MADERA LIVING. Range introduction. Lists of versions

Transcription

1 Range introduction Link to the assembly / user instruction movies MADERA LIVING Live at ease MADERA is made for the discerning and sophisticated consumer. Its charm lies in its particularly intricate form of design: the fine interplay of the joints and tangibly light units impart more spaciousness and light to the room and determine its atmosphere together with the sustainable wood, elegant lacquer surfaces and glass. Contents Page Range introduction, lists of versions 2- pecial combinations 5 uggested combinations Raster lowboards 8-9 Media accessories for lowboards Raster sideboards, Raster roomdivider sideboards, 8 Raster highboards, 9 Raster single units/cabinets, shelf units Raster wall units, Raster wall lowboards, 6 Raster wall panel, 2 Raster angled shelves, 1 Raster top panels, day bed, upholstered cushion 1-15 Accessories for drawers 16 Lamps, remote control, special-sized products 17 Intricate design Graceful intricacy was the focal point in designing MADERA: it takes on an elegant form by virtue of the slender materials in use and the elaborate joints. Elegant solitary units can be assembled to form graceful arrangements. Lacquer meets wood Oak, European maple or core walnut come together in the combinable forms and fronts of MADERA to form a dialogue with high quality lacquers in quartz and anthracite. Decorative glass units bring the intricate character of the range to perfection. Variable functions The non-symmetrical front design of the cabinets, wall units, sideboards and functional units with drawers, flaps or doors is characteristic of MADERA. The lowboards include special cable management features and the infra-red repeater unit is an optional extra. iri wood With MADERA hülsta proves its commitment to the craftsmanlike and intricate processing of a modern and quick growing raw material: iri wood. A solid wooden board of light yet robust iri wood is complemented by hülsta with genuine wood veneers to form a -layer composite that can still be elaborately processed despite the slenderness of the materials in use. General information: Cable apertures 18 Important notes: quality of walls / assembly instruction 19 Lists of versions Model no. Versions Model no. helf units, 2-6 Raster wall units Model no. 2 Raster wall units with glass compartment, angled shelves, top panels European maple Oak natura Core walnut natura European maple Oak natura Core walnut natura Quartz structured lacquer Anthracite structured lacquer ome units with lacquer versions in: Quartz structured lacquer Anthracite structured lacquer Mattresses for day bed, upholstered cushion hülsta cover collection hülsta cover collection: see hülsta cover collection type list! 2 E Wohnen: MADERA

2 Range introduction Explanation of versions Versions of components in wood versions for: Lowboards, components of sideboards, highboards, single units and cabinets, shelf units, wall units, wall panel, top panels MADERA Versions of components in lacquer versions for: Plinths of units, angled shelves, shelf of wall panel, components of sideboards, highboards, single units, wall units and cabinets Light grey shading in the in wood version Wood Dark grey shading in the in lacquer version Lacquer Glass versions: Glass fronts and fitted glass shelves of clear glass. Fitted glass shelves of shelf units, glass shelves of wall panel and the angled shelves in lacquer version Important notes Glass versions: Glass fronts and fitted glass shelves of clear glass. Fitted glass shelves of shelf units, glass shelves of wall panel and of angled shelves in lacquer version tandard interior fittings: Fitted wooden shelves are fitted behind doors at 2 Raster intervals and fitted glass shelves are fitted behind glass doors. Drawer frames in grey Combinations of floor and wall units: If floor and wall units are combined within an arrangement, there must not be any skirting boards in the room near the floor units, otherwise they must be removed. Max. load: Max. load of wooden and glass (fitted) shelves (up to 70. cm width) and drawers: 25 kg Max. load of wooden and glass (fitted) shelves (between 70. and cm width): 15 kg; from cm width: 10 kg Max. load of cover shelves: 5 kg per metre length for floor units. Please also note any maximum loads which may be stated in the type list for the individual units! Wall units: Wall units always incl. wall bracket hülsta-push-to-open: Drawers and flaps with hülsta-push-to-open device Labelling in type list drawings / assembly notes for wall units Labelling in type list drawings / assembly notes for wall units The majority of units have two wall mounting points (= number of base plates), if these are to be fitted as wall units. This is not explicitly mentioned in the type list. If a different number of wall mounting points (= base plates) is required, this is marked in the drawings in the type list with numbers in black boxes. Please be sure to note here the information and notes in the Wall composition chapter! Information on the sketches plit drawer frames: plit drawer frames are used for drawers in front widths of 12.6 cm, 11.2 cm, 176. cm and 19. cm (the partitions are shown by dotted lines in the sketches). The effective interior widths (= compartment widths) of the drawers are illustrated at the sketches of the units so that you can order suitable accessories for the drawers. Wohnen: MADERA E

