DONGAN ELECTRIC MANUFACTURING CO.
|
|
- Lionel Newman
- 5 years ago
- Views:
Transcription
1 DONGAN ELECTRIC MANUFACTURING CO. Electric Manufacturing Co FRANKLIN DETROIT, MI Spec Tech Industrial 203 Vest Ave Valley Park, MO FAX Phone: 888 SPECTECH
2 Disconnect EU Declaration of Conformity Declaration of Conformity According to IEC Guide and EN Manufacturer s Name: Electric Mfg. Company Manufacturer s Address: 2987 Franklin Street Detroit, Michigan U.S.A. Electric Mfg. Company declares that the product prefixes cited below: Model Numbers: Series TDLSeries TDL12 Series TDE Series TDE12 Series TDA Series TDA12 Series TLA Series TLA12\ Series DES ( Specialty / Custom Applications ) Conform to the following standards: Supplementary Information: Safety: EN , Safety of Machines- Electrical Equipment of Machinery EN , Isolating s and Safety Isolating Requirements When properly installed and used, the Disconnect Series cited above meet the essential requirements, are in conformity with, and the CE Marking has been applied, according to the relevant EC Directives listed above and appropriate sections of the Low Voltage Directive 73/23/EEC. Licensed by TÜV Rheinland of North America, Inc, license T , dated December 5, Electric Manufacturing Company Dave Shah Chief Engineer 2 Detroit, Michigan USA January, 1998 Approved By: D. Shah Initial Written By: C. Lincoln Initial Revision 1.2 Date 1/5/98
3 Disconnect Electric Manufacturing Company is pleased to display its new line of Lighting Disconnects. The products in this catalog represent the most advanced series of disconnects available in the market today. Most important, these products have the approvals and certifications needed to compete and ship virtually worldwide. All Disconnects are UL Listed and Canadian UL Listed. In addition, all series, except Series TDG12, ADL, and ADL12, are CE Marked and Licensed for the European Union T Mark under the EN /10-92 Safety of Machinery Standard. These Disconnects have undergone extensive testing and certification by TÜV Rheinland and Underwriters Labs. With Disconnects, approvals are built in - not a high cost option. Disconnects are manufactured in 11 distinct series with features to meet all your transformer lighting disconnect needs: NEMA 1/IP23 and NEMA 12/IP54 enclosure styles. Domestic and multitap European voltage combinations. Finger - Safe fuses and transformer terminals. CE Marked, TÜV Bauart Marked, copper wound transformers. European and domestic color coded labels and switches. Custom designs through 15 k and Remote Mount models available. Disconnects comply with automotive specifications. Extensive third party approvals provide great flexibility in design variation. Contact your distributor, your Representative or the factory if the voltage combination, or configuration needed is not shown in this catalog. We would be glad to share our specialty design programs with you to provide disconnects matching the precise specifications required. NOTE: and weights may vary. Please consult factory for certified drawings. 3
4 Lighting Disconnect Series TDL NEMA 1 / IP 23 enclosure. Primary Voltage: 480 C. Secondary Voltage: 120 C. 50 / 60 Hz. One side of secondary is copper wound All overcurrent protection Fuse Fuse F3 Complies with automotive industry specifications. Duplex receptacle provided on 1000 through 3000, optional on Options: Green, ON pilot light available as additional cost option. Other voltage A B C D E F Lighting Duplex Fuse F4 250 TDL TDL TDL TDL TDL TDL TDL Series TDL Series TDL Outline Drawings Receptacle Supplied on 1 k and Larger 4 Side View
5 Lighting Disconnect Series TDL12 NEMA 12 / IP 54 enclosure. Primary Voltage: 480 C. Secondary Voltage: 120 C. 50 / 60 Hz. One side of secondary is copper wound All overcurrent protection Fuse Fuse F3 Complies with automotive industry specifications. Gasketed receptacle available as an added cost option on all sizes. Green ON pilot light provided. Options: Other voltage A B C D E F G Lighting Receptacle Fuse F4 Series TDL TDL TDL TDL TDL TDL TDL TDL Series TDL12 Outline Drawings Optional Receptacle Available Bottom View 5
6 Lighting Disconnect Series TDE 380 V* NEMA 1 / IP 23 enclosure. Primary Voltage: 380/400/ 416/440/460/480/575 C. Secondary Voltage: 110/115/120 C. 50 / 60 Hz. One side of secondary is copper wound Series TDE Outline Drawings Fuse F3 Lighting Duplex Overcurrent protection Fuse holders only. Duplex receptacle available as an added cost option on all sizes. Green ON pilot light provided. Options: Other voltage Fuse F4 250 TDE TDE TDE TDE TDE TDE TDE * Primary max amps for other voltages may be obtained by dividing capacity by line voltage. A B C D E F Series TDE Optional Receptacle Available 6 Side View
7 Lighting Disconnect Series TDE V* NEMA 12 / IP 54 enclosure. Primary Voltage: 380/400/416/ 440/460/480/575 C. Secondary Voltage: 110/115/120 C. 50 / 60 Hz. One side of secondary is copper wound Fuse F3 Lighting Overcurrent protection Fuse holders only. Gasketed receptacle available as an added cost option on all sizes. Green ON pilot light provided. Options: Other voltage Receptacle Fuse F4 250 TDE TDE TDE TDE TDE TDE TDE * Primary max amps for other voltages may be obtained by dividing capacity by line voltage. A B C D E F G Series TDE12 Optional Receptacle Available Series TDE12 Outline Drawings Bottom View 7
