Type. Listings: The luminaire is NRTL certified to UL 1598 and 8750 standards for wet locations. CSA 22.2#

Size: px

Start display at page:

Download "Type. Listings: The luminaire is NRTL certified to UL 1598 and 8750 standards for wet locations. CSA 22.2#"

Irene Page
6 years ago
Views:

Type Job design. per formance. technology Approvals SPECIFICATIONS Intended Use: The Alpha luminaire is a high performance LED lighting solution designed with optical versatility.

1 Type Job design. per formance. technology Approvals SPECIFICATIONS Intended Use: The Alpha luminaire is a high performance LED lighting solution designed with optical versatility. It is intended to be used to reduce energy and maintenance costs associated with legacy HID lighting technology. Markets include large areas requiring perimeter lighting, security lighting, truck terminals, car lots, recreational sports lighting, airport ramp lighting, and building flood lighting. Construction: Housing, electrical compartment and fitter are all made from die case aluminum that is pre-treated and powder-coated to meet the most rugged industry standards. LED/Optics: Provides the best combination of vertical and horizontal illumination while reducing light behind the poles. Features revolutionary individual LED optical control based on high performance TIR optical designs. Features a protective lens cover. The precisely-designed optics result in fewer poles and fixtures that use less energy, leading to lower life-cycle costs along with lower up front installation costs. Electrical: Fixture electrical compartment contains all LED driver components and is provided with a push-button terminal block for AC power connections. Optional 7-pin ANSI C twist-lock photo control receptacle that is compatible with ANSI C36.4 external wireless control devices. 20kA surge protection Lifeshield Circuit - protects luminaire from excessive temperature by interfacing with the 0-0V dimmable drivers to reduce drive current as necessary. The factory-preset temperature limits are designed to ensure maximum hours of operation to assure L70 rated lumen maintenance. Installation: Adjustable knuckle is designed to slip fit a 2 3/8 to 3 O.D. tenon. Specialized knuckle provides continuous aiming adjustment without the use of cast serrations. Luminaire can adjust from 30 to 90 from horizontal when in the upright position (only when Twist Lock photocell is not being used). Photo control option can only be used when fixture is aimed below horizontal position. The luminaire must be mounted in the upright position as pictured. Finish: IFS polyester powder-coat electro- statically applied and thermocured. IFS finish consists of a five stage pretreatment regimen with a polymer primer sealer and top coated with a thermoset super TGIC polyester powder coat finish. The finish meets the AAMA 2604 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists surface impacts of up to 60 inch-pounds. Listings: The luminaire is NRTL certified to UL 598 and 8750 standards for wet locations. CSA 22.2# PRODUCT IMAGE(S) DIMENSIONS 9 3/8 6 3/8 4 5/8 FLOODLIGHT Cat.# 5/8 ALPHA Warranty: Five year limited warranty for more information visit: Standard SF3 mount Slips 2 3/8 to 3 O.D. Tenon 0 90 Controls/Options: Available with Energeni for optional set dimming, timed dimming with simple delay, or timed dimming based on time of night (see products/energeni). In addition, Alpha can be specified with SiteSync wireless control system for reduction in energy and maintenance cost while optimizing light quality 24/7. See ordering information or visit for more details 0 30 CERTIFICATIONS/LISTINGS Weight: 27.0 lbs (2.25 kg) design. per formance. technology EPA.32 ft2

ORDERING INFORMATION ORDERING EXAMPLE: AL-U/72L-70/5K7/4X4/UNV/PEC/SWP/FL/PM/BBT SERIES AL-D Alpha, down light AL-U Alpha, up light ENGINE-WATTS 24L-55 55W, LED array 36L-80 80W, LED array 60L-36

