Maintenance/ Discontinued
|
|
- Angel Stevens
- 6 years ago
- Views:
Transcription
1 ICs f CD/CD-ROM Player AN83N 3-channel Linear Driver Overview The AN83N is an IC which incpates 3 circuits of drivers f driving various DC mots such as actuats (focus, tracking, traverse), sdles, and loading of the CD players, and the + low drop type power supply. Features Operating supply voltage range ; CC =. to 8 Built-in 3 circuits of voltage drivers (maximum drive current : 0mA) Stable circuit operation against supply voltage change and temperature change due to the built-in stabilized power supply Built-in + low drop power supply (external PNP power transist) Built-in reset circuit (reset voltage : 4.8) Built-in thermal protective circuit (operating temperature : 9 ; typ.) Built-in power cut circuit (mot driver only) Applications Linear driving of the DC mots and actuats of the CD players, CD radio cassette tape recder, and so on. Block Diagram CC.4±0.3.6± ~ RST Band gap (.) Thermal Shutdown Regulat (low sat) Mot Driver 00kW Err Mot Driver 3 00kW Err ø. 6.3± ±0..06±0..6± ± ± ± ±0. Unit : mm.± Lead DIP Package with Fin (HDIP06-P-0300) Mot Driver 00kW Err includes following four Product lifecycle stage. F P CC GND ( CC) REF
2 AN83N ICs f CD/CD-ROM Player Absolute Maximum Ratings (Ta=) Parameter Symbol Rating Unit Supply oltage Power Dissipation Operating Ambient Temperature CC P D T opr 0 0 ~ +80 mw Stage Temperature ~ + T stg Recommended Operating Range (Ta=) Parameter Symbol Range Operating Supply oltage Range CC. ~ 6 Electrical Characteristics (Ta=) Parameter Symbol Condition min. typ. max. Unit No Load Current Regulat Output oltage Regulat Load Change Regulat Input Change Reset Threshold oltage I CC RO D RI D RC RST CC= CC=, R L=W CC=, R L=W ~ W CC=. ~., R L=W ma m m Reset Threshold Hysteresis Width m Reset Operating Minimum oltage Input Offset oltage Output Offset oltage Gain (+) (+) ( ) Relative Gain Limit oltage (+) Limit oltage ( ) Dead Zone Width PC Input Threshold (L) PC Input Threshold (H) Mot Driver Output oltage at Reset Mot Driver 3 Output oltage at Reset Mot Driver Output oltage at Reset HYS R (min.) IOF OOF G + G R L+ L DZ PCL PCH RS 3RS RS Minimum CC oltage at which =Low CC=8, R L=0W, CC=8, R L=0W, CC=8, R L=0W, CC=8, R L=0W, CC=8, R L=0W, CC=8, R L=0W, CC=8, R L=0W, CC=8 CC=8 CC=3., R L=0kW CC=3., R L=0kW CC=3., R L=0kW Regulat External Transist Base Current Limit alue I 3LIM 9 6 ma Thermal Protective Circuit Operating Temperature Balancing alue T THD 9 Thermal Protective Circuit Operating Temperature Hysteresis Width DT THD 64 Note) The specified values of IOF, OOF, G +, G R, L+, L, and DZ are common ones f each of the mot driver, mot driver, and mot driver 3 circuits includes following four Product lifecycle stage m m db db m m m m
3 ICs f CD/CD-ROM Player AN83N Application Circuit (Used when driving the focus, tracking actuat, and traverse mot) from MN66 MN66 + 0kW AN83N PCC CC (shot circuit possible) A4 + mf Mot Driver Mot Driver Mot Driver 3 M REF (typ..) Pin Descriptions (The following description applies when the 3 channels f the mot drivers,, and 3 are used.) Pin No. Symbol I/O DC oltage ( CC/) P CC I CC I 3 TB O.3 4 MON I Equivalent Circuit 0kW 0kW F Description Power CC. Supplies a current flowing to the output power transist. CC. Not connected to the power CC. External PNP transist base connection External PNP transist collect connection (= ) includes following four Product lifecycle stage.
