SP8630 综合测试系统 产品简介 核心竞争力 STARPOINT SP8630 产品手册 V2

Transcription

1 SP8630 综合测试系统 产品简介 星河亮点 SP8630 综合测试系统是全球领先的物联网终端一致性测试解决方案, 满足 3GPP TS 和 规范要求的 NB-IoT/eMTC (Cat.M) 测试需求, 包括射频一致性测试 RRM 一致性测试以及协议一致性测试 测试内容涵盖终端物理层 / 协议栈基本功能和流程 射频发射机 / 接收机特性 解调性能 小区重选 / 切换 / 重建性能 测量和测报性能等项目, 能够对终端能力进行全面的检测和分析 SP8630 已经获得国际认证组织 GCF 和 PTCRB 认证许可, 测试例认证数量始终保持行业领先 在全面支持终端一致性测试的同时,SP8630 还支持功耗测试 数据业务测试等测试类别, 满足多种需求的一站式测试 SP8630 已被广泛应用于物联网终端产业链的各个环节 其应用场景包括芯片 / 模组研发 回归测试 生产线抽检 进网许可测试 ( 中国大陆 ) 运营商入库测试 型号核准测试 国际认证 质量监督检验等, 得到了大量用户好评 核心竞争力 专注于蜂窝物联网终端测试 成熟和稳定的软 / 硬件平台 全球领先的研发进度 最全面的认证测试能力 最广泛的上游企业应用 快速高效的测试过程 友好的用户界面, 轻松的测试体验

2 功能描述 协议一致性测试 (PCT) NB-IoT/eMTC 终端协议一致性测试由 3GPP TS 标准定义, 用来验证被测终端协议栈各层相关功能 SP8630 支持 3GPP 定义的所有 IoT 终端协议一致性测试项目, 包括 Idle Mode Operations 测试 MAC 测试 RLC 测试 PDCP 测试 RRC 测试 EMM-CIOT 测试 ESM-CIOT 测试以及 SMS 测试等 具体测试例如下 : TC No. Test Case Name Technology NB-IoT / Control Plane CIoT EPS optimisation for EPS services NB-IoT /NB-IoT / PLMN selection of RPLMN, HPLMN/EHPLMN, UPLMN and OPLMN / Automatic mode NB-IoT / PLMN selection of RPLMN, HPLMN/EHPLMN, UPLMN and OPLMN / Manual mode NB-IoT / PLMN selection / Periodic reselection / MinimumPeriodicSearchTimer NB-IoT / Cell selection / Qrxlevmin and Qqualmin / Serving cell becomes non-suitable (S<0 or barred or Srxlev > 0 and Squal < 0) NB-IoT / Intra-frequency Cell reselection / Qhyst, Qoffset, Treselection and Cell-specific reselection parameters NB-IoT / Cell reselection using cell status and cell reservations / Access control class 0 to 9 NB-IoT / Cell reselection using cell status and cell reservations / Access control class 11 to NB-IoT / Cell reselection in shared network environment NB-IoT / Inter-frequency cell reselection NB-IoT / Cell reselection / MFBI NB-IoT / RACH Procedure/Preamble Selected by MAC/Temporary C-RNTI NB-IoT / Correct Handling of DL MAC PDU/Assignment/HARQ process / TimeAlignmentTimer expiry NB-IoT / Correct Handling of UL MAC PDU/Assignment/HARQ process/padding NB-IoT / Correct handling of MAC control information / Buffer status NB-IoT / DRX operation / Long cycle configured / Parameterrxs configured by RRC/ DRX command MAC control element reception NB-IoT / DL-SCH /UL-SCH transport block size selection / DCI format N1/ N NB-IoT / AM RLC / Correct use of sequence numbering / Concatenation and reassembly /Polling for status NB-IoT / AM RLC / Receiver status triggers

3 NB-IoT / AM RLC / In sequence delivery of upper layers PDUs/ Different numbers of length indicators NB-IoT / AM RLC / Re-segmentation RLC PDU / SO, FI, LSF/ Re-transmission of RLC PDU NB-IoT / AM RLC / Segmentation and Reassembly / AMD PDU reassembly from AMD PDU segments / Re-ordering of RLC PDU segments NB-IoT / Maintenance of PDCP sequence numbers / User plane / RLC AM NB-IoT / Integrity protection / Ciphering and deciphering / Correct functionality of EPS AS and UP encryption algorithms / SNOW3G NB-IoT / Integrity protection / Ciphering and deciphering / Correct functionality of EPS AS and UP encryption algorithms / AES NB-IoT / Integrity protection / Ciphering and deciphering / Correct functionality of EPS AS and UP encryption algorithms / ZUC NB-IoT / PDCP re-establishment / stored UE AS context is used and drb-continuerohc is configured NB-IoT / PDCP discard NB-IoT / Notification of BCCH modification in idle mode / edrx cycle longer than the modification period NB-IoT / RRC / Paging for connection in idle mode / Multiple paging records / Shared network environment NB-IoT / RRC connection establishment / Paging with systeminfomodification / AB active for AC 0 to 9 / ab-category a, b and c NB-IoT / RRC connection establishment / Paging with systeminfomodification / AB active for AC 11 to 15 / ab-category a, b and c NB-IoT / RRC / Paging for notification of BCCH modification in idle mode / Direct indication for SI update NB-IoT / RRC connection release with extendedwait / extendedwait ignored / RRC connection establishment / Reject with extendedwait NB-IoT / RRC connection establishment / Access Barring for UE with AC 0 to 9 / MO exception data / ab-category a, b and c NB-IoT / RRC connection establishment / Access Barring for UE with AC 11 to 15 / MO exception data / ab-category a, b and c NB-IoT / RRC connection release / Redirection to another NB-IoT frequency NB-IoT / RRC connection release / Redirection to another NB-IoT band NB-IoT / UE capability transfer / Success NB-IoT / RRC Connection Establishment / Multi-Carrier NB-IoT / RRC connection suspend-resume / Success / different cell NB-IoT / RRC connection suspend-resume / Failure / Network reject NB-IoT / RRC connection reconfiguration / Radio bearer establishment / Success / Dedicated bearer / ROHC configured under UP NB-IoT / RRC connection reconfiguration / SRB reconfiguration / Success NB-IoT / Radio link failure / T301 expiry/ T311 expiry

4 NB-IoT / Radio link failure / RRC connection re-establishment reject NB-IoT / Radio link failure / Radio link recovery while T310 is running NB-IoT / Radio link failure / T311 expiry / Dedicated RLF timer (UP CIoT) NB-IoT / Radio link failure / T310 expiry / Dedicated RLF timer (CP CIoT) NB-IoT / Authentication not accepted by the network, GUTI used / Authentication not a b accepted by the UE, SQN failure / Authentication not accepted by the UE, non-eps authentication unacceptable / Network failing the authentication check NB-IoT / NAS Security / Handling of null integrity protection and null ciphering algorithms / NAS count reset to zero / Security mode command with not matching replayed security capabilities / Provision of IMEISV and IMEI NB-IoT / NW initiated detach Re-attach required / UE initiated detach Abnormal case EMM common procedure collision / UE initiated detach Abnormal case Local detach after 5 attempts due to no network response NB-IoT / Attach to new PLMN IMSI / Network reject with Extended Wait Timer / Paging with IMSI / Attach Rejected Illegal ME/UE / Detach upon switch-off NB-IoT / Attach Procedure / Success / List of equivalent PLMNs in the ATTACH ACCEPT message / Attach / Rejected / PLMN not allowed NB-IoT / Attach Abnormal cases / Unsuccessful attach or Repeated rejects for network failures / Change of cell into a new tracking area / EPS services not allowed / Failure due to non integrity protection /UE initiated detach USIM removed from the UE / Detach procedure collision NB-IoT / Normal tracking area update List of equivalent PLMNs in the TRACKING AREA UPDATE ACCEPT message / Normal tracking area update Rejected (IMSI invalid / Illegal ME / UE identity cannot be derived by the network / UE implicitly detached / PLMN not allowed NB-IoT / Normal tracking area update Rejected ( Tracking area not allowed / No suitable cells in tracking area / Roaming not allowed in this tracking area / Congestion) / UE initiated detach Abnormal case Change of cell into a new tracking area NB-IoT / TRACKING AREA UPDATE REJECT / Change of cell into a new tracking area / Access barred due to access class control or NAS signalling connection establishment rejected by the network / Success or fail after several attempts due to no network response / TA belongs to TAI list and status is UPDATED / Tracking area updating and detach procedure collision NB-IoT / UE in NB-S1 mode supporting CIoT Optimizations / Paging with not matching identity / Control Plane Service request Rejected (IMSI invalid / Illegal ME / EPS services not allowed / UE identity cannot be derived by the network / UE implicitly detached) NB-IoT / EPS NAS integrity and encryption / SNOW 3G NB-IoT / EPS NAS integrity and encryption / AES NB-IoT / EPS NAS integrity and encryption / ZUC

5 NB-IoT / Attach Procedure / Success / Last visited TAI, TAI list and equivalent PLMN list handling NB-IoT / Attach / Rejected / Tracking Area not allowed/roaming not allowed in this tracking area / No suitable cells in tracking area NB-IoT / Normal tracking area update / low priority override NB-IoT / Normal tracking area update / Rejected / EPS service not allowed /EPS services not allowed in this PLMN NB-IoT / Attach Success /Normal tracking area update accepted / Periodic tracking area update T3412 Extended Value / PSM NB-IoT / Attach & Normal tracking area update Procedure / Success / without Idle edrx parameters / With Idle edrx parameters/ With and without Idle edrx and PSM parameters NB-IoT / UE routing of uplinks packets/ue requested PDN disconnect procedure accepted by the network a NB-IoT / UE routing of uplinks packets / Control Plane NB-IoT / UE requested bearer resource allocation and modification accepted by the network / New EPS bearer context and existing EPS bearer context NB-IoT / UE requested bearer resource allocation error handling (Allocation not accepted by the network / Expiry of timer T3480 / BEARER RESOURCE ALLOCATION REJECT message including cause #43 "unknown EPS bearer context" NB-IoT / UE requested PDN connectivity procedure not accepted / UE requested PDN connectivity accepted Dual priority T3396 override UE requested PDN connectivity accepted / Dual priority / T3346 override PLMN selection of RPLMN, HPLMN/EHPLMN, UPLMN and OPLMN / Automatic mode b PLMN selection of RPLMN, HPLMN/EHPLMN, UPLMN and OPLMN / Automatic mode / Single Frequency operation PLMN selection of "Other PLMN/access technology combinations" / Automatic mode a PLMN selection of "Other PLMN/access technology combinations" / Automatic mode / Single Frequency operation b Cell reselection of eplmn in manual mode / Single Frequency operation PLMN selection in shared network environment / Automatic mode a a PLMN selection of RPLMN, HPLMN/EHPLMN, UPLMN and OPLMN / Automatic mode / User reselection / Single Frequency operation PLMN selection / Periodic reselection / MinimumPeriodicSearchTimer / Single Frequency operation c Cell selection / Qrxlevmin / Enhanced coverage d Cell selection / Qqualmin / Enhanced coverage a Cell selection / Intra E-UTRAN / Serving cell becomes non-suitable (Srxlev> 0 and Squal<0) Cell reselection a Cell reselection using Treselection / Enhanced coverage

6 b Cell reselection from cell in enhanced coverage to inter-frequency cell in normal coverage a Cell reselection / Equivalent PLMN / Single Frequency operation a a Cell reselection using cell status and cell reservations / Access control class 0 to 9 / Single Frequency operation Cell reselection using cell status and cell reservations / Access control class 11 to 15 / Single Frequency operation Cell reselection in shared network environment Intra-frequency cell reselection / MFBI CCCH mapped to UL SCH/DL-SCH / Reserved Logical Channel ID DTCH or DCCH mapped to UL SCH/DL-SCH / Reserved Logical Channel ID Correct selection of RACH parameters / Random access preamble and PRACH a resource explicitly signalled to the UE by RRC / Non-contention based random access procedure Correct selection of RACH parameters / Random access preamble and PRACH resource explicitly signalled to the UE in PDCCH Order / Non-contention based random access procedure Correct selection of RACH parameters / Preamble selected by MAC itself / Contention based random access procedure / Enhanced Coverage Random access procedure / Successful Random access procedure / MAC PDU containing multiple RARs Maintenance of uplink time alignment MAC contention resolution / Temporary CRNTI MAC contention resolution / C-RNTI MAC back off indicator Correct handling of DL assignment / Dynamic case Correct handling of DL assignment / Semi persistent case a MAC PDU header handling / UE with limited TB size a Correct HARQ process handling / DCCH and DTCH / Enhanced Coverage / CE Mode A a Correct HARQ process handling / CCCH / Enhanced Coverage / CE Mode A MAC padding MAC reset DL Correct handling of UL assignment / Dynamic case Correct handling of UL assignment / Semi persistent case a Logical channel prioritization handling / UE with limited TB size Correct handling of MAC control information / Scheduling requests and PUCCH a Correct handling of MAC control information / Buffer status / UL data arrive in the UE Tx buffer and retransmission of BSR / Regular BSR Correct handling of MAC control information / Buffer status / UL resources are allocated / Padding BSR Correct handling of MAC control information / Buffer status / UL resources are allocated / Cancellation of Padding BSR

7 Correct handling of MAC control information / Buffer status / Periodic BSR timer expires MAC padding MAC reset / UL MAC PDU header handling UE Power headroom reporting / Periodic reporting UE Power headroom Reporting / DL_Pathloss change reporting UE power headroom reporting / Extended PHR b Correct HARQ process handling / Enhanced Coverage / CE Mode A 7.1.4a.1 Correct downlink reception and uplink transmission when specific valid subframes is signaled for BL UE Predefined intra-tti PUSCH hopping (N_sb=2/3/4) a DRX operation / Short cycle not configured / Parameters configured by RRC / Enhanced Coverage DRX Operation / Short cycle not configured / DRX command MAC control element reception DL-SCH transport block size selection / DCI format 6-1A / RA type 2 / Localised VRB UL-SCH transport block size selection / DCI format 6-0A UM RLC / Segmentation and reassembly / 5-bit SN / Framing Info Field UM RLC / Segmentation and reassembly / 10-bit SN / Framing Info Field UM RLC / Reassembly / 5-bit SN / LI value > PDU size UM RLC / Reassembly / 10-bit SN / LI value > PDU size UM RLC / 5-bit SN / Correct use of sequence numbering UM RLC / 10-bit SN / Correct use of sequence numbering UM RLC / Concatenation, segmentation and reassembly UM RLC / In sequence delivery of upper layer PDUs without residual loss of RLC PDUs / Maximum re-ordering delay below t-reordering UM RLC / In sequence delivery of upper layer PDUs without residual loss of RLC PDUs / Maximum re-ordering delay exceeds t-reordering UM RLC / In sequence delivery of upper layer PDUs with residual loss of RLC PDUs / Maximum reordering delay exceeds t-reordering UM RLC / Duplicate detection of RLC PDUs UM RLC / RLC re-establishment procedure AM RLC / Concatenation and reassembly AM RLC / Segmentation and reassembly / No PDU segmentation AM RLC / Segmentation and reassembly / Framing Info Field AM RLC / Segmentation and reassembly / Different numbers of length indicators AM RLC / Reassembly / LI value > PDU size AM RLC / Correct use of sequence numbering AM RLC / Control of transmit window AM RLC / Control of receive window AM RLC / Polling for status

8 AM RLC / Receiver status triggers AM RLC / Reconfiguration of RLC parameters by upper layers AM RLC / In sequence delivery of upper layers PDUs AM RLC / Re-ordering of RLC PDU segments AM RLC / Re-transmission of RLC PDU without re-segmentation AM RLC / Re-segmentation RLC PDU / SO, FI, LSF AM RLC / Reassembly / AMD PDU reassembly from AMD PDU segments, Segment Offset and Last Segment Flag fields AM RLC / Duplicate detection of RLC PDUs AM RLC / RLC re-establishment at RRC connection reconfiguration including mobilitycontrolinfo IE Maintenance of PDCP sequence numbers / User plane / RLC AM Maintenance of PDCP sequence numbers / User plane / RLC UM / Short PDCP SN (7 bits) Maintenance of PDCP sequence numbers / User plane / RLC UM / Long PDCP SN (12 bits) Ciphering and deciphering / Correct functionality of EPS AS encryption algorithms / SNOW3G Ciphering and deciphering / Correct functionality of EPS UP encryption algorithms / SNOW3G Ciphering and deciphering / Correct functionality of EPS AS encription algorithms / AES Ciphering and deciphering / Correct functionality of EPS UP encryption algorithms / AES Integrity protection / Correct functionality of EPS AS integrity algorithms / SNOW3G Integrity protection / Correct functionality of EPS AS integrity algorithms / AES PDCP handover / Lossless handover / PDCP sequence number maintenance PDCP handover / Non-lossless handover PDCP sequence number maintenance PDCP handover / Lossless handover / PDCP status report to convey the information on missing or acknowledged PDCP SDUs at handover PDCP handover / In-order delivery and duplicate elimination in the downlink PDCP discard a RRC / Direct Indication Information / Notification of BCCH modification in idle mode RRC / Paging for notification of BCCH modification in idle mode RRC / Paging for connection in idle mode / Multiple paging records RRC / Paging for connection in idle mode / Shared network environment RRC / Paging / EAB active RRC connection establishment / Reject with wait time RRC connection establishment / Return to idle state after T300 timeout RRC connection establishment / 0% access probability for MO calls, no restriction for MO signalling

