Professional Provider of Power Testing Instrument PCT200 Series CT/PT Test System
|
|
- Junior Fox
- 6 years ago
- Views:
Transcription
1 Professional Provider of Power Testing Instrument PCT200 Series CT/PT Test System TP YCT Bushing type CT PT Bushing Type CT M type CT GIS CT PT PONOO POWER CO., LTD. No.139 Jinghai Third Road, BD, Beijing, China Tel : +86 (10) Fax : +86 (10) PONOO POWER CO., LTD
2 o l t a g e Principle Excitation characteristics test based on DC method Ratio test based on voltage method Features: 1. Test CT according to IEC /6. IEC and NSI/IEEE C Can test all types of CT 3. One test can get all CT parameters 4. Fast test for excitation check 10k knee point check time: 50s 1k knee point check time: 15s 5. PT test Ratio Polarity Excitation Burden <Conventional method> s <New method> ariable- Frequencyv power source T1 T2 Tx v Tx Features of new method: Cancheck CT with high knee point value Highefficiency, high accuracy, more safe <Conventional method> Current source Current source is at primary side and current measurement is at the secondary side <New method> ol ta ge s o ur ce oltage source is at secondary side and oltage measurement is at primary side Features of new method: Ratiocheck up to 30000:1 Cancheck bushing CT Cancheck GIS CT Error check with extrapolation method for M type CT Test special CT P1 P2 S1 S2 Load Current source L2 Standard CT L1 P1 CT under test P2 K2 K 1 S1 S2 CT Tester Load s o ur ce Getthe ratio error and angle error based on extrapolation method, no need to use extra standard CT nor standard load. Bushing type CT requires large power output capacity which conventional CT tester can not give. New test method can solve this problem Theprimary side length is long for GIS type CT and this r e q u i r e s l a r g e p o w e r o u t p u t c a p a c i t y w h i c h conventional CT test can not supply. New test method can solve this problem 01 02
3 Test at field Test Report Simple wiring PCT200i Report PCT series report analyze software P1 S1 Load S2 P2 Standard ccessories Soft bag Test leads SoftwareInterface Signal Cable(Double wired) 2.5mm2 3m 2 PCT200i operation TransportationCase Signal Cable Double wired 0.75mm2 15m 1 (ntiwater&vibration) Earthing Lead with Clap 4mm2 3m 1 Excelformat test report 4size Testresult can be exported to key drive through USB port. Cansave results in non-volatile memory 03 Claps with Jaws open 30mm 4 Spike Test Pen 2 Cable Connector 2 Claps with Jaws open 10mm 4 04
4 Comparison with traditional method Shan Xi CT/PT Research Institute Field Test Examples Customer: Beijing High Transmission Company Comparison of excitation tests between conventional test method and PCT200i 500k TPY(transient) type CT Test data Report Comparison with traditional test method Test results Chongqing Power Plant Generator Output CT C omparison test with traditional CT test method was made in Shan Xi CT & PT Research Institute. 0.2 class reference CT was used in the test. The results show the maximum Ratio test difference is % and the maximum Phase deviation test difference is Generator output 6000:1 Test Result 05 06