2 ORDERING INFORMATION ORDERING EXAMPLE: AL-U/72L-70/5K7/4X4/UNV/PEC/SWP/FL/PM/BBT SERIES AL-D Alpha, down light AL-U Alpha, up light ENGINE-WATTS 24L-55 55W, LED array 36L-80 80W, LED array 60L-36 36W, 72L-70 70W, 72L W, 72L W, CCT/CRI 3K7 3000K, 70 CRI 4K7 4000K, 70 CRI 5K7 5000K, 70 CRI OPTICS 2X2 narrow spot 4X4 narrow flood 5X5 medium flood 6X6 wide flood 5X3 horizontal flood 3X5 vertical flood VOLTAGE UNV -277V 347V 8 347V 480V 8 480V Not 347V or 480V input 2 Available on 24NB-55, 72NB-70, and 72NB-220 only 3 PCR-TL and PCR-SC not available on AL-U 4 When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni brochure and instructions for setting table and options. Not available with sensor options. 5 Must specify group and zone information at time of order. See for further details. 6 Not available with other control or sensor options. 7 Available on 72NB-70 and 72NB-220 versions only versions only PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating schedules. For more detailed information please visit or contact Hubbell Lighting tech support at (800) Examples: AL-U/60NB-36/5K/4X4/UNV/PEC/SWP/FL/PM/BBT SiteSync only SiteSync Lighting Control is available from our most popular brands in a broad range of award-winning product families. ELECTRICAL OPTIONS PEC photocell, button PCR-TL 3 twist lock receptacle with photo control PCR-SC 3 twist lock receptacle with shorting cap 2PF,2 dual power feed CONTROL OPTIONS GENI-XX 4 energeni SWP 5,6,7 Catalog Number SWUSB* SWTAB* SiteSync Wireless Pre-Commission SHIELD OPTIONS FL full louver FV full visor HL half louver HV half visor DesignLights Consortium qualified. Consult DLC website for more details: FINISH BBT basic black textured BMT black matte textured WHT white textured MBT metallic bronze textured BZT bronze textured DBT dark bronze textured GYS gray smooth DPS dark platinum smooth GNT green textured MST metallic silver textured MTT metallic titanium textured OWI old world iron RAL MOUNTING OPTIONS SF3 Fixture slip fits 2 3/8 OD tenon (tenon by others) PM 3 pier mount (includes 2 3/8 OD tenon and mounting plate) WM wall mount (J-arm tenon and mounting plate included) Accessories and Services (Ordered Separately) Description SiteSync interface software loaded on USB flash drive for use with owner supplied PC (Windows based only). Includes SiteSync license, software and USB radio bridge node. Windows tablet and SiteSync interface software. Includes tablet with preloaded software, SiteSync license and USB radio bridge node. SWBRG + SiteSync USB radio bridge node only. Order if a replacement is required or if an extra bridge node is requested. * When ordering SiteSync at least one of these two interface options must be ordered per project. + If needed, an additional Bridge Node can be ordered. Hubbell Control Solutions - Accessories (sold separately) Catalog Number Description HCS System NXOFM-RD-UNV WIR-RME-L On-fixture Module (7-pin), On / Off / Dim, Daylight Sensor with HubbNET Radio and Bluetooth Radio, -480VAC On-fixture Module (7-pin or 5-pin), On / Off / Dim, Daylight Sensor with wiscape Radio, 0-480VAC NX Distributed Intelligence wiscape Lighting Control For additional information related to these accessories please visit Options provided for use with integrated sensor, please view specification sheet ordering information table for details.

3 PHOTOMETRICS 2x2 Narrow Spot AL-U-72L-295-5K7-2X2 8' 8' 2fc 9' 9' 5fc 0.5' 4x4 Narrow Flood AL-U-72L-295-5K7-4X4 2' 2' 2fc 0.5' 5fc 2.5' 5x5 Medium Flood AL-U-72L-295-5K7-5X5 25' 25' 2fc 5fc 2.5' 9' 9' 0.5' 0.5' 2.5' 2.5' 8' 8' 8' 9' 0' 9' 8' Scale (spec between gridlines): 9ft Set back: 22ft 2' 2' 2' 0.5' 0' 0.5' 2' Scale (spec between gridlines): 0.5ft Set back: 30 25' 25' 25' 2.5' 0' 2.5' 25' Scale (spec between gridlines): 2.5ft Set back: 35 5x3 Horizontal Flood AL-U-72L-295-5K7-5X3 20' 20' 3x5 Vertical Flood AL-U-72L-295-5K7-3X5 20' 20' 6x6 Wide Flood AL-U-72L-295-5K7-6X6 45' 45' 0' 0' 5fc 2fc 0' 0' 0' 0' 5fc 2fc 0' 0' 30' 30' 2fc 5' 5' 5fc 20' 20' 20' 0' 20' Scale (space between gridlines): 0ft Set back: 20 20' 20' 20' 0' 20' Scale (space between gridlines): 0ft Set back: 20 5' 5' 30' 5' 0' 5' 30' Scale (space between gridlines): 5ft Set back: 30

