RADIOCOMMUNICATIONS TESTING

Size: px

Start display at page:

Download "RADIOCOMMUNICATIONS TESTING"

Neil Houston
5 years ago
Views:

1 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Telephone: (852) Facsimile: (852) RADIOCOMMUNICATIONS TESTING NPD LTD R WALKIE TALKIES : TEST ENGINEER : REPORT APPROVED BY : DATE : Li Ka Wa, Henry Assistant Engineer Wong Kwok Yeung, Kenneth Senior Lead Engineer 17 Jul 2017 Signed On File Intertek s standard Terms and Conditions can be obtained at our website The test report only allows to be revised within the retention period unless further standard or the requirement was noticed This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program Intertek Page 1 of 28

2 RADIO PERFORMANCE MEASUREMENTS RESULT SUMMARY ETSI EN ETSI EN CLAUSE NUMBER COMPLIANCE Operating Frequency Complied Effective Radiated Power Complied Unwanted emissions in the spurious domain (Transmitter Portion) Unwanted emissions in the spurious domain (Receiver Portion) Complied Complied Adjacent Channel Power Complied TX behaviour Under Low voltage Conditions Complied Transient Power Complied Blocking Complied Occupied Bandwidth Complied Duty Cycle Complied 1. When determining of the test conclusion, the Measurement Uncertainty of test has been considered. 2. This test report is issued to the Company indicated based on the request of the Applicant of the product mentioned in this report. Page 2 of 28

3 EQUIPMENT UNDER TEST (EUT) INFORMATION Company: Manufactuer: Description of EUT: Type Number(s): Serial Number(s): Room 506, Chinachem Golden Plaza, 77 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong. Dongguan Meili Electronic Ltd. Walkie Talkies (73020R, 73020R(B), 73050, 73050B), Adventurer Walkie Talkies (73020G), Walkie Talkies Playset (73120, 73122), Adventurer Walkie Talkies Playset (73120G, 73122G), Policeforce Walkie Talkies Playset (73123, 73124), Firefighter Walkie Talkies Playset (73128, 73129) 73020R Additional Model: 73020R(B), 73050, 73050B, 73020G, 73120, 73122, 73120G, 73122G, 73123, 73124, 73128, Not Labelled Equipment Received: 28 Jun 2017 Test Date(s): 28 Jun 2017 to 30 Jun 2017 Size of EUT : 3 (cm) x 6 (cm) x 14 (cm) Type of EUT: Transceiver (half duplex) Walkie Talkie Receiver category of EUT: Receiver category 3 Temperature Category of EU: Type of Modulation: Category I (General) : 20 C to +55 C Amplitude Modulation Test Specification(s): ETSI EN : V3.1.1 ( ) ETSI EN : V3.1.1 ( ) Page 3 of 28

4 CONTENTS EXHIBIT 1 GENERAL DESCRIPTION 5 1 INTRODUCTION 5 2 TEST SPECIFICATION 5 EXHIBIT 2 TEST RESULT OF RADIO PERFORMANCE MEASUREMENTS 7 3 EFFECTIVE RADIATED POWER (ERP) AND SPURIOUS EMISSIONS 7 4 OPERATING FREQUENCY 12 5 ADJACENT CHANNEL POWER 14 6 FREQUENCY STABILITY UNDER LOW VOLTAGE CONDITIONS 17 7 TRANSIENT POWER 19 8 BLOCKING 22 9 OCCUPIED BANDWIDTH DUTY CYCLE 27 EXHIBIT 3 PHOTOS OF EUT EUT PHOTOS 28 Page 4 of 28