5 Szechwan Substation (500k) Tianjing Huapanshan Power Plant 500k Tranformer Bushing CT Shan Xi 500k Substation 220k Transmission Line CT 500k ClassCT TPY 4000:1 Test result 500k Transformer Casing CT TPY Class Shen yang CT/PT factory TPY Class 1250:1test Datasheet Shen yang CT/PT factory 220k Transmission line GIS CT P Class 1250:1 excitation characteristic curve Generator Output TPY CT 200 k transmission line GIS CT Class P 1500:1 Test result 07 08
6 PCT200 Series CT/PT Test System Specifications pplication Output voltage range Specifications Output current range Output power Ratio test range Ratio test accuracy Max. knee point voltage Burden test range Burden test accuracy Winding resistance test rang CT Winding resistance test accuracy Test M/P/TP type CT and PT Test M/P/TP type CT and PT 0~120 0~120 0~5rms(15 peak) 0~5rms(15 peak) ~500rms(1500 peak) ~500rms(1500 peak) 35000:1~45000: :1~45000:5 ±0.1% ±0.05% Ω ±0.05%±1mΩ Typ ~1000Ω ±0.05%±1mΩ Typ Ω ±0.1%±1mΩ Gur. ±0.05%±1mΩ Typ. ±0.1%±1mΩ Gur ~1000Ω ±0.1%±1mΩ Gur. ±0.05%±1mΩ Typ. ±0.1%±1mΩ Gur. Instrument security factor (FS) Remanence flux (Kr) Secondary time constant (Ts) Unsaturated inductance (Lu) Saturated inductance (Ls) Excitation characteristic curve 10%(5%)error curve Rated symmetrical short circuit current factor (Kssc) ccuracy limiting voltage (Eal) Transient dimensioning factor (Ktd) Peak instantaneous error (ε^ ) Composite error (εc ) Phase displacement Others PCT200i ccuracy limiting factor (LF) Ratio error PT PCT200i ±0.05%Typ. ±0.1%Gur. ±0.02% Typ. ±0.05% Gur. 1min Typ. 3min Gur. 0.1min 1min Typ. 2min Gur. Ratio Polarity Excitation characteristic ac/50-60Hz (norminal) ac/45-65Hz (permissible) ac/50-60Hz (norminal) ac/45-65Hz (permissible) Main supply Operation temperature Relative humidity Dimensions Weight LCT display Operating system -10 С~50 С 0.01min -10 С~50 С 90%,non-condensing 90%,non-condensing 470 x200 x 245mm (W H L 470 x200 x 245mm (W H L 10Kg 8.4 inch, color display windows 09 14Kg 8.4 inch, color display windows 10
PCT200 SERIES CT/PT TEST SYSTEM USER MANUAL
PONOVO POWER CO., LTD 2F, 4Cell, Tower C, In.Do Mansion No.48A Zhichun Road, Haidian District Beijing, China (Post Code 100098) TEL. +86 (10) 82755151 ext. 8887 Office FAX +86 (10) 82755257 E-Mail Info@ponovo.com.cn
More informationPCT200 Series User Manual
PONOVO POWER CO., LTD No. 139 Jinghai Third Road, BDA, Beijing, China, 100176 Office TEL. +86 (10) 59089666 E-Mail Website Info@relaytest.com www.relaytest.com / www.ponovo.com.cn PCT200 Series User Manual
More informationHYVA404 CTPT Analyzer instruction manual (V1.3.19) CT/PT Analyzer. User Manual (V1.3.19)
CT/PT Analyzer User Manual (V1.3.19) Content Warning...3 1 Application and Technical Index of CT/PT Analyzer... 4 1.1 Application... 4 1.2 CT Technical Index... 4 2 Hardware... 6 2.1 Introduction... 6
More informationCT Analyzer instruction manual (V1.0.5)
Warning... 3 1 Application and technical index of CT analyzer... 4 1.1 Application... 4 1.2 CT Technical index... 4 2 Hardware... 6 2.1 Introduction... 6 2.2 Power supply... 6 2.3 Test connection terminals...