4 PERFORMANCE DATA # LED S DRIVE (MILLIAMPS) SYSTEM WATTS -277V mA 55W mA 80W mA 36W mA 70W mA 220W 72 50mA 295W 5K7 (5000K nominal, 70 CRI) 4K7 (4000K nominal, 70 CRI) 3K7 (3000K nominal, 70 CRI) DISTRIBUTION TYPE FIELD ANGLE H X V LUMENS LPW MAX BEAM CANDLEPOWER LUMENS LPW MAX BEAM CANDLEPOWER LUMENS LPW MAX BEAM CANDLEPOWER 2X2 30 X X4 56 X X5 92 X X6 07 X X3 44 X X5 7 X X2 30 X X4 56 X X5 92 X X6 07 X X3 44 X X5 7 X X2 30 X X4 56 X X5 92 X X6 07 X 07" X3 44 X X5 7 X X2 30 X X4 56 X X5 92 X X6 07 X X3 44 X X5 7 X X2 30 X X4 56 X X5 92 X X6 07 X X3 44 X X5 7 X X2 30 X X4 56 X X5 92 X X6 07 X X3 44 X X5 7 X Lumen values are from photometric tests performed in accordance with IESNA LM Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-user environment and application.

5 ELECTRICAL DATA # OF LEDS NUMBER OF DRIVERS DRIVE (ma) ma ma ma ma ma mA INPUT VOLTAGE (V) SYSTEM POWER (W) (Amps) PROJECTED LUMEN MAINTENANCE AMBIENT TEMP. 0 25,000 50,000 TM-2-60,000 00,000 Calculated L70 (HOURS) 25 C / 77 C >470,000 Projected per IESNA TM-2- Data references the extrapolated performance projections for the base model in a 25 C ambient, based on 0,000 hours of LED testing per IESNA LM AMBIENT TEMPERATURE LUMEN MULTIPLIER 0 C 32 F.02 0 C 50 F.0 20 C 68 F C 77 F C 86 F C 04 F 0.98 Use these factors to determine relative lumen output for average ambient temperatures from 0-40 C (32-04 F). SHIELD OPTIONS MOUNTING OPTIONS Full Louver Full Visor 9 3/8 4 5/8 Half Louver Half Visor Standard SF3 mount Slips 2 3/8 to 3 O.D. Tenon 3 Pier Mount (PM) 2 3/8 tenon on a 2 X2 square mounting plate 20 /2 3/4 26 /2 4 5/8 6 /2 8 /2 8 Wall Mount (WM) J-arm is mounted to the plate and included (hardware to attach fixture to the J-arm is included but hardware not included to attach to the wall) Mounting plate provided with (4), pre-drilled, 3/8 diameter holes.

