2/2 way Coaxial Valve CX03M to CX05M direct acting
|
|
|
- Warren Anthony Haynes
- 5 years ago
- Views:
Transcription
1 2/2 way Coaxial Valve CX03M to CX05M direct acting Model code (also example order) CX03M 2/2 D C V Switching function Designation CX03M = CX03M series CX04M = CX04M series CX05M = CX05M series Ways 2/2 = Number of ways NC (closed when de-energised) Control D = Direct Switching function C = NC - closed when de-energised O = NO - open when de-energised* Housing material 2 = Brass (valve), aluminium (block) NO (open when de-energised) Nominal size 10 = DN = DN = DN = DN = DN = DN = DN 50 Order data Nominal size Connection Function NC/NO Operating pressure Flow rate Medium Medium temperature Ambient temperature Supply voltage Number of module blocks If order details or application data are inaccurate or incomplete, there is a risk that the technical configuration of the valves may not be correct for the desired use. This may result in the physical and/or chemical characteristics of the materials or seals used not being adequate for the intended use. Pressure range 040 = CX03 >0-40 bar 064 = CX04 >0-64 bar 100 = CX05 >0-100 bar Connection 014 = G¼ - DN = G⅜ - DN 10, DN = G½ - DN 10, DN 15, DN = G¾ - DN 15, DN 20, DN = G1 - DN 20, DN 25, DN = G1¼ - DN 25, DN = G1½ - DN 32, DN = G2 - DN50 Connection diagram 24V = 24V DC 230V = 230 V AC Hz Special voltage on request *optional 333
2 Technical Data Control 2/2 way valve, direct acting Nominal size DN 10 to DN 50 Pressure range (see table) CX03M 2/2 CX04M 2/2 CX05M 2/2 PN 0 to PN 40 PN 0 to PN 64 PN 0 to PN 100 Connections Valve: G ¼ - G 2 Block: G ½ - G 2½ Housing material Single valve: Block: Brass Aluminium Valve seat (plastic on metal) FKM PTFE CX03M / CX04M CX05M Material of seals Static: Dynamic: FKM PTFE Back-pressure resistant Up to 16 bar Vacuum Leakage rate <10-6 mbar l/s * Media Gaseous, liquid, contaminated Abrasive operating fluids On request Flow direction P A as marked A P max. 16 bar Temperature of medium -10 C to +100 C Ambient temperature -10 C to +50 C Mounting position No orientation restrictions Limit switch Inductive* Fixing Mounting bracket* Electrical part Supply voltage DC: 24 V AC: 230 V Hz Electrical part DC: DC magnet AC: DC magnet with integrated rectifier Connection Connector plug to DIN EN type A Connector plug to DESINA M12x1 * Illuminated plug with varistor * Voltage tolerance + / - 10% to VDE 0580 Duty cycle 100% duty cycle Protection class IP 65 when fitted with connector plug The material specification refers exclusively to the valve connection parts in contact with the medium. *optional The valves are technically configured for specific media and applications. This may result in deviations from the general information given in the data sheet in terms of the design, sealing materials and specifications. Series CX03M CX04M CX05M DN Pressure Connection Kv value Power consumption [W] Weight [bar] [m 3 /h] 24V 230 V 50 Hz [kg] G¼, G⅜, G½ G⅜, G½, G¾ G½, G¾, G G¾, G1, G1¼ G1, G1¼, G1½ G1½ G G¼, G⅜, G½ G⅜, G½, G¾ G½, G¾, G G¾, G1, G1¼ G1, G1¼, G1½ G¼, G⅜, G½ G⅜, G½, G¾ G½, G¾, G G¾, G1, G1¼ G1, G1¼, G1½
3 Section drawing Item Designation Quantity 1 Connection, left 1 2 Block module 2 3 Solenoid armature 2 4 Valve seat 2 5 Solenoid 2 6 Connector plug 2 7 End cap 1 8 Spacer 3 9 Spring 2 10 PTFE rod seal 2 Dimensions DN A B C D E F 10 G½, G¾, G G¼, G⅜, G½ 8 M G½, G¾, G1, G1¼ G⅜, G½, G¾ 8 M G1, G1¼, G1½ G½, G¾, G1 10 M G1, G1¼, G1½ G¾, G1, G1¼ 10 M G1¼, G1½, G G1, G1¼, G1½ 10 M G1½, G2, G2½ G1½ 21 M G1½, G2, G2½ G2 21 M H G L M N R S 335
4 Accessories Separating plate Joining parts Spacer End cap, right End caps End cap, left Connecting block, right Connecting block, left Connecting blocks Connecting block, right Angled version G1 on top DN 10 Connecting block, left Angled version G1 on top DN 10 Reducing adapter Reducing adapter Mounting bracket On request we would be happy to discuss your requirements for further options and accessories. 336