5 EXHIBIT 1 GENERAL DESCRIPTION EXHIBI 1 GENERAL DESCRIPTION 1 INTRODUCTION Intertek Testing Services Hong Kong Limited (Intertek) has tested the 73020R Walkie Talkies. The sample was tested to the relevant performance specification published by the European Telecommunications Standards Institute. This report contains the results of these tests and is submitted to as the final test results. The Model : 73020R(B), 73050, 73050B, 73020G, 73120, 73122, 73120G, 73122G, 73123, 73124, 7312 and are the same as the Model : 73020R in hardware aspect. The models are difference in body color design, model number, packaging artwork and the accessories that packed together with the product only. The production units are required to conform to the initial sample as received when the units are placed on the market. 2 TEST SPECIFICATION 2.1 RELEVANT PERFORMANCE SPECIFICATION The relevant performance specifications for 73020R Walkie Talkies are ETSI EN V3.1.1 ( ). The harmonised standards are ETSI EN V3.1.1 ( ). The tests performed are those required to demonstrate compliance with the essential requirements of Article 3.2 of the Radio Equipment Directive RED for regulatory purposes. 2.2 TEST ENVIRONMENT The tests were performed in the Radiocommunications Test Facility at Intertek laboratory in Hong Kong. The sample was subjected to the ambient conditions in the laboratory and indoor test site except during tests at extremes of temperatures and the Radiated Emissions Tests. The temperature and relative humidity recorded during the period of each test are given in the results. 2.3 CONFIGURATION OF TEST SAMPLE The test sample consisted of two transceivers. Page 5 of 28

6 2.4 TEST POWER SOURCES The sample of transceiver (WALKIE TALKIE) is intended to operate from battery DC 9.0V (1 x 9.0V Alkaline battery). The test power source voltage declared by the manufacturer were: Nominal test voltage 9.00VDC Lower extreme test voltage 7.65VDC Upper extreme test voltage 9.00VDC 2.5 TEST FREQUENCIES The nominal operating frequency MHz at 9.00VDC. 2.6 MEASUREMENT UNCERTAINTY All measurement uncertainties stated in this report are estimated to a 95% confidence level. 2.7 SUPPORT EQUIPMENT RADIO PERFORMANCE MEASUREMENTS None. 2.8 SUPPORT EQUIPMENT EMC COMPLIANCE MEASUREMENTS None. Page 6 of 28

7 EXHIBIT 2 TEST RESULT OF RADIO PERFORMANCE MEASUREMENTS 3 EFFECTIVE RADIATED POWER (ERP) AND SPURIOUS EMISSIONS 3.1 TEST METHOD AND SUMMARY Effective Radiated Power (ERP) Basic Standard : ETSI EN V3.1.1 ( ) Spurious Emissions Clause : Application : Transmitter with an Integral or Dedicated Antenna All Transmitters All Receivers 3.2 TEST SETUP 1.0~4.0 Antenna Tower E U T 3m Receiver Antenna 1.5m Ground Plane 3m Chamber RF Test Receiver Test setup of radiated emissions of 25MHz to 1GHz 1.0~4.0 Antenna Tower E U T 3m Receiver Antenna 1.5m Ground Plane 3m Chamber RF Test Spectrum Analyzer Test setup of radiated emissions above 1GHz Page 7 of 28

8 3.3 EQUIPMENT LIST EQUIPMENT NO. EQUIPMENT MANUFACTURER DATE NEXT DUE DATE EW 1015 Double Ridged Guide Antenna EMCO 26 Apr Oct 17 EW 1983 Signal Generator (250kHz to 40GHz) AGILENTTECH 25 May May 18 EW 3095 EMI Test Receiver R&S 25 Sep Oct 17 EW 3281 Spectrum Analyzer 40GHz ROHDESCHWARZ 19 Dec Dec 17 EW 3061 BiConiLog Antenna EMCO 23 Sep Sep 17 EW 1133 Double Ridged Guide Antenna EMCO 05 Nov Nov 17 EW m Double Shield RF Cable (20MHz 6GHz) RADIALL 26 Jul Jul 17 EW metre RF Cable 40GHz GREATBILLION 24 Nov Nov 17 Page 8 of 28