4 AN83N ICs f CD/CD-ROM Player Pin Descriptions (Cont.) (The following description applies when the 3 channels f the mot drivers,, and 3 are used.) Pin No. Symbol I/O DC oltage ( CC/) Equivalent Circuit Description RST O 00W Reset. Open collect output type. F GND I 0 F GND 8 REF I. 8 REF input TDI I. Driver err input 6 FDI I. TDI I. 9 TD O (0.3) 0 TD+ O (0.3) FD O (0.3) FD+ O (0.3) 3 TD O (0) 4 TD+ O (0) (P CC) Driver err input Driver 3 err input driver 3 inverting output driver 3 non-inverting driver inverting output driver non-inverting driver inverting output driver non-inverting 6 PC I 0 PC (power cut) input 0W 0 4 includes following four Product lifecycle stage.
5 Request f your special attention and precautions in using the technical infmation and semiconducts described in this book () If any of the products technical infmation described in this book is to be expted provided to non-residents, the laws and regulations of the expting country, especially, those with regard to security expt control, must be observed. () The technical infmation described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right other right owned by our company any other company. Therefe, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical infmation described in this book. (3) The products described in this book are intended to be used f standard applications general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance f infmation on the following applications: Special applications (such as f airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life suppt systems and safety devices) in which exceptional quality and reliability are required, if the failure malfunction of the products may directly jeopardize life harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this book are subject to change without notice f modification and/ improvement. At the final stage of your design, purchasing, use of the products, therefe, ask f the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. () When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable f any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconduct products. Measures on the systems such as redundant design, arresting the spread of fire preventing glitch are recommended in der to prevent physical injury, fire, social damages, f example, by using the products. (6) Comply with the instructions f use in der to prevent breakdown and characteristics change due to external facts (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting at customer's process. When using products f which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. () This book may be not reprinted reproduced whether wholly partially, without the pri written permission of Matsushita Electric Industrial Co., Ltd. includes following four Product lifecycle stage.
DATA SHEET. Part No. AN17821A
DATA SHEET Part No. Package Code No. AN17821A HSIP012-P-0000E Publication date: November 2006 1 Contents Applications. 3 Package.... 3 Type.... 3 Application Circuit Example... 4 Block Diagram.... 4 Pin
More informationMaintenance/ Discontinued
DATA SHEET Part No. Package Code No. AN17831A HSIP012-P-0000E planed Publication date: November 2006 1 Contents Applications. 3 Package.... 3 Type.... 3 Application Circuit Example... 4 Block Diagram....
More informationMaintenance/ Discontinued
AN Dual Operational Amplifier Overview The AN is a dual operational Amplifier with a phase compensation circuit built-in. It is suitable for application to various electronic circuits such as active filters
More informationMaintenance/ Discontinued
ICs for Mobile Communication AN8SSM Ripple filter IC Overview The AN8SSM is a ripple filter IC that rejects the ripple component superimposed on the regulator output. Use for the VCO bias of cellular phones
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN -W BTL audio power amplifier Overview The AN is an audio power amplifier IC with -ch output. The BTL (Balanced Transformer-Less) method can provide fewer external parts and
More informationMaintenance/ Discontinued
ICs for Optical Disk Drive AN8737SB 3-channel driver IC for optical disk drive Overview The AN8737SB is a BTL type 3-channel driver IC, adopting a current feedback system for channels, which makes it optimum
More informationMaintenance/ Discontinued
olyage Detector IC CMOS IC for oltage Detection Overview The are elements that monitor the power supply voltage supplied to microcomputers and other LSI systems and issue reset signals for initializing
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN74 Dual. Audio Power Amplifier Overview The AN74 is an integrated circuit designed for power amplifier of. (9V, 4Ω) output. Stereo operation is enabled due to incorporating two
More informationMaintenance/ Discontinued
Operational Amplifier ANSSM CMOS single power supply Overview ANSSM is an operational amplifier with a single power supply by CMOS diffusion process. It has low current-consumption compared to general
More informationMaintenance/ Discontinued
ICs for Audio Common Use ANN Dual.W Audio Power Amplifier Overview The ANN is an integrated circuit designed for power amplifier of.w (.V, Ω) output. Stereo operation is enabled due to incorporating two
More informationMaintenance/ Discontinued
ICs for TV AN723 3-W BTL audio power amplifier Overview The AN723 is an audio power amplifier IC of -ch. output. In the BTL (balanced transformerless) method, fewer external parts and easier design for
More informationMaintenance/ Discontinued
DATA SHEET Part No. Package Code No. HSIP003-P-0000Q includes following four Product lifecycle stage. Publication date: October 2008 1 Contents Overview. 3 Features.. 3 Applications 3 Package. 3 Type....