5 Examples of ordering codes Basic valve Connecting block, left -WS-2XL Connecting block, right -WS-2XR Connecting block, left 90 Angled version, outlet on top -WS-2XLO Connecting block, right 90 Angled version, outlet on top -WS-2XRO NOTE The information in this brochure relates to the operating conditions and applications described. For applications and operating conditions not described, please contact the relevant technical department. The operator is always responsible for determining the product suitability for the specific application. Quantified values for product characteristics are average values for a new product that undergo a time deterioration process. Subject to technical modifications and errors. HYDAC Accessories GmbH Hirschbachstr Sulzbach/Saar Tel.: +49 (0) Fax: +49 (0) Internet: info@hydac.com 337
6 338
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
J Series induq VMZ MAGNETIC INDUCTIVE FLOW SENSORS. DB_Magnetic_Inductive_Flow_Sensors 05/2016
J Series induq VMM J Series induq VMI J Series induq VMZ MAGNETIC INDUCTIVE FLOW SENSORS J DB_Magnetic_Inductive_Flow_Sensors 5/216 67 Magnetic inductive flow sensors Principle of operation The smart flow
24000, 3/2 Direct solenoid actuated direct poppet valves
> > Port size: G/4... G / > > Working from 0 bar up > > Suitable for vacuum range down to, 0 - mbar l/s > > 65, Ex em, Ex d (TEX approved, see solenoid operators) > > Suited for outdoor installation Technical
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
11 Product group. Inductive transducers in cylindrical metal housings A WA F A WA X A WD X A WU X
Inductive s in cylindrical metal housings 11 Product group A WA F A WA X A WD X A WU X Application The inductive is a linear displacement measuring system. It can either be fl ange-mounted at a solenoid
INLINE flowmeter for continuous flow measurement
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
Posiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/8" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/8" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Control achieved by applying straight voltage between 0 and 24 VDC
Posiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/4" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
Digital flow ELEMENT transmitter for continuous flow measurement
Digital flow ELEMENT transmitter for continuous flow measurement Type 8036 can be combined with... DN06 to DN65 fluidic process connection Programmable outputs : one or two transistor output(s) and single
INSERTION paddle wheel flowmeter for continuous flow measurement
INSERTION paddle wheel flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both
Digital flow ELEMENT transmitter for continuous flow measurement
ELEMENT Transmitter Digital flow ELEMENT transmitter for continuous flow measurement Type can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor
2/2-Way Solenoid Control Valve
2/2-Way Solenoid Control Valve Excellent range (1:200) Very good response Compact valve design Orifice sizes 0.8... 4 mm Port connection 1/8, 1/4 or sub-base Type 2873 can be combined with Type 8605 Digital
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator ANSI version Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam
Magnetic-inductive flow meter. PITe / UMF2. Technical Datasheet. Maintenance-free Nearly no pressure drop Robust design Easy installation and start-up
Magnetic-inductive flow meter Technical Datasheet PITe / UMF2 Maintenance-free Nearly no pressure drop Robust design Easy installation and start-up Subject to change without notice 1 Function An electrically
SIT 849 SIGMA LH M U LT I F U N C T I O N A L C O N T R O L F O R G A S B U R N I N G A P P L I A N C E. w w w. s i t g r o u p.
SIT 89 SIGMA LH M U LT I F U N C T I O N A L C O N T R O L F O R G A S B U R N I N G A P P L I A N C E 9.955.19 Subject to change without notice Application Domestic gas appliances: central heating boilers,
The EVI 30/8 coils can be equipped with the suitable plunger guide tube (see S8 - S9 Catalogue).