9 3.4 TEST RESULT EFFECTIVE RADIATED POWER (ERP) TRANSMITTER PORTION Test Conditions: Temperature 25 C; Humidity 69% -30 EN TX -40 Level in dbm M M G 2G 3G 4G Frequency in Hz Frequency (MHz) MaxPeak (dbm) Limit (dbm) Margin (db) Height (cm) Pol Azimuth (deg) Corr. (db) V Notes: 1. Negative sign ( ) in the margin column signify levels below the limit dbm corresponds to 10 mw. 3. Measurement uncertainty is ± 5.3 db at a level of confidence of 95%. Page 9 of 28

10 3.5 TEST RESULT SPURIOUS EMISSIONS (TRANSMITTER PORTION) CONDUCTED Not applicable. Equipment has integral antenna RADIATED SPURIOUS EMISSIONS OPERATING Test Conditions: Temperature 25 C; Humidity 69% -30 EN TX -40 Level in dbm M M G 2G 3G 4G Frequency in Hz Frequency (MHz) MaxPeak (dbm) Limit (dbm) Margin (db) Height (cm) Pol Azimuth (deg) Corr. (db) V V V V H Notes: 1. Negative sign ( ) in the margin column signify levels below the limit. 2. Other emissions found were at least 10 db below the limit dbm corresponds to 4 nw dbm corresponds to 20 nw dbm corresponds to 250 nw dbm corresponds to 1000 nw. 7. Measurement uncertainty is ± 5.3 db at a level of confidence of 95% SPURIOUS EMISSIONS STANDBY There were no emissions found above system measuring level (at least 10 db below the limit). Page 10 of 28

11 3.6 TEST RESULT SPURIOUS EMISSIONS (RECEIVER PORTION) CONDUCTED Not applicable. Equipment has integral antenna RADIATED SPURIOUS EMISSIONS OPERATING Test Conditions: Temperature 25 C; Humidity 69% -45 EN Rx Level in dbm M M G 2G 3G 4G Frequency in Hz Frequency (MHz) MaxPeak (dbm) Limit (dbm) Margin (db) Height (cm) Pol Azimuth (deg) Corr. (db) V V V H H H Notes: 1. Negative sign ( ) in the margin column signify levels below the limit. 2. Other emissions found were at least 10 db below the limit dbm corresponds to 2 nw dbm corresponds to 20 nw. 5. Measurement uncertainty is ± 5.3 db at a level of confidence of 95%. Page 11 of 28

12 4 OPERATING FREQUENCY 4.1 TEST METHOD AND SUMMARY Basic Standard : ETSI EN V3.1.1 ( ) Clause : Application : 4.2 TEST SETUP all transmitters Spectrum Analyzer EUT DC Power Supply Test Fixture with receive antenna Temp. Chamber 4.3 EQUIPMENT LIST EQUIPMENT NO. EQUIPMENT MANUFACTURER DATE NEXT DUE DATE EW 2395 Temperature & Humidity Chamber GIANT FORCE 26 Sep 16 4 Sep 17 EW 2260 Spectrum Analyzer R&S 20 Jul Jul 17 EW 2669 DC Power Supply GW 25 Jan 11 Nil * * The Equipment would be verified together with the test system before testing. Page 12 of 28

13 4.4 TEST RESULT FREQUENCY FREQUENCY FREQUENCY TEST CONDITIONS (MHz) DRIFT (Hz) ERROR LIMIT (Hz) Nominal frequency stated by the manufacturer: MHz H nom 50% V DC nom Within assigned T nom 25 o C 9.00V frequency band RESULT Complied Operational Frequency Band Nominal Operating Frequency Operating Channel Width OCW Note: VALUE MHz MHz 20 khz 1. F L error is the lowest measured frequency and F H error is the highest measured frequency of the transmitter under normal and extreme test conditions. 2. Assigned frequency band is MHz. 3.. Measurement uncertainty is ± 17 Hz at a level of confidence of 95%. Page 13 of 28

