VIENTO LARGE SITE & AREA LED LUMINAIRE

Transcription

1 OJT INFORMATION Project Name Date VIENTO LARGE Catalog # PLICATIONS Auto Dealership Sales Lots Parking Lots Educational/Business Campuses Type Parks & Recreation Areas Security Areas Mall & Retail Spaces OVALS ETL listed Complies with UL 598 and CSA C No Suitable for wet locations 3G Vibration Rated for Bridge/Overpass Applications per ANSI C363-00, Test Level IP 66 Optics and Housing Select models DLC Qualified For a complete list of DLC Qualified products, please visit: wwwxtralightcom/dlc or wwwdesignlightsorg/qpl ODUCT PERFORMANCE MODEL LUMENS EFFICACY TEN YEAR WARRANTY FEATURES Outstanding photometric performance results in sites with excellent uniformity, optimal pole spacing and lower power density Optics are completely sealed against moisture and environmental contaminants (IP66) Low profile architectural design offers a contemporary appearance with excellent light output Field serviceable luminaire utilizing Lumileds LED technology Controls ready luminaire for independent operation or remote management Operating temperature -40 C to +40 C (-40 F to +04 F) CONSTRUCTION Housing: One-piece die-cast aluminum has integral heat sink fins to optimize thermal management through conductive and convective cooling The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life Housing and door are protected with a thermoset TGIC-polyester powder coat finish using a tightly controlled multi-stage process to a uniform 3 mil thickness (min) This finish provides superior protection from corrosion and maximum environmental durability MOUNTING Integral arm facilitates quick and easy installation Stainless steel hardware fastens the integral arm securely to poles VNT- L 3 & 300* Over Up to 6 * For detailed information see page OPTICS Precision molded optics for superior uniformity, minimal light trespass and maximum pole spacing Optical grade polymer is UV stabilized and impact resistant IP66 rated LED light engines prevent dust and moisture from degrading performance Distributions: Type II, Type III, Type IV and Type V Types II, III, and IV available rotated right or left 90, factory installed Best in class Lumileds LEDs with 3000K, 4000K, 5000K and 5700K CCT (min 70 CRI) Zero uplight (U0) is night sky friendly, reduces wasted light Lumen Maintenance: >00,000hrs 5 C (see page for details) ELTRICAL Voltage: 0-77V 50/60Hz driver (standard); V 50/60Hz driver (optional) Class electronic drivers are designed to have a power factor >90%, THD <0%, and an expected life of 00,000 hours with <% failure rate Surge Protection: 0kV/0kA standard NEMA twist-lock receptacle available as an option Photocontrol or shorting cap required for operation, but not included Dimming: 0-0v dimmable driver available as an option Occupancy (PIR) sensor available as an option WARRANTY 0-year limited warranty ROTATABLE OPTICS

2 DISTRIBUTION TYPES ISO Lines Distance in Units of Mounting Height Values Based on 3 Foot Mounting Height Type II Medium Type II Short Type III Medium Type IV Short Type V Square Medium LUMEN CHARTS 5000K CCT Type II Medium 3 ATAL0737 B3-U0-G ATAL0737 B3-U0-G Type II Short Type V Square Medium 3 ATAL07369 B3-U0-G ATAL07370 B3-U0-G Type III Medium 3 ATAL07373 B3-U0-G ATAL07374 B3-U0-G Type IV Short 3 ATAL07375 B3-U0-G ATAL07376 B3-U0-G ATAL07377 B5-U0-G ATAL07378 B5-U0-G Additional CCT Information Lumen Maintenance vs Ambient Temperature Ambient ( C) TM- Lumen Maintenance (60,000 hrs) Theoretical L70 Hours Calculated Lumen Maintenance 5K hr 50K hr 75K hr 00K hr % 76, % 98% 8699% 84% % 6, % 909% 8573% 8083% % 48, % 8999% 844% 799% % 37, % 890% 8305% 7749% * Lumen maintenance calculations based on test report ATAL044 Lumen Multiplier vs Ambient Ambient ( C) Lumen Multiplier Lumen Multiplier vs CCT CCT Multiplier 3000K K K K 099

3 LIGHTING CONTROLS Passive Infrared (PIR) Photo/Motion Sensor Adjustable Control Parameters [Defaults] HIGH Mode - sensor detects motion, light output will RAMP UP to HIGH [DEFAULT = 0V] LOW Mode - sensor stops detecting motion, TIME DELAY expires, light output will FADE DOWN to LOW [DEFAULT = V] TIME DELAY - period that must elapse after sensor stops detecting motion, resuming LOW mode [DEFAULT = 5 MINUTES] CUT OFF - period that must elapse after resuming LOW mode before luminaire is switched OFF [DEFAULT = HOUR] SENSITIVITY - response of the PIR to motion within the sensor coverage area [DEFAULT = MAXIMUM] SETPOINT - when enabled, the selectable ambient light level that will hold the luminaire OFF or LOW when motion is detected [DEFAULT = DISABLED] PHOTOCELL - when enabled, sensor will force the load OFF after the ambient light has exceeded the SETPOINT for at least one minute, or ON when the ambient light level goes below the SETPOINT [DEFAULT = DISABLED] RAMP UP TIME - period for light output to change from LOW to HIGH [DEFAULT = DISABLED, instantly to HIGH] FADE DOWN TIME - period for light output to change from HIGH to LOW [DEFAULT = DISABLED, instantly to LOW] LOCK SETTINGS - time delayed IR communication lock initiated from a FSIR-00 handheld remote to prevent unauthorized changes to the parameters [DEFAULT = DISABLED] Sensor Coverage Options 5' 5' Ceiling 40 ft OPTION B FSP-L3 Mounting Height 4 Diameter 8' 5' ' 9' 6' 3' 3' 6' 9' ' 5' 8' 5 5' 5' 5' 0 OPTION D FSP-L7 40 Mounting Height 00 Diameter 7' ' 5' 5 3

