ABIMIG A & AT Lightweight MIG

Transcription

1 T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. ABIMIG A & AT Lightweight MIG Air-cooled MIG Torches

2 ABIMIG AT LW MIG/MAG Welding Torches Air cooled Up to 00 A Welding professionals do some of the most physically demanding jobs in metalworking and fabrication today. Welders have to constantly adapt their posture to effectively access their work, while simultaneously focusing on maintaining a solid welding arc at all times. This heavy physical strain can lead to body and joint pain, and potentially create chronic, lifetime discomfort. For this reason, every welder wants a robust welding torch that can perform the job needed, but also is both light and powerful, and is equipped with a torchneck that has been optimized for the job. The new air-cooled welding torch series from ABICOR BINZEL - the ABIMIG AT LW - makes the weld life easier. The T interface system allows for rotating torch necks with angles and alignments that are matched to the actual welding job. The necks can be quickly switched out for easy maintenance and improved accessibility. With our lightweight Bikox cable and ergonomic molded handle with ball socket base and extended trigger, getting comfortable on the job is now easier than ever. ABIMIG AT is air-cooled perfection. Welding as it should be. Find out for yourself. ABIMIG AT LW Technical data (EN ): Rating: Duty cycle: 60% CO 0 A Mixed gases 0 A M1 (DIN EN 9) Wire size: mm (.00.0 ) ABIMIG AT LW Technical data (EN ): Rating: Duty cycle: 60% CO 0 A Mixed gases 10 A Wire size: mm (.0.06 ) ABIMIG AT 1 LW Technical data (EN ): Rating: Duty cycle: 60% CO 00 A Mixed gases A M1 (DIN EN 9) Wire size: 0.9. mm (.0.09 )

3 Ordering Chart A T 1 T - L1 T Torch Model Amperage Cable Length Nozzle Wire Size Back End Type Torch Model A - ABIMIG T - Extended Trigger T - Rotating Neck Amperage - 00 Amp ( Model) - 00 Amp ( Model) Amp (1 Model) Cable Length 10 Feet 1 Feet 0 Feet Feet Nozzle T - Threaded Back End E - Euro L - Lincoln External gas L1 - Lincoln 10, PF7/8 L - Lincoln Power MIG HT - Hobart/Tweco M - Miller Standard M1 - Miller Multimatic X - No connector kit installed Wire Size -.0 Inches -.0 Inches -.0 Inches Inches Inches Inches 1 - & 1 Models - & Models - 1 Models Only Handling weight at foot working height 6 0 ABIMIG AT LW Competitor 1 (0 A) Competitor (0 A). lbs..7 lbs..0 lbs. How Lightweight is the AT? Here s the weight average compared to the competition.

4 MIG/MAG ABIMIG AT Welding LW MIG/MAG Torch ABIMIG Welding GRIP Torches LW Body Cable Assembly - ABIMIG AT ABIMIG AT ABIMIG AT ABIMIG AT 1 1 Nozzle Contact Tip See Page 9 & 10 for complete list of ABIMIG AT and ABIMIG A consumables. Tip holder/diffuser Adapter Piece Standard Swanneck (x -1, y -11, 60D) Standard Swanneck (x -16, y -110, 60D) Standard Swanneck (x -160, y -10, 60D) Complete 180.D D D077 7 Trigger only 18.D D D118 8 Bikox 10 feet (1 cable shown) 160.H8 160.H H Bikox 1 feet 160.H 160.H8 160.H77 Bikox 0 feet 160.H 160.H H Bikox feet 160.H6 160.H Liner See Page 9 & 10 for complete list of ABIMIG AT and ABIMIG A consumables. 10 Cable Support Front 00.D7 00.D7 00.D7* 11 Cable Support Rear D18* N/S Contact Tip Wrench *Cable Support Front and Rear are included in ABIMIG AT 1 as part of #8 Bikox cable. 9 1 Change out torch necks in seconds and get back to doing what you love - welding. AT s Average Neck Change Time: <1 min. Standard MIG Neck Change Time: 0 min.

5 Custom Swannecks - Short, Long, 180 Flex, & Extra Long 01.H8 016.D 01.H 016.D H1 01.H9 01.H Octagonal AT 60 o Octagonal AT 1 60 o Octagonal AT o Octagonal AT 1 o Octagonal AT o 0 AT 180 o Flex 6 Octagonal 9 Round AT o 0 Round AT o 00

6 ABIMIG A LW MIG/MAG Welding Torches Air cooled Up to 00 A ABIMIG A LW Technical data (EN ): Rating: Duty cycle: 60% CO 0 A Mixed gases 0 A M1 (DIN EN 9) Wire size: mm (.00.0 ) ABIMIG A LW Technical data (EN ): Rating: Duty cycle: 60% CO 0 A Mixed gases 10 A M1 (DIN EN 9) Wire size: mm (.0.06 ) ABIMIG A 1 LW Technical data (EN ): Rating: Duty cycle: 60% CO 00 A Mixed gases A M1 (DIN EN 9) Wire size: 0.9. mm (.0.09 ) For a fixed neck and lightweight air-cooled welding option, the ABIMIG A offers the same lightweight and ergonomic handle design of the rotating AT. For comfort, our handle is contoured for the welder s hand, and the ball socket base creates a greater range of motion in the wrist than most welding torches on the market. Combining this comfort with the lightweight Bikox cable assembly assures an easy to operate gun. And, with the high quality BINZEL consumables, you will churn through less parts while saving on time and cost. 6 Welding as it should be. Designed with the welder in mind.

7 Ordering Chart A F 1 T - L1 S Torch Model Amperage Cable Length Nozzle Wire Size Back End Torch Model A - ABIMIG S - Short Trigger F - Fixed Neck Amperage - 00 Amp ( Model) - 00 Amp ( Model) - 00 Amp (1 Model) Cable Length 10 Feet 1 Feet 0 Feet Feet Nozzle T - Threaded Back End E - Euro L - Lincoln External gas L1 - Lincoln 10, PF7/8 L - Lincoln Power MIG HT - Hobart/Tweco M - Miller Standard M1 - Miller Multimatic X - No connector kit installed Wire Size -.0 Inches -.0 Inches -.0 Inches Inches Inches Inches 1 - & 1 Models - & Models - 1 Models Only 7

8 ABIMIG A LW MIG/MAG Welding Torches Body Cable Assembly ABIMIG A ABIMIG A ABIMIG A 1 1 Nozzle Contact Tip See Page 9 & 10 for complete list of ABIMIG AT and ABIMIG A consumables. Tip holder/diffuser Adapter Piece Swanneck Assembly 60 Degree Complete Trigger only Bikox 10 feet (1 cable shown) 160.H0 160.H H Bikox 1 feet 160.H 160.H8 160.H77 Bikox 0 feet 160.H6 160.H6 160.H Bikox feet 160.H6 160.H Liner See Page 9 & 10 for complete list of ABIMIG AT and ABIMIG A consumables. 10 Cable Support Front 00.D7 00.D7 00.D7* 11 Cable Support Rear D18* 1 Protection Caps () 01.H8 01.H8 01.H8 1 Torch Body Support ** - - N/S Contact Tip Wrench *Cable Support Front and Rear are included in ABIMIG A 1 as part of #8 Bikox cable. **This piece is only required for the ABIMIG A model; two are needed 9

9 ABIMIG MIG/MAG AT Welding & A Lightweight Torches ABIMIG Torches GRIP LW Consumables Torch Model A/AT Series A/AT Series A/AT 1 Series L1 L L Ø A Ø Ø B Ø ØC Ø Nozzles Ø A L1 Part No. Conical recess Ø 1/ 70 mm 1.D01* Conical recess Ø 9/16 70 mm 1.D016 Conical recess Ø /8 70 mm 1.D011 Conical flush Ø 1/ 67mm 1.D01 Conical flush Ø 9/16 67mm 1.D01 * Denotes Factory Standard Ø B L Part No. Ø 1/ 7 mm 1.D0 Ø /8 7 mm 1.D06* Ø / 7 mm 1.D01 Ø 9/16 69 mm 1.D0 Ø /8 69 mm 1.D0 Ø C L Part No. Ø 1/ 8 mm 1.D Ø /8 8 mm 1.D* Ø / 8 mm 1.D A/AT Series 8 mm A/AT & 1 Series 0 mm A/AT 1 Series mm Ø 8 Ø 10 Ø 1 Contact Tips M6 M8 M10) E-Cu Standard Copper E-Cu for Al Standard Copper for Aluminum CuCrZr Heavy Duty Copper Silver-plated Heavy Duty Copper Silver-plated Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø Ø *10.18 Ø *10.08 Ø * Ø *10.07 Ø * Ø.078 * * Ø.09 * * Ø Ø Ø Ø * Ø *17.07 Ø * Ø Ø.09 * * Note: M6 tip is standard on ABIMIG AT and A. M8 tips are standard on ABIMIG AT and A and 1 Series. M10 tips requires tip holder HT-10-C and are optional for ABIMIG AT and A 1. Only 1 Series models can accept.078 and.09 size contact tips. Additional configurations are available. Contact customer service for details at

10 ABIMIG AT & A LW MIG/MAG Welding Torches Consumables Tapered Consumables for ABIMIG Air-cooled Torches Call product department for more details. Nozzle: 1.D0 Tip holder: HTP-6-C Contact tip.00 M6 CU 17 P/N 10.1 Contact tip.0 M6 CU 17 P/N 10.1 Contact tip.0 M6 CU 17 P/N 10.1 Contact tip.0 M6 CZ Silver Plated 17 P/N Contact tip.0 M6 CZ Silver Plated 17 P/N mm mm 6 mm M6 M8 M10 Contact tip holder (10 pcs.) A/AT,, & 1 A/AT * Optional HD M10 available P/N HT-10-C HT-6-C HT-6-C HT-8-C HT-8-C* 1 mm 1 mm 1. mm Ø 16. mm Adapter piece (1 pcs.) ABIMIG A //1 767.D66 ABIMIG AT //1 767.D66 Ø mm Ø 16. mm Ø mm Ø 1.8 mm Ø 8 mm D9 767.D D9 Neck Liners ABIMIG AT Only Torch Liners 10 ABIMIG AT Model Swanneck Item No. (see pgs. & ) Steel Steel Aluminum Aluminum AT S B0 B0 AT S 1.D0 B0 B0 01.H8 S 1.D0 B0 B0 01.H S 1.D0 B0 B0 01.H1 S 1.D0 B0 B0 01.H9 1.D088 1.D H00 SXL S6XL AT 1 01.D 1.D077 1.D078 B0 B0 01.D09 1.D077 1.D078 B0 B0 01.D10 1.D077 1.D078 B0 B D077 1.D078 B0 B0 A/AT & Series A/AT 1 Series Liner Type Wire Size for 1 ft for ft for 1 ft for ft Liner Combi PA liner Carbon PTFE liner Ø SI--17PT SI--8PT SI--17PT SI--8PT Ø SI-6-17PT** SI-6-8PT** SI-6-17PT SI-6-8PT Ø SI PT SI-789-8PT Ø * Ø * Ø * Ø * *1 series torches require collet spacer P/N Item sold separately. ** is not recommended for series torches.

11 Connectors Direct Plug Connector: Miller 1 Allen Wrench.mm O-Rings ( required) Connector Plug Miller Liner Nut MR Direct Plug Connector: Millermatic 1 Allen Wrench.mm O-Rings ( required) Connector Plug Millermatic Liner Nut MR Direct Plug Connector: Hobart/Tweco Trigger Lead Jumper HT Connector Wire 1/ Male Allen Wrench.mm O-Rings ( required) Connector Plug HT Liner Nut HT/LN Direct Plug Connector: Lincoln Gas Hose Assembly Gas Fitting with M6 THD Trigger Lead Jumper LN Allen Wrench.mm Insulator Bushing AC00 AC00 AC00 7 Connector Plug L Liner Nut HT/LN Direct Plug Connector: Lincoln Trigger Lead Jumper LN Allen Wrench. mm O-Rings ( required) Connector Plug HT Liner Nut HT/LN Note: Connector part numbers apply to both ABIMIG AT and ABIMIG A torches. 11

12 T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. Binzel S.A DE C.V. Municipio Pabellon de Arteaga 10 Valle De Aguascalientes, 08 San Francisco de los Romo, Ags. Mexico Phone: +(99) Fax: +(99) info@binzel.com.mx ABICOR BINZEL USA, Inc. 60 Medimmune Court, Suite 110 Frederick, MD 170 Phone: Fax: customerservice@abicorusa.com LIT ABICOR BINZEL USA, Inc. Printed in USA Copyright