9 RRC connection establishment / Non-zero percent access probability for MO calls, no restriction for MO signalling RRC connection establishment / 0% access probability for AC 0 to 9, AC 10 is barred, AC 11 to 15 are not barred, access for UE with access class in the range 11 to 15 is allowed RRC connection establishment / Range of access baring time RRC Connection Establishment / 0% access probability for MO calls, non-zero percent access probability for MO signalling RRC connection establishment / 0% access probability for MO calls, 0% access probability for MO signalling RRC connection release / Success / With priority information RRC connection reconfiguration / Radio bearer establishment for transition from RRC_IDLE to RRC_CONNECTED / Success / Default bearer / early bearer establishment RRC connection reconfiguration / Radio bearer establishment / Success / Dedicated bearer RRC connection reconfiguration / Radio bearer establishment for transition from RRC_IDLE to RRC CONNECTED / Success / Latency check RRC connection reconfiguration / Radio bearer establishment for transition from RRC_IDLE to RRC CONNECTED / Success / Latency check / SecurityModeCommand and RRCConnectionReconfiguration transmitted in the same TTI RRC connection reconfiguration / Radio bearer establishment / Success / SRB RRC connection reconfiguration / Radio bearer establishment / Success / Dedicated bearer / ROHC configured RRC connection reconfiguration / Radio resource reconfiguration / Success RRC connection reconfiguration / SRB/DRB reconfiguration / Success RRC connection reconfiguration / Radio bearer release / Success a RRC connection reconfiguration / Handover / Success / Intra-frequency in Enhanced Coverage Measurement configuration control and reporting / Intra E-UTRAN measurements / Event A1 Measurement configuration control and reporting / Intra E-UTRAN measurements / Event A2 Measurement configuration control and reporting / Intra E-UTRAN measurements / Two simultaneous events A3 (intra frequency measurements) Measurement configuration control and reporting / Intra E-UTRAN measurements / Blacklisting Measurement configuration control and reporting / Intra E-UTRAN measurements / Continuation of the measurements after RRC connection re-establishment Measurement configuration control and reporting / Intra Frequency measurements / Continuation of the measurements after RRC connection re-establishment Measurement configuration control and reporting / SON / ANR / CGI reporting of E-UTRAN cell

10 Radio link failure / RRC connection re-establishment Success Radio link failure / T301 expiry Radio link failure / T311 expiry Radio link failure / RRC connection re-establishment reject Radio link failure / Radio link recovery while T310 is running Radio link failure / T311 expiry / Dedicated RLF timer UE capability transfer / Success Authentication not accepted by the network, GUTI used, authentication reject and re-authentication Authentication not accepted by the UE / MAC code failure Authentication not accepted by the UE / SQN failure Abnormal cases / Network failing the authentication check Authentication not accepted by the UE/ non-eps authentication unacceptable NAS security mode command accepted by the UE NAS security mode command not accepted by the UE No emergency bearer service / NAS security mode command with EIA0 not accepted by the UE Identification procedure / IMEI requested / IMEISV EMM information procedure Attach / Success / Valid GUTI a b Attach Procedure / Success / Last visited TAI, TAI list and equivalent PLMN list handling Attach Procedure / Success / Last visited TAI, TAI list and equivalent PLMN list handling / Single Frequency operation Attach Procedure / Success / With IMSI, GUTI reallocation a a AttachWithIMSI configured / Selected PLMN is neither the registered PLMN nor in the list of equivalent PLMNs / Success Attach Procedure / Success / List of equivalent PLMNs in the ATTACH ACCEPT message Attach Procedure / Success / List of equivalent PLMNs in the ATTACH ACCEPT message / Single Frequency operation b Attach / Success / native GUMMEI c Attach / Success / PSM Attach / Rejected / IMSI invalid Attach / Rejected / Illegal ME Attach / Rejected / PLMN not allowed a Attach / Rejected / PLMN not allowed / Single Frequency operation Attach / Rejected / Tracking area not allowed Attach / Rejected / Roaming not allowed in this tracking area a Attach / Rejected / Roaming not allowed in this tracking area / Single Frequency operation Attach / Rejected / EPS services not allowed in this PLMN

11 a Attach / Rejected / EPS services not allowed in this PLMN / Single Frequency operation Attach / Rejected / No suitable cells in tracking area Attach / Abnormal case / Failure due to non integrity protection Attach / Abnormal case / Access barred because of access class barring or NAS signalling connection establishment rejected by the network Attach / Abnormal case / Unsuccessful attach after 5 attempts Attach / Abnormal case / Repeated rejects for network failures Attach / Abnormal case / Change of cell into a new tracking area Attach / Abnormal case / Mobile originated detach required Attach / Abnormal case / Detach procedure collision Attach / Abnormal case / Network reject with Extended Wait Timer a Attach Procedure / EAB broadcast handling / ExtendedAccessBarring configured in the UE Combined attach procedure / Success / EPS services only / IMSI unknown in HSS UE initiated detach / UE switched off UE initiated detach / USIM removed from the UE UE initiated detach / Abnormal case / Local detach after 5 attempts due to no network response UE initiated detach / Abnormal case / Detach procedure collision UE initiated detach / Abnormal case / Detach and EMM common procedure collision UE initiated detach / Abnormal case / Change of cell into a new tracking area NW initiated detach / Re-attach required NW initiated detach / Abnormal case / EMM cause not included Normal tracking area update / Accepted a Normal tracking area update / Accepted / PSM Normal tracking area update / List of equivalent PLMNs in the TRACKING AREA UPDATE ACCEPT message Periodic tracking area update / Accepted a Periodic tracking area update / Accepted / Per-device timer b Periodic tracking area update / Accepted / PSM / T3412 Extended Value UE receives an indication that the RRC connection was released with cause "load balancing TAU required" a Normal tracking area update / low priority override Normal tracking area update / EAB broadcast handling / ExtendedAccessBarring b configured in the UE / ExtendedAccessBarring and Override_ExtendedAccessBarring configured in the UE a Normal tracking area update / NAS signalling connection recovery Normal tracking area update / Rejected / UE identity cannot be derived by the network Normal tracking area update / Rejected / UE implicitly detached