4 ORDER LOGIC VNT LED Size & Combinations: VNT-LED-L-03-3 VNT-LED-L Sample part no: VNT-LED-L M-N-UIN-4-0-X-X-BZ-HO L 03 HO MODULES OPTICS DRIVER SURGE MOUNT HIGH OUTPUT 03 M Type II Medium UIN Multi-Volt 0-77V (Std) 0 0kV/0kA (Std) X None HO S Type II Short DIM Dimmable Multi-Volt 3M Type III Medium 0-77V 4S Type IV Short HVU V 5M Type V Square HVD 5 Dimmable V Medium 0 0kV/0kA A Angle Mount SIZE MODEL ORIENTATION CCT CONTROLS COLOR OPTIONS L Large 3 4 N Normal K X None (STD) BZ Bronze HS House Side Shield 300 (Forward) K 3 Twist-Lock Receptacle, 3-pin WH White R Right K 5,3 Twist-Lock Receptacle, 5-pin L Left S 5700K 7,3 Twist-Lock Receptacle, 7-pin B 3 D 3 FSP-L3@MH/4DIA FSP-L7@40 MH/00 DIA Not available with 5M optics Photocontrol not included 3 Requires 0-0V dimming driver [DIM] or [HVD] option 4 3 not available with [DIM], [HVU], or [HVD] 5 [HVD] driver options are not DLC listed Rotated Asymmetric Optics (Type II, Type III & Type IV) Normal (3MN) 90 Left (3ML) Street Side House Side Right (3MR) House Side Street Side House Side Street Side 4

5 VIENTO LARGE DIMENSIONAL DATA EPA: 384 sq ft E: TITL TE DA OTH DIME ER TO NS W ISE FR LERA IONS AC NC SP AN TIO ES ARE IFIED IN TW GULA NA : IN : CH TH O PL R: L RE M ES E PL ACE AC AC DI H DR E DE M BE AW ND CI AL N CH KE EN D G MFG Q A ME NA Back View LESS UN IAL NT IDE NF D CO RY TA AN Side View Front View RIE 35 L x 38 W x 66 H Three at 0 MAL GE ING OMETR PE R: IC INT TO ER LERA ET NC 39 lbs OP IFIED AW DR SP ES ER INCH OTH E IN AR LESS ND NS : BE IO NS NCES H L DIMELERA NA AC MALAL TIO R: M DI M TO CI AC FR GULA ACE E DE IC AN O PL AC ETR TW E PL RE UN E: TITL G EN MFG A Q DUAL SSA Bottom View D KE CH TH OM R: GE PE ET ING NC ER INT LERA TO EPA: 069 sq ft IAL NT IDE NF D CO RY TA RIE AN OP Two at 80 Three at 90 EPA: 39 sq ft Four at 90 EPA: 447 sq ft EPA: 447 sq ft MOUNTING DATA Back Mounting Detail 4 0 DIA DIA EPA: 68 sq ft EPA: 79 sq ft Two at 90 SINGLE 34 0 DIA 400 most updated product specifications XtraLight reserves the right to change specifications without notice 5 TE DA ME NA N : WISE

6 5 VIENTO LARGE HOUSE SIDE SHIELD OPTICS ACCESSORY FEATURES Significantly reduces backlight to minimize light trespass Available for Type II Medium (M), Type II Short (S), Type III Medium (3M) and Type IV Short (4S) optics, both NORMAL and rotated LEFT/RIGHT Factory installed as an option when ordered with the luminaire Field installable (tool-free) when ordered as a separate accessory CONSTRUCTION Low-profile, precision fabricated CNC design Flat black TGIC-polyester powder coat finish using tightly controlled multi-stage process to a uniform 3 mil thickness (min) This finish provides superior protection from corrosion and maximum environmental durability DIMENSIONS 38 L x 63 W x 04 H DISTRIBUTION TYPES ISO Lines Type II Medium + HSS 045 lbs Distance in Units of Mounting Height Values Based on 5 Foot Mounting Height Type II Short + HSS Type III Medium + HSS Type IV Short + HSS LUMEN CHART 5000K CCT Optic Type + HSS 00 TYPE II M ATAL05436 B-U0-G3 4, TYPE II S ATAL05344 B-U0-G 3, TYPE III M ATAL05345 B-U0-G3 4, TYPE IV S ATAL05347 B-U0-G3 3,

7 MOUNTING ACCESSOR Standard in Bronze and White (custom colors available, consult factory) ø Shoulder to Shoulder Adaptor SSA EPA: 090 sq ft - 7 lbs Tenon Mount Adaptor - Square or Round TMAS 4 /5 /6 SQ TMAR 4 /5 DIA* EPA: 04 sq ft 0-6 lbs Wall Bracket VNT-WB 3 *Requires Round Pole Adaptor VNT-RPA Round Pole Adaptor VNT-RPA 3 to 5 Diameter EPA: 003 sq ft lbs Adjustable Slip Fitter VNT-ASF (80-0 increments) EPA: 07 sq ft - 60 lbs The Round Pole Adapter allows for up to 4 Viento fixtures to be mounted to one pole (3 dia shown) 40 max NOTES: Viento with ASF accessory needs to be ordered with "A" mounting code (see Ordering Guide for details) Note: No more than 40 up angle 7