EVI 30 Coil System The EVI 30 system by Amisco includes a wide range of 30mm coils, designed for pneumatic applications. This coil family is available for tubes with 8, 9 and 10mm diameter. The coils are
OPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
Electromagnetic Flow Transmitter
Electromagnetic Flow Transmitter Sensor in solid state technology Working as a transmitter and/or as an On/Off controller Automatic-calibration of full scale: Teach-In Clean in place (CIP) Type can be
Magnetic Inductive Flow Sensors VMI Series
Magnetic Inductive Flow Sensors VMI Series SIKA Dr.Siebert & Kühn GmbH & Co. KG Struthweg 7 9 34260 Kaufungen Germany.: +49 5605 803-0 Fax: +49 5605 803-54 e-mail: info@sika.net www.sika.net Magnetic Inductive
More Precision. mainsensor // Magneto-inductive displacement sensors
More Precision mainsensor // Magneto-inductive displacement sensors 2 Magneto-inductive sensors for non-contact linear displacement measurement mainsensor - Selectable measuring ranges up to 55mm - Linear
Directional valves Electrically operated Series 563, 565, 567. Brochure
Directional valves Electrically operated Brochure 2 Directional valves Electrically operated 3/2-directional valve, Series 563 Qn = 1350 l/min plate connection Electr. connection: Plug, Form B, industry
Magnetic Inductive Flow Sensors induq. Series VMI
Magnetic Inductive Flow Sensors induq Series VMI Free Flow! Compact - cost-effective - robust! The induq from SIKA is a trio of extremly compact, low cost, magnetic inductive fl ow sensors. This new product
Coil. Coil L 12 VDC 135 C 18 W 7.7 Ω M M 24 VDC 135 C 18 W 31 Ω M AMP Junior (AJ variant) Coil
s W COILS Type of protection IP 65 Ambient -30 C 60 C F 0.141 kg 42 12 Ø13.25 30 38.6 ISO 4400 (DIN 43650) 17 21.5 20.5 STANDARD irschmann ISO 4400 DIN43650 L 12 VDC 135 C W 7.7 Ω M14000001 M 24 VDC 135
SM-15. Features. Plastic Flowmeters as per the Variable Area Principle. Description: Application:
/ Flow / Variable Area SM-5 Plastic Flowmeters as per the Variable Area Principle Description: Features / For every industrial application / For fluid and gaseous media / Simple and robust design with
2/2 way Proportional Valve (motordriven)
2/2 way Proportional (motordriven) Actuator isolated from fl ow path Excellent range and fast response times Low power consumption Orifi ce sizes 8 to 25 mm Versions: Standard, positioner, process controller
2-Way Proportional Logic Cartridge Valve Model FE.. (Series 1X and 2X) PSI (315 bar) F with electrical connection 12 X Y
RA 9 /6.98 -Way Proportional Logic Cartridge Valve Model FE.. (Series X and X) Size 6... 6... 6 PSI (5 bar)... 75 GPM (8 L/min) RA 9 /6.98 Replaces: 5.9 Characteristics: Single land throttle valve (main
Accessories for sensors
Accessories for sensors Mounting and installation Adapters for pressure sensors: Hex AF width 27 ZBM 01 Adapter female thread G1/4 male thread G1/2 B, DIN EN 837-1 Part no.: 257276 Flat seal ring Cu 6.2x17.5x2.0
Absolute pressure gauge with output signal For the process industry Models APGT and APGT43.160, NS 100 and 160
Mechatronic pressure measurement Absolute pressure gauge with output signal For the process industry Models APGT43.100 and APGT43.160, NS 100 and 160 k Applications for further approvals see page 4 WIKA
Level switch Nivotemp NT-EL, NT-ELD
Level switch Nivotemp, Fluidcontrol In hydraulics and lubrication technology the fill level of oil tanks needs to be monitored continuously. ere, modern factory automation requires compatible signals.