More informationCT Analyzer. Revolution in current transformer testing and calibration
CT Analyzer Revolution in current transformer testing and calibration Revolutionary way of CT testing Current transformers are used for relaying and metering purposes in electrical power systems. They
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) CT Analyzer Revolution in Current Transformer Testing and Calibration Revolutionary Way of CT Testing Current transformers
More informationCT Analyzer. Test Set for Analysis of Metering Current Transformers According to IEEE C57.13 Standard
CT Analyzer Test Set for Analysis of Metering Current Transformers According to IEEE C57.13 Standard The New Standard in Metering CT Testing In today s competitive electricity market, it is important to
More informationCT Analyzer. Current transformer testing, calibration and assessment
CT Analyzer Current transformer testing, calibration and assessment Analyze your current transformer (CT) with the push of a button How CT Analyzer works > > Injects low test signals into secondary side
More informationContent. 1. Dimensiong of CT s. 2. Error definitions. 3. General design aspects. 4. Linear cores. Certified acc. to ISO 9001/14001, SN EN 45001
Content 1. Dimensiong of CT s 2. Error definitions 3. General design aspects 4. Linear cores Certified acc. to ISO 9001/14001, SN EN 45001 Dimensioning of CT s N P x I P = N S x I S N S = ( I P x N P )
More informationA Revolution in. Transformer EQUIVALENT CIRCUIT DIAGRAM OF A REAL CURRENT TRANSFORMER 1. by Benton Vandiver, Omicron
by Benton Vandiver, Omicron A Revolution in D ifferent test devices and methods are used in the market to verify the performance of current transformers during development, production, installation and
More informationelectronics Data Sheet Industrial Amplifier Special features Dimensions (in mm; 1 mm= inches) B en
C l i p electronics Industrial Amplifier Data Sheet Special features Amplifier and additional units for strain gauge full bridges and inductive half and full bridges Modules for mounting onto support rails
More informationEUROPE S LARGEST SELECTION OF TEST & MEASUREMENT EQUIPMENT FOR HIRE INLEC.COM. Nationwide Low Call
EUROPE S LARGEST SELECTION OF TEST & MEASUREMENT EQUIPMENT FOR HIRE INLEC.COM Nationwide Low Call 0333 6000 600 WHY BUY WHEN YOU CAN HIRE CT Analyzer Revolution in Current Transformer Testing and Calibration
More informationN. TEST TEST DESCRIPTION
Multi function system for testing substation equipment such as: current, voltage and power transformers, over-current protection relays, energy meters and transducers Primary injection testing capabilities
More informationN. TEST TEST DESCRIPTION
Multi function system for testing substation equipment such as: current, voltage and power transformers, all type of protection relays, energy meters and transducers Primary injection testing capabilities
More informationT/3000 T/3000. Substation Maintenance and Commissioning Test Equipment
T/3000 Substation Maintenance and Commissioning Test Equipment MULTI FUNCTION SYSTEM FOR TESTING SUBSTATION EQUIPMENT SUCH AS: CURRENT, VOLTAGE AND POWER TRANSFORMERS, ALL TYPE OF PROTECTION RELAYS, ENERGY
More informationTRAX Transformer and Substation Test System
TRAX Replaces need for multiple test sets Saves time by eliminating need for multiple instruments learning User-friendly interface reduces training and testing time Portable and compact system components
More informationSTS Fully automatic. Large graphic display. Primary injection testing capabilities: up to 3000 A, with the optional module BUX 3000
STS 4000 Multifunction substation maintenance & commissioning test system for current, voltage and power transformers. Capacitance / Tan Delta diagnostic system with the optional module TD 5000. w w w.
More informationNo. 139 Jinghai Third Road, BDA, Beijing, China, Office TEL. +86 (10) Website
PONOVO POWER CO., LTD No. 139 Jinghai Third Road, BDA, Beijing, China, 100176 Office TEL. +86 (10) 5908 9666 E-Mail Info@relaytest.com Website www.relaytest.com T1000 Series Universal Tester VERSION: DATE:
More informationMVCT. Megger VT & CT Analyzer. MVCT Megger VT & CT Analyzer
MVCT Ability to test both VT and CT Easy to use one-button automated test plans Industry leading test duration using patented simultaneous tap measurements Smallest and lightest unit on the market CT Kneepoints
More informationSPAD 346 C Stabilized differential relay
SPAD 346 C Stabilized differential relay Stabilized Differential Relay Type SPAD 346 C Features Integrated three-phase differential relay, three-phase overcurrent relay and multiconfigurable earth-fault
More informationLOPO. Low Power Instrument Transformers. For Medium Voltage Switchgear
LOO Low ower nstrument Transformers For Medium Voltage Switchgear 2 LOO Low ower nstrument Transformers For Medium Voltage Switchgear The introduction of digital technology to measurement and protection
More informationSummation current transformers, type KSU/SUSK
Technical documentation Summation transformers, type KSU/SUSK DEIF /S Frisenborgvej 33 DK-7800 Skive Tel.: +45 9614 9614 Fax: +45 9614 9615 info@deif.com www.deif.com Document no.: 4921210113E Data sheet
More informationTRAX Transformer and Substation Test System
TRAX Replaces need for multiple test sets Saves time by eliminating need for multiple instruments learning User-friendly interface reduces training and testing time Portable and compact system components
More informationTRAX Transformer and Substation Test System
Replaces need for multiple test sets Saves time by eliminating need for multiple instruments learning User-friendly interface reduces training and testing time Portable and compact system components for
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 205-S ULTRASTAB I PN = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
More informationThree-Phase Transformer Demagnetizer DEM60
Three-Phase Transformer Demagnetizer DEM60 Fully automatic demagnetization Demagnetization currents 5 ma 60 A DC Automatic discharging circuit Lightweight 13,1 kg High DC Current Source for Automatic Transformers
More informationAutomatic Transformer Winding Analyser
2293 Automatic Transformer Winding Analyser The 2293 is an automatic winding analyser, optimized for three phase power and distribution transformer measurements. It uniquely combines winding resistance
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 605-S ULTRASTAB I PN = 600 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 200-S ULTRASTAB I PM = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
More information7051Plus / 5051Plus. Extended Specification
7051Plus / 5051Plus Extended Specification V1.1 Time Electronics, Botany Industrial Estate,Tonbridge, Kent, TN9 1RH England Tel: 44 (0)1732 355993 Fax: 44 (0) 1732 770312. E-mail: mail@timeelectronics.co.uk
More informationAdvanced Test Equipment Rentals ATEC (2832) CP RC. Resonance circuit for GIS testing
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) CP RC Resonance circuit for GIS testing A new approach to testing gas-insulated switchgear Testing gas-insulated switchgear
More informationWinding Ohmmeter & Tap Changer Test Set RMO40TD with Demagnetizer
Winding Ohmmeter & Tap Changer Test Set RMO40TD with Demagnetizer Lightweight 9,5 kg Test current 5 ma 40 A DC Measuring range 0,1-2 k Two voltage sense channels Extremely quick measurement Rapid automatic
More informationBurdens & Current Transformer Requirements of MiCOM Relays. Application Notes B&CT/EN AP/B11. www. ElectricalPartManuals. com
Burdens & Current Transformer Requirements of MiCOM Relays Application Notes B&CT/EN AP/B11 Application Notes B&CT/EN AP/B11 Burdens & CT Req. of MiCOM Relays Page 1/46 CONTENTS 1. ABBREVIATIONS & SYMBOLS
More informationWinding Ohmmeter RMO-TW
Winding Ohmmeter RMO-TW Three resistance measurement channels One temperature measurement channel Accuracy 0,1 % Lightweight On-load tap changer verification Automatic resistance measurement for the Heat
More information2C73 Setting Guide. High Impedance Differential Relay. Advanced Protection Devices. relay monitoring systems pty ltd