6 ALPHA SERIES Cat.# Type Job design. per formance. technology Approvals FLOODLIGHT The Alpha luminaire is a high performance LED lighting solution designed with optical versatility. It is intended to be used to reduce energy and maintenance costs associated with legacy HID lighting technology. Markets include large areas requiring perimeter lighting, security lighting, truck terminals, car lots, recreational sports lighting, airport ramp lighting, and building flood lighting. Construction: Housing, electrical compartment and fitter are all made from die case aluminum that is pre-treated and powder-coated to meet the most rugged industry standards. LED/Optics: Provides the best combination of vertical and horizontal illumination while reducing light behind the poles. Features revolutionary individual LED optical control based on high performance TIR optical designs. Features a protective lens cover. The precisely-designed optics result in fewer poles and fixtures that use less energy, leading to lower life-cycle costs along with lower up front installation costs. Electrical: Fixture electrical compartment contains all LED driver components and is provided with a push-button terminal block for AC power connections. Optional 7-pin ANSI C twist-lock photo control receptacle that is compatible with ANSI C36.4 external wireless control devices. 20kA surge protection Lifeshield Circuit - protects luminaire from excessive temperature by interfacing with the 0-0V dimmable drivers to reduce drive current as necessary. The factory-preset temperature limits are designed to ensure maximum hours of operation to assure L70 rated lumen maintenance. horizontal when in the upright position (only when Twist Lock photocell is not being used). For photo control use when aimed below horizontal position Luminaire must be mounted in the upright position as pictured. Finish: IFS polyester powder-coat electro- statically applied and thermocured. IFS finish consists of a five stage pretreatment regimen with a polymer primer sealer and top coated with a thermoset super TGIC polyester powder coat finish. The finish meets the AAMA performance specification which includes passing a 3000 hour salt spray test for corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists surface impacts of up to 60 inch-pounds. PRODUCT IMAGE(S) DIMENSIONS Listings: The luminaire is NRTL certified to UL 598 and 8750 standards for wet locations. CSA 22.2# for wet locations 9 3/8 6 3/8 PREVIOUS VERSION Warranty: Five year limited warranty for more information visit: 5/8 Intended Use: 4 5/8 SPECIFICATIONS Standard SF3 mount Slips 2 3/8 to 3 O.D. Tenon 0 30 Controls/Options: Available with Energeni for optional set dimming, timed dimming with simple delay, or timed dimming based on time of night (see products/energeni). In addition, Alpha can be specified with SiteSync wireless control system for reduction in energy and maintenance cost while optimizing light quality 24/7. See ordering information or visit for more details 0 Installation: Adjustable knuckle is designed to slip fit a 2 3/8 to 3 O.D. tenon. Specialized knuckle provides continuous aiming adjustment without the use of cast serrations. Luminaire can adjust from 30 to 90 from 90 CERTIFICATIONS/LISTINGS Weight: 27.0 lbs (2.25 kg) design. per formance. technology EPA.32 ft2

7 ORDERING INFORMATION ORDERING EXAMPLE: AL-U/72NB-70/5K/4X4/UNV/PEC/SWP/FL/PM/BBT SERIES AL-D Alpha, down light AL-U Alpha, up light ENGINE-WATTS 24NB-55 55W, LED array 36NB-80 80W, LED array 60NB-36 36W, 72NB-70 70W, 72NB W, 72NB W, LED COLOR VOLTAGE 3K 3000K UNV -277V 4K 4000K 347V 8 347V 5K 5000K 480V 8 480V OPTICS 2X2 narrow spot 4X4 narrow flood 5X5 medium flood 6X6 wide flood 6X4 wide flood 5X3 horizontal flood 3X5 vertical flood ELECTRICAL OPTIONS PEC photocell, button PCR-TL 3 twist lock receptacle with photo control PCR-SC 3 twist lock receptacle with shorting cap 2PF,2 dual power feed CONTROL OPTIONS GENI-XX 4 energeni SWP 5,6,7 SiteSync Wireless Pre-Commission SHIELD OPTIONS FL full louver FV full visor HL half louver FINISH BBT basic black textured BMT black matte textured WHT white textured MBT metallic bronze textured BZT bronze textured DBT dark bronze textured GYS gray smooth DPS dark platinum smooth GNT green textured MST metallic silver textured MTT metallic titanium textured OWI old world iron RAL HV half visor Not 347V or 480V input 2 Available on 24NB-55, 72NB-70, and 72NB-220 only 3 PCR-TL and PCR-SC not available on AL-U 4 When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni brochure and instructions for setting table and options. Not available with sensor options. 5 Must specify group and zone information at time of order. See for further details. 6 Not available with other control or sensor options. 7 Available on 72NB-70 and 72NB-220 versions only versions only Catalog Number PRECOMMISSIONED SITESYNC ORDERING INFORMATION: When ordering a fixture with the SiteSync lighting control option, additional information will be required to complete the order. The SiteSync Commissioning Form or alternate schedule information must be completed. This form includes Project location, Group information, and Operating PREVIOUS VERSION SWUSB* schedules. For more detailed information please visit or contact Hubbell Lighting tech support at (800) SWTAB* Examples: AL-U/60NB-36/5K/4X4/UNV/PEC/SWP/FL/PM/BBT SiteSync only SWBRG + Accessories and Services (Ordered Separately) Description MOUNTING OPTIONS WM wall mount PM 3 pier mount SF3 2 3/8 OD tenon (std.) SiteSync loaded on USB flash drive (Windows based only) SiteSync Windows Tablet SiteSync Wireless Bridge Node * When ordering with SiteSync, one of the following interface options must be chosen and ordered separately. Each option contains the SiteSync License, GUI and Bridge Node. + If needed, an additional Bridge Node can be ordered. SiteSync Lighting Control is available from our most popular brands in a broad range of award-winning product families.