3 Possible arrangements E Wohnen: MADERA

4 pecial combinations pecial combinations are arrangements that are reduced in price. This price advantage is only available when the arrangement is ordered exactly as described. The special combinations can be enhanced by including accessories. These are charged extra. MADERA The combinations illustrated here are attractive Best ellers. The recommended retail prices for these Best ellers at participating dealers can be found in the separate BETELLER type list! Top bookshelf unit can be reduced in height without surcharge! 28,5 169,6 = Flap = Flap 282,8 88,8 212,0 5,6 8,0 2,0 2,0 8,0 2,0 176, 282,8 Wall lowboard with drawers Wall lowboard with flaps Wall lowboard with 1 drawer, 1 flap and 1 drawer Lowboard with drawers Lowboard with flaps Lowboard with 1 drawer, 1 flap and 1 drawer Top bookshelf unit can be reduced in height without surcharge! 162, 28,5 = Flap 8,0 2,0 282,8 5,2 = Flap 8,0 2,0 2,0 212,0 5,6 The ICONIC AWARD aim to discover and award the best of all interior design areas. Initiated by the German Bundestag and sponsored by the German industry, the Rat für Formgebung (German Design Council) has promoted innovations within interiors for more than 60 years. We are proud to have been given these awards for the new range MADERA. 176, 176, Lowboard with drawers Lowboard with flaps Lowboard with 1 drawer, 1 flap and 1 drawer Wall lowboard with 2 drawers Wall lowboard with 2 flaps Wall lowboard with 1 drawer and 1 flap Light grey shading in the in wood version Wood Dark grey shading in the in lacquer version Lacquer Wohnen: MADERA E

5 uggested combinations Light grey shading in the in wood version As an alternative to planning an individual unit from the complete range there is the possibility of choosing from specially suggested combinations. This eases planning. Incorporating accessories can enhance the suggested combinations. These are charged extra. Wood Dark grey shading in the in lacquer version Lacquer 1 162,7 = Drawer = Flap = Drawer = Flap 282,8 176, 88, 282,8 11,2 11,2 2, ,1 17,6 11,2 11,2 8,0 7,0 2,0 7,0 2,0 8,0 2,0 7,0 28,5 = Drawer = Drawer = Flap 88, 70, 212,2 176, ,7 = Drawer = Flap 185, = Drawer = Flap 27,2 52,8 265,2 70, 19, 8,0 2,0 7,0 2,0 7,0 176, E Wohnen: MADERA

6 uggested combinations MADERA As an alternative to planning an individual unit from the complete range there is the possibility of choosing from specially suggested combinations. This eases planning. Incorporating accessories can enhance the suggested combinations. These are charged extra. 180, = Drawer = Flap 52,8 27,2 8,0 2,0 7,0 176, 176, ,2 = Drawer = Flap 00, 52,8 212,0 8,0 2,0 88, ,7 = Drawer = Flap 176, 18,0 11,2 8,0 2,0 7, Wohnen: MADERA E

