Accessories Stand-off Brackets

Size: px

Start display at page:

Download "Accessories Stand-off Brackets"

Sabrina Chase
6 years ago
Views:

1 ccessories Stand-off Brackets The omni antennas radiate horizontally in a circular fashion. However, they can also be mounted laterally to a mast by using an extension bracket. Depending on the spacing and the mast, various types of radiation patterns can be achieved. Bracket with fixed spacing Type o K K Weight Suitable for antennas with a max. wind load of (at 15 km/h) Suitable for antennas with ttachment Material Wind load (at 15 km/h) kg lb mounting kit to pipe masts of 2 54 mounting kit to pipe masts of By means of mounting kit (supplied) to pipes of Hot-dip galvanized steel K61 M: M = 5 m 6169 K614 M: M = 5 m 44.5 x x x x M x x.1 M M12: M = 55 m x x Subject to alteration. Please note: Kathrein does not recoend to use counter nuts. The additional nuts supplied are only meant as spares. ll dimensions in 6168,... Page 1 of 4 KTHREI-Werke KG nton-kathrein-straße 1- P.O. Box ROSEHEIM GERMY Phone Fax

2 ccessories Stand-off Brackets Bracket with adjustable spacing Implementation Stand-off Double stand-off Fig. Fig. B Fig. C Type o K K : D: D Weight min. max. kg lb Suitable for antennas with ttachment Material Wind load (at 15 km/h) mounting kit to pipe masts of By means of mounting kit (supplied) to pipes of Hot-dip galvanized steel M: M = 5 m Double Bracket B2 C1 1 2 Fig. 1: : : 4 x x 1.6 Pipe 48. x 2.6 ( length) free length 65 Pipe (.9 length) free length 2.6 B1 2 1 Fig. B B B B1: B2: B: 4 x x 1.6 Pipe 76.1 x 2.6 free length 18 Pipe..1 free length 7.1 M M M C2 2 1 Fig. C L x 4 L x 4 C1: C2: M: M = 5 m Pipe 7 x 4 free length 25 Pipe free length 9.8 Please note: Kathrein does not recoend to use counter nuts. The additional nuts supplied are only meant as spares. ll dimensions in Subject to alteration. Page 2 of ,... KTHREI-Werke KG nton-kathrein-straße 1- P.O. Box ROSEHEIM GERMY Phone Fax

3 Between Two Half-wave Dipoles between two half-wave dipoles, vertically polarized and positioned vertically in line above each other on one coon mast s d 15 / between two vertically polarized half-wave dipoles mounted laterally Subject to alteration d s ,... Page of 4 KTHREI-Werke KG nton-kathrein-straße 1- P.O. Box ROSEHEIM GERMY Phone Fax

4 Radiation Patterns for Side-mounted Omnidirectional ntennas Examples of horizontal radiation patterns for different mast s where =.25 λ;.5 λ;.75 λ. Examples also apply for antenna 677 K Mast Horizontal Radiation Pattern Tubular mast ntenna =.25 λ =.5 λ =.75 λ Triangular lattice mast ntenna Triangular lattice mast with side length of Subject to alteration. Page 4 of ,... ny previous data sheet issues have now become invalid. KTHREI-Werke KG nton-kathrein-straße 1- P.O. Box ROSEHEIM GERMY Phone Fax

General Information about Panel ntennas Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 19-1-4 class 4.1 E.

5 General Information about Panel ntennas Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS class 4.1 E. The antennas exceed this standard with regard to the following items: Low temperature: 55 C High temperature (dry): +6 C For antennas equipped with FlexRET: The electrical downtilt adjusting is designed to operate under the environmental conditions as described in the valid data sheet of the FlexRET. Ice protection: Due to the very sturdy antenna construction and the protection of the radiating system by the radome, the antenna remains operational even under icy conditions. Environmental tests: Please note: Kathrein antennas fulfil the stated specifications after completion of the environmental tests as defined in ETS The homogenous design of Kathrein s antenna families uses identical modules and materials. Extensive tests have been performed on typical samples and modules. The vibration test has been adapted relating to frequency and acceleration to the conditions of mast mounted antennas. s a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are used under extraordinary operating conditions /d Subject to alteration. EU-RED The mechanical design is based on the environmental conditions as stipulated in ETS Wind loads are calculated according to DI The antennas may be used at locations where the anticipated peak wind velocity or gust wind speed lies within the maximum wind speed listed in the data sheet. We warrant the mechanical safety and electrical functionality under such conditions. The wind speeds are defined in accordance with the DI, E or TI standards. This warranty makes allowance for the partial safety factors specified in those standards. Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process. The details given in our data sheets have to be followed carefully when installing the antennas and accessories. Site planning and installation must be carried out by qualified and experienced staff. ll relevant national safety regulations must be upheld and respected. Incorrect site planning, faulty installation, as well as interfering surroundings on site, may lead to deviations in the electrical parameters compared to those specified in the respective data sheets. The connectors on this product are only suitable for connecting to the compatible counterpart. Please ensure that the connected cable has been fitted with a connector of the same standard, otherwise damage may occur. The tilt values will be set to any arbitrary value in the given tilt range. These values are independent from the frequency band or antenna type and can vary between antennas and bands. Hereby, Kathrein Werke KG declares that the radio equipment is in compliance with Directive 214/5/EU. The full text of the EU declaration of conformity is available at the following internet address: Our quality assurance system and our environmental management system apply to the entire company and are certified by TÜV according to E ISO 91 and E ISO 141. RoHS Our products are compliant to the EU Directive RoHS as well as to other environmentally relevant regulations (e.g. RECH). ny previous data sheet issues have now become invalid. Page 1 of 1 KTHREI-Werke KG nton-kathrein-straße 1- P.O. Box ROSEHEIM GERMY Phone Fax

clamps included Single Unit Double Unit

clamps included Single Unit Double Unit Designed for co-siting purposes Enables feeder sharing Can be used as a combiner near the BTS or in a reciprocal function near the antenna Suitable for indoor or outdoor applications Wall or mast mounting