2C73 Setting Guide High Impedance Differential Relay relay monitoring systems pty ltd Advanced Protection Devices 1. INTRODUCTION This document provides guidelines for the performance calculations required
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 700-S ULTRASTAB I PM = 700 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
More informationCombined Instrument Transformers. Types IVOKT and TMC
Combined Instrument Transformers Types IVOKT and TMC Combined Instrument Transformers Introduction Trench is a recognized world leader in the design and manufacture of high voltage equipment for application
More informationOutdoor Instrument Transformers. Application Guide
Outdoor Instrument Transformers Application Guide Introduction Edited by Knut Sjövall, knut.sjovall@se.abb.com ABB Power Technologies AB Department: PTHV/HV/MT SE-771 80 LUDVIKA, Sweden 2 1HSE 9543 40-00en
More informationWorld-Class Accuracy & Measurement Range (40 Conventional Models)
AC/DC CURRENT SENSOR CT6904 Ultra-High Performance AC/DC Current Sensor World-Class Accuracy & Measurement Range (40 Conventional Models) 500 A (rms) Rated for measurement of large currents 4 MHz (±3 db)
More informationMobile Instrument Transformer Test Systems. Mobile ITTS
Mobile Instrument Transformer Test Systems Mobile ITTS Mobile ITTS General CT - current instrument transformer PT - voltage instrument transformer The test system is designed to perform on-site demagnetisation
More informationProduction Analyzer Rev (USB + FireWire) Rev. 2.x (USB only)
Rev. 1.2-1.6 (USB + FireWire) Rev. 2.x (USB only) Hardware unit for Klippel QC System FEATURES Two channel speaker monitoring Voltage and current Sensors Two channel Microphone Input Built in IEPE Mic
More informationTap Changer Analyzer & Winding Ohmmeter RMO-TD Series
Tap Changer Analyzer & Winding Ohmmeter RMO-TD Series On-load tap changer dynamic resistance measurement Three resistance measurement channels One temperature measurement channel Automatic resistance measurement
More information1 INTRODUCTION ORDER CODE / INFORMATION
INTRODUCTION ORDER CODE / INFORMATION 269/269Plus * * * * * * 269/269Plus SV D/O.4 ORDER CODE / INFORMATION Motor management relay Standard version Drawout version Phase CT Ground CT (required for D/O
More informationTWA Series Three-Phase Winding Ohmmeters & Tap Changer & Winding Analyzers
TWA Series Three-Phase Winding Ohmmeters & Tap Changer & Winding Analyzers Resistance measurement of all tap positions in all six windings performed in a single test True three-phase on-load tap changer
More informationTap Changer Analyzer & Winding Ohmmeter RMO60TD
Tap Changer Analyzer & Winding Ohmmeter RMO60TD Test current 5 ma 60 A DC Rapid automatic demagnetization AC Current monitoring channel Lightweight 13 kg Measuring range 0,1-2 k Two voltage sense channels
More informationTap Changer Analyzer & Winding Ohmmeter RMO25TD
Tap Changer Analyzer & Winding Ohmmeter RMO25TD Test current 5 ma 25 A DC Rapid automatic demagnetization AC Current monitoring channel Lightweight 9,5 kg Measuring range 0,1-2 k Two voltage sense channels
More informationSVERKER 900 Relay and Substation Test System
SVERKER 900 The toolbox for substation 3-phase testing Three currents and four voltages Stand-alone functionality Rugged and reliable for field use Generation of 900 V and 105 A in single phase mode Secondary
More informationAlternative Testing Techniques for Current Transformers. Dinesh Chhajer, PE Technical Support Group MEGGER
Alternative Testing Techniques for Current Transformers Dinesh Chhajer, PE Technical Support Group MEGGER Agenda Current Transformer Definition and Fundamentals Current Transformer Applications o Metering
More informationKončar TMS - Bushing monitoring
Končar TMS - Bushing monitoring Many recent studies have shown that bushing failure is one of the most common causes of transformer failure. Thus need for bushing diagnostic and monitoring system has risen.
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 700-SB ULTRASTAB I PM = 700 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features ± 10 V voltage output
