H General Description The PAM8403H
More informationPAM8001. Pin Assignments. Description. Features. Applications. A Product Line of. Diodes Incorporated
ANTI-SATURATION FILTERLESS 2W CLASS-D STEREO AMPLIFIER WITH DC VOLUME CONTROL AND MAX OUTPUT POWER SETTING Description Pin Assignments The is a 2W, class-d audio amplifier. Advanced 64-step DC volume control
More informationDATA SHEET. Filterless, 2.8W, Mono Class-D Audio Power Amplifier
GK2305LD Filterless, 2.8W, Mono Class-D Audio Power Amplifier General Description ---The GK2305LD is a 2.8W high efficiency, filterless Class-D audio amplifier in a DFN or MSOP package. A filterless PWM
More information3W/CH Stereo Filter-less Class-D Audio Amplifier with Headphone Driver. Description. Product ID Package Packing Comments
3W/CH Stereo Filter-less Class-D Audio Amplifier with Headphone Driver Features Supply voltage range: 3.0 V to 5.5 V 10mA static operation current
More information6.4W Anti-Clipping Mono Audio Power Amplifier
6.4W Anti-Clipping Mono Audio Power Amplifier FEATURE Anti-Clipping Function, ACF Both Class D and Class AB are available Excellent EMI Suppression Performance Filter-less Modulation, Eliminating Output
More informationUTC UNISONIC TECHNOLOGIES CO., LTD. 1 UTC TDA7496L LINEAR INTEGRATED CIRCUIT 2W+2W AMPLIFIER WITH DC VOLUME CONTROL
2W2W AMPLIFIER WITH DC CONTROL DESCRIPTION The UTC TDA796L is a stereo 2W2W class AB power amplifier, specially designed for high quality sound, TV and Monitor applications. Features of the UTC TDA796L
More informationSA7496L 2 CH AUDIO POWER AMPLIFIER(2W X 2) HANGZHOU SILAN MICROELECTRONICS CO.,LTD REV: Http: Page 1 of 10 DESCRIPTION
2 CH AUDIO POWER AMPLIFIER(2W X 2) DESCRIPTION The SA7496L is a monolithic two channels power amplifier, it is a stereo 2W+2W class AB output stage in the DIP20 and SOP20 package, specially designed for
More information3W Stereo Class-D Audio Power Amplifier BA Data Sheet. Biforst Technology Inc. Rev.1.1,
3W Stereo Class-D Audio Power Amplifier BA20550 Data Sheet Rev.1.1, 2007.02.12 Biforst Technology Inc. 3W Stereo Class-D Audio Power Amplifier BA20550 GENERAL DESCRIPTION The BA20550 is a 5V class-d amplifier
More informationSGM mW, Capless, Stereo Headphone Amplifier with Shutdown
8mW, Capless, Stereo Headphone GENERAL DESCRIPTION The SGM497 stereo headphone amplifier is designed for portable equipment where board space is at a premium. The SGM497 uses capless architecture to produce
More informationESMT Preliminary AD51652
3W Mono Filter-less Class-D Audio Amplifier Features Supply voltage range: 2.5 V to 5.5 V Support single-ended or differential analog input Low Quiescent Current Low Output Noise Low shut-down current
More information2.6 Watt Mono Filter-Free Class-D Audio Power Amplifier
Features 2.6 Watt Mono FilterFree ClassD Audio Power Amplifier Efficiency With an 8Ω Speaker: 88% at 400 mw 80% at 100 mw 3.8mA Quiescent Current 0.4μA Shutdown Current Optimized PWM Output Stage Eliminates
More informationUNISONIC TECHNOLOGIES CO., LTD TDA2050
UNISONIC TECHNOLOGIES CO., LTD TDA2050 32W HI-FI AUDIO POWER AMPLIFIER DESCRIPTION The UTC TDA2050 is a monolithic integrated circuit with high power capability and is designed to use as an class AB audio
More informationPAM8303D. Pin Assignments. Description. Applications. Features. A Product Line of. Diodes Incorporated
ULTRA LOW EMI, 3W FILTERLESS MONO CLASS-D AUDIO POWER AMPLIFIER Description Pin Assignments The is a 3W mono filterless Class-D amplifier with high PSRR and differential input that eliminate noise and
More informationPower Limited Stereo Filter-less Class-D Audio Amplifier with Headphone Driver. Description. Product ID Package Packing Comments
2.5W/CH@5V Power Limited Stereo Filter-less Class-D Audio Amplifier with Headphone Driver Features Supply voltage range: 3.0 V to 5.5 V 2.5W power limit function 10mA static operation current
More informationUNISONIC TECHNOLOGIES CO., LTD PA4838
UNISONIC TECHNOLOGIES CO., LTD PA4838 STEREO W AUDIO POWER AMPLIFIERS WITH DC VOLUME CONTROL AND LECTABLE GAIN DESCRIPTION The UTC PA4838 is a monolithic integrated circuit and designed to provide DC volume
More informationHT82V73A 1500mW Audio Power Amp with Shutdown
1500mW Audio Power Amp with Shutdown Features Operating voltage: 2.2V to 5.5V High signal-to-noise ratio Low distortion Large output voltage swing Low power consumption Output power 1500mW at 10% THD+N
More informationLow-Cost, Mono/Stereo, 1 W Differential Audio Power Amplifiers
Low-Cost, Mono/Stereo, 1 W Differential Audio Power Amplifiers General Description The is an audio power amplifier primarily designed for demanding applications in mobile phones and other portable communication
More informationFEATURES DESCRIPTION APPLICATIONS BLOCK DIAGRAM. PT Inputs, 2.6Wx2 Class-AB Audio Amplifier with I 2 C Volume
4 Inputs, 2.6Wx2 Class-AB Audio Amplifier with I 2 C Volume DESCRIPTION The PT2369 is an audio amplifier design for the low voltage (5V) application purpose, built-in stereo 2.6W Class-AB power amplifier
More informationSGM mW, Capless, Stereo Headphone Amplifier with Shutdown
GENERAL DESCRIPTION The SGM4914 stereo headphone amplifier is designed for portable equipment where board space is at a premium. The SGM4914 uses capless architecture to produce a ground-referenced output
More informationFilterless 3W Class- D Mono Audio Amplifier
Preliminary Datasheet LPA00 Filterless 3W Class- D Mono Audio Amplifier General Description The LPA00 is a 3W, class-d audio amplifier. It offers low THD+N, allowing it to achieve high-quality Power Supply
More informationShenZhen Nsiway Technology Co., Ltd 2013/08. Nsiway 1
NS4215 Data Sheet V1.0 ShenZhen Nsiway Technology Co., Ltd 2013/08 Nsiway 1 Change History DATA VERSION AUTHOR CHAGE EXPLAIN Nsiway 2 CONTENTS CHANGE HISTORY... 2 GENERAL DESCRIPTION... 5 FEATURES... 5
More informationSGM4809 Dual 158mW Headphone Amplifier with Active Low Shutdown Mode
Dual 58mW Headphone Amplifier GENERAL DESCRIPTION The SGM4809 is a dual audio power amplifier capable of delivering 58mW per channel of continuous average power with less than 0.% distortion(thd N)when
More information2W+2W AMPLIFIER WITH DC VOLUME CONTROL
TECHNICAL DATA 2W+2W AMPLIFIER WITH DC VOLUME CONTROL KL7496L DESCRIPTION The KL7496L is a stereo 2W+2W class AB power amplifier, specially designed for high quality sound, TV and Monitor applications.
More information参考資料 PAM8012. Pin Assignments. Description. Features. Applications. A Product Line of. Diodes Incorporated
MONO 2.0W ANTI-SATURATION CLASS-D AUDIO POWER AMPLIFIER with POWER LIMIT Description Pin Assignments The is a 2.0W mono filterless class-d amplifier with high PSRR and differential input that reduce noise.