8 Disconnect - Auxilary Power Series TDA * Lighting amps and. duplex amps must not exceed total secondary max amps when used simultaneously. NEMA 1 / IP 23 enclosure. Primary Voltage: 480 C. Secondary Voltage: 120 C. 50 / 60 Hz. Both sides of secondary isolated from ground. is copper wound Primary overcurrent protection Secondary fuse holders only for 13/32 x 1 ½ fuses. Fuse * Lighting Duplex Complies with automotive industry specifications. Duplex receptacle provided on all sizes. Green ON pilot light provided. Options: Other voltage 500 TDA TDA TDA TDA TDA TDA A B C D E F Series TDA Series TDA Outline Drawings 8 Side View
9 Disconnect - Auxilary Power Series TDA12 NEMA 12 / IP 54 enclosure. Primary Voltage: 480 C. Secondary Voltage: 120 C. 50 / 60 Hz. Both sides of secondary isolated from ground. is copper wound All overcurrent protection Fuse Fuse F3 & F4 Complies with automotive industry specifications. Gasketed receptacle available as an added cost option on all sizes. Green ON pilot light provided. Options: Other voltage A B C D E F G Lighting Receptacle 500 TDA TDA TDA TDA TDA TDA Series TDA12 Series TDA12 Outline Drawings Optional Receptacle Available Bottom View 9
10 Dual Secondary Lighting Disconnect Series TLA NEMA 1 / IP 23 enclosure. Primary Voltage: 480 C. 50 / 60 Hz. Secondary One: 120 C. Secondary Two: 120 C. Disconnect features dual isolated secondaries for load isolation. Secondary One: Both sides un Secondary Two: One side Fuse One Secondary 1 Secondary 2 One One Fuse F3 & F4 is copper wound metal screen) between primary and secondary and between secondary one and secondary two. All overcurrent protection Duplex receptacle optional on all sizes. Green ON pilot light optional on all sizes. Two Two Two Fuse F TLA TLA TLA TLA TLA TLA TLA TLA A B C D E F Series TLA Other options: Other voltage Series TLA Outline Drawings Optional Receptacle Available 10 Side View
11 Dual Secondary Lighting Disconnect Series TLA12 NEMA 12 / IP 54 enclosure. Primary Voltage: 480 C. 50 / 60 Hz. Secondary One: 120 C. Secondary Two: 120 C. Disconnect features dual isolated secondaries for load isolation. Secondary One: Both sides un Secondary Two: One side Fuse One Secondary 1 Secondary 2 One One Fuse F3 & F4 is copper wound metal screen) between primary and secondary and between secondary one and secondary two. All overcurrent protection Green ON pilot light provided. Two Two Two Fuse F TLA TLA TLA TLA TLA TLA TLA TLA A B C D E F G Gasketed receptacle optional on all sizes. Other options: Other voltage Series TLA12 Series TLA12 Outline Drawings Bottom View Optional Receptacle Available 11
12 Lighting Disconnect Series ADL NEMA 1 / IP 23 enclosure Primary Voltage: 480 C Secondary Voltage: 120 C. 60 Hz. One side of secondary is copper wound All overcurrent protection Fuse Fuse F3 Lighting Complies with automotive industry specifications. Duplex receptacle provided on 1000 through 3000, optional on Options: Green or red ON pilot light available as additional cost option. Other voltage Duplex Fuse F4 250 ADL ADL ADL ADL ADL ADL ADL A B C D E F Series ADL Series ADL Outline Drawings Receptacle Supplied on 1 k and Larger 12 Side View
13 Lighting Disconnect Series ADL12 NEMA 12 / IP 54 enclosure. Primary Voltage: 480 C. Secondary Voltage: 120 C. 60 Hz. One side of secondary is copper wound Complies with automotive industry specifications. Fuse Fuse F3 Lighting All overcurrent protection Gasketed receptacle available as additional cost option. Options: Green or red ON pilot light available as additional cost option. Other voltage Receptacle Fuse F4 Series ADL ADL ADL ADL ADL ADL ADL ADL A B C D E F G Series ADL12 Outline Drawings Optional Receptacle Available Bottom View 13
14 Large Lighting Disconnect Series TDG12 NEMA 12 / IP 54 enclosure. Primary Voltage: 480 C. Secondary Voltage: 120 C. 60 Hz. Large capacity and One side of secondary is copper wound Green ON pilot light provided. Series TDG12 Outline Drawings Fuse Fuse F3 All overcurrent protection fuses (1 1/16 x 2 3/8 ). Gasketed duplex receptacle available as additional cost option. Options: Other voltage Custom sizes to 15 k available. Fuse with Receptacle F3 Fuse with Receptacle F TDG TDG A B C D E F G Series TDG12 Optional Receptacle Available 14 Bottom View
15 OEM Product Groups General Purpose Dry Type Distribution Single Phase, Three Phase, Buck Boost, Motor Drive Isolation, Custom Designs Single Phase, k - Series 35, 80, 85, 61 Three Phase, 3 k k - Series 63, 76 Buck - Boost, 50-5 k - Series 35, 80, 85 Motor Drive Isolation, 3 k k - Series 63 CE Marked Single and Three Phase Units - Series ES-11, Series ES-31 K Factor, 15 k k - Series TK Custom Designs - Core and Coil Designs - Autotransformers - UL and CSA Family Approvals Industrial Control s, Servo Drive Isolation s Series 50, Screw Terminals - Domestic Suffix 052, 053, 054, 056, Export Suffix 058, 059 Series HC, Molded Terminals - Suffix -41, -44, -46, -47 Series HC, Molded Terminals w/ Preconnected Fuse Holders - Suffix -4100, CE Marked Units - Series ES-10 - Suffix.326,.366,.376,.386 Servo Drive Isolation Transfomers - Allen Bradley Type Other Manufacturers Available Custom Designs - UL and CSA Family Approvals Other Products Series 33 Control s Industrial Gas & Oil Ignition s Signaling s Medical Isolation s Single and Three Phase Testing s 15
