Maintenance/ Discontinued

Transcription

1 ICs for Digital Still Camera Sound input/output interface IC for digital still camera Overview The is a sound input/output interface IC which is optimum for incorporation of sound functions in a digital still camera. The sound pre-processing prior to the digital processing and sound post-processing after DAC are integrated on a single chip. This IC is effective to make the equipment compact. Features Functions required for the sound pre- and post-processings are integrated on a single chip The built-in microphone amp. and microphone power supply A built-in 0.5 W BTL amp. Built-in SP power save and electronic volume functions A beep circuit with electronic volume A built-in internal microphone amp. on/off function A built-in AGC switch A built-in AGC to a speaker amp. (Prevents the sound distortion, trembling sound and wire breakdown of the speaker at excessively high voltage signal input) Applications Digital still camera (DSC) Application Circuit Microphone input Power supply for microphone Speaker (0.75) ± ±0.05 (1.00) 9.00± ± to ± (0.75) LQFP048-P-0707A Recorder output Playback input 0.10 M 7.00± ±0.20 Unit: mm 0.10± ± max. Seating plane A/D converter includes following four Product lifecycle stage. D/A converter Line output Beep input Publication date: August 2001 SDB00078AEB 1

2 Application Circuit Example 47 kω 10 kω 10 kω V REF AGND 100 kω 4.7 µf Recorder output To A/D converter Microphone input V Line output V Gain adjustment HPF changeover SW V CCH AGND SP power save on/off SP_VCC 0.22 µf 2.2 µf 1 µf dbs 40 2 V µf 2.2 Ω db Microphone power supply 7 dbs 2 SP_ GND 6 Ω 34 SP power save µf 2.2 Ω VREFH 32 5 Det. AGC dbs 7 AGND 29 VREF-SP VREF 27 LPF Electronic volume AGC Electronic volume Vol. CTL 11 Beep input dbs µf 100 kω Microphone amp. on/off 15 EVR mute 14 VCC AGND 20 HPF changeover SW 12.3 dbs 19 Playback input 18 AGC on/off Vol. CTL Det. 12 EVR_CTL Standby changeover V From D/A converter EVR_CTL includes following four Product lifecycle stage. 2 SDB00078AEB

3 Pin Descriptions Pin No. Description 1 Speaker output (+) 2 GND (for SP) 3 Speaker output ( ) 4 1/2V CC-SP 5 Speaker amp. input 6 Mix. amp. output 7 GND 8 Beep mix. amp. input 9 Beep electronic volume output 10 Beep electronic volume controll 11 Beep input 12 Playback-system AGC detection pin 13 Mix. amp. input 14 Electronic volume output 15 EVR mute 16 Electronic volume control 17 GND 18 AGC changeover SW 19 Playback input 43 1/2V CCH (V REFH ) 20 HPF changeover SW 21 V CC 45 GND 22 Microphone amp. power save SW 23 1/2V CC (V REF ) 24 Standby changeover Absolute Maximum Ratings Pin No. Description 25 Recorder output 26 HPF operational amp. input 27 Operational amp. output 28 Operational amp. input 29 Operational amp. input 30 AGC output 31 GND 32 AGC detection pin 33 Wind noise HPF output 34 Wind noise HPF bias output 35 Wind noise HPF operational amp. input 36 Wind noise not through HPF input 37 Microphone amp. negative feedback pin 38 Microphone amp. output 39 SW against wind noise 40 Microphone amp. input 41 Microphone power supply 42 Microphone power supply smoothing pin 44 V CCH 46 Line output 47 Speaker power save SW 48 V CC-SP (for speaker drive) Parameter Symbol Rating Unit Supply voltage *2 V CC 3.5 V V CCH /V CC-SP 5.2 Supply current I CC A Power dissipation *3 P D 361 mw Operating ambient temperature *1 T opr 20 to +70 C Storage temperature * 1 T stg 55 to +150 C Note) *1: Except for the operating ambient temperature and storage temperature, all ratings are for T a = 25 C. *2: When used within the range not exceeding the absolute maximum ratings and the power dissipation. *3: The power dissipation shown is for the independent IC without a heat sink at T a = 70 C. includes following four Product lifecycle stage. SDB00078AEB 3