More informationTap Changer Analyzer & Winding Ohmmeter RMO60TD
Tap Changer Analyzer & Winding Ohmmeter RMO60TD Test current 5 ma 60 A DC Rapid automatic demagnetization AC Current monitoring channel Lightweight 13 kg Measuring range 0,1-2 k Two voltage sense channels
More informationMETRAHIT WORLD. International TRMS Multimeter /2.16. Features
3-349-527-03 8/2.16 Resolution: 100 μ, 100 mω, 10 μ, 10 pf, 0.1 Hz Precision temperature measurement ( 50... +800 C) Frequency and duty cycle measurement at 2 to 14 signals up to 1 MHz Capacitance measurement
More informationAdvanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) The toolbox for substation 3-phase testing Three currents and four voltages Stand-alone functionality Rugged and reliable
More information(CCR) Carbon Composition Resistors
Version: March 1, 2017 Electronics Tech. (CCR) Carbon Composition Resistors Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry Bld.,
More informationThree-Phase Winding Ohmmeter TWA25K
Three-Phase Winding Ohmmeter TWA25K Resistance measurement of all tap positions in all six windings performed in a single test Test currents 5 ma 25 A Extremely quick measurement, single-step cable setup
More informationTTR 100 Single-Phase Handheld TTR
TTR 100 Fully automatic; fast; easy-to-use; handheld; robust; lightweight Battery powered with power-saving and shutdown function Tests turns ratio, phase displacement, excitation current, vector group,
More informationLED Driver Compact dimming
Driver LCAI 35W 3mA 900mA ECO C flat ECO series Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 3 900 ma Max. output power 35 W Nominal
More informationPHASED OUT. LED Driver Linear / area dimming. Driver LCAI 20W 350mA 550mA ECO lp ECO series
Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 350 550 ma Max. output power 20 W Nominal life-time up to 100,000 h 5-year guarantee
More informationDC/DC Converter VRA_YMD-6WR3 & VRB_YMD-6WR3 Series
6W isolated - converter in YMD package Wide input voltage and regulated dual/single output CB Patent Protection RoHS FEATURES Wide 2:1 input voltage range High efficiency up to 88% No-load power consumption
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer ITN 1000-S ULTRASTAB I PM = 1000 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
More informationLED Driver Linear / area dimming. Udriver LCAI 20W 350mA 550mA ECO lp ECO series
Udriver LCAI 20W 350mA 550mA ECO lp ECO series Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 350 550 ma Max. output power 20 W Nominal
More informationLED Driver Compact dimming
Driver LCAI 35W 350mA 900mA ECO C ECO series Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 350 900 ma Max. output power 35 W Nominal
More informationPHASED OUT. LED Driver Linear / area dimming. Driver LCAI 20W 150mA 400mA ECO lp ECO series
EL Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 150 400 ma Max. output power 20 W Nominal life-time up to 100,000 h 5-year guarantee
More informationHigh Performance Process & Temperature Controllers
C22 C62 C82 C83 High Performance Process & Temperature Controllers C72 C42 R22 01. Multi Color LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. 200 msec Sampling Rate 04. True Universal
More informationTap Changer Analyzer & Winding Ohmmeter RMO-TT
Tap Changer Analyzer & Winding Ohmmeter RMO-TT On-load tap changer dynamic resistance measurement Three resistance measurement channels Up to six temperature measurement channels Automatic resistance/temperature
More informationWinding Ohmmeter & Tap Changer Test Set RMO10TW
Winding Ohmmeter & Tap Changer Test Set RMO10TW Lightweight - only 7,5 kg Test current 5 ma 10 A DC Measuring range 0,1 µω - 2 kω Two voltage sense channels Extremely quick measurement Automatic discharge
More informationPHASED OUT. LED Driver Compact dimming. Driver LCAI 55W 900mA 1750mA ECO C ECO series
Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 900 1,750 ma Max. output power 55 W Nominal life-time up to 100,000 h 5-year guarantee
More informationProcess transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm
Electronic pressure measurement Process transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm WIKA data sheet PE 86.05 Applications Process technology Machine building and plant
More information2C73 Setting Guide. High Impedance Differential Relay. relay monitoring systems pty ltd Advanced Protection Devices
2C73 Setting Guide High Impedance Differential Relay relay monitoring systems pty ltd Advanced Protection Devices 1. INTRODUCTION This document provides guidelines for the performance calculations required
More informationInsulated Gate Bi-Polar Transistor Type T1600GB45G
Date:- 1 Nov, 214 Data Sheet Issue:- 1 Insulated Gate Bi-Polar Transistor Type Absolute Maximum Ratings VOLTAGE RATINGS MAXIMUM LIMITS V CES Collector emitter voltage 45 V V DC link Permanent DC voltage
More informationDRTS 66 The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters
The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters Testing all relay technologies: electromechanical, solid state, numerical and IEC61850 Manual
More informationThree-Phase Transformer Turns Ratio Tester TRT03B
Three-Phase Transformer Turns Ratio Tester TRT03B Test voltages 10 V, 40 V, 100 V AC Turns ratio range 0,8 15 000 The best turns ratio accuracy of 0,05% Single-phase test voltage Automatic vector group
More informationLED Driver Linear / area dimming
EL Udriver LCAI 35W 900mA 1750mA ECO lp ECO series Product description Dimmable built-in LED Driver for LED Constant current LED Driver Output current adjustable between 900 1,750 ma Max. output power
More informationTap Changer Analyzer & Winding Ohmmeter RMO60TT
Tap Changer Analyzer & Winding Ohmmeter RMO60TT On-load tap changer dynamic resistance measurement Three resistance measurement channels Three temperature measurement channels Automatic resistance/temperature
More informationTRM-203/403 transformer resistance meters
TRM-203/403 transformer resistance meters Vanguard Instruments Company, Inc. www.vanguard-instruments.com TRM-203/TRM-403 transformer resistance meters Product Overview The TRM-203 and TRM-403 are three
More informationAT Current Instrument Transformer Instructions for installation, use and maintenance
Products for High Voltage Application AT Current Instrument Transformer Instructions for installation, use and maintenance 1. Service conditions 2 2. Technical details 2 3. Instruction for installation
More informationTrue Three-Phase Transformer Turns Ratio Tester TRT40A
True Three-Phase Transformer Turns Ratio Tester TRT40A Specially designed option for testing capacitive voltage transformers Test voltages 8 V, 40 V, 125 V AC Up to 5 kv AC with additional CVT40 Turns
More informationMedium Voltage Products. KECA 80 C85 Indoor current sensor
Medium Voltage Products KECA 80 C85 Indoor current sensor Parameters for Application Value Rated primary current of application up to 2 500 A Sensor Parameters Value Highest voltage for equipment, U m
More informationWRM-10 TM TRANSFORMER WINDING RESISTANCE METER
WRM-10 TM TRANSFORMER WINDING RESISTANCE METER USER S MANUAL Vanguard Instruments Company, Inc. 1520 S. Hellman Ave. Ontario, California 91761, USA TEL: (909) 923-9390 FAX: (909) 923-9391 June 2009 Revision
More informationApplication Guide High Impedance Differential Protection Using SIEMENS 7SJ602
Application Guide High Impedance Differential Protection Using SIEMENS 7SJ602 1 / 12 1 INTRODUCTION This document provides guidelines for the performance calculations required for high impedance differential
More informationHigh-precision portable RESISTANCE METER
8 High-precision portable RESISTANCE METER measures from µω to MΩ Features High-precision specs in a portable package(high accuracy of 0.02% rdg.) Design is ideal for maintenance and testing/measurement
More informationLow Voltage alternators - 4 pole LSA 46.2
Low Voltage alternators - 4 pole 18 to 31 kva - Hz / 228 to 381 kva - 6 Hz Electrical and mechanical data 379 en - 212.11 /h 1-8-POWER-8 18 to 31 kva - Hz / 228 to 381 kva - 6 Hz SPECIALLY ADAPTED TO APPLICATIONS
More informationFor the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit.
