HFBR-1505AFZ/2505AFZ (SMA Tx/Rx for SERCOS) HFBR-1515BFZ/2515BFZ (ST Tx/Rx for PROFIBUS) HFBR-1505CFZ/2505CFZ (SMA Tx/Rx for INTERBUS-S)
|
|
- Theodora Bates
- 6 years ago
- Views:
Transcription
1 HFBR-0AFZ/20AFZ (SMA Tx/Rx for SERCOS) HFBR-BFZ/2BFZ (ST Tx/Rx for PROFIBUS) HFBR-0CFZ/20CFZ (SMA Tx/Rx for INTERBUS-S) Full Metal Fiber Optic Transmitters and Receivers for SERCOS, PROFIBUS and INTERBUS-S Applications Data Sheet Description SERCOS SERCOS, an acronym for SErial Realtime COmmunications System, is a standard digital interface for communication in industrial CNC applications. SERCOS is a European (EN 9) and international standard (IEC 9). The optical interface allows data rates of 2,,, and MBd and data transfer between numerical controls and drives via fiber-optic rings, with voltage isolation and noise immunity. The HFBR-0AFZ and HFBR-20AFZ products comply with SERCOS specifications for optical characteristics and connector style, and have guaranteed performance up to 0 MBd. (MBd SERCOS device is also available, please contact Avago for more information.) PROFIBUS PROFIBUS, an acronym of PROcess FIeld BUS, is an open fieldbus standard defined for data rates ranging from 9. kbd to 2 MBd in selectable steps for wire and optical fiber. PROFIBUS is a German national DIN 92 standard and a European CENELEC standard EN 00. The ST connector is the recommended optical port of the PROFIBUS optical fiber version but other connectors are allowed as well. The HFBR-BFZ and HFBR-2BFZ comply fully to the technical guideline using Plastic Optical Fiber up to MBd, and have a guaranteed performance at data rates up to 0 MBd. Features Meets industrial SERCOS, PROFIBUS, and INTERBUS-S standard SMA and ST ports 0 nm wavelength technology Metal housing and port Specified for use with mm plastic optical fiber and 200 μm hard clad silica Auto-insertable and wave solderable DC 0 MBd data rate RoHS-compliant Applications Industrial control data links Factory automation data links Voltage isolation applications PLCs Motor drives Sensor, meter and actuator interfaces INTERBUS-S INTERBUS-S, a special open Sensor/Actuator Bus, is finding a broad acceptance in the factory automation industry. The HFBR-0CFZ and HFBR-20CFZ were specially designed for this application and can be used with mm POF and 200 μm HCS fiber at the specified data rates of 00 kbd and 2 MBd. The optical transmission guideline is a supplement of the German National DIN E 92 standard draft. On the European level, pren 02 is the draft of the INTERBUS-S fieldbus. ST is a registered trademark of AT&T. HCS is a registered trademark of OFS Corporation. Specifications and content subject to change without prior notification.
2 Package Information All HFBR-XXXFZ series transmitters and receivers are housed in a dual-in-line metal package that is high strength. The package is designed for auto-insertion and wave soldering so it is ideal for high volume production applications. Handling and Design Information When soldering, it is advisable to leave the protective cap on the unit to keep the optics clean. Good system performance requires clean port optics and cable ferrules to avoid obstructing the optical path. Clean compressed air often is sufficient to remove particles of dirt; methanol on a cotton swab also works well. Recommended Chemicals for Cleaning/Degreasing HFBR-XXXFZ Products Alcohols: methyl, isopropyl, isobutyl. Aliphatics: hexane, heptane. Other: soap solution, naphtha. Do not use partially halogenated hydrocarbons such as,, trichloroethane, ketones such as MEK, acetone, chloroform, ethyl acetate, methylene dichloride, phenol, methylene chloride or N-methylpyrolldone. Also, Avago does not recommend the use of cleaners that use halogenated hydrocarbons because of their potential environmental harm. CAUTION: The small junction size inherent in the design of these components increases the components susceptibility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of these components to prevent damage and/or degradation which may be induced by ESD. Specified Link Performance -0 C to + C unless otherwise noted. Parameter Symbol Min. Max. Unit Condition Reference Link Distance with 0. 0 m POF Notes, 2, 3,, HFBR-0AFZ/20AFZ or m HCS Notes, 2, 3,, HFBR-BFZ/2BFZ Link Distance with 0. 0 m POF Notes, 2, 3,, HFBR-0CFZ/20CFZ m HCS Notes, 2, 3,, Pulse Width Distortion PWD ns 2% to % Note with HFBR-0AFZ/20AFZ duty cycle or HFBR-BFZ/2BFZ Pulse Width Distortion PWD 2 +2 ns arbitrary duty cycle Note with HFBR-0CFZ/20CFZ Notes:. With recommended Tx and Rx circuits (0 ma nominal drive current). 2. POF HFBR-ExxyyyZ 0.23 db/m worst case attentuation. 3. HCS Worst Case Attenuation is 0dB/km (0 C to 0 C) and 2dB/km (-0 C to C).. Including a 3 db optical safety margin accounting for link service lifetime.. Including a 2 db optical safety margin accounting for link service lifetime.. Signaling rate DC to 0 MBd.. Signaling rate DC to 2 MBd. 2 Specifications and content subject to change without prior notification.