7 2 Raster lowboards Light grey shading in the in wood version Wood Dark grey shading in the in lacquer version Lacquer 2 Raster lowboards 5.2 cm high (9.2 cm high incl..0 cm high plinth slat), 8.0 cm deep Incl. centre cable aperture behind flap with flap hinge at bottom in rear wall of each compartment 11.2 cm wide 1 drawer 1 flap 8,2 8, cm wide 1 drawer 1 flap 9,2 9,2 19. cm wide 1 drawer 1 flap at bottom 9, cm wide 176. cm wide 19. cm wide 2 drawers 2 flaps 1 drawer; 1 flap 2 drawers 2 flaps 1 drawer; 1 flap 2 drawers 2 flaps 1 drawer; 1 flap When used as wall units: Max. load: 0 kg at bottom Raster lowboards 5.2 cm high (9.2 cm high incl..0 cm high plinth slat), 2.0 cm deep Incl. centre cable aperture behind flap with flap hinge at bottom in rear wall of each compartment. There is no cable aperture behind flaps with flap hinge at top. at bottom 11.2 cm wide 1 drawer 1 flap ,2 8, cm wide 1 drawer 1 flap ,2 9,2 19. cm wide 1 drawer 1 flap at top 9, cm wide 176. cm wide 19. cm wide 2 drawers 2 flaps 1 drawer; 1 flap 2 drawers 2 flaps 1 drawer; 1 flap 2 drawers 2 flaps 1 drawer; 1 flap at bottom When used as wall units: Max. load: 0 kg at top Wall bracket If units are to be included as wall units, a wall bracket must be ordered. In this case the plinth slat is omitted E Wohnen: MADERA

8 Assembly notes for wall units: Please be sure to note here the information and notes in the Wall composition chapter! 6 MADERA cm wide 27.2 cm wide cm wide drawers flaps 1 drawer; 1 flap; 1 drawer drawers flaps 1 drawer; 1 flap; 1 drawer drawers flaps 1 drawer; 1 flap; 1 drawer cm wide 27.2 cm wide cm wide 2 drawers 2 flaps 1 flap; 1 drawer drawers flaps 1 flap; 2 drawers drawers flaps 1 flap; 2 drawers cm wide 27.2 cm wide cm wide drawers flaps 1 drawer; 1 flap; 1 drawer drawers flaps 1 drawer; 1 flap; 1 drawer drawers flaps 1 drawer; 1 flap; 1 drawer cm wide 2 drawers 2 flaps 1 flap; 1 drawer eparating board If two lowboards are planned next to one another, a separating board (black, looks like a shadow) must be ordered. for 2.0 cm unit depth for 8.0 cm unit depth Wohnen: MADERA E

9 Media accessories for lowboards Functional drawer Functional drawer It is possible to use the 70. cm wide drawers as functional drawers for media devices (against surcharge). Please pay attention to the requirements on free space (heat build-up) stated by electrical manufacturers! for 8.0 cm unit depth 708 IR repeater set IR repeater set Infrared signal transmission set for operating media units behind wooden/lacquered fronts. You can operate all the units in one compartment with one set. The following applies: One set must be used in each compartment. 2 transmitters can also be installed in large compartments in order to increase performance. In this case only one additional transmitter needs to be ordered. The transmitter must be placed in the direct vicinity of the receiver eye of the media unit. Transmissible IR frequency band khz Up to transmitters can be combined with one receiver. It is possible to use transmitters via 1 receiver including Master box. This enables simultaneous operation of different furniture compartments or in critical situations it allows fitting out one furniture compartment with several transmitters in order to increase the performance in this compartment or to operate 2 end units placed next to one another. The IR repeater set consists of: 1 receiver eye (Ø.0 cm) incl. standing bracket 1 electrical transmitter 1 plug EVG 12 V Cable clips Please note the details stated in the operating instructions! IR repeater set 1 receiver eye and 1 transmitter incl. standing bracket 2001 Extra transmitter 200 Cable apertures Cable aperture 1 ilver-coloured; Ø 8.0 cm; It is possible to fit a cable aperture in the cover shelf of lowboards. The cable aperture can be made at the rear of the top shelf. The position is in the centre of the compartment, distance from centre of aperture to rear edge of unit: 10.0 cm 1 Cable aperture 2 ilver-coloured; Ø 8.0 cm; It is possible to fit a cable aperture in the rear wall of lowboards. The position is in the centre of the compartment. 2 Cable aperture 7 ilver-coloured; 7.0 x 12.0 cm; It is possible to fit a cable aperture in the cover shelf of lowboards. The position is in the centre of the compartment, flush with the rear edge of the unit. 7 Cable aperture 8 ilver-coloured; 12.8 x.2 cm; It is possible to fit a cable aperture in the cover shelf of lowboards. The cable aperture is possible in the rear edge of the cover shelf. The position is in the centre of the compartment Cable aperture 20 ilver-coloured; Ø 8.0 cm; It is possible to fit a cable aperture in the centre partitions of lowboards. E Wohnen: MADERA

10 Media accessories for lowboards MADERA Column system, flat screen supports Column system consisting of a metal column (for fitting anywhere on wall) and of audio/dvd support(s), for fitting anywhere on column. Columns of metal; for fitting anywhere on walls above top rim of plinth slat; cables can be laid and hidden at any height; audio/dvd supports can be fitted anywhere on the column. Audio/DVD support of metal; can be positioned at any height on the column and be adjusted to suit audio/dvd players of any size; with rubber padding at front to prevent units from slipping; max. load: 10 kg Example of use: 6.8 cm high 6.1 cm high Flat screen support WTL6 The flat screen support can be adjusted -dimensionally. It is suitable for flat screens with a screen diagonal of cm (0-85 ); max. load: 5 kg. Go to to check if your flat screen can be fitted on this flat screen support. Enter the name WTL6. After a few steps you can see if your flat screen TV is compatible with the flat screen support. uitable for Curved TV s. Flat screen support compatible with VEA Norm standard: min.: 200 x 200 mm max.: 600 x 00 mm Flat screen support THIN 5, ideally adaptable The flat screen support can be adjusted -dimensionally. It is suitable for flat screens with a screen diagonal of cm (0-65 ) and a maximum depth of 5.0 cm; max. load: 25 kg. Go to to check if your flat screen can be fitted on this flat screen support. Enter the name THIN 5. After a few steps you can see if your flat screen TV is compatible with the flat screen support. Not suitable for Curved TV s. Flat screen support compatible with VEA Norm standard: min.: 100 x 100 mm max.: 600 x 00 mm Flat screen support THIN 15 The flat screen support can be angled up to a max. 15. It is suitable for flat screens with a screen diagonal of cm (0-65 ) and a maximum depth of 5.0 cm; max. load: 25 kg. Go to to check if your flat screen can be fitted on this flat screen support. Enter the name THIN 15. After a few steps you can see if your flat screen TV is compatible with the flat screen support. Not suitable for Curved TV s. Flat screen support compatible with VEA Norm standard: min.: 100 x 100 mm max.: 600 x 00 mm for fitting anywhere on wall for fitting on wall panels for fitting anywhere on wall for fitting on wall panels for fitting anywhere on wall for fitting on wall panels Wohnen: MADERA E

11 Raster sideboards Light grey shading in the in wood version Wood Dark grey shading in the in lacquer version Lacquer Raster sideboards 70.6 cm high (7.6 cm high incl..0 cm high plinth slat), 8.0 cm deep 8,2 57,8 57, cm wide cm wide 1 door; drawers 1 door; 2 drawers; 1 flap (bottom right) 1 door; drawers 1 door; 2 drawers; 1 flap (bottom right) When used as wall units: Max. load: 0 kg at bottom Wall bracket If units are to be included as wall units, a wall bracket must be ordered. In this case the plinth slat is omitted Raster room-divider sideboards Raster room-divider sideboards 70.6 cm high (7.6 cm high incl..0 cm high plinth slat), 51.0 cm deep 8,2 8, cm wide cm wide 1 flap with glass panel; 2 drawers 1 flap with glass panel; 2 drawers at bottom 8 Raster highboards 8 Raster highboards cm high (12.2 cm high incl..0 cm high plinth slat), 2.0 cm deep 70. cm wide cm wide 1 flap; drawers drawers drawers 1 flap; drawers at bottom 12 E Wohnen: MADERA

12 MADERA 57,8 57,8 75, 75, 8,2 8, cm wide cm wide 27.2 cm wide 1 door; 2 drawers 1 door; 1 drawer; 1 flap (bottom right) 1 door; 2 drawers 1 door; 1 drawer; 1 flap (bottom right) drawers drawers; 1 flap (bottom right) Raster single units / cabinets 9 Raster single units / cabinets 16.2 cm high (168.2 cm high incl..0 cm high plinth slat), 2.0 cm deep 1, 1, L L 9,0 9, cm wide 52.8 cm wide 88. cm wide 88. cm wide 1 door; 1 drawer 1 door with glass panel; 1 drawer 2 doors; 2 drawers 1 door with glass panel; 1 door; 2 drawers L R L R Bookshelf units Bookshelf units 5.2 cm wide; 2.2 cm deep Fitted glass shelves in lacquer version; max. load: 5 kg Examples of use: Fitted glass shelf for bookshelf units 0.8 cm thick; 19.8 cm deep; fitted glass shelves in lacquer version For each project please remember to leave a 1.5 cm gap to the ceiling for assembly! Max. load: 5 kg Height: 2.8 cm 28.8 cm 52.5 cm cm for 5.2 cm width Wohnen: MADERA E L/R = Door hinge left/right 1

13 2-6 Raster wall units Light grey shading in the in wood version Wood Dark grey shading in the in lacquer version Lacquer 2 Raster wall units 5.2 cm high; 2.0 cm deep 6 Raster wall unit 11. cm high; 2.0 cm deep 8,2 57,8 57, cm wide 176. cm wide 1 drawer with glass panel 1 flap with glass panel 1 drawer with glass panel 1 flap with glass panel Max. load: 25 kg Wall units or wall assembly: ee here the information on page 19. at bottom Raster wall lowboards Raster wall lowboards 52.9 cm high; 8.0 cm deep cm wide 27.2 cm wide Max. load: 0 kg Wall units or wall assembly: ee here the information on page 19. at bottom 5 drawers flaps; 2 drawers 2 drawers; 1 flap; 2 drawers 5 drawers flaps; 2 drawers 2 drawers; 1 flap; 2 drawers Raster wall panel 6 Raster wall panel 99.2 cm high; 5.0 cm thick; Glass shelf: 0.8 cm thick; 2.2 cm deep; Total depth: 7.2 cm Glass shelf of wall panel in lacquer version Max. load: 0 kg Max. load of glass shelf: 11 kg Wall units or wall assembly: ee here the information on page cm wide Raster angled shelves 2 Raster angled shelves 5.5 cm high; 7.0 cm deep Glass shelf of angled shelves in lacquer version 70. cm wide cm wide 11.2 cm wide 176. cm wide 19. cm wide cm wide 27.2 cm wide cm wide Max. load:.5 kg Max. load: 5 kg Max. load: 7 kg Max. load: 9 kg Max. load: 10 kg Max. load: 11 kg Max. load: 12.5 kg Max. load: 1 kg cm deep E Wohnen: MADERA

14 Assembly notes for wall units: Please be sure to note here the information and notes in the Wall composition chapter! 6 MADERA 19. cm wide 88. cm wide 1 drawer with glass panel 1 flap with glass panel 1 door; 1 door with glass panel; 1 drawer ,2 5 drawers cm wide flaps; 2 drawers 2 drawers; 1 flap; 2 drawers Raster top panels 1 Raster top panels 17.5 cm high; 5.0 cm thick Top panels for fitting on lowboards or sideboards 11.2 cm wide 176. cm wide 19. cm wide cm wide 27.2 cm wide cm wide Day bed, upholstered cushion Day bed approx. 55 cm high; 200 cm long; 100 cm wide Type no. incl. hülstaflex comfort A base frame (fixed, not adjustable) and TopPoint 500 mattress with furniture fabric cover in firmness class 2 (medium) For information on base frames and mattresses see leeping ystems type list. hülsta cover collection: see hülsta cover collection type list, please state the required version clearly in the order! Bed sizes: Height of top rim of bed side: 5.5 cm pace to floor: approx. 2 cm with cover in fabric gr. I with cover in fabric gr. II with cover in fabric gr. III Upholstered cushion with furniture fabric cover Ø approx. 19 cm with cover in fabric gr. I 8010 hülsta cover collection: see hülsta cover collection type list, please state the required version clearly in the order! for day bed width 100 cm with cover in fabric gr. II 8010 Wohnen: MADERA E with cover in fabric gr. III

15 Accessories Accessories for drawers Tableau lined with grey fabric for 1. cm compartment width for 9.0 cm compartment width for 57.8 cm compartment width for 66.6 cm compartment width for 75. cm compartment width for 8.2 cm compartment width for 9.2 cm compartment width for cm compartment width for 2.0 cm unit depth for 8.0 cm unit depth CD holder for drawers Please state exactly in your order and drawing in which 2 Raster drawer the CD holder is to be fitted. for 2.0 cm unit depth for 8.0 cm unit depth DVD/Blu-Ray holder for drawers Please state exactly in your order and drawing in which 2 Raster drawer the DVD/Blu-Ray holder is to be fitted. for 2.0 cm unit depth for 8.0 cm unit depth Cutlery box of metal, lined with grey fabric inside; incl. compartments 17.6 cm wide 5.2 cm wide Cutlery holder lined with grey fabric, for fitting in drawers et 1: for standard cutlery like spoons, forks, knives, etc. et 2: for sauce ladles, cake forks, cake servers, etc. 16 et 1: for 60 pcs of cutlery et 2: for 17 serving utensils E Wohnen: MADERA

16 Accessories Lamps This luminaire contains built-in LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V LED light strip for fitting under wall units and angled shelves for 70. cm unit width for 88. cm unit width for cm unit width MADERA LED lamps incl. footswitch. A remote control unit is possible for operation (against a surcharge; see below). for 11.2 cm unit width for 176. cm unit width for 19. cm unit width for cm unit width for 27.2 cm unit width for cm unit width 6. W 8. W 9.6 W 1.0 W 16. W 18. W 20.2 W 2.6 W 26.9 W Integrated LED spotlamp Ø 7.1 cm; for fitting in units 2.9 W 791 Remote control unit with changing colours The lamps are normally operated by an external footswitch. The colour temperature of the LED lamps is cold white if a footswitch is used. A -channel remote control unit is also available as an alternative, which is charged extra. everal lamps can be operated with each of the channels. All channels can be dimmed separately at the push of a button. The colour temperature of all channels can be set to any level from cold white (approx kelvin = the basic setting of the LED lamps) to warm white (approx kelvin). If warm white is required, a remote control unit must be ordered. It is also possible to switch all channels on and off simultaneously with the all on or all off buttons. Up to transmitters can operate as many receivers as required. The remote control unit consists of one transmitter and one receiver. If several receivers are required because of the arrangement of the units, these and the corresponding cables are provided ex-works (no surcharge). The footswitch is omitted when the remote control unit is used MADERA pecial products are possible on request. Please get in touch with your customer advisor. Wohnen: MADERA E

17 Cable apertures It is possible to provide the cover shelves, side sections, shelves, etc, in units from nearly all the hülsta living room ranges with cable apertures so it is easier to feed cables of electronic equipment through these units. There are four different types of cable apertures to choose from, as listed here. Please be sure to follow the important notes. Cable aperture 1 Cable aperture 2 Cable aperture Cable aperture 20 Cable aperture for 80 mm hole, silver colour tandard cable aperture; particularly suitable for cover shelves, side sections and shelves Dimensions: Assembly height: 21 mm Outside diameter: 92 mm Inside diameter: 7 mm Diameter of hole: 80 mm Cable aperture for 80 mm hole, silver colour particularly suitable for rear walls and side sections Dimensions: Assembly height: 8 mm Outside diameter: 92 mm Inside diameter: 7 mm Diameter of hole: 80 mm Cable aperture for 60 mm hole, silver colour particularly suitable for shelves and constructional shelves (suitable to an extent for scart cables) Dimensions: Assembly height: 21 mm Outside diameter: 72 mm Inside diameter: 5 mm Diameter of hole: 60 mm Cable aperture for 80 mm hole, silver colour particularly suitable for side-panels and centre partitions Dimensions: Assembly height: 2x 8 mm Outside diameter: 92 mm Inside diameter: 7 mm Diameter of hole: 80 mm IMPORTANT NOTE Please be sure to note! Please be sure to state the exact position of the cable aperture in your order (always measure distances from the centre of the cable aperture). For wall units the cable aperture is only possible in the bottom position (due to the suspension brackets). Forcover shelves, the position of the cable aperture is determined in the factory, in accordance with factors specific to the given range. The same applies to technical exceptions because of custom-based planning. The 20 is positioned in the centre (depthwise) in the side-panel. Please state the exact height (centre of hole of cable aperture from bottom rim of side-panel)! ubject to technical progress. The minimum distance for the cable aperture (measured from the inside): 100 mm from the side and 70 mm from the rear (for horizontal surfaces) or 100 mm from the side and 70 mm from the base (for vertical surfaces). Please state if the aperture is to be fitted at the left, at the right or in the centre. tandard position: If no details of the exact position of the cable aperture are given in your order, the cable aperture is always fitted at the bottom centre or at the rear centre of the relevant surface, whereby the distances stated above still apply. Caution! Please note that the cable aperture can not be fitted where there is an integrated or front spotlamp, centre partitions or a split rear wall. Please be sure to observe the following explanatory diagrams! for vertical surfaces Minimum distance 100 mm from the side and 70 mm from the base for horizontal surfaces Minimum distance 100 mm from the side and 70 mm from the rear 70 mm 70 mm 70 mm 100 mm 100 mm 100 mm 70 mm 100 mm tandard position at the centre of the surface and 70 mm from the base tandard position at the centre of the surface and 70 mm from the rear at the centre 70 mm at the centre 70 mm Caution! If there is an integrated or front spotlamp in a shelf, for example, the cable aperture cannot be fitted at this position! Cable aperture not possible here! Caution! If there is a centre partition, for example, between two shelves, the cable aperture cannot be fitted at this position! Cable aperture not possible here! 18 E Wohnen: MADERA