14 5 ADJACENT CHANNEL POWER 5.1 TEST METHOD AND SUMMARY Basic Standard : ETSI EN V3.1.1 ( ) Clause : Application : 5.2 TEST SETUP all transmitters with OCW 25 khz Spectrum Analyzer EUT DC Power Supply Test Fixture with receive antenna Temp. Chamber 5.3 EQUIPMENT LIST EQUIPMENT NO. EQUIPMENT MANUFACTURER DATE NEXT DUE DATE EW 2395 Temperature & Humidity Chamber GIANT FORCE 26 Sep 16 4 Sep 17 EW 2260 Spectrum Analyzer R&S 20 Jul Jul 17 EW 2669 DC Power Supply GW 25 Jan 11 Nil * * The Equipment would be verified together with the test system before testing. Page 14 of 28

15 5.4 TEST RESULT TEST RESULT DC TEST VOLTAGE Adjacent Channel Power TEST ADJACENT CONDITIONS CHANNEL OCW = 20kHz V nom : 9.00V T nom : 25 C RH nom : 50% V upper : 9.00V T max : 55 C RH max : 50 % V lower : 7.65V T max : 55 C RH max : 50 % V upper : 9.00V T min : 20 C V lower : 7.65V T min : 20 C ATTENUATION (dbc) ADJACENT CHANNEL POWER (dbm) LIMIT (dbm) RESULT Lower Complied Upper dbm Complied Lower Complied Upper Complied Lower Complied Upper dbm Complied Lower Complied Upper Complied Lower Complied Upper Complied Alternate Adjacent Channel Power TEST ADJACENT CONDITIONS CHANNEL OCW = 20kHz V nom : 9.00V T nom : 25 C RH nom : 50% V upper : 9.00V T max : 55 C RH max : 50 % V lower : 7.65V T max : 55 C RH max : 50 % V upper : 9.00V T min : 20 C V lower : 7.65V T min : 20 C ATTENUATION (dbc) ADJACENT CHANNEL POWER (dbm) LIMIT (dbm) RESULT Lower Complied Upper dbm Complied Lower Complied Upper Complied Lower Complied Upper dbm Complied Lower Complied Upper Complied Lower Complied Upper Complied Page 15 of 28

16 Frequency Error TEST CONDITIONS FREQUENCY (MHz) FREQUENCY DRIFT (Hz) Nominal frequency stated by the manufacturer: MHz H nom 50% V DC nom T nom 25 o C 9.00V T nim 20 o C H nim 0% T max 55 o C H max 50% V DC nom 9.00V V DC nom 7.65V V DC nom 9.00V V DC nom 7.65V Remark: 37.0 dbm corresponds to 0.2 μw 32.0 dbm corresponds to 0.63 μw 40.0 dbm corresponds to 0.1 μw Note: 1. 20kHz of OCW is defined. 2. Measurement uncertainty is ±3.0dB at a level of confidence of 95%. 3. Frequency error measurement procedure only applies if the EUT can generate an unmodulated carrier. Page 16 of 28

17 6 FREQUENCY STABILITY UNDER LOW VOLTAGE CONDITIONS 6.1 TEST METHOD AND SUMMARY Basic Standard : ETSI EN V3.1.1 ( ) Clause : Application : 6.2 TEST SETUP Battery Operated Transmitter Frequency Meter/spectrum Analyzer EUT DC Power Supply Test Fixture with receive antenna 6.3 EQUIPMENT LIST EQUIPMENT NO. EQUIPMENT MANUFACTURER DATE NEXT DUE DATE EW 2395 Temperature & Humidity Chamber GIANT FORCE 26 Sep 16 4 Sep 17 EW 2260 Spectrum Analyzer R&S 20 Jul Jul 17 EW 2669 DC Power Supply GW 25 Jan 11 Nil * * The Equipment would be verified together with the test system before testing. Page 17 of 28