MBC /602(L) MBC /602(L) MBC /602(L)
GasMultiBloc Combined servo pressure regulator and safety shut-off valves MBC-... 1000/60(L) MBC-... 500/60(L) MBC-... 4000/60(L) Two normally closed automatic shutoff valves and servo regulator in one
Directional valves Coils Series CO1. Brochure
Directional valves Coils Series CO1 Brochure 2 Directional valves Coils Series CO1 Form C, coil kit Coil width 15 mm 3 M8, coil kit Coil width 15 mm 5 form B Coil width 22 mm 7 Form B, industry Coil width
Target disk flowmeter for liquids and gases
Target disk flowmeter for liquids and gases Metallic, simple and robust construction Available for all flow directions Suitable for extreme pressure and temperature conditions Low pressure drop Straight
Target disk flowmeters Series DP Metallic flowmeter for liquids and gases
Target disk flowmeters Series DP Metallic flowmeter for liquids and gases Metallic, simple and robust construction Available for all flow directions Suitable for extreme pressure and temperature conditions
Float Switches with Permanent Magnet For Vertical Installation Model RSM
Level Measurement Float Switches with Permanent Magnet For Vertical Installation Model RSM WIKA Data Sheet LM 30.01 Applications Level measurement for almost all liquid media Pump/level control and monitoring
Directional control valves, direct operated, with electrical position feedback and integrated electronics (OBE)
Directional control valves, direct operated, with electrical position feedback and integrated electronics (OBE) Type 4WRPEH RE 29035 Edition: 2017-04 Replaces: 2015-02 Size 6 Component series 2X Maximum
Limit switch set BOA-H DN PN 16/25 Material variant EN-GJS LT
Assembly instructions 0570.812/04-EN Limit switch set BOA-H DN 15-150 PN 16/25 Material variant EN-GJS-400-18-LT Fig. 1 Exploded view of limit switch set... 2 Fig. 2 Parts list for limit switch set...
Electronic Temperature Transmitters
Electronic Temperature Transmitters ELECTRONIC TEMPERATURE TRANSMITTERS As with the pressure transmitters, HYDAC ELECTRONIC also has temperature transmitters appropriate for every application. The transmitters
OPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
Resistance thermometers for process technology
Data Sheet 90.2820 Page 1/8 Resistance thermometers for process technology for temperatures from -200 to +600 C with protection tubes in stainless steel, titanium, tantalum, Iconel and Hastelloy available
DENISON HYDRAULICS Proportional Pressure Control Valves
DENISON HYDRAULICS Proportional Pressure Control Valves Series 4VP01 Cetop 03 Publ. 3-EN 2200-B, replaces 3-EN 2200-A FEATURES, SYMBOLS x FEATURES Direct operated pressure relief valve for flow up-to max.
DMP 343. Industrial Pressure Transmitter. Without Media Isolation. accuracy according to IEC 60770: 0.35 % FSO. Nominal pressure
DMP 4 Industrial Pressure Transmitter Without Media Isolation accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 0 mbar up to 0... 000 mbar Product characteristics excellent linearity
2-way motor valve. Power consumption. Type 8746 MFC/MFM. Technical data Materials Body Housing Seals 1) Pressure Range 2) < 1 % FS Sensitivity Span
2-way motor valve Actuator isolated from flow path Excellent range and fast response times Low power consumption Orifice sizes 1 to 10 mm Versions: Standard, positioner, process controller and high pressure
4/3 proportional directional valve direct operated, with integrated electronics
4/ proptional directional valve direct operated, with integrated electronics RE 2964/. Replaces: 2.2 /6 Type 4WREEM Sizes 6 and Component series 2X Maximum operating pressure 5 bar Maximum flow: 9 l/min
The transducer component converts the measured signal and displays the actual value.
Digital inductive conductivity transmitter System Integration Provides low Total Cost of Ownership PEEK/PPA version for CIP applications TEACH IN and SIMULATION Function Approval PVDF Version PEEK Version
METRATESTER 5+ Tester for DIN VDE /6.15
3-348-817-03 15/6.15 Applications Electrical safety testing of electrical equipment: per DIN VDE 0701-0702: 2008 by means of measurement of: Protective conductor resistance Insulation resistance Protective
Электромагнитные пропорциональные клапаны Burkert
По вопросам продаж и поддержки обращайтесь: Архангельск (8182)63 90 72 Астана (7172)727 132 Белгород (4722)40 23 64 Брянск (4832)59 03 52 Владивосток (423)249 28 31 Волгоград (844)278 03 48 Вологда (8172)26
DS 400 DS 400. Intelligent Electronic Pressure Switch Completely in Stainless Steel. piezoresistive stainless steel sensor
GmbH Postal address: House address Fon (+49) 0 22 42-870-0 Postbox 26 Löhestr. 7 Fax (+49) 0 22 42-870-20 http: // www.tematec.de 5759 Hennef 577 Hennef e-mail: team@tematec.de Data Sheet Page /5 Intelligent
4/3 Proportional Directional Valve, Size SAE 10
/ Proportional Directional Valve, Size SAE Q max =. gpm [ l/min], p max = psi [ bar] Direct acting, sliding-spool design, with solenoid operation Series PDFC- Description Series PDFC proportional directional
Liquid ring vacuum pumps in compact design
Liquid ring vacuum pumps in compact design SIHI extruvac LEME 13, LEME 155 Pressure range: Suction volume flow: 1 to 113 mbar 3 to 17 m³/h CONSTRUCTION TYPE SIHI liquid ring vacuum pumps are displacement
Digital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Mechatronic pressure measurement. Applications. Special features. Description
Mechatronic pressure measurement Diaphragm pressure gauge with electrical output signal For the process industry High overload safety up to the 10-fold full scale value, max. 40 bar Models PGT43.100 and
Direct Operated Proportional DC Valve Series D1FP
Catalogue HY11-500/UK Characteristics The direct operated control valve D1FP of the nominal size NG0 (CETOP 0) shows extremly high dynamics combined with maximum flow. It is the preferred choice for highest
Type PLC Fitting. Valve for Continuous control. Diaphragm valve. Output
Digital Inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
Glass-fibre-reinforced polycarbonate. Dead zone Adaptive or fixed from % 20 ms. 60 ms. 60 ms. Approx. 1.3 kg. Approx. 0.9 kg. Approx. 5.