4 Recommended Operating Range Parameter Symbol Range Unit Supply voltage V CCH 4.50 to 5.00 V V CC 2.70 to 3.30 V CC-SP 2.70 to 5.00 Electrical Characteristics at V CCH = 4.9 V, V CC-SP = 4.3 V, V CC = 3.1 V, T a = 25 C Circuit current Parameter Symbol Conditions Min Typ Max Unit Circuit current without signal I VCCA Without signal ma (1A) (V CC -system) Circuit current without signal I VCCHA Without signal ma (2A) (V CCH -system) Circuit current without signal I VCCSA Without signal ma (3A) (V CC-SP -system) Circuit current without signal I VCCB I/O power save ma (1B) (V CC -system) Circuit current without signal I VCCHB I/O power save ma (2B) (V CCH -system) Circuit current without signal I VCCSB SP power save ma (3B) (V CC-SP -system) Circuit current without signal I VCCHC SP power save ma (3C) (V CCH -system) Circuit current without signal I VCCHD SP, I/O power save ma (3D) (V CCH -system) Circuit current without signal I VCCC Microphone amp. off ma (1C) (V CC -system) Power supply for microphone Microphone supply voltage V MIC Output current = 5 ma V Microphone amp. characteristics: Microphone amp. input Microphone amp. output Output level V ROM V IN = 37 dbs, 1 khz dbs Output THD 1 TH ROM1 V IN = 37 dbs, 1 khz, % up to 5th harmonic Output noise N ROM Without input, using A-curve filter dbs Output THD 2 TH ROM2 V IN = 33 dbs, 1 khz, % up to 5th harmonic Rec. AGC characteristics: AGC input Rec. input Rec. reference output level A V ROA V IN = 38 dbs, 1 khz dbs Rec. reference output THD 1A TH ROA V IN = 38 dbs, 1 khz, % up to 5th harmonic Rec. output noise voltage A VN ROA Without input, using A-curve filter dbs includes following four Product lifecycle stage. 4 SDB00078AEB

5 Electrical Characteristics at V CCH = 4.9 V, V CC-SP = 4.3 V, V CC = 3.1 V, T a = 25 C (continued) Parameter Symbol Conditions Min Typ Max Unit Rec. AGC characteristics (continued): AGC input Rec. input Microphone AGC characteristics 1 V AGCML1 V IN = 33 dbs, 1 khz dbs Microphone AGC characteristics 2 V AGCML2 V IN = 28 dbs, 1 khz dbs Microphone AGC characteristics 3 V AGCML3 V IN = 22 dbs, 1 khz dbs Microphone AGC characteristics 3 TH AGCM3 V IN = 22 dbs, 1 khz, % THD up to 5th harmonic, load = 22 kω Microphone AGC characteristics 4 V AGCM4 V IN = 4 dbs, 1 khz dbv Microphone AGC characteristics 4 TH AGCM4 V IN = 4 dbs, 1 khz, % THD up to 5th harmonic, load = 22 kω AGC-DC offset voltage VD ROM Without input, mv difference from V REF voltage PB line output characteristics: PB input Line output Line reference output level at V LOPS V IN = 12.3 dbs, 1 khz dbs Line reference output THD at TH LOPS V IN = 12.3 dbs, 1 khz, % up to 5th harmonic Line reference output noise VN OPS Without input, using A-curve filter dbs voltage at Line maximum output level at V LMAPOS f = 1 khz, load = 22 kω, dbs THD = 1% (up to 5th) Line crosstalk V SOPS1 V IN = 61 dbv, f = 1 khz, dbs Mic. input Line output using A-curve filter at PB Rec. crosstalk 1 V NOM V IN = 7.3 dbv, f = 1 khz, dbs PB input Rec. output using A-curve filter Electronic volume characteristics: PB input EVR output (AGC = off) Electronic volume maximum VE VMA V IN = 12.3 dbs, 1 khz, dbs (+10 db) gain vol. = max. (V 16 = 3.1 V) Electronic volume typical VE VTP V IN = 12.3 dbs, 1 khz, dbs (0 db) gain vol. = center (V 16 = 1.55 V) Electronic volume minimum VE VMI V IN = 12.3 dbs, 1 khz, vol. = min dbs (maximum attenuation) gain (V 16 = 0 V), using A-curve filter Playback-system characteristics (at AGC on) Playback AGC characteristics 1 VPB AGC1 V IN = 22.3 dbs, 1 khz, vol. = max dbs Playback AGC characteristics 2 VPB AGC2 V IN = 12.3 dbs, 1 khz, dbs (reference +10 db) vol. = max. Playback AGC characteristics 3 VPB AGC3 V IN = 0 dbs, 1 khz, dbs (reference db) vol. = max. Playback AGC characteristics 3 THPB AGC3 V IN = 0 dbs, 1 khz, % (reference db) THD vol. = max., 5th harmonic includes following four Product lifecycle stage. SDB00078AEB 5