More informationL272/L272A Dual Power Operational Amplifier
L272/L272A Dual Power Operational Amplifier www.fairchildsemi.com Features Output Current up to 0.7A Operates at Low Voltage (VS(MIN) = 4V) Low Saturation Voltage (Ip = 0.5A, VO = 1.5V) Thermal Shutdown
More information3W Low EMI Class-D Audio Power Amplifier with Auto-Recovering Short-circuit Protection
3W Low EMI Class-D Audio Power Amplifier with Auto-Recovering Short-circuit Protection GENERAL DESCRIPTION The HM2010 is a high efficiency, low EMI, filterless Class-D audio amplifier with auto-recovering
More informationL272. Dual Power Operational Amplifier. Description. Features. Applications. Internal Block Diagram VCC OUT1 OUT2 VEE/GND VEE/GND GND GND GND NC IN1-
Dual Power Operational Amplifier www.fairchildsemi.com Features Output Current upto 0.7A Operates at Low Voltage (VS(MIN)=4V) Low Saturation Voltage (Ip=0.5A, VO=1.5V) Thermal Shutdown (TSD=160 C) Ground
More informationAF A Bipolar Linear Regulator 1 / 9. Features Applications
1A Bipolar Linear Regulator Features Applications Maximum output current is 1A Range of operation input voltage: Max 15V Line regulation: 0.1%/V (typ.) Standby current: 2mA (typ.) Load regulation: 10mV
More informationEUA W Mono Filterless Class-D Audio Power Amplifier DESCRIPTION FEATURES APPLICATIONS. Typical Application Circuit
3-W Mono Filterless Class-D Audio Power Amplifier DESCRIPTION The EUA2011 is a high efficiency, 3W mono class-d audio power amplifier. A low noise, filterless PWM architecture eliminates the output filter,
More information2.7W Mono Filter-less Class-D Audio Amplifier. Applications. Description. PWM Generator
2.7W Mono Filter-less Class-D Audio Amplifier Features Supply voltage range: 2.5 V to 5.5 V Support single-ended or differential analog input Low static operation current Low shut-down current Short power-on
More informationDIO2115E 2-Vrms Audio Driver with Adjustable Gain
Rev.0 Features Voltage Output at 32Ω Load 20mW % THD+N with 3.3V supply voltage No Pop/Clicks Noise when Power ON/OFF No Need for Output DC-Blocking Capacitors Optimized Frequency Response between 20Hz
More information140mW Headphone Amplifier with Unity-gain Stable
140mW Headphone Amplifier with Unity-gain Stable General Description The LPA4809 is a dual audio power amplifier capable of delivering 140mW per channel of continuous average power into a 16Ω load with
More informationSN W Mono Filterless Class-D Audio Power Amplifier DESCRIPTION FEATURES APPLICATIONS. Typical Application Circuit
2.6W Mono Filterless Class-D Audio Power Amplifier DESCRIPTION The SN200 is a 2.6W high efficiency filter-free class-d audio power amplifier in a.5 mm.5 mm wafer chip scale package (WCSP) that requires
More informationOUTR- PVDD 4.5V TO 5.5V SUPPLY TOP VIEW
9-3589; Rev 2; 7/8 EVALUATION KIT AVAILABLE 2.8W, Low-EMI, Stereo, Filterless Class D General Description The high-efficiency, stereo, Class D audio power amplifier provides up to 2.8W per channel into
More informationPAM8002 Ultra Low EMI, 3W Filterless Mono Class D Audio Power Amplifier with Anti-saturation
Key Features One-side Modulation Active Emissions Significantly Reduce EMI Unique Anti-saturation Technology with Maximum Output Power Setting Reduce Distortion and Protect Speaker to be Damaged High Efficiency
More informationEUA2011A. Low EMI, Ultra-Low Distortion, 2.5-W Mono Filterless Class-D Audio Power Amplifier DESCRIPTION FEATURES APPLICATIONS