8 PHOTOMETRICS 2x2 Narrow Spot AL-U-60NB-36-5K-2X2 5x3 Horizontal Flood AL-U-60NB-36-5K-5X3 4x4 Narrow Flood AL-U-60NB-36-5K-4X4 3x5 Vertical Flood AL-U-60NB-36-5K-3X5 5x5 Medium Flood AL-U-60NB-36-5K-5X5 6x4 Wide Flood AL-U-60NB-36-5K-6X4 PREVIOUS VERSION 6x6 Wide Flood AL-U-60NB-36-5K-6X6 design. per formance. technology

9 PERFORMANCE DATA # LED S DRIVE (MILLIAMPS) SYSTEM WATTS -277V mA 55W mA 80W mA 36W mA 70W mA 220W 72 50mA 295w 5K (5000K nominal, 70 CRI) 4K (4000K nominal, 70 CRI) 3K (3000K nominal, 70 CRI) DISTRIBUTION TYPE FIELD ANGLE H X V LUMENS LPW MAX BEAM CANDLEPOWER LUMENS LPW MAX BEAM CANDLEPOWER LUMENS LPW MAX BEAM CANDLEPOWER 2X2 33 X X4 53 X X5 97 X X6 08 X X4 X X3 88 X X5 99 X X2 33 X X4 53 X X5 97 X X6 08 X X4 X X3 88 X X5 99 X X2 33 X X4 53 X X5 97 X X6 08 X X4 X X3 88 X X5 99 X X2 33 X X4 53 X X5 97 X 97 PREVIOUS VERSION X6 08 X X4 X X3 88 X X5 99 X X2 33 X X4 53 X X5 97 X X6 08 X X4 X X3 88 X X5 99 X X2 33 X X4 53 X X5 97 X X6 08 X X4 X X3 88 X X5 99 X Lumen values are from photometric tests performed in accordance with IESNA LM Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-user environment and application.

10 ELECTRICAL DATA NUMBER OF # OF LEDS DRIVERS DRIVE (ma) ma ma ma ma ma mA INPUT VOLTAGE (V) SYSTEM POWER (w) (Amps) PROJECTED LUMEN MAINTENANCE AMBIENT TEMP. 0 25,000 50,000 TM-2-60,000 00,000 Calculated L70 (HOURS) 25 C / 77 C >470,000 Projected per IESNA TM-2- Data references the extrapolated performance projections for the base model in a 25 C ambient, based on 0,000 hours of LED testing per IESNA LM AMBIENT TEMPERATURE LUMEN MULTIPLIER 0 C 32 F.02 0 C 50 F.0 20 C 68 F C 77 F C 86 F C 04 F 0.98 Use these factors to determine relative lumen output for average ambient temperatures from 0-40 C (32-04 F). PREVIOUS VERSION SHIELD OPTIONS MOUNTING OPTIONS Full Louver Full Visor 9 3/8 4 5/8 Half Louver Half Visor Standard SF3 mount Slips 2 3/8 to 3 O.D. Tenon 3 Pier Mount (PM)

ARX25 Without Lens ArcheType X Site/Area kl_arx25_nolens_spec.pdf

ARX25 Without Lens ArcheType X Site/Area kl_arx25_nolens_spec.pdf JOB TYPE NOTES APPROVALS FEATURES Independently aim able LEAR modules 355 rotation and 70 tilt module adjustment Wide range of drive currents available Design software interface for user-defined Type X