6 Electrical Characteristics at V CCH = 4.9 V, V CC-SP = 4.3 V, V CC = 3.1 V, T a = 25 C (continued) Parameter Symbol Conditions Min Typ Max Unit Speaker output-system characteristics 1 (at AGC off) SP reference output level at V SPPS V IN = 14.3 dbs, 1 khz, vol. = max., dbs beep EVR = min., R L = 6 Ω SP reference output THD at TH SPPS V IN = 14.3 dbs, 1 khz, vol. = max., % beep EVR = min., R L = 6 Ω SP reference output noise voltage VN SPPS Without input, using A-curve filter, dbs at vol. = typ., beep EVR = min., R L = 6 Ω SP maximum rating output at V MSPPS f = 1 khz, vol. = max., beep EVR = mw min., R L = 6 Ω, THD = 10% SP output at power save and V PSPPS V IN = 14.3 dbs, 1 khz, vol. = max., dbs using A-curve filter, R L = 6 Ω Beep EVR characteristics 1 V BMA V IN = 15 dbs, 1 khz, dbs (at EVR = max.) vol. = min., R L = 6 Ω Beep EVR characteristics 2 V BMI V IN = 15 dbs, 1 khz, vol. = min., dbs (at EVR = min.) using A-curve filter, R L = 6 Ω Speaker output-system characteristics 2 (at AGC on) SP reference output level at V SPPS V IN = 12.3 dbs, 1 khz, vol. = max., dbs beep EVR = min., R L = 6 Ω SP reference output THD at TH SPPS V IN = 12.3 dbs, 1 khz, vol. = max., % beep EVR = min., R L = 6 Ω SP reference output noise voltage VN SPPS Without input, using A-curve filter, dbs at vol. = typ., beep EVR = min., R L = 6 Ω Mode selection hold voltage HPF off hold voltage V 39L V HPF on hold voltage V 39H V SP output on hold voltage V 47L V SP output off hold voltage V 47H V Standby on hold time V 24L V Standby off hold time V 24H V Microphone amp. on hold time V 22H V Microphone amp. off hold time V 22L V HPF on hold voltage V 20L V HPF off hold voltage V 20H V AGC on hold voltage V 18L V AGC off hold voltage V 18H V EVR mute on hold voltage V 15L V EVR mute off hold voltage V 15H V includes following four Product lifecycle stage. 6 SDB00078AEB

7 Technical Data 1. P D T a curves of LQFP048-P-0707A P D T a Power dissipation P D (mw) Glass epoxy board: 50 mm 50 mm t0.8 mm R th(j-a) = C/W Independent IC without a heat sink R th( j-a) = C/W Ambient temperature T a ( C) includes following four Product lifecycle stage. SDB00078AEB 7

8 Technical Data (continued) 2. Main Characteristics Microphone amp. gain Electronic volume control curve External resistor between pin 37 and pin 38 Electronic volume output level (dbs) Electronic volume control voltage (V) Maximum power consumption Supply voltage V CC-SP Maximum power consumption (mw) V CC = 3.1 V 200 V CCH = 4.9 V R OUT = 6 Ω 100 Temp. = 27 C AGC: off Supply voltage V CC-SP (V) Microphone amp. gain (db) kω 100 kω 82 kω 68 kω 47 kω 33 kω 22 kω 10 kω External resistor between pin 37 and pin 38 (kω) includes following four Product lifecycle stage. 8 SDB00078AEB

9 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. Any applications other than the standard applications intended. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. includes following four Product lifecycle stage.