Low EMI, Ultra-Low Distortion, 2.5-W Mono Filterless Class-D Audio Power Amplifier DESCRIPTION The EUA2011A is a high efficiency, 2.5W mono class-d audio power amplifier. A new developed filterless PWM
More informationA2331 AUDIO AMPLIFIER MONAURAL 3W NON-CLIP DIGITAL
DESCRIPTION is a 3W (VDD = 5.0V, RL = 4Ω) high efficiency filter-free class-d audio power amplifier in a wafer chip scale package (CSP). has a Professional non-clip output control circuit which reducing
More informationEUA W Mono Filterless Class-D Audio Power Amplifier
.5-W Mono Filterless Class-D Audio Power Amplifier DESCRIPTION The EUA2005 is a high efficiency,.5w mono class-d audio power amplifier. A low noise, filterless PWM architecture eliminates the output filter,
More informationPAM8008. Pin Assignments. Description. Applications. Features. A Product Line of. Diodes Incorporated
3W STEREO CLASS-D with DC VOLUME, POWER LIMIT and ANTI-SATURATION Description The is a 3W, Class-D audio amplifier. Advanced 64-step DC volume control minimizes external components and allows speaker volume
More informationTDA7495S 11W +11W AMPLIFIER
11 11 AMPLIFIER 1111 OUTPUT POER RL =. @THD = % VCC = 2V STBY AND MUTE FUNCTIONS LO TURNON TURNOFF POP NOISE NO BOUCHEROT CELL NO STBY RC INPUT NETORK SINGLE SUPPLY RANGING UP TO 3V SHORT CIRCUIT PROTECTION
More informationMono Filter-less Class-D Audio Power Amplifier
SN00B 3W@5.0V Mono Filter-less Class-D Audio Power Amplifier General Description The SN00B is a high efficiency, 3W@5.0V mono filter-less Class-D audio power amplifier. A low noise, filter-less PWM architecture
More informationLY8271A 16Wx2(BTL) Stereo / 20Wx1(PBTL) Mono Class D Audio Amplifier With Built-in Step-up Converter
FEATURES GENERAL DESCRIPTION Operation Voltage:.9V ~ V power supply. Adjustable boost converter output up to 4V. Differential or Single-end inputs. kinds of output type options: xbtl xpbtl mode. Output
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD DUAL 2.2W AUDIO AMPLIFIER PLUS STEREO HEADPHONE FUNCTION DESCRIPTION The UTC L4863 is a dual bridge-connected audio power amplifier. It combines dual bridge speaker amplifiers
More informationMPQ7731 5W - 30W Class D Mono Bridged Audio Amplifier Available in AEC-Q100
MPQ7731 5W - 30W Class D Mono Bridged Audio Amplifier Available in AEC-Q100 DESCRIPTION The MPQ7731 is a mono, 5W - 30W Class D Audio Amplifier. It is one of MPS second generation of fully integrated audio
More informationVDD 0.1 F A1 C1 IN+ IS31AP2145A IN- CTRL GND. Figure 1 Typical Application Circuit (Differential Input)
2.9W@5.0V MONO CLIP-LESS & FILTER-LESS CLASS-D AUDIO POWER AMPLIFIER GENERAL DESCRIPTION The IS3AP245A is a 2.9W@5.0V mono, clip-less, filter-less, high efficiency Class-D audio power amplifier with automatic
More informationA2211 CLASS AB 1.25 W DIFFERENTIAL AUDIO POWER AMPLIFIER WITH INTERNAL FEEDBACK CIRCUIT
DESCRIPTION The is a fully differential audio power amplifier designed for portable communication device applications. The is capable of delivering 1.25W of continuous average power to an 8Ω BTL load with
More informationPAM8012. Description. Pin Assignments. Features. Applications. A Product Line of. Diodes Incorporated
MONO 2.0W ANTI-SATURATION CLASS-D AUDIO POWER AMPLIFIER with POWER LIMIT Description Pin Assignments The is a 2.0W mono filterless class-d amplifier with high PSRR and differential input that reduce noise.
More informationSGM8908 Capless 3Vrms Line Driver with Adjustable Gain
GENERAL DESCRIPTION The is a 3Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal for single
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD +W DUAL BRIDGE AMPLIFIER DESCRIPTION The UTC is a +W dual bridge amplifier specially designed for TV and Portable Radio applications. HZIP-A FEATURES * Wide Supply Voltage
More informationESMT Preliminary AD52068
2x20W Stereo Class-D Audio Amplifier with Power Limit Features Single supply voltage 4.5V ~ 26V for loudspeaker driver Built-in LDO output 5V for others Loudspeaker power from 24V supply BTL Mode: 20W/CH
More informationTHE PHYSICAL MAP GENERAL DESCRIPTION APPLICATIONS BLOCK DIAGRAM FEATURES SHENZHEN XPTEK TECHNOLOGY CO., LTD
GENERAL DESCRIPTION SHENZHEN XPTEK TECHNOLOGY CO., LTD The is an audio power amplifier primarily designed for demanding applications in low-power portable systems. It is capable of delivering 5 watts of
More informationSGM89000 Capless 2Vrms Line Driver with Adjustable Gain
GENERAL DESCRIPTION The SGM89000 is a 2Vrms pop/click-free stereo line driver designed to allow the removal of the output DC-blocking capacitors for reduced component count and cost. The device is ideal
More informationSGM mW Differential Input, Stereo Audio Power Amplifier
SGM482 2mW Differential Input, GENERAL DESCRIPTION The SGM482 is a stereo audio power amplifier with differential inputs. Operating on a single 5V power supply, it delivers 2mW of continuous RMS power
More informationFilterless, High Efficiency, Mono 3 W Class-D Audio Amplifier SSM2335
FEATURES Filterless Class-D amplifier with Σ-Δ modulation No sync necessary when using multiple Class-D amplifiers from Analog Devices, Inc. 3 W into 3 Ω load and.4 W into 8 Ω load at 5. V supply with
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 10+10W DUAL BRIDGE AMPLIFIER DESCRIPTION The UTC TDA797 is a dual bridge amplifier, it uses UTC advanced technology to provide customers with wide supply voltage, stand-by
More informationCE0030A. Audio Power Amplifier with low power supply INTRODUCTION FEATURES PIN DIAGRAM
Audio Power Amplifier with low power supply INTRODUCTION The is a fully differential audio power amplifier designed for portable communication device applications. It is capable of delivering 1 watt of
More informationOBSOLETE. Filterless High Efficiency Class-D Stereo Audio Amplifier SSM2302 FEATURES APPLICATIONS GENERAL DESCRIPTION FUNCTIONAL BLOCK DIAGRAM
FEATURES Filterless Class-D amplifier with built-in output stage.4 W into 8 Ω at 5. V supply with less than % THD 85% efficiency at 5. V,.4 W into 8 Ω speaker Better than 98 db SNR (signal-to-noise ratio)
More informationIS31AP W STEREO CLASS-D AUDIO AMPLIFIER WITH POWER LIMIT AND DYNAMIC TEMPERATURE CONTROL November 2015
W STEREO CLASS-D AUDIO AMPLIFIER WITH POWER LIMIT AND DYNAMIC TEMPERATURE CONTROL November 5 GENERAL DESCRIPTION The IS3AP20 is a high efficiency stereo Class-D audio amplifier with adjustable power limit
More informationKA334. Dual Power Operational Amplifier. Description. Features. Applications. Internal Block Diagram VCC OUT1 OUT2. NC Vcc VEE/GND GND VEE/GND GND GND
Dual Power Operational Amplifier www.fairchildsemi.com Features Output Current upto 0.7A Operates at Low Voltage (VS(MIN)=4V) Low Saturation Voltage (Ip=0.5A, VO=.5V) Thermal Shutdown (TSD=0 C) Ground
More informationIS31AP W AUDIO POWER AMPLIFIER WITH ACTIVE-HIGH STANDBY MODE. August 2013
.W AUDIO POWER AMPLIFIER WITH ACTIVE-HIGH STANDBY MODE August 03 GENERAL DESCRIPTION The IS3AP4996 has been designed for demanding audio applications such as mobile phones and permits the reduction of