18 6.4 TEST RESULT Test Conditions: Ambient Notes: BELOW LOWER EXTREME TEST VOLTAGE (V) FREQUENCY (MHz) FREQUENCY DRIFT (Hz) LIMIT (Hz) RESULT ±5000 Complied ±5000 Complied ±5000 Complied ±5000 Complied 1. When the test voltage is below 2.07VDC, the effective radiated power of the transmitter is below the spurious emission limit kHz of Channel Spacing is defined. 3. The Assigned Frequency Band: MHz. 4. Measurement uncertainty is ± 17 Hz at a level of confidence of 95%. Page 18 of 28

19 7 TRANSIENT POWER 7.1 TEST METHOD AND SUMMARY Basic Standard : ETSI EN V3.1.1 ( ) Clause : Application : 7.2 Test Setup All transmitters 1.0~4.0 Antenna Tower E U T 3m Receiver Antenna 1.5m Ground Plane 3m Chamber RF Test Receiver Page 19 of 28

20 7.3 EQUIPMENT LIST EQUIPMENT NO. EQUIPMENT MANUFACTURER DATE NEXT DUE DATE EW 1015 Double Ridged Guide Antenna EMCO 26 Apr Oct 17 EW 1983 Signal Generator (250kHz to 40GHz) AGILENTTECH 25 May May 18 EW 3095 EMI Test Receiver R&S 25 Sep Oct 17 EW 3281 Spectrum Analyzer 40GHz ROHDESCHWARZ 19 Dec Dec 17 EW 3061 BiConiLog Antenna EMCO 23 Sep Sep 17 EW 1133 Double Ridged Guide Antenna EMCO 05 Nov Nov 17 EW m Double Shield RF Cable (20MHz 6GHz) RADIALL 26 Jul Jul 17 EW metre RF Cable 40GHz GREATBILLION 24 Nov Nov 17 TRANSIENT POWER EQUIPMENT LIST WILL BE THE SAME AS 3.3 EQUIPMENT LIST Page 20 of 28

21 7.4 TEST RESULT MEASUREMENT POINTS: OFFSET FROM CENTRE FREQUENCY 0,5 x OCW 3 khz:* + 0,5 x OCW + 3 khz:* max (12,5 khz, OCW): MHz + max (12,5 khz, OCW): MHz 0,5 x OCW 400 khz: MHz 0,5 x OCW khz: MHz 0,5 x OCW khz: MHz 0,5 x OCW kHz: MHz *Not applicable for OCW <25kHz For MHz ANALYSER RBW (khz) LIMIT (dbm) TRANSIENT POWER (dbm) RESULT 1 0 N/A Complied Max (RBW pattern 1/3/10) Offset frequency/6 = Complied Complied Complied 7.5 LIMIT: Absolute offset from centre frequency 2. RBW REF Peak power limit applicable at measurement points 400 khz 1 khz 0 dbm > 400 khz 1 khz 27 dbm Note: 1. Measurement uncertainty is ± 5.3dB at a level of confidence of 95% khz of OCW is defined. Page 21 of 28

22 8 BLOCKING 8.1 TEST METHOD AND SUMMARY Basic Standard : ETSI EN V3.1.1 ( ) Clause : Application : 8.2 TEST SETUP All category of receiver 1.0~4.0 Antenna Tower EU T 3m Transmit Antenna 1.5m Ground Plane Signal generator A & Signal Generator B Page 22 of 28