More informationMaintenance/ Discontinued
DATA SHEET Part No. Package Code No. SSIP003-P-0000S (Exclusive use for AN80xx) includes following four Product lifecycle stage. Publication date: October 2008 1 Contents Overview. 3 Features.. 3 Applications
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN752 Dual -W BTL audio power amplifier Overview The AN752 is an audio power amplifier IC for stereo system. The BTL (Balanced Transformer-Less) method can provide fewer external
More informationMaintenance/ Discontinued
ICs for TV AN22 Dual -W BTL audio power amplifier Overview AN22 is an audio power amplifier IC for the stereo system. In the BTL (balanced transformerless) method, fewer external parts and easier design
More informationMaintenance/ Discontinued
DATA SHEET Part No. Package Code No. AN781NSP SP-SUA Publication date: October 008 1 Contents Overview. Features.. Applications Package. Type.... Block Diagram.... 4 Pin Descriptions. 5 Absolute Maximum
More informationMaintenance/ Discontinued
Small Signal Transistor Arrays UNA225 (UN225) Silicon PNP epitaxial planar type (4 elements) Silicon NPN epitaxial planar type (4 elements) For motor drives Features Small and lightweight Low power consumption
More informationMaintenance/ Discontinued
DATA SHEET Part No. Package Code No. SOP008-P-0225G includes following four Product lifecycle stage. Publication date: October 2008 Contents Overview. 3 Features. 3 Applications. 3 Package.. 3 Type.. 3
More informationMaintenance/ Discontinued
ICs for Cassette, Cassette Deck AN751K, AN751SC Dual Pre-Amplifier ICs for Hi-Fi Cassette Deck Overview The AN751K and the AN751SC are the single chip ICs designed for pre-amp. for stereo cassette (double
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN7395K, AN7395S Spatializer IC (3-D Surround) Overview Spatializer Audio Processor is a signal processing technology, monopolized by Desper Products, Inc., that was developed
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN Dual Channel BTL Power Amplifier Overview AN is a monolithic integrated circuit designed for. W ( V, Ω) output audio power amplifier.it is a dual channel BTL IC suitable for
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN9 Dual.W Audio Power Amplifier Overview The AN9 is an integrated circuit designed for low distortion, low noise and low power dissipation audio set of.w (.V, Ω) output. Stereo
More informationMaintenance/ Discontinued
ICs for Compact Disc/CD-ROM Player AN8481SB Spindle motor driver IC for optical disk Overview The AN8481SB is a high performance IC suited for driving a spindle motor of an optical disk such as CD-ROM,
More informationMaintenance/ Discontinued
DATA SHEET Part No. Package Code No. HSIP003-P-0000Q includes following four Product lifecycle stage. Publication date: October 2008 1 DATA SHEET Part No. Package Code No. HSIP003-P-0000Q includes following
More informationMaintenance/ Discontinued
ICs for / Tuner AN77, AN77S Tuner, / IF Amplifier Circuit Overview The AN77 and the AN77S are the ICs designed for Hi-Fi stereo tuner. They are functioned with stop signal pin besides the AN7S function.
More informationMaintenance/ Discontinued
This product complies with the RoHS Directive (EU 22/95/EC). Optoisolators CNCS7 (ON37) Optoisolator For isolated signal transmission Features High current transfer ratio: CTR > 5% High I/O isolation voltage:
More informationMaintenance/ Discontinued
AN, ANS General Purpose Long Interval Timers Overview The AN and ANS are ICs designed for general purpose long interval timers. They consists of an oscillator, frequency divider (flip-flop steps), output
More informationMaintenance/ Discontinued
Infrared Light Emitting Diodes GaAs Infrared Light Emitting Diode For optical control systems This product complies with the RoHS Directive (EU 22/95/EC). Features High-power output, high-efficiency: P
More informationMaintenance/ Discontinued
N00, N00S Overvoltage Protective Circuits Built-in Switching Power Supply Overview The N00 and the N00S enables high-speed control up to 00 khz and have various protective functions for overcurrent, overvoltage,
More informationMaintenance/ Discontinued
Optoisolators (Photocouplers) This product complies with the RoHS Directive (EU 22/95/EC). CNCS (ON33) Optoisolators Overview CNCS is a DIL type 4-pin single-channel optoisolator which is housed in a small
More informationMaintenance/ Discontinued
ICs for Compact Disc/CD-ROM Player AN8730SB 4-channel driver IC for optical disk Overview The AN8730SB is a 4-channel driver IC, which can operate in a low voltage, employing the low power consumption
More informationMaintenance/ Discontinued
Transmissive Photosensors (Photo lnterrupters) This product complies with the RoHS Directive (EU /95/EC). CNAK (ON) Photo lnterrupter For contactless SW and object detection Overview CNAK is an ultraminiature,
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN7555Z BTL output power IC for car audio Overview The AN7555Z is an audio power IC developed as the sound output of car audio (35 W 4-channel). It has realized the voltage gain
More informationDiscontinued AN W 2 (18 V, 8 Ω) Power Amplifier with Mute Function and Volume Control
ICs for Audio Common Use 4.0 W 2 (8 V, 8 Ω) Power Amplifier with Mute Function and Volume Control Overview The is a monolithic integrated circuit designed for 4.0 W (8 V, 8 Ω) output audio power amplifier.
More informationLNJ757W86RA. High Bright Surface Mounting Chip LED. ESS Type. Absolute Maximum Ratings T a = 25 C. Lighting Color
High Bright Surface Mounting Chip LED ESS Type Absolute Maximum Ratings T a = 5 C Power dissipation P D 75 mw Forward current I F 0 ma Pulse forward current * I FP 70 ma Reverse voltage V R 5 V Operating
More informationMaintenance/ Discontinued
This product complies with the RoHS Directive (EU 22/95/EC). Transistors Silicon NPN epitaxial planar type For low-frequency output amplification Complementary to 2SA1531 Features Low noise voltage NV
More informationMaintenance/ Discontinued
MN Series MN 8-Stage Ultra Low Voltage Operation BBD for Audio Signals Overview The MN is a 8-stage ultra low voltage operation BBD variable delay line in audio frequency range. The device operates on
More informationMaintenance/ Discontinued
ICs for T AN5177NK IF/SIF Signal Processor IC for T and CR Overview The AN5177NK is a IF/SIF signal processor IC for T and CR. Features PLL full-synchronization detection An equalization amplifier for
More informationMaintenance/ Discontinued
Infrared Light Emitting Diodes This product complies with the RoHS Directive (EU 22/95/EC). LNA2WL (LN57) GaAs Infrared Light Emitting Diode For optical control systems Features High-power output, high-efficiency:
More informationMaintenance/ Discontinued
ICs for Compact Disc/CD-ROM Player AN8472SA Spindle motor driver IC for optical disk Overview The AN8472SA is a high performance IC suited for driving a spindle motor of an optical disk such as CD-ROM,
More informationMaintenance/ Discontinued
Optoisolators (Photocouplers) This product complies with the RoHS Directive (EU 22/95/EC). CNZ373 (ON373) Optoisolators Overview The CNZ373 of optoisolators consist of a GaAs infrared LED which is optically
More informationMaintenance/ Discontinued
ICs for FM/AM Tuner FM-IF, NC, MPX IC for car radio Overview The is an IC having FM-IF, NC and MPX functions for car radio. A tuner block of car radio can be constructed in combination with the AN7289NFBQ/NSC.
More informationMaintenance/ Discontinued
ICs for Cassette, Cassette Deck AN78S Recording/Playback Pre-/Power Amplifier IC for V Microcassette Overview The AN78S is an integrated circuit developed for recording playback pre-/power amp., built-in
More informationMaintenance/ Discontinued
ICs for / Tuner AN7289NSC -FE+ IC for car radio Overview The AN7289NSC is an IC having -FE+ functions for car radio. A tuner block of car radio can be constructed by combination of this IC and the AN7293NSC
More informationMaintenance/ Discontinued
Others 32-bit Shift Register atch Driver IC Overview The is an IC which iorporates a 32-bit shift register and a latch driver to meet high-speed operation low power consumption and high-density printout
More informationMaintenance/ Discontinued
Infrared Light Emitting Diodes This product complies with the RoHS Directive (EU 22/95/EC). LNA293L (LN66A) GaAs Infrared Light Emitting Diode For remote control systems Features High-power output, high-efficiency:
More informationMaintenance/ Discontinued
Zener Diodes Silicon planar type For constant voltage, constant current, waveform clipper and surge absorption circuit Features SS-Mini type 2-pin package (SSMini2-F) Low noise type V Z rank classified(v
More informationMaintenance/ Discontinued
ICs for FM/AM Tuner ANS FM Front-end Circuit for Car Radio Overview The ANS is an FM front-end IC designed for DTS except RF amp. of car radio. It is built-in local oscillation frequency buffer output
More informationMaintenance/ Discontinued
Is for Audio ommon Use AN74 Dual 3. W Audio Power Amplifier Overview The AN74 is a monolithic integrated circuit designed for dual audio power amplifier of portable radio cassette. Features Audio output
More informationMaintenance/ Discontinued
ICs for TV AN5186FB VIF/SIF IC for car-tv Overview The AN5186FB is a VIF/SIF signal processing IC for in-car television. The video and sound are completely separated by the adoption of split carrier method.
More informationFK Silicon N-channel MOS FET. For switching circuits. Overview. Package. Features. Marking Symbol: CV. Packaging
FK6 Silicon N-channel MOS FET For switching circuits Overview FK6 is N-channel small signal MOS FET employed small size surface mounting package. Features High-speed switching Low drain-source ON resistance:
More informationMaintenance/ Discontinued
ICs for TV AN5385K Contour correction IC Overview The AN5385K is an IC which conducts contour correction for luminance signal and color difference signal. It corresponds to all broadcasting systems of
More informationDATA SHEET. Part No. AN44075A
DATA SHEET Part No. Package Code No. AN4407A HSOP034-P-0300A Publication date: October 2008 1 Contents Overview.. 3 Features.. 3 Applications. 3 Package. 3 Type.... 3 Application Circuit Example (Block
More informationMaintenance/ Discontinued
Vertical Driver SI for Video Camera CCD Area Image Sensor Overview The is a vertical driver SI for a two-dimensional interline CCD image sensor. It features a built-in power supply circuit that, in conjunction
More informationDMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) Unit: mm. For general amplification.
DMG24 Silicon NPN epitaxial planar type (Tr) Silicon PNP epitaxial planar type (Tr2) Unit: mm For general amplification Features High forward current transfer ratio h FE with excellent linearity Low collector-emitter
More informationMaintenance/ Discontinued
ICs for Digital Still Camera Sound input/output interface IC for digital still camera Overview The is a sound input/output interface IC which is optimum for incorporation of sound functions in a digital
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN7348K Dual Record/Playback Pre-Amplifier IC for Double Cassette Overview The AN7348K is a monolithic integrated circuit designed for double cassette recorder. It has dual channel
More informationDMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) For digital circuits DMG26401 in SMini6 type package
Silicon NPN epitaxial planar type (Tr) Silicon PNP epitaxial planar type (Tr2) For digital circuits DMG264 in SMini6 type package Unit: mm Features Low collector-emitter saturation voltage V CE(sat) Halogen-free
More informationMaintenance/ Discontinued
Hall ICs DN6852 Switch type, Wide operating supply voltage range (V CC = 3.6 V to 16 V) One-way magnetic field operation Overview DN6852 is a semiconductor integrated circuit utilizing the Hall effect.
More informationDMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) For general amplification DMG20401 in SMini6 type package
DMG54 Silicon NPN epitaxial planar type (Tr) Silicon PNP epitaxial planar type (Tr2) For general amplification DMG24 in SMini6 type package Unit: mm Features High forward current transfer ratio h FE with
More informationMaintenance/ Discontinued
Hall ICs DN8897/SE/S Wide operating temperature range ( 4 C to + C) Alternating magnetic field operation DN8897 4.5±.2 4.±.2 Unit: mm 2.±.2 (.7) (5 ) Overview In each of Hall ICs, a Hall element, an amplifier
More informationDMG Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) Unit: mm. For general amplification.
DMG242 Silicon NPN epitaxial planar type (Tr) Silicon PNP epitaxial planar type (Tr2) Unit: mm For general amplification Features High forward current transfer ratio h FE with excellent linearity Low collector-emitter
More informationMaintenance/ Discontinued
Hall ICs DN6848/SE/S Wide operating temperature range ( 40 C to +00 C) One-way magnetic field operation Overview In each of Hall ICs, a Hall element, an amplifier circuit, a Schmidt circuit, a stabilized
More informationMaintenance/ Discontinued
PLL LSI with Built-In Prescaler Overview The is a CMOS LSI for a phase-locked loop (PLL) frequency synthesizer with serial data parameter input. It consists of a two-coefficient prescaler, variable frequency
More informationDME20B01. Silicon PNP epitaxial planar type (Tr1) Silicon NPN epitaxial planar type (Tr2) For general amplification. Features. Marking Symbol: A3
DME2B Silicon PNP epitaxial planar type (Tr) Silicon NPN epitaxial planar type (Tr2) For general amplification Unit: mm Features High forward current transfer ratio h FE with excellent linearity Low collector-emitter
More informationXN04312 (XN4312) Silicon NPN epitaxial planar type (Tr1) Silicon PNP epitaxial planar type (Tr2) Composite Transistors. For switching/digital circuits
Composite Transistors XN (XN) Silicon NPN epitaxial planar type (Tr) Silicon PNP epitaxial planar type (Tr) For switching/digital circuits Features Two elements incorporated into one package (Transistors
More informationI F = I R = 100 ma, I rr = 0.1 I R, Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes.
Silicon epitaxial planar type For small current rectification DB2J316 in SSMini2 type package Unit: mm Features Low forward voltage V F Short reverse recovery time t rr Halogen-free / RoHS compliant (EU
More informationDMC904F0. Silicon NPN epitaxial planar type. For high frequency amplification. Features. Marking Symbol: D3. Basic Part Number.
DMC9F Silicon NPN epitaxial planar type For high frequency amplification Unit: mm Features High forward current transfer ratio h FE with excellent linearity High transition frequency f T Halogen-free /
More informationMaintenance/ Discontinued
Cs for CD/CD-RM Player AN888SB Three-Beam Method Head Amplifier C for CD (supporting the hologram pick-up) verview The AN888SB is a head amplifier C supporting the digital servo (supporting the voltage
More informationDSA7101. Silicon PNP epitaxial planar type. For low frequency amplification Complementary to DSC7101. Features. Marking Symbol: 4C.
DSA711 Silicon PNP epitaxial planar type For low frequency amplification Complementary to DSC711 Unit: mm Features Low collector-emitter saturation voltage V CE(sat) Halogen-free / RoHS compliant (EU RoHS
More informationUNA0216 (UN216) Silicon PNP epitaxial planar type (3 elements) Silicon NPN epitaxial planar type (3 elements) Small Signal Transistor Arrays
Small Signal Transistor Arrays UNA26 (UN26) This product complies with the RoHS Directive (EU 22/95/EC). Silicon PNP epitaxial planar type (3 elements) Silicon NPN epitaxial planar type (3 elements) For
More informationBAS16 Silicon epitaxial planar type
Silicon epitaxial planar type For high speed switching circuits Panasonic parts No. DAY101K 2.9 Unit : mm 0. 0.1 Features Small reverse current IR Short reverse recovery time trr Halogen-free / RoHS compliant
More informationDA2S00100L DA2S00100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3. For band switching. Internal Connection
Doc No. TT-EA-3073 Silicon epitaxial planar type For band switching 0.8 Unit: mm 0.3 Features Low forward dynamic resistance rf Halogen-free / RoHS compliant (EU RoHS / UL-9 V-0 / MSL:Level compliant)..6
More informationRSSI/Carrier Sense Sequence
RSSI/Carrier Sense Sequence Semiconductor Business Division AIS Company Panasonic Corporation 1 AP-MN87400_401-003 CONTENTS 1 PURPOSE... 3 2 RSSI MEASUREMENT SEQUENCE... 3 2.1 SETTING AT STARTUP... 3 2.2
More informationMaintenance/ Discontinued
Others 8-Bit Shift Register Latch Cotant Driver IC Overview The is a semiconductor integrated circuit which iorporates a 8-bit shift register, a latch driver and a cotant current driver to satisfy the
More informationMaintenance/ Discontinued
DATA SHEET Part No. Package Code No. AN7820B HSIP02-P-0000L Publication date: October 2008 Contents Overview.. 3 Features.. 3 Applications. 3 Package. 3 Type.... 3 Application Circuit Example 4 Block Diagram.
More informationDATA SHEET AN5832SA. Part No. SEMICONDUCTOR COMPANY MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD.
DATA SHEET Part No. Package Code No. AN5832SA SSOP032 - P - 0300AP SEMICONDUCTOR COMPANY MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD. Publication date: February 2005 1 Contents Features.. 3 Applications 3
More informationMaintenance/ Discontinued
ICs for VCR AN3389SB Recording/Playback Amplifier IC for 4-Head VCR Overview The AN3389SB is a multi-functional recording and playback IC with built-in auto-tracking interface, and automatic head selector
More informationDA3J101F0L DA3J101F0L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3
Revised : 201-06-0 Doc No. TT-EA-11766 Silicon epitaxial planar type For high speed switching circuits DAX101F in SMini type package 2.0 0. Unit: mm 0.1 Features Small reverse current IR Short reverse
More informationDA2J10100L DA2J10100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 3. For high speed switching circuits. Internal Connection
Revised : 03-05-9 Doc No. TT-EA-88 Silicon epitaxial planar type For high speed switching circuits.5 0.35 Unit: mm 0.3 Features Small reverse current IR Short reverse recovery time trr Halogen-free / RoHS
More informationFCAB22370L1 Gate resistor installed Dual N-channel MOS FET
Established : 205--23 Doc No. TT4-EA-5073 Revision. Gate resistor installed Dual N-channel For lithium-ion secondary battery protection circuits 3.05 6 5 4 Unit: mm Features Low source-source ON resistance:rss(on)
More informationMaintenance/ Discontinued
DATA SHEET Part No. AN26261A Package Code No. ULGA031-W-3525 includes following four Product lifecycle stage. Publication date: January 2006 1 Contents Overview. 3 Features.. 3 Applications 3 Package.
More informationDA4X106U0R Silicon epitaxial planar type
Established : 2010-0-19 Doc No. TT-EA-12528 DAX106U0R DAX106U0R Silicon epitaxial planar type For small current rectification 2.9 (0.95) (0.95) Unit: mm 0.13 Features Short reverse recovery time trr Low
More informationDA6X106U0R Silicon epitaxial planar type
Silicon epitaxial planar type For high speed switching circuits 2.9 0.3 Unit: mm 0.13 Features Short reverse recovery time trr Low terminal capacitance Ct Halogen-free / RoHS compliant (EU RoHS / UL-9
More informationMTM761110LBF MTM761110LBF. Silicon P-channel MOSFET. for Switching. Internal Connection. Pin name
MTM76111LBF Silicon P-channel MOSFET for Switching MTM76111LBF Unit: mm Features Low drain-source ON resistance:rds(on) typ = 26 mω (VGS = -4.5 V) Low drive voltage: 1.8 V drive Halogen-free / RoHS compliant
More informationParameter Symbol Conditions Min Typ Max Unit Forward voltage V F I F = 10 ma V V
Zener Diodes MAZDxxx Series Silicon planar type For constant voltage, constant current, waveform clipper and surge absorption circuit 0.60±0.05 0.20±0.05 0.2 +0.05 0.02 Unit: mm Features Low noise type.00±0.05.40±0.05
More informationFK L FK L. Silicon N-channel MOSFET. Doc No. TT4-EA Revision. 4. For switching FK in SMini3 type package
Established : 2-5-3 Revised : 25-5-8 Doc No. TT4-EA-385 FK353L Silicon N-channel MOSFET For switching FK333 in SMini3 type package FK353L Unit : mm Features Low drive voltage : 2.5 V drive Halogen-free
More informationDB4X501K0R Silicon epitaxial planar type
Silicon epitaxial planar type For high speed switching circuits DB2J501 in Mini type package 2.9 (0.95) (0.95) Unit: mm 0.1 Features Short reverse recovery time trr Low terminal capacitance Ct Halogen-free
More informationMTM232232LBF Silicon N-channel MOSFET
MTM33LBF Silicon N-channel MOSFET For switching MTM33LBF Unit: mm Features Low drain-source ON resistance:rds(on)typ. = mω (VGS = 4. V) Low drive voltage:.5 V drive Halogen-free / RoHS compliant (EU RoHS
More informationFK L Silicon N-channel MOS FET
Established : 2-5-7 Revised : 2-6-24 Doc No. TT4-EA-2576 FKL Silicon N-channel For switching FK5 in SSSMini type package.2. FKL Unit : mm. Features Low drive voltage: 2.5 V drive Halogen-free / RoHS compliant
More informationBAS16 Silicon epitaxial planar type
Silicon epitaxial planar type For high speed switching circuits Panasonic parts No. DAY101K 2.9 Unit : mm 0. 0.1 Features Small reverse current IR Short reverse recovery time trr Halogen-free / RoHS compliant
More informationDB2J50100L DB2J50100L. Silicon epitaxial planar type. Doc No. TT4-EA Revision. 2. For high speed switching circuits. Internal Connection
Revised : 03-- Doc No. TT-EA-350 Revision. Silicon epitaxial planar type For high speed switching circuits.5 0.35 Unit: mm 0.3 Features Short reverse recovery time trr Low terminal capacitance Ct Halogen-free
More informationDA6X102S0R Silicon epitaxial planar type
Silicon epitaxial planar type For high speed switching circuits 2.9 0.5 0.3 Unit: mm 0.13 Features Short reverse recovery time trr Low terminal capacitance Ct Halogen-free / RoHS compliant (EU RoHS / UL-9
More informationFK330309EL FK330309EL. Silicon N-channel MOSFET For switching circuits. Doc No. TT4-EA Revision. 2. Internal Connection.
Silicon N-channel MOSFET For switching circuits.. Unit : mm. Features Low drive voltage :.5 V drive Halogen-free / RoHS compliant (EU RoHS / UL-94 V- / MSL : Level compliant).8. Marking Symbol :X9 Packaging
More information130 Reverse current IR VR = 1 V. 20 A Temperature coefficient of zener voltage *3 SZ IZ = 5 ma mv/ C Note) 1.
Established : 009-0-4 Revised : 03-07-0 Doc No. TT4-EA-540 Silicon epitaxial planar type For constant voltage / For surge absorption circuit.5 0.35 Unit: mm 0.3 Features Excellent rising characteristics
More informationMTM761100LBF MTM761100LBF. Silicon P-channel MOSFET For Switching. Doc No. TT4-EA Revision. 2. Internal Connection. Pin Name
Established : 28-31 Revised : 2135 Doc No. TT4-EA443 MTM711LBF Silicon P-channel MOSFET For Switching Features Low Drain-source On-state Resistance : RDS(on) typ. = 3 m (VGS = -4. V) Low Drive Voltage
More informationMTM232270LBF Silicon N-channel MOSFET
MTM37LBF Silicon N-channel MOSFET For switching MTM37LBF Unit: mm MTM37 in SMini3 type package Features Low drain-source ON resistance:rds(on) typ. = 85 mω (VGS = 4. V) Low drive voltage:.5 V drive Halogen-free
More informationMTM861280LBF MTM861280LBF. Silicon P-channel MOSFET. Doc No. TT4-EA Revision. 2. For Switching. Internal Connection.
Established : 2-2-4 Revised : 237 Doc No. TT4-EA238 MTM8628LBF Silicon P-channel MOSFET For Switching MTM8628LBF Unit : mm Features Low drain-source On-state Resistance : RDS(on) typ. = 3 mω (VGS = -4.
More informationThis product complies with the RoHS Directive (EU 2002/95/EC).
This product complies with the RoS Directive (EU 2002/95/EC). Infrared Optical Module (IrDA) Infrared data link for cellular phones, peripheral devices Features Compliant with IrDA Ver.1.4 ight emitting
More informationMTM861270LBF MTM861270LBF. Silicon P-channel MOSFET. Doc No. TT4-EA Revision. 4. For Switching. Internal Connection.
Established : 28-9 Revised : 213 Doc No. TT4-EA34 MTM8127LBF Silicon P-channel MOSFET For Switching MTM8127LBF 1. 5.2 4 Unit : mm.13 Features Low drain-source On-state Resistance : RDS(on) typ = 8 m (VGS
More information