More informationIS31AP W AUDIO POWER AMPLIFIER WITH ACTIVE-LOW STANDBY MODE. October 2012
.W AUDIO POWER AMPLIFIER WITH ACTIVE-LOW STANDBY MODE October 0 GENERAL DESCRIPTION The IS3AP499 has been designed for demanding audio applications such as mobile phones and permits the reduction of the
More information2.95W Mono Filter-less Class-D Audio Power Amplifier
.95W Mono Filter-less Class-D Audio Power Amplifier General Description The SN005 is a high efficiency,.95w mono Class-D audio power amplifier. A low noise, filter-less PWM architecture eliminates the
More informationDIO Vrms Audio Driver with Adjustable Gain
Rev.2 Features Voltage Output at 600Ω Load 2Vrms with 3.3V supply voltage 3Vrms with 5.0V supply voltage Ultra Low noise and THD SNR>2dB Typical Vn00dB No Pop/Clicks Noise when Power ON/OFF
More informationTPA6110A2 150-mW STEREO AUDIO POWER AMPLIFIER
TPA6A2 5-mW STEREO AUDIO POWER AMPLIFIER SLOS34 DECEMBER 2 5 mw Stereo Output PC Power Supply Compatible Fully Specified for 3.3 V and 5 V Operation Operation to 2.5 V Pop Reduction Circuitry Internal
More informationSGM Watt Audio Power Amplifier GENERAL DESCRIPTION FEATURES. PIN CONFIGURATIONS (Top View) APPLICATIONS
. Watt Audio Power Amplifier GENERAL DESCRIPTION The is a.-w, fully integrated, audio power amplifier. It is designed to maximize audio performance in portable applications such as mobile phone. The portable
More informationUNISONIC TECHNOLOGIES CO., LTD KA8602
UNISONIC TECHNOLOGIES CO., LTD KA02 LOW VOLTAGE AUDIO POWER AMPLIFIER DESCRIPTION The UTC KA02 is the audio power amplifier available for low voltage. The UTC KA02 supplies differential outputs for maximizing
More information1.2W Audio Power Amplifier with Active-low Standby Mode
1.2W Audio Power Amplifier with Active-low Standby Mode General Description The SN4991 has been designed for demanding audio applications such as mobile phones and permits the reduction of the number of
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD 2W X 2 CLASS AB AUDIO POWER AMPLIFIER (WITH DC_VOLUME CONTROL) DESCRIPTION DIP-16 UTC PA7493 provides precise DC volume control, and a stereo bridged audio power amplifiers
More information5.5W Anti-Clipping Mono Class D Audio Amplifier with Boost Converter
5.5W Anti-Clipping Mono with Boost Converter FEATURE Anti-Clipping Function (ACF) Filter-less Modulation, Eliminating Output Filter Output Power 5.5W (VBAT=4.2V, = 6.5V, RL=4Ω, THD+N=10%) 3.0W (VBAT=4.2V,
More informationTDA7233 TDA7233D 1W AUDIO AMPLIFIER WITH MUTE
TDA7233 TDA7233D 1 AUDIO AMPLIFIER ITH MUTE OPERATING VOLTAGE 1.8 TO 15V EXTERNAL MUTE OR POER DON FUNCTION IMPROVED SUPPLY VOLTAGE REJECTION LO QUIESCENT CURRENT HIGH POER CAPABILITY LO CROSSOVER DISTORTION
More informationPAM8620. Description. Pin Assignments. Features. Applications. Typical Applications Circuit. A Product Line of. Diodes Incorporated
15W STEREO CLASS-D AUDIO POWER AMPLIFIER WITH POWER LIMIT Description Pin Assignments The is a 15W (per channel) stereo Class-D audio amplifier which offers low THD+N (0.2%), low EMI and good PSRRd thus
More information2 2W Filterless Class-D Stereo Audio Amplifier SSM2356 FEATURES. APPLICATIONS Mobile phones MP3 players Portable gaming Portable electronics
FEATURES Filterless stereo Class-D amplifier with Σ-Δ modulation No sync necessary when using multiple Class-D amplifiers from Analog Devices, Inc. 2 2W into 4 Ω load and 2x.4 W into 8 Ω load at 5. V supply
More informationHT82V7524 3W Mono Filter-free Class-D Audio Power Amplifier
3W Mono Filter-free Class-D Audio Power Amplifier Features 1.8V to 6V Single Supply Output Power: 3W at 5V and 4Ω speaker 5.1W at 6V and 3Ω speaker Up to 90% power efficiency Automatic output power control
More information