16 Electric Manufacturing Company CE Marked Disconnects Disconnects provide off the shelf solutions for lighting and auxilary power to control panels world wide. All disconnects are UL and Canadian UL Listed. In addition, most series have been tested and licensed by TÜV Rheinland as being in compliance with EN and EN These products bear both the CE Mark and the European Union T Mark under the Safety of Machinery Standard. With Disconnects, approvals are built in - not a high cost option. CE Marked s also supplies single and three phase CE Marked transformers. Series ES s offer a global solution for transformer acceptability and reliability. Series ES are UL and Canadian UL Listed, CE Marked, and have been tested and licensed by TÜV Rheinland as being in compliance with EC Directives and the relevant sections of the Low Voltage Directive. Request Transfax Bulletin 107 for more information. 16 Transfax / 98
S10N06P02P 2KVA 1PH 120/240V 16/32V Buck Boost Transformer. Descriptions
3804 South Street 75964-763, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 S10N06P0P KVA 1PH 10/40V 16/3V Buck Boost Transformer Eaton Corp Catalog Manufacturer Description Weight per unit Product
More informationJefferson Electric Inc Product Catalog JE901
Jefferson Electric Inc Product Catalog JE901 Worldwide Products and Services Tradition of Excellence Jefferson Electric has been a pioneer and innovator of magnetic products since 1915. We enjoy a rich
More informationPANELMDP Main Distribution Panel. Descriptions Energy Efficient Transformer
PANELMDP Main Distribution Panel Eaton Corp Catalog Number Manufacturer Description Weight per unit Product Category Descriptions Product Type PANELMDP Eaton Corp 1.0 (lbs/each) Three Phase Energy Efficient
More informationHPS Universal BUCK-BOOST TRANSFORMERS
BUCK-BOOST TRANSFORMERS Single and Three Phase Potted Buck-Boost Transformers Buck-Boost Applications & Standard Specification... 80 Selecting Buck-Boost Transformers... 81 Single Phase Selection Tables...
More information2.1. Product Description
.1 NEMA TP-1 Energy-Efficient Type DT-3 Contents Description NEMA TP-1 Energy-Efficient Features, Benefits and Functions........... Standards and Certifications............... Catalog Selection................
More informationPower Transformers & High Frequency Magnetics Your one source for all your magnetics needs!
Power Transformers & High Frequency Magnetics Your one source for all your magnetics needs! Audio Battery Chargers Communication Dental Equipment Elevator Controls Fire & Safety Gaming HVAC Industrial
More informationFile E65390 Project 06CA October 31, 2006 REPORT COMPONENT - TRANSFORMERS, CLASS 2 AND CLASS 3
File E65390 Project 06CA22550 October 31, 2006 REPORT on COMPONENT - TRANSFORMERS, CLASS 2 AND CLASS 3 ACUMEN ELECTRONICS, DBA TRIAD MAGNETICS CORONA, CA Copyright 2006 Underwriters Laboratories Inc. Underwriters
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(24V60HZ) Catalog No. 276390 Eaton Catalog No. XTRE10B22B6 Delivery program Product range DILA relays Application Contactor relays Description Basic devices
More informationStandards. n Built in accordance with NEMA, ANSI, UL and CSA standards
Buck-Boost 9 0 VA to 10 Applications n A comprehensive line of transformers for low voltage applications. n Economical for stepping voltages up or down n Solve over/under voltage problems efficiently n
More informationAmetek, Inc. Rotron Technical Products Division. 100 East Erie St., Suite 200 Kent, Ohio User's Guide. Number Revision F
Ametek, Inc. Rotron Technical Products Division 100 East Erie St., Suite 200 Kent, Ohio 44240 User's 120 Volt, 800 Watt and 240 Volt, 1200 Watt Brushless Motor Drive Electronics 5.7" (145 mm) and 7.2"
More informationDry Type Transformers Full Line Catalog. jeffersonelectric.com
Dry Type Transformers Full Line Catalog jeffersonelectric.com The Transformer Authority PIONEER TRANSFORMERS: Why us? Scale We produce over 100,000 transformers every year. With this high level of production
More informationOpen Type Without Enclosure
Bulletin L NEMA AC Electrically Held Lighting Contactors Product Selection Top Wiring for Non-Motor and Lighting Loads Tungsten Lamp Loads (Max. V Line, V Load) Maximum Continuous Ampere Ratings [A] General
More informationFDM Medium Voltage Controller
1-1 LMR PLUS Product Description For over 50 years, EATON Corporation has been the industry leader in Medium Voltage Motor Control. The FDM Medium Voltage Fire Pump Controller is based on the AMPGARD controller
More informationGENERAL PURPOSE DRY-TYPE DISTRIBUTION TRANSFORMERS
GENERAL PURPOSE DRY-TYPE DISTRIBUTION TRANSFORMERS Acme offers a large selection of Dry-Type Distribution Transformers. Ranging from 600 Volt and below, in both Single and Three Phase, you re sure to find
More informationBulletin 1497 Global Control Transformers
Bulletin 1497 Global Control Transformers Bulletin 1497 Global Control Circuit Transformers Bulletin 1497 Global Control Circuit Transformers are designed to reduce supply voltages to control circuits.
More informationProducts catalogue (I-P Edition)
Products catalogue (I-P Edition) Products catalogue (I-P Edition) FROM QUALITY OUR NATURAL DEVELOPMENT Active in the industry of Refrigeration and Air Conditioning for fifty-five years, Castel is well-established
More informationSupplemental Motor Protection Devices Specifications
Technical Data Supplemental Motor Protection Devices Specifications Bulletin Numbers 809S, 813S, 814S, 817S, 1409, 1410 Topic Page 809S/813S/814S/817 Dedicated Function Motor Protection Relays 2 Product
More informationLinear Power Supplies Data Sheet
Features Description Power-One produces the industry s broadest selection of Linear power supplies with output voltages from 5 volts through 250 volts. Rugged technology and proven design merge to create
More informationMichigan State University Construction Standards SWITCHBOARDS, PANELBOARDS, AND CONTROL CENTERS PAGE
PAGE 262400-1 SECTION 262400 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSupplemental Motor Protection Devices Specifications
Technical Data Supplemental Motor Protection Devices Specifications Bulletin Numbers 809S, 813S, 814S, 817S, 1409, 1410 Topic Bulletin 809S/813S/814S/817S 2 Page Product Line Overview 2 Cat. No. Explanation
More information2.4. Transformers. Contents Description General-Purpose Encapsulated Transformers Catalog Number Selection... Product Selection... Product Description
General-Purpose Encapsulated.4 Type EP 3 5 Contents Description General-Purpose Encapsulated Catalog Selection................ Product Selection....................... Single-Phase..........................
More informationLIFE LINE PRODUCT SPECIFICATION FOR A 1 TO 3 KVA, SINGLE PHASE, POWER DISTRIBUTION SYSTEM WITH REGULATION AND CONDITIONING
LIFE LINE PRODUCT SPECIFICATION FOR A 1 TO 3 KVA, SINGLE PHASE, POWER DISTRIBUTION SYSTEM WITH REGULATION AND CONDITIONING 1.0 General This specification covers the electrical characteristics and general
More informationBUCK-BOOST TRANSFORMERS
Hammond Power Solutions Inc. Page of Buck-boost transformers represent an economical way to both raise supply voltage caused by line drop or equipment demand on the distribution system; or lower voltage
More informationUser's Manual: Series 350T AC Current Input (External Sensor), DC-Powered Transmitters
User's Manual: Series 350T AC Current Input (External Sensor), DC-Powered Transmitters Table of Contents Page Introduction 1 Description 1 Specifications 2 Installation 3 Calibration 4 General Maintenance
More informationTop wiring permanent magnet latching For non-motor loads, lighting, heating NEMA sizes to 300 A 2-, 3-, and 4-pole configurations
Bulletin LP NEMA AC Permanent Magnet-Latching Lighting Contactors Product Overview/Product Selection/Wiring Diagram A, -Pole Open Type without Enclosure Bulletin LP Top wiring permanent magnet latching
More informationBrown University Revised 2/1/2006 Facilities Design & Construction Requirements SECTION 16461C - DRY TYPE TRANSFORMERS
SECTION 16461C - DRY TYPE TRANSFORMERS PART 1 - GENERAL 1.1 This section includes design and performance requirements for dry-type transformers rated for use on secondary distribution systems rated 600
More informationDescription Basic devices with positive operation contacts. Standards IEC/EN 60947, EN , VDE 0660, UL, CSA
DATASHEET - DILA-22(230V50HZ,240V60HZ) Delivery program Contactor relay, 2N/O+2N/C, AC Part no. DILA-22(230V50HZ,240V60HZ) Catalog No. 276399 Eaton Catalog No. XTRE10B22F EL-Nummer 0004130208 (Norway)
More informationNon-Spring Return DuraDrive Modulating Actuator
MS41-60xx Series n-spring Return DuraDrive Modulating Actuator The DuraDrive direct coupled 24 Vac non-spring return rotary electric actuators are designed for modulating control of dampers. S41-60xx ries
More information2.5. Contents Description Motor Drive Isolation Transformers... Mini Power Centers... Totally Enclosed Non-Ventilated Transformers
.5 Transformers Distribution Transformers Three-Phase Type DT-3E Totally Enclosed Non-Ventilated Totally Enclosed Non-Ventilated Transformers Product Description Note: The following pages provide listings
More informationWarehouse Stock Transformers
Warehouse Stock s Warehouse Stock Buck-Boost Application Description and The Buck-Boost has four separate windings, two-windings in the primary and two-windings in the secondary. The unit is designed for
More informationDeploying Current Transformers in Applications Greater Than 200 A
Deploying Current Transformers in Applications Greater Than 200 A Andrew Schaeffler Step-down Current Transformers (CTs) are common, and useful, in large motor applications. They provide isolation between
More informationDescription & Applications Questions & Answers Selection Charts Single Phase Selection Charts Three Phase...
SECTION BUCK-BOOST TRANSFORMERS A simple and economical way to correct offstandard voltages... from 95 to 500 volts; single and three phase, in sizes up to 60 kva. Simplified buck-boost rating charts make
More informationSpring Return DuraDrive Proportional Actuator
MS40-7043, MS4-7073, MS4-753 Spring Return DuraDrive Proportional Actuator For spring return applications that require proportional modulation control of dampers and valves in HVAC systems. Features: Proportional
More informationSingle, dual, and multi-tap primary voltages Single phase EN finger-safe protection RoHS compliant 1497 A M1 3 N
Bulletin Product Overview/Catalog Number Explanation Cat. No. -B-HXJX--N Control Circuit Transformer, - pole with Optional Cat. No. -R Fuse Cover Cat. No. -C-BASX--N Control Circuit Transformer, Non-Fused
More informationDISCONNECT SWITCHES. UL Listed CSA Certified
POWER & ACTUATION ENCLOSED DISCONNECT SWITCHES When you need an at-motor non-fused disconnect switch with superior performance, look to c3controls. Our Series E2 Enclosed Disconnects feature 3- and 4-Pole
More informationSIEMENS ENERGY & AUTOMATION INC DISTRIBUTION PRODUCTS DIV
Certificate Number 20081124 E29197A Page 1 of 8 Report Reference E29197, 1974 September 17 Issue Date 2008 November 24 Issued to: This is to certify that representative samples of SIEMENS ENERGY & AUTOMATION
More informationPCR Polarization Cell Replacement. The Polarization Cell Replacement (PCR) Technical Literature COMMON APPLICATIONS
The Polarization Cell Replacement (PCR) Technical Literature INTRODUCTION The Polarization Cell Replacement (PCR) is a solid-state device commonly used in conjunction with cathodically protected structures.
More informationMid-West. Instrument. Model 140 Electrical Installation and Operating Instructions. Gauge Front ELECTRICAL
Mid-West Instrument BULLETIN NO. ELEC-IM140/11A Replaces ELEC-IM140-141/09A ELECTRICAL Gauges with switches have one or two SPST or SPDT hermetically sealed adjustable set point reed switch assemblies.
More informationMTS AND MTS PR¼ 16 OUTPUT SEQUENTIAL TIMER PENTAIR CLEAN AIR SYSTEMS
MTS AND MTS PR¼ 16 OUTPUT PENTAIR CLEAN AIR SYSTEMS MTS DESCRIPTION The Model MTS sequencer has been designed to guarantee the control of diaphragm valves mounted on pulse-jet dust collector filters containing
More informationAssembly. Front view. LED yellow: Relay output. LED red: LB/SC
Switch Amplifier Features Assembly -channel isolated barrier 30 V AC supply Dry contact or NAMUR inputs Relay contact output Line fault detection (LFD) Reversible mode of operation Up to SIL acc. to IEC
More information1715 Redundant I/O System Specifications
Technical Data 1715 Redundant I/O System Specifications System Module Catalog Numbers 1715-AENTR, 1715-IB16D, 1715-OB8DE,1715-IF16, 1715-OF8I Base Unit Catalog Numbers 1715-A2A, 1715-A3IO Termination Assembly
More informationCommercial/Medical. International + Linears
D C P o w e r S u p p l i e s International + Linears Commercial/Medical International + Linears Summary: World-wide ac input ranges and safety standards Industry standard packages Commercial UL/CSA TUV/IEC
More informationBUCK-BOOST TRANSFORMERS
Where Are Buck-Boost Transformers Used? A typical buck-boost application is 120 volts in, 12 volts out for low voltage lighting or control circuitry. In most applications, this low voltage transformer
More informationSECTION AUTOMATIC TRANSFER SWITCH
SECTION 26 36 23 PART 1 - GENERAL 1.1 THE REQUIREMENT A. Furnish and install automatic transfer switches (ATS) with number of poles, amperage, voltage, withstand and close-on ratings as shown on the plans.
More informationBuck-Boost Transformers
Buck-Boost Transformers Buck Boost transformers are the ideal solution anytime a line voltage change in the 5-15% range is required in single phase or three phase applications. Proper voltage is critical
More informationSOM i.mx6. Regulation Information. Simple. Robust. Computing Solutions. Rev 1.1
SOM i.mx6 Regulation Information Rev 1.1 Simple. Robust. Computing Solutions SolidRun Ltd. 7 Hamada st., Yokne am Illit, 2495900, Israel www.solid-run.com 1 Page Document revision 1.1 24052018 SolidRun
More informationLow Voltage Power Factor Correction Equipment Specifications Automatic, Automatic Detuned, Automatic Tuned
Low Voltage Power Factor Correction Equipment Specifications Automatic, Automatic Detuned, Automatic Tuned Part 1 - General Scope and Product Description 1.0 This specification contains the minimum design
More information2.2 American National Standards Institute Corporation and its applicable standards C39.1, C80.1, C89, C84.1.
TECHNICAL SPECIFICATIONS for Single Phase, 1 to 3 KVA Power Conditioner with Regulation and Distribution Constant Power 3 (CP3) CP36508A 7/15/04 1.0 General This specification covers the electrical characteristics
More information1 INTRODUCTION ORDER CODE / INFORMATION
INTRODUCTION ORDER CODE / INFORMATION 269/269Plus * * * * * * 269/269Plus SV D/O.4 ORDER CODE / INFORMATION Motor management relay Standard version Drawout version Phase CT Ground CT (required for D/O
More informationType Overview. Technical Data. Outdoor Humidity, Temperature Sensor
Outdoor Humidity, Temperature Sensor ±2% accurate humidity and temperature sensor for outdoor applications. Temperature is available with dual active 4 to 20 ma outputs or passive only for temperature.
More informationBulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below.
Bulletin H Product verview/specifications Bulletin H/ Hazardous locations push buttons and stations Classes I, II & III Divisions & / in. - NPSM barrel Type & Explosion-proof operators Table of Contents
More informationSwitched mode power supply for DIN rail mounting type SMP21 DC24V/10A
Switched mode power supply for DIN rail mounting type SMP2 DC24V/0A Description Switched mode power supply for rail mounting, with independent change-over of input voltages (AC 5/20 V), integral passive
More informationDescription Basic devices with positive operation contacts. Connection to SmartWire-DT yes in conjunction with DIL-SWD SmartWire DT contactor module
DATASHEET - DILA-22(24VDC) Delivery program Contactor relay, 2N/O+2N/C, DC current Part no. DILA-22(24VDC) Catalog No. 276414 Eaton Catalog No. XTRE10B22TD EL-Nummer 4130211 (Norway) Product range DILA
More informationOPTIFLUX 5000 Technical Datasheet
OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech
More informationUser's Manual: Series 450T AC Current Input (External Sensor), AC-Powered Transmitters
User's Manual: Series 450T AC Current Input (External Sensor), AC-Powered Transmitters Table of Contents Page Introduction 1 Description 1 Specifications 2 Installation 3 Calibration 4 General Maintenance
More informationTransformer Questions & Answers
Transformer Questions & Answers. What is a transformer and how does it work? A transformer is an electrical apparatus designed to convert alternating current from one voltage to another. It can be designed
More informationUse this table to size an enclosure and calculate required ventilation for your Kinetix 5500 drive system.
Power Dissipation Specifications Use this table to size an enclosure and calculate required ventilation for your Kinetix 5500 drive system. Usage as % of Rated Power Output (watts) 20% 40% 60% 80% 100%
More informationStraight Isolation - Hard Wired (169 Series)
LINE ISOLATION TRANSFORMERS (115V to 115V) Primary 115C, 60 Hz., Secondary 115C Electrostatic shield between primary & secondary Connection by flexible leads, 8" minimum length Perfect for circuit isolation
More informationPREFACE ********************************************************** IT IS NOT INTENDED THAT THESE STANDARDS BE COPIED AND USED AS A SPECIFICATION!
PREFACE This publication has been prepared as a guide for Architectural and Engineering (A&E) firms in the preparation of documents for the design and construction of new structures and the remodeling
More informationLow Voltage Transformers. Selection Guide
Low Voltage Transformers Selection Guide Special Purpose Transformers Non-Ventilated Transformers For use in contaminated or dust-laden environments, indoor or outdoor. Export Model Transformers Designed
More informationTransformer Basics AN05-10ST. Application Note. innovation in wire wound magnetic technology. January 09 Rev 1
innovation in wire wound magnetic technology Transformer Basics January 09 Rev 1 AN05-10ST Isolation Transformers Increase Safety of Electronic Systems Application Note Isolation Transformers Increase
More informationFOUNDATION Fieldbus Junction Box
Installation Instructions FOUNDATION Fieldbus Junction Box Catalog Number 1788-FBJB4R, 1788-FBJB6 Topic Page Important User Information 2 About the Junction Boxes 3 Additional Resources 3 Installation
More informationAmveco Toroidal Solutions. Acme Electric s class leading toroidal magnetics is the perfect solution for the most challenging applications.
Amveco Toroidal Solutions Acme Electric s class leading toroidal magnetics is the perfect solution for the most challenging applications. AMVECO TOROIDAL SOLUTIONS Acme Electric s Amveco brand specializes
More informationSWF DV/DT Solutions Sinewave Filters. N52 W13670 NORTHPARK DR. MENOMONEE FALLS, WI P. (262) F. (262)
SWF DV/DT Solutions Sinewave Filters N52 W13670 NORTHPARK DR. MENOMONEE FALLS, WI 53051 P. (262) 754-3883 F. (262) 754-3993 www.apqpower.com Does your application use variable frequency drives for improved
More information800T T2 H2 E E X X. a b c d e f g Right Left Right Left. d, e, f, g. c (cont'd) 1-, 2-, 3-, 4-Way Toggle Switches (Bul. 800T only)
1-,, 3-, 4- Toggle Switches (Bul. 800T only) 800T T2 H2 E E X X a b c d e f g Right Left Right Left Blank C T1 T2 T3 T4 a Finger-Safe Guards Description No guards Guards on terminals b Operator Type Description
More informationSection 16621A - AUTOMATIC TRANSFER SWITCH. Part 1 General
Section 16621A - AUTOMATIC TRANSFER SWITCH Part 1 General 1.01 One 600 Amp, 3 Phase, 480 Volt Automatic Transfer Switch (ATS) shall be provided with gasketed enclosure. The ATS shall consist of an inherently
More informationLDW240 Series are single, two or three phase DIN Rail Switching Power Supplies.
LDW240 Series are single, two or three phase DIN Rail Switching Power Supplies. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes
More informationNI 2865A 0.3 A Matrix Cards for NI SwitchBlock
SPECIFICATIONS NI 2865A 0.3 A Matrix Cards for NI SwitchBlock This document lists specifications for the NI 2865A matrix relay cards. All specifications are subject to change without notice. Visit ni.com/manuals
More informationSupplemental Motor Protection Devices Table of Contents
Supplemental Motor Protection Devices Table of Contents Supplemental Motor Protection Devices Bulletin 0S/S//... Page - Bulletin 0 Arcing Ground Fault Detection System: Adjustable Trip from A... Page -
More information1715 Redundant I/O System Specifications
Technical Data 1715 Redundant I/O System Specifications System Module Catalog Numbers 1715-AENTR, 1715-IB16D, 1715-OB8DE,1715-IF16, 1715-OF8I Base Unit Catalog Numbers 1715-A2A, 1715-A3IO Termination Assembly
More information1. All electrical switches and outlets used shall be equal to Hubbell heavy duty, specification grade or equivalent quality.
PART 1: GENERAL 1.01 Wiring Devices A. This section of the standard includes design requirements for wiring connections, including receptacles and switches to equipment specified in other sections. 1.02
More informationSINGLE PHASE BUCK & BOOST TRANSFORMERS INSTRUCTION MANUAL
SINGLE PHASE INSTRUCTION MANUAL DIAGRAM D This manual applies to all single-phase buck & boost transformers sold by Larson Electronics. Please refer to the connection diagram on pages 4-6 for properly
More informationFC1010 FC10010 FC15030 BFC1010 BFC10010 BFC15030 BFC
Filter Cards for Single Phase Loads: Brushed Motors, Voice Coils, and other Single Phase Loads Filter Cards for Three Phase Loads: Brushless Motors, Linear Motors, and other Three Phase Loads Filter Cards
More information200 Watt Passive Shunt Module
Installation Instructions 200 Watt Passive Shunt Module (Catalog Number 9101-1183) Drives can require external power dissipation when large inertial loads are present. To ensure that faults due to excessive
More informationSteps for Selecting the Proper Transformer
SECTION I Page 4 Steps for Selecting the Proper Transformer SINGLE PASE LOADS 1. Determine electrical load A. Voltage required by load. B. Amperes or KVA capacity required by load. C. Frequency in z (cycles
More informationInstructions Contact numbers to EN Coil terminal markings to EN Integrated diode-resistor combination Coil rating 2.
Delivery program Contactor relay, 2N/O+2N/C, DC current Part no. DILER-22-G(24VDC) Catalog No. 010042 Eaton Catalog No. XTRM10A22TD EL-Nummer 4130354 (Norway) Product range DILER Mini-contactors Application
More informationOpen Type Without Enclosure
Bulletin L NEMA AC Electrically Held Lighting Contactors Product Selection Top Wiring for Non-Motor and Lighting Loads Tungsten Lamp Loads (Max. V Line, V Load) Maximum Continuous Ampere Ratings [A] General
More information2.4. Transformers. Contents Description General-Purpose Encapsulated Transformers Catalog Number Selection... Product Selection... Product Description
General-Purpose Encapsulated Transformers.4 Type EP 3 5 Contents Description General-Purpose Encapsulated Transformers Catalog Selection................ Product Selection....................... Single-Phase..........................
More informationNew Products Catalogue 2009 Safety Relays ESR5
www.moeller.net New Products Catalogue 2009 Safety Relays ESR5 u Description Functional safety on machines monitoring with safety relays ESR5 Emergency-stop circuits Monitoring of movable guards with guard
More information2.4. Transformers. Contents Description General-Purpose Encapsulated Transformers Catalog Number Selection... Product Selection... Product Description
General-Purpose Encapsulated.4 Type EP 3 5 Contents Description General-Purpose Encapsulated Catalog Selection................ Product Selection....................... Single-Phase..........................
More informationSimple Sturdy Economical LABEL. Invest in Confidence. Weatherproof Quarter-turn Actuators EZ RANGE
Simple Sturdy Economical LABEL by Invest in Confidence EZ Weatherproof Quarter-turn Actuators EZ RANGE 2 Industrial actuation made easy BERNARD CONTROLS, inventor of the industrial compact quarter turn
More informationINTERNATIONAL TRANSFORMERS. Acme Electric s broad selection of CSA energy efficient transformers
INTERNATIONAL TRANSFORMERS Acme Electric s broad selection of CSA energy efficient transformers International Transformers What is CSA C802.2 Compliant? On January 1, 2005, the Canadian Energy Efficiency
More informationSEPARATOR P20G TYPE USER S MANUAL
SEPARATOR P20G TYPE USER S MANUAL 1 2 Contents 1. APPLICATION... 5 2. SEPARATOR SET... 5 3. OPERATIONAL SAFETY... 6 4. FITTING... 7 4.1. Fixing Way... 7 4.2. External Connection Diagrams... 8 5. SERVICE...
More informationTransformer Questions & Answers
Transformer Questions & Answers. What is a transformer and how does it work? A transformer is an electrical apparatus designed to convert alternating current from one voltage to another. It can be designed
More informationSingle-phase isolating transformers to VDE / EN
Type ETT Single-phase isolating transformers to VDE 0570-2-4 / EN 61558-2-4 Application Transformers supplying electric circuits or devices for which an electrical isolation from the feeding electric circuit
More informationARC TRACKER TM OPERATOR S MANUAL IM /2017 REV01 ENGLISH
ARC TRACKER TM IM3047 06/2017 REV01 OPERATOR S MANUAL ENGLISH THE LINCOLN ELECTRIC COMPANY 22801 St. Clair Ave., Cleveland Ohio 44117-1199 USA www.lincolnelectric.eu 1 THANKS! For having chosen the QUALITY
More informationFull Line Product Catalog
Full Line Product Catalog TC Table of Contents Dry-Type Distribution Transformers Transformer Questions and Answers 6-13 Enclosure Definition 13 Steps in Transformer Selection 14-17 Construction Features
More informationEMI Installation Guidelines
EMI Installation Guidelines Although Red Lion Controls Products are designed with a high degree of immunity to Electromagnetic Interference (EMI), proper installation and wiring methods must be followed
More informationMain catalogue. SNK Series Terminal Blocks Accessories Marking Solutions
Main catalogue SNK Series Terminal Blocks Accessories Marking Solutions 10 5.2 mm m 0.205 in spacing 53 2.09" 26.7 1.05" 3 4 5 6 7 8 9 10 Save space by connecting s up to 4 mm2 (CB certified) 12 AWG in
More informationLow Pass Harmonic Filters
Exclusive e-rated Provider PRODUCT SHEET HARMITIGATOR TM Low Pass Harmonic Filters A solution for electrical distribution systems that require stable, reliable power, characterized by unparalleled power
More informationLXM32AD18M2 motion servo drive - Lexium 32 - single phase supply voltage 115/230V - 0.5/1kW
Product data sheet Characteristics LXM32AD18M2 motion servo drive - Lexium 32 - single phase supply voltage 115/230V - 0.5/1kW Main Range of product Lexium 32 Product or component type Device short name
More informationStraight Isolation - Plug In (171 Series)
Straight Isolation - Plug In (171 Series) LINE ISOLATION PLUG & RECEPTACLE TRANSFORMERS (115V to 115V) Primary 115C, 50/60 Hz., Secondary 115C Electrostatic shield between primary & secondary. Hi-pot tested
More informationFor additional PowerFlex 4 and 40 data and general drive information, refer to the following publications:
Product Overview Providing users with powerful motor speed control in a compact, space saving design, the Allen-Bradley PowerFlex 4 and 40 AC drives are the smallest and most cost-effective members of
More informationNI PXI-2797 Specifications 40 GHz 6 1 Terminated 50 Ω Multiplexer
NI PXI-2797 Specifications 40 GHz 6 1 Terminated 50 Ω Multiplexer This document lists specifications for the NI PXI-2797 terminated multiplexer module. All specifications are subject to change without
More informationPowerFlex 400 Submittal
PowerFlex 400 Submittal Submittal Date: Project Name: Project Location: Consulting Engineer: Contractor: Contractor PO #: Distributor Name: Distributor Contact: Distributor Reference #: Note: This is general
More informationAnalog Servo Drive 30A20AC
Description Power Range NOTE: This product has been replaced by the AxCent family of servo drives. Please visit our website at www.a-m-c.com or contact us for replacement model information and retrofit
More informationCatalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009
Catalog 00 Contactors up to 5 A Motor Starters up to 55 kw 03/009 Kraus & Naimer The development of the Blue Line rotary switch, contactor and motor starter product ranges is based on more than hundred
More informationFor Immediate Delivery call KMParts.com at (866)
Return To MAIN INDEX Magnetic Contactors, Overview / Contactors DIL...M Contactors AC Operated AC Operated, Reversing DC Operated AC/DC Operated, DC Hp ratings / /6 /8 / Starters DIL Universal Contactors
More informationXM Monitoring Modules Specifications
Technical Data XM Monitoring Modules Specifications Catalog Numbers 1440 series The XM series of intelligent I/O modules process, in real-time, the critical parameters used to assess the current health
More informationSUGGESTED SPECIFICATION for Series 300 Automatic Transfer Switches
SUGGESTED SPECIFICATION for Series 300 Automatic Transfer Switches PART 1 GENERAL 1.01 Scope Furnish and install automatic transfer switches (ATS) with number of poles, amperage, voltage, and withstand
More information