General data Mounting On linear actuators On quarter turn actuators ARCA-integrated or to VDI/VDE 3847-1 or IEC 534-6 (NAMUR) Range of stroke: 3... 130 mm Integrated to VDI/VDE 3847-2 or VDI/VDE 3845 Angle
ph or ORP Transmitter
ph or ORP Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlighted display Universal process connection Compatible with 120 mm ph/ ORP probes
Flush pressure transmitter For viscous and solids-containing media Model S-11
Electronic pressure measurement Flush pressure transmitter For viscous and solids-containing media Model S-11 WIKA data sheet PE 81.02 Applications Machine building Hydraulic aggregates General industrial
2-way pilot operated solenoid valves for water, hot water and steam
2-way pilot operated solenoid valves for water, hot water and steam Catalogue 8658/GB NEW Also available with ATEX Explosion-proof electrical parts Technical specifications General description Applications
FAS 10 mm PICOSOL Direct acting solenoid valve
FS 0 mm PICOSOL > > /, /; Manifold mounting > > Long life 00 million cycles > > Compact Design > > Low power consumption Technical features Medium: ir, oxygen, neutral gases (0 %... 9 % humidity, non condensing),
Pressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
OEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted
Electrical temperature measurement OEM miniature resistance thermometer Models TR31-3 and TR31-K, thread-mounted WIKA data sheet TE 60.31 Applications Machine building, plant and vessel construction Propulsion
Content. Flow meter F2-UN. Description Technical Data Dimension drawings Operation... 8 Mounting instructions...
Flow meter Content F2-UN Description... 3 Technical data... 4 Dimension drawings... Operation... 8 Mounting instructions... 9 Order code... 10 F1-FP Description... 11 Technical Data... 12 Dimension drawings...
Engineering Support for the Design of Electrohydraulic Drive Systems.
Engineering Support for the Design of Electrohydraulic Drive Systems. Engineering Support. Designing electrohydraulic drive systems requires optimum coordination between hydraulic, electronic and mechanical
TIDALFLUX 2300 F Technical Datasheet
Technical Datasheet Electromagnetic flow sensor for partially filled pipes Measurement in partially filled pipes up to DN1600 / 64" Patented, non-contact level measurement Measurement possible down to
Magnetic level switches ERH-xx-20
edit. II 2015/ page 5 Magnetic level switches ERH-xx-20 Description 3 Level signalling of the medium having minimum density 0,70 g/cm. The basic version, mounted from the top, is available with 92x92mm
Proportional Directional Control Valves Size 6
Proportional Directional Control Valves Size 6 Direct controlled, electrically adjustable Interface to DIN 2 30 and ISO 0 PN [p max. ] = 35 bar 750055.06.02.06 Description (standard units) Design The proportional
Level gauges Series LT Level indicator, switch and transmitter for liquids
Level gauges Series LT Level indicator, switch and transmitter for liquids Simple construction Resistant under extreme temperature and pressure conditions No risk of leakage Excellent chemical resistance
DZD 92 L. Wiring diagram. Time domains. Function. Dimensional drawing. Indicators. Accessories
DZD 92 L Multi-Function - Multi-domain time relay Mono voltage 8 Functions Setting range 0.05 s to 100 h subdivided into 7 time domains 1 immediate-action and 1 time contact or 2 time contacts (adjustable)
Intrinsically safe pressure transmitter For applications in hazardous areas Models IS-20-S, IS-21-S, IS-20-F, IS-21-F
Replacement product: Model IS-3 Electronic pressure measurement Intrinsically safe pressure transmitter For applications in hazardous areas Models IS-20-S, IS-21-S, IS-20-F, IS-21-F WIKA data sheet PE
Electronically controlled proportional pressure regulating valves
Overview Description airfit control Electronically valve G1/4, G3/8, Type SRE-.. airfit control Electronically valve G3/8, G1/2, Type CRE-.. airfit control Electronically valve G3/4, G1, Type A25RE-..