Current Transducer IN 1000-S I P N = 1000 A For the electronic measurement of current: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features Closed loop (compensated)
More informationTransformer differential protection
Transformer differential protection Page 1 Issued June 1999 Changed since July 1998 Data subject to change without notice (SE970883) Features Three phase differential protection with two, three, five or
More informationTrue Three-Phase Transformer Turns Ratio Tester TRT30A
True Three-Phase Transformer Turns Ratio Tester TRT30A Test voltages 8 V, 40 V, 100 V AC Turns ratio range 0,8 15 000 The best turns ratio accuracy of 0,05% Single-phase test voltage True three-phase test
More informationDC/DC Converter URA_YMD-10WR3 & URB_YMD-10WR3 Series
10W, Ultra wide input isolated & regulated dual/single output,dip packaging, DC-DC converter CB Patent Protection RoHS FEATURES Ultra wide input voltage range (4:1) High efficiency up to 88% No-load power
More informationPHASED OUT. LED Driver Compact dimming. Driver LCAI 20W 350mA 900mA ECO SR ECO series
Product description Independent dimmable LED Driver Constant current LED Driver Output current adjustable between 350 900 ma Max. output power 20 W Nominal life-time up to 100,000 h 5-year guarantee Dimming
More informationCurrent Transformers. Type OSKF
Current Transformers Type OSKF Current Transformers Introduction Trench is a recognized world leader in the design and manufacture of high voltage equipment for application on electric utility and high
More informationProgrammable DPM RISH EINE
Programmable PM RISH EIE ata Sheet www.rishabh.co.in Page 1 of 5 pplication : The digital panel meters RISH Eine PM have been designed for industrial applications, which frequently require precise and
More informationDC/DC Converter URA_ZP-6WR3 & URB_ZP-6WR3 Series
/ Converter FEATURES 6W,Ultra wide input, isolated & regulated dual/ single output, DIP package, - converter CB Patent Protection RoHS Wide range of input voltage (4:1) Efficiency up to 88% No-load power
More informationSPAE 010, 011 High Impedance Protection Relay
SPAE 010, 011 High Impedance Protection Relay User s manual and Technical description f n = 50/60 Hz U n = 50 / 100 / 200 V 2 5 U REF > SPAE 010 0.8 U aux 0.6 1.0 RESET OK x 80... 265 V ~ _ 0.4 U > U n
More informationThree-Phase Transformer Turns Ratio Tester TRT03C
Three-Phase Transformer Turns Ratio Tester TRT03C Test voltages 8 V, 40 V, 80 V AC Turns ratio range 0,8 15 000 The best turns ratio accuracy of 0,05% Single-phase test voltage Automatic vector group detection
More informationDUAL OUTPUT AC CURRENT/VOLTAGE TRANSDUCER
OPERATOR S MANUAL DUAL OUTPUT AC CURRENT/VOLTAGE TRANSDUCER Masibus Automation & Instrumentation Pvt. Ltd. B/30, GIDC Electronics Estate, Sector-25, Gandhinagar-382044, Gujarat, India Web Site: www..com
More informationWide-band Models from DC to 100 MHz
CLAMP SENSOR Wide-band Models from to 1 MHz CLAMP ON PROBE 3276 1 CLAMP ON PROBE 3273-5 to 3276 Because current measurement requires the insertion of a shunt or a CT, the task often becomes difficult due
More informationSEM104 SERIES. SEM104P Pt100 Temperature Transmitter. SEM104TC Thermocouple Temperature Transmitter INDEX SECTION CONTENTS PAGE NO.
INDEX SECTION CONTENTS PAGE NO. SEM104 SERIES SEM104P Pt100 Temperature Transmitter SEM104TC Thermocouple Temperature Transmitter SEM104P 1 1.0 DESCRIPTION 2 2.0 SPECIFICATION 2 3.0 INSTALLATION 24 4.0
More informationExcellent low-cost Process & Temperature Controllers
C22 C62 C82 C83 Excellent low-cost Process & Temperature Controllers C72 C42 R22 01. High Quality LCD Display 02. High Accuracy 18 Bit A-D Input and 15 Bit D-A Output 03. The Fast Sampling Rate in 200
More informationMultimeter 500CVD21 RTU500 series
Remote Terminal Units - Data sheet Multimeter 500CVD21 RTU500 series CT/VT interface with 4 voltage and 24 current inputs for direct monitoring of 3/4 wire 0 300 V AC (line to earth), 0...500 V AC (phase
More informationDS2000ICLA. Specification highlights Symbol Unit Min Typ Max. Features. Applications: 1 ppm linearity. MPS for particles accelerators.
Ultra-stable, high precision (ppm class) fluxgate technology DS Series current transducer for non-intrusive, isolated DC and AC current measurement up to 3000A Features ppm linearity 0 ppm offset Current
More informationHigh-precision process calibrator Model CED7000
Calibration technology High-precision process calibrator Model CED7000 WIKA data sheet CT 85.51 Applications Research and development laboratories Calibration service companies and service industry Industry
More informationMEASUREMENTS. BiTRONICS PowerPlex
MESUEMETS BiTICS Digital Power Transducer The instrument is an utility-grade, three-phase, digital power transducer that connects directly to instrument transformers. Direct-connect high-voltage inputs
More information