12 a Normal tracking area update / Rejected / PLMN not allowed / Single Frequency operation Normal tracking area update / Rejected / Tracking area not allowed a Normal tracking area update / Rejected / EPS services not allowed in this PLMN / Single Frequency operation Normal tracking area update / Rejected / No suitable cells in tracking area Normal tracking area update / Rejected / Not authorized for this CSG a Normal tracking area update / Rejected / Congestion Normal tracking area update / Abnormal case / access barred due to access class control or NAS signalling connection establishment rejected by the network Normal tracking area update / Abnormal case / Success after several attempts due to no network response / TA belongs to TAI list and status is UPDATED / TA does not belong to TAI list Normal tracking area update / Abnormal case / Failure after 5 attempts due to no network response Normal tracking area update / Abnormal case / TRACKING AREA UPDATE REJECT Normal tracking area update / Abnormal case / Change of cell into a new tracking area Normal tracking area update / Abnormal case / Tracking area updating and detach procedure collision Service request initiated by UE for user data Service request / Rejected / UE identity cannot be derived by the network a Service request / Rejected / UE implicitly detached Service request / Abnormal case / Switch off Service request / Abnormal case / Procedure collision Paging procedure Integrity protection / Correct functionality of EPS NAS integrity algorithm / SNOW3G Integrity protection / Correct functionality of EPS NAS integrity algorithm / AES Ciphering and deciphering / Correct functionality of EPS NAS encryption algorithm / SNOW3G Ciphering and deciphering / Correct functionality of EPS NAS encryption algorithm / AES Dedicated EPS bearer context activation / Success EPS bearer context modification / Success EPS bearer context deactivation / Success UE requested PDN connectivity accepted by the network a UE requested PDN connectivity accepted / Dual priority / T3396 override b UE requested PDN connectivity accepted / Dual priority / T3346 override UE requested PDN connectivity not accepted UE requested PDN connectivity not accepted / Network reject with Extended Wait Timer UE requested PDN disconnect procedure accepted by the network

13 UE requested bearer resource allocation accepted by the network / New EPS bearer context UE requested bearer resource allocation accepted by the network / Existing EPS bearer context UE requested bearer resource allocation not accepted by the network UE requested bearer resource allocation / Expiry of timer T UE requested bearer resource allocation / BEARER RESOURCE ALLOCATION REJECT message including cause #43 invalid EPS bearer identity UE requested bearer resource modification accepted by the network / New EPS bearer context UE requested bearer resource modification accepted by the network / Existing EPS bearer context UE requested bearer resource modification not accepted by the network UE requested bearer resource modification / Cause #36 "regular deactivation" UE requested bearer resource modification / BEARER RESOURCE MODIFICATION REJECT message including cause #43 invalid EPS bearer identity UE requested bearer resource modification / Collision of a UE requested bearer resource modification procedure and EPS bearer context deactivation procedure UE requested bearer resource modification / Expiry of timer T UE requested bearer resource modification / Dual priority / low priority override UE routing of uplinks packets Multiple MO-SMS over SGs / Idle mode Multiple MO-SMS over SGs / Active mode Data transfer of E-UTRA radio bearer combinations 1, 3, 6 and Data transfer of E-UTRA radio bearer combinations 2, 4, 7 and Data transfer of E-UTRA radio bearer combinations 5, 6, 8, 11 and Data transfer of E-UTRA radio bearer combination Activation and deactivation of additional radio bearer in E-UTRA RRC connection reconfiguration / E-UTRA to E-UTRA Intra-system connection re-establishment / Radio link recovery while T310 is running Intra-system connection re-establishment / Re-establishment of a new connection when further data is to be transferred First Reconfiguration procedure where full configuration parameter from a target enb is provided after successful completion of the Re-establishment procedure:- data transfer prior and after the mobility RRC connection reconfiguration / Handover/ Full configuration / DRB establishment

14 射频一致性测试 (RCT) NB-IoT/eMTC 终端射频一致性测试由 3GPP TS 标准定义, 用来验证被测终端射频性能和物理层相关算法 SP8630 支持 3GPP 定义的所有 IoT 终端射频一致性测试项目, 包括发射机特性测试 接收机特性测试 解调性能测试等 具体测试例如下 : TC No. Test Case Name Technology 6.2.2F UE Maximum Output Power for category NB F Configured UE Transmitted Output Power for UE category NB F Minimum Output Power for category NB F.1 General ON/OFF time mask for category NB F.2 NPRACH time mask for category NB F.1 Power Control Absolute power tolerance for category NB F.2 Power Control Relative power tolerance for category NB F.3 Aggregate power control tolerance for category NB F Frequency Error for category NB F.1 Error Vector Magnitude (EVM) for category NB F Carrier Leakage for category NB F In-band emissions for non allocated RB for category NB F Occupied Bandwidth for category NB F Spectrum Emission Mask for category NB F Adjacent Channel Leakage power Ratio for category NB F.1 Transmitter Spurious emissions for category NB F.2 Spurious emission band UE co-existence for category NB1 6.7F Transmit intermodulation for category NB1 7.3F.1 Reference sensitivity level without repetitions for category NB1 7.3F.2 Reference sensitivity level with repetitions for category NB1 7.4F Maximum input level for category NB1 7.5F Adjacent Channel Selectivity (ACS) for category NB F In-band blocking for category NB F Out-of-band blocking for category NB1 7.7F Spurious response for category NB F Wide band Intermodulation for category NB Demodulation of NPDSCH (Cell-Specific Reference Symbols) in In-band mode for category NB1 Demodulation of NPDSCH (Cell-Specific Reference Symbols) in standalone and Guard-band mode for category NB Demodulation of NPDCCH single-antenna performance for category NB Demodulation of NPDCCH Transmit diversity performance for category NB EA UE Maximum Output Power for UE category M1