Operating Manual * * Differential pressure transmitter. Table of Contents. 1 Safety guidelines. 1.1 General Information
*09005137* BA_EN_DE50 Rev.A 11/12 *09005137* d e v e l o p i n g s o l u t i o n s DE50 Operating Manual Differential pressure transmitter Table of Contents 1 Safety guidelines 2 Application purpose 3
Proportional rotary solenoid G DR
Proportional rotary solenoid 6 Product group G DR Function Proportional Rotary Solenoid Linear torque vs. rotation angle characteristic Constant torque in the operating range Proportional behaviour between
SOLENOIDS, COILS & ACCESSORIES Product Index
SOLENOIDS, COILS & ACCESSORIES Product Index Description Series Page Coil identification Catalogue numbers of replacement coils SOLENOID OPERATORS Solenoid s, description and dimensions V1100-2/3 V1100-4..6
Data sheet. P3 Top Class BlueLine. P3MBP BlueLine. Ultra-high pressure transducers to 15,000 bar. Special features
Ultra-high pressure transducers to 1,000 bar Data sheet Special features P Top Class BlueLine PMBP BlueLine - For static and dynamic pressure variance, pressure peaks and pressure fluctuations - Principle
Proportional Directional Control Valves Nominal sizes 16 and 25
Proportional Directional Control Valves Nominal sizes 16 and 25 Pilot operated, electrically adjustable Interface acc. to DIN 24 340 and ISO 4401 PN [p max. ] = 315 bar 7502968.06.01.06 Description Design
Conductivity Transmitter
Conductivity Transmitter Programmable outputs: two transistor and single or dual analog 4-20 ma Removable backlighted display Universal process connection Type can be combined with... Three cell constants
VNR- 0 VNR - I - Check Valve
Last update: 20/04/18 VNR- 0 VNR - I - Check Valve Flow regulating valve. Allows a one-way flow, preventing the back flow. Technical manual: E 201 60.2030.00 VNR-I G 1/4 FF sst Ai 303 DN8 60.2040.00 VNR-O
OEM radar transmitter, for aggressive media level measurement
OEM radar transmitter, for aggressive media level measurement C ompact for level measurement up to 20 m 4... 20 ma/hart - 2 wires Adjustable with P C ATEX approvals Type 8136 can be combined with... Type
Digital amplifier for proportional valves PEM XD
Digital amplifier for proportional valves PEM XD FEATURES - Amplifier for cap rail mounting according to DIN EN 50022 - Control of 2 coils in open loop, or 2 proportional valves with 1 coil in open loop
Speed sensors for general applications:
Speed Senss speed senss The contact-free speed senss of the HSS series detect the movement of ferromagnetic structures, such as gear wheels, gear rims perfated discs, using the changes in magnetic flux.
OPTIFLUX 1000 Technical Datasheet
OPTIFLUX 1000 Technical Datasheet Electromagnetic flow sensor in sandwich design Lightweight and compact Excellent price performance ratio Quick and easy to install The documentation is only complete when
Plug-in amplifier. Table of contents. Features. RE 30264/07.12 Replaces: Type VT-SSPA1. Component series 2X 1/8
Plug-in amplifier RE 30264/07.12 Replaces: 03.10 1/8 Type VT-SSPA1 Component series 2X Table of contents Contents Page Features 1 Ordering code, accessories 2 Function 3 Connections and adjustment 3 Block
Float switch For industrial applications, plastic version Model RLS-2000
Level measurement Float switch For industrial applications, plastic version Model RLS-2000 WIKA data sheet LM 50.04 Applications Level measurement of liquids in machine building Control and monitoring
Capacitive levels controllers
Capacitive levels controllers for automatic control, regulation and signalling of levels of conductive and non-conductive liquids or pourable bulk goods Jola Spezialschalter GmbH & Co. KG Klostergartenstr.