3 HFBR-XXFZ Transmitters The HFBR-XXFZ transmitter incorporates a 0 nm LED in a metal housing. The high light output power enables the use of both plastic optical fiber (POF) and Hard Clad Silica (HCS ). This transmitter can be operated up to 0 MBd using a simple driver circuit. The HFBR- 0XFZ is compatible with SMA connectors, while the HFBR-XFZ mates with ST connectors. PIN BOTTOM VIEW, HFBR-0xFZ SEE NOTE 0 FUNCTION CONNECTED TO PIN CONNECTED TO PIN NC NC CATHODE ANODE Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Reference Storage and Operating Temperature T S,O 0 C Peak Forward Input Current I F,PK 90 ma Note Average Forward Input Current I F,AVG 0 ma Reverse Input Voltage V R 3 V Lead Soldering Cycle Temp T SOL 20 C Note, 2 Time 0 s Electrical/Optical Characteristics -0 C to + C unless otherwise noted. Parameter Symbol Min. Typ. [] Max. Unit Condition Ref. Optical Power Temperature P T / T 0.02 db/ C Coefficient Forward Voltage V F V I F, dc = 0 ma Fig. Forward Voltage V F / T. mv/ C Fig. Temperature Coefficient Breakdown Voltage V BR V I F, dc = 0 μa Peak Emission Wavelength PK nm Fig. 3 Full Width Half Max FWHM 2 30 nm Fig. 3 Diode Capacitance C O 0 pf V F = 0 V, f = MHz Thermal Resistance JC 0 C/W Notes, Rise Time (0% to 90%) t r 3 ns 0% to 90%, Fall Time (90% to 0%) t f 0 ns I F = 0 ma EYE SAFETY: The HFBR-xxFZ is a Class LED Product and eye safe when used within the data sheet limits and under normal operating conditions. This includes all reasonably foreseeable single fault conditions per IEC02- and amendments. 3 Specifications and content subject to change without prior notification.
4 V F - FORWARD VOLTAGE - V P T - NORMALIZED OUTPUT POWER - db NORMALIZED SPECTRAL OUTPUT POWER Peak Output Power -0 C to + C unless otherwise noted. Model Number Symbol Min. Max. Unit Condition Reference HFBR-0AFZ SERCOS P T. 3. dbm POF, I F, dc = 0 ma Notes 2, 3,.0 0 HCS, I F, dc = 0 ma Figure 2 HFBR-BFZ PROFIBUS. 3. POF, I F, dc = 0 ma Notes 2, 3,.0. HCS, I F, dc = 0 ma Figure 2 HFBR-0CFZ INTERBUS-S POF, I F, dc = 0 ma Notes 3,, 9.9. HCS, I F, dc = 0 ma Figure 2 Notes:. Typical data at 2 C. 2. Optical power measured at the end of 0. meters of mm diameter plastic optical fiber with a large area detector. 3. Minimum and maximum values for P T over temperature are based on a fixed drive current. The recommended drive circuit has temperature compensation which reduces the variation in P T over temperature, refer to Figures and.. Thermal resistance is measured with the transmitter coupled to a connector assembly and fiber, and mounted on a printed circuit board.. To further reduce the thermal resistance, the cathode trace should be made as large as is consistent with good RF circuit design.. For I F,PK > 0 ma, the duty factor must maintain I F,AVG 0 ma and pulse width μs... mm below seating plane.. Minimum peak output power at 2 C is.3 dbm (POF) and.0 dbm (HCS ) for 0CFZ series only. 9. Optical power measured at the end of meter of mm diameter plastic or 200 μm hard clad silica optical fiber with a large area detector. 0. Pins and are for mounting and retaining purposes, but are electrically connected; pins and are electrically isolated. It is recommended that pins,,, and all be connected to ground to reduce coupling of electrical noise.. Output power with 200 μm hard clad silica optical fiber assumes a typical 0. db difference compared to mm plastic optical fiber. 2. Moisture sensitivity level (MSL) is C 0 C 2 C 0 C C 2 C C C 0 C 2 C 0 C C. C I F,DO - TRANSMITTER DRIVE CURRENT - ma Figure. Typical forward voltage vs. drive current I F,DO - TRANSMITTER DRIVE CURRENT - ma Figure 2. Typical normalized optical power vs. drive current WAVELENGTH Ð nm Figure 3. Typical normalized optical spectra Specifications and content subject to change without prior notification.
5 Recommended Drive Circuit for HFBR-x0AFZ/xBFZ TTL COMPATIBLE TRANSMITTER TTL COMPATIBLE RECEIVER + V V CC C 0 µf + C2 0. µf R U2 U3 HFBR-XXFZ HFBR-2XXFZ R2 2. C 0. µf + V V CC 0 V TTL OUTPUT 2 DS U 3 TTL INPUT 0 V R I F 0 ma Figure. Recommended transmitter and receiver drive circuit (I F, on = 0 ma nominal at T A = 2 C) Specifications and content subject to change without prior notification.
6 HFBR-2xAFZ/BFZ Receivers The HFBR-2xAFZ/BFZ receiver consists of a silicon PIN photodiode and digitizing IC to produce a logic compatible output. The IC includes a unique circuit to correct the pulse width distortion of the first bit after a long idle period. This enables operation from DC to 0 MBd with low PWD for arbitrary data patterns. The receiver output is a push pull stage compatible with TTL and CMOS logic. The HFBR-20AFZ is compatible with SMA connectors, while the HFBR-2BFZ mates with ST connectors. PIN BOTTOM VIEW, HFBR-20AFZ/BFZ SEE NOTE FUNCTION CONNECTED TO PIN CONNECTED TO PIN NO CONNECT V CC GND V O Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Reference Storage and Operating Temperature T S 0 C Supply Voltage V CC V Average Output Current I O,AVG + ma Output Power Dissipation P OD 0 mw Lead Soldering Cycle Temp 20 C Note 2, Time 0 s Electrical/Optical Characteristics -0 C to + C,. V < V CC <.2 V, V P P Noise 00 mv unless otherwise noted Parameter Symbol Min. Typ. [] Max. Unit Condition Ref. Peak Input Power Level P RH 2 dbm mm POF Notes 3, Logic HIGH 200 μm HCS Peak Input Power Level P RL 20 dbm mm POF, Note 3 Logic LOW μm HCS Figs.,, PWD < 30 ns 9, 0 Supply Current I CC 9 ma V O = Open High Level Output V OH.2. V I O = 0 μa Voltage Low Level Output Voltage V OH V I O = +. ma Output Rise Time t r 2 30 ns C L = 0 pf Note 3 Output Fall Time t f 0 30 ns CL = 0 pf Note 3 Notes:. Typical data are at 2 C, V CC =.0 V. 2.. mm below seating plane. 3. In recommended receiver circuit, with an optical signal from the recommended transmitter circuit.. Pins and are electrically connected to the metal housing and are also used for mounting and retaining purposes. It is required that pin and be connected to ground to maintain metal housing shield effectiveness.. BER 0E-9, includes a 0. db margin below the receiver switching threshold level (signal to noise ratio = 2).. Moisture sensitivity level (MSL) is 3. Specifications and content subject to change without prior notification.