15 6.2.5EA Configured transmitted power for UE category M EA Minimum Output Power for UE category M EA.1 General ON/OFF time mask for UE category M EA.2 PRACH and SRS ON/OFF time mask for UE category M EA.1 Power Control Absolute power tolerance for UE category M EA.2 Power Control Relative power tolerance for UE category M EA.3 Aggregate power control tolerance for UE category M EA Frequency Error for UE category M EA.1 Error Vector Magnitude for UE category M EA.2 PUSCH-EVM with exclusion period for UE category M EA Carrier leakage for UE category M EA In-band emissions for non allocated RB for UE category M EA EVM equalizer spectrum flatness for UE category M EA Occupied bandwidth for UE category M EA Spectrum Emission Mask for UE category M EA Additional Spectrum Emission Mask for UE category M EA Adjacent Channel Leakage power Ratio for UE category M EA.1 Transmitter Spurious emissions for UE category M EA.2 Spurious emission band UE co-existence for UE category M EA.3 Additional spurious emissions for UE category M1 6.7EA Transmit intermodulation for UE category M1 7.3EA Reference sensitivity level for UE category M1 7.4EA Maximum input level for UE category M1 7.5EA Adjacent Channel Selectivity (ACS)for UE category M EA In-band blocking for UE category M EA Out-of-band blocking for UE category M EA Narrow band blocking for UE category M1 7.7EA Spurious response for UE category M EA Wide band intermodulation for UE category M1 7.9EA Spurious emissions UE category M FDD and half-duplex FDD Closed-loop spatial multiplexing performance for UE category M1 FDD and half-duplex FDD PDSCH Single-layer Spatial Multiplexing on antenna ports 7 or 8 for UE category M FDD and half-duplex FDD PDSCH Transmit Diversity 2x1 for UE category M TDD Closed-loop spatial multiplexing performance for UE category M TDD PDSCH Single-layer Spatial Multiplexing on antenna ports 7 or 8 for UE category M TDD PDSCH Transmit Diversity for UE category M FDD and HD-FDD demodulation of MPDCCH in CE Mode A TDD demodulation of MPDCCH in CE Mode A

16 FDD and half-duplex FDD CQI reporting definition under AWGN conditions in enhanced coverage TDD CQI reporting definition under AWGN conditions in enhanced coverage FDD and half-duplex FDD UE-selected subband CQI TDD UE-selected subband CQI RRM 一致性测试 NB-IoT/eMTC RRM 一致性测试由 3GPP TS 标准定义, 用来验证被测终端无线资源管理性能 SP8630 支持 3GPP 定义的所有 IoT 终端 RR 一致性测试项目, 包括空闲态移劢性测试 连接态移劢性测试 ( 只适用于 emtc) RRC 连接移劢性管理测试 时延和信令特性测试 终端测量流程测试 ( 只适用于 emtc) 以及测量性能要求测试 ( 只适用于 emtc) 具体测试例如下 : TC No. Test Case Name Technology HD-FDD Cell Re-selection Intra frequency case for Category NB1 UE In-Band mode under Normal Coverage HD-FDD Intra-frequency RRC Re-establishment for category NB1 UE in In-Band mode under Enhanced coverage HD-FDD Inter-frequency RRC Re-establishment for category NB1 UE in In-Band mode under normal Coverage HD-FDD Transmit Timing Accuracy Test for Category NB1 UE In-Band mode under Normal Coverage HD-FDD Transmit Timing Accuracy Test for Category NB1 UE In-band mode under Enhanced Coverage HD-FDD UE Timing Advance Adjustment Accuracy Test for Category NB1 UE in Standalone Mode under Enhance Coverage HD-FDD Radio Link Monitoring Test for Out-of-sync in DRX for UE category NB1 In-band mode in normal coverage HD-FDD Radio Link Monitoring Test for Out-of-sync in DRX for UE category NB1 In-band mode in Enhanced Coverage HD-FDD Radio Link Monitoring Test for In-sync with DRX for UE Category NB1 In-Band mode in Enhanced Coverage HD-FDD Radio Link Monitoring Test for In-sync with DRX for UE Category NB1 In-Band mode in Normal Coverage HD-FDD Radio Link Monitoring Test for In-sync without DRX for UE Category NB1 In-Band mode in Normal Coverage HD-FDD Radio Link Monitoring Test for In-sync without DRX for UE Category NB1 In-Band mode in Enhanced Coverage

