Differential Pressure Transmitter using two separate pressure sensors. On the measuring ranges 7,5:1-25:1: max.span

Transcription

1 SATRON VDU differential pressure transmitter belongs to Vseries transmitters. SATRON VDU differential pressure transmitter is used from kpa to 3 MPa ranges (static pressure + measuring range). It is a wire transmitter with HART standard communication. In pressure measuring applications SATRON VDU diff.pressure transmitters are used for measuring the pressure of clean, sedimenting, crystallizing and sticking materials.the transmitter's sensor is piezoresistive. The rangeability is 5:1. TECHNICAL SPECIFICATIONS Measuring range and span See Selection Chart. Zero and Span adjustment Zero elevation: Calibrated span is freely selectable on the specified range. This can be made by using keyboard or HART 75 communicator. Damping Time constant is continuously adjustable,1 to 6 s. Temperature limits Ambient: 3 to + C Process: 3 to +15 C to + C (temp. code H) Shipping and storage: to + C. Operating temperature of display: to +5ºC (does not affect operation of the transmitter) Pressure limits Min. and max. process pressure: See the appended tables. Volumetric displacement <.5 mm 3 /max. span (in both sensors) Output wire (W), ma, user selectable for linear, square root, inverted signal or the transfer function (16 points)specified by the user Supply voltage and permissible load See the load capacity diagram; ma output: 1 35 VDC. Humidity limits 1 % RH; freezing of condensed water not allowed in reference pressure channels. PERFORMANCE SPECIFICATIONS Tested in accordance with IEC 677: Reference conditions, specified span, no range elevation, horizontal mounting; AISI316L diaphragm, silicone oil fill. Accuracy ±. % of calibrated span (span 1:17.5:1 /max.range). On the measuring ranges 7.5:15:1: max.span ±[.+. x ( calibrated span )]% of calibrated span Special accuracy types BA and DA : (Temperature effect on + to +7 C) ±,15 % of calibrated span, only process connections BA and DA / temperature effect code S, for spans 1:17,5:1). 1) Parts in contact with process medium On the measuring ranges 7,5:15:1: max.span ±[.1+.7 x ( )]% of calibrated span calibrated span (incl. nonlinearity, hysteresis and repeatability) Longterm stability ±. % / max. span / year Temperature effect on to + C range Zero and span error: ±.3 % of max. span. on C to + C range (process temperature code H) ± % of max. span, VDU6 ± % of max. span, VDU, VDU5 Temperature effect on + C to +7 C, process connections BA and DA Zero and span error: ±.15 % of max.span, code S Mounting position effect Zero error <.3 kpa, which can be calibrated out. Vibration effect (IEC 66: FC): ±.1 % of measuring range/ g/1 to Hz g/1 to 1 Hz supply effect < ±.1 of calibrated span per volt Insulation test voltage 5 V rms 5 Hz CONSTRUCTION AND CALIBRATION Materials Diaphragm 1) : AISI316L (EN 1.35), Duplex (EN 1.6), Hast. C76 (EN.), CoNialloy, Titanium Gr (EN 3.735), Nickel or Tantalum. Coupling 1) : AISI316L (EN 1.), Duplex (EN 1.6), Hast.C76 (EN.) or Titanium (EN 3.735) Other sensing element materials: AISI316, AISI33. Pressure limits Transmitter type VDU VDU/5 VDU5 VDU5/6 VDU6 Max. overload pressure, MPa Max. operating range (=static pressure +meas. range), kpa Pressure class PN PN PN PN PN1 Filling fluid: Silicone oil, food industry oil or inert oil Enclosure class IP66 M, revision Electronics housing: AISI33/316, Seals: nitrile rubber and Viton, Nameplates: Polyester Calibration For customerspecified range with 1 s. damping. (If range is not specified, transmitter is calibrated for maximum range.) Process connections See Selection Chart Process couplings: See Selection Chart and installation instructions or technical specification: Couplings for Transmitters G15. / Ω Satron Instruments Inc., P.O.Box, FIN3391 Tampere, Finland Tel , Telefax , Operating region Supply voltage /V Min. load using HART communication 5 Ω R max = Supply voltage 1 V I max I max =.5 ma using HART communication I max = 3 ma (when the alarm current,5 ma is on) Min. process pressure Minimum pressure for different fill fluids (kpa, abs) T proc. DC Inert oil C 1 cst

2 91 Ø SATRON VDU Electrical connections Mx1.5, 1/NPT ; screw terminals for.5 to.5 mm wires and with PLUG connector, connector type DIN 365 model AF; Pg9 gland for cable; wire grosssection.5 to 1.5 mm. Product Certifications European Directive Information Dimensions (mm) Electro Magnetic Compatibility (EMC directive /1/EC) All differential pressure transmitters European Pressure Equipment Directive (PED) (97/3/EC) All Differential Pressure Transmitters : Sound Engineering Practice 3 Weight Mounting type DN5 Flange DN SA (Sandvik) Tx (TriClamp) PA (PMC 1") BA, VA, WA UA, VB, WB G1...G Weight / kg Extension code Standard Mx1.5 M1 or PG9 Sensor 1, master Options of the connecting cable: a) M1 connector are situated at the end of sensor 1 and the end of sensor. The material of the cable is PUR. b) Cable is firmly connected to both sensors. The material of the cable is PVC. Cable glands are AISI316. Connecting cable, standard 1 m Max. m 15 M1 or PG9 Sensor, slave Dimensions (mm) Double current output Standard PG9 Plug DIN 365 electrical inlets Standard PG9

3 USB Rx Tx +5V Ext. power in V DC or AC IP USB HART Pw r OK Um+ + V 1 R.1% 15R NOTE! Do no t switch Vsup ON in live circuit 9 R ma L Vsup+ Um+ Vsup Um ma =.V ma = V D C Um Rx R Tx Vsup ON/OFF SATRON VDU Dimensions (mm) Double current output with plug DIN365 connector Standard PG9 Esc Enter ma + + Test 3 1 Wiring one current output Wiring one current output, plug DIN365 connector SiToole US B / HART modem HART I ma Test + Wiring double current output Wiring double current output, plug DIN 365 connector

4 Dimensional drawings (dimensions in mm) d Sensor 1 (master) 75 Sensor (slave) 1 k D Process connections Ax, Dx and Jx, flanged Ø6 Ø Ø115 Ø.1.15 Ø5 Ø115 Ød Sensor 1 : standard Mx1.5 Sensor 1 (master) 5 Sensor (slave) 15 b Process connection UA, Tuchenhagen DN5/ (Varivent ) +.1 Es.3 Process connection SA, Sandvikclamp xø1 3 3 adjustment ±3 Process connection DA, DN5 PN flange with extension, process temperature max. +15 C Code 1 6 E ±. d. +. E Process connections Ax, Dx and Jx, flange with extension +.3 Es. 5, FLANGE SIZE ISO DN5 PN ISO DN5 PN ISO DN PN ISO DN1 PN ANSI 1" 15 lbs ANSI 1" 3 lbs ANSI " 15 lbs ANSI " 3 lbs ANSI 3" 15 lbs ANSI 3" 3 lbs ANSI " 15 lbs ANSI " 3 lbs JIS 1K5 JIS K5 JIS 1K JIS K JIS 1K1 JIS K1 Flange dimens. Holes Extens. b D Ød pcs d k Ød

5 Dimensional drawings (dimensions in mm) Sensor 1 (master) Sensor (slave) 115 Ø6. Process connection PA PMC 1" Sensor 1 (master) 1 Sensor (slave) 15 L Hex 6 7 Ø1,5 M5 x Ø1,5 M5x Hex 6 Process connection BA M5x Process connection BB M5x Process connections TA, TB and TC Triclamp DN ,5 BA extension code L Ø D DN ,5 7 1 A A E Process connection VA and VB SMS3 and SMS Process connection WA and WB SMSSI3 and SMSSI Size 3 Dimensions A Thread Rd 6 x 1/6 Rd 7 x 1/6 Size SI3 SI 5 6 Dimensions A 1 3 E 7 Thread Rd 6 x 1/6 Rd 7 x 1/6

6 Process couplings, G1 thread 7 Transmitter's process sealing G1 thread Three different options are available for the transmitter's process sealing: G1 AISI316L, AISI317L or Duplex diaphragm, oring FPM (Viton) (code G5) EHEDG certified Standard coupling Material: AISI316 L, Titanium or Hastelloy C Special couplings, e.g.: G1 hygienic coupling, M511 G1/A/G1 coupling, M56 G1/A/G1 coupling with venting, M6 G1/A/ G1 couplings with bracket: G1/A male, M565 G1/ female, M55393 SMSSI couplings : L1 L AISI316L, AISI317L or Duplex diaphragm, oring EPDM (code G6) EHEDG certified AISI316L, CoNi, Duplex, Hastelloy C76 or Tantalum diaphragm, metal/metal taper sealing (diaphragm on sealing face) (code G) Coupling M5x with adjust, for process connection BA, order code M1559,5 Ø6 Ød for pipe for vessel Size 3 L1 7 3 Dimensions Ød L 3, Thread Rd 6 x 1/6 Rd 7 x 1/6 Pasve BA working position: For process connections BA3 and BB 1. Transmitter in measuring. Transmitter can be checked, changed, calibrated or the transmitter diaphragm can be flushed Coupling BB M5x, for process connection BB, order code M157 (Welding assistant, code M15) M5x Ø6

7 Process temperature/ C PASVE mounting & service valve All PASVE types are also available with pneumatic actuator, flushing and limit switches Recommended application range (horizontal mounting) PASVE GF (NF) (Flange type) L 55 GP (NP) (Welded on pipe) 66 1 Ø17 Ø7 Ø115 6 ambient temperature/ C R6 6.5 A Process temperature limits, code H Keyboard : Esc = Press Esc move back towards the top of the main menu. = Use the UP arrow key to move up on the current menu level or to increase the selected parameter value. = Use the DOWN arrow key to move down on the current menu level or to decrease the selected parameter value. Enter = Press ENTER to move to a lower level in a menu or to accept a command or parameter value. Satron Instruments Inc., P.O.Box, FIN3391 Tampere, Finland Tel , Telefax , We reserve the right for technical modifications without prior notice. HART is a registered trademark of HART Communication Foundation. Pasve is a trademark of Satron Instruments Inc. Hastelloy is the registered trademark of Haynes International. Teflon is the registered trademark of E.I. du Pont de Nemours & Co. Viton is the registered trademark of DuPont Down Elastomer. Varivent is a registered trademark of GEA Tuchenhagen.

8 Selection Chart Adjustability Span, min Span, max. Measuring range VDU kpa ( mbar) 1 kpa (1 mbar) kpa (1...1 mbar) VDU/5 kpa ( mbar) 5 kpa (5 mbar) kpa (1...5 mbar) VDU5 6.5 kpa (65 mbar) 5 kpa (5 mbar) kpa (1...5 mbar) VDU5/6 6.5 kpa (65 mbar) 1 MPa (1 bar) MPa ( bar) VDU6.15 MPa (1.5 bar ) 3 MPa (3 bar) MPa (1...3 bar ) Output S ma DC/HART D ma DC/HART and with galvanic isolation ma Process connections DA DN5 PN ISO 7 AB ANSI 1" 3 lbs ANSI B165 UA Tuchenhagen DN5/ (Varivent ) PN DB DN5 PN ISO 7 AC ANSI " 15 lbs ANSI B165 PA PMC 1" PN DC DN PN ISO 7 AD ANSI " 3 lbs ANSI B165 SA Sandvik DN7 PN6 DD DN1 PN ISO 7 AE ANSI 3" 15 lbs ANSI B165 BA M5x PN16 JA JIS 1K 5 JIS B AF ANSI 3" 3 lbs ANSI B165 BB M5x PN16 JB JIS K 5 JIS B AG ANSI " 15 lbs ANSI B165 G G1 thread, metal/metal taper sealing JC JIS 1K JIS B AH ANSI " 3 lbs ANSI B165 G5 G1 thread, FPM ring sealing (¹) JD JIS K JIS B TA Triclamp DN3 PN ISO 5 G6 G1 thread, EPDM ring sealing (¹) JE JIS 1K 1 JIS B TB Triclamp DN PN ISO 5 VA SMS 3 JF JIS K 1 JIS B TC Triclamp DN63.5 PN ISO 5 VB SMS AA ANSI 1" 15 lbs ANSI B165 WA SMSSI 3 with extension mm WB SMSSI with extension 7 mm Extension length (Flanged (Sandvik (mm) conn.) conn.) (not proc.conn. SA) 1 3 (only proc.conn. DA1, DN5 PN, max. +15 C) 5.5 (not proc.conn. BB, VA, VB, WA, WB, Tx, UA, PA, DA, G1, G, G) 3 7 (only proc.conn. BA) 1 15 (not proc.conn. BB, VA, VB, WA, WB, Tx, UA, PA, DA, G1, G, G) (not proc.conn. BB, VA, VB, WA, WB, Tx, UA, PA, DA, G1, G, G) Wetted materials Extension or other Diaphragm wetted parts Code Material Code Material Code Material 1 Nickel (x) (*) 5 Tantalum (*) AISI316L AISI316L 6 Titanium (xx) 3 Hast.C 76 3 Hast.C 76 (*) Duplex (*) Duplex Filling oil S Silicone oil G Inert oil A Food industry oil (Neobee M) Housing type, master N Housing with junction box/terminal strip, display, inlet Mx1,5 Explosion proof No explosion proof classification Diaphragm coating Code Material 9 gold/rhodium Y diamond (specify only when coated) Process N C H... + C (*) temperature S C (only process connections BA and DA) Cable between sensors 1 PUR cable with M1 connector both end of cable PVC cable with AISI316/ PG9 inlet, fixed factory mounted Process couplings Material Will be ordered separately AISI316L A With coupling 3 Hast.C76 6 Titanium Duplex Special sizes of electrical inlets (Standard Mx1.5) N 1/ NPT G Pg13.5 P PLUG connector, DIN365 Documentation Calibration certificate AE English Installation and Operating Instructions I E English I F Finnish Material certificates No material certificate MC1 Raw material certificate without appendixes, in accordance with SFSEN 1.1 (DIN 59.1) standard MC Raw material certificate for wetted parts, in accordance with SFSEN 1. (DIN 59.) standard MC3 Raw material certificate for wetted parts, in accordance with SFSEN 13.1 B (DIN B) standard (x) = only with flange (xx) = only with flange and G (¹) = EHEDG certified (*) = not proc.conn. G5 and G6