23 8.3 EQUIPMENT LIST EQUIPMENT NO. EQUIPMENT MANUFACTURER DATE NEXT DUE DATE EW 1750 Programming Step Attenuator AGILENTTECH 11 Oct Oct 17 EW 1753 Programming Step AGILENTTECH Attenuator 12 Oct Oct 17 EW 1754 Attenuator Switch AGILENTTECH Driver 12 Oct Oct 17 EW 2839 Spectrum Analyzer (9kHz to 13GHz) ROHDESCHWARZ 27 Jan Jan 18 EW 1244 Signal Generator HP 21 Sep Aug 17 EW 3085 Splitter 2 (27MHz to 868MHz) MINICIRCUITS 22 Nov Nov 17 EW 3078 Splitter MINICIRCUITS 22 Nov Oct 17 EW 3045 Digital Thermohygrometer OREGON 26 Jul Jul 17 Page 23 of 28

24 8.4 TEST RESULT Test Frequency Offest (MHz) (OCW: 20kHz) (Centre Frequency: MHz) OC Egde +/ 2MHz OC Egde +/ 10MHz MAX (+/ 5% of FCentre or +/ 15 MHz) Note: Unwanted Emission Power Level (dbm) Limit Result Lower: Complied 80 dbm Upper: Complied Lower: >8.27 Complied 60 dbm Upper: >7.83 Complied Lower: >9.35 Complied 60 dbm Upper: >8.44 Complied 1. Measurement uncertainty is ± 3.0dB at a level of confidence of 95%. Page 24 of 28

25 9 OCCUPIED BANDWIDTH 9.1 TEST METHOD AND SUMMARY Basic Standard : ETSI EN V3.1.1 ( ) Clause : Application : 9.2 TEST SETUP All transmitter Spectrum Analyzer EUT DC Power Supply Test Fixture with receive antenna Temp. Chamber 9.3 EQUIPMENT LIST EQUIPMENT NO. EQUIPMENT MANUFACTURER DATE NEXT DUE DATE EW 2395 Temperature & Humidity Chamber GIANT FORCE 26 Sep 16 4 Sep 17 EW 2260 Spectrum Analyzer R&S 20 Jul Jul 17 EW 2669 DC Power Supply GW 25 Jan 11 Nil * * The Equipment would be verified together with the test system before testing. Page 25 of 28

26 9.4 TEST RESULT H nom 50% T nom 25 o C T min 20 o C H min 0% T max 55 o C H max 50% OCCUPIED BANDWIDTH (khz) V DC nom 9.00V V DC max 9.00V V DC min 7.65V V DC max 9.00V V DC min 7.65V MAXIMUM OCCUPIED BANDWIDTH (khz) LIMIT OF OC(kHz) Nominal frequency stated by the manufacturer: MHz RESULT kHz Complied Test environment Normal or extreme conditions Test signal The test signal used. See Table 3 Centre Frequency The highest or lowest operating frequency as declared by the manufacturer and any other frequencies used in the test case Occupied Bandwidth The value measured with the spectrum analyzer Highest measured OBW value or if the measurement is only performed Maximum Occupied Bandwidth at normal temperature conditions, the upper and lower frequency error results have to be added and subtracted to measured OBW to calculate the Maximum Occupied Bandwidth Note: 20kHz of OC is defined. Page 26 of 28

27 10 DUTY CYCLE 10.1 TEST METHOD AND SUMMARY Basic Standard : ETSI EN V3.1.1 ( ) Clause : Application : 10.2 TEST SETUP All transmitter Spectrum Analyzer EUT DC Power Supply Test Fixture with receive antenna Temp. Chamber 10.3 EQUIPMENT LIST EQUIPMENT NO. EQUIPMENT MANUFACTURER DATE NEXT DUE DATE EW 2395 Temperature & Humidity Chamber GIANT FORCE 26 Sep 16 4 Sep 17 EW 2260 Spectrum Analyzer R&S 20 Jul Jul 17 EW 2669 DC Power Supply GW 25 Jan 11 Nil * * The Equipment would be verified together with the test system before testing TEST RESULT The duty cycle is simply the on time divided by the period: T on time = 1ms T obs = 1ms DCT= T on time / T obs *100% = 100% Page 27 of 28