7 RECEIVER PWD - ns P RL - RECEIVER OPTICAL INPUT POWER - dbm Figure. Typical POF receiver pulse width distortion vs. optical power at 0 MBd PWD - ns V CC - VOLTS Figure. Typical POF receiver pulse width distortion vs. power supply voltage at high optical power, (0 dbm, 0 MBd) PWD - ns V CC - VOLTS Figure. Typical POF receiver pulse width distortion vs. power supply voltage at mid optical power, (- dbm, 0 MBd) HFBR-20CFZ Receiver The HFBR-20CFZ receiver includes a monolithic DC coupled, digital IC receiver with open collector Schottky output transistor. An internal pullup resistor to V CC is available at pin. The optical port is compatible with SMA connectors. The specified signal rate of HFBR-20CFZ is 2 MBd. BOTTOM VIEW, HFBR 20CFZ SEE NOTE 3 PIN FUNCTION CONNECTED TO PIN CONNECTED TO PIN R L V CC GND V O Absolute Maximum Ratings Parameter Symbol Min. Max. Units Reference Storage & Operating Temperatures T S, O 0 + C Lead Soldering Cycle Temp. 20 C Note, Time 0 sec Supply Voltage V CC 0. V Note 2 Output Collector Current I OAV 2 ma Output Collector Power Dissipation P OD 0 mw Output Voltage V O 0. V Pull-up Voltage V P V CC V Fan Out (TTL) N Notes:.. mm below seating plane. 2. It is essential that a bypass capacitor 0. μf be connected from pin to pin of the receiver. Total lead length between both ends of the capacitor and the pins should not exceed 20 mm. 3. Pins and are electrically connected to the metal housing and are also used for mounting and retaining purposes. It is required that pin and be connected to ground to maintain metal housing shield effectiveness.. Moisture sensitivity level (MSL) is 3. Specifications and content subject to change without prior notification.
8 Receiver Electrical/Optical Characteristics -0 C to + C,. V V CC.2 V unless otherwise specified Parameter Symbol Min. Typ. Max. Units Conditions Ref. Input Optical Power Level P R(L) dbm V OL = 0. V, I OL = ma Notes, 2 for Logic 0 mm POF 23.0 V OL = 0. V, I OL = ma 200 μm HCS Input Optical Power Level P R(H) 3 dbm V OL =.2 V Note for Logic I OH 20 μa High Level Output Current I OH 20 μa V O = V, P R = 0 Note 3 Low Level Output Current V OL V I OL = ma, P R = P R(L)MIN Note 3 High Level Supply Current I CCH 3.. ma V CC =.2 V, P R = 0 Note 3 Low Level Supply Current I CCL.2 0. ma V CC =.2 V, P R = -2. dbm Note 3 Effective Diameter D mm Numerical Aperture NA 0. Internal Pull-up Resistor R L Ω Notes:. Optical flux, P (dbm) = 0 Log [P (μw)/000 μw]. 2. Measured at the end of the fiber optic cable with large area detector. 3. R L is open. TTL COMPATIBLE TRANSMITTER TTL COMPATIBLE RECEIVER + V V CC C 0 µf + I F R = (V CC - V F ) /I F R C2 0. µf V F C 0. µf + V V CC 0 V HFBR-0CFZ HFBR-20CFZ TTL OUTPUT 2 DS U 3 TTL INPUT 0 V R I F 2. Ω 3 ma Ω 0 ma Figure. Typical interface circuit Specifications and content subject to change without prior notification.
9 Mechanical Dimensions HFBR-X0XFZ 9 Specifications and content subject to change without prior notification.
10 Mechanical Dimensions (Cont.) HFBR-XXFZ For product information and a complete list of distributors, please go to our website: Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries. Data subject to change. Copyright Avago Technologies. All rights reserved. AV02-3EN - November, 20 Specifications and content subject to change without prior notification.
Data Sheet HFBR-1506AFZ/HFBR-2506AFZ. Full Metal Fiber Optic SMA Transmitters and Receivers for 16 MBd SERCOS Applications. Description.
HFBR-0AFZ/HFBR-20AFZ Full Metal Fiber Optic SMA Transmitters and Receivers for MBd SERCOS Applications Data Sheet Description SERCOS, an acronym for SErial Realtime COmmunications Systems, is a standard
More informationData Sheet. HFBR-1506AMZ/HFBR-2506AMZ Fiber Optic SMA Transmitters and Receivers for 16 MBd SERCOS Applications. Description. Features.
HFBR-0AMZ/HFBR-20AMZ Fiber Optic SMA Transmitters and Receivers for MBd SERCOS Applications Data Sheet Description SERCOS, an acronym for SErial Realtime COmmunications Systems, is a standard digital interface
More informationHFBR-1505AZ/2505AZ (SMA
HFBR-0AZ/20AZ (SMA Tx/Rx for SERCOS) HFBR-BZ/2BZ (ST Tx/Rx for PROFIBUS) HFBR-0CZ/20CZ (SMA Tx/Rx for INTERBUS-S) Fiber Optic Transmitters and Receivers for SERCOS, PROFIBUS and INTERBUS-S Applications
More informationFiber Optic Transmitters and Receivers for SERCOS, PROFIBUS and INTERBUS-S Applications. Technical Data
Fiber Optic Transmitters and Receivers for SERCOS, PROFIBUS and INTERBUS-S Applications Technical Data HFBR-0A/20A (SMA Tx/Rx for SERCOS) HFBR-B/2B (ST Tx/Rx for PROFIBUS) HFBR-0C/20C (SMA Tx/Rx for INTERBUS-S)
More informationAFBR-1555ARZ, AFBR-2555ARZ (SMA Tx/Rx for SERCOS)
Reinforced Metal Fiber Optic Transmitter and Receiver for SERCOS Applications Description SERCOS The Serial Realtime Communications System (SERCOS) is a standard digital interface for communication in
More informationFeatures. Applications
HFBR-8 Series HFBR-8 Transmitter HFBR-8 Receiver Megabaud Versatile Link Fiber Optic Transmitter and Receiver for mm POF and µm HCS Data Sheet Description The HFBR-8 Series consists of a fiber-optic transmitter
More information12 Megabaud Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 μm HCS. Features. Applications
HFBR-EZ Transmitter HFBR-EZ Receiver Megabaud Versatile Link Fiber Optic Transmitter and Receiver for mm POF and μm HCS Data Sheet Description The HFBR-EZ transmitter is an LED in a low cost plastic housing
More informationThe HFBR-1604 is a selected version of the HFBR-1602, with power specified to meet the
SERCOS Fiber Optic Transmitters and Receiver Technical Data HFBR-0600 Series Features Fully Compliant to SERCOS Optical Specifications Optimized for 1 mm Plastic Optical Fiber Compatible with SMA Connectors
More informationIsolation in Test and Measurement Instruments Error Free Signalling for Industrial and Manufacturing
Versatile Link The Versatile Fiber Optic Connection Technical Data HFBR-0501 Series Features Low Cost Fiber Optic Components Enhanced Digital Links dc-5 MBd Extended Distance Links up to 120 m at 40 kbd
More informationData Sheet. HFBR-0500Z Series Versatile Link The Versatile Fiber Optic Connection. Description. Features. Applications
HFBR-0500Z Series Versatile Link The Versatile Fiber Optic Connection Data Sheet Description The Versatile Link series is a complete family of fiber optic link components for applications requiring a low
More informationData Sheet. HFBR-0500ETZ Series Versatile Link The Versatile Fiber Optic Connection. Description. Features. Applications
HFBR-0500ETZ Series Versatile Link The Versatile Fiber Optic Connection Data Sheet Description The Versatile Link series is a complete family of fiber optic link components for applications requiring a
More informationData Sheet. HFBR-0300Z Series HFBR-1312TZ Transmitter HFBR-2316TZ Receiver nm Fiber Optic Transmitter and Receiver. Features.
HFBR-000Z Series HFBR-TZ Transmitter HFBR-TZ Receiver 00 nm Fiber Optic Transmitter and Receiver Data Sheet Description The HFBR-000Z Series is designed to provide the most cost-effective 00 nm fiber optic
More informationAFBR-1528CZ and AFBR-2528CZ
DC to 10-MBd Versatile Link Fiber Optic Analog Transmitter and Digital Receiver for 1-mm POF and 200-μm PCS Description The AFBR-1528CZ analog transmitter utilizes a 650-nm LED source, and the AFBR-2528CZ
More informationData Sheet. HFBR-1312TZ Transmitter HFBR-2316TZ Receiver nm Fiber Optic Transmitter and Receiver. Description. Features.
HFBR-11TZ Transmitter HFBR-1TZ Receiver 100 nm Fiber Optic Transmitter and Receiver Data Sheet Description The HFBR-11TZ Transmitter and HFBR-1TZ Receiver are designed to provide the most cost-effective
More informationData Sheet. AFBR-3950xxRZ High Voltage Galvanic Insulation Link for DC to 50MBaud. Features. Description. Applications. Ordering Information
AFBR-3950xxRZ High Voltage Galvanic Insulation Link for DC to 50MBaud Data Sheet Description Avago Technolgies AFBR-3950xxRZ is a high voltage galvanic insulation link for DC to 50 MBaud. The AFBR- 3950xxRZ
More informationData Sheet AFBR-2419MZ. 50 MBd Miniature Link Fiber Optic Receiver. Description. Features. Applications. AFBR-24x9xZ Available Part Numbers
AFBR-2x9xZ 0 MBd Miniature Link Fiber Optic Receiver Data Sheet Description The AFBR-2x9Z series components provide cost effective, high performance fiber optic communication links for information systems
More informationFT10MHNR FT10MVNR. 650 nm DC 10 MBd RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT10MHNR FT10MVNR 650 nm DC 10 MBd RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION The Firecomms DC to 10 MBd RedLink transmitter is based on the highly reliable Firecomms designed Resonant Cavity
More informationData Sheet. HFBR-1312T Transmitter HFBR-2316T Receiver 1300 nm Fiber Optic Transmitter and Receiver. Description. Features. Applications.
HFBR-11T Transmitter HFBR-1T Receiver 100 nm Fiber Optic Transmitter and Receiver Data Sheet Description The HFBR-000 Series is designed to provide the most cost-effective 100 nm fiber optic links for
More informationData Sheet AFBR-2418MZ. DC-50MBd Miniature Link Fiber Optic Receiver. Description. Features. Applications. AFBR-24x8xZ Available Part Numbers
AFBR-2xxZ DC-0MBd Miniature Link Fiber Optic Receiver Data Sheet Description The component is designed to provide cost effective, high performance fiber optic communication links for information systems
More informationData Sheet. AFBR-16xxZ and AFBR-26x4Z/25x9Z DC-50MBd Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 µm PCS.
AFBR-16xxZ and AFBR-26x4Z/25x9Z DC-50MBd Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 µm PCS Data Sheet Description The AFBR-16xxZ transmitter utilizes a 650 nm LED source with
More informationDC-5 MBd RedLink Transmitter and Receiver Pair
DC-5 MBd RedLink Transmitter and Receiver Pair DATA SHEET 650 nm DC-5 MBd RedLink Fiber Optic Transmitter and Receiver FEATURES Ideal for use with POF Optimized for data transmission from DC to 5 MBd Industrial
More informationFT05MHNR FT05MVNR. 650 nm DC 5 MBd RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT05MHNR FT05MVNR 650 nm DC 5 MBd RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION The Firecomms DC to 5 MBd RedLink transmitter is based on the highly reliable Firecomms designed Resonant Cavity
More informationFT01MHNG FT01MVNG. 530 nm DC-1 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT01MHNG FT01MVNG 530 nm DC-1 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION The Firecomms DC to 1 MBd green 530 nm transmitter is designed for maximum distance at low speed communication in
More informationData Sheet. AFBR-16xxZ and AFBR-26x4Z/25x9Z DC-50MBd Versatile Link Fiber Optic Transmitter and Receiver for 1 mm POF and 200 m PCS.
AFBR-6xxZ and AFBR-6x4Z/5x9Z DC-50MBd Versatile Link Fiber Optic Transmitter and Receiver for mm POF and 00 m PCS Data Sheet Description The AFBR-6xxZ transmitter utilizes a 650 nm LED source with integrated
More informationFM10DHIR FM10DHNR FM10DVIR FM10DVNR DC 10 RedLink Fiber Optic Receiver Preliminary Data Sheet
NOT RECOMMENDED FOR NEW DESIGNS * For new designs please see part numbers: FR10DHIR FR10DHNR FR10DVIR FR10DVNR FM10DHIR FM10DHNR FM10DVIR FM10DVNR DC 10 RedLink Fiber Optic Receiver Preliminary Data Sheet
More informationFR10DxxR. DC-10 RedLink Fiber Optic Receiver Datasheet DESCRIPTION FEATURES AVAILABLE OPTIONS APPLICATIONS
FR10DxxR DC-10 RedLink Fiber Optic Receiver Datasheet DESCRIPTION The Firecomms DC-10 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package
More informationFR50MxxR. DC-50 RedLink Fiber Optic Receiver Datasheet DESCRIPTION FEATURES AVAILABLE OPTIONS APPLICATIONS
FR50MxxR DC-50 RedLink Fiber Optic Receiver Datasheet DESCRIPTION The Firecomms DC-50 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package
More informationFR10DxxR. DC-10 RedLink Fiber Optic Receiver Datasheet DESCRIPTION FEATURES AVAILABLE OPTIONS APPLICATIONS
FR10DxxR DC-10 RedLink Fiber Optic Receiver Datasheet DESCRIPTION The Firecomms DC-10 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package
More informationDistributed by: www.jameco.com -800-83-22 The content and copyrights of the attached material are the property of its owner. 25 Megabaud Versatile Link The Versatile Fiber Optic Connection Technical Data
More informationFT10MHLR FT10MVLR. 650 nm DC-10 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT10MHLR FT10MVLR 650 nm DC-10 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION The Firecomms DC to 10 MBd low current RedLink transmitter is a highly reliable Resonant Cavity Light Emitting Diode
More informationFT05MxNR. 650 nm DC-5 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FT05MxNR 650 nm DC-5 MBd RedLink Fiber Optic Transmitter Datasheet DESCRIPTION The Firecomms DC to 5 MBd RedLink transmitter is based on the highly reliable Firecomms designed Resonant Cavity Light Emitting
More informationFR50MxxR DC-50 RedLink Fiber Optic Receiver Datasheet
FR50MxxR DC-50 RedLink Fiber Optic Receiver Datasheet DESCRIPTION The Firecomms DC-50 MBd RedLink receiver is a fully integrated photodiode and receiver IC. The receiver is housed in a miniature package
More informationDC-10 MBd RedLink Transmitter and Receiver Pair
DC-0 MBd RedLink Transmitter and Receiver Pair DATA SHEET 650 nm DC-0 MBd RedLink Fiber Optic Transmitter and Receiver FEATURES Ideal for use with POF and PCS fiber Optimized for data transmission from
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. HFBR-0400 Series HFBR-14xx Transmitters HFBR-24xx Receivers Low Cost, Miniature
More informationFR05DHCR FR05DVCR. DC-5 MBd Open Collector Dual Supply Voltage RedLink Receiver Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FR05DHCR FR05DVCR DC-5 MBd Open Collector Dual Supply Voltage RedLink Receiver Datasheet DESCRIPTION The Firecomms DC to 5 MBd Dual supply voltage RedLink receiver is based on a fully integrated photo-diode
More informationFeatures. Applications. Truth Table (Positive Logic) LED ENABLE OUTPUT
ACNVE mm DTI, MBd Digital Optocoupler Data Sheet Description The new ACNVE is an optically coupled gate that combines a AlGaAs light emitting diode and an integrated photo detector housed in a widebody
More informationData Sheet. HFBR-14xxZ and HFBR-24xxZ Series Low-Cost, 820 nm Miniature Link Fiber Optic Components with ST, SMA, SC and FC Ports.
HFBR-14xxZ and HFBR-4xxZ Series Low-Cost, 80 nm Miniature Link Fiber Optic Components with ST, SMA, SC and FC Ports Data Sheet Description The 80 nm Miniature Link Series of components is designed to provide
More informationRECEIVER. Package Options. Transmitter (TX) PLD-1315TM PLD-1315M. Receiver (RX) PLD-23XXTM PLD-23XXM
PLD- and PLD-XX Series Long wavelength Single-mode Fiber Optic TX & RX Modules Product Data Sheet FEATURES, RX InGaAs photodiode w/ integrated TIA, 0nm operation Up to 0 Mb/s differential signal output
More informationFM05DHIR FM05DVIR DC 5 MBd Dual Supply Voltage RedLink Receiver Preliminary Data Sheet
NOT RECOMMENDED FOR NEW DESIGNS * For new designs please see part numbers: FR05DHIR FR05DVIR FM05DHIR FM05DVIR DC 5 MBd Dual Supply Voltage RedLink Receiver Preliminary Data Sheet DESCRIPTION The Firecomms
More informationFT50MHNR FT50MHIR FT50MVNR FT50MVIR 650 nm DC 50 MBd Fully Integrated RedLink Fiber Optic Transmitter Data Sheet
FT50MHNR FT50MHIR FT50MVNR FT50MVIR 650 nm DC 50 MBd Fully Integrated RedLink Fiber Optic Transmitter Data Sheet DESCRIPTION The Firecomms DC 50 MBd RedLink transmitter consists of a highly reliable Resonant
More informationFT50MxxR 650 nm DC-50 MBd Fully Integrated RedLink Fiber Optic Transmitter Datasheet
FT50MxxR 650 nm DC-50 MBd Fully Integrated RedLink Fiber Optic Transmitter Datasheet DESCRIPTION The Firecomms DC-50 MBd RedLink transmitter consists of a highly reliable Resonant Cavity Light Emitting
More informationFR05DHIR FR05DVIR. DC-5 MBd Dual Supply Voltage RedLink Receiver Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FR05DHIR FR05DVIR DC-5 MBd Dual Supply Voltage RedLink Receiver Datasheet DESCRIPTION The Firecomms DC to 5 MBd Dual supply voltage RedLink receiver is based on a fully integrated photo-diode with TIA
More informationFiber Optic Receiver. OPF520 Series. OPF520 Series
Low Cost plastic cap package Designed to self align in the bore of standard fiber optic receptacles Press fit simplifies installation Optimized for fiber optic applications using 50 to 200 micron fiber
More informationHFD Mbit Direct Coupled Receiver
FEATURES Converts fiber optic input signals to TTL digital outputs Typical sensitivity 2 µw (-27 dbm) Single 5 V supply requirement Direct coupled receiver circuit Open collector output Microlens optics
More informationFR05DxIR. DC-5 MBd Dual Supply Voltage RedLink Receiver Datasheet DESCRIPTION FEATURES APPLICATIONS AVAILABLE OPTIONS
FR05DxIR DC-5 MBd Dual Supply Voltage RedLink Receiver Datasheet DESCRIPTION The Firecomms DC to 5 MBd Dual supply voltage RedLink receiver is based on a fully integrated photo-diode with TIA and limiting
More informationData Sheet. AFBR-S10TR001Z Compact 650 nm Analog Transceiver with Compact Versatile-Link Connector for Sensing Over POF. Description.
AFBR-STRZ Compact 65 nm Analog Transceiver with Compact Versatile-Link Connector for Sensing Over POF Data Sheet Description Avago Technologies' AFBR-STRZ transceiver provides system designers with the
More informationFM20VHIR FM20VVIR. RedLink Fiber Optic Receiver for Direct High Voltage Switching Preliminary Data Sheet DESCRIPTION FEATURES APPLICATIONS
FM0VHIR FM0VVIR RedLink Fiber Optic Receiver for Direct High Voltage Switching Preliminary Data Sheet DESCRIPTION This Firecomms RedLink receiver is based on a fully integrated photodiode with TIA, limiting
More informationRoHS compliant 1310 nm multi-mode Transceiver (2 km) 1x9, SC Duplex Connector, 5.0 V 155 Mbps ATM/ Fast Ethernet
Features RoHS compliant Industry standard 1 9 footprint SC duplex connector Single power supply 5.0 V Differential LVPECL inputs and outputs Compatible with solder and aqueous wash processes Class 1 laser
More informationData Sheet. HFBR-0400Z, HFBR-14xxZ and HFBR-24xxZ Series. Low Cost, Miniature Fiber Optic Components with ST, SMA, SC and FC Ports.
HFBR-0400Z, HFBR-14xxZ and HFBR-4xxZ Series Low Cost, Miniature Fiber Optic Components with ST, SMA, SC and FC Ports Data Sheet Description The HFBR-0400Z Series of components is designed to provide cost
More informationHFBR-14xxZ and HFBR-24xxZ Series
Low-Cost, 80 nm Miniature Link Fiber Optic Components with ST, SMA, SC, and FC Ports Description The 80 nm Miniature Link Series of components is designed to provide cost-effective, high-performance fiber
More informationFR20DxIR RedLink Fiber Optic Receiver for Direct High Voltage Switching Datasheet
FR0DxIR RedLink Fiber Optic Receiver for Direct High Voltage Switching Datasheet DESCRIPTION This Firecomms RedLink receiver is based on a fully integrated photodiode with TIA, limiting amplifier and a
More informationRoHS Compliant 1310 nm Single-mode Transceiver (L1.1) 2 5, LC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet
Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (L1.1) Industry standard 2 5 footprint LC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with
More informationACNT-H50L. 1-MBd Optocoupler in 15-mm Stretched SO8 Package. Data Sheet. Description. Features. Applications. Functional Diagram
ACNT-H5L -MBd Optocoupler in 5-mm Stretched SO8 Package Description The ACNT-H5L is a single-channel -MBd optocoupler in Stretched SO8 footprint. It uses an insulating layer between the light emitting
More informationFR05DxDR RedLink Fiber Optic Receiver for Direct High Voltage Switching Datasheet
FR05DxDR RedLink Fiber Optic Receiver for Direct High Voltage Switching Datasheet DESCRIPTION This Firecomms RedLink receiver is based on a fully integrated photodiode with TIA, limiting amplifier and
More informationSchematic V F HCPL-7601/11 SHIELD. USE OF A 0.1 µf BYPASS CAPACITOR CONNECTED BETWEEN PINS 5 AND 8 IS REQUIRED (SEE NOTE 1).
CMOS/TTL Compatible, Low Input Current, High Speed, High CMR Optocoupler Technical Data HCPL-7601 HCPL-7611 Features Low Input Current Version of HCPL-2601/11 and 6N137 Wide Input Current Range: I F =
More informationRoHS compliant 1310 nm Single-mode Transceiver (S1.1, 19dB margin) 1x9, SC Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet
Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (S1.1) Industry standard 1 9 footprint SC duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with
More informationHFBR-14xxZ and HFBR-24xxZ Series
Low-Cost, 80 nm Miniature Link Fiber Optic Components with ST, SMA, SC, and FC Ports Description The 80 nm Miniature Link Series of components is designed to provide cost-effective, high-performance fiber
More informationRoHS compliant 1310 nm Single-mode Transceiver (1000BASE-LX) 2 5, LC Duplex Connector, 3.3 V Gbd Fiber Channel/1.25 Gigabit Ethernet
Features RoHS compliant Compliant with IEEE 802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard Industry standard 2 5 footprint LC duplex connector Single power supply 3.3V Compatible
More informationRoHS compliant 1310 nm Single-mode Transceiver (L1.1) 1x9, ST Duplex Connector, 3.3 V 155 Mbps ATM/SONET OC-3/SDH STM-1/Fast Ethernet.
Features Compliant with 155 Mbps ATM and SONET OC-3 SDH STM-1 (L1.1) Industry standard 1 9 footprint ST duplex connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with
More information1550 nm Single-mode Transceiver (80km) 1 9, SC Duplex Connector, 3.3 V 622 Mbps ATM/SONET OC-12/SDH STM-4
No Shield Forward Clipper Backward Clipper Features Industry standard 1 9 footprint SC duplex connector Single power supply 3.3 V Differential LVPECL data inputs and outputs LVPECL Signal Detect output
More informationACPL-M50L, ACPL-054L, ACPL-W50L and ACPL-K54L Low Power, 1MBd Digital Optocoupler. Features. Applications GND
ACPL-M5L, ACPL-5L, ACPL-W5L and ACPL-K5L Low Power, MBd Digital Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product
More informationDistributed by: www.jameco.com -8-8-22 The content and copyrights of the attached material are the property of its owner. HCPL-M, HCPL-M, HCPL-M Small Outline, Lead, High CMR, High Speed, Logic Gate Optocouplers
More informationPARAMETER SYMBOL MIN MAX UNITS NOTE
Features Industry standard 2 5 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous wash processes Class 1 laser product complies with
More informationRoHS compliant 850 nm Multi-mode Transceiver (1000BASE-SX) 1 9, SC Duplex Connector, 3.3 V/5V Gbd Fiber Channel/1.25 Gigabit Ethernet
No Shield Forward Clipper Backward Clipper Features Compliant with IEEE 802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard Industry standard 1 9 footprint SC duplex connector Single
More informationDual Channel, High Speed Optocouplers Technical Data
Dual Channel, High Speed Optocouplers Technical Data HCPL-2530 HCPL-2531 HCPL-4534 HCPL-0530 HCPL-0531 HCPL-0534 Features 15 kv/µs Minimum Common Mode Transient Immunity at V CM = 1500 V (HCPL-4534/0534)
More informationRoHS compliant 1310 nm Single-mode Transceiver (10km) 1 9, ST Duplex Connector, 3.3 V/5V Gbd Fiber Channel/1.25 Gigabit Ethernet
Features Compliant with IEEE 802.3z Gigabit Ethernet standard Compliant with Fiber Channel standard Industry standard 1 9 footprint ST duplex connector Single power supply 3.3 V/5V Differential LVPECL/PECL
More informationACNV2601. High Insulation Voltage 10-MBd Digital Optocoupler. Data Sheet. Description. Features. Applications
High Insulation Voltage -MBd Digital Optocoupler Description The ACNV26 is an optically coupled gate that combines an AlGaAs light-emitting diode and an integrated photo detector housed in a widebody package.
More informationData Sheet. Description. Features. Transmitter. Applications. Receiver. Package
AFBR-59F1Z 125MBd Compact 650 nm Transceiver for Data Communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F1Z transceiver
More informationMediSpec SMI Non-Magnetic Transceiver
The MediSpec SMI is an RCLED based 650nm solution enabling robust and reliable termination of Plastic Optical Fiber (POF) The optical transceiver is designed to provide up to 250 Mbps data communication
More informationVOLTAGE TEMPERATURE LD TYPE
Features Compliant with IEEE 802.3z Gigabit Ethernet standard Industry standard 1 9 footprint SC connector Single power supply 3.3/5.0 V Differential PECL inputs and outputs Compatible with solder and
More information4N25 Phototransistor Optocoupler General Purpose Type. Features
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
More informationHCPL-M454 Ultra High CMR, Small Outline, 5 Lead, High Speed Optocoupler. Features
HCPL-M44 Ultra High CMR, Small Outline, Lead, High Speed Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description
More informationFeatures. Description. PART NUMBER TX RX VOLTAGE TEMPERATURE KSB2-A3S-PC-N nm 1310 nm 3.3 V 0 C to 70 C
Features Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Industry standard 1 9 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous
More informationHCPL-270L/070L/273L/073L
Low Input Current, High Gain, LVTTL/LVCMOS Compatible Optocouplers Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetector to provide extremely
More informationData Sheet. AFBR-1150L / AFBR-2150L Fiber Optic Transmitter and Receiver for 150 Mbit/s MOST. Features. Description. Applications.
AFBR-1150L / AFBR-2150L Fiber Optic Transmitter and Receiver for 150 Mbit/s MOST Data Sheet Description MOST150 transmitter and receiver are designed to transmit/ receive up to 150 MBit/s optical data
More informationAFBR-59F2Z Data Sheet Description Features Applications Transmitter Receiver Package
AFBR-59F2Z 2MBd Compact 6nm Transceiver for Data communication over Polymer Optical Fiber (POF) cables with a bare fiber locking system Data Sheet Description The Avago Technologies AFBR-59F2Z transceiver
More informationPART NUMBER TX RX VOLTAGE TEMPERATURE. LSB2-A3M-PC-N nm 1310 nm 3.3 V 0 C to 70 C LSB2-A3M-PI-N nm 1310 nm 3.
Features Compatible with 155 Mbps ATM and SONET OC-3 SDH STM-1 Industry standard 1 9 footprint SC Connector Single power supply 3.3 V Differential PECL inputs and outputs Compatible with solder and aqueous
More informationEuropean Connectorized Receivers
European Connectorized Receivers Honeywell receiver components are available in the following connector styles. Each style has a three-digit reference used in the order guides. SMA SINGLE HOLE MOUNTING
More informationAC/DC to Logic Interface Optocouplers Technical Data
H AC/DC to Logic Interface Optocouplers Technical Data HCPL-37 HCPL-376 Features Standard (HCPL-37) and Low Input Current (HCPL-376) Versions AC or DC Input Programmable Sense Voltage Hysteresis Logic
More informationDual Channel, High Speed Optocouplers Technical Data
Dual Channel, High Speed Optocouplers Technical Data HCPL-5 HCPL-5 HCPL-454 HCPL-5 HCPL-5 HCPL-54 Features 5 kv/µs Minimum Common Mode Transient Immunity at V CM = 5 V (HCPL-454/54) High Speed: Mb/s TTL
More informationFiber Optic LAN Components VF45 Quad Transceiver for 10Mb/s and 100Mb/s Ethernet
FEATURES Key component for making a fiber optic Ethernet truly scalable and switchable from 10 to 100Mb/s Ethernet. Innovative NEW interconnect is cost competitive with copper solutions, thus enabling
More informationFIBER105.TIF OUTLINE DIMENSIONS in inches (mm) .176 (4.47).165 (4.19) .500 MIN (12.7) FIBER203.DIM. Pinout 1. Capacitor 2. VÙÙ 3.
FEATURES Converts fiber optic input signals to TTL digital outputs Typical sensitivity 500 nw peak ( 33 dbm) Single 5 V supply requirement Edge detection circuitry gives 20 db minimum dynamic range, low
More informationRoHS Compliant TX-1310/RX-1550 nm Single-mode Bi-directional 2
Features Compliant with IEEE 802.3z Gigabit Ethernet Industry standard 2 5 footprint SC connector Single power supply 3.3 V Differential LVPECL inputs and outputs Compatible with solder and aqueous wash
More informationDC 50 FEATURES APPLICATIONS. Emitting a visible (POF). range of. MBd. with +/ 10 % RCLED in. Ultra low. width distortion. Table 1.
FE50MKIR FE50MKNR DC 50 Fiber Optic OptoLock Transceiver Preliminary Data Sheet DESCRIPTION The Firecomms DC 50 MBd OptoLock transceiver consists of a highly reliable Resonant Cavity Light Emitting Diode
More informationACNV4506 Intelligent Power Module and Gate Drive Interface Optocouplers. Features. Specifications. Applications
ACNV0 Intelligent Power Module and Gate Drive Interface Optocouplers Data Sheet Description The ACNV0 device contains a GaAsP LED optically coupled to an integrated high gain photo detector. Minimized
More informationACPL-P480 and ACPL-W480
High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Description The high-speed ACPL-P48/W48 optocoupler contains a GaAsP LED, a photo detector, and a Schmitt trigger that eliminates
More informationFeatures. Applications OFF
HCPL Power Bipolar Transistor Base Drive Optocoupler Data Sheet Description The HCPL consists of a Silicondoped GaAs LED optically coupled to an integrated circuit with a power output stage. This optocoupler
More informationACPL-K49T. Data Sheet
Data Sheet ACPL-K9T Wide Operating Temperature Automotive R Coupler 0-kBd Digital Optocoupler Configurable as Low-Power, Low-Leakage Phototransistor Description The ACPL-K9T is a single-channel, hightemperature,
More informationFeatures. PART NUMBER TX RX IN/OUT SD Burst Control RX 1550nm Input TEMPERATURE LD TYPE
Features Compliant with IEEE 802.3ah 1000BASE-PX10 Industry standard 2 5 footprint SC connector Single power supply 3.3 V Differential LVPECL inputs and outputs Transmitter burst mode and Receiver continuous
More informationData Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Features
HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8
More informationHFD3029. Schmitt Input, Non-Inverting TTL Output Receiver
FEATURES Converts fiber optic input signals to TTL totem pole outputs Sensitivity is 1.5 µw peak (-28.2 dbm) Single 5 V supply requirement Schmitt circuitry gives 17 db dynamic range and low Pulse Width
More informationHIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS
HIGH SPEED- MBit/s DESCRIPTION The, /6 single-channel and /6 dual-channel optocouplers consist of a 5 nm AlGaAS LED, optically coupled to a very high speed integrated photodetector logic gate with a strobable
More informationSFH551/1-1 and SFH551/1-1V Receiver with Digital Output Stage for Polymer Optical Fiber Applications. Data Sheet. Description.
and V Receiver with Digital Output Stage for Polymer Optical Fiber Applicatio Data Sheet Description The receiver is a traimpedance amplifier with an integrated photodiode and TTL open-collector output
More informationData Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Description
HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8
More informationLTV-063L LVTTL/LVCMOS Compatible 3.3V Dual-Channel Optocouplers (10 Mb/s)
LTV-063L LVTTL/LVCMOS Compatible 3.3V Dual-Channel Optocouplers (10 Mb/s) Description The LTV-063L consists of a high efficient AlGaAs Light Emitting Diode and a high speed optical detector. This design
More informationHigh CMR Intelligent Power Module and Gate Drive Interface Optocoupler. Features. Specifications. Applications
ACPL-P80 and ACPL-W80 High CMR Intelligent Power Module and Gate Drive Interface Optocoupler Data Sheet Lead (Pb) Free RoHS fully compliant RoHS fully compliant options available; -xxxe denotes a lead-free
More informationHFD /XXX. h 479. Schmitt Input, Non-Inverting TTL Output Receiver
FEATURES Converts fiber optic input signals to TTL totem pole outputs Maximum sensitivity 1.5 µw peak (-28.2 dbm) Wide variety of cable options, operates with 50/125, 62.5/125, and 100/140 µm cables Schmitt
More informationAgilent HCPL-0738 High Speed CMOS Optocoupler
Agilent HCPL-078 High Speed CMOS Optocoupler Data Sheet Description The HCPL-078 is a dual-channel 1 MBd CMOS optocoupler in SOIC-8 package. The HCPL-078 optocoupler utilizes the latest CMOS IC technology
More informationWide Operating Temperature Automotive Digital Optocoupler with R 2 Coupler Isolation and 5-Pin SMT Package. Features. Applications ANODE
ACPL-MT Wide Operating Temperature Automotive Digital Optocoupler with R 2 Coupler Isolation and -Pin SMT Package Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available;
More informationHCPL-576x* AC/DC to Logic Interface Hermetically Sealed Optocouplers
HCPL-576x* 5962-8947701 AC/DC to Logic Interface Hermetically Sealed Optocouplers Data Sheet Description These devices are single channel, hermetically sealed, voltage/current threshold detection optocouplers.
More information