Proportional Directional Control Valves Size 6
Proportional Directional Control Valves Size 6 Direct operated, positioncontrolled Interface to DIN 2 30 and ISO 0 PN [p max. ] = 35 bar 75079.06.03.06 Description (standard units) Design The proportional
Glass-fibre-reinforced polycarbonate. Dead zone Adaptive or fixed from % 1.5 s adjustable. 20 ms. 60 ms. 60 ms. Approx. 1.
General data Mounting On linear actuators On quarter turn actuators ARCA-integrated or to VDI/VDE 3847-1 or IEC 534-6 (NAMUR) Range of stroke: 3... 130 mm Integrated to VDI/VDE 3847-2 or VDI/VDE 3845 Angle
OPTIMASS 1000 Technical Datasheet
OPTIMASS 1000 Technical Datasheet Sensor for mass flow First choice for universal applications Best price-performance ratio A wide range of options available with no restrictions The documentation is only
FLOMID FX Electromagnetic Flowmeter
FLOMID FX Electromagnetic Flowmeter Working pressure manufacturing according to PED 97/23/CE (Lloyd s Register Certificate Nº 031) Introduction Modular design in two versions: Compact, sensor and electronics
Inductive Standard Displacement Transducers
WA Inductive Standard Displacement Transducers Special features - Available as displacement probe or with detachable plunger - Good thermal stability in the event of temperature gradients - Space saving,
Flow Measurement SITRANS F M
Overview Mode of operation The flow measuring principle is based on Faraday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to
METRISO. Analog Insulation, Low Resistance and Voltage Measurement Instrument /9.14
3-349-813-3 1/9.14 Insulation measurement per EN 61557-2/VDE 413, part 2 Test voltages: 5 V, 1 V, 25 V, 5 V and 1 V Analog display of measured values and limit values Intelligent filter precise and measurement-dependent
Process transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm
Electronic pressure measurement Process transmitter Model UPT-20, with pressure port Model UPT-21, with flush diaphragm WIKA data sheet PE 86.05 Applications Process technology Machine building and plant
BATCHFLUX 5500 C Technical Datasheet
BATCHFLUX 5500 C Technical Datasheet Electromagnetic flowmeter for volumetric filling machines High-stability ceramic measuring tube, therefore extremely long-term stability Optimum hygienic design Only
SECULIFE SR PC Controllable Instrument for Measuring Safety-Relevant Characteristic Values of Electrical Devices /2.
3-349-443-03 3/2.12 Applications Testing for the Electrical Safety of Electrical Medical Devices in Accordance with the German Medical Product Law (MPG) / MDD The test instrument is used for quick and
Drive Electronics pq11
Drive Electronics Plug-in type amplifier with constant current controller for proportional valves Control of one solenoid Easy mounting directly on valve body Standard voltage and current signals for setpoint
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors M-Series Mobile Hydraulic in-cylinder Sensor Model MH PWM Output Data Sheet SENSORS Document Part Number 551119 Revision B M-Series
T10F. Data Sheet. Torque Flange. Special features. Installation example T10F. B en
T10F Torque Flange Data Sheet Special features Extremely short design High permissible dynamic loads High permissible transverse forces and bending moments Very high torsional stiffness Contactless Selectable
DUK COMPACT ULTRASONIC FLOWMETER
DUK COMPACT ULTRASONIC FLOWMETER Flow Pressure Level Temperature Measurement Monitoring Control Measuring Ranges: 0.0- GPM to 0.6-60 GPM Accuracy: ±. % of F.S. Turndown Ratio: 0: P max : 30 PSI; T max
Miniature resistance thermometer Explosion-protected version Model TR34, thread-mounted
Electrical temperature measurement Miniature resistance thermometer Explosion-protected version Model TR34, thread-mounted WIKA data sheet TE 60.34 Applications Machine building, plant and vessel construction
Inductive Analog-Sensors
SENSOREN FÜR AUTOMATION Inductive Analog-Sensors Item group 260 Non-contacting measurement of distance and position -Distance -Displacement -Position -Edge guiding -Concentricity -Centering -Sorting -Counting
Flow Measurement SITRANS F M. Transmitter TRANSMAG 2 with sensor 911/E 4/101. Overview
Siemens AG 2010 Flow Measurement Overview Design The complete flowmeter consists of a flow sensor and an associated transmitter from the TRANSMAG 2 for pulsed alternating field. These are available as