18 Important notes MADERA Wall composition / assembly instruction Important notes: The composition of walls must be ascertained before concluding a contract and be checked by a qualified fitter before assembly takes place. Assembly may only be carried out by a qualified fitter under careful observation of the assembly instructions. The plastic Rawl plugs with the type name X 8 x 65 from the Fischer Company supplied by hülsta as a standard set are only suitable for concrete C12/15, if the wall composition and compression strength corresponds to the table below. Under no circumstances must a unit be assembled on light masonry. Furthermore, we provide a mounting set with assembly mortar from the Fischer Company for the types of walls listed below (see assembly mortar set below). Again, assembly must be carried out by a qualified fitter under careful observation of the wall composition and assembly instruction. The compression strength levels stated below must be met under all circumstances. Materials table with a description of which sets are to be used with the following types of walls: tandard set (X 8 x 65) Assembly mortar set only suitable for the materials stated below! Concrete C12/15 Compression strength 15 N/mm² Building bricks Mz 12 Compression strength 12 N/mm² olid blocks of light concrete V2 Compression strength 2 N/mm² Limestone blocks 12 Compression strength 12 N/mm² Perforated blocks of light concrete Hbl 2 Compression strength 2 N/mm² Perforated sand lime bricks L12 Compression strength 12 N/mm² Aerated concrete PP2 Compression strength 2 N/mm² Vertically perforated bricks HLz 12 Compression strength 12 N/mm² Bulk density 1.0 kg/dm³ A different and more suitable type of mounting must be chosen by a qualified fitter in all other cases. hülsta cannot accept any responsibility for the choice of any other types of mounting! Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over especially when alternative mounting materials acquired on site have been used. Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. Mounting sets Labelling in type list drawings / assembly notes for wall units The majority of units have two wall mounting points (= number of support boards), if these are to be fitted as wall units. This is not explicitly mentioned in the type list. If a different number of wall mounting points (= support boards) is required, this is marked in the drawings in the type list with numbers in black boxes. Every support board requires four mounting screws. = support boards = support boards, etc. One assembly mortar set is sufficient for up to a maximum of support boards or wall side-panels. Important note: Depending on the composition of the wall (see wall types illustrated above), assembly must be carried out using the special assembly mortar set and a standard trade mastic tool which are the basic essentials for safe and clean workmanship. tandard set The standard set consists of plastic Rawl plugs (X 8 x 65) and mounting screws and is sufficient for 1 support board. The standard sets are included in the packet of fittings to match the number of support boards. Assembly mortar set for up to a maximum of support boards consisting of: 9x injection retaining sleeve 9x screw-in sleeve 1x injection cartridge 2x static mixer 1x assembly instructions Please use the mounting screws from the standard set (supplied free of charge). Wohnen: MADERA E Example of order: Add up number of support boards for all existing unit types Divide the sum by Round up the result to a full number = Number of assembly mortar sets required M2 19