28 EXHIBIT 3 PHOTOS OF EUT 11 EUT PHOTOS EXTERNAL PHOTO Page 28 of 28

29 POINTS TO NOTE 1) Labelling/ Marking/Instruction Information Manufacturers shall ensure that radio equipment which they have placed on the market bears a type, batch or serial number or other element allowing its identification, or, where the size or nature of the radio equipment does not allow it, that the required information is provided on the packaging, or in a document accompanying the radio equipment Manufacturers and Importers shall indicate on the radio equipment their name, registered trade name or registered trade mark and the postal address at which they can be contacted or, where the size or nature of radio equipment does not allow it, on its packaging, or in a document accompanying the radio equipment. The address shall indicate a single point at which the manufacturer can be contacted. The contact details shall be in a language easily understood by end users and market surveillance authorities. Manufacturers and Importers shall ensure that the radio equipment is accompanied by instructions and safety information in a language which can be easily understood by consumers and other end users, as determined by the Member State concerned. Instructions shall include the information required to use radio equipment in accordance with its intended use. Such information shall include, where applicable, a description of accessories and components, including software, which allow the radio equipment to operate as intended. Such instructions and safety information, as well as any labelling, shall be clear, understandable and intelligible. The following information shall also be included in the case of radio equipment intentionally emitting radio waves: (a) frequency band(s) in which the radio equipment operates; (b) maximum radio frequency power transmitted in the frequency band(s) in which the radio equipment operates.

30 POINTS TO NOTE 2) Declaration of conformity There are many Directives and Standards in place, and you should assure yourself that the correct ones have been applied to your product. The attached blank Declaration of Conformity complies with the format published in the Official Journal of the European Community. To complete the form: 1. List all applicable Directives, by number. e.g. 88/378/EEC 2014/30/EU 2014/35/EU 93/68/EEC 2014/53/EU for Toy Directive for EMC Directive for Low Voltage Directive for CE Marking Directive for Radio Equipment Directive 2. List the relevant harmonised standards under these Directives to which conformity is being declared. Intertek Testing Services test report(s) which you should retain to support your declaration contain this information. 3. Add manufacturer's or authorised representative's name and address. The authorised representatives should be located within the EU. 4. Specify the product, type, batch or serial number of equipment. 5. The Declaration of Conformity should be signed by the manufacturer or his authorized representative established within the EU. NOTES: A. THE IMPORTERS, MANUFACTURERS OR AUTHORIZED REPRESENTATIVE MUST KEEP THE DECLARATION OF CONFORMITY AND THE S AT THE DISPOSAL OF THE AUTHORITIES FOR A PERIOD OF TEN YEARS AFTER THE EQUIPMENT HAS BEEN PLACED ON THE MARKET.

31 DECLARATION OF CONFORMITY 1. Radio Equipment (Product, type, batch or serial number). 2. Name and Address of manufacturer or his authorised representative. 3. This declaration of conformity is issued under the sole responsibility of the manufacturer.. 4. Object of the declaration (identification of the radio equipment allowing traceability; it may include a colour image of sufficient clarity where necessary for the identification of the radio equipment):. 5. The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: e.g. Directive 2014/53/EU. Other Union harmonisation legislation where applicable:. 6. References to the relevant harmonised standards used or references to the other technical specifications in relation to which conformity is declared. References must be listed with their identification number and version and, where applicable, date of issue:. 7. Where applicable, the notified body (name, number) performed (description of intervention) and issued the EU type examination certificate:. 8. Where applicable, description of accessories and components, including software, which allow the radio equipment to operate as intended and covered by the EU declaration of conformity:. 9. Additional information: Signed for and on behalf of:... (place and date of issue):... (name, function) (signature):...

Test Verification of Conformity

Intertek Testing Services Hong Kong Ltd. 2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong. Tel: (852) 2173 8888 Fax: (852) 2785 5487 Test Verification of Conformity On the basis of the referenced