17 E-UTRAN FD FDD Intra frequency case for Cat-M1 UE in normal coverage E-UTRAN HD FDD Intra frequency case for Cat-M1 UE in normal coverage E-UTRAN TDD TDD Intra frequency case for Cat-M1 UE in normal coverage E-UTRAN FDD-FDD Intra frequency handover for Cat-M1 UEs in CEModeA E-UTRAN HD-FDD Intra frequency handover for Cat-M1 UEs in CEModeA E-UTRAN TDD Intra frequency handover for Cat-M1 UEs in CEModeA E-UTRAN FD-FDD Intra-frequency RRC Re-establishment for Cat-M1 UE in CEModeA E-UTRAN HD-FDD Intra-frequency RRC Re-establishment for Cat-M1 UE in CEModeA E-UTRAN TDD Intra-frequency RRC Re-establishment for Cat-M1 UE in CEModeA E-UTRAN FDD Contention Based Random Access Test for Cat-M1 UEs in Normal Coverage E-UTRAN HD-FDD Contention Based Random Access Test for Cat-M1 UEs in Normal Coverage E-UTRAN TDD Contention Based Random Access Test for Cat-M1 UEs in Normal Coverage E-UTRAN FDD UE Transmit Timing Accuracy Tests for Cat-M1 UE in CEModeA E-UTRAN HD-FDD UE Transmit Timing Accuracy Tests for Cat-M1 UE in CEModeA E-UTRAN TDD - UE Transmit Timing Accuracy Tests for Cat-M1 UE in CEModeA E-UTRAN FDD Timing Advance Adjustment Accuracy Test for Cat-M1 UE in CEModeA E-UTRAN HD-FDD UE Timing Advance Adjustment Accuracy Test for Cat-M1 UE in CEModeA E-UTRAN TDD Timing Advance Adjustment Accuracy Test for Cat-M1 UE in CEModeA E-UTRAN FD-FDD Radio Link Monitoring Test for Out-of-sync for Cat-M1 UE in CEMode A E-UTRAN FD-FDD Radio Link Monitoring Test for In-Sync for Cat-M1 UE in CEMode A E-UTRAN FD-FDD Radio Link Monitoring Test for Out-of-sync in DRX for UE category M1 configured in CEMode A E-UTRAN FD-FDD Radio Link Monitoring Test for In-sync in DRX for UE Category M1 configured in CEMode A E-UTRAN HD-FDD Radio Link Monitoring Test for Out-of-sync for Cat-M1 UE in CEMode A E-UTRAN HD-FDD Radio Link Monitoring Test for In-Sync for Cat-M1 UE in CEMode A E-UTRAN HD-FDD Radio Link Monitoring Test for Out-of-sync in DRX for UE category M1 configured in CEMode A E-UTRAN HD-FDD Radio Link Monitoring Test for In-sync in DRX for UE Category M1 configured in CEMode A E-UTRAN TDD Radio Link Monitoring Test for Out-of-sync for Cat-M1 UE in CEMode A E-UTRAN TDD Radio Link Monitoring Test for In-Sync for Cat-M1 UE in CEMode A E-UTRAN TDD Radio Link Monitoring Test for Out-of-sync in DRX for UE category M1 configured in CEMode A E-UTRAN TDD Radio Link Monitoring Test for In-sync in DRX for UE Category M1 configured in CEMode A

18 E-UTRAN FDD-FDD intra-frequency event triggered reporting under fading propagation conditions in asynchronous cells for Cat-M1 UE in CEModeA E-UTRAN FDD-FDD intra-frequency event triggered reporting under fading propagation conditions in synchronous cells for Cat-M1 UE in CEModeA E-UTRAN FDD-FDD intra-frequency event triggered reporting under fading propagation conditions in synchronous cells for Cat-M1 UE in CEModeA in DRX E-UTRAN HD-FDD intra-frequency event triggered reporting under fading propagation conditions in asynchronous cells for Cat-M1 UE in CEModeA E-UTRAN HD-FDD intra-frequency event triggered reporting under fading propagation conditions in synchronous cells for Cat-M1 UE in CEModeA E-UTRAN HD-FDD intra-frequency event triggered reporting under fading propagation conditions in synchronous cells for Cat-M1 UE in CEModeA in DRX E-UTRAN TDD intra-frequency event triggered reporting under fading propagation conditions in synchronous cells for Cat-M1 UE in CEModeA E-UTRAN TDD intra-frequency event triggered reporting under fading propagation conditions in synchronous cells for Cat-M1 UE in CEModeA in DRX FD-FDD RSRP Intra frequency case for Cat-M1 UE in CEModeA HD-FDD RSRP Intra frequency case for Cat-M1 UE in CEModeA TDD RSRP Intra frequency case for Cat-M1 UE in CEModeA 系统组成 硬件 Module Unit Qty. Applicable Applicable Technology Test Category SP8315 无线测试仪硬件平台 ( 用于模拟 NB-IoT/eMTC 小区, 与被测终端建立通信 并承载 Set 2 NB-IoT/eMTC PCT/RCT/RRM 射频特性测量 矢量信号干扰 基带信道仿真等功能 ) SP8315 硬件选件 : 射频通道 II ( 增加第二套独立的硬件模组, 使单台 SP8315 具备双通道并行 Piece 2 NB-IoT/eMTC PCT/RCT/RRM 测试能力和两小区网络环境模拟能力 ) 频谱分析仪 ( 用于杂散 互调等 RF 一致性测试项目 ) Set 1 NB-IoT/eMTC RCT 信号发生器 ( 用于互调 阻塞 杂散响应等 RF 一致性测试项目 ) Set 1 NB-IoT/eMTC RCT

19 RFS200 射频切换箱 ( 主要用于射频一致性测试, 为测试系统中各台仦表提供满足规范要求的射频链路 并为 band 测试提供滤波器支路 ) RFS200-Filter 滤波器箱 ( 提供更多滤波器支路, 涵盖 NB-IoT/eMTC 相关的所有 GCF 和 PTCRB 认证 band) SP8630 系统服务器 ( 装载 UI 和测试例软件的系统控制计算机 ) Keithley2601B 电流计 ( 用于终端功耗类测试项目, 也可用于为终端提供直流电源 ) Set 1 NB-IoT/eMTC RCT Set 1 NB-IoT/eMTC RCT Set 1 NB-IoT/eMTC PCT/RCT/RRM Set 1 NB-IoT/eMTC Optional 软件 Module Unit Qty. Applicable Applicable Technology Test Category SP8315 无线测试仪软件 V1.0 Suite 2 无线测试仪 NB-IoT 基础软件 ( 提供基本的 NB-IoT 协议功能, 涵盖射频综测所需的信令流 Piece 1 NB-IoT PCT/RCT/RRM 程和参数配置需求 ) 无线测试仪 NB-IoT 增强软件 ( 在 NB-IoT 基础软件之外, 提供全面的 NB-IoT 接入层协议 Piece 1 NB-IoT PCT/RRM 栈功能 ) NB-IoT 终端射频特性测试软件 ( 提供符合 3GPP 的 NB-IoT 终端发射机 / 接收机射频性能测试功能 不含杂散测试 带外阻塞测试等需要引入频谱 Piece 1 NB-IoT RCT 仦 信号源的测试项目 ) 无线测试仪 FDD emtc 基础软件 emtc-fdd ( 提供基本的 FDD 全双工和 FDD 半双工 emtc 协议功能, Piece 1 涵盖射频综测所需的信令流程和参数配置需求 ) PCT/RCT/RRM 无线测试仪 FDD emtc 增强软件 emtc-fdd ( 在 FDD emtc 基础软件之外, 提供全面的 FDD emtc 接 Piece 1 入层协议栈功能 ) PCT/RRM FDD emtc 终端射频特性测试软件 ( 提供符合 3GPP 的 FDD emtc 终端发射机 / 接收 emtc-fdd Piece 1 机射频性能测试功能 不含杂散测试 带外阻塞测试等需要引入 RCT 频谱仦 信号源的测试项目 ) 无线测试仪 TDD emtc 基础软件 emtc-tdd ( 提供基本的 TDD emtc 协议功能, 涵盖射频综测所需的信 Piece 1 令流程和参数配置需求 ) PCT/RCT/RRM

20 无线测试仪 TDD emtc 增强软件 emtc-tdd ( 在 TDD emtc 基础软件之外, 提供全面的 TDD emtc 接 Piece 1 入层协议栈功能 ) PCT/RRM TDD emtc 终端射频特性测试软件 ( 提供符合 3GPP 的 TDD emtc 终端发射机 / 接收 emtc-tdd Piece 1 机射频性能测试功能 不含杂散测试 带外阻塞测试等需要引入 RCT 频谱仦 信号源的测试项目 ) 无线测试仪 NB-IoT R14 协议升级 ( 支持 3GPP R14 版本定义的 NB-IoT 物理信道及协议栈功能 ) Piece 1 NB-IoT R14 PCT/RCT/RRM 无线测试仪 FDD emtc R14 协议升级 emtc-fdd ( 支持 3GPP R14 版本定义的 FDD 全双工和 FDD 半双工 emtc Piece 1 R14 物理信道及协议栈功能 ) PCT/RCT/RRM 无线测试仪 TDD emtc R14 协议升级 emtc-tdd Piece 1 ( 支持 3GPP R14 版本定义的 TDD emtc 物理信道及协议栈功能 ) R14 PCT/RCT/RRM SP8630 综合测试系统软件 V1.0 Suite 1 综合测试系统操作管理软件 ( 综合测试系统的用户接口软件, 用于管理系统中的所有设备 创建和运行协议 / 射频 /RRM 等各类测试计划 查看运行 Log 生成 Piece 1 Mandatory PCT/RCT/RRM 测试报告 执行系统校准等 ) NB-IoT 终端协议一致性测试例软件 ( 提供遵循 3GPP 标准规范的 NB-IoT 终端协议一致性 Piece 1 NB-IoT PCT 测试例集合 ) NB-IoT 终端 RF 一致性测试例软件 ( 提供遵循 3GPP 标准规范的 NB-IoT 终端射频一致性 Piece 1 NB-IoT RCT 测试例集合 ) NB-IoT 终端 RRM 一致性测试例软件 ( 提供遵循 3GPP 标准规范的 NB-IoT 终端 RRM 一致 Piece 1 NB-IoT RRM 性测试例集合 ) FDD emtc 终端协议一致性测试例软件 emtc-fdd ( 提供遵循 3GPP 标准规范的 FDD 全双工和 FDD 半双 Piece 1 工 emtc 终端协议一致性测试例集合 ) PCT FDD emtc 终端 RF 一致性测试例软件 emtc-fdd ( 提供遵循 3GPP 标准规范的 FDD 全双工和 FDD 半双 Piece 1 工 emtc 终端射频一致性测试例集合 ) RCT FDD emtc 终端 RRM 一致性测试例软件 emtc-fdd ( 提供遵循 3GPP 标准规范的 FDD 全双工和 FDD 半双 Piece 1 工 emtc 终端 RRM 一致性测试例集合 ) RRM TDD emtc 终端协议一致性测试例软件 emtc-tdd ( 提供遵循 3GPP 标准规范的 TDD emtc 终端协议一致 Piece 1 性测试例集合 ) PCT

21 TDD emtc 终端 RF 一致性测试例软件 ( 提供遵循 3GPP 标准规范的 TDD emtc 终端射频一致性测试例集合 ) Piece 1 emtc-tdd RCT TDD emtc 终端 RRM 一致性测试例软件 ( 提供遵循 3GPP 标准规范的 TDD emtc 终端 RRM 一致性测试例集合 ) Piece 1 emtc-tdd RRM 产品规格 系统服务器 :9kg SP8315: 20.5kg 2 频谱分析仦 : 21kg 信号发生器 : 19.5kg 重量 RFS200: 18kg RFS200-Filter: 15kg Keithley2601B: 5.5kg 总重 ( 包括 37U 机柜 ): < 300kg 系统服务器 :43cm (W) 9cm (H) 38cm (D) SP8315: 42.5cm (W) 21.5cm (H) 52cm (D) 体积机柜 ( 未计入机械臂 ):60cm (W) 185cm (H) 80cm (D) 建议操作空间 :150cm (W) 200cm (H) 250cm (D) 电压和频率 100~240V, 50~60Hz 系统服务器 :300W SP8315: 300W 频谱分析仦 :300W 信号发生器 :300W 额定功率 RFS200: 100W RFS200-Filter: 100W Keithley2601B: 240W 总功率 : < 2500W 工作温度 +10 C ~ +35 C 工作湿度 20% ~ 80% ( 非冷凝 ) N-type female 射频连接器件阻抗 :50Ω nominal 图形用户界面 Windows 7