Programmable Active Crystal Filters Catalog

Transcription

1 Programmable Active Crystal Filters Catalog

2 AERONAUTICAL BAND PROGRAMMABLE ACTIVE CRYSTAL FILTER* MHz ACFA1-25 Crystal filter based filtering system, 25 KHz BW Software programmable tuning, 1.25 KHz steps Sharp filtering response Front end LNA included for low noise figure User adjustable gain High linearity Transmitter Bypass (TXBP) Module as optional N(f) to SMA(m) jumpers included, 1 ft, 2 pcs Programmable Active Crystal Filter (US Patent Protected) DOC TW Fiplex is a registered trademark of Fiplex Communications, Inc. Fiplex Communications, Inc. reserves the right to change specifications without prior notice. Air-to-Ground and Ground Communications Systems Repeaters sites, mobile and base station Highly congested RF environments Mobile including Vehicles Programmable Crystal Filter* Frequency band MHz range Bandwidth 25 KHz Programmable steps 1.25 KHz Rejection 30 dbc adjacent channel (+/-25 KHz) 60 dbc semi-adjacent channel (+/-50 KHz) Spurious < -9 Overall gain, max 25 db Adjustable gain range 20 db range Maximum output power Maximum input power, no damage Overload protection Yes, self recovery 1.5:1 max Noise figure <4 db at max gain Alarms Yes, LNA failure, Main Power Supply failure, Backup Power Supply failure, Overload, Excessive Input Power Alarms output LEDs and Dry Contacts SMA (f) Programming Via USB I/O ports, communications Via RS232 (optional) 12 to 48 VDC 5W Dimension 8 x 6 x 1 inches 203 x 152 x 25 mm 2.2 lbs 1.0 kg

3 VHF PROGRAMMABLE ACTIVE CRYSTAL FILTER* MHz ACF1 Series Crystal filter based filtering system Software programmable tuning, 1.25 KHz steps Sharp filtering response Front end LNA included for low noise figure User adjustable gain High linearity Transmitter Bypass (TXBP) Module as optional N(f) to SMA(m) jumpers included, 1 ft, 2 pcs Programmable Active Crystal Filter (US Patent Protected) DOC TW Fiplex is a registered trademark of Fiplex Communications, Inc. Fiplex Communications, Inc. reserves the right to change specifications without prior notice. P25, DMR, NXDN, TETRA, Conventional and others Repeaters sites, mobile and base station Highly congested RF environments Mobile applications like trains, cars, trucks Programmable Crystal Filter* Frequency bands and Bandwidths ACF MHz range & 12.5 KHz BW ACF MHz range & 12.5 KHz BW ACF MHz range & 25 KHz BW ACF MHz range & 25 KHz BW Programmable steps 1.25 KHz Rejection 12.5KHz BW 30 dbc adjacent channel (+/-12.5 KHz) 60 dbc semi-adjacent channel (+/-25 KHz) 25KHz BW 30 dbc adjacent channel (+/-25 KHz) 60 dbc semi-adjacent channel (+/-50 KHz) Spurious < -9 Overall gain, max 25 db Adjustable gain range 20 db range Maximum output power Maximum input power, no damage Overload protection Yes, self recovery 1.5:1 max Noise figure <4 db at max gain Alarms Yes, LNA failure, Main Power Supply failure, Backup Power Supply failure, Overload, Excessive Input Power Alarms output LEDs and Dry Contacts SMA (f) Programming Via USB I/O ports, communications Via RS232 (optional) 12 to 48 VDC 5W Dimension 8 x 6 x 1 inches 203 x 152 x 25 mm 2.2 lbs 1.0 kg

4 UHF PROGRAMMABLE ACTIVE CRYSTAL FILTER* MHz ACF4 Series Crystal filter based filtering system, 12.5KHz, 25KHz and 50KHz BW Software programmable tuning, KHz steps Sharp filtering response Front end LNA included for low noise figure User adjustable gain Transmitter Bypass (TXBP) available for transceivers applications N(f) to SMA(m) jumpers included, 1 ft, 2 pcs P25, DMR, NXDN, TETRA, Conventional and others Repeaters sites, mobile and base station High RF congested environments Mobile applications like trains and cars / trucks Programmable Active Crystal Filter (US Patent protected) DOC TW Fiplex is a registered trademark of Fiplex Communications, Inc. Fiplex Communications, Inc. reserves the right to change specifications without prior notice. Programmable Crystal Filter* Frequency bands and Bandwidths ACF MHz range & 50KHz BW ACF MHz range & 12.5KHz BW ACF MHz range & 25KHz BW ACF MHz range & 12.5KHz BW ACF MHz range & 25KHz BW ACF MHz range & 12.5KHz BW ACF MHz range & 25KHz BW Programmable steps KHz Rejection 12.5KHz BW 30 dbc adjacent channel (+/-12.5 KHz 60 dbc semi-adjacent channel (+/-25 KHz) 25KHz BW 30 dbc adjacent channel (+/-25 KHz) 60 dbc semi-adjacent channel (+/-50 KHz) 50KHz BW 16 dbc adjacent channel (+/-50 KHz) 40 dbc semi-adjacent channel (+/-100 KHz) Overall gain, max 25 db (+/-2 db) Adjustable gain range 20 db range Maximum output power Maximum input power, no damage Overload protection Yes, self recovery 1.5:1 max Noise figure <4 db at max gain Alarms Yes, LNA failure, Main Power Supply failure, Backup Power Supply failure, Overload, Excessive Input Power Alarms output LEDs and Dry Contacts SMA (f) Programming Via USB 12 to 48 VDC 5 W Dimension 8 x 6 x 1 inches 203 x 152 x 25 mm 2.2 lbs 1.0 kg Tx Bypass Yes, option TXB4, up to 50W

5 TRANSMITTER BYPASS Aeronautical, 118 to 869 MHz TXBP Series PIN diode based switch, no mechanical parts Allows the use of the Fiplex Active Crystal Filter* (ACF) Series in half duplex and simplex applications Low insertion loss High Tx/Rx isolation Small size Ready to be installed with Active Crystal Filters* (DC and RF cable jumpers included) Transmitter Bypass (TXBP) Mobile, base station, portable and any other radio equipment with single Tx/Rx antenna port TETRA, P25, DMR, NXDN, Conventional and others Air-to-Ground and Ground Communications Systems Mobile applications including Vehicles Highly congested RF environments Available for Aeronautical, VHF and UHF bands Connection TXBP DOC TW Fiplex Communications, Inc. reserves the right to change specifications without prior notice. Tx/Rx ACF OUT Active Crystal Filter (ACF) Antenna ACF IN Active Crystal Filter* (ACF) + Transmitter Bypass (TXBP) Active Crystal Filter* (ACF) + Transmitter Bypass (TXBP)

6 TRANSMITTER BYPASS Aeronautical, 118 to 869 MHz TXBP Series Transmitter Bypass Frequency band See table below Insertion loss See table below Maximum input power 50 W 1.31:1 max Tx/Rx and antenna ports: N(f) ACF IN and ACF out: SMA(f) 12 VDC 5 W Dimension 9 x 9 x 1.3 inches 227 x 228 x 34 mm 4 lbs 1.8 kg Model Frequency band Insertion loss TXBP-A MHz 0.4 db TXBP MHz 0.5 db TXBP MHz 0.5 db TXBP MHz 0.7 db TXBP MHz 0.7 db TXBP MHz 0.8 db TXBP MHz 1.2 db TXBP MHz 1.2 db DOC TW Fiplex Communications, Inc. reserves the right to change specifications without prior notice.

7 Fiplex Communications, Inc. develops, designs and manufactures a wide line of passive and active products for the Telecommunications Industry, which includes standard and customized solutions. Our product line offers solutions for site equipment, coverage enhancement and RF conditioning, from 25MHz to 2.5GHz, to be applied in: Conventional Two Way Radio systems Trunked radio systems like P25, TETRA, iden, TETRAPOL, MPT1326, among others. Cellular systems like GSM, GPRS/EDGE, CMDA, 1X, WCDMA, HSDPA TV and FM, analog and digital Our main goal is the total customer satisfaction, based on a high quality product commitment. Combined with our engineering experience and reputation, we become one of the most important high tech manufacturer for private and public sectors, such as military, police and civil defense. info@fiplex.com FIPLEX Headquarters 2101 NW 79th Avenue. FL US Ph: Fax: EMEA Office Calle Medes, 4-6, Local Barcelona. Spain europe.sales@fiplex.com Ph: