Guide Specifications Section

Transcription

1 Guide Specifications Section DECORATIVE FILMS LLumar Decorative Series Note: Click on Show/Hide button to reveal "Specifier Notes" throughout section. Delete this text when editing is complete. PART 1 - GENERAL 1.1 RELATED DOCUMENTS The General Conditions, Supplementary Conditions, and Division 01 General Requirements apply. 1.2 SECTION INCLUDES Decorative films [Insert item description.] 1.3 RELATED SECTIONS Section Glazing: Substrate for application of decorative film. Section [xxxxx] [Section Title]: [Include brief description of work specified in another section that is related to the work of this section.] 1.4 REFERENCES ASTM International (ASTM): 1. ASTM D882 - Standard Test Method for Tensile Properties of Thin Plastic Sheeting. 2. ASTM E84 - Test Method for Surface Burning Characteristics of Building Materials. 3. ASTM E903 - Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres. 1.5 DEFINITIONS Visible Light Transmittance: The ratio of the amount of visible light ( nm) that is allowed to pass through a glazing system to the amount of visible light falling on the glazing system. The value is expressed as a percentage. Diffuse Visible Light Reflectance (exterior): The percentage of visible light falling on a flat, nonmirrored surface that is neither transmitted nor absorbed but scattered backwardly at random angles from that surface. This value is also known as non-specular reflectance. Privacy Film Rating: This number, between 0 (clear) and 10 (opaque), represents the relative difficulty an observer has in identifying the nature and character of an object located on the

2 opposite side of the window, with the observer and the object both located at least 2 feet from the pane upon which the product has been installed. E. F. G. H. Frost Series: These films have frosted and translucent finishes that ensure privacy without sacrificing natural light. They are ideal for commercial interior glazing applications such as office partitions or to meet interior design goals at a fraction of the cost of etched glass. Gradient Series: These films are intended to give graduated privacy while still allowing for a sense of openness. Partially block out views, selectively hide unattractive areas or add a fresh design element easily with this versatile series. Pattern Series: These films are scratch-resistant and offer a wide range of aesthetic solutions through varying levels of translucent and opaque whites with a simulated acid-etched appearance. These films also include a broad range of classic patterns. Texture Series: These films refract light and simulate the sparkle and clarity of a textured glass window. These translucent, flexible films are the perfect solution for hard-to-cover specialty windows. Specialty Series: These films mask light, add privacy, or give a pop of color to any space. Bold, graphic hues and distinctive designs enliven retail spaces and commercial properties. Unique combinations of specialty films allow for endless customizable possibilities. 1.6 PERFORMANCE REQUIREMENTS Scratch Resistance: Decorative films shall average less than 12 percent increase in haze when tested according to ASTM D1044 using a Teledyne Taber Abrader using CS10F Type III wheels each loaded to 0.5 kg for 100 cycles in a 70 percent vacuum. 1. Scratch resistance testing shall be performed by an independent third party agency. Surface Burning Characteristics: Provide films that have Flame Spread Index of 0 and Smoke Developed Index of 30 or less when tested in accordance with ASTM E84. Ultraviolet Transmission: Provide decorative films with UV absorbing materials that limit the weighted UV Transmission to [0][1][2][4][5][10][17][25][73][75] percent when measured according to ASTM E903. Provide Decorative films that do not have a masking sheet. 1.7 SUBMITTALS Submit under provisions of Section [ ] [ ]. Product Data: Submit for each product specified indicating: 1. Performance properties. 2. Preparation and installation instructions and recommendations. 3. Storage and handling recommendations. Samples: For each type of decorative film specified, two (2) samples, 12 inches square. Qualification Data: Submit documentation indicating qualifications of decorative film manufacturer.

3 E. F. Operation and Maintenance Data: Submit for decorative film to include in maintenance manuals. Warranty: Submit sample special warranty specified in this section. 1.8 QUALITY ASSURANCE Manufacturer Qualifications: A qualified manufacturer that has a minimum of 05 years of documented experience manufacturing decorative films similar to that used for this project. Installer Qualifications: A firm that is authorized by decorative film manufacturer to install film in accordance with guidelines set forth by the manufacturer. Source Limitations: Obtain each type of decorative film from same manufacturer. Mock-ups: Build mock-ups to verify selections made under sample submittals and to evaluate surface preparation techniques and application workmanship. 1. Construct mock-ups in the location and of the size indicated or, if not indicated, as directed by Architect. 2. Approved mock-ups may become part of the completed work if undisturbed at time of Substantial Completion. E. Pre-installation Conference: Conduct conference at project site to discuss methods and procedures relating to installation of the decorative films. 1.9 DELIVERY, STORAGE AND HANDLING Deliver, store, and handle materials in manufacturer's protective packaging. Store and protect materials according to manufacturer's written recommendations to prevent damage from condensation, temperature changes, direct exposure to sun, or other causes SITE CONDITIONS Ambient Conditions: Maintain temperature, humidity, and ventilation within limits recommended by manufacturer WARRANTY Manufacturer's Warranty: Manufacturer's standard form in which manufacturer agrees to replace films that fail within specified warranty period. 1. Warranty Period: 5 years from date of substantial completion. 2. Warranty coverage limited to owner of property at time of installation. 3. Warranty is in effective as long as film was installed in accordance with manufacturer s instructions on suitable interior surfaces of glass by a duly authorized dealer/installer. 4. Warranty does not apply if (a) the original glass units are altered, damaged or replaced or (b) the film is damaged as a result of improper cleaning and/or maintenance. 5. Manufacturer s obligation is limited to replacement of the non-conforming or defective film (labor and materials). Manufacturer will not be liable for any indirect, incidental or consequential damages.

4 PART 2 - PRODUCTS 2.1 MANUFACTURERS Basis-of-Design Product: The design for decorative films is based on LLumar manufactured by Eastman Chemical Company: Performance Films, 575 Maryville Centre Drive, St. Louis, Missouri 63141; Telephone: ; address: commercialalerts@eastman.com; Web Site: Representative: [Insert contact information.] Substitutions will not be considered. Substitutions will be considered, subject to compliance with requirements of this section, under provisions of Section DECORATIVE FILMS Decorative Film: LLumar NRM80PS2 Decorative Frost Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 79 % Diffuse Visible Light Reflectance (exterior) 19 Privacy Film Rating 5 Mist Decorative Film: LLumar NRMPS2 Decorative Frost Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 73 % Diffuse Visible Light Reflectance (exterior) 25 Privacy Film Rating 7 Frost Decorative Film: LLumar NRM55PS4 Decorative Frost Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 62 % Diffuse Visible Light Reflectance (exterior) 36 Privacy Film Rating inches Glacier Decorative Film: LLumar NRMBPS2 Decorative Frost Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 36 % Diffuse Visible Light Reflectance (exterior) 36 Privacy Film Rating 7

5 Bronze E. Decorative Film: LLumar RMSPS2 Decorative Frost Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 16 % Diffuse Visible Light Reflectance (exterior) 66 Privacy Film Rating 6 Silver F. Decorative Film: LLumar NRMV60FPS3 Decorative Frost Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 55 % Diffuse Visible Light Reflectance (exterior) 34 Privacy Film Rating inches Etched Frost G. Decorative Film: LLumar NRMV80DCPS3 Decorative Frost Film with the following % Visible Light Transmission 87 % Diffuse Visible Light Reflectance (exterior) 11 Privacy Film Rating inches Dusted Crystal H. Decorative Film: LLumar Dusted Crystal Poly Decorative Frost Film with the following % Visible Light Transmission 87 % Diffuse Visible Light Reflectance (exterior) 9 Privacy Film Rating inches Dusted Crystal Poly I. Decorative Film: LLumar Dusted Frost Decorative Frost Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 57 % Diffuse Visible Light Reflectance (exterior) 30 Privacy Film Rating 8 Dusted Frost J. Decorative Film: LLumar Acid Etch Decorative Frost Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 90 % Diffuse Visible Light Reflectance (exterior) 8

6 Privacy Film Rating inches Acid Etch K. Decorative Film: LLumar Silver Shimmer Decorative Frost Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 64 % Diffuse Visible Light Reflectance (exterior) 26 Privacy Film Rating inches Silver Shimmer L. Decorative Film: LLumar Silver Sparkle Decorative Frost Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 70 % Diffuse Visible Light Reflectance (exterior) 19 Privacy Film Rating inches Silver Sparkle M. Decorative Film: LLumar Dot Matrix Decorative Gradient Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission - range % Diffuse Visible Light Reflectance (exterior) - range 8-30 Privacy Film Rating - range 1-7 Dot Matrix Gradient N. Decorative Film: LLumar Mini Dot Matrix Decorative Gradient Film with the following % Visible Light Transmission - range % Diffuse Visible Light Reflectance (exterior) - range 8-30 Privacy Film Rating - range 0-5 Mini Dot Matrix Gradient O. Decorative Film: LLumar Mirrored Mini Dot Matrix Decorative Gradient Film with the following % Visible Light Transmission - range % Diffuse Visible Light Reflectance (exterior) - range 8-30 Privacy Film Rating - range 1-6 Mirrored Mini Dot Matrix Gradient P. Decorative Film: LLumar Grass Blade Decorative Gradient Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear

7 % Visible Light Transmission - range % Diffuse Visible Light Reflectance (exterior) - range 8-30 Privacy Film Rating - range 0-7 Grass Blade Gradient Q. Decorative Film: LLumar Blizzard Decorative Gradient Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission - range % Diffuse Visible Light Reflectance (exterior) - range 8-30 Privacy Film Rating - range 1-5 Blizzard Gradient R. Decorative Film: LLumar Static Decorative Gradient Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission - range % Diffuse Visible Light Reflectance (exterior) - range 8-30 Privacy Film Rating - range 0-6 Static Gradient S. Decorative Film: LLumar Blinds Decorative Gradient Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission - range % Diffuse Visible Light Reflectance (exterior) - range 8-30 Privacy Film Rating - range 0-5 Blinds Gradient T. Decorative Film: LLumar NRMFSSRHPR Decorative Pattern Film with the following % Visible Light Transmission 73 % Diffuse Visible Light Reflectance 20 Privacy Film Rating 1 Stripes U. Decorative Film: LLumar NRMMFSSRHPR Decorative Pattern Film with the following % Visible Light Transmission 63 % Diffuse Visible Light Reflectance (exterior) 35 Privacy Film Rating 8 Matte Stripes

8 V. Decorative Film: LLumar NRMFTLSRHPR Decorative Pattern Film with the following % Visible Light Transmission 73 % Diffuse Visible Light Reflectance (exterior) 20 Privacy Film Rating Thin Lines W. Decorative Film: LLumar NRMFBSRHPR Decorative Pattern Film with the following % Visible Light Transmission 63 % Diffuse Visible Light Reflectance (exterior) 23 Privacy Film Rating 1 Bands X. Decorative Film: LLumar NRMFSQSRHPR Decorative Pattern Film with the following % Visible Light Transmission 69 % Diffuse Visible Light Reflectance (exterior) 20 Privacy Film Rating 1 Squares Y. Decorative Film: LLumar NRMMSQSRHPR Decorative Pattern Film with the following % Visible Light Transmission 61 % Diffuse Visible Light Reflectance (exterior) 25 Privacy Film Rating 8 Matte Squares Z. Decorative Film: LLumar NRMFSDSRHPR Decorative Pattern Film with the following % Visible Light Transmission 82 % Diffuse Visible Light Reflectance (exterior) 13 Privacy Film Rating 2 Small Dots A Decorative Film: LLumar NRMMFSDSRHPR Decorative Pattern Film with the following

9 % Visible Light Transmission 64 % Diffuse Visible Light Reflectance (exterior) 30 Privacy Film Rating inches Matte Small Dots B Decorative Film: LLumar NRMFMDSRHPR Decorative Pattern Film with the following % Visible Light Transmission 81 % Diffuse Visible Light Reflectance (exterior) 15 Privacy Film Rating 1 Mini Dots C Decorative Film: LLumar NRMFRPSRHPR Decorative Pattern Film with the following % Visible Light Transmission 67 % Diffuse Visible Light Reflectance (exterior) 25 Privacy Film Rating 7 Rice Paper D Decorative Film: LLumar NRMFIBGSRHPR Decorative Pattern Film with the following % Visible Light Transmission 67 % Diffuse Visible Light Reflectance (exterior) 31 Privacy Film Rating 9 Fiberglass EE. Decorative Film: LLumar Frosted Sparkle Decorative Pattern Film with the following % Visible Light Transmission 73 % Diffuse Visible Light Reflectance (exterior) 19 Privacy Film Rating inches Frosted Sparkle FF. Decorative Film: LLumar Pinstripes Decorative Pattern Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 74 % Diffuse Visible Light Reflectance (exterior) 13 Privacy Film Rating 3

10 Pinstripes GG. Decorative Film: LLumar Small Etched Stripes Decorative Pattern Film with the following % Visible Light Transmission 82 % Diffuse Visible Light Reflectance (exterior) 14 Privacy Film Rating 2 Small Etched Stripes HH. Decorative Film: LLumar Medium Etched Stripes Decorative Pattern Film with the following % Visible Light Transmission 74 % Diffuse Visible Light Reflectance (exterior) 11 Privacy Film Rating 1 Medium Etched Stripes II. Decorative Film: LLumar Privacy Stripes Decorative Pattern Film with the following % Visible Light Transmission 71 % Diffuse Visible Light Reflectance (exterior) 7 Privacy Film Rating 4 Privacy Stripes JJ. Decorative Film: LLumar Bar Code Decorative Pattern Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 69 % Diffuse Visible Light Reflectance (exterior) 25 Privacy Film Rating 4 Bar Code KK. Decorative Film: LLumar Mini Blinds Decorative Pattern Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 68 % Diffuse Visible Light Reflectance (exterior) 20 Privacy Film Rating 3 Mini Blinds LL. Decorative Film: LLumar Etched Squares Decorative Pattern Film with the following

11 % Visible Light Transmission 77 % Diffuse Visible Light Reflectance (exterior) 100 Privacy Film Rating 1 Etched Squares MM. Decorative Film: LLumar White Wood Grain Decorative Pattern Film with the following % Visible Light Transmission 78 % Diffuse Visible Light Reflectance (exterior) 18 Privacy Film Rating 1 White Wood Grain NN. Decorative Film: LLumar Metro Decorative Pattern Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 65 % Diffuse Visible Light Reflectance (exterior) 27 Privacy Film Rating 7 Metro OO. Decorative Film: LLumar NRMVCGHPR Decorative Texture Film with the following % Visible Light Transmission 84 % Diffuse Visible Light Reflectance (exterior) 9 Privacy Film Rating inches Cracked Glass PP. Decorative Film: LLumar NRMVSCHPR Decorative Texture Film with the following % Visible Light Transmission 89 % Diffuse Visible Light Reflectance (exterior) 9 Privacy Film Rating inches Satin Crystal QQ. Decorative Film: LLumar NRMVBCHPR Decorative Texture Film with the following % Visible Light Transmission 86 % Diffuse Visible Light Reflectance (exterior) 12 Privacy Film Rating inches

12 Brushed Crystal RR. Decorative Film: LLumar Satin Crystal Clear Decorative Texture Film with the following % Visible Light Transmission 90 % Diffuse Visible Light Reflectance (exterior) 9 Privacy Film Rating inches Satin Crystal Clear SS. Decorative Film: LLumar Sandblast Decorative Texture Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 87 % Diffuse Visible Light Reflectance (exterior) 9 Privacy Film Rating inches Sandblast TT. Decorative Film: LLumar Frosted Glass Decorative Texture Film with the following % Visible Light Transmission 88 % Diffuse Visible Light Reflectance (exterior) 9 Privacy Film Rating inches Frosted Glass UU. Decorative Film: LLumar NRMMPS2 Decorative Specialty Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 0 % Diffuse Visible Light Reflectance (exterior) 5 Privacy Film Rating 10 Black VV. Decorative Film: LLumar NRMWPS3 Decorative Specialty Film with the following performance characteristics when applied to the interior surface of single-pane, 1/8-inch clear % Visible Light Transmission 14 % Diffuse Visible Light Reflectance (exterior) 87 % Privacy Film Rating inches White WW.Decorative Film: LLumar REDSRHPR Decorative Specialty Film with the following % Visible Light Transmission 26

13 % Diffuse Visible Light Reflectance (exterior) 6 Privacy Film Rating inches Red XX. Decorative Film: LLumar YELLOWSRHPR Decorative Specialty Film with the following % Visible Light Transmission 85 % Diffuse Visible Light Reflectance (exterior) 9 Privacy Film Rating inches Yellow YY. Decorative Film: LLumar BLUESRHPR Decorative Specialty Film with the following % Visible Light Transmission 28 % Diffuse Visible Light Reflectance (exterior) 6 Privacy Film Rating inches Blue ZZ. Decorative Film: LLumar GREENSRHPR Decorative Specialty Film with the following % Visible Light Transmission 32 % Diffuse Visible Light Reflectance (exterior) 6 Privacy Film Rating inches Green AADecorative Film: LLumar Temporary Black Out Decorative Specialty Film with the following % Visible Light Transmission 0 % Diffuse Visible Light Reflectance (exterior) 5 Privacy Film Rating inches Temporary Black Out BBDecorative Film: LLumar Temporary White Out Decorative Specialty Film with the following % Visible Light Transmission 13 % Diffuse Visible Light Reflectance (exterior) 87 Privacy Film Rating inches

14 Temporary White Out CCDecorative Film: LLumar White Out Diffuser Decorative Specialty Film with the following % Visible Light Transmission 34 % Diffuse Visible Light Reflectance (exterior) 48 Privacy Film Rating inches White Out Diffuser DDDecorative Film: LLumar 100% White Out Decorative Specialty Film with the following % Visible Light Transmission 1 % Diffuse Visible Light Reflectance (exterior) 87 Privacy Film Rating inches 100% White Out 2.3 DECORATIVE FILM ACCESSORIES General: Provide accessories either manufactured by or acceptable to Decorative film manufacturer for application indicated, and with a proven record of compatibility with surfaces contacted in installation. Pressure sensitive adhesive: This adhesive is activated by pressure and water. It is characterized by its permanently tacky nature and its installation ease. Cleaners, Primers, and Sealers: Types recommended by film manufacturer. PART 3 - EXECUTION 3.1 EXAMINATION Examine substrates for compliance with requirements and for conditions affecting performance of Decorative film including glass that is broken, chipped, cracked, abraded, or damaged in any way. Proceed with installation only after unsatisfactory conditions have been corrected. 3.2 PREPARATION Comply with manufacturer s written instructions for surface preparation. Clean substrates thoroughly prior to installation. Prepare substrates using methods recommended by film manufacturer to achieve the best results for the substrate under project conditions. Protect window frames and surrounding surfaces to prevent damage during installation.

15 3.3 INSTALLATION E. F. G. Install in accordance with manufacturer s written instructions. Install film continuously, but not necessarily in one (1) continuous length. Install with no gaps or overlaps. If seamed, make seams non-overlapping. Do not remove release liner from film until just before each piece of film is cut and ready for installation. Custom cut to the glass with neat, square corners and edges to within 1/8-inch of the window frame. Remove air bubbles, blisters, and other defects. Be careful to remove fingers to eliminate any contamination or excess water pockets. It is crucial to remove as much water as possible during installation. A final squeegee pass over the entire pane using a Blue Max Blade with an extended handle design (or Thor s Hammer ) is recommended. 3.4 FIELD QUALITY CONTROL After installation, view film from a distance of 10 feet against a bright uniform sky or background. Film shall appear uniform in appearance with no visible streaks, wrinkles, banding, thin spots or pinholes. If installed film does not meet these criteria, remove and replace with new film. 3.5 CLEANING AND PROTECTION E. Remove excess mounting solution at finished seams, perimeter edges, and adjacent surfaces. Use cleaning methods recommended by film manufacturer. Replace films that cannot be cleaned. Protect installed products until completion of project. Touch-up, repair or replace damaged products before substantial completion.

16 END OF SECTION For inquiries inside the U.S. and Canada Eastman Chemical Company Advanced Materials - Performance Films P.O. Box 5068 Martinsville, Virginia LLUMAR For inquiries outside the U.S. and Canada Contact your regional technical services representative or visit Eastman Chemical Company. LLumar, the LLumar logo, Vista, the Vista logo, EnerLogic, and the EnerLogic logo are trademarks of Eastman Chemical Company or one of its wholly owned subsidiaries. As used herein, denotes registered trademark status in the U.S. only. All other trademarks are